10515 lines
781 KiB
JSON
10515 lines
781 KiB
JSON
{
|
||
"= '": " = ' ",
|
||
"(0 = default (~0.03); minimum noise strength for k-diffusion noise scheduler)": "(0 = 默认 (~0.03); k-diffusion 噪声调度器的最小噪声强度)",
|
||
"(0 = default (~14.6); maximum noise strength for k-diffusion noise schedule)": "(0 = 默认 (~14.6); k-diffusion 噪声调度器的最大噪声强度)",
|
||
"(0 = default (~14.6); maximum noise strength for k-diffusion noise scheduler)": "(0 = 默认 (~14.6); k-diffusion 噪声调度器的最大噪声强度)",
|
||
"(0 = default (7 for karras, 1 for polyexponential); higher values result in a more steep noise schedule (decreases faster))": "(0 = 默认 (karras 选择 7, polyexponential 选择 1); 值越高噪声调度曲线越陡峭 (递减更快速))",
|
||
"(0 = default (7 for karras, 1 for polyexponential); higher values result in a steeper noise schedule (decreases faster))": "(0 = 默认 (karras 设置 7, polyexponential 设置 1); 值越高会得到越陡峭的噪声调度曲线 (递减更快速))",
|
||
"(0 = disable)": "(0 = 禁用)",
|
||
"(0: disable, -1: show all images. Too many images can cause lag)": "(0: 禁用, -1: 显示全部图像。过多图像会导致网页滞后)",
|
||
"(0 = disabled (default); should be lower than denoising strength)": "(0 = 禁用 (默认); 设置的数值应小于重绘幅度)",
|
||
"(0=disable, higher=faster)": "(0 = 禁用, 数值越大 = 越快速)",
|
||
"(0 = inf; end value of the sigma range; only applies to Euler, Heun, and DPM2)": "(0 = inf; sigma 波动范围的最大值; 仅作用于 Euler, Heun, 和 DPM2 采样方法)",
|
||
"(0 = maximum effect; 1 = minimum effect)": "(0 = 最大强度; 1 = 最小强度)",
|
||
"(0 = No limit)": "(0 = 无限制)",
|
||
"(0 = no tiling)": "(0 = 不分块)",
|
||
"10. Generate": "10. 生成",
|
||
"10th": "单元 10",
|
||
"{1-3$$artist1|artist2|artist3}": "{1-3$$艺术家1|艺术家2|艺术家3}",
|
||
"180 Degree Rotation": "180 度旋轉",
|
||
"1. Add URL and retrieve Model Info": "1. 添加链接并检索模型信息",
|
||
"1. Create your wildcard library by copying a collection using the dropdown below.": "1. 使用下方的下拉選單選擇一個選集，並按下複製選集來創建您的萬用字源庫。",
|
||
"(1) Face Detection": "(1) 脸部识别",
|
||
"1. Get Model Info by Civitai Url": "从 Civitai 链接拉取模型信息",
|
||
"1. Get your key at": "1. 访问后面的网址获得你的 Key ",
|
||
"1. Go to img2img tab": "1. 前往 图生图 选项卡",
|
||
"-1 means that it is calculated automatically. If both are -1, the size will be the same as the source size.": "-1 意味着自动计算。如果宽高都是 -1，则将与源视频尺寸相同。",
|
||
"(1 = original size)": "(1 = 原始尺寸)",
|
||
"1st": "单元 1",
|
||
"1st and last digit must be 0 and values should be between 0 and 1. ex:'0, 0.01, 0'": "第1和最後一個數字必須是 0，並且值應該在 0 和 1 之間。 ex：'0, 0.01, 0",
|
||
"1st and last digit must be 1. ex:'1, 2, 1'": "第一個和最後一個數字必須是 1。例：'1, 2, 1'",
|
||
"1. The tags common to all displayed images are shown in comma separated style.": "1. 所有显示图像的共同标签要用逗号分隔的样式显示。\n\n ",
|
||
"{2$$__artist__}": "{2$$__艺术家__}",
|
||
"{2$$artist1|artist2|artist3}": "{2$$艺术家1|艺术家2|艺术家3}",
|
||
"{2$$__artist__|__artist__}": "{2$$__艺术家__|__艺术家_}",
|
||
"{2::artist1|artist2}": "{2::艺术家1|艺术家2}",
|
||
"2. Click on any of the files that appear in the tree to edit them.": "2. 點擊上方選項中出現的文件進行編輯。",
|
||
"(2) Crop and Resize the Faces": "(2) 裁切和调整脸部大小",
|
||
"2D & 3D operator to move canvas left/right in pixels per frame": "以每帧多少像素为单位向左/向右移动画布的 2D&3D 操作",
|
||
"2D & 3D operator to move canvas up/down in pixels per frame": "以每帧多少像素为单位向上/向下移动画布的 2D&3D 操作",
|
||
"2D and 3D settings": "2D 与 3D 设定",
|
||
"2D operator that scales the canvas size, multiplicatively. [static = 1.0]": "缩放画布大小的2D操作符，以倍数缩放。[static=1.0]",
|
||
"2D operator to rotate canvas clockwise/anticlockwise in degrees per frame": "2D 操作器对每帧动画顺时针/逆时针旋转所指定的角度",
|
||
"2D or 3D animation_mode": " 2D 或 3D 动画模式中",
|
||
"2nd": "单元 2",
|
||
"2. Pick Subfolder and Model Version": "2. 选择子文件夹和模型版本",
|
||
"2. Refresh checkpoint list after authentication to get available checkpoints": "2. 完成认证后刷新 CheckPoint 列表获得可用的 CheckPoint",
|
||
"2. Select [ebsynth utility] in the script combo box": "2. 在脚本框里选择 [ebsynth utility]",
|
||
"2. When changes are applied, all tags in each displayed images are replaced.": "当应用更改时，所有所显示的图像的标签将会被替换",
|
||
"360 Panorama to 3D": "360°全景图转 3D",
|
||
"3D Fov settings:": "3D 视野设置:",
|
||
"3d glb": "3D (GLB 格式)",
|
||
"3D Mesh": "3D 网格",
|
||
"3D Model": "3D 模型",
|
||
"3D Openpose": "3D 骨架模型编辑 （3D Openpose）",
|
||
"3D operator to move canvas towards/away from view [speed set by FOV]": "将画布靠近/远离镜头的 3D 操作 [速度由视场角设置决定]",
|
||
"3D operator to pan canvas left/right in degrees per frame": "以每帧为单位向左/向右偏移画布的 3D 操作",
|
||
"3D operator to roll canvas clockwise/anticlockwise": "顺时针/逆时针滚动画布的 3D 操作",
|
||
"3D operator to tilt canvas up/down in degrees per frame": "以每帧为单位向上/向下倾斜画布的 3D 操作",
|
||
"3. Download Model": "下载模型",
|
||
"3D settings": "3D 设定",
|
||
"3. Fill in the \"Project directory\" field with ": "3. 在“工程目录”框中填写 ",
|
||
"3. Generate without making your GPU go brrrr!": "3. 生成时不会让你的 GPU 发出咆哮！",
|
||
"3. If you change some tags into blank, they will be erased.": "如果你更改某些标签到空白处，他们将会被移除",
|
||
"3rd": "单元 3",
|
||
"(3) Recreate the Faces": "(3) 脸部重绘",
|
||
"4. If you add some tags to the end, they will be added to the end/beginning of the text file.": "如果你将一些标签添加至末端，它们将被添加在文本文件的开始/末尾。",
|
||
"(4) Paste the Faces": "(4) 脸部融合",
|
||
"4. Select in the \"Mask Mode(Override img2img Mask mode)\" field with ": "4. 在“蒙版模式（覆盖图生图的蒙版模式）”中选择 ",
|
||
"4th": "单元 4",
|
||
"512x Model": "512x 模型",
|
||
"(5) Blend the entire image": "(5) 全图重绘融合",
|
||
"5. Changes are not applied to the text files until the \"Save all changes\" button is pressed.": "在按下保存所有更改的按钮之前，所有在文本文件中所做的更改将不会生效",
|
||
"5. I recommend to fill in the \"Width\" field with ": "5. 建议将“宽度”设置为 ",
|
||
"5th": "单元 5",
|
||
"6. I recommend to fill in the \"Height\" field with ": "6. 建议将“高度”设置为 ",
|
||
"6th": "单元 6",
|
||
"7. I recommend to fill in the \"Denoising strength\" field with lower than 0.35": "7. 建议将“重绘幅度”设置为小于0.35",
|
||
"7th": "单元 7",
|
||
"8. Fill in the remaining configuration fields of img2img. No image and mask settings are required.": "8. 填写图生图其他的设置。不需要设置图像和蒙版。",
|
||
"8th": "单元 8",
|
||
"90 Degree Rotation": "90 度旋轉",
|
||
"9. Drop any image onto the img2img main screen. This is necessary to avoid errors, but does not affect the results of img2img.": "9. 拖拽任意图片到图生图主窗口。这样做能有效避免错误，但不会影响图生图的结果。",
|
||
"9th": "单元 9",
|
||
"(A10) Primary": "(A10) 主要",
|
||
"A1111 txt2img (Euler a)": "AUTOMATIC1111 webui 文生图 (Euler a 采样方法)",
|
||
"(A1) Primary": "(A1) 主要",
|
||
"(A2) Primary": "(A2) 主要",
|
||
"(A3) Primary": "(A3) 主要",
|
||
"(A4) Primary": "(A4) 主要",
|
||
"(A5) Primary": "(A5) 主要",
|
||
"(A6) Primary": "(A6) 主要",
|
||
"(A7) Primary": "(A7) 主要",
|
||
"(A8) Primary": "(A8) 主要",
|
||
"(A9) Primary": "(A9) 主要",
|
||
"A, B or C": "A, B 或 C",
|
||
"💡 About": "💡 关于",
|
||
"About": "关于",
|
||
"Above": "上方",
|
||
"Abs": "绝对值",
|
||
"Absolute": "绝对",
|
||
"abs. path or url to audio file": "音频文件的绝对路径或 URL",
|
||
"abstract": "abstract (抽象艺术)",
|
||
"Abstract": "Abstract (抽象)",
|
||
"Accelerate with OpenVINO": "Accelerate with OpenVINO (OpenVINO 加速)",
|
||
"Accent": "强调色",
|
||
"Accent color": "强调色",
|
||
"Accent Generate Button": "强调生成按钮",
|
||
"Access results in ‘Open results’.": "点击“打开最终效果图”获取增强后的图片",
|
||
"According to Live preview subject setting": "实时预览主体设置",
|
||
"according to the mask opacity.": ", 根据蒙版不透明度",
|
||
"Accumulation steps": "累加步數",
|
||
"Action": "動作",
|
||
"Action for existing captions": "对已有标签的操作",
|
||
"Action on existing caption": "对已有标注的操作",
|
||
"Actions": "動作",
|
||
"Activate Selected Script": "激活选定脚本",
|
||
"Activation keywords, comma-separated": "觸發提示詞，以逗號分隔",
|
||
"Activation text": "啟動文字",
|
||
"Active": "启用",
|
||
"Active in img2img": "在图生图激活",
|
||
"Active in img2img (Requires restart)": "在圖生圖中啟用（需要儲存設定並重新啟動）",
|
||
"Active in negative prompts": "在反向提示词输入框激活",
|
||
"Active in negative prompts (Requires restart)": "在反向提示詞中啟用（需要儲存設定並重新啟動）",
|
||
"Active in third party textboxes": "在第三方扩展文本输入框激活",
|
||
"Active in third party textboxes [Dataset Tag Editor] [Image Browser] [Tagger] [Multidiffusion Upscaler] (Requires restart)": "在第三方文本框中激活标签自动补全 [数据集标签编辑器 (Dataset Tag Editor)] [图库浏览器] [WD1.4标签器(Tagger)] [Multidiffusion 超分辨率] (需重启)",
|
||
"Active in third party textboxes [Dataset Tag Editor] (Requires restart)": "在第三方擴充功能「數據集標記編輯器」的文字方塊中啟用（需要儲存設定並重新啟動）",
|
||
"Active in txt2img": "在文生图激活",
|
||
"Active in txt2img (Requires restart)": "在文生圖中啟用（需要儲存設定並重新啟動）",
|
||
"Active Layer Only": "仅发送图层",
|
||
"Active: peak amount of video memory used during generation (excluding cached data)": "活动：生成过程中使用的显存峰值（不含缓存数据）",
|
||
"A custom name to use when saving .ckpt and .pt files. Subdirectories will also be named this.": "一个在保存 .ckpt 和 .pt 文件时使用的自定义名称。子目录也会以此命名。",
|
||
"Adam Weight Decay": "Adam 权重衰减 (Weight Decay)",
|
||
"AdamW Weight Decay": "AdamW 权重衰减 (Weight Decay)",
|
||
"Adaptive (Gaussian)": "自适应（高斯）",
|
||
"Adaptive (Mean)": "自适应（平均值）",
|
||
"add": "新增",
|
||
"➕ Add": "➕ 添加",
|
||
"Add": "加入",
|
||
"Add additional prompting to the prefix, suffix and negative prompt in this screen. The actual prompt fields are ignored.": "在此场景下添加附加提示词到前缀、后缀、反向提示词。实际的提示词段会被忽略。",
|
||
"Add additional prompts to the head": "在起始添加额外的提示词",
|
||
"Add ALL Displayed": "添加所有当前显示的图片",
|
||
"add APIs": "添加 API",
|
||
"Add a prompt prefix, suffix and the negative prompt in the respective fields. They will be automatically added during processing.": "在相应的字段中添加提示词前缀、后缀和反向提示词。它们会在处理过程中被自动添加。",
|
||
"Add a second progress bar to the console that shows progress for an entire job.": "向控制台加入第二個進度列，顯示整個作業的進度",
|
||
"Add a spaces after comma": "逗号后添加一个空格",
|
||
"Add a '/' to the beginning of directory buttons": "将 '/' 添加到文件夹按钮的开始处",
|
||
"add audio to video from file/url or init video": "从文件/链接或初始视频中提取音频以完成添加",
|
||
"Add background image": "添加背景图片",
|
||
"Add Background image": "加入背景圖像",
|
||
"Add Background Image": "添加背景图片",
|
||
"Add Blur": "添加模糊",
|
||
"Add Custom Mappings": "添加自定义映射",
|
||
"Add Detail": "添加细节",
|
||
"Add difference": "加入差分",
|
||
"Add difference:A+(B-C)*alpha": "差额叠加: A+(B-C)*α",
|
||
"Added": "已添加",
|
||
"Add extended info (seed, prompt) to filename when saving grid": "儲存宮格圖時，將擴展資訊（隨機種子，提示詞）加入到檔案名",
|
||
"(Add folder names that shouldn't be searched for wildcards, separated by comma.)": "(为通配符文件夹添加不会被搜索的名称，并以逗号分隔)",
|
||
"Add hypernetwork to prompt": "將超網路加入至提示詞",
|
||
"Add hypernetwork to prompt: refresh": "将 hypernetwork 添加到提示词: 刷新",
|
||
"Add image number to grid": "將圖像編號添加到網格中",
|
||
"Add inpaint batch mask directory to enable inpaint batch processing.": "新增修補批次遮罩目錄以啟用批次處理修補功能。",
|
||
"Additional cli arguments to pass to ComfyUI (requires reload UI. Do NOT prepend --comfyui-, these are directly forwarded to comfyui)": "ComfyUI 附加的额外启动参数 (需要重载 UI。请勿在此添加 --comfyui- 前缀)",
|
||
"Additional components": "附加组件",
|
||
"Additional description": "附加说明",
|
||
"Additional Generation Info": "附加生成信息",
|
||
"Additional Networks": "附加網路（LoRA擴充功能）",
|
||
"Additional options": "附加选项",
|
||
"Additional tags (comma split)": "附加标签 (逗号分隔)",
|
||
"Additional tags (split by comma)": "附加标签 (逗号分隔)",
|
||
"Add last frame to keyframes": "设置最后一帧为关键帧",
|
||
"Add layer normalization": "加入層歸一化",
|
||
"Add Lora hashes to infotext": "添加 Lora 的哈希值文本到图片信息中",
|
||
"Add Lora to prompt": "將 LoRA 添加到提示詞",
|
||
"Add LyCORIS to prompt": "将 LyCORIS 添加到提示词",
|
||
"Add mask by sketch": "根据草图添加蒙版",
|
||
"Add merge recipe metadata": "添加融合配方信息",
|
||
"Add model hash to generation information": "將模型的雜湊值加入到生成資訊",
|
||
"Add model hash to infotext": "添加模型哈希值到生成信息",
|
||
"Add model name to generation information": "將模型名稱加入到生成資訊",
|
||
"Add model name to infotext": "添加模型名到生成信息",
|
||
"AddNet Model 1": "[附加網絡] 模型 1️⃣",
|
||
"AddNet Model 2": "[附加網路] 模型 2️⃣",
|
||
"AddNet Model 3": "[附加網路] 模型 3️⃣",
|
||
"AddNet Model 4": "[附加網路] 模型 4️⃣",
|
||
"AddNet Model 5": "[附加網路] 模型 5️⃣",
|
||
"AddNet TEnc Weight 1": "[附加網路] 文字編碼器權重 1️⃣",
|
||
"AddNet TEnc Weight 2": "[附加網路] 文字編碼器權重 2️⃣",
|
||
"AddNet TEnc Weight 3": "[附加網路] 文字編碼器權重 3️⃣",
|
||
"AddNet TEnc Weight 4": "[附加網路] 文字編碼器權重 4️⃣",
|
||
"AddNet TEnc Weight 5": "[附加網路] 文字編碼器權重 5️⃣",
|
||
"AddNet UNet Weight 1": "[附加網路] UNet 權重 1️⃣",
|
||
"AddNet UNet Weight 2": "[附加網路] UNet 權重 2️⃣",
|
||
"AddNet UNet Weight 3": "[附加網路] UNet 權重 3️⃣",
|
||
"AddNet UNet Weight 4": "[附加網路] UNet 權重 4️⃣",
|
||
"AddNet UNet Weight 5": "[附加網路] UNet 權重 5️⃣",
|
||
"AddNet Weight 1": "[附加網路] 權重 1️⃣",
|
||
"AddNet Weight 2": "[附加網路] 權重 2️⃣",
|
||
"AddNet Weight 3": "[附加網路] 權重 3️⃣",
|
||
"AddNet Weight 4": "[附加網路] 權重 4️⃣",
|
||
"AddNet Weight 5": "[附加網路] 權重 5️⃣",
|
||
"Add network to prompt": "将 Lora 等模型添加到提示词",
|
||
"Add network to prompt: refresh": "将 Lora 等模型添加到提示词: 刷新",
|
||
"Add new prompts": "添加新提示词",
|
||
"Add N to seed when repeating": "重复时在种子数上加 N",
|
||
"Add number suffix": "添加数字后缀",
|
||
"Add number to filename when saving": "儲存的時候在檔案名里加入數字",
|
||
"add_preview_prompt_button": "添加预览提示词按钮",
|
||
"Add program version to generation information": "将项目版本添加到生成信息",
|
||
"Add program version to infotext": "添加项目版本到生成信息",
|
||
"add prompt by image": "按图像信息添加提示词",
|
||
"Add/Remove...": "添加/删除...",
|
||
"Address": "地址",
|
||
"Address of the ComfyUI server as seen from the webui. Only used by the extension to load the ComfyUI iframe (requires reload UI)": "ComfyUI 前端服务器访问地址，仅用于嵌套 ComfyUI 网页框架 (需要重载 UI)",
|
||
"Add Reverse Frame": "添加反转帧",
|
||
"Adds customizable dynamic thresholding to allow high CFG Scale values without the burning / 'pop art' effect.": "加入可自訂的動態閾值，以允許高 CFG Scale 值，而不會有燒焦或「流行藝術」效果。",
|
||
"Add selection [Enter]": "添加选择 [输入]",
|
||
"Add Smart-Steps minimum step and ToMe merging ratio value to generation information.": "将优化迭代步数和TOME合并比率数值信息添加到图像生成信息中",
|
||
"Add soundtrack": "添加音轨",
|
||
"'add_soundtrack' and 'soundtrack_path' aren't being honoured in \"Interpolate an existing video\" mode. Original vid audio will be used instead with the same slow-mo rules above.": "‘添加音频’和‘音频路径’将不会在‘插入现有视频’模式中执行，原有视频的音频将会使用相同的慢动作规则设置",
|
||
"Add Textual Inversion hashes to infotext": "将 Textual Inversion 哈希值添加到生成信息",
|
||
"Add to / replace in saved directories": "加入至或取代已儲存的目錄",
|
||
"Add to Sequence X": "添加到 X 轴",
|
||
"Add to Sequence Y": "添加到 Y 轴",
|
||
"add_trigger_words_button": "添加触发词按钮",
|
||
"Add trigger words to prompt": "一键添加本模型的触发词到提示词输入框",
|
||
"Add user name to generation information when authenticated": "将已认证的用户名添加到生成信息",
|
||
"Add user name to infotext when authenticated": "添加已认证的用户名到生成信息",
|
||
"Add VAE hash to infotext": "添加 VAE 哈希值到生成信息",
|
||
"Add VAE name to infotext": "添加 VAE 名称到生成信息",
|
||
"Add Vectorscope CC parameters to generation information": "向生成信息中添加 Vectorscope CC 参数",
|
||
"Add weights to Sequence X": "将权重添加到 X 序列中",
|
||
"ADetailer CFG scale": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 10th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 2nd": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 3rd": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 4th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 5th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 6th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 7th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 8th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 9th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer checkpoint": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 10th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 2nd": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 3rd": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 4th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 5th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 6th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 7th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 8th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 9th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer CLIP skip": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 10th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 2nd": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 3rd": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 4th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 5th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 6th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 7th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 8th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 9th": "After Detailer CLIP 终止层数",
|
||
"ADetailer confidence threshold %": "置信阈值 (单位: %)",
|
||
"ADetailer denoising strength": "重绘幅度",
|
||
"ADetailer erosion (-) / dilation (+)": "图像腐蚀 (-) / 图像膨胀 (+)",
|
||
"ADetailer mask blur": "重绘蒙版边缘模糊度",
|
||
"ADetailer model": "After Detailer 模型",
|
||
"ADetailer model 10th": "After Detailer 模型",
|
||
"ADetailer model 2nd": "After Detailer 模型",
|
||
"ADetailer model 3rd": "After Detailer 模型",
|
||
"ADetailer model 4th": "After Detailer 模型",
|
||
"ADetailer model 5th": "After Detailer 模型",
|
||
"ADetailer model 6th": "After Detailer 模型",
|
||
"ADetailer model 7th": "After Detailer 模型",
|
||
"ADetailer model 8th": "After Detailer 模型",
|
||
"ADetailer model 9th": "After Detailer 模型",
|
||
"ADetailer negative prompt": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 10th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 2nd": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 2nd\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 3rd": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 3rd\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 4th": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 4th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 5th": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 5th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 6th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 7th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 8th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 9th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer prompt": "After Detailer 正向提示词",
|
||
"ADetailer prompt 10th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 2nd": "After Detailer 正向提示词",
|
||
"ADetailer prompt 2nd\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 3rd": "After Detailer 正向提示词",
|
||
"ADetailer prompt 3rd\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 4th": "After Detailer 正向提示词",
|
||
"ADetailer prompt 4th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 5th": "After Detailer 正向提示词",
|
||
"ADetailer prompt 5th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 6th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 7th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 8th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 9th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer sampler": "After Detailer 采样方法",
|
||
"ADetailer sampler 10th": "After Detailer 采样方法",
|
||
"ADetailer sampler 2nd": "After Detailer 采样方法",
|
||
"ADetailer sampler 3rd": "After Detailer 采样方法",
|
||
"ADetailer sampler 4th": "After Detailer 采样方法",
|
||
"ADetailer sampler 5th": "After Detailer 采样方法",
|
||
"ADetailer sampler 6th": "After Detailer 采样方法",
|
||
"ADetailer sampler 7th": "After Detailer 采样方法",
|
||
"ADetailer sampler 8th": "After Detailer 采样方法",
|
||
"ADetailer sampler 9th": "After Detailer 采样方法",
|
||
"ADetailer steps": "After Detailer 迭代步数",
|
||
"ADetailer steps 10th": "After Detailer 迭代步数",
|
||
"ADetailer steps 2nd": "After Detailer 迭代步数",
|
||
"ADetailer steps 3rd": "After Detailer 迭代步数",
|
||
"ADetailer steps 4th": "After Detailer 迭代步数",
|
||
"ADetailer steps 5th": "After Detailer 迭代步数",
|
||
"ADetailer steps 6th": "After Detailer 迭代步数",
|
||
"ADetailer steps 7th": "After Detailer 迭代步数",
|
||
"ADetailer steps 8th": "After Detailer 迭代步数",
|
||
"ADetailer steps 9th": "After Detailer 迭代步数",
|
||
"ADetailer VAE": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 10th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 2nd": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 3rd": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 4th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 5th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 6th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 7th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 8th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 9th": "After Detailer 使用的 VAE",
|
||
"ADetailer x(→) offset": "X轴 (→) 偏移",
|
||
"ADetailer y(↑) offset": "Y轴 (↑) 偏移",
|
||
"A directory on the same machine where the server is running.": "伺服器主機上某一目錄",
|
||
"A directory or a file": "一个文件或文件夹",
|
||
"- Adjust brush size": " - 調整筆刷大小",
|
||
"Adjust brush size": "调整画笔大小",
|
||
"adjust denoise each img2img batch": "调整每个图生图批次的重绘幅度",
|
||
"Adjust settings": "调节设置",
|
||
"adjusts the aspect ratio for the depth calculation (normally 1)": "调节深度计算的纵横比 (通常为 1)",
|
||
"adjusts the aspect ratio for the depth calculations": "调整深度计算的纵横比",
|
||
"Adjusts the generated prompt. You will need to experiment with this setting.": "調整已產生的提示詞，使用時要嘗試調整此設定",
|
||
"adjusts the overall contrast per frame [default neutral at 1.0]": "调整每帧图像的整体对比度 [默认值为1.0]",
|
||
"adjusts the overall contrast per frame [neutral at 1.0, recommended to *not* play with this param]": "调整每帧图像的整体对比度 [默认值为1.0，*不* 推荐使用此参数]",
|
||
"adjusts the scale at which the canvas is moved in 3D by the translation_z value. [maximum range -180 to +180, with 0 being undefined. Values closer to 180 will make the image have less depth, while values closer to 0 will allow more depth]": "通过平移 Z 调整画布在三维空间中移动的比例 [最大范围 -180 至 +180 ，0 值未定义。接近 180 会降低图像的纵深感，而接近 0 会增加］",
|
||
"Adjusts the size of the image by multiplying the original width and height by the selected value. Ignored if either Resize width to or Resize height to are non-zero.": "通過乘以選定值來調整圖像的大小。如果「將寬度調整至」或「將高度調整至」不為零，則會忽略。",
|
||
"Adjust strength": "调整强度",
|
||
"adjust the brightness of the mask. Should be a positive number, with 1.0 meaning no adjustment.": "调整蒙版的亮度。该值应该为正数，1.0 表示无调整",
|
||
"Adjust tilt for detected faces": "调节俯仰以便检测面部",
|
||
"Admirable": "极好的",
|
||
"ads": "含廣告",
|
||
"Advanced": "進階的",
|
||
"Advanced editing": "进阶编辑",
|
||
"Advanced options": "進階選項",
|
||
"Advanced Options": "高级选项",
|
||
"Advanced Settings": "高级设置",
|
||
"Advertising": "Advertising (广告)",
|
||
"Aesthetic Image Scorer": "美學圖像評分器",
|
||
"aesthetic_score": "美學分數",
|
||
"Affected areas": "匹配区域",
|
||
"Affects optical flow hybrid motion. 1 is normal flow. -1 is negative flow. 0.5 is half flow, etc...": "影响光流合成运动。1为正常流量；-1为负流量；0.5为半流量，以此类推...",
|
||
"Affine": "仿射",
|
||
"A file on the same machine where the server is running.": "服务器所在主机上的文件",
|
||
"After": "之后",
|
||
"After Generation": "完成生成后",
|
||
"After recompiling, later inferences will reuse the newly compiled model and achieve faster running times.": "重新编译后，后续推理将重新用新编译的模型并实现更短的运行时间",
|
||
"A generic prompt used to generate a sample image to verify model fidelity.": "用於產生樣本圖像以驗證模型保真度的通用提示。",
|
||
"Aggressive": "激进",
|
||
"A higher temperature will produce more diverse results, but with a higher risk of less coherent text": "较高的 Temperature 值会产生更加多样化的结果，但输出文本不连贯的风险也较高",
|
||
"A integrated translator for translating prompts to English using Deepl or Baidu.": "一個使用 Deepl 或 Baidu 翻譯提示至英文的統整翻譯器。",
|
||
"Alias from file": "从文件读取别名",
|
||
"Alien": "Alien (异形)",
|
||
"all": "全部",
|
||
"All": "所有",
|
||
"All ControlNet units for all images in a batch": "所有图像的所有 ControlNet 单元处于同一个批次",
|
||
"All Displayed Ones": "所有已显示的",
|
||
"all filters": "所有筛选项",
|
||
"all - force multiple --> idea by redditor WestWordHoeDown, it forces to choose between 2 and 3 image types": "all -- 全部 - 强制混合 --> 来自于 redditor: WestWordHoeDown 的创意，强制选择 2-3 种图像类型。",
|
||
"All models in this directory will receive the selected model's metadata": "此目錄下的所有模型將被寫入所選模型的中繼資料",
|
||
"all --> normally picks a image type as random. Can choose a ‘other’ more unique type.": "all -- 全部 --> 通常会随机选择一个图像类型。可以选择一个 \"其他\" 更独特的类型。",
|
||
"Allow All": "允许全部",
|
||
"Allow detectmap auto saving": "允許檢測圖自動儲存",
|
||
"Allow Full live preview method with lowvram/medvram": "允许在 lowvram/medvram 设置下使用完整实时预览",
|
||
"Allow http:// and https:// URLs for input images in API": "允许在 API 请求中将 http:// 与 https:// 链接作为输入图片使用",
|
||
"Allow img2img": "允许图生图",
|
||
"Allow manually uploading pnginfo from the uploaded plugin image to txt2img or img2img.": "允许从扩展中已上传的图像中手动上传 PNG 图片信息到文生图或图生图",
|
||
"Allow NSFW": "允许成人内容",
|
||
"Allow other script to control this extension": "允許其他指令碼控制此擴充功能",
|
||
"allow overwrite": "允许覆盖文件",
|
||
"Allow overwrite output-model": "允许输出时覆盖同名模型",
|
||
"Allow Painting": "允许重绘",
|
||
"Allow Post Processing": "允许后期处理",
|
||
"Allow Preview": "開啟預覽",
|
||
"Allows for random parameters during txt2img generation. This script is processed for all generations, regardless of the script selected, meaning this script will function with others as well, such as AUTOMATIC1111/stable-diffusion-webui-wildcards": "允许在文生图的生成期间使用随机的参数。无论选择哪种脚本，此脚本都会针对所有的生成进行处理，这意味着此脚本也可以与其他脚本一起使用，如通配符",
|
||
"allows keyframing different samplers. Use names as they appear in ui dropdown in 'run' tab": "允许为不同关键帧使用不一样的采样方法。使用出现在 \"运行\" 选项卡中 UI 下拉菜单中显示的名称",
|
||
"allows keyframing different sd models. use *full* name as appears in ui dropdown": "允许关键帧使用不同的 SD 模型。使用出现在 UI 中 Stable Diffusion 模型下拉选项的模型 *完整* 名称",
|
||
"allows keyframing different sd models. Use *full* name as appears in ui dropdown": "允许关键帧使用不同的 SD 模型。使用出现在 UI 中 Stable Diffusion 模型下拉选项的模型 *完整* 名称",
|
||
"allows keyframing of samplers. Use names as they appear in ui dropdown in 'run' tab": "允许为不同关键帧使用不一样的采样方法。使用出现在 \"运行\" 选项卡中 UI 下拉菜单中显示的名称",
|
||
"Allows the model to learn brightness and contrast with greater detail during training. Value controls the strength of the effect, 0 disables it.": "允许模型在训练过程中更详尽地学习亮度和对比度。本选项数值控制学习效果的强弱，0 则不生效。",
|
||
"Allows you to easily, or even completely automatically start using HTTPS.": "讓你可以很簡單的自動配置安全性傳輸協定（https）",
|
||
"Allow TF16 reduced precision math ops": "允许使用 TF16 低精度算符",
|
||
"Allow Unsafe IP Address": "允许不安全的 IP 地址",
|
||
"🔄 All Reset": "🔄 全部重置",
|
||
"All string sanitization logic has been moved into the": "所有字符串清理逻辑都已移动到",
|
||
"alpha": "α",
|
||
"Alphabetical Order": "字母顺序",
|
||
"Alpha channel image": "Alpha 通道图像",
|
||
"Alpha (default is half of Net dim)": "Alpha 值 (默认为网络维度的一半)",
|
||
"Alpha matting": "Alpha 遮罩",
|
||
"alpha threshold": "透明度阈值",
|
||
"Alpha threshold": "透明度阈值",
|
||
"Also add data for WebUI metadata editor": "同步为 WebUI 元数据编辑器添加数据",
|
||
"also delete off-screen images": "允许同时删除屏幕外的图片",
|
||
"also enable wierd blocky upscale mode": "同时启用糟糕的分块放大模式",
|
||
"Also output single joined audio file (will be named <date>_joined.wav)": "同时输出一个音频文件 (将命名为 <日期>_joined.wav)",
|
||
"alternate": "交替",
|
||
"Alternate Steps": "交替疊代",
|
||
"(alternative implementation for the above; used prior to 1.6.0 for DDIM sampler; ignored if the above is set; changes seeds)": "(上述选项的另一种实现方式; 在 1.6.0 之前用于 DDIM 采样方法; 如果设置了上述选项, 则此选项将被忽略; 影响随机性)",
|
||
"(alternative implementation for the above; used prior to 1.6.0 for DDIM sampler; overrides the above if set; WARNING: truncates negative prompt if it's too long; changes seeds)": "(上述选项的另一种实现方式; 在 1.6.0 之前用于 DDIM 采样方法; 如果设置了本选项, 则覆盖上方选项; 警告: 若反向提示词太长, 会被截断; 本选项影响随机性)",
|
||
"Alternatively, if one wants to keep faraway details, one may instead make them smaller and closer than they physically would be (in order to fit nicely into the limited depth space).": "或者，如果想保留远处的细节，可以让它们比实际上更小、更近，以便很好地适应有限的深度空间。",
|
||
"Alternatively, use": "或者，您也可以使用",
|
||
"Alternatively, you can enable": "或者，您可以启用",
|
||
"Alt+left/right moves prompt elements": "使用 Alt+ ←/→ 移动提示词内容",
|
||
"Alt + wheel": "Alt + 滾輪",
|
||
"Always": "保持",
|
||
"Always append space if inserting at the end of the textbox": "如果在文本输入框的末尾插入，总是附加空格",
|
||
"Always bodysnatch responsibly.": "始终以负责任的态度使用 bodysnatch。",
|
||
"Always discard next-to-last sigma": "始終丟棄倒數第二個 sigma",
|
||
"Always Display Buttons": "总是显示按钮",
|
||
"Always Display Buttons on model cards": "模型卡片保持显示按钮",
|
||
"Always fully": "补全完整嵌套",
|
||
"Always print all generation info to standard output": "始終將所有產生資訊輸出到 standard output （一般為控制台）",
|
||
"Always save all generated image grids": "始終儲存所有產生的宮格圖",
|
||
"Always save all generated images": "始終儲存所有產生的圖像",
|
||
"Always show all networks on the Lora page": "在 Lora 页面保持显示所有模型",
|
||
"A merger of the two checkpoints will be generated in your": "合并后的模型将保存在您的",
|
||
"American Impressionism": "美国印象派",
|
||
"(amount of additional noise to counteract loss of detail during sampling)": "(用于抵消采样过程中丢失细节的额外噪声量)",
|
||
"(amount of additional noise to counteract loss of detail during sampling; only applies to Euler, Heun, and DPM2)": "(用于抵消采样过程中丢失细节的额外噪声量; 仅作用于 Euler, Heun, 和 DPM2 采样方法)",
|
||
"amount of graininess to add per frame for diffusion diversity": "每帧增加的颗粒度数量，用于扩散多样性",
|
||
"Amount of images to generate": "图像生成数量",
|
||
"amount of presence of previous frame to influence next frame, also controls steps in the following formula [steps - (strength_schedule * steps)]": "前一帧影响下一帧的存在量，也控制下式中的步数：[steps - (strength_schedule * steps)]",
|
||
"(amount of stochasticity; only applies to Euler, Heun, and DPM2)": "(随机流失率大小; 仅作用于 Euler, Heun, 和 DPM2 采样方法)",
|
||
"Amount of time to pause between Epochs (s)": "每訓練週期之間暫停的時間（秒）",
|
||
"Amount of tries": "尝试次数",
|
||
"Amount schedule": "强度计划",
|
||
"Amount times to repeat upscaling with IMG2IMG (loopback)": "通过图生图放大的重复次数 (回送)",
|
||
"Amplification of distortion of circles": "圆形变形的放大倍数",
|
||
"Amplifies the contrast that may be lost in partially masked regions.": "增强在部分蒙版区域中可能减弱的对比度。",
|
||
"Analog Film": "Analog Film (胶片)",
|
||
"Analyse": "分析",
|
||
"Analyse Face": "分析面部",
|
||
"Analysis": "分析",
|
||
"Analysis Mode": "分析模式",
|
||
"Analyze": "分析",
|
||
"Analyzes video frames for camera motion and applies movement to render.": "分析视频帧中的镜头运动, 并将运动应用于渲染",
|
||
"(an be any valid CSS value)": "(可为任意有效 CSS 值)",
|
||
"Ancestral ETA Schedule": "Ancestral ETA 调度计划",
|
||
"and": "与",
|
||
"AND": "与",
|
||
"and drop a star if you like it!": ", 如果喜欢本插件的话还请点个 Star !",
|
||
"and generate images according to random segmentation which preserve image layout.": " 来根据保存图像的布局随机分割生成图像。",
|
||
"and report your problem.": "反馈遇到的问题",
|
||
"and restart webui, and enjoy the joy of creation!": "并重启 webui，享受创作的乐趣！",
|
||
", and the underlying": "，底层 ",
|
||
"and upscale to the size of the original video.": "放大图片到原始视频的尺寸。",
|
||
"A negative prompt for the generic sample image.": "通用圖像的反向提示詞。",
|
||
"A negative prompt to use when generating class images. Can be empty.": "生成类别图像时使用的反向提示词。可留空。",
|
||
"A negative prompt to use when generating preview images.": "用于生成预览图像的反向提示词。",
|
||
"Angle": "角度",
|
||
"angular": "angular (棱角)",
|
||
"An hour ago, I released Unprompted v2.0.0, which is my largest update since launch. It introduces a streamlined form of \"advanced expressions\" that, in my view, brings Unprompted up to the level of a real, honest-to-goodness templating language.": "一个小时前，我推出了 Unprompted v2.0.0，这是自从发布以来最大的一次更新，引入了一种更为精简的“高级表达式”，在我看来，这让 Unprompted 达到了一个真正的、名副其实的模板语言的水平。",
|
||
"animal": "animal (动物)",
|
||
"animal - A random (fictional) animal. Has a chance to have human characteristics, such as clothing added.": "animal - 动物 - 一只随机的（虚构的）动物。可能会拥有人类的特征，如穿衣服。",
|
||
"animal_openpose": "animal_openpose (OpenPose 姿态 - 动物)",
|
||
"animation": "動畫",
|
||
"Animation mode": "動畫模式",
|
||
"anime": "anime (动漫)",
|
||
"Anime": "Anime (动漫)",
|
||
"Anime-inclined great guide (by FizzleDorf) with lots of examples:": "充滿動漫風格的詳細指南（由 FizzleDorf 製作），內含許多範例：",
|
||
"anime key visual": "anime key visual (动漫主视觉图/海报)",
|
||
"Anime Remove Background": "动漫移除背景模式",
|
||
"Anime Style (Up Detection, Down mask Quality)": "动漫风格模式 (提高识别能力, 降低蒙版质量)",
|
||
"Annotator resolution": "预处理器分辨率",
|
||
"📣 Announcements": "📣 公告",
|
||
"Answer": "响应",
|
||
"Anti Blur": "模糊抑制",
|
||
"API endpoint": "API 端点",
|
||
"API Endpoint": "API 端点",
|
||
"API info may not be necessary for some boorus, but certain information or posts may fail to load without it. For example, Danbooru doesn't show certain posts in search results unless you auth as a Gold tier member.": "API 信息对于某些 booru 站点可能不是必需的，但如果没有它，某些信息或图帖可能无法加载。 例如，除非你的 API 验证属于黄金会员，否则 Danbooru 可能不会在搜索结果中显示某些图帖。",
|
||
"API key": "API Key",
|
||
"API Key": "API 金鑰",
|
||
"API key for authenticating with Civitai. This is required to download some models. See Wiki for more details.": "用于通过 Civitai 进行身份验证的 API 密钥。下载部分模型时需要。更多详细信息请查阅 Wiki",
|
||
"API Keys": "API 密钥",
|
||
"append": "放後面",
|
||
"Append": "追加至末尾",
|
||
"Append Artist tags from CLIP": "使用来自 CLIP 的艺术家标签",
|
||
"Append Caption to File Name": "将描述文本追加到文件名之后",
|
||
"Append comma on tag autocompletion": "自動完成標記時加入逗號",
|
||
"Append commas": "追加逗号",
|
||
"Append DeepDanbooru to Caption": "把 DeepDanbooru 的结果追加到已有的描述文本之后",
|
||
"Append Flavor tags from CLIP": "使用来自 CLIP 的风格标签",
|
||
"Append Hires prompts to the end of the original prompts instead of replacing it.": "将高分辨率修复提示词追加到原始提示词的末尾，而不是替换它们",
|
||
"Append interrogated prompt at each iteration": "在每次疊代中附加詢問提示。",
|
||
"Append Medium tags from CLIP": "使用来自 CLIP 的介质标签",
|
||
"Append png info to prompts": "將提示詞添加到 PNG 資訊內",
|
||
"Append prompts, not replace": "追加提示词 (非替换)",
|
||
"Append space on tag autocompletion": "标签补全后自动添加空格",
|
||
"Apply": "套用",
|
||
"Apply all selected styles from the style selction dropdown in main UI to the prompt.": "从主界面的预设样式选择下拉菜单中将所有选定的预设样式应用到提示词。",
|
||
"Apply all selected styles to prompts.": "将所有当前选择的预设样式添加到提示词中",
|
||
"Apply and quit": "应用更改并退出",
|
||
"Apply and restart UI": "更新並重新啟動使用者介面",
|
||
"Apply block weight from text": "从文本框应用分块权重值",
|
||
"Apply button loads settings\nWrite custom name to enable save\nDelete automatically will save to file": "应用加载按钮以加载预设\n输入自定义名称来启用保存功能\n保存到文件时会自动删除",
|
||
"Apply changes & restart server": "应用更改并重启",
|
||
"Apply changes to ALL displayed images": "将更改应用于所有已显示的图像",
|
||
"Apply changes to filtered images": "应用更改至过滤后的图片",
|
||
"Apply changes to selected image": "将更改应用于所选图像",
|
||
"Apply color correction to img2img results to match original colors": "对图生图结果应用颜色校正以匹配原始颜色",
|
||
"Apply color correction to img2img results to match original colors.": "對圖生圖結果套用顏色校正以匹配原始顏色",
|
||
"apply colormatch before adding noise (use with CN's Tile)": "在添加噪声前应用颜色匹配 (和 ControlNet 的 Tile 模型一起使用)",
|
||
"Apply data": "应用数据",
|
||
"Apply horizontal Flip": "应用水平翻转",
|
||
"Apply Horizontal Flip": "套用水平翻轉",
|
||
"Apply if any": "应用 (如有)",
|
||
"Apply if any: remove style text from prompt; if any styles are found in prompt, put them into styles dropdown, otherwise keep it as it is.": "应用 (如有): 从提示词中删除对应预设样式文本; 将匹配到的预设样式加入下拉菜单",
|
||
"Apply inside mask only": "仅使用内部蒙版",
|
||
"Apply LoRA checkpoint to TensorRT model": "将 LoRA 应用到 TensorRT 模型",
|
||
"Apply mask to original image": "应用蒙版到原始图",
|
||
"Apply mask to the Ref Image": "应用蒙版到参考图",
|
||
"Apply mask to the result": "应用蒙版到结果",
|
||
"Apply only selected scripts to ADetailer": "只将选定的脚本应用于 After Detailer",
|
||
"Apply Presets": "应用预设",
|
||
"Apply (Reload UI)": "应用 (重载 UI)",
|
||
"Apply: remove style text from prompt, always replace styles dropdown value with found styles (even if none are found).": "应用: 从提示词中删除对应预设样式文本; 总是将下拉菜单内容替换为相应预设样式名 (即使不存在对应预设)",
|
||
"Apply scripts to faces": "使用脚本识别脸部",
|
||
"Apply selected styles to current prompt": "將所選樣式套用於當前提示",
|
||
"Apply selection filter": "应用选择过滤器",
|
||
"💾 Apply settings": "💾 应用设置",
|
||
"Apply settings": "套用設定",
|
||
"Apply Settings": "保存设置",
|
||
"Apply Style": "应用样式",
|
||
"Apply to": "应用到",
|
||
"Apply transfer control when loading models": "加载模型时应用控制转移",
|
||
"app_started_callback": "应用已启动的回调",
|
||
"A prompt describing the subject. Use [Filewords] to parse image filename/.txt to insert existing prompt here.": "描述主题的提示词。使用 [Filewords] 解析图像文件名/.txt 文本文件来在此处插入现有提示词。",
|
||
"A prompt for generating classification/regularization images. See the readme for more info.": "生成分类/正则化图像用的提示词。详细信息请查阅 readme 。",
|
||
"A prompt used to generate a 'baseline' image that will be created with other samples to verify model fidelity.": "用于生成基准图像的提示词。会和其他样本一同生成来检验模型的忠诚度。",
|
||
"a random seed will be used on each frame of the animation": "种子会随机生成并被应用于动画中的每一帧",
|
||
"A range can be provided:": "項數可以有範圍",
|
||
"Architectural": "Architectural (建筑)",
|
||
"architecture": null,
|
||
"Architecture": "架构",
|
||
"Archive filename pattern": "压缩包文件名格式",
|
||
"Area": "区域",
|
||
"Area (large to small)": "面积 (从大到小)",
|
||
"Area lower bound": "面積下限",
|
||
"Area upper bound": "面積上限",
|
||
"Arguments are case-sensitive.": "参数区分大小写。",
|
||
"Arm Length": "手臂长度",
|
||
"art deco": "art deco (装饰艺术)",
|
||
"Artistic": "艺术",
|
||
"Artists have a major impact on the result. Automatically, it will select between 0-3 artists out of 3483 artists for your prompt.": "Artists (艺术家风格) 对图像结果有很大影响。它会自动从 3483 名艺术家中选择 0-3 名艺术家名作为你提示词的一部分。",
|
||
"art nouveau": "art nouveau (新艺术运动)",
|
||
"Arxiv": "预印本 (Arxiv)",
|
||
"as a UI to define your animation schedules (see the Parseq section in the Init tab).": " 作为定义动画参数表的UI (请参见初始化选项卡中的参数定序器部分) .",
|
||
"Ascending": "升序",
|
||
"A setting of 1 will cause every frame to receive diffusion in the sequence of image outputs. A setting of 2 will only diffuse on every other frame, yet motion will still be in effect. The output of images during the cadence sequence will be automatically blended, additively and saved to the specified drive. This may improve the illusion of coherence in some workflows as the content and context of an image will not change or diffuse during frames that were skipped. Higher values of 4-8 cadence will skip over a larger amount of frames and only diffuse the “Nth” frame as set by the diffusion_cadence value. This may produce more continuity in an animation, at the cost of little opportunity to add more diffused content. In extreme examples, motion within a frame will fail to produce diverse prompt context, and the space will be filled with lines or approximations of content - resulting in unexpected animation patterns and artifacts. Video Input & Interpolation modes are not affected by diffusion_cadence.": "设置为 1 将使每个帧在图像输出序列中生成图像。设置为 2 将每隔一帧进行图像生成，但运动仍然有效。间隔序列期间的图像输出将自动混合、添加并保存到指定驱动器。这可能会改善某些工作流中的一致性错觉，因为图像的内容和上下文在跳过的帧期间不会改变或扩散。更高的间隔值，例如4-8，将跳过更多的帧，并仅生成由生成间隔值设置的“第N”帧。这可能会在动画中产生更多的连续性，但几乎没有机会添加更多的扩散内容。在极端的例子中，帧内的运动将无法产生不同的提示上下文，并且空间将充满线条或近似的内容，从而导致意外的动画模式和伪影。视频输入和插值模式不受生成间隔值的影响。",
|
||
"Aspect Ratio Helper": "長寬比小幫手",
|
||
"Aspect Ratio schedule": "纵横比调度计划",
|
||
"Aspect Ratios Dropdown": "下拉式纵横比菜单",
|
||
"Attempt to automatically set training parameters based on total VRAM. Still under development.": "尝试根据总显存自动设置训练参数。仍在开发中。",
|
||
"Attention grabber": "隨機關鍵詞吸引註意力",
|
||
"Attention Heatmap": "注意力熱度圖",
|
||
"Attention texts for visualization. (comma separated)": "視覺化的注意文字（以逗號分隔）",
|
||
"Audio (if provided) will *not* be transferred to the interpolated video if Slow-Mo is enabled.": "音频 (如果提供了) 在以下选项启用时将不会转码压制进帧插值后的视频内：慢动作",
|
||
"Audio Player 0": "音频播放器 0",
|
||
"Audio Player 1": "音频播放器 1",
|
||
"Audio Player 2": "音频播放器 2",
|
||
"Audio Player 3": "音频播放器 3",
|
||
"Audio Player 4": "音频播放器 4",
|
||
"Audio Player 5": "音频播放器 5",
|
||
"Audio Player 6": "音频播放器 6",
|
||
"Audio Player 7": "音频播放器 7",
|
||
"Author": "作者",
|
||
"Author of this model": "此模型的作者",
|
||
"auto": "自动",
|
||
"Auto": "自動",
|
||
"AUTO": "自动",
|
||
"autocast": "自动转换",
|
||
"Autocomplete options": "自动补全选项",
|
||
"Autocontrast low/high cutoff schedules 0-100. Low 0 High 100 is full range.": "自动对比度低/高隔离调度从 0 到 100。最低值 0 到最高值 100 是整体范围",
|
||
"Auto-contrasts the mask for the composite. If enabled, uses the low/high autocontrast cutoff schedules.": "对蒙版进行自动对比度处理后进行合成。如启用，则使用低/高自动对比度隔离调度计划。",
|
||
"auto-delete imgs when video is ready": "视频完成时自动删除图片",
|
||
"auto-delete imgs when video is ready. Will break Resume from timestring!": "在视频完成后自动删除图像。会导致恢复制作动画过程选项失效!",
|
||
"auto-delete inputframes (incl CN ones) when video is ready": "当视频完成时自动删除输入帧 (包括 ControlNet 选项卡中的)",
|
||
"Autodetect": "自动检测",
|
||
"Auto detect size from img2img": "从图生图自动检测图像尺寸",
|
||
"Auto det_size : Will load model twice and test faces on each if needed (old behaviour). Takes more VRAM. Precedence over fixed det_size": "自动 det_size : 如有需要可启用，将加载模型两次以在每个模型上测试面部 (旧版行为)。会占用更多显存。优先于固定 det_size",
|
||
"Auto enable when loading the PNG Info of a generation that used FreeU": "在识别 PNG 图片信息时加载到使用过 FreeU 的图像后自动启用 FreeU",
|
||
"Auto face size adjustment by model": "通过模型自动调整脸部大小",
|
||
"Auto focal point crop": "自動焦點裁切",
|
||
"Auto load and save JSON database": "自动加载并保存 JSON 数据库",
|
||
"automatic": "自动",
|
||
"Automatic": "自动",
|
||
"Automatically convert VAE to bfloat16": "自动转换 VAE 为 bfloat16",
|
||
"(automatically enable options for backwards compatibility when importing generation parameters from infotext that has program version.)": "(导入生成参数时根据其项目程序版本信息自动启用选项以向后兼容)",
|
||
"Automatically expands an image that does not fit completely in the canvas area, similar to manually pressing the S and R buttons": "自动展开不完全匹配画布区域的图像, 相当于手动按下 S 和 R 按钮",
|
||
"Automatically open webui in browser on startup": "启动后自动在浏览器打开 webui 界面",
|
||
"Automatically purge wildcard cache on every generation.": "每次生成时自动清理通配符缓存",
|
||
"Automatically revert VAE to 32-bit floats": "自动恢复 VAE 为 float32",
|
||
"Automatically set the Scale by factor based on the name of the selected Upscaler.": "根据所选放大模型的名称自动设置放大倍数",
|
||
"Automatically unpack .zip after downloading": "下载完成后自动解压 .zip 文件",
|
||
"Automatically unpack .zip files after downloading": "完成下载后自动解压 .zip 文件",
|
||
"Automatically update your prompt with interesting modifiers. (Runs slowly the first time)": "使用有趣的修飾符自動更新你的提示詞。（第一次運行會比較慢）",
|
||
"Automatic backward compatibility": "自动向后兼容",
|
||
"“automatic” is entirely build around Latent Couple. It will pass artists and the amount of people/animals/objects to generate in the prompt automatically. Set the prompt compounder equal to the amount of areas defined in Laten Couple.": "\"自动\" 是完全围绕 Latent Couple 构建的。它将在提示词中自动传递艺术家和要生成的人/动物/物件的数量。将提示词混合值设置为等于 Latent Couple 中定义的分区数量。",
|
||
"Automaticlly revert VAE to 32-bit floats": "自动恢复 VAE 为 float32",
|
||
"Auto SAM": "自动 SAM",
|
||
"Auto SAM Config": "自动 SAM 配置",
|
||
"Auto SAM is mainly for semantic segmentation and image layout generation, which is supported based on ControlNet. You must have ControlNet extension installed, and you should not change its directory name (sd-webui-controlnet).": "自动 SAM 基于 ControlNet 的支持，主要用于语义分割和图像分层。需安装 ControlNet 扩展，且不能修改其目录名 (sd-webui-controlnet)。",
|
||
"Auto save merged model": "自动保存合并后模型",
|
||
"Auto search port": "自动检索端口",
|
||
"Auto segmentation output": "自动语义分割输出",
|
||
"Auto-sized crop": "自動選擇大小的剪裁",
|
||
"Auto Tagging": "自动标记",
|
||
"Auto Tagging option": "自动标记选项",
|
||
"Available": "可用",
|
||
"Available LORA": "可用的 LORA 模型",
|
||
"Available LORAs": "可用的 LORA 模型",
|
||
"Available LyCORIS": "可用的 LyCORIS 模型",
|
||
"Available TensorRT Engine Profiles": "可用的 TensorRT 引擎配置",
|
||
"A value that determines the output of random number generator - if you create an image with same parameters and seed as another image, you'll get the same result": "一個固定隨機數生成器輸出的值 — 以相同參數和隨機種子生成的圖像會得到相同的結果\n🎲 將隨機種子設定為負數（預設-1），則每次都會使用一個非負數的隨機整數\n♻️ 重用上一次使用的隨機種子，如果想要固定輸出結果的話這很有用",
|
||
"A weighted sum will be used for interpolation. Requires two models; A and B. The result is calculated as A * (1 - M) + B * M": "插值將使用加權和。需要兩個模型；A和B。結果為A *（1-M）+ B * M計算。",
|
||
"Axis": "轴",
|
||
"a-z": "字母順序：從a到z",
|
||
"Backend": "后端",
|
||
"- Background": "- 背景",
|
||
"Background": "背景",
|
||
"background color": "背景顏色",
|
||
"Background Color": "背景顏色",
|
||
"Background color for image grids": "网格图背景颜色",
|
||
"Background gradiant color": "背景渐变色",
|
||
"Background source(mp4 or directory containing images)": "背景源（mp4 或包含图像的目录）",
|
||
"Background type": "背景类型",
|
||
"Back in the main UI, select the TRT model from the sd_unet dropdown menu at the top of the page.": "回到主界面，从界面顶部的 SD Unet 下拉菜单选择 TRT 模型。",
|
||
"Back to top": "返回顶部",
|
||
"Backup original text file (original file will be renamed like filename.000, .001, .002, ...)": "备份原本 txt 文件 (原文件会被重命名，类似于：.000, .001, .002, ...)",
|
||
"Backup/Restore": "备份/恢复",
|
||
"Bake in VAE": "嵌入VAE",
|
||
"Bake in VAE: refresh": "嵌入 VAE 模型: 刷新",
|
||
"Balance between eyes": "双眼间距平衡",
|
||
"Balanced": "平衡",
|
||
"baroque": "baroque (巴洛克)",
|
||
"base": "base (基础)",
|
||
"Base": "基层",
|
||
"Base alpha": "α 基数",
|
||
"Base Depth": "基础深度",
|
||
"Base model": "基础模型",
|
||
"Base model:": "底模: ",
|
||
"Base Model:": "底模: ",
|
||
"Base Model used for Add-Difference mode": "用于差额叠加模式的底模",
|
||
"Base on Stable Diffusion V2": "基于 Stable Diffusion v2 模型",
|
||
"Base Ratio": "基础比率",
|
||
"Base Sampler": "基础采样方法",
|
||
"Basic": "基本設定",
|
||
"Basic info": "基本信息",
|
||
"⚙️ Basic Settings": "⚙️ 基础设置",
|
||
"Basis": "基准",
|
||
"Batch": "批次",
|
||
"Batch cond/uncond": "批量应用正向/反向调整",
|
||
"Batch count": "產生批次",
|
||
"Batch Edit Captions": "批量编辑描述",
|
||
"Batch from Dir": "批量处理文件夹",
|
||
"Batch from directory": "批量处理文件夹",
|
||
"Batch from Directory": "從目錄進行批量處理",
|
||
"Batch Images": "批处理图像",
|
||
"Batch img2img": "批量图生图",
|
||
"Batch import prompts": "批量导入提示词",
|
||
"Batching": "批次",
|
||
"[Batch Loopback] Automatically send generated images to this ControlNet unit in batch generation": "[批量回送] 在批量生成中自动将生成后的图像发送到此 ControlNet 单元",
|
||
"Batch Mode, Resume and more": "批处理模式，恢复和更多",
|
||
"Batch Mode/ run from setting files": "批处理模式 / 从设置文件中加载",
|
||
"Batch name": "批次名稱",
|
||
"Batch Option": "批量选项",
|
||
"Batch Options": "批量选项",
|
||
"batch process": "批量处理",
|
||
"Batch process": "批量处理",
|
||
"Batch Process": "批次處理",
|
||
"Batch process images. Will apply enhancement in the tools enhancement tab.": "批量处理图像。会应用在 “工具 --> 增强” 标签页中的增强功能",
|
||
"Batch Run": "批量处理",
|
||
"Batch Settings": "批量处理设置",
|
||
"batch size": "单批数量",
|
||
"Batch size": "每批數量",
|
||
"Batch Size": "每批數量",
|
||
"batch size for large queries": "巨量查询的批次数量",
|
||
"batch size in generation": "生成的单批数量",
|
||
"batch size, restore face, hires fix settigns must be set here": "单批数量, 面部修复, 高分辨率修复等功能需要在本页面设置",
|
||
"Batch Size to Simulate": "模擬的批量大小",
|
||
"Batch Sources Images": "批量图像源",
|
||
"Batch-Warp": "批量修复",
|
||
"bauhaus": "bauhaus (包豪斯)",
|
||
"Beam Search": "Beam Search (集束检索)",
|
||
"Before": "之前",
|
||
"Before Motion": "镜头运动前",
|
||
"Before sending image, ensure img2img Inpaint tab is selected.": "发送图片前，请确保图生图选项卡在局部重绘模式。",
|
||
"Beginners guide": "新手指南",
|
||
"Begin train": "开始训练",
|
||
"behind": "有可用更新",
|
||
"behind HEAD": "落后于 HEAD",
|
||
"Below": "下方",
|
||
"Below here, you can generate a set of random prompts, and send them to the Workflow prompt field. The generation of the prompt uses the settings in the Main tab.": "在下方可以生成一组随机的提示词，并将它们发送到工作流提示词段。提示词的生成使用主菜单中的选项设置。",
|
||
"Benchmark": "基准测试",
|
||
"Benchmark Data": "基准测试数据",
|
||
"Benchmark level": "基准测试水平",
|
||
"Benchmarks...": "基准测试...",
|
||
"best": "最佳",
|
||
"best practice page": "最佳做法页面",
|
||
"Be sure to check the 'Write prompts to file' checkbox if you don't want to lose the generated prompts. Note, one image is still generated.": "不想失去產生的提示詞的話，需確保勾選 「將提示詞寫入檔案」。注意，依然會生成一張圖像。",
|
||
"beta": "β",
|
||
"Better": "更好的",
|
||
"Bicubic": "双三次",
|
||
"Bilinear": "双线性",
|
||
"Bilingual Localization": "雙語翻譯對照",
|
||
"Birthday": "生日",
|
||
"Bitwise operation": "按位 (Bitwise) 运算",
|
||
"Blacklist": "黑名單",
|
||
"Black/Whitelist models": "属于 黑/白名单 的模型",
|
||
"blend": "混合",
|
||
"Blend": "混合",
|
||
"Blend Average": "平均混合",
|
||
"Blend Faces ((Source|Checkpoint)+References = 1)": "混合面部 ((图源|模型)+参考图像 = 1)",
|
||
"Blend factor max": "最大混合系数",
|
||
"Blend factor slope": "混合斜率系数",
|
||
"Blend mode": "混合模式",
|
||
"Blend multiple outputs (batch, ControlNet maps)": "混合多个输出（批处理、ControlNet 映射）",
|
||
"BLIP: maximum description length": "BLIP: 最大描述长度",
|
||
"BLIP: minimum description length": "BLIP: 最小描述长度",
|
||
"BLIP: num_beams": "BLIP: 集束搜索候选项数目",
|
||
"Block ID": "区块 ID",
|
||
"Block method": "分块模式",
|
||
"Block NSFW images of a certain threshold and higher.\n Civitai marks all images for NSFW models as also being NSFW.\n These ratings do not seem to be explicitly defined on Civitai's\n end, but \"Soft\" seems to be suggestive, with NSFW elements but\n not explicit nudity, \"Mature\" seems to include nudity but not\n always, and \"X\" seems to be explicitly adult content.": "成人内容屏蔽阈值。\n CivitAI 会将 NSFW 模型所有图像标记为成人内容。\n CivitAI 上无明确定义这些评级。\n “Soft” 可能表示暗示性的，有成人元素但不是明确的裸体；“Mature” 可能包含裸体，但不一定；“X” 可能是明确的是成人内容",
|
||
"Block NSFW images of a certain threshold and higher.\nCivitai marks all images for NSFW models as also being NSFW.\nThese ratings do not seem to be explicitly defined on Civitai's\nend, but \"Soft\" seems to be suggestive, with NSFW elements but\nnot explicit nudity, \"Mature\" seems to include nudity but not\nalways, and \"X\" seems to be explicitly adult content.": "成人内容屏蔽阈值。CivitAI 会将 NSFW 模型所有图像标记为成人内容。CivitAI 上无评级的明确定义：“Soft” 可能表示暗示性的，有成人元素但不是明确的裸体；“Mature” 可能包含裸体，但不一定；“X” 可能是明确的是成人内容",
|
||
"Block NSFW images of a certain threshold and higher. Civitai marks all images for NSFW models as also being NSFW. These ratings do not seem to be explicitly defined on Civitai's end, but \"Soft\" seems to be suggestive, with NSFW elements but not explicit nudity, \"Mature\" seems to include nudity but not always, and \"X\" seems to be explicitly adult content.": "屏蔽所选阈值及之上的成人内容。\n CivitAI 会将 NSFW 模型所有图像标记为成人内容。\n CivitAI 上无明确定义这些评级。\n “Soft” 可能表示暗示性的，有成人元素但不是明确的裸体；“Mature” 可能包含裸体，但不一定；“X” 可能是明确的是成人内容",
|
||
"Block NSFW Level Above": "成人内容屏蔽级别",
|
||
"Block size": "区块大小",
|
||
"blur": "模糊",
|
||
"Blur": "模糊",
|
||
"Blur amount:": "模糊量：",
|
||
"Blur edges of final overlay mask, if used. Minimum = 0 (no blur)": "最终覆盖蒙版的边缘模糊 (如启用) 。最小值=0 (无模糊)",
|
||
"blur_gaussian": "blur_gaussian (模糊 - 高斯模糊)",
|
||
"- Body": "- 身体",
|
||
"Body Parameters": "身体参数",
|
||
"(booru only)": "(仅 booru)",
|
||
"Booru Score Threshold": "Booru 极限阈值",
|
||
"BOOST (multi-resolution merging)": "提升（多分辨率合併）",
|
||
"border": "边框",
|
||
"Border": "邊界",
|
||
"border frames": "边界帧数",
|
||
"Border Frames": "边界帧数",
|
||
"Border Key Frames": "边界关键帧数",
|
||
"Border mode": "边界处理模式",
|
||
"both": "两者",
|
||
"Both": "两者",
|
||
"both directions": "双向",
|
||
"both passes": "两层都",
|
||
"bottom-top": "下 - 上",
|
||
"box_nms_thresh": "箱体数量阈值",
|
||
"branch": "分支",
|
||
"Branch": "分支",
|
||
"brightness": "亮度",
|
||
"Brightness": "亮度",
|
||
"Brightness:": "明亮度",
|
||
"Bring prompts and setting into one column left side": "将正反提示词输入框和设置移动到左侧",
|
||
"Browser": "浏览器",
|
||
"Browser default": "浏览器默认",
|
||
"(brush color of inpaint mask)": "(重绘蒙版画笔颜色)",
|
||
"Bucket Cropping": "批量裁剪",
|
||
"Bucket Steps": "批量Steps",
|
||
"Build": "构建",
|
||
"Build a face based on a batch list of images. Will blend the resulting face and store the checkpoint in the faceswaplab/faces directory.": "根据批量图像构建一个面部模型。会混合生成的面部并将模型存储在 “faceswaplab/faces” 目录下",
|
||
"built-in": "內建的",
|
||
"built with gradio": "基于 Gradio 构建",
|
||
"Built with Gradio": "使用 Gradio 構建",
|
||
"(Buttons will display the contents of the selected directory without acting as a search filter.)": "(按钮将显示所选文件夹的内容而非作为搜索过滤器)",
|
||
"button to free up memory.": " 按钮来释放显存",
|
||
"By comma": "逗号分组",
|
||
"By default and where supported, SVG-Edit can store your editor preferences and SVG content locally on your machine so you do not need to add these back each time you load SVG-Edit. If, for privacy reasons, you do not wish to store this information on your machine, you can change away from the default option below.": "默认情况下，SVG Edit 可以将设置和SVG图像保存在你的电脑上，因此你不需要在每次使用 SVG Edit 时重复设置。如果出于隐私因素，你不希望将信息保存在你的电脑上，你可以更改以下默认选项。",
|
||
"By default, the algorithm tends to like dark images too much, if you think the output is too dark or not dark enough, you can adjust this ratio. 1 = ‘Do not darken at all’, 0 = ‘A totally black image is ok’, default = 0.9.": "默认情况下，算法倾向于生成较黑的图像，如果你认为输出的图像太黑或不够黑，你可以调整最小照明比率。1=\"完全不变暗\"，0=\"全黑的图像\"，默认=0.9",
|
||
"By none": "不分组",
|
||
"By tokens": "词元分组",
|
||
"By vectors": "向量分组",
|
||
"By words": "单词分组",
|
||
"(C10) Thertiary": "(C10) 第三",
|
||
"(C1) Thertiary": "(C1) 第三",
|
||
"(C2) Thertiary": "(C2) 第三",
|
||
"(C3) Thertiary": "(C3) 第三",
|
||
"(C4) Thertiary": "(C4) 第三",
|
||
"(C5) Thertiary": "(C5) 第三",
|
||
"(C6) Thertiary": "(C6) 第三",
|
||
"(C7) Thertiary": "(C7) 第三",
|
||
"(C8) Thertiary": "(C8) 第三",
|
||
"(C9) Thertiary": "(C9) 第三",
|
||
"Cache FP16 weight for LoRA": "为 LoRA 缓存 FP16 权重",
|
||
"(Cache fp16 weight when enabling FP8, will increase the quality of LoRA. Use more system ram.)": "(当启用 FP8 时缓存 FP16 权重，可提升 LoRA 质量。需使用更多系统内存)",
|
||
"Cache gradio themes locally": "缓存 Gradio 主题到本地",
|
||
"Cache Latents": "快取潛在變數",
|
||
"Cache LDSR model in memory": "將 LDSR 模型快取在記憶體中",
|
||
"Cache the compiled models on disk for faster model load in subsequent launches (Recommended)": "将已编译模型缓存在磁盘上, 便于后续启动时更快地加载模型 (推荐开启)",
|
||
"Cadence": "節奏",
|
||
"Cafe Aesthetic": "Cafe 美学",
|
||
"calculate dimension of LoRAs(It may take a few minutes if there are many LoRAs)": "计算 LoRA 维度 (取决于模型数量，可能需要数分钟)",
|
||
"Calculate hash": "计算哈希值",
|
||
"Calculate hash for all checkpoint": "计算所有大模型的哈希",
|
||
"Calculate Split Loss": "計算分割損失",
|
||
"Calculate the optimal GIF palette, improves quality significantly, removes banding": "计算最优 GIF 色板，显著提升质量，消除条纹",
|
||
"- Camera": "- 镜头",
|
||
"Camera Far": "镜头最远渲染距离",
|
||
"Camera Focal Length": "镜头焦距",
|
||
"Camera Near": "镜头最近渲染距离",
|
||
"Camera Parameters": "镜头参数",
|
||
"(can be any valid CSS value, for example 768px or 20em)": "(可为任意有效 CSS 值, 例如 768px 或 20em)",
|
||
"Can be empty, indicating no translation": "可以为空，表示无需翻译",
|
||
"Can be empty,indicating no translation": "可以为空，表示无需翻译",
|
||
"Cancel": "取消",
|
||
"Cancel Download": "取消下载",
|
||
"Cancel generate forever": "取消無限產生",
|
||
"Cancel training.": "取消训练",
|
||
"canny": "canny (硬边缘检测)",
|
||
"Canny": "Canny (硬边缘)",
|
||
"Canvas Height": "畫布高度",
|
||
"Canvas Hotkeys": "画布热键",
|
||
"- Canvas Size": "- 画布尺寸",
|
||
"Canvas Width": "畫布寬度",
|
||
"Caption": "生成标签",
|
||
"Caption Backup File": "描述备份文件",
|
||
"Caption File Ext": "文件扩展名",
|
||
"Caption of Selected Image": "被选图片的描述",
|
||
"Caption: Returns a string describing the image": "描述文本: 返回的用于描述图像的字符串",
|
||
"Captions": "描述",
|
||
"Caption Text File": "描述文本文件",
|
||
"Caption type": "描述文本类型",
|
||
"Card height for Extra Networks": "額外網絡的卡片高度",
|
||
"Card height for Extra Networks (px)": "扩展模型卡牌高度 (px)",
|
||
"cards": "卡牌视图",
|
||
"Card text scale": "卡片文本大小",
|
||
"Card width for Extra Networks": "扩展模型卡片宽度",
|
||
"Card width for Extra Networks (px)": "扩展模型卡牌宽度 (px)",
|
||
"Carriage Return": "Carriage Return (回车)",
|
||
"cartoon": "cartoon (卡通)",
|
||
"Cartoon": "卡通",
|
||
"cascadePSP": "CascadePSP",
|
||
"case sensitive": "区分大小写",
|
||
"Categorical mask status": "分类蒙版状态",
|
||
"Categorys of prompt": "提示词分类",
|
||
"Catppuccin Flavor": "Catppuccin 主题样式（背景颜色）",
|
||
"⚠ Caution: You should only use these options if you know what you are doing. ⚠": "⚠ 警告：只有您知道在做什麼時才使用這些選項。⚠",
|
||
"Censor NSFW when NSFW is disabled": "当 NSFW 被禁用时过滤 NSFW 内容",
|
||
"Center Crop": "中心裁切",
|
||
"centered": "居中",
|
||
"(CF10) Checkpoint format": "(CF10) 模型格式",
|
||
"(CF1) Checkpoint format": "(CF1) 模型格式",
|
||
"(CF2) Checkpoint format": "(CF2) 模型格式",
|
||
"(CF3) Checkpoint format": "(CF3) 模型格式",
|
||
"(CF4) Checkpoint format": "(CF4) 模型格式",
|
||
"(CF5) Checkpoint format": "(CF5) 模型格式",
|
||
"(CF6) Checkpoint format": "(CF6) 模型格式",
|
||
"(CF7) Checkpoint format": "(CF7) 模型格式",
|
||
"(CF8) Checkpoint format": "(CF8) 模型格式",
|
||
"(CF9) Checkpoint format": "(CF9) 模型格式",
|
||
"cfg scale": "提示詞相關性",
|
||
"cfg_scale": "提示詞相關性（CFG）",
|
||
"CFG scale": "提示詞相關性（CFG）",
|
||
"CFG Scale": "提示詞相關性（CFG）",
|
||
"CFG scale schedule": "CFG 系数调度计划",
|
||
"changeable blocks : BASE,IN00,IN01,IN02,IN03,IN04,IN05,IN06,IN07,IN08,IN09,IN10,IN11,M00,OUT00,OUT01,OUT02,OUT03,OUT04,OUT05,OUT06,OUT07,OUT08,OUT09,OUT10,OUT11": "可更改区块: \nBASE,IN00,IN01,IN02,IN03,IN04,IN05,IN06,IN07,IN08,IN09,IN10,IN11,M00,OUT00,OUT01,OUT02,OUT03,OUT04,OUT05,OUT06,OUT07,OUT08,OUT09,OUT10,OUT11",
|
||
"Change brightness": "调节亮度",
|
||
"Change checkpoint": "切換模型權重存檔點",
|
||
"Change contrast": "调节对比度",
|
||
"Change CTRL keybindings to SHIFT": "將 Ctrl 改成 Shift 按鍵",
|
||
"Change gain": "调节增强强度",
|
||
"Change gamma": "调节伽马",
|
||
"⏱ Changelog": "⏱ 更新日志",
|
||
"Changes are not applied to the text files until the \"Save all changes\" button is pressed.": "更改不会被应用至文本文件，直到 “保存所有更改” 按钮被按下",
|
||
"Change saturation": "调节饱和度",
|
||
"(changes seeds drastically; use CPU to produce the same picture across different videocard vendors)": "(显著改变种子效果; 使用 CPU 选项可使不同型号显卡产生相同图像)",
|
||
"(changes seeds drastically; use CPU to produce the same picture across different videocard vendors; use NV to produce same picture as on NVidia videocards)": "(大幅改变种子效果, 使用 CPU 选项使不同型号显卡产生相同图像; 使用 NV 选项来产生与 NVIDIA 显卡相同的图像)",
|
||
"(changes seeds drastically; use CPU to produce the same picture across different vidocard vendors)": "(大幅改变种子效果, 使用 CPU 选项使不同型号显卡产生相同图像)",
|
||
"Change your brush width to make it thinner if you want to draw something.": "绘制内容前请先调整画笔粗细。",
|
||
"Chant filename": "Chant 文件名",
|
||
"Chant filename (Chants are longer prompt presets)": "Chant 文件名（Chant 指较长的提示词预设）",
|
||
"(Chants are longer prompt presets)": "(Chants 是较长的提示词预设)",
|
||
"character": "character (角色)",
|
||
"Chat": "聊天",
|
||
"ChatGPT Model Name": "ChatGPT 模型名称",
|
||
"Cheap neural network approximation. Very fast compared to VAE, but produces pictures with 4 times smaller horizontal/vertical resolution and lower quality.": "低負載的神經網絡近似值。與 VAE 相比非常快，但是生成的圖片横向/縱向分辨率為正常的四倍，品質較低。",
|
||
"Checkbox": "核取方塊",
|
||
"Check Console log for Downloading Status": "检查控制台日志以查看下载信息",
|
||
"Check for updates": "檢查更新",
|
||
"Check models' new version": "检查模型版本更新",
|
||
"Check models’ new version": "检索模型的新版本",
|
||
"Check New Version from Civitai": "从 Civitai 上检查版本更新",
|
||
"checkpoint": "模型",
|
||
"Checkpoint": "模型權重存檔點",
|
||
"Checkpoint A": "大模型 A",
|
||
"Checkpoint B": "大模型 B",
|
||
"Checkpoint C": "大模型 C",
|
||
"Checkpoint Dropdown": "大模型下拉列表",
|
||
"Checkpoint dropdown: use filenames without paths": "模型下拉菜单: 不显示模型对应子目录",
|
||
"Checkpoint format": "模型權重檢查點格式",
|
||
"Checkpoint Format": "模型格式",
|
||
"Checkpoint Merger": "模型權重存檔點合併",
|
||
"Checkpoint name": "模型權重存檔點的名稱",
|
||
"Checkpoints": "模型權重存檔點",
|
||
"Checkpoint schedule": "模型表",
|
||
"Checkpoints to cache in RAM": "暫存在內存（RAM）中的模型權重存檔點數",
|
||
"Check progress": "查看进度",
|
||
"checks": "检测",
|
||
"Check similarity": "检查相似度",
|
||
"Check system info for validity": "检测系统信息的有效性",
|
||
"Check tensors": "检测 tensors",
|
||
"check this box to enable guided images mode": "选中该项启用图像引导模式",
|
||
"Check this if you want to generate random prompts, even if your seed is fixed": "勾選此選項以在固定隨機種子的情況下依然產生隨機提示詞",
|
||
"* check your CLI for outputs": "* 检查 CLI 的输出",
|
||
"* check your CLI for outputs *": "* 检查 CLI 的输出 *",
|
||
"Chess": "棋盤狀",
|
||
"children's illustration": "children's illustration (儿童画作)",
|
||
"choose an algorithm/ method for keeping color coherence across the animation": "选择一种算法/方法来保持整个动画的颜色一致性",
|
||
"Choose a number of terms from a list, in this case we choose two artists:": "從列表中選幾項，這裡選了兩個藝術家",
|
||
"Choose latent sampling method": "選擇潛在變數取樣方法",
|
||
"Choose Min-max to activate these controls": "在评分过滤器选择 “最低-最高” 以激活控件",
|
||
"Choose mode:": "选择模式：",
|
||
"Choose preprocessor for semantic segmentation:": "选择语义分割的预处理器：",
|
||
"choose the frame interpolation engine and version": "选择帧插值引擎类型和版本",
|
||
"(choose Unet model: Automatic = use one with same filename as checkpoint; None = use Unet from checkpoint)": "(选择 Unet 模型: 自动 = 使用与大模型文件名相同的文件; 无 = 使用大模型中的 Unet)",
|
||
"(choose VAE model: Automatic = use one with same filename as checkpoint; None = use VAE from checkpoint)": "(选择 VAE 模型: 自动 = 选择与 Stable Diffusion 模型文件名相同的 VAE 模型; 无 = 使用所选择的 Stable Diffusion 模型的内置 VAE)",
|
||
"Choose which animation params are to be saved to the .srt file (Frame # and Seed will always be saved):": "选择要保存到 .srt 文件中的动画参数 (Frame # 和 Seed 将始终保存):",
|
||
"Choose your favorite mask:": "请选择你喜欢的蒙版：",
|
||
"chromatic": "色度",
|
||
"Chromatic": "色度",
|
||
"Cinematic": "Cinematic (电影)",
|
||
"circle": "圆形",
|
||
"City": "城市",
|
||
"cityscape": null,
|
||
"CivitAI account settings": "CivitAI 账号设置",
|
||
"Civitai Browser+": "Civitai 浏览器+",
|
||
"CivitAI Browser+": "CivitAI 浏览器+",
|
||
"Civitai Helper": "Civitai 助手",
|
||
"CivitAI Tags": "CivitAI 标签",
|
||
"Civitai URL": "Civitai 链接",
|
||
"Civitai URL or Model ID": "Civitai 地址或模型 ID",
|
||
"ckpt": "ckpt",
|
||
"Class": "组件类别",
|
||
"Class Generation Schedulers": "類別(正則) 圖像生成調度器",
|
||
"classic": "经典",
|
||
"Classification CFG Scale": "類別(正則) CFG比例",
|
||
"Classification Dataset Directory": "類別/正則數據集目錄",
|
||
"Classification Image Negative Prompt": "類別(正則) 圖像反向提示詞",
|
||
"Classification Steps": "類別(正則) 步驟",
|
||
"Classifier Free Guidance Scale - how strongly the image should conform to prompt - lower values produce more creative results": "無分類器指導訊息影響尺度（Classifier Free Guidance Scale）- 圖像應在多大程度上服從提示詞 - 較低的值會產生更有創意的結果",
|
||
"Classify type": "分类类型",
|
||
"Class Image Generation": "生成類別(正則) 圖像",
|
||
"Class Images Per Instance Image": "每個實例圖像的類別(正則) 圖片數量",
|
||
"Class prompt": "类别(Class)正向提示词",
|
||
"Class Prompt": "類別/正則提示詞",
|
||
"Class Token": "類別/正則名稱",
|
||
"clean": null,
|
||
"Cleaner": "清理器",
|
||
"Cleaner Model ID": "清理器模型",
|
||
"Cleanup non-default temporary directory when starting webui": "在啟動網頁介面時清除非預設的暫存目錄",
|
||
"Clear": "清除",
|
||
"Clear all": "清空全部",
|
||
"Clear ALL filters": "清除所有过滤器",
|
||
"Clear Cache": "清除缓存",
|
||
"Clear Images": "清空图像",
|
||
"Clear prompt": "清除提示詞",
|
||
"Clear selection": "清空选择",
|
||
"Clear tag filters": "标签清除过滤器",
|
||
"Clear values": "清空数值",
|
||
"Click Enhance.": "点击“增强”按钮",
|
||
"Click Here": "点击这里",
|
||
"Click here after the generation to show the video": "生成完成后点这里显示视频",
|
||
"click here to gather relevant info": "点击此处以收集相关信息",
|
||
"Click on the files that appear in the tree to edit them.": "选择下方列表中的文件来进行编辑",
|
||
"Click on the \"Generate Default Engines\" button. This step can take 2-10 min depending on your GPU. You can generate engines for other combinations.": "点击 “生成默认引擎” 按钮。此步骤可能需要 2 - 10 分钟，具体时间长短取决于 GPU。可使用其他组合生成引擎。",
|
||
"Click the search icon to load models.": "点击检索图标以加载模型信息",
|
||
"click to download": "点击以下载",
|
||
"Click to Upload": "點選以上傳",
|
||
"Clip and renormalize": "衰减与规格化",
|
||
"🕵️♂️ CLIP Interrogator 🕵️♂️": "🕵️♂️ CLIP 反推 🕵️♂️",
|
||
"CLIP Interrogator on Github": "GitHub上的 CLIP Interrogator (CLIP 反推扩展)",
|
||
"CLIP Maximum length": "最小 CLIP 長度",
|
||
"CLIP: maximum number of lines in text file": "CLIP: 文本文件的最大行数",
|
||
"CLIP Minimum length": "最小 CLIP 長度",
|
||
"CLiP model": "CLiP 模型",
|
||
"CLIP Model": "CLIP 模型",
|
||
"CLIP models:": "CLIP 模型:",
|
||
"clipseg": "CLIP 分割",
|
||
"clipseg options": "CLIPSeg 选项",
|
||
"Clip skip": "Clip 跳過層",
|
||
"Clip skip:": "CLIP 终止层数:",
|
||
"Clip Skip": "Clip 跳過層",
|
||
"CLIP Skip": "CLIP 终止层数",
|
||
"Clip skip (2 if training anime model)": "CLIP 终止层数 (训练二次元模型时调至 2)",
|
||
"CLIP: skip inquire categories": "CLIP：跳過詢問類別",
|
||
"CLIP: skip inquire categories: refresh": "CLIP: 跳过查询类别: 刷新",
|
||
"CLIP skip schedule": "CLIP 终止层数调度计划",
|
||
"CLIP tensors checker": "Clip tensors 检测",
|
||
"clip_threshold": "裁剪阈值",
|
||
"clone repositores": "克隆仓库",
|
||
"Close": "關閉",
|
||
"Closed": "关闭",
|
||
"Closed loop": "闭环",
|
||
"Close Preview": "关闭预览",
|
||
"Closer is brighter": "越近越亮",
|
||
"Close the video": "关闭视频",
|
||
"cloudscape": "cloudscape (云景)",
|
||
"cluster num": "簇数",
|
||
"Codec": "编码器",
|
||
"CodeFormers (Face restoration)": "CodeFormers (面部修复)",
|
||
"CodeFormer vis.": "CodeFormer 可见程度",
|
||
"CodeFormer visibility": "CodeFormer 可見度",
|
||
"codeformer weight": "CodeFormer 强度",
|
||
"CodeFormer weight": "CodeFormer 强度",
|
||
"CodeFormer Weight": "CodeFormer 强度",
|
||
"CodeFormer weight (0 = maximum effect, 1 = minimum effect)": "CodeFormer 權重 （為 0 時效果最大，為 1 時效果最小）",
|
||
"CodeFormer weight parameter; 0 = maximum effect; 1 = minimum effect": "CodeFormer 强度参数; 0 = 效果最强; 1 = 效果最弱",
|
||
"Coherence": "一致性",
|
||
"🦒 Colab Run Command": "🦒 Colab 运行命令",
|
||
"collage": null,
|
||
"Collage": null,
|
||
"Collection actions": "合集操作",
|
||
"Color": "色彩",
|
||
"color_burn": "加深顏色",
|
||
"color_coherence": "颜色一致性",
|
||
"Color coherence": "颜色一致性",
|
||
"Color coherence may be used with hybrid composite off, to just use video color.": "颜色一致性可以在混合合成关闭的情况下使用, 针对视频色彩",
|
||
"color_coherence_video_every_N_frames": "每 N 帧校正视频颜色",
|
||
"Color correction factor": "颜色校正系数",
|
||
"🎨 Color Correction Settings": "🎨 颜色校正设置",
|
||
"color_dodge": "加亮顏色",
|
||
"Color Fix": "颜色修正",
|
||
"Color force Grayscale": "强制颜色空间为灰度",
|
||
"colorful": null,
|
||
"[color-matcher]": "颜色匹配器",
|
||
"Color Matcher Ref Image": "颜色匹配器参考图",
|
||
"Color Matcher Ref Image Type": "颜色匹配器参考图类型",
|
||
"color mode": "颜色模式",
|
||
"Color reduce algo": "色彩减弱算法",
|
||
"colors": "色块",
|
||
"Color sketch inpainting": "彩繪修復",
|
||
"Color Transfer Method": "颜色迁移算法",
|
||
"Color variation": "色彩變化",
|
||
"Combinations": "組合",
|
||
"Combinatorial batches": "組合批次",
|
||
"Combinatorial generation": "組合生成",
|
||
"Combine axis": "拼合方向",
|
||
"Combined": "結合",
|
||
"Combine input and depthmap into one image": "原图和深度图拼合为一张",
|
||
"Combine interrogations": "合并反推",
|
||
"Combine into one image": "拼合为一张图像",
|
||
"Combine LoCon, LORA & DoRA as one option": "将 LoCon, LORA 和 DoRA 合并为一个选项",
|
||
"ComfyUI install location": "ComfyUI 安装路径",
|
||
"ComfyUI server graceful termination timeout (in seconds) when reloading the gradio UI (-1 to block until the ComfyUI server exits normally)": "UI 重载时 ComfyUI 服务器最长平稳退出时间限制 (秒) (-1 代表持续等待 ComfyUI 服务器正常退出)",
|
||
"Comic Book": null,
|
||
"comics": null,
|
||
"comma": "逗號",
|
||
"Comma separated face number(s)": "逗号分隔的面部编号",
|
||
"Comma-separated list of tab names; tabs listed here will appear in the extra networks UI first and in order lsited.": "以逗號分隔的選項卡名稱列表；在此列出的選項卡將首先出現在額外網路的用戶界面中，並按照列出的順序。",
|
||
"Comma-separated list of tags (\"artist, style, character, 2d, 3d...\")": "此模型的標記列表（\"artist, style, character, 2d, 3d...\"）",
|
||
"Commit": "提交",
|
||
"Common Tags": "原标签 (Common Tags)",
|
||
"Compact prompt layout": "紧凑型提示词布局",
|
||
"Comp alpha schedule": "透明度组合调度计划",
|
||
"Compare": "比较",
|
||
"Compatibility": "相容性",
|
||
"Compatibility with ControlNet": "与 ControlNet 的兼容性",
|
||
"Compatibility with other extensions": "与其他扩展的兼容性",
|
||
"Compatible with Python v3.10.6 and WebUI v1.5.1.": "兼容 Python v3.10.6 与 WebUI v1.5.1。",
|
||
"Compatible with Python v3.10.6 and WebUI v1.6.0.": "兼容 Python v3.10.6 与 WebUI v1.6.0。",
|
||
"Complete documentation is available at https://github.com/adieyal/sd-dynamic-prompts. Please report any issues on GitHub.": "完整說明請在 https://github.com/adieyal/sd-dynamic-prompts 上取得。 任何問提請在 GitHub 上報告。",
|
||
"Comp mask auto contrast": "自动对比度合成蒙版",
|
||
"Comp mask auto contrast cutoff high schedule": "合成蒙版自动对比度隔离高值调度计划",
|
||
"Comp mask auto contrast cutoff low schedule": "合成蒙版自动对比度隔离低值调度计划",
|
||
"Comp mask blend alpha schedule": "合成蒙版透明度混合调度计划",
|
||
"Comp mask contrast schedule": "合成蒙版对比度调度计划",
|
||
"Comp mask equalize": "合成蒙版量化",
|
||
"Comp mask inverse": "合成蒙版反转",
|
||
"Comp mask type": "合成蒙版类型",
|
||
"Component": "模型组件",
|
||
"Composable Mask scheduling": "蒙版组合调度计划",
|
||
"Composite audio files extracted from the original video onto the concatenated video.": "将原始视频中的音频整合到生成的视频中。",
|
||
"Composite video with previous frame init image in": "前一帧初始图像的合成视频在",
|
||
"Comp save extra frames": "保存合成过程所有额外帧",
|
||
"Compute Settings": "计算设置",
|
||
"Compute similarity": "计算相似度",
|
||
"Concatenate each frame while crossfading.": "在交叉融合运算时串联每一帧。",
|
||
"Concavity of distortion of circles": "圆形变形的凹凸程度",
|
||
"concept": null,
|
||
"Concept 1": "概念 1",
|
||
"Concept 2": "概念 2",
|
||
"Concept 3": "概念 3",
|
||
"Concept 4": "概念 4",
|
||
"concept art": null,
|
||
"concept - Can be a concept, such as “a X of Y”, or an historical event such as “The Trojan War”.": "concept - 概念 - 可以是一种概念：例如一个事物的某种特质；或者是一个历史事件，例如 “特洛伊战争“ 。",
|
||
"Concepts": "概念",
|
||
"Concepts List": "概念列表",
|
||
"Config Backup: Config": "配置备份：配置",
|
||
"Config file for Adapter models": "Adapter 模型配置文件路径",
|
||
"Config file for Control Net models": "ControlNet 模型配置文件路径",
|
||
"Config Name": "配置名",
|
||
"Config Presets": "预设配置",
|
||
"Config-Presets": "配置預設值",
|
||
"Config state file to restore from, under 'config-states/' folder": "用于还原的配置状态文件, 位于 'config-states/' 文件夹",
|
||
"configuration": "插件设置",
|
||
"configuration for": "详细设置",
|
||
"Configure colors. See the Settings section in the README for more info. Must be valid JSON.": "配置颜色。更多信息请查看 README 中的 \"Settings (设置)\" 部分。需要有效的 JSON。",
|
||
"Configure Hotkeys. For possible values, see https://www.w3.org/TR/uievents-key, or leave empty / set to 'None' to disable. Must be valid JSON.": "配置热键。对于可能的取值，请查看该链接: https://www.w3.org/TR/uievents-key ，留空或设置为 '无' 来禁用。需要有效的 JSON。",
|
||
"Connect": "连接",
|
||
"Connecting": "连接中",
|
||
"Connection errored out.": "连接出错",
|
||
"Consider a donation on ko-fi! :3": "考虑在 ko-fi 上为本插件赞助! :3",
|
||
"Consistency mask blur": "一致性蒙版模糊",
|
||
"Console logging": "控制台日志记录",
|
||
"Console log tag counts per file, no progress bar": "逐文件在控制台输出标签计数日志 (无进度条)",
|
||
"Containing directory": "目標模型目錄",
|
||
"Content type:": "内容类别: ",
|
||
"Content Type:": "内容类别: ",
|
||
"Context batch size": "上下文单批数量",
|
||
"contrast": "对比度",
|
||
"Contrast": "对比度",
|
||
"Contrast:": "对比度",
|
||
"Contrast schedule": "对比度调度计划",
|
||
"control animation mode, will hide non relevant params upon change": "动画控制模式，会在修改模式后自动隐藏不相关参数",
|
||
"Control Mode": "控制模式",
|
||
"Control Mode (Guess Mode)": "控制类型 (猜测模式)",
|
||
"controlnet: A neural network structure to control diffusion models by adding extra conditions. Check manual for setup info.": "ControlNet: 一种通过添加额外条件来控制扩散模型的神经网络结构。请查看手册了解如何设置。",
|
||
"ControlNet Fastload": "ControlNet 快速配置",
|
||
"Controlnet Fastload Filter": "Controlnet Fastload 筛选器",
|
||
"Controlnet Fastload First": "Controlnet Fastload 优先",
|
||
"ControlNet Fastload Plugin First": "ControlNet Fastload 扩展优先",
|
||
"Controlnet First": "Controlnet 优先",
|
||
"ControlNet guidance end": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 10th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 2nd": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 3rd": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 4th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 5th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 6th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 7th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 8th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 9th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance start": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 10th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 2nd": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 3rd": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 4th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 5th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 6th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 7th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 8th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 9th": "ControlNet 引导介入时机",
|
||
"ControlNet Info": "ControlNet 信息",
|
||
"ControlNet Inpaint": "ControlNet 重绘",
|
||
"ControlNet Inpaint Index": "ControlNet 重绘单元序号",
|
||
"ControlNet inpainting Gaussian blur sigma": "ControlNet 重绘高斯模糊 Sigma",
|
||
"ControlNet inpaint model index": "ControlNet 的 inpaint 模型启用单元页",
|
||
"ControlNet inpaint not masked": "ControlNet 重绘不使用蒙版",
|
||
"ControlNet Inpaint Number": "ControlNet 重绘序号",
|
||
"Controlnet input directory": "Controlnet輸入目錄",
|
||
"ControlNet input directory": "ControlNet 的输入目录",
|
||
"ControlNet Input Video/ Image Path": "ControlNet 输入 视频/图像 的路径",
|
||
"ControlNet Input Video Path": "ControlNet 输入视频路径",
|
||
"ControlNet is more important": "ControlNet更重要",
|
||
"ControlNet Mask Video/ Image Path (*NOT WORKING, kept in UI for CN's devs testing!*)": "ControlNet 蒙版 视频/图像 的路径 (*暂时不可用, 保留在 UI 中方便 ControlNet 的开发测试*)",
|
||
"ControlNet Mask Video Path": "ControlNet 视频蒙版路径",
|
||
"ControlNet model": "ControlNet 模型",
|
||
"ControlNet model 10th": "ControlNet 模型",
|
||
"ControlNet model 2nd": "ControlNet 模型",
|
||
"ControlNet model 3rd": "ControlNet 模型",
|
||
"ControlNet model 4th": "ControlNet 模型",
|
||
"ControlNet model 5th": "ControlNet 模型",
|
||
"ControlNet model 6th": "ControlNet 模型",
|
||
"ControlNet model 7th": "ControlNet 模型",
|
||
"ControlNet model 8th": "ControlNet 模型",
|
||
"ControlNet model 9th": "ControlNet 模型",
|
||
"ControlNet Model ID": "ControlNet 模型",
|
||
"ControlNet model index": "ControlNet 模型编号",
|
||
"ControlNet number": "ControlNet 单元序号",
|
||
"ControlNet option": "ControlNet 选项",
|
||
"ControlNet options": "ControlNet 选项",
|
||
"ControlNet Plugin First": "ControlNet 扩展优先",
|
||
"[ControlNet] Preprocessor": "[ControlNet] 預處理器",
|
||
"ControlNet Preprocessor": "ControlNet 预处理器",
|
||
"[ControlNet] Pre Resolution": "[ControlNet] 解析度",
|
||
"[ControlNet] Pre Threshold A": "[ControlNet] 閾值 A",
|
||
"[ControlNet] Pre Threshold B": "[ControlNet] 閾值 B",
|
||
"[ControlNet] Resize Mode": "[ControlNet] 縮放模式",
|
||
"ControlNet Segmentation Index": "ControlNet 语义分割 Unit 序号",
|
||
"Controlnet tile model name": "Controlnet tile 模型名",
|
||
"ControlNet Unit 0": "ControlNet 单元 0",
|
||
"ControlNet Unit 1": "ControlNet 单元 1",
|
||
"ControlNet Unit 2": "ControlNet 单元 2",
|
||
"ControlNet Unit 3": "ControlNet 单元 3",
|
||
"ControlNet Unit 4": "ControlNet 单元 4",
|
||
"ControlNet Unit 5": "ControlNet 单元 5",
|
||
"ControlNet Unit 6": "ControlNet 单元 6",
|
||
"ControlNet Unit 7": "ControlNet 单元 7",
|
||
"ControlNet Unit 8": "ControlNet 单元 8",
|
||
"ControlNet Unit 9": "ControlNet 单元 9",
|
||
"ControlNet Video Input": "ControlNet 视频输入",
|
||
"ControlNet Video Mask Input": "ControlNet 视频蒙版输入",
|
||
"ControlNet weight": "ControlNet 权重",
|
||
"[ControlNet] Weight": "[ControlNet] 權重",
|
||
"Control Net Weight": "ControlNet 权重",
|
||
"ControlNet weight 10th": "ControlNet 权重",
|
||
"ControlNet weight 2nd": "ControlNet 权重",
|
||
"ControlNet weight 3rd": "ControlNet 权重",
|
||
"ControlNet weight 4th": "ControlNet 权重",
|
||
"ControlNet weight 5th": "ControlNet 权重",
|
||
"ControlNet weight 6th": "ControlNet 权重",
|
||
"ControlNet weight 7th": "ControlNet 权重",
|
||
"ControlNet weight 8th": "ControlNet 权重",
|
||
"ControlNet weight 9th": "ControlNet 权重",
|
||
"Control Net Weight For Face": "ControlNet 脸部权重",
|
||
"controls for how many frames the same seed should stick before iterating to the next one": "控制在迭代到下一个新种子之前该种子应使用多少帧",
|
||
"controls pixel generation method for images smaller than the frame. hover on the options to see more info": "控制小于设定画布的图像的像素生成模式。鼠标指针悬停在选项上以查看更多信息",
|
||
"Controls the contrast of the composite mask. 0.5 if half, 1 is normal contrast, 2 is double, etc.": "控制合成蒙版的对比度。0.5为一半对比度，1为正常对比度，2为双倍对比度，以此类推。",
|
||
"controls the handling of pixels outside the field of view as they come into the scene": "选择视场外像素进入场景时的处理方式",
|
||
"Controls the maximum length in tokens of the generated prompt.": "按標記數控制已產生的提示詞最大長度",
|
||
"controls the seed behavior that is used for animation. hover on the options to see more info": "控制用于制作动画的随机数种子行为。悬浮鼠标指针在不同选项上查看更多信息。",
|
||
"controls the seed behavior that is used for animation. Hover on the options to see more info": "控制用于制作动画的随机数种子行为。悬浮鼠标指针在不同选项上查看更多信息。",
|
||
"Controls the strength of the diffusion on the init image. 0 = disabled": "控制初始化图像生成器的强度。 0 = 禁用",
|
||
"controls which sampler to use at a specific scheduled frame": "控制在特定调度计划的帧使用什么采样方法",
|
||
"Control Type": "控制类型",
|
||
"Control Weight": "控制權重",
|
||
"convert": "转换",
|
||
"Convert": "转换",
|
||
"Convert a 360 spherical panorama to a 3D mesh": "将单张 360° 球形全景图转换为 3D 网格",
|
||
"Convert a single 2D image to a 3D mesh": "将单张 3D 图像转换为 3D 网格",
|
||
"Convert currently loaded checkpoint into ONNX. The conversion will fail catastrophically if TensorRT was used at any point prior to conversion, so you might have to restart webui before doing the conversion.": "将当前加载的 checkpoint 转换为 ONNX 模型。如果在转换前的任意时间加载了 TensorRT, 转换会失败。推荐在转换前重启 webui",
|
||
"Converted checkpoints will be saved in your": "转换出的模型将会保存在你的",
|
||
"Convert excessive brackets to weights": "多余括号转换为权重",
|
||
"Convert Folder": "转换该目录",
|
||
"Convert ONNX to TensorRT": "将 ONNX 模型转换为 TensorRT 模型",
|
||
"Convert spaces to underscores (default: underscore to spaces)": "空格转换为下划线 (默认: 下划线转换为空格)",
|
||
"Convert to ONNX": "转换为 ONNX 模型",
|
||
"Convert to TensorRT": "转换到 TensorRT",
|
||
"Convert Unet to ONNX": "转换 Unet 为 ONNX 模型",
|
||
"copy": "複製",
|
||
"Copy": "複製",
|
||
"Copy and Overwrite": "复制与覆写",
|
||
"Copy caption from selected images automatically": "自动从被选图片中复制描述",
|
||
"Copy collection": "複製選集",
|
||
"Copy config from": "複製配置自",
|
||
"Copy image to:": "複製圖片到：",
|
||
"Copy main UI prompt to style.": "复制主界面的提示词到预设样式",
|
||
"Copy Metadata": "複製中繼資料",
|
||
"Copy metadata from merged models": "从融合模型中复制元数据",
|
||
"Copy metadata to other models in directory": "複製中繼資料至其他目錄中的模型",
|
||
"Copy or move captions together": "复制或一起移动描述文本文件",
|
||
"Copy path to clipboard": "将路径复制到剪贴板",
|
||
"copy to clipboard": "複製到剪貼簿",
|
||
"📋 Copy to clipboard": "📋 复制到剪切板",
|
||
"Copy to ControlNet Inpainting": "复制到 ControlNet 重绘",
|
||
"Copy to ControlNet Segmentation": "复制到 ControlNet 语义分割",
|
||
"Copy to favorites": "复制到收藏夹",
|
||
"Copy to Inpaint Upload & ControlNet Inpainting": "复制到局部重绘和 ControlNet 重绘",
|
||
"Copy to txt2img ControlNet Inpainting": "复制到文生图 ControlNet 重绘中",
|
||
"cosine": "餘弦（cosine）",
|
||
"cosine_with_restarts": "含重啟的餘弦（cosine）",
|
||
"Country": "国家",
|
||
"Count tokens of enabled styles": "计入预设样式中的提示词词元长度",
|
||
"Cover image": "封面圖像",
|
||
"Cozy Image Browser": "Cozy 图库浏览器",
|
||
"Cozy Nest Image Browser": "Cozy Nest 图库浏览器",
|
||
"Craft Clay": "Craft Clay (手工粘土)",
|
||
"Create": "建立",
|
||
"create a gif in addition to .mp4 file. supports up to 30 fps, will self-disable at higher fps values": "除 MP4 文件外额外创建 GIF 文件。最高支持30帧，在更高的帧数设置下会自动禁用本选项",
|
||
"Create a new model.": "创建一个新的模型",
|
||
"Create animation": "创建动画",
|
||
"Create an upscaled version of the current image using hires fix settings.": "使用高分辨率修复设置创建当前图像的放大版本",
|
||
"Create a text file next to every image with generation parameters.": "儲存圖像時，在每個圖像旁邊建立一個文本檔案儲存生成參數",
|
||
"Create a text file with infotext next to every generated image": "在每张生成的图像旁创建包含生成信息的文本文件",
|
||
"Create blank canvas": "创建空白画布",
|
||
"Create classification images using training settings without training.": "不开启训练的情况下使用训练的参数设置创建类别图像。",
|
||
"Created at:": "创建时间：",
|
||
"Create debug image": "建立除錯圖像",
|
||
"Create embedding": "建立嵌入",
|
||
"Create flipped copies": "建立鏡像副本",
|
||
"Create From Hub": "從 huggingface 建立",
|
||
"Create hypernetwork": "建立超網路（Hypernetwork）",
|
||
"Create mask": "创建蒙版",
|
||
"Create Mask": "创建蒙版",
|
||
"Create mask area": "创建蒙版区域",
|
||
"Create Model": "建立模型",
|
||
"<create new>": "<新建>",
|
||
"Create New Canvas": "創建新畫布",
|
||
"Create Project": "创建项目",
|
||
"Creates animation sequence from denoised intermediate steps with video frame interpolation to achieve desired animation duration": "利用视频插值从降噪过程的中间步骤图像中生成动画",
|
||
"create time": "按创建时间",
|
||
"Create txt2img canvas": "创建文生图画布",
|
||
"create ui": "创建 UI",
|
||
"Create Version": "创建版本",
|
||
"Create your wildcard library by copying a collection using the dropdown below.": "通过使用下面的下拉列表复制一个集合来创建你的通配符库",
|
||
"Create your wildcard library by copying a collection using the dropdown in the Collection actions.": "通过 \"合集操作\" 中下拉菜单中的复制合集选项，创建通配符库",
|
||
"Create zip archive when downloading multiple images": "下载多张图片时通过 zip 打包",
|
||
"CRF": "固定码率因子 (CRF)",
|
||
"crop": "裁剪",
|
||
"Crop and resize": "裁剪",
|
||
"Crop and Resize": "裁剪並調整大小",
|
||
"Crop ControlNet input image only when invoking upscale script.(If not chekced, ControlNet input image will also be cropped when invoking inpaint with inpaint area set to 'Only masked')": "仅当调用放大脚本时裁剪 ControlNet 输入图像 (若无检查, ControlNet 输入图像也会在调用重绘时重绘区域设置为 \"仅重绘蒙版内容\" 时被修剪)",
|
||
"Crop Images": "裁切圖像",
|
||
"crop left coordinate": "左侧裁剪坐标",
|
||
"crop_n_layers": "分层层数",
|
||
"crop_nms_thresh": "分层数量阈值",
|
||
"crop_n_points_downscale_factor": "分层采样点坍缩因子",
|
||
"crop_overlap_ratio": "分层重叠度",
|
||
"Cropping": "裁切",
|
||
"crops_n_layers": "分层层数",
|
||
"Crop thumbnail to square": "裁剪缩略图为正方形",
|
||
"Crop to fit": "裁剪以適應寬高比",
|
||
"crop top coordinate": "顶部裁剪坐标",
|
||
"Crop: top, left, bottom, right": "裁切：顶部，左侧，顶部，右侧",
|
||
"Cross-attention": "Cross-Attention 优化方案",
|
||
"Cross attention optimization": "Cross-Attention 优化方案",
|
||
"Cross-Attention Visualizer": "Cross-Attention 可视化",
|
||
"Crossfade blend rate": "交叉融合强度",
|
||
"csv file with columns for filenames and prompts": "列有文件名和提示词的 csv 文件",
|
||
"Ctrl+up/down precision when editing (attention:1.1)": "編輯時使用 Ctrl + up/down 調整精度 (注意：1.1)",
|
||
"Ctrl+up/down precision when editing <extra networks:0.9>": "編輯時使用 Ctrl + up/down 調整精度 <額外網路：0.9>",
|
||
"Ctrl+up/down whitespace delimiters": "通过 Ctrl+Up/Down 控制的空白分隔符",
|
||
"Ctrl+up/down word delimiters": "可以使用 Ctrl + ↑/↓ 设置权重的\"提示词分隔符类型\"",
|
||
"Ctrl + wheel": "Ctrl + 滾輪",
|
||
"cubism": null,
|
||
"Cubist": "Cubist (立体派)",
|
||
"CUDA Settings": "CUDA 设置",
|
||
"Current": "Current (当前/当前帧)",
|
||
"Current batch": "当前批次",
|
||
"Current Cache": "当前缓存目录",
|
||
"Current Dataset to be trained": "当前训练所用数据集",
|
||
"Currently only supports PNG from webui. Param from NovelAI soon.": "当前仅支持 webui 的 PNG 图片信息 (NovelAI 的参数提取支持会尽快跟进)",
|
||
"currently selected model": "当前选择的模型",
|
||
"Current Model": "当前模型",
|
||
"Current page": "当前页面",
|
||
"Current page:": "当前页面:",
|
||
"Current ranking": "当前评分",
|
||
"Current version": "当前版本",
|
||
"Custom Aria2 command line flags": "自定义 Aria2 命令行参数",
|
||
"Custom code": "自定义代码",
|
||
"Custom Config File": "自定义配置文件",
|
||
"Custom EXIF": "自定义 EXIF 文本",
|
||
"Custom Model Name": "自定義模型名稱",
|
||
"Custom Name (Optional)": "自訂名稱 （可選）",
|
||
"Custom parameters": "自定义参数",
|
||
"Custom save images location": "自定义保存图像位置",
|
||
"Custom settings file": "自訂設定檔",
|
||
"Custom size": "自訂尺寸",
|
||
"Custom VAE": "自定义 VAE",
|
||
"custum name": "自定义名称",
|
||
"Cutoff strongly.": "强效分隔",
|
||
"Cut video in to segments": "视频剪辑成片段",
|
||
"Cut white margin from input": "从输入中剪切空白区域",
|
||
"Cyan | Red": "青色 | 红色",
|
||
"Cycle BG": "轮转背景图",
|
||
"Daam script": "Daam 脚本",
|
||
"dark": "dark (暗黑)",
|
||
"darken": "變暗",
|
||
"Dataset": "数据集",
|
||
"Dataset directory": "資料集目錄",
|
||
"Dataset Directory": "實例圖像數據目錄",
|
||
"Dataset folder structure": "資料集資料夾結構",
|
||
"Dataset Images": "数据集图片",
|
||
"Dataset Load Settings": "数据集加载设置",
|
||
"Dataset size:": "数据集大小",
|
||
"Dataset Tag Editor": "數據集標記編輯器",
|
||
"date": "日期",
|
||
"Date": "日期",
|
||
"Date:": "日期: ",
|
||
"Date Created": "创建日期",
|
||
"Date Modified": "修改日期",
|
||
"Date Modified (newest first)": "修改日期 (优先最新)",
|
||
"Date Modified (oldest first)": "修改日期 (优先最旧)",
|
||
"Date trained:": "训练日期:",
|
||
"DDIM Eta": "DDIM 采样方法的 Eta 系数",
|
||
"debug": "调试",
|
||
"Debug": "调试",
|
||
"Debug Buckets": "除錯",
|
||
"Debug info": "调试信息",
|
||
"Debug Infos": "调试信息",
|
||
"Debug level": "调试等级",
|
||
"Debug log": "调试日志",
|
||
"Debug Mode 🡢 debug": "调试模式 🡢 debug",
|
||
"Decode CFG scale": "解碼提示詞相關性",
|
||
"Decoder Tile Size": "解碼器分塊尺寸",
|
||
"Decode steps": "解碼疊代步數",
|
||
"Dedicated negative prompt": "专门的负面提示词",
|
||
"deepbooru: escape () brackets": "deepbooru: 转义 (\\) 括号",
|
||
"deepbooru: filter out those tags": "deepbooru: 过滤以下标签",
|
||
"deepbooru: score threshold": "deepbooru: 评分阈值",
|
||
"deepbooru: sort tags alphabetically": "deepbooru: 按字母顺序排序标签",
|
||
"deepbooru: use spaces in tags": "deepbooru: 在标签间使用空格",
|
||
"default": "默认",
|
||
"Default": "默认",
|
||
"(default brush color of img2img inpaint sketch)": "(图生图涂鸦重绘默认画笔颜色)",
|
||
"(default brush color of img2img sketch)": "(图生图涂鸦默认画笔颜色)",
|
||
"Default Image CFG": "默认图像引导系数 (CFG)",
|
||
"Default Input Batch Output Directory": "默认批量导入输出文件目录",
|
||
"default LoRA multiplier": "默认 LoRA 强度倍率",
|
||
"Default magic prompt model": "默认魔法提示词模型",
|
||
"Default multiplier for extra networks": "扩展模型的默认强度倍率",
|
||
"Default Options Button": "默认选项按钮",
|
||
"Default order:": "默认排序: ",
|
||
"Default order field for Extra Networks cards": "扩展模型卡片默认排序方式",
|
||
"Default order for Extra Networks cards": "扩展模型卡片默认数据排序方式",
|
||
"Default Out Batches": "默认输出批次数",
|
||
"Defaults": "默认设置",
|
||
"Default Sampler": "默认采样方法(Sampler)",
|
||
"Default scoring type": "默认评分类型",
|
||
"Default Sort": "默认排序",
|
||
"Default Steps": "默认迭代步数(Steps)",
|
||
"Default sub folders": "默认子文件夹",
|
||
"Default Text CFG": "默认文本引导系数(CFG)",
|
||
"Default Upscaled swapper color corrections (requires restart)": "默认放大变换结果时校正颜色 (需重启)",
|
||
"Default Upscaled swapper face restorer (requires restart)": "默认放大变换面部修复模型 (需重启)",
|
||
"Default Upscaled swapper face restorer visibility (requires restart)": "默认放大变换面部修复可见程度 (需重启)",
|
||
"Default Upscaled swapper face restorer weight (codeformer) (requires restart)": "默认放大变换面部修复权重 (CodeFormer) (需重启)",
|
||
"Default Upscaled swapper mask erosion factor, 1 = default behaviour. The larger it is, the more blur is applied around the face. Too large and the facial change is no longer visible. (requires restart)": "默认放大变换蒙版腐蚀系数，1 = 默认行为。系数越大面部周围越模糊。若过大则面部变换不明显 (需重启)",
|
||
"Default Upscaled swapper sharpen": "默认放大变换结果时锐化",
|
||
"Default Upscaled swapper upscaler (Recommanded : LDSR but slow) (requires restart)": "默认放大变换结果的放大算法 (推荐: LDSR, 但可能有点慢) (需重启)",
|
||
"Default upscaler for image resize operations": "默认图像缩放算法",
|
||
"Default Use improved segmented mask (use pastenet to mask only the face) (requires restart)": "默认使用改进的分割蒙版 (仅对面部使用 pastenet 蒙版) (需重启)",
|
||
"default variables: in {}, like {init_mask}, {video_mask}, {everywhere}": "默认变量：\\{\\}，比如 \\{init_mask\\}, \\{video_mask\\}, \\{everywhere\\}",
|
||
"Default view for Extra Networks": "額外網絡的默認視圖",
|
||
"Default width for the Extra Networks directory tree view": "扩展模型树状目录视图的默认宽度",
|
||
"defines the seed behavior that is used for animations": "定义用于制作动画的随机数种子行为",
|
||
"❌ Del": "❌ 删除",
|
||
"delete": "删除",
|
||
"❌Delete": "❌删除",
|
||
"Delete": "刪除",
|
||
"Delete 0-entries from exif cache": "从 EXIF 缓存删除 0-entries",
|
||
"Delete All Inputframes": "删除全部输入帧",
|
||
"Delete all preview image": "删除所有预览图片",
|
||
"Delete all wildcards": "刪除全部萬用字元",
|
||
"DELETE cannot be undone. The files will be deleted completely.": "删除操作无法撤销，文件会被完全删除。",
|
||
"DELETE File(s)": "删除文件",
|
||
"Delete Imgs": "删除图像",
|
||
"Delete intermediate": "删除临时文件",
|
||
"Delete intermediate frames after GIF generation": "生成 GIF 后删除临时帧图片",
|
||
"(Delete keyframe, or Add keyframe from ": "(删除或增加关键帧，关键帧文件夹： ",
|
||
"Delete known junk data": "删除已知垃圾数据",
|
||
"Delete Model": "删除模型",
|
||
"delete next": "刪除後 N 張",
|
||
"Delete old version after download": "下载完成后删除旧版本",
|
||
"Delete old version(s) after download": "下载后删除旧版本",
|
||
"delete or keep raw affected (interpolated/ upscaled depending on the UI section) png imgs": "删除或保留受影响的原始 (根据 UI 设置进行插值/放大) PNG 图像",
|
||
"Delete Selected Skeleton (D key)": "删除选中骨架 (D 键)",
|
||
"Delete Style": "删除样式",
|
||
"DemonCrawl Avatar Generator": "DemonCrawl 头像生成器",
|
||
"Denoise": "重繪幅度",
|
||
"Denoise strength": "重绘幅度",
|
||
"Denoising": "重繪幅度",
|
||
"Denoising Diffusion Implicit Models - best at inpainting": "Denoising Diffusion Implicit models - 最擅長局部重繪",
|
||
"Denoising strenght": "重绘幅度",
|
||
"Denoising strength": "重繪幅度",
|
||
"Denoising strength curve": "降噪強度曲線",
|
||
"Denoising strength for face images": "脸部重绘幅度",
|
||
"Denoising strength for the entire image": "全图重绘幅度",
|
||
"Denoising strength (Inpaint)": "局部重绘幅度",
|
||
"Denoising strength webui": "webui 重绘幅度",
|
||
"Depth": "Depth (深度)",
|
||
"Depth Algorithm": "深度算法",
|
||
"depth_hand_refiner": "depth_hand_refiner (深度手部细化)",
|
||
"depth_leres": "depth_leres (LeReS 深度图估算)",
|
||
"depth_leres++": "depth_leres++ (LeReS 深度图估算++)",
|
||
"Depth Map": "深度图",
|
||
"Depth Maps": "深度圖",
|
||
"depth_midas": "depth_midas (MiDaS 深度图估算)",
|
||
"Depth (Midas/Adabins)": "深度模式 (Midas / Adabins)",
|
||
"Depth Output": "深度图输出",
|
||
"Depth Prediction": "深度估计预处理",
|
||
"Depth Prediction demo": "深度估计预处理 Demo",
|
||
"Depth Warping & FOV": "深度变形 & 视场角",
|
||
"depth_zoe": "depth_zoe (ZoeDepth 结合相对和绝对深度)",
|
||
"Descending": "降序",
|
||
"Description": "描述",
|
||
"description-based:": "基于描述：",
|
||
"deselect all": "取消全选",
|
||
"Deselect visible tags": "取消选择可见标签",
|
||
"Destination directory": "目標目錄",
|
||
"Destination Directory": "目标文件夹",
|
||
"Dest Path": "目標路徑",
|
||
"detailed": null,
|
||
"Detailed": "详细设置",
|
||
"Detailed Save As": "详细保存为",
|
||
"Details": "详细设置",
|
||
"Detect from image": "從圖像偵測",
|
||
"Detect from Image": "从图像中提取",
|
||
"Detection": "检测",
|
||
"Detection model confidence threshold": "检测模型置信阈值",
|
||
"Detection model confidence threshold %": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 10th": "检测模型置信阈值",
|
||
"Detection model confidence threshold % 2nd": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 2nd": "检测模型置信阈值",
|
||
"Detection model confidence threshold % 3rd": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 3rd": "检测模型置信阈值",
|
||
"Detection model confidence threshold % 4th": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 4th": "检测模型置信阈值",
|
||
"Detection model confidence threshold % 5th": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 5th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 6th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 7th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 8th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 9th": "检测模型置信阈值",
|
||
"Detection threshold": "检测阈值",
|
||
"Determines how little respect the algorithm should have for image's content. At 0, nothing will change, and at 1 you'll get an unrelated image. With values below 1.0, processing will take less steps than the Sampling Steps slider specifies.": "決定演算法對圖像內容的影響程度。設定 0 時，什麼都不會改變，而在 1 時，你將獲得不相關的圖像。\n值低於 1.0 時，處理的疊代步數將少於「取樣疊代步數」滑桿指定的步數",
|
||
"deterministic": "確定",
|
||
"Deterministic": "確定性的訓練",
|
||
"det_size : Size of the detection area for face analysis. Higher values may improve quality but reduce speed. Low value may improve detection of very large face.": "det_size : 面部分析检测区域的大小。更高的数值可提高质量但降低速度。较低的数值可在改进非常大的面部的检测",
|
||
"det_thresh : Face Detection threshold": "det_thresh : 面部检测阈值",
|
||
"Device Info": "设备信息",
|
||
"Device precision type": "设备运行精度类型",
|
||
"difference": "差異化",
|
||
"Difference": "差分",
|
||
"diffusers default": "diffusers 默认",
|
||
"Diffusers LoRA loading variant": "Diffusers LoRA 加载变种",
|
||
"Diffusers model loading variant": "Diffusers 大模型加载变种",
|
||
"Diffusers pipeline": "Diffusers 管线",
|
||
"Diffusers Settings": "Diffusers 设置",
|
||
"Diffusers VAE loading variant": "Diffusers VAE 加载变种",
|
||
"Diffuse the first frame based on an image, similar to img2img.": "基于图像生成第一帧，类似于图生图",
|
||
"Diffusion Weights (training snapshots)": "Diffusion 权重 (训练快照)",
|
||
"digital": null,
|
||
"digital art": null,
|
||
"Digital Art": "Digital Art (数字艺术)",
|
||
"Dilation factor (B)": "扩张因子 (B)",
|
||
"Dimension lower bound": "維度下限",
|
||
"dimensions": "分辨率",
|
||
"Dimension upper bound": "維度上限",
|
||
"Directly Draw Scribbles": "直接绘制线稿",
|
||
"Directories": "目錄",
|
||
"directory.": "目录。",
|
||
"Directory for detected maps auto saving": "檢測圖的自動儲存目錄",
|
||
"Directory for saving images using the Save button": "使用「儲存」按鈕儲存圖像的目錄",
|
||
"Directory for saving init images when using img2img": "图生图初始图像的保存文件夹",
|
||
"Directory for temporary images; leave empty for default": "暫存影像的目錄；留空以使用預設值",
|
||
"(directory is hidden if its name starts with \".\")": "(如果目录的名称以 \".\" 开头, 就会被隐藏)",
|
||
"(directory is hidden if its name starts with \".\".)": "(如果目录的名称以 \".\" 开头, 就会被隐藏)",
|
||
"Directory name pattern": "目錄名稱格式",
|
||
"Directory path": "目錄路徑",
|
||
"Dirs": "Dirs (目录)",
|
||
"Disable": "禁用",
|
||
"Disable all extensions": "停用所有擴充功能",
|
||
"Disable all extensions (preserves the list of disabled extensions)": "禁用全部扩展 (保留原本已禁用扩展的列表)",
|
||
"Disable Async DNS for Aria2": "禁用 Aria2 的异步 DNS",
|
||
"Disable at the last loopback time": "最后一次回送时禁用",
|
||
"Disable built-in Lora handler": "停用内置 Lora 处理器",
|
||
"Disable Class Matching": "禁用类别匹配",
|
||
"Disable control type selection": "禁用控制类型筛选",
|
||
"disable convert 'AND' to 'BREAK'": "不再将 \"AND \"转换为 \"BREAK\"",
|
||
"disabled": "停用",
|
||
"Disabled": "已禁用",
|
||
"Disable de-duplication of wildcards before processing.": "处理前禁用通配符去重",
|
||
"Disable during hires pass": "在高分辨率修复过程中停用",
|
||
"Disable dynamic prompts by unchecking this box.": "取消勾選以停用動態提示詞",
|
||
"Disable feedback": "停止反馈",
|
||
"Disable for Negative prompt.": "为反向提示词禁用本插件效果",
|
||
"Disable function that you don't use": "禁用不想使用的功能",
|
||
"Disable image browser (Reload UI required)": "禁用 Cozy 图库浏览器 (需重启UI)",
|
||
"Disable image browser (requires reload UI)": "禁用 Cozy 图库浏览器 (需要重启)",
|
||
"Disable LCM": "禁用 LCM",
|
||
"Disable Logging": "禁用输出日志",
|
||
"Disable memmapping for loading .safetensors files.": "加载 .safetensors 文件时禁用内存映射",
|
||
"Disable openpose edit": "禁用 openpose 姿态编辑",
|
||
"Disable photopea edit": "禁用 photopea 线上编辑器",
|
||
"Disable postprocessing operations in extras tab": "在 “后期处理” 选项卡中禁用的后期处理的功能操作",
|
||
"Disable prompt token counters": "禁用提示词词元长度计数器",
|
||
"Disables logging (graphs), may cause minor performance improvements.": "禁用输出日志 (图表) ，也许能略微提升性能。",
|
||
"Disable sorting of wildcards before processing.": "处理前禁用通配符排序",
|
||
"Disable these extensions": "禁用这些扩展",
|
||
"(Disable this option if you're experiencing any issues with downloads.)": "(若在下载时遇到问题, 请禁用本选项)",
|
||
"(Disable this option if you're experiencing high CPU usage during video/gif playback)": "(若在视频或 GIF 播放过程中 CPU 占用过高, 请禁用本选项)",
|
||
"(disable to update the selected Gradio theme)": "(禁用以更新选中的 Gradio 主题)",
|
||
"(Disable to use the old download method)": "(禁用以使用旧下载方式)",
|
||
"Disable waves and gradiant background": "禁用波纹和背景渐变效果",
|
||
"Disable waves and gradiant background animations": "禁用波纹和背景渐变动画",
|
||
"Disallow usage of checkpoints in ckpt format": "不允许加载 ckpt 格式模型",
|
||
"Disallow usage of models in ckpt format": "不允许使用 ckpt 格式模型",
|
||
"discard": "丢弃",
|
||
"Discard": "丢弃",
|
||
"Discard images with low similarity or no faces :": "丢弃低相似度或不含面部的图像: ",
|
||
"Discard: remove style text from prompt, keep styles dropdown as it is.": "丢弃: 从提示词中删除对应预设样式文本, 并保持预设样式下拉菜单不变",
|
||
"Discard weights with matching name": "丟棄名稱相符的權重",
|
||
"Disco": "Disco (迪斯科)",
|
||
"discord server": " Discord 服务器",
|
||
"Discussion Board": "讨论板",
|
||
"Discussions": "討論串",
|
||
"👎 Dislike": "👎 不喜欢",
|
||
"Disliked images": "不喜欢的图片",
|
||
"👎 Dislikes": "👎 不喜欢的",
|
||
"display both english and target language": "同時顯示原文與翻譯",
|
||
"(displayed amount will depend on the actual browser window width)": "(实际显示数量取决于实际浏览器窗口宽度)",
|
||
"Display information dialog on Cozy Nest error": "显示 Cozy Nest 的信息对话框",
|
||
"Display loop number": "显示循环数量",
|
||
"Display loop number (0 = infinite loop)": "显示循环数 (0 = 无限循环)",
|
||
"Display mode:": "显示模式：",
|
||
"Display Name": "显示名称",
|
||
"Display name for this model": "此模型的顯示名稱",
|
||
"Disregard checkpoint information from pasted infotext": "忽略粘贴的生成信息文本中的 Stable Diffusion 模型信息",
|
||
"Disregard fields from pasted infotext": "忽略的粘贴板生成信息文本字段",
|
||
"dithering": "抖动 (dithering)",
|
||
"Divergence (3D effect)": "发散性（3D 效果）",
|
||
"Divide cards by date": "按日期划分卡片",
|
||
"Divide mode": "分割模式",
|
||
"Divide Ratio": "分割比率",
|
||
"Divisions": "分割",
|
||
"(do both conditional and unconditional denoising in one batch; uses a bit more VRAM during sampling, but improves speed; previously this was controlled by --always-batch-cond-uncond comandline argument)": "(在同一批次中同时进行正向与反向调整去噪；采样期间将使用更多显存，但会提高速度；过去由 --always-batch-cond-uncond 命令行参数控制)",
|
||
"(do both conditional and unconditional denoising in one batch; uses a bit more VRAM during sampling, but improves speed; previously this was controlled by --always-batch-cond-uncond commandline argument)": "(在单批次内进行条件去噪和无条件去噪; 迭代采样期间需要使用更多的显存，但能提高速度(由 \"--always-batch-cond-uncond\" 启动命令参数控制))",
|
||
"doc": "文档",
|
||
"Dolly": "希区柯克（推轨变焦）",
|
||
"Dominant image color": "圖像主色",
|
||
"Do not add watermark to images": "不在图像上添加水印",
|
||
"Do not append detectmap to output": "不要將檢測圖附加到輸出目錄",
|
||
"Do not apply ControlNet during highres fix": "高分辨率修复过程中不应用 ControlNet",
|
||
"Do not do anything special": "什麼都不做",
|
||
"Do not fix prompt schedule for second order samplers.": "不为二阶采样方法修复提示词作用时间",
|
||
"Do not make DPM++ SDE deterministic across different batch sizes.": "不要使 DPM++ SDE 在不同的批次大小之間具有確定性。",
|
||
"Do not optimize attention layers": "无优化",
|
||
"(do not recalculate conds from prompts if prompts have not changed since previous calculation)": "(如果提示词未更改，则不再重新从提示词计算调整参数)",
|
||
"(Do not recalculate conds from prompts if prompts have not changed since previous calculation)": "(若提示词自上次计算后未发生变化, 则不根据提示词重新调整计算)",
|
||
"Do not resize images": "不要調整影像大小",
|
||
"Do not save grids consisting of one picture": "只有一張圖片時不要儲存宮格圖",
|
||
"Do not save heatmap images": "不儲存熱度圖",
|
||
"Do not show any images in gallery": "不在画廊中显示任何图像",
|
||
"Do not show any images in results for web": "不在網頁的結果中顯示任何圖像",
|
||
"Do not store my preferences or SVG content locally": "不在本地保存设置和SVG图像",
|
||
"Do not upload here until bugfix": "在错误完全修复前不要在此处上传",
|
||
"] Do not use this option if you have made changes with the metadata editor without backing up your data!!": "] 若用元数据编辑器修改过元数据且未做备份的请勿使用此选项!!",
|
||
"Do not use this option if you have made changes with the metadata editor without backing up your data!!": "如果在未备份的情况下使用编辑器对元数据进行了更改，则不要勾选此选项！",
|
||
"Don't": "不要",
|
||
"Don't apply to negative prompts": "不用於反向提示詞。",
|
||
"Don't cache latents": "不缓存潜变量",
|
||
"Don't Cache Latents": "不缓存潜变量",
|
||
"don't delete upscaled imgs": "不删除放大前的图像",
|
||
"Don't generate images": "不產生圖像",
|
||
"Don't generate, only upscale": "不生成，仅放大",
|
||
"Don't Interrupt in the middle": "不中断生成中的图像",
|
||
"(Dont open with tilediffusion)": "(请勿和 Tiled Diffusion 同时开启)",
|
||
"Don't outfill": "不進行填充",
|
||
"Don't Override": "不覆盖",
|
||
"Don't re-scan for wildcard files when pressing the extra networks refresh button": "按下扩展模型刷新按钮时, 不重新扫描通配符文件",
|
||
"Don't use prompt magic on negative prompts.": "不要對反向提示詞使用提示詞魔法。",
|
||
"Don’t use wierd blocky upscale mode. Or maybe do?": "不要用 \"糟糕的分块放大模式\" ，或者也许可以试试？",
|
||
"dot size": "点大小",
|
||
"double-straight-line": "双直线",
|
||
"down": "下",
|
||
"Downcast model alphas_cumprod to fp16 before sampling. For reproducing old seeds.": "采样前将模型 alphas_cumprod 向下转换为 FP16, 用于复现旧的种子结果",
|
||
"Download": "下载",
|
||
"Download All files": "下载所有文件",
|
||
"Download configuration files from CivitAI": "从 CivitAI 下载配置文件",
|
||
"Download Example Images Locally": "在本地下载示例图像",
|
||
"Download folder:": "下载文件夹: ",
|
||
"Download Folder:": "下载文件夹: ",
|
||
"💾 Download image": "💾 下载图片",
|
||
"Download Link": "下载链接",
|
||
"Download localization template": "下載本地化模板",
|
||
"Download Max Size Preview": "下载最大尺寸预览图",
|
||
"Download missing activation triggers on startup": "启动时下载缺失的激活触发词",
|
||
"Download missing models upon reading generation parameters from prompt": "从生成参数中的提示词读取并下载缺失的模型",
|
||
"Download missing preview images on startup": "启动时下载缺失的模型预览图",
|
||
"Download model": "下载模型",
|
||
"Download Model": "下载模型",
|
||
"Download models using Aria2": "使用 Aria2 下载模型",
|
||
"Download NSFW (adult) preview images": "允许下载含成人内容的预览图",
|
||
"Download path": "下载路径",
|
||
"Download Queue": "下载队列",
|
||
"Downloads": "下载",
|
||
"Download system info": "下载系统信息",
|
||
"Download the pose as .json file": "以 .json 格式保存姿态图",
|
||
"Downscaling": "缩小",
|
||
"Drag Me": "拖动页面",
|
||
"Draw full canvas background": "绘制完整的画布背景",
|
||
"Drawing": "绘画",
|
||
"Drawing Canvas": "创建画布",
|
||
"Draw legend": "在圖表中包括軸類型和值",
|
||
"Draw Legends": "包含图例注释",
|
||
"Draw mask": "绘制蒙版",
|
||
"Draw region + show mask": "绘制区域和显示蒙版",
|
||
"Dreambooth": "Dreambooth",
|
||
"Dreamscape": "Dreamscape (梦境)",
|
||
"dropdown": "下拉式清單",
|
||
"Dropdown": "下拉式清單",
|
||
"Drop File Here": "拖曳檔案到此",
|
||
"Drop Image Here": "拖曳圖像到此",
|
||
"Drop out tags when creating prompts.": "在建立提示時刪除標籤",
|
||
"Drop tabs here to hide them": "把选项卡拖到此处隐藏它们",
|
||
"Drop Video Here": "拖曳影片到此",
|
||
"📝 Dry Run": "📝 试运行",
|
||
"Dry Run": "空運行",
|
||
"Due to ControlNet base extension's inner works it needs its models to be located at 'extensions/deforum-for-automatic1111-webui/models'. So copy, symlink or move them there until a more elegant solution is found. And, as of now, it requires use_init checked for the first run. The ControlNet extension version used in the dev process is a24089a62e70a7fae44b7bf35b51fd584dd55e25, if even with all the other options above used it still breaks, upgrade/downgrade your CN version to this one.": "因为 ControlNet 基层插件在内工作，所以需要将 ControlNet 模型置于 “extensions/deforum-for-automatic1111-webui/models”文件夹内。在更优雅的解决方法出现之前，请复制，软链接 symlink 或者移动模型。 \n同时目前为止，该插件需要在第一次运行时检查 use_init。\n用于开发进程的 ControlNet 插件版本为 a24089a62e70a7fae44b7bf35b51fd584dd55e25。如果全部按照上文使用还是损坏，请将 ControlNet 版本升级/降级到上述版本。",
|
||
"Due to the limitation of Segment Anything, when there are point prompts, at most 1 box prompt will be allowed; when there are multiple box prompts, no point prompts are allowed.": "由于Segment Anything的限制，当有标记点时，最多允许1个箱体标记；当有多个箱体提示时，不允许使用标记点。",
|
||
"duplicate": "重复的",
|
||
"Duplicate File Behavior": "重复文件行为",
|
||
"Duplicate Skeleton (X-axis)": "复制骨架(X 轴)",
|
||
"Duplicate Skeleton (Z-axis)": "复制骨架(Z 轴)",
|
||
"Duration": "持續時間",
|
||
"during the run sequence, only frames specified by this value will be extracted, saved, and diffused upon. A value of 1 indicates that every frame is to be accounted for. Values of 2 will use every other frame for the sequence. Higher values will skip that number of frames respectively.": "在运行序列期间，只有由该值指定的帧才会被提取、保存和生成。1表示要考虑全部帧。2表示每隔一帧用于序列。设置更较高的 N 值，每次提取将分别跳过 N 帧。",
|
||
"dw_openpose_full": "dw_openpose_full (二阶蒸馏 - 全身姿态估计)",
|
||
"Dynamic engines support a range of resolutions and batch sizes, at a small cost in performance. Wider ranges will use more VRAM.": "动态 (Dynamic) 引擎支持一个范围的分辨率和单批数量，以小量性能消耗为代价。更广的范围需要使用更多的显存。",
|
||
"Dynamic Image Normalization": "图像动态归一化",
|
||
"Dynamic Prompts enabled": "啟用動態提示詞",
|
||
"dynamicprompts library is version 0.29.0": "dynamic prompts 库的版本为: 0.29.0",
|
||
"Dystopian": "Dystopian (反乌托邦)",
|
||
"Each ControlNet unit for each image in a batch": "每张图像的每个 ControlNet 单元各处于一个批次",
|
||
"Each image is center-cropped with an automatically chosen width and height.": "每個圖像以自動選擇的寬度和高度為中心進行裁剪。",
|
||
"Each preset can be adjusted with the \"Advanced Settings\" option.": "所有预设均可在 \"高级设置\" 选项中调整。",
|
||
"Each Tags": "每个标签",
|
||
"(Early access models are only downloadable for supporter tier members)": "(抢鲜体验模型仅供支持者级的成员下载)",
|
||
"(Early access models are only downloadable for supporter tier members, Requires API key)": "(抢鲜体验模型仅供支持者级别的成员下载, 需要 API 密钥)",
|
||
"Early stopping parameter for CLIP model; 1 is stop at last layer as usual, 2 is stop at penultimate layer, etc.": "CLIP 模型的早期停止參數；1 是按照慣例在最後一層停止，2 是在倒數第二層停止，以此類推。",
|
||
"Easy editing": "简易编辑",
|
||
"EBSynth Mode": "EBSynth 模式",
|
||
"Ebsynth-Process": "Ebsynth-流程",
|
||
"EBSynth Settings": "Ebsynth 设置",
|
||
"[Ebsynth Utility]->[configuration]->[stage 2]->[Threshold of delta frame edge]": "[Ebsynth Utility]->[插件设置]->[步骤 2]->[关键帧间隔差异阈值]",
|
||
"edit": "编辑",
|
||
"Edit": "编辑",
|
||
"Edit Caption": "编辑描述",
|
||
"Edit Caption of Selected Image": "编辑被选图片的描述",
|
||
"Edit common tags.": "编辑常见标签",
|
||
"Edit Exif": "编辑 EXIF 信息",
|
||
"editing": "編輯",
|
||
"Editing Enabled": "啟用中繼資料編輯",
|
||
"Edit metadata": "编辑元数据",
|
||
"Edit Model Basic Data": "编辑模型基本数据",
|
||
"Edit Model Trigger Words": "编辑模型触发词",
|
||
"Edit Openpose": "编辑 Openpose",
|
||
"edit prompt words...": "编辑提示词...",
|
||
"edit prompt words... ": "编辑提示词...",
|
||
"Edit styles": "编辑预设样式",
|
||
"Edit SVG": "编辑 SVG",
|
||
"Edit Tags": "编辑标签 （Edit Tags）",
|
||
"Edit user metadata": "編輯使用者中繼資料",
|
||
"Edit workflow type": "编辑工作流类型",
|
||
"Effect": "效果器",
|
||
"Effective Block Analyzer": "高效区块分析器",
|
||
"(e.g. \"hair/colours/light/...\")": "(例如: \"hair/colors/light/...\")",
|
||
"Elemental": "组件",
|
||
"Elemental Merge": "组件合并",
|
||
"Elemental Merge, Adjust": "按模型组件合并, 调整",
|
||
"elements": "组件",
|
||
"EMA (nagetive)": "EMA (負)",
|
||
"ema-only": "仅保留 EMA 权重",
|
||
"EMA (positive)": "EMA (正)",
|
||
"Embedding": "嵌入",
|
||
"Embedding Learning rate": "嵌入學習率",
|
||
"Embedding: refresh": "嵌入式模型 (Embedding): 刷新",
|
||
"Embeddings: loaded": "嵌入式(Embeddings):已加载",
|
||
"Embeddings: skipped": "嵌入式(Embeddings):已跳过",
|
||
"Embed photo": "嵌入照片",
|
||
"Emphasis mode": "强调模式",
|
||
"Emphasis: use (text) to make model pay more attention to text and [text] to make it pay less attention": "强调符：使用 (文字) 使模型更关注该文本，使用 [文字] 减少其关注度",
|
||
"empty cannot be saved": "留空时无法保存",
|
||
"empty strings cannot be translated": "无法翻译空的文本",
|
||
"Enable": "啟用",
|
||
"Enable AA for Downscaling.": "缩小时使用抗锯齿",
|
||
"Enable AA for Upscaling.": "放大时使用抗锯齿",
|
||
"Enable ADetailer": "启用 After Detailer",
|
||
"Enable Ancestral ETA scheduling": "启用 Ancestral 采样方法 ETA 调度",
|
||
"Enable AnimateDiff": "启用 AnimateDiff",
|
||
"Enable Anti Burn (and everything)": "启用 Anti Burn",
|
||
"Enable Autocomplete": "启用标签自动补全",
|
||
"Enable Autopruning": "启用自动修剪",
|
||
"Enable batch mode": "启用批处理模式",
|
||
"Enable Bilingual Localization": "啟用雙語翻譯對照",
|
||
"Enable CFG-Based guidance": "启用基于 CFG 的引导 (CFG-Based guidance)",
|
||
"Enable checkpoint scheduling": "启用模型调度计划",
|
||
"Enable clear gallery button in txt2img and img2img tabs": "在文生图和图生图标签页中启用清除图片输出栏按钮",
|
||
"Enable CLIP skip scheduling": "启用 CLIP 终止层数调度",
|
||
"Enable color correction": "启用颜色校正",
|
||
"Enable comments": "启用注释",
|
||
"Enable Control": "启用控制",
|
||
"Enable controlnet tile resample": "启用 ControlNet 的 tile resample (分块 - 重采样)",
|
||
"enabled": "启用",
|
||
"Enabled": "啟用",
|
||
"Enable Dev mode - adds extra reporting in console": "启用开发者模式 - 在控制台中打印额外回报信息",
|
||
"Enable Devtools Log": "启用开发工具日志",
|
||
"Enable during hires. fix": "在高分辨率修复过程中启用",
|
||
"Enable Dynamic Thresholding (CFG Scale Fix)": "启用动态阈值 (CFG Scale 修复)",
|
||
"Enable emphasis": "启用强调符",
|
||
"Enable extension": "启用插件",
|
||
"Enable extra network tweaks": "启用扩展网络修改",
|
||
"Enable extras": "打开 ▼",
|
||
"Enable Face Prompt": "启用脸部提示词",
|
||
"Enable feedback during hires. fix": "在高清修复过程中应用反馈",
|
||
"Enable for SDXL": "对 SDXL 模型启用",
|
||
"enable for seamless-tiling of each generated image. Experimental": "启用以使得每个生成的图像都能实现无缝拼接 (实验性)",
|
||
"Enable full page image viewer": "啟用整頁圖像檢視器",
|
||
"Enable gif/video playback in the browser": "启用在浏览器内的 GIF 和视频的播放",
|
||
"Enable GroundingDINO": "启用 GroundingDINO",
|
||
"Enable guided images mode": "启用图像引导模式",
|
||
"Enable Hires. fix+": "启用高分修复PLUS",
|
||
"Enable Hypertile U-Net": "启用 Hypertile U-Net",
|
||
"Enable Hypertile U-Net for hires fix second pass": "对高分辨率修复层启用 Hypertile U-Net",
|
||
"Enable Hypertile VAE": "启用 Hypertile VAE",
|
||
"Enable IPEX Optimize for Intel GPUs": "为 Intel GPU 启用 IPEX 优化",
|
||
"Enable JavaScript aspect ratio controls": "启用前端纵横比控制",
|
||
"Enable Jinja2 templates": "啟用 Jinja2 模板",
|
||
"Enable Maintenance tab": "启用 \"维护\" 选项卡",
|
||
"Enable model compile (experimental)": "启用模型编译优化（实验性）",
|
||
"Enable Model Mixer": "启用模型混合",
|
||
"Enable MultiDiffusion": "启用 MultiDiffusion",
|
||
"Enable neutral-prompt extension": "启用 Neutral Prompt 扩展",
|
||
"Enable Noise Inversion": "启用噪声反转",
|
||
"Enable noise multiplier scheduling": "启用噪声倍率调度",
|
||
"Enable optimized monocular depth estimation": "启用单色深度估算优化 (optimized monocular depth estimation)",
|
||
"Enable Or Disable Style Selector": "启用或禁用样式选择器",
|
||
"Enable overwrite": "允许覆盖",
|
||
"Enable perspective flip": "启用透视翻转",
|
||
"Enable pixelization": "啟用像素化",
|
||
"Enable Pixel Perfect from lllyasviel. Configure your target width and height on txt2img/img2img default panel before preview if you wish to enable pixel perfect.": "启用 lllyasviel 的完美像素模式。在预览前，请在文生图/图生图界面配置好图像的目标宽度和高度。",
|
||
"Enable postprocessing operations in txt2img and img2img tabs": "啟用文生圖和圖生圖選項卡中的後處理操作",
|
||
"Enable quantization in K samplers for sharper and cleaner results": "对 K 采样方法启用量化以获得更清晰、干净的结果",
|
||
"Enable quantization in K samplers for sharper and cleaner results. This may change existing seeds": "对 K-diffusion 采样方法启用量化以获得更清晰、干净的结果。这可能会改变现有的随机种子",
|
||
"Enable quantization in K samplers for sharper and cleaner results. This may change existing seeds. Requires restart to apply.": "在 K 取樣器中啟用量化以獲得更清晰，乾淨的結果。這可能會改變現有的隨機種子。需要儲存設定並重新啟動才能套用",
|
||
"Enable Randomize extension": "启用随机化扩展",
|
||
"Enable Refiner": "启用 Refiner",
|
||
"Enable Region 1": "启用区域 1",
|
||
"Enable Region 2": "启用区域 2",
|
||
"Enable Region 3": "启用区域 3",
|
||
"Enable Region 4": "启用区域 4",
|
||
"Enable Region 5": "启用区域 5",
|
||
"Enable Region 6": "启用区域 6",
|
||
"Enable Region 7": "启用区域 7",
|
||
"Enable Region 8": "启用区域 8",
|
||
"enables 2D mode functions to simulate faux 3D movement": "启用 2D 模式的功能来仿照模拟 3D 运动",
|
||
"Enable sampler scheduling": "啟用取樣器排程",
|
||
"Enable sd-webui-comfyui extension": "启用 sd-webui-comfyui 扩展",
|
||
"(enables hypertile for all modes, including hires fix second pass; noticeable change in details of the generated picture)": "(为所有模型启用 Hypertile, 包括高分辨率修复层; 生成图像的细节会有明显变化)",
|
||
"(enables hypertile just for hires fix second pass - regardless of whether the above setting is enabled)": "(仅对高分辨率修复层启用 Hypertile - 无论是否启用上述选项)",
|
||
"Enable steps scheduling": "启用迭代步数调度计划",
|
||
"Enables the Extra Networks directory tree view by default": "默认启用扩展模型树状目录视图",
|
||
"(enable stochasticity; start value of the sigma range; only applies to Euler, Heun, and DPM2)": "(启用随机流失率; sigma 波动范围的最低值; 仅作用于 Euler, Heun, 和 DPM2 采样方法)",
|
||
"Enable Style Selector": "启用样式选择器",
|
||
"enable Style Selector by default": "默认启用样式选择器",
|
||
"Enable Subseed scheduling": "启用第二种子调度计划",
|
||
"Enable Tag Autocompletion": "啟用標記自動補齊",
|
||
"Enable tensorboard logging": "启用 Tensorboard 日志记录",
|
||
"Enable tensorboard logging.": "啟用 TensorBoard 日誌記錄。",
|
||
"Enable this to generate model with fp16 precision. Results in a smaller checkpoint with minimal loss in quality.": "启用本选项可生成 fp16 精度的模型。缩小模型体积的同时尽量把质量损失降到最低。",
|
||
"Enable this to save VRAM.": "启用此项以节省显存 (VRAM)。",
|
||
"Enable thumbnail tooltips": "启用缩略图工具提示",
|
||
"Enable Tiled Diffusion": "启用 Tiled Diffusion",
|
||
"Enable Tiled VAE": "启用 Tiled VAE",
|
||
"Enable Token Merging (faster, less VRAM, less accurate)": "启用 Token 合并 (更快，使用更少显存，精确度降低)",
|
||
"Enable tooltip on the canvas": "启用画布上的工具列提示框",
|
||
"Enable to Store file in object storage that supports the s3 protocol": "将文件保存到支持 S3 协议的对象存储",
|
||
"enable to trigger webui's face restoration on each frame during the generation": "启用以在每一帧生成过程中触发 webui 的面部修复功能",
|
||
"Enable Tree View": "启用树状视图",
|
||
"Enable uploading manually created mask to SAM.": "启用手动上传蒙版到 SAM。",
|
||
"Enable upscale with extras": "启用后期处理放大",
|
||
"Enable Vectorizing": "启用矢量化",
|
||
"Enable webcam": "开启网络摄像头",
|
||
"Enable/When": "启用/时机",
|
||
"Enabling this will provide better results and editability, but cost more VRAM.": "启用此功能将提供更好的结果和可编辑性，但会消耗更多显存。",
|
||
"Enabling this will save the EMA unet weights as the 'normal' model weights and ignore the regular unet weights.": "启用本选项会把 EMA U-Net 权重作为 “正常” 模型的权重保存，并且会无视常规 U-Net 权重。",
|
||
"Encoder Color Fix": "編碼器顏色修復",
|
||
"Encoder Tile Size": "編碼器分塊尺寸",
|
||
"end at this step": "在此疊代步數停止",
|
||
"End blur width": "结束模糊宽度",
|
||
"End generation immediately or after completing current batch": "立即或在完成当前批次后结束生成",
|
||
"Ending Control Step": "停止控制步數(%)",
|
||
"Ending Control Step schedule": "结束引导时机调度计划",
|
||
"End of prompt": "提示词后",
|
||
"End Page": "尾頁",
|
||
"end the animation at this frame number": "达成此帧数后停止生成",
|
||
"Engages hybrid compositing of video into animation in various ways with comp alpha as a master mix control.": "使用多种方式参与视频转动画的合成过程, 以合成透明度作为主要方式控制混合",
|
||
"Engine": "引擎",
|
||
"Enhance": "Enhance (增强)",
|
||
"Enhanced img2img": "Enhanced img2img (图生图增强)",
|
||
"Enlarge the brush size": "放大画笔",
|
||
"Enqueue": "排队",
|
||
"(ENSD; does not improve anything, just produces different results for ancestral samplers - only useful for reproducing images)": "(ENSD: 对图像质量无任何提升, 只为 Ancestral 采样方法产生不同的结果 - 仅对复现图像有用)",
|
||
"Enter a model name for saving checkpoints and lora models.": "輸入模型名稱以保存檢查點和 lora 模型。",
|
||
"enter any additional notes": "输入任何附加注意事项",
|
||
"Enter categody ids, separated by +. For example, if you want bed+person, your input should be 7+12 for ade20k and 59+0 for coco.": "在此输入类别 ID，用 + 分隔。例如，如果你想分割出 床 + 人，使用ade20k协议应该输入 7 + 12，使用coco协议应该输入 59 + 0。",
|
||
"Enter category IDs": "输入类别ID",
|
||
"Enter file name to save": "输入要保存的文件名",
|
||
"Enter hypernetwork Dropout structure (or empty). Recommended : 0~0.35 incrementing sequence: 0, 0.05, 0.15": "輸入 Hypernetwork Dropout 結構（或空）。推薦：0~0.35 的遞增序列：0、0.05、0.15",
|
||
"Enter hypernetwork layer structure": "輸入超網路（Hypernetwork）層結構",
|
||
"Enter input path": "填写输入目录",
|
||
"Enter output path": "填写输出目录",
|
||
"Enter prompt here": "在此处输入提示词",
|
||
"Enter prompts (one line for one trigger words)": "输入提示词（一行一个触发词）",
|
||
"Enter relative to webui folder or Full-Absolute path, and make sure it ends with something like this: '20230124234916_%09d.png', just replace 20230124234916 with your batch ID. The %05d is important, don't forget it!": "输入绝对路径或者以 webui 为根目录的相对路径，同时确认路径结尾类似“20230124234916_%09d.png”。只需要将 20230124234916 替换为你的 batch ID。“%05d”很重要，别忘了！",
|
||
"Enter relative to webui folder or Full-Absolute path, and make sure it ends with something like this: '20230124234916_%09d.png', just replace 20230124234916 with your batch ID. The %09d is important, don't forget it!": "输入相对于 webui 文件夹的路径或者绝对路径，并确保图片以这样的名称为后缀: '20230124234916_%09d.png'，用批次名称替换 20230124234916 即可。别忘了 ％09d ，它很重要!",
|
||
"Enter the path to a txt file containing sample prompts.": "輸入包含樣本提示的 txt 檔案的路徑。",
|
||
"enter username for submission": "输入用户名以提交",
|
||
"Enter your custom name.": "输入自定义名称",
|
||
"Enter your prompt word (trigger word/prompt/negative prompt)": "输入你的提示词（触发词/提示词/反向提示词）",
|
||
"Enter your trigger word. EX: character_name_(title of novel)": "输入触发词。例如：character_name_\\(title of novel\\)",
|
||
"Entire Caption": "整个描述",
|
||
"Epochs to Simulate": "要模擬的訓練週期",
|
||
"Equirectangular projection": "等距柱状投影图",
|
||
"Erase BG": "移除背景图",
|
||
"error": "错误",
|
||
"Error": "錯誤",
|
||
"Error Correction Level": "纠错等级",
|
||
"Error threshold": "誤差閾值",
|
||
"Escape brackets": "将结果中的括号进行转义处理",
|
||
"Escape parentheses on insertion": "插入時轉義括號",
|
||
"Eta for ancestral samplers": "Ancestral 采样方法的 η 系数",
|
||
"Eta for DDIM": "DDIM 采样方法的 Eta 系数",
|
||
"Eta for k-diffusion samplers": "k-diffusion 采样方法的 Eta 系数",
|
||
"eta (noise multiplier) for ancestral samplers": "Ancestral 采样方法的 Eta (噪声倍率)",
|
||
"eta (noise multiplier) for DDIM": "DDIM 的 Eta (噪声倍率) ",
|
||
"Eta noise seed delta": "Eta 噪點種子偏移（ENSD）",
|
||
"etc": "其他",
|
||
"Euler Ancestral - very creative, each can get a completely different picture depending on step count, setting steps higher than 30-40 does not help": "Euler Ancestral - 非常具創意，每個人都可以根據步數獲得完全不同的圖片，將步數設定高於 30-40 並沒有太大幫助",
|
||
"Every prompt in Batch Will Have Random Style": "每个生成批次都会随机应用提示词",
|
||
"EX: ": "例如：",
|
||
"ex A.": "例 A：",
|
||
"Examine the instance and class images and report any instance images without corresponding class images.": "检查实例和类别图像，并回报任何没有相应类别图像的实例图像。",
|
||
"Example: Default args should use 221 as the total keyframes.": "示例：默认参数下应设置 221 作为关键帧总数",
|
||
"Example: Default args should use 221 as total keyframes.": "示例：默认参数应使用 221 作为总关键帧数。",
|
||
"Example flow:": "工作流示例: ",
|
||
"Examples": "例子",
|
||
"Example: seed_schedule could use 0:(5), 1:(-1), 219:(-1), 220:(5)": "示例：种子调度计划可以这么填写 0:(5), 1:(-1), 219:(-1), 220:(5)",
|
||
"Example: seed_schedule could use 0:(s), 1:(-1), \"max_f-2\":(-1), \"max_f-1\":(s)": "示例：种子调度计划可以设置为 0:(s), 1:(-1), \"max_f-2\":(-1), \"max_f-1\":(s)",
|
||
"Example: strength_schedule could use 0:(0.25 * cos((72 / 60 * 3.141 * (t + 0) / 30))**13 + 0.7) to make alternating changes each 30 frames": "示例：强度调度计划可以设置为 0:(0.25 * cos((72 / 60 * 3.141 * (t + 0) / 30))**13 + 0.7) 来使强度在每过 30 帧交替一次变化",
|
||
"ex B.": "例 B：",
|
||
"ex C.": "例 C：",
|
||
"Excluded Tag confidences": "排除标签置信度",
|
||
"Excluded tags": "排除标签",
|
||
"Exclude tag, ..": "排除标签, ..",
|
||
"Exclude tags (split by comma)": "排除标签 (逗号分隔)",
|
||
"Exclude Target (e.g., finger, book)": "排除目标（如 finger, book）",
|
||
"exclusion": "排除",
|
||
"Excudes (split by comma)": "排除 (逗号分隔)",
|
||
"exif_data": "EXIF 数据",
|
||
"exif keyword": "exif 關鍵字",
|
||
"EXIF keyword search": "EXIF 关键词搜索",
|
||
"Existing Caption txt Action": "對現有的文字文件進行描述文字的動作",
|
||
"Exit ⭕": "退出",
|
||
"Expand accordion by default": "默认展开手风琴 UI",
|
||
"Expanded Mask": "扩展后蒙版",
|
||
"Expand Mask": "展开蒙版设置",
|
||
"Expand Mask Iterations": "拓展蒙版迭代数",
|
||
"Expand mask region": "展开蒙版区域",
|
||
"(Experimental, keep cond caches across jobs, reduce overhead.)": "(实验性功能；在不同任务中保留缓存以减少开销)",
|
||
"EXPERIMENTAL: LoRA Shared Diffusers Source": "实验性: 共享 LoRA Diffusers 来源",
|
||
"Experimental Settings": "實驗性設定",
|
||
"Experimental Shared Source:": "实验性共享来源:",
|
||
"Experimental Shared Src": "实验性共享来源",
|
||
"Explanation of Each Parameter": "参数解释",
|
||
"Export": "导出",
|
||
"Export Default Engine": "导出默认引擎",
|
||
"Exported Text": "输出文本",
|
||
"Export Engine": "导出引擎",
|
||
"Export type": "输出类型",
|
||
"ExposureOffset": "曝光偏移",
|
||
"expressionism": null,
|
||
"extcrop": "裁剪后扩展",
|
||
"Extended prompt guide (jp)": "扩展提示词指南 (日语)",
|
||
"Extension": "擴充功能",
|
||
"Extension index URL": "擴充列表網址",
|
||
"extensions": "扩展",
|
||
"Extensions": "擴充功能",
|
||
"Extension State": "扩展状态",
|
||
"extension to be installed.": " 插件",
|
||
"extension to be installed, but will work with it disabled.)": " 扩展, 但本选项功能可以在其禁用时生效)",
|
||
"Extension version": "擴充功能版本",
|
||
"extensive": "大量",
|
||
"extfull": "填充至完整",
|
||
"extra": "額外的",
|
||
"Extra": "▼",
|
||
"Extra args": "額外參數",
|
||
"Extra arguments": "额外参数",
|
||
"Extra arguments for trtexec command in plain text form": "以纯文本形式填写用于 trtexec 命令的额外参数",
|
||
"Extra .cni file": "单独的 .cni 文件",
|
||
"Extract": "提取",
|
||
"Extract all faces from a batch of images. Will apply enhancement in the tools enhancement tab.": "从批量图像中提取所有面部。会应用在 ”工具 --> 增强“ 标签页中设置的增强功能",
|
||
"Extract EMA Weights": "提取 EMA 權重",
|
||
"Extract frames from the original video.": "将原始视频转换为帧序列。",
|
||
"Extract from frame": "提取开始帧",
|
||
"Extract nth frame": "每 N 帧提取一次",
|
||
"Extract to frame": "提取结束帧",
|
||
"Extract U-Net features": "提取 U-Net 特征值",
|
||
"Extra filename": "额外文件名",
|
||
"Extra filename (for small sets of custom tags)": "追加標記檔檔名（用於小型的自定義標記集）",
|
||
"Extra generation params": "附加生成參數",
|
||
"Extra network card height": "扩展模型卡片高度",
|
||
"Extra network card width": "扩展模型卡片宽度",
|
||
"Extra Networks": "額外網路",
|
||
"Extra Networks directory view style": "扩展模型目录视图样式",
|
||
"Extra networks separator": "扩展模型分隔文本",
|
||
"Extra networks tab order": "額外網絡標籤順序",
|
||
"Extra noise multiplier for img2img and hires fix": "图生图和高分辨率修复的额外噪声倍率",
|
||
"Extra paths to scan for LoRA models, comma-separated. Paths containing commas must be enclosed in double quotes. In the path, \" (one quote) must be replaced by \"\" (two quotes).": "掃描 LoRA模型的額外目錄，以逗號分隔。包含逗號的路徑必須用雙引號括起來。在路徑中，一個引號「\"」必須替換為「\"\"」兩個引號。",
|
||
"Extra path to scan for ControlNet models (e.g. training output directory)": "掃描 ControlNet 模型的額外路徑（例如訓練輸出目錄）",
|
||
"extras": "附加功能",
|
||
"Extras": "附加功能",
|
||
"Extra steps": "额外迭代步数",
|
||
"(extra text to add before <...> when adding extra network to prompt)": "(添加扩展模型到提示词时, 在 <...> 之前添加的额外文本)",
|
||
"Extra text to add before <...> when adding extra network to prompt": "在向提示词中添加扩展模型标签时在 <…> 之前添加额外文本",
|
||
"Extremely slow (OpenCV + FaceMesh)": "极慢 (OpenCV + FaceMesh)",
|
||
"Face": "脸部",
|
||
"Face Area Magnification": "脸部区域扩展",
|
||
"Face checkpoint built with the checkpoint builder in tools. Will overwrite reference image.": "使用模型构建工具创建的面部模型。会覆盖参考图像",
|
||
"Face Checkpoint (precedence over reference face)": "面部模型 (优先于参考图像脸部)",
|
||
"Face Crop option": "脸部修复选项",
|
||
"Face Crop Resolution": "脸部修复分辨率",
|
||
"Face Denoising Strength": "脸部去噪强度",
|
||
"Face detection confidence": "脸部识别强度",
|
||
"Face Detection Method": "人脸识别算法",
|
||
"Face Editor": "Face Editor",
|
||
"Face margin": "脸部区域大小",
|
||
"face model resolution": "脸部模型分辨率",
|
||
"Face restoration": "面部修復",
|
||
"Face restoration model": "面部修复模型",
|
||
"Face Restore Model": "面部修復模型",
|
||
"FaceSwapLab FaceSwap Model": "FaceSwapLab FaceSwap 模型",
|
||
"Fairy Tale": "Fairy Tale ( 童话)",
|
||
"Fall-off exponent (lower=higher detail)": "衰減指數（越小細節越好）",
|
||
"False": "否",
|
||
"fantasy": null,
|
||
"Fantasy Art": "Fantasy Art (奇幻艺术)",
|
||
"Far clip": "遠處裁面",
|
||
"Far schedule": "远处裁面距离调度计划",
|
||
"fashion": null,
|
||
"fast": "快速",
|
||
"Fast Decoder": "快速解碼器",
|
||
"Fast Encoder": "快速編碼器",
|
||
"Fast Encoder Color Fix": "快速编码器颜色修复",
|
||
"Fast Encoder may change colors; Can fix it with more RAM and lower speed.": "快速編碼器會導致顏色變更；可以使用更多記憶體與時間來修復。",
|
||
"faster": "稍快",
|
||
"Fast PNG Info": "快速 PNG 信息",
|
||
"Fast PNG Info ⚡": "⚡ 快速提取 PNG 图片信息 ⚡",
|
||
"fauvism": null,
|
||
"favorites": "收藏夹",
|
||
"Favorites": "收藏夾",
|
||
"Favorites path from settings: log/images": "从设置中获取收藏夹路径: log/images",
|
||
"Fax": "传真",
|
||
"Feedback end": "反馈终止时机",
|
||
"Feedback start": "反馈介入时机",
|
||
"Feedback Strength": "反馈强度",
|
||
"FEMALE": "女性",
|
||
"Fetch output folder from a1111 settings (Reload needed to enable)": "从 webui 设置中获取输出文件夹 (需重载以启用)",
|
||
"Fetch previews for existing models": "获取本地模型预览图",
|
||
"ffmpeg binary. Only set this if it fails otherwise.": "FFMPEG二进制。 只有在其他情况下失败时才设置这个。",
|
||
"FFmpeg CRF value": "FFmpeg CRF 值",
|
||
"FFmpeg path/ location": "FFmpeg 路径",
|
||
"FFmpeg Preset": "FFmpeg 预设",
|
||
"FFmpeg settings": "FFmpeg 设置",
|
||
"Fields managed in your Parseq manifest override the values and schedules set in other parts of this UI. You can select which values to override by using the \"Managed Fields\" section in Parseq.": "参数定序器清单中管理的字段会覆盖本用户界面其他部分设置的值和调度计划。可以通过参数定序器中的 \" 管理字段 (Managed Fields)\"选择要覆盖的值",
|
||
"Fighting Game": "Fighting Game (格斗游戏)",
|
||
"figurativism": null,
|
||
"File": "檔案",
|
||
"File:": "文件: ",
|
||
"File editor": "檔案編輯器",
|
||
"File extensions": "文件扩展名",
|
||
"File format for grids": "宮格圖的檔案格式",
|
||
"File format for images": "圖像的檔案格式",
|
||
"file_from": "源文件名",
|
||
"file_name": "文件名",
|
||
"filename": "文件名",
|
||
"Filename": "文件名",
|
||
"Filename:": "文件名: ",
|
||
"File Name": "檔案名",
|
||
"Filename join string": "檔案名連接用字串",
|
||
"Filename keyword search": "文件名关键词搜索",
|
||
"Filename of auto save model": "自动保存模型文件名",
|
||
"filename(option)": "文件名 (可选)",
|
||
"File name or path": "文件名或路径",
|
||
"Filename word regex": "檔案名用詞的正則表達式",
|
||
"Filepath:": "文件路径：",
|
||
"Files in the output directory may be overwritten.": "输出目录中的文件可能会被覆盖。",
|
||
"File size:": "文件大小:",
|
||
"File size limit for the above option, MB": "檔案容量上限（MB）",
|
||
"Files to process": "要处理的文件",
|
||
"File system": "文件系统",
|
||
"file_to": "目标仓库",
|
||
"File type": "文件类型",
|
||
"Filewords": "風格 / 物品名稱",
|
||
"fill": "填充",
|
||
"fill down": "向下扩展",
|
||
"fill it with colors of the image": "用圖像的顏色（高強度模糊）填充它",
|
||
"fill it with latent space noise": "以潛在變數空間噪點填充",
|
||
"fill it with latent space zeroes": "以潛在變數填零填充",
|
||
"fill left": "向左扩展",
|
||
"fill right": "向右扩展",
|
||
"fill up": "向上扩展",
|
||
"Fill value used when Padding is set to constant": "填充模式设置为常量时的填充数值",
|
||
"Film Noir": "Film Noir (黑色电影)",
|
||
"Filter base model:": "底模筛选: ",
|
||
"Filter Base Model:": "底模筛选: ",
|
||
"Filter by Selection": "通过选择过滤",
|
||
"Filter by Tags": "通过标签过滤",
|
||
"Filter files": "过滤文件",
|
||
"Filter Images": "过滤图片",
|
||
"Filter Images by Tags": "通过标签过滤图片",
|
||
"filter item": "筛选项",
|
||
"Filter Logic": "过滤逻辑",
|
||
"Filter models by path name": "模型列表將僅顯示此路徑下的模型",
|
||
"Filter NSFW content": "过滤成人内容 (NSFW)",
|
||
"Filter out following properties (comma seperated). Example film grain, purple, cat": "过滤以下提示词包含的属性 (逗号分隔). 例如: film grain, purple, cat",
|
||
"filter value": "筛选值",
|
||
"Filter values": "筛选值",
|
||
"Final denoising strength": "最終重繪幅度",
|
||
"Find and manage wildcards in the Wildcards Manager tab.": "在萬用字元管理器分頁中尋找並管理萬用字元",
|
||
"find but bo translated:": "已找到但无翻译：",
|
||
"Find more settings on the": "尋找更多設定請前往",
|
||
"Find your cozy spot on Auto1111's webui": "探寻 Auto1111 webui 最舒适的使用方式",
|
||
"First": "First (第一生成帧)",
|
||
"First face of batches sources will be extracted and used as input (or blended if blend is activated).": "批量图像源的第一个面部将作为输入 (或激活混合功能时进行混合)",
|
||
"First frame as init image": "第一帧作为初始化图像",
|
||
"first frame of img2img result": "图生图结果的第一帧",
|
||
"FirstGen": "FirstGen (处理后生成的第一帧)",
|
||
"First inference involves compilation of the model for best performance.": "第一次推理会编译模型以获得最佳性能",
|
||
"First Name": "名字",
|
||
"First Page": "首頁",
|
||
"first pass": "第一层",
|
||
"Firstpass height": "首次生成高度",
|
||
"Firstpass width": "首次生成宽度",
|
||
"First upscaler": "第一放大方法",
|
||
"Fit video length": "适配视频长度",
|
||
"Fix broken CLIP position IDs": "修复损坏的 Clip position ID",
|
||
"Fix clip": "修复 CLIP",
|
||
"fixed": "固定",
|
||
"Fixed seed": "固定隨機種子",
|
||
"(fixes very slow loading speed in some cases)": "(修复某些情况下加载速度非常慢的问题)",
|
||
"Flat Papercut": "Flat Papercut (平面剪纸)",
|
||
"Flip": "翻转",
|
||
"Flow consistency mask": "光流一致性蒙版",
|
||
"Flow factor schedule": "光流系数调度计划",
|
||
"Flow method": "光流算法",
|
||
"Focal point edges weight": "焦點線條權重",
|
||
"Focal point entropy weight": "焦點熵權重",
|
||
"Focal point face weight": "焦點面部權重",
|
||
"folder_from": "源文件夹",
|
||
"Folder name where output images will be saved": "输出图像的文件夹保存名称",
|
||
"folder_to": "目标仓库",
|
||
"Folder to Save Generation Images": "用于保存生成图像的文件夹",
|
||
"Follow installation instructions here": "请跟随此处的安装指引",
|
||
"Font color": "字体颜色",
|
||
"Font for image grids that have text": "有文字的宮格圖使用的字體",
|
||
"Font size": "字体大小",
|
||
"Food Photography": "Food Photography (食品摄影)",
|
||
"Foot Size": "脚掌尺寸",
|
||
"For -1 seed, all frames in a GIF have common seed": "GIF 中所有帧共用一个随机种子",
|
||
"For accurate performance measurements, it is recommended to exclude this slower first inference, as it doesn't reflect normal running time.": "若需要准确测量性能, 建议排除较慢的第一次推理, 因为其不能反映正常的运行时间",
|
||
"for ade20k and": "来获得 ade20k 类别, 查看",
|
||
"For advanced keyframing with Math functions, see": "若欲進階使用數學函數進行關鍵幀動畫，請參考：",
|
||
"For advanced users, you can create a permanent file in OneButtonPromptuserfiles called antilist.csv": "对于专业用户，可以在 \\OneButtonPrompt\\userfiles\\ 中创建一个永久文件，命名为 antilist.csv",
|
||
"for backward compatibility. uses the formula: `width/height`": "为了向后兼容性。请使用以下格式: `宽度/高度`",
|
||
"For best prompts with Stable Diffusion 1.* choose the": "要获得 Stable Diffusion 1.x 的最佳提示词，请选择 ",
|
||
"For best prompts with Stable Diffusion 2.* choose the": "要获得 Stable Diffusion 2.x 的最佳提示词，请选择 ",
|
||
"Forbid URLs to local resources": "不允许通过 URL 连接访问本地资源",
|
||
"force all frames to be in grayscale": "强制所有帧图像为灰度",
|
||
"Force convert half to float on interpolation (for some platforms)": "在插值时强制将半精度浮点数转换为全精度 (适用于部分平台)",
|
||
"Force CPU (Requires Custom Script Reload)": "強制使用 CPU（需要重新加載自定義腳本）",
|
||
"Force image gallery to use temporary files": "强制图库使用临时文件",
|
||
"Force Rebuild.": "强制重新构建",
|
||
"Force Reset": "强制重置",
|
||
"Force touch mode": "强制触摸模式",
|
||
"for coco to get category->id map. Note that coco jumps some numbers, so the actual ID is line_number - 21.": "来获得 coco 的类别 -> id 映射。需注意: coco 会跳过部分数字，所以实际 ID 应该是 “划定数字 - 21 (line_number - 21)”",
|
||
"for depth map.": "获取深度图更多信息",
|
||
"for detailed explanation.": "以了解詳細說明",
|
||
"Forearm": "前臂长度",
|
||
"Foreground": "前景",
|
||
"Foreground Transparency": "前景透明度",
|
||
"for explanation of each parameter. If you still cannot understand, use default.": "以了解每个参数的含义。如果仍不理解，请保持默认。",
|
||
"FOR HELP CLICK HERE": "需要幫助請點擊這裡",
|
||
"For hires fix, calculate conds of second pass using extra networks of first pass.": "对高清修复使用第一层的扩展网络来为第二层计算条件",
|
||
"For hires fix, use width/height sliders to set final resolution rather than first pass (disables Upscale by, Resize width/height to).": "對於 hires fix，使用寬度/高度滑桿設定最終解析度，而不是第一遍（停用放大比例、調整寬度/高度）",
|
||
"for how many frames the same seed should stick before iterating to the next one": "在迭代到下一个新种子之前该种子应使用多少帧",
|
||
"For image processing do exactly the amount of steps as specified": "在进行图片处理时，准确执行滑块所指定的迭代步数",
|
||
"For inpainting, include masked composite in results for web": "對於局部重繪，將遮罩合成包含在網頁結果中。",
|
||
"For inpainting, include the greyscale mask in results for web": "對於局部重繪，將灰度遮罩包含在網頁結果中",
|
||
"For inpainting, save a copy of the greyscale mask": "對於局部重繪，保存一份灰度遮罩的副本。",
|
||
"For inpainting, save a masked composite": "對於修補，保存一個遮罩合成圖像。",
|
||
"Format": "格式",
|
||
"format: http://127.0.0.1:port": "格式: http://127.0.0.1:端口号",
|
||
"For more details, and functionality, see the documentation (coming soon)": "更多细节和功能，请查阅文档（筹备中）",
|
||
"for more detials": " 来查看更多细节",
|
||
"for more info/ a Guide.": "获取更多信息 / 指南",
|
||
"For more information, please visit the TensorRT Extension GitHub page": "需要了解更多信息，可以查看 TensorRT 扩展的 GitHub 页面 → ",
|
||
"(for mouse only)": "(仅限鼠标)",
|
||
"For negative prompts, please write your positive prompt, then --neg ugly, text, assymetric, or any other negative tokens of your choice. OR:": "对于反向提示词，请写出你的正向提示词，然后添加 --neg ugly,text,assymetric 等您选择的任何其他反向提示词。或者：",
|
||
"(For [red:green:N]; old: If N < 1, it's a fraction of steps (and hires fix uses range from 0 to 1), if N >= 1, it's an absolute number of steps; new: If N has a decimal point in it, it's a fraction of steps (and hires fix uses range from 1 to 2), othewrwise it's an absolute number of steps)": "(对于如 [red:green:N] 的表达式; 旧: 若 N < 1, 则其表示占总迭代步数的比例 (且高分辨率修复使用的范围是 0 - 1), 若 N >= 1, 则其表示一个确定的迭代步数数值; 新: 若 N 值含小数点, 则其表示占总迭代步数的比例 (且高分辨率修复使用的范围是 1 - 2), 其他情况则表示一个确定的迭代步数数值)",
|
||
"For SD upscale, how much overlap in pixels should there be between tiles. Tiles overlap so that when they are merged back into one picture, there is no clearly visible seam.": "使用 SD 放大時，圖塊之間應該有多少畫素重疊。圖塊之間需要重疊才可以讓它們在合併回一張圖像時，沒有清晰可見的接縫",
|
||
"(for small sets of custom tags)": "(少量的自定义标签)",
|
||
"for supported extensions)": " 寻找已支持的扩展)",
|
||
"(for use with zero terminal SNR trained models)": "(在使用通过零终信噪比 (Zero Terminal-SNR) 训练的模型时)",
|
||
"for your animation (leave blank to ignore).": "用于你的动画中（留空表示忽略）",
|
||
"Found a bug or want to ask for a feature ? Please": "发现了一个错误或想请求添加一个功能？请",
|
||
"Found a bug or want to ask for a feature ? Please use": "发现了一个错误或想请求添加一个功能？请使用",
|
||
"Found a bug or want to ask for a feature ? Please use ": "发现了 Bug 或者有个新的想法？请访问 ",
|
||
"Found tags": "匹配的标签",
|
||
"FOV schedule": "视场角(FOV)调度计划",
|
||
"fp16": "fp16",
|
||
"fp32": "fp32",
|
||
"FP8 weight": "FP8 权重",
|
||
"fps": "帧率",
|
||
"fps: ": "帧率：",
|
||
"FPS": "帧率",
|
||
"fraction of sampling steps when the switch to refiner model should happen; 1=never, 0.5=switch in the middle of generation": "在迭代步数完成占比的多少切换 Refiner 模型; 1 = 不切换, 0.5 = 在生成迭代步数完成一半时切换",
|
||
"(fraction of sampling steps when the swtch to refiner model should happen; 1=never, 0.5=switch in the middle of generation)": "(在迭代步数完成占比的多少切换 Refiner 模型; 1 = 不切换, 0.5 = 在生成迭代步数完成一半时切换)",
|
||
"frame extracted": "帧序列转换完成。",
|
||
"Frame Height": "帧高度",
|
||
"Frame Interpolation": "帧插值",
|
||
"Frame Interpolation to smooth out, slow-mo (or both) any video.": " 进行帧插值来让任何视频获得顺滑的切换效果，慢动作 (或两者皆可)",
|
||
"Frame Interpolation will *not* run if any of the following are enabled: 'Store frames in ram' / 'Skip video for run all'.": "帧差值将不会在以下任一选项启用时启动：“保存帧图像到内存” / “跳过视频”",
|
||
"Framerate": "偵率",
|
||
"Frames": "总帧数",
|
||
"frames per keyframe": "每几帧提取1个关键帧",
|
||
"Frames per second (FPS)": "帧率 (FPS)",
|
||
"Frames Per Wave": "每波帧数",
|
||
"Frames to Video": "帧图片转视频",
|
||
"Frame Width": "帧宽度",
|
||
"Free GPU": "释放显存",
|
||
"Freeze CLIP Normalization Layers": "凍結 CLIP 正規化層",
|
||
"Frequency": "频率",
|
||
"from": "從",
|
||
"(from CivitAI)": "(来自 Civitai)",
|
||
"From (full path)": "从 (输入完整路径)",
|
||
"full": "完整",
|
||
"Full": "完整",
|
||
"Full page image viewer: control icon unfocused opacity": "网页全屏查看器: 控制图标未悬停时的不透明度",
|
||
"Full page image viewer: enable": "网页全屏查看器: 启用",
|
||
"Full page image viewer: gamepad repeat period": "网页全屏查看器: 游戏手柄回报率",
|
||
"Full page image viewer: navigate with gamepad": "网页全屏查看器: 启用游戏手柄导航",
|
||
"Full page image viewer: show images zoomed in by default": "网页全屏查看器: 默认情况下显示放大的图像",
|
||
"Full page image viewer: tool bar opacity": "网页全屏查看器: 工具栏不透明度",
|
||
"full prompts list in a JSON format. value on left side is the frame number": "JSON 格式的完整提示词列表, 左边的值是帧序号",
|
||
"Full quality": "完整质量",
|
||
"Full res mask": "全分辨率蒙版",
|
||
"Full res mask padding": "全分辨率蒙版的填充预留像素宽度",
|
||
"Fullscreen": "全屏",
|
||
"- Fullscreen mode": " - 全螢幕模式",
|
||
"Fullscreen Mode, maximizes the picture so that it fits into the screen and stretches it to its full width": "全屏模式, 将图片最大化, 使其匹配屏幕, 并拉伸至全尺寸宽度",
|
||
"(Full = slow but pretty; Approx NN and TAESD = fast but low quality; Approx cheap = super fast but terrible otherwise)": "(完整 = 慢但显示效果好; Approx NN 和 TAESD = 快速但低质量; Approx cheap = 超级快但最糟糕)",
|
||
"gallery": "图库",
|
||
"Gallery": "画廊",
|
||
"Gallery height": "(用于输出生成图像的) 画廊高度",
|
||
"Gallery height in _absolute_ percent of your screen (not remaining height)": "图像输出栏高度占屏幕的百分比 (非剩余高度)",
|
||
"Gamepad repeat period, in milliseconds": "游戏手柄回报率 (单位: 毫秒)",
|
||
"gamma": "伽马值",
|
||
"Gamma": "伽马值",
|
||
"Gap fill technique": "间隙填充技术",
|
||
"Gather": "生成",
|
||
"Gen": "生成",
|
||
"Gender of the character": "角色性别",
|
||
"General": "一般的",
|
||
"⚙️ General Settings": "⚙️ 基础设置",
|
||
"Generate": "產生",
|
||
"GENERATE": "生成",
|
||
"Generate 3D inpainted mesh": "生成 3D着色网格",
|
||
"Generate 3D inpainted mesh. (Sloooow, required for generating videos)": "生成优化3D网格 (超慢，用于生成视频)",
|
||
"Generate 4 demo videos with 3D inpainted mesh.": "使用 3D 优化网格生成4个演示视频",
|
||
"Generate a checkpoint at the current training level.": "保存一个位于当前训练进度的模型文件。",
|
||
"Generate a checkpoint at the current training lvel.": "保存一个位于当前训练进度的模型文件。",
|
||
"Generate a .ckpt file when saving during training.": "在訓練期間儲存時產生 .ckpt 文件。",
|
||
"Generate a .ckpt file when training completes.": "在訓練完成時產生 .ckpt 文件。",
|
||
"Generate a .ckpt file when training is canceled.": "在訓練取消時產生 .ckpt 文件。",
|
||
"Generate all checkpoint preview": "生成所有模型预览图",
|
||
"Generate all checkpoint preview after train finished": "训练完成后生成所有模型的预览图",
|
||
"Generate All Styles In Order": "顺序生成所有样式",
|
||
"Generate a mask image.": "生成一个蒙版图像。",
|
||
"Generate Batch": "批量处理",
|
||
"Generate Caption": "生成描述文本",
|
||
"Generate Ckpt": "產生 Ckpt",
|
||
"Generate Class Images": "產生類別(正則) 圖片",
|
||
"Generated psd file": "生成的 .psd 文件",
|
||
"Generated video": "生成视频",
|
||
"Generate .ebs file.(ebsynth project file)": "生成 .ebs 文件。（Ebsynth 工程文件）",
|
||
"Generate forever": "無限產生",
|
||
"Generate Graph": "產生圖形",
|
||
"Generate graphs from training logs showing learning rate and loss averages over the course of training.": "根据训练日志生成图表，展示训练过程中的学习率和损失 (Loss) 平均值。",
|
||
"Generate HeatMap": "生成热力图",
|
||
"Generate human masks": "生成人工蒙版",
|
||
"Generate Info": "產生資訊",
|
||
"Generate inputframes": "生成输入帧",
|
||
"Generate layout for batch process": "生成批量处理的图像分布",
|
||
"Generate layout for single image": "生成单张图像的图像分布",
|
||
"Generate me some prompts!": "生成一些提示词",
|
||
"Generate Movie Mode": "视频生成模式",
|
||
"Generate Preview": "產生預覽",
|
||
"Generate preview every N frames": "每 N 帧生成预览",
|
||
"Generate preview images every N epochs.": "每 N Epochs 生成一张预览图",
|
||
"Generate preview images every N steps.": "每 N 步生成一次预览图像",
|
||
"Generate preview video during generation? (Preview does not include frame interpolation or upscaling.)": "在生成过程中生成预览视频? (预览视频不包括帧插值或放大)",
|
||
"Generate random prompts from lexica.art (your prompt is used as a search query).": "從 lexica.art 產生隨機提示詞（你的提示詞會被用作搜尋查詢）",
|
||
"Generate Sample Images": "產生樣本圖像",
|
||
"Generate sample images using the currently saved diffusers model.": "使用当前保存的 diffusers 模型生成样本图像。",
|
||
"Generate simple 3D mesh": "生成简单 3D网格",
|
||
"Generate simple 3D mesh. (Fast, accurate only with ZoeDepth models and no boost, no custom maps)": "生成简单3D网格 (快速, 仅适用于 ZoeDepth 模型, 无 Boost, 无 Maps)",
|
||
"Generate stereoscopic image(s)": "生成立体图像",
|
||
"Generate video": "生成视频",
|
||
"Generate Video": "產生影片",
|
||
"Generate video from inpainted(!) mesh.": "从深度图生成视频。",
|
||
"Generation": "生產",
|
||
"Generation Info": "生成信息",
|
||
"Generation mode": "生成模式",
|
||
"Generation Parameters": "生成参数",
|
||
"Generation settings:": "生成设置:",
|
||
"Generation TEST!!(Ignore Project directory and use the image and mask specified in the main UI)": "生成测试!!（忽略工程目录，使用用户界面中指定的图像和蒙版）",
|
||
"Generation will stop after finishing this image, click again to stop immediately.": "完成当前图像的生成后将中止生成，再次单击可立即中止。",
|
||
"Generator device": "生成设备",
|
||
"Gen Options": "生成选项",
|
||
"Get Civitai Model Info by Model Page URL": "从 Civitai 模型页面链接拉取模型信息",
|
||
"*Get depth from uploaded video*": "*从上传的视频中获取深度*",
|
||
"Get javascript logs": "获取 Javascript 日志",
|
||
"Get List": "获取列表",
|
||
"Get mask": "获取蒙版",
|
||
"Get mask as alpha of image": "将蒙版用于 Alpha 通道图",
|
||
"Get Model Info by Civitai Url": "通过 Civitai 链接获取模型信息",
|
||
"Get Model Info from Civitai": "从 Civitai 上获取模型信息",
|
||
"Get Model Info from Civitai by URL": "从 Civitai 链接获取模型信息",
|
||
"Get prompt from:": "从此处获取提示词：",
|
||
"Get sub directories": "讀取子目錄",
|
||
"Get Tags": "获取标签",
|
||
"Getting Started": "新手上路",
|
||
"GFPGAN as Face enhancer": "使用 GFPGAN 增强面部",
|
||
"GFPGAN vis.": "GFPGAN 可见程度",
|
||
"GFPGAN visibility": "GFPGAN 可見度",
|
||
"github": "GitHub",
|
||
"git version info": "Git 版本信息",
|
||
"Give a similarity score between two images (only first face is compared).": "输出两张图像中面部的相似度分数 (仅比较第一张面部)",
|
||
"give it a star on GitHub": "在 GitHub 上給它一顆星星",
|
||
"Global-Inpainting (all faces)": "全局重绘 (所有面部)",
|
||
"Global Post-Processing": "全局后期处理设置",
|
||
"GLOB patterns (comma separated)": "待匹配的 GLOB 模板 (以英文逗号分割)",
|
||
"Glob recursively with input directory pattern": "输入目录模式全局递归",
|
||
"Glow": "辉光",
|
||
"Glow mode": "辉光模式",
|
||
"Gold Pendant": "装饰艺术",
|
||
"gore": null,
|
||
"Gothic": "Gothic (哥特)",
|
||
"Go to Settings → User Interface → Quick Settings List, add sd_unet. Apply these settings, then reload the UI.": "前往设置 → 用户界面 → 快捷设置列表，添加 sd_unet → 保存设置 → 重载 UI 。",
|
||
"grad": "梯度",
|
||
"Gradient accumulation steps": "梯度累加步數",
|
||
"Gradient Accumulation Steps": "梯度累積疊代步數",
|
||
"Gradient Checkpointing": "梯度進度記錄",
|
||
"Gradient Clipping": "梯度修剪",
|
||
"Gradient clip value": "梯度剪裁值",
|
||
"gradio launch": "启动 Gradio",
|
||
"Gradio theme": "Gradio 主題",
|
||
"Gradio theme (requires restart)": "Gradio 主题样式 (需重启)",
|
||
"graffiti": null,
|
||
"Graffiti": "Graffiti (涂鸦)",
|
||
"graphic design": "graphic design (平面设计)",
|
||
"Graph Smoothing Steps": "圖形平滑步驟",
|
||
"gray": "灰度",
|
||
"Great": "很好的",
|
||
"greg mode": "greg mode (Greg Mike: 美国艺术家)",
|
||
"Grid layout": "網格布局",
|
||
"Grid margins (px)": "網格邊距（px）",
|
||
"Grid row count; use -1 for autodetect and 0 for it to be same as batch size": "宮格圖行數； 使用 -1 進行自動檢測，使用 0 使其與每批數量相同",
|
||
"GroundingDINO batch progress status": "GroundingDINO 批量处理状态",
|
||
"GroundingDINO Box Threshold": "GroundingDINO 箱体阈值",
|
||
"GroundingDINO Detection Prompt": "GroundingDINO 检测提示词",
|
||
"GroundingDINO Model (Auto download from huggingface)": "GroundingDINO 模型 (自动从 huggingface 下载)",
|
||
"GroundingDINO + Segment Anything can achieve [text prompt]->[object detection]->[segmentation]": "GroundingDINO + Segment Anything 可以实现 [文本提示词]->[对象检测]->[语义分割]",
|
||
"Group/split table by: (when not started with single quote - so only for prompts, not for merge)": "提示词分组方式（非单引号开头时）：",
|
||
"Grunge": "Grunge (垃圾摇滚)",
|
||
"GTA": "GTA (侠盗猎车手)",
|
||
"Guess Mode": "无提示词引导模式",
|
||
"Guidance End (T)": "引导终止时机",
|
||
"Guidance scale": "引导系数",
|
||
"Guidance scale webui": "webui CFG 引导系数",
|
||
"Guidance Start (T)": "引导介入时机",
|
||
"Guided Images": "引导图像",
|
||
"Guided images schedules": "图像引导参数表",
|
||
"🎓 Guides": "🎓 教程",
|
||
"Hair": "头发",
|
||
"HakuImg": "Haku 图像处理",
|
||
"haku_output": "Haku 输出",
|
||
"Half Model": "半精度模型",
|
||
"Hands": "手掌",
|
||
"Hand Size": "手掌尺寸",
|
||
"Happy prompting!": "祝写提示词愉快！",
|
||
"hard_light": "實光",
|
||
"Has EMA:": "有 EMA：",
|
||
"hash": "雜湊值",
|
||
"Hash:": "哈希值: ",
|
||
"has metadata": "有中繼資料",
|
||
"has user metadata": "有使用者中繼資料",
|
||
"Hat": "帽子",
|
||
"Head Size": "头部尺寸",
|
||
"height": "高度",
|
||
"Height": "高度",
|
||
"Height of the image editor": "图像编辑器高度",
|
||
"Height Resolution": "高度分辨率",
|
||
"Help": "帮助",
|
||
"Helper": "助手",
|
||
"Help for Jinja2 templates": "Jinja2 模板幫助",
|
||
"[here]": "[这里]",
|
||
"here": "這裡",
|
||
"Here, a random number between 1 and 3 words from adjective.txt will be chosen and joined together with the word 'and' instead of the default comma.": "此處，會從 adjective.txt 中選取隨機 1 至 3 行，以 'and'（而不是默認的逗號）拼接",
|
||
"Hidden SSID": "隐藏 SSID",
|
||
"Hidden UI tabs": "选择需要隐藏的标签栏",
|
||
"Hidden UI tabs (requires restart)": "需要隐藏的 UI 选项卡 (需要重启)",
|
||
"Hide": "隐藏",
|
||
"Hide accordion by default": "默认隐藏手风琴 UI",
|
||
"Hide annotator result": "隐藏预处理预览结果",
|
||
"Hide \"auto-sd-paint-ext Guide/Panel\" after restart.": "重启后隐藏 \"auto-sd-paint-ext Guide/Panel\" 面板",
|
||
"Hide caption": "隱藏描述",
|
||
"Hide checked Civitai Helper buttons on model cards": "隐藏已选中的出现在模型卡片上 Civitai 助手按钮",
|
||
"Hide early access models": "隐藏抢鲜体验模型",
|
||
"Hide extensions with tags": "隱藏含有以下標記的擴充工具",
|
||
"Hide heatmap images": "隱藏熱度圖",
|
||
"Hide networks of unknown versions for model versions": "为以下所选的模型版本隐藏未知版本的模型",
|
||
"Hide Non-API Components (Restarts UI)": "隐藏非 API 组件（需重启 UI）",
|
||
"Hide samplers in user interface": "隐藏用户界面中的采样方法",
|
||
"Hide samplers in user interface (requires restart)": "在用户界面中隐藏采样方法 (需重启)",
|
||
"Hide sub-folders that start with a '.'": "隐藏以 \" . \" 开头的子文件夹",
|
||
"Hide sub-folders that start with a .": "隐藏名称以英文半角句号 \" . \" 开头的子文件夹",
|
||
"Hide subprompt masks in prompt mode": "在提示词模式下隐藏次级提示词蒙版",
|
||
"High": "高",
|
||
"high contrast": null,
|
||
"Higher levels increases complexity and randomness of generated prompt": "随机等级越高, 生成的提示词越复杂和随机",
|
||
"Highest Rated": "Highest Rated (最高评分)",
|
||
"Highres. fix": "高分辨率修复",
|
||
"High res only": "仅高分辨率",
|
||
"Hips": "臀部尺寸",
|
||
"Hires CFG": "高分修复提示词引导系数",
|
||
"Hires checkpoint": "高解析度模型權重存檔點",
|
||
"hires. fix": "高分辨率修复",
|
||
"hires_fix": "高解析度修正",
|
||
"hiresfix": "高清修复",
|
||
"Hires. fix": "高解析度修正（Hires. fix）",
|
||
"Hires. fix+": "高分修复PLUS",
|
||
"Hires-Fix Option": "高分辨率修复选项",
|
||
"Hires fix: show hires checkpoint and sampler selection": "高分辨率修复: 显示高分模型和采样方法选项",
|
||
"Hires fix: show hires prompt and negative prompt": "高分辨率修复: 显示高分辨率修复的正反提示词输入框",
|
||
"Hires fix: show hires sampler selection": "高分辨率修复: 显示高分采样方法选择栏",
|
||
"Hires. fix+ to do steps optimization": "高分修复 PLUS 来优化迭代步数的话",
|
||
"Hires fix: which pass to enable refiner for": "高分辨率修复: 选择需要启用 refiner 模型的层",
|
||
"Hires Negative prompt": "高分修复反向提示词",
|
||
"Hires Prompt": "高分修复正向提示词",
|
||
"Hires sampling method": "高解析度取樣方法",
|
||
"Hires Sampling method": "高分辨率修复采样方法",
|
||
"Hires steps": "高解析步驟",
|
||
"hires upscaler": "高分辨率修复放大算法",
|
||
"Historical": "Historical (当前帧前的倒数第二帧)",
|
||
"History": "歷史記錄",
|
||
"Homepage": "主页",
|
||
"horizontal": "水平",
|
||
"Horizontal": "水平",
|
||
"Horizontal Mirroring": "水平鏡像",
|
||
"horizontal only": "仅水平方向",
|
||
"horizontal split num": "水平分割数",
|
||
"Horizontal+Vertical Mirroring": "垂直+水平鏡像",
|
||
"horror": null,
|
||
"Horror": "Horror (恐怖)",
|
||
"how closely the image should conform to the prompt. Lower values produce more creative results. (recommended range 5-15)": "图像应符合提示词的程度。较低的值会产生更具创造性的结果。（建议范围5-15）",
|
||
"how closely the image should conform to the prompt. Lower values produce more creative results. (recommended range 5-15)`": "图像与提示词的相符程度。较低的数值会产生更有创意的结果 (推荐范围: 5-15)",
|
||
"how close to get to the colors of the input frame image/ the amount each frame during a tweening step to use the new images colors": "贴合输入帧图像的颜色的程度 / 在中间计算步骤中使用新图像颜色的每帧数量",
|
||
"How many batches of images to create": "创建多少批量次数的图像",
|
||
"How many classification images to use per instance image.": "每个实例图像使用类别图像的数量。",
|
||
"How many classifier/regularization images to generate at once.": "一次生成多少分类/正则化图像。",
|
||
"How many images to process at once per training step?": "每步训练要处理多少张图像？",
|
||
"How many results to load at once": "一次載入多少個結果",
|
||
"How many samples to generate per subject.": "每个主题生成多少样本图像。",
|
||
"How many steps to wait before applying semantic guidance, default 10": "在应用语义引导之前需要等待多少步，默认为 10",
|
||
"How many timesteps to smooth graph data over. A lower value means a more jagged graph with more information, higher value will make things prettier but slightly less accurate.": "平滑图表数据的时间步数。数值越小，图表越参差不齐，但信息量越多；数值越大，图表越漂亮，但准确性稍差。",
|
||
"How many times to improve the generated image iteratively; higher values take longer; very low values can produce bad results": "疊代改進產生的圖像多少次；更高的值需要更長的時間；非常低的值會產生不好的結果",
|
||
"how many times to interpolate the source video. e.g source video fps of 12 and a value of x2 will yield a 24fps interpolated video": "源视频插值次数 (例如, 源视频帧数为12, 插值次数X为2, 则生成一个24帧的插值视频)",
|
||
"How many times to process an image. Each output is used as the input of the next loop. If set to 1, behavior will be as if this script were not used.": "設定圖像處理的迴圈次數，每次迴圈的輸出會作為下一個迴圈的輸入。若設定為1，則行為會像沒有使用此腳本一樣。",
|
||
"How much an image region can change before the original pixels are not blended in anymore.": "一个图像区域在原始像素不再混合之前可以改变的程度。",
|
||
"How much of noise from each octave is added on each iteration. Higher values will make it more straighter and sharper, while lower values will make it rounder and smoother. It is limited by 1.0 as the resulting gain fill the frame completely with noise.": "每次迭代时，每个倍频程的噪声增加量。数值越大越平直、越锐利，数值越小越圆滑。它的最大限制值为 1.0 ，该数值所产生的增益会使整个画面充满噪点。",
|
||
"how much the image should look like the previou one and new image frame init. strength schedule might be better if this is higher, around .75 during the keyfames you want to switch on": "上一图像和现在的图像的相似程度和新图像的初始化强度。设置更高的值对强度调度计划会更好，在你想切换关键帧中，围绕 0.75 设置",
|
||
"How much to blur the mask before processing, in pixels.": "處理前要對遮罩進行多強的模糊，以畫素為單位",
|
||
"How often, in seconds, to flush the pending tensorboard events and summaries to disk.": "多少秒刷新一次待辦 TensorBoard 事件和摘要到磁盤上",
|
||
"How sharp the transition should be between blended and not blended.": "混合与非混合之间的过渡尖锐程度。",
|
||
"How should Style Names Rendered on UI": "样式名称的 UI 渲染方式",
|
||
"How strongly partially masked content should be preserved.": "部分蒙版内容应被保留的强度。",
|
||
"How strongly the original mask should bias the difference threshold.": "原始蒙版偏离差异阈值的程度。",
|
||
"How strong of a variation to produce. At 0, there will be no effect. At 1, you will get the complete picture with variation seed (except for ancestral samplers, where you will just get something).": "想要產生多強烈的變化。設為 0 時，將沒有效果。設為 1 時，你將獲得完全產自差異隨機種子的圖像（此功能對帶有 a 後綴的取樣器無效）",
|
||
"How to complete nested wildcard paths": "通配符嵌套路径补全方式",
|
||
"How to complete nested wildcard paths (e.g. \"hair/colours/light/...\")": "通配符嵌套路径补全方式 (例如: \"hair/colors/light/...\")",
|
||
"How to handle input image?": "如何处理输入图像",
|
||
"hue": "色相",
|
||
"huge batch query (TF 2.10, experimental)": "巨量批次查询 (TF 2.10, 实验性)",
|
||
"HuggingFace cache directory, see huggingface_hub guides/manage-cache": "HuggingFace 缓存目录, 查看 huggingface_hub guides/manage-cache",
|
||
"Huggingface token": "Huggingface 令牌",
|
||
"HuggingFace Token": "HuggingFace 標記",
|
||
"humanoid": null,
|
||
"humanoid - A random humanoid, males, females, fantasy types, fictional and non-fictional characters. Can add clothing, features and a bunch of other things.": "humanoid - 人形 - 一个随机的人形生物，男性、女性、幻想类型，虚构或非虚构的生物。可以添加服装，特征和其他东西。",
|
||
"Humans Masking": "人工蒙版",
|
||
"hybrid_comp_mask_auto_contrast": "自动对比度合成蒙版",
|
||
"hybrid_comp_mask_blend_alpha_schedule": "合成蒙版透明度混合调度计划",
|
||
"hybrid_comp_mask_type": "合成蒙版类型",
|
||
"Hybrid composite": "混合合成模式",
|
||
"Hybrid motion": "混合运动模式",
|
||
"Hybrid motion may be used with hybrid composite off, to just use video motion.": "混合运动模式可以在关闭混合合成的情况下使用, 针对视频运动",
|
||
"Hybrid Schedules": "合成调度计划",
|
||
"Hybrid Settings": "混合设置",
|
||
"Hybrid Video": "混合影片",
|
||
"Hybrid Video Compositing in 2D/3D Mode": "2D/3D 模式下的混合视频合成",
|
||
"Hybrid Video Schedules": "视频混合调度计划",
|
||
"Hypernetwork": "超網路",
|
||
"Hypernetwork Learning rate": "超網路學習率",
|
||
"Hypernetwork: refresh": "超网络 (Hypernetwork): 刷新",
|
||
"Hypernetworks": "超網路（Hypernetwork）",
|
||
"Hyperrealism": "Hyperrealism (超现实主义-艺术)",
|
||
"Hypertile U-Net max depth": "Hypertile U-Net 最大深度",
|
||
"Hypertile U-Net max tile size": "Hypertile U-Net 最大分块尺寸",
|
||
"Hypertile U-Net swap size": "Hypertile U-Net 交换规模",
|
||
"Hypertile VAE max depth": "Hypertile VAE 最大深度",
|
||
"Hypertile VAE max tile size": "Hypertile VAE 最大分块尺寸",
|
||
"Hypertile VAE swap size": "Hypertile VAE 交换规模",
|
||
"Idea and inspiration by xKean.": "这个创意受 xKean 启发。",
|
||
"Idea by redditor jonesaid.": "这个创意来自于 redditor: jonesaid 。",
|
||
"Identifer:BlockID:Elements:Ratio,...,separated by empty line": "识别名:区块ID:组件:权重,...,用空行分隔",
|
||
"If $$ is not provided, then 1$$ is assumed.": "若沒提供 $$，默認為 1$$",
|
||
"If a model was extracted or trained with EMA weights, these will be appended separately to the model for use in training later.": "若模型是提取或者和 EMA 权重一同训练，这些权重会单独添加到模型中，供以日后训练使用。",
|
||
"If an image is specified below, it will be used with highest priority.": "如果在下面指定的一张图像，它将以最高优先级使用。",
|
||
"If an image is too large, crop it from the center.": "如果图像太大，则从中心裁剪掉边缘",
|
||
"If blank or set to 0, parameters in the \"txt2img\" tab are used.": "如留空或设置为 0，则使用 \"文生图\" 选项卡中的参数",
|
||
"If checked, the modified area will appear around the edges of the image. If unchecked, the modified area will appear in the center of the image.": "若选中，修改区域将出现在图像的边缘；若不选中，修改区域将显示在图像的中心。",
|
||
"If Deforum crashes due to CN updates, go": "如果 Deforum 由于 ControlNet 版本更新而崩溃，请前往",
|
||
"If EMA weights are saved in a model, these will be extracted instead of the full Unet. Probably not necessary for training or fine-tuning.": "如果模型中保存了 EMA 权重，则提取该权重，而不是完整的 Unet 。\n训练或微调也许没有必要勾选。",
|
||
"If Empty": "如果为空",
|
||
"If enabled, changes the behavior or hybrid_motion to captures motion by comparing the current video frame to the previous rendered image, instead of the previous video frame.": "如启用，将改变混合运动模式的行为，通过比较当前视频帧和上一帧渲染图像来捕获运动，而不是和上一帧视频帧比较。",
|
||
"If enabled, only images will be saved": "启用时, 仅保存图片",
|
||
"if enabled, raw imgs will be deleted after a successful video/ videos (upsacling, interpolation, gif) creation": "如启用, 则在成功创建视频/其他项目 (放大，插值，gif) 后删除原始图像",
|
||
"If loading of the Yolov5_anime model fails, check": "如果 Yolov5_anime 模型加载失败，请查看",
|
||
"If multiple .ebs files are generated, run them all.": "如果生成了多个 .ebs 文件，则需要全部运行。",
|
||
"If non-deforum frames, use the correct number of counting digits. For files like 'bunnies-0000.jpg', you'd use 'bunnies-%04d.jpg'": "如果不是 Deforum 的帧图片, 请使用正确的计数位数。对于像 'bunnies-0000.jpg' 这样的文件, 需使用 'bunnies-%04d.jpg'",
|
||
"(If not, Approx NN will be used instead; Full live preview method is very detrimental to speed if lowvram/medvram optimizations are enabled)": "(若不启用本选项, 则使用 Approx NN 作为替代; 在 lowvram/medvram 优化下使用完整实时预览模式会导致生成速度异常缓慢)",
|
||
"(if not: sort by score)": "(如不启用: 按评分排序标签)",
|
||
"(if not: use underscores)": "(如不启用: 使用下划线)",
|
||
"If out-* directory already exists in the Project directory, delete it manually before executing.": "如果out-*目录已经存在于工程目录中，请在执行前手动删除它。",
|
||
"iFrame height": "Photopea 界面高度",
|
||
"If \"Save a copy of image before doing face restoration.\" is enabled, save every image during rolling generation": "如果 \"在进行面部修复前保存图像副本 \" 选项启用，则梯度放大倍数生成时保存每张图像",
|
||
"If setting2prompt width, which width-ratio between both columns (0: minimize setting, 1: 50/50, 6: minimize output gallery column)": "设置文生图, 图生图双栏宽度比 (0: 最小化左侧栏宽度, 1: 双侧栏各占50%宽度, 6: 最小化右侧图像输出栏)",
|
||
"If setting2prompt width, which width-ratio between both columns (0: minimize setting, 1: 50/50, 6: minimize output gallery column)": "设置文生图, 图生图双栏宽度比 (0: 最小化左侧栏宽度, 1: 双侧栏各占50%宽度, 6: 最小化右侧图像输出栏)",
|
||
"If Smart-Step is enabled, the number of iterations for Hires. fix will never be less than this:": "如果启用优化迭代步数，高分辨率修复的迭代步数将永远不会少于本选项设置的数值：",
|
||
"If .srt file is saved, soft-embed the subtitles into the rendered video file": "如果保存了 .srt 文件，则将该字幕文件软嵌入到渲染的视频文件中",
|
||
"If the chosen number of terms is greater than the available terms, then some terms will be duplicated, otherwise chosen terms will be unique. This is useful in the case of wildcards, e.g.": "選的項數多於提供的項數時，有些項會重複，其餘情況各選項會保持唯一；\n重複對於萬用字元很有用，例如：",
|
||
"If the ControlNet Plugin is enabled, which do you use first?": "若 ControlNet 扩展已启用，优先使用的是？",
|
||
"(if the file size is above the limit, or either width or height are above the limit)": "(如果图像文件大小超过限制, 或者其宽度或高度超过限制)",
|
||
"If the number of tokens is more than the number of vectors, some may be skipped.\nLeave the textbox empty to start with zeroed out vectors": "如果標記數量大於向量數量，則可能會被跳過。\n留下文字方塊空白以開始填零的向量",
|
||
"If the saved image file size is above the limit, or its either width or height are above the limit, save a downscaled copy as JPG": "当图像文件大小或尺寸超过限制，另存一份缩小的副本为 JPG 格式",
|
||
"If this option is selected, many extra frames will be output for the various processes into the hybridframes folder.": "如启用本选项, 额外帧会输出到多种进程的混合帧文件夹",
|
||
"If this values is non-zero, it will be added to seed and used to initialize RNG for noises when using samplers with Eta. You can use this to produce even more variation of images, or you can use this to match images of other software if you know what you are doing.": "如果這個值不為零，它將被加入到隨機種子中，並在使用帶有 Eta 的取樣器時用於初始化隨機噪點。你可以使用它來產生更多的圖像變化，或者你可以使用它來模仿其他軟體生成的圖像，如果你知道你在做什麼",
|
||
"If true, instead of sending the flattened image, will send just the currently selected layer.": "如果勾选，将不发送拼合后的图像，而只发送当前选中的图层。",
|
||
"If using a blend mask, this controls the blend amount of the video and render for the composite mask.": "如使用混合蒙版，则控制视频的混合量和合成蒙版的渲染量。",
|
||
"If using autocontrast option, this is the high cutoff for the operation.": "如使用自动对比度选项，这是对比度操作的最高隔断值。",
|
||
"If using autocontrast option, this is the low cutoff for the operation.": "如使用自动对比度选项，这是对比度操作的最低隔断值。",
|
||
"If you are using these templates, please let me know if they are useful.": "如果你在用這些模板，請告訴我它們是否有用",
|
||
"(If you choose 'Shift' you cannot scroll horizontally, 'Alt' can cause a little trouble in firefox)": "(如果选择 'Shift' 则不能控制水平移动, Firefox 浏览器下选择 'Alt' 会出点小问题)",
|
||
"If you do not know the path, try opening the folder in Explorer and copying the path": "如果不知道路径，可以尝试在资源管理器打开文件夹后复制路径",
|
||
"If you do not like the selection, you can modify it manually.": "如果你不喜欢这些选择，你可以手动修改它。",
|
||
"If you have already created a background video in Invert Mask Mode([Ebsynth Utility]->[configuration]->[etc]->[Mask Mode]),": "如果你已经在反相蒙版模式下创建了一个背景视频（[Ebsynth Utility]->[插件配置]->[其他]->[蒙版模式]），",
|
||
"If you have any issues please visit": "如有任何问题欢迎浏览 ",
|
||
"If you have bad results and don't want to fine-tune here, just enable Codeformer in \"Global Post-Processing\".": "若生成了不好的结果图像但又不想从此处微调，那就在 \"全局后期处理\" 中启用 Codeformer",
|
||
"If you have trouble entering the video path manually, you can also use drag and drop.For large videos, please enter the path manually.": "如果你手动输入视频路径嫌麻烦，也可以使用拖放。但是对于大型视频，还是烦请手动输入路径。",
|
||
"If you liked this extension, please": "如果您喜歡這個擴展，請",
|
||
"(If your wildcard files have a specific custom order, disable this to keep it)": "(若通配符文件有特定的自定义顺序, 请禁用本选项以保留他们)",
|
||
"If you still cannot understand, use default.": "如果你仍然无法理解，请保持默认值。",
|
||
"If you want to": "如果你想",
|
||
"If you want to use the same tagging results the next time you run img2img, rename the file to prompts.txt": "如果想在下次运行图生图时使用同样的标记结果，请将该文件重命名为 prompts.txt",
|
||
"If you want to use Width/Height which are not multiples of 64, please change noise_type to 'Uniform', in Keyframes --> Noise.": "如果您想使用非 64 的倍數作為寬度/高度，請在關鍵幀 --> 噪音中將 噪音類型（noise_type） 設置為 '均勻分佈（Uniform）'。",
|
||
"ignore": "無視",
|
||
"Ignore": "忽略",
|
||
"Ignore black area": "忽略黑色区域",
|
||
"Ignore emphasis": "忽略强调符号",
|
||
"Ignore faces larger than specified size": "忽略大于设定尺寸的脸",
|
||
"Ignore: keep prompt and styles dropdown as it is.": "忽略: 保持提示词和预设样式下拉菜单不变",
|
||
"(ignore last layers of CLIP network; 1 ignores none, 2 ignores one layer)": "(CLIP 网络的忽略层数; 1 不忽略, 2 忽略 1 层)",
|
||
"Ignore mask on ControlNet input image if control type is not inpaint": "若控制类型未设置为 “局部重绘” 时忽略 ControlNet 输入图像上的蒙版",
|
||
"Ignore matching rules when collecting the class dataset. (# of class images must still be configured on the concepts tab).": "收集类别数据集时无视匹配规则。(# 仍须在概念选项卡上配置类别图像的数量)",
|
||
"Ignore sd-webui grammar": "忽略 SD-WebUI 语法",
|
||
"Ignore selected VAE for stable diffusion checkpoints that have their own .vae.pt next to them": ".vae.pt 模型權重存檔點在名稱相同時，忽略掉選中的 VAE",
|
||
"Ignores step count - uses a number of steps determined by the CFG and resolution": "忽略步驟數，使用由 CFG 和解析度確定的步驟數",
|
||
"Ignore whitespace in prompts: All newlines, tabs, and multiple spaces are replaced by a single space": "忽略提示中的空格：所有換行符號、定位點和多個空格都會被替換為一個空格。",
|
||
"I know what I am doing.": "我知道我在做什麼。",
|
||
"Illustration": "插画",
|
||
"image": "图像",
|
||
"Image": "映像檔",
|
||
"Image browser": "圖庫瀏覽器",
|
||
"Image Browser": "圖庫瀏覽器",
|
||
"Image Browser Settings": "Cozy 图库浏览器设置",
|
||
"Image CFG Scale": "圖像提示詞相關性",
|
||
"Image Count": "圖像數",
|
||
"Image creation progress preview mode": "图像生成过程预览模式",
|
||
"Image data view": "图像数据查看",
|
||
"Image Directory": "圖像目錄",
|
||
"Image File": "图像文件",
|
||
"Image for Auto Segmentation": "用于语义分割的图像",
|
||
"Image for Image Layout": "用于图像分布的图像",
|
||
"Image for img2img": "圖生圖的圖像",
|
||
"Image for inpainting with mask": "用於局部重繪並手動畫遮罩的圖像",
|
||
"Image for Recognition": "识别图像的分辨率",
|
||
"Image for Segment Anything": "用于分离的图像",
|
||
"Image Generation Library": "圖像生成",
|
||
"Image Generation Scheduler": "圖像生成採樣方式",
|
||
"Image height": "圖像高度",
|
||
"Image Init": "图像初始化",
|
||
"Image Input": "图像输入",
|
||
"image into latent space representation and back. Latent space representation is what stable diffusion is working on during sampling\n(i.e. when the progress bar is between empty and full). For txt2img, VAE is used to create a resulting image after the sampling is finished.\nFor img2img, VAE is used to process user's input image before the sampling, and to create an image after sampling.": " 图像和潜空间表征互相转换。潜空间表征是 Stable Diffusion 在采样过程中的实际操作对象。(即进度条处于 \"空\" 和 \"满\" 之间的状态)。\n对于文生图，VAE 仅用于在采样完成后创建 RGB 图像。\n对于图生图，VAE 用于在采样前把用户输入的图像处理为潜空间表征，并在采样后创建 RGB 图像。",
|
||
"Image Layout": "图像分布",
|
||
"Image layout status": "图像分布状态",
|
||
"Image Parameters": "圖像參數",
|
||
"Image path": "图像路径",
|
||
"Image preview height": "圖像預覽高度",
|
||
"Image Processing": "圖像處理",
|
||
"(Images are output to ": "(图像将输出到 ",
|
||
"Images directory": "圖像目錄",
|
||
"Images filename pattern": "圖像檔案名格式",
|
||
"Images folder": "图像文件夹",
|
||
"Images path": "图像路径",
|
||
"Images to use for keyframe guidance": "用于关键帧引导的图像",
|
||
"Image strength schedule": "图像强度调度计划",
|
||
"Image to 3D": "图转 3D",
|
||
"Image to 3D mesh": "图像转 3D 网格",
|
||
"Image to be masked": "需要叠加蒙版的图像",
|
||
"Image width": "圖像寬度",
|
||
"I'm feeling lucky": "手氣不錯",
|
||
"img2img": "圖生圖",
|
||
"img2img alternative test": "圖生圖的另一種測試",
|
||
"img2img CFG": "图生图的提示词引导系数",
|
||
"img2img DDIM discretize": "圖生圖 DDIM 離散化",
|
||
"img2img denoise strength": "图生图的重绘幅度",
|
||
"img2img-grids": "img2img-網格",
|
||
"img2img: height of image editor": "图生图: 图像编辑器高度",
|
||
"img2img history": "图生图历史记录",
|
||
"Img2Img input will be used if no ControlNet input is specified.": "若不指定 ControlNet 输入图，将使用图生图输入的图片",
|
||
"img2img keyframes.": "将关键帧进行图生图。",
|
||
"img2img model to use": "图生图使用的模型",
|
||
"img2img padding": "图生图的预留像素宽度",
|
||
"Img2Img Repeat Count (Loop Back)": "图生图重复次数（回送）",
|
||
"img2img sampler": "图生图的采样方法",
|
||
"img2img Sampling steps": "图生图的采样迭代步数",
|
||
"img2img scale": "图生图的放大倍数",
|
||
"Img2Img Settings:": "图生图设置：",
|
||
"IMG2IMG upscale": "图生图放大",
|
||
"img2img upscaler": "图生图的放大算法",
|
||
"Import": "导入",
|
||
"Import a model from Huggingface.co instead of using a local checkpoint.": "从 Huggingface.co 导入模型而非使用本地的模型文件。",
|
||
"Import a model from Huggingface.co instead of using a local checkpoint. Hub model MUST contain diffusion weights. You can specify a local folder with a cloned model, no HF token will be needed in this case.": "从 Huggingface.co 导入模型，而不是使用本地模型。Huggingface 的模型必须包含 diffusion 权重。可指定带有克隆模型的本地文件夹，这种情况下不需要 HF 令牌。",
|
||
"⚠️ Important info, please read carefully": "⚠️ 重要信息，请仔细阅读",
|
||
"Important notes:": "重要信息:",
|
||
"Important Notes:": "重要事项：",
|
||
"Important notes and Help": "重要信息与帮助",
|
||
"*Important* notes on Prompts": "关于提示词模式的重要提示",
|
||
"import completed!": "导入完成！",
|
||
"import gradio": "导入 Gradio",
|
||
"Import image": "导入图像",
|
||
"import ldm": "导入 Idm",
|
||
"Import Model from Huggingface Hub": "从 Huggingface Hub 载入模型",
|
||
"Import settings from file": "从文件导入设置",
|
||
"import sgm": "导入 sgm",
|
||
"import torch": "导入 Torch",
|
||
"impressionism": null,
|
||
"Impressionist": "Impressionist (印象派)",
|
||
"(improves performance when prompt and negative prompt have different lengths; changes seeds)": "(当正向提示词与反向提示词长度不同时启用本选项可以提升性能; 影响随机性)",
|
||
"(in %)": "(%)",
|
||
"IN00": "输入层 00",
|
||
"IN01": "输入层 01",
|
||
"IN02": "输入层 02",
|
||
"IN03": "输入层 03",
|
||
"IN04": "输入层 04",
|
||
"IN05": "输入层 05",
|
||
"IN06": "输入层 06",
|
||
"IN07": "输入层 07",
|
||
"IN08": "输入层 08",
|
||
"IN09": "输入层 09",
|
||
"IN10": "输入层 10",
|
||
"IN11": "输入层 11",
|
||
"IN_A_00": "模型 A 输入层 00",
|
||
"IN_A_01": "模型 A 输入层 01",
|
||
"IN_A_02": "模型 A 输入层 02",
|
||
"IN_A_03": "模型 A 输入层 03",
|
||
"IN_A_04": "模型 A 输入层 04",
|
||
"IN_A_05": "模型 A 输入层 05",
|
||
"IN_A_06": "模型 A 输入层 06",
|
||
"IN_A_07": "模型 A 输入层 07",
|
||
"IN_A_08": "模型 A 输入层 08",
|
||
"IN_A_09": "模型 A 输入层 09",
|
||
"IN_A_10": "模型 A 输入层 10",
|
||
"IN_A_11": "模型 A 输入层 11",
|
||
"Inactive text color for image grids": "网格图未激活文本颜色",
|
||
"IN_B_00": "模型 B 输入层 00",
|
||
"IN_B_01": "模型 B 输入层 01",
|
||
"IN_B_02": "模型 B 输入层 02",
|
||
"IN_B_03": "模型 B 输入层 03",
|
||
"IN_B_04": "模型 B 输入层 04",
|
||
"IN_B_05": "模型 B 输入层 05",
|
||
"IN_B_06": "模型 B 输入层 06",
|
||
"IN_B_07": "模型 B 输入层 07",
|
||
"IN_B_08": "模型 B 输入层 08",
|
||
"IN_B_09": "模型 B 输入层 09",
|
||
"IN_B_10": "模型 B 输入层 10",
|
||
"IN_B_11": "模型 B 输入层 11",
|
||
"Include": "包含",
|
||
"Include confident of tags matches in results": "在结果中包含标签的匹配置信度",
|
||
"Include embeddings in normal tag results": "在普通标签结果中包含嵌入式模型 (embeddings)",
|
||
"Include images in sub directories": "包含子目錄的圖像",
|
||
"Include metadata in saved images": "在保存的图片中嵌入元数据",
|
||
"Include ranks of model tags matches in results.": "反推结果包含模型标签匹配等级",
|
||
"Include resource hashes in image metadata (for resource auto-detection on Civitai)": "在图像元数据中嵌入资源哈希值 (用于在 Civitai 上自动检测资源)",
|
||
"Include Sub Grids": "包括子網格",
|
||
"Include Sub Images": "包括子圖像",
|
||
"Include watermark in saved images": "在保存的图片中嵌入水印",
|
||
"Incremental/decremental percentage (-50%, +50%)": "增減百分比（-50％，+50％）",
|
||
"Increment seed after each controlnet batch iteration": "在每次 controlnet 批處理迭代後增大種子",
|
||
"Indent level": "缩进层级",
|
||
"Index": "索引",
|
||
"Infer styles from prompts of pasted infotext": "推断粘贴的生成信息文本的提示词中的预设样式",
|
||
"info": "info",
|
||
"Info": "資訊",
|
||
"Info and links": "资讯和链接",
|
||
"Info & Help": "信息与帮助",
|
||
"Info, Links and Help": "資訊、連結與幫助",
|
||
"Info object": "全部信息",
|
||
"Information": "信息",
|
||
"Information, comment and share @": "信息，评论和分享：",
|
||
"Infotext": "文本信息",
|
||
"Infotext is what this software calls the text that contains generation parameters and can be used to generate the same picture again.\nIt is displayed in UI below the image. To use infotext, paste it into the prompt and click the ↙️ paste button.": "文本信息 (生成信息) 是本项目称为包含生成参数的文本, 可用于再次生成相同的图像。\n它一般显示在 UI 中图像的下方。\n要使用此类文本, 请粘贴其到提示词输入框中，然后单击 ↙️ 按钮。",
|
||
"In FPS": "输入帧率",
|
||
"In Frame Count": "输入帧数",
|
||
"In \"Interpolate existing pics\" mode, FPS is determined *only* by output FPS slider. Audio will be added if requested even with slow-mo \"enabled\", as it does *nothing* in this mode.": "在‘插入已有图像’模式中，帧率仅由帧率设置滑块决定。音频将会加入，即使在慢动作模式启用情况下，且在此模式下什么都不会做。",
|
||
"Init": "初始化",
|
||
"initial": "初始化",
|
||
"Initial denoising strength": "初始去噪强度",
|
||
"Initial generated image number": "初始生成的图像编号",
|
||
"Initialization text": "初始化文字",
|
||
"Initialization text (negative)": "初始化文本（反向）",
|
||
"initialize extra networks": "初始化扩展模型",
|
||
"initialize shared": "初始化共享",
|
||
"Initial seed": "初始种子",
|
||
"initial startup": "初始化启动",
|
||
"Initiates extraction of video frames from your video_init_path to the inputframes folder. You only need to do this once and then you can change it to False and re-render": "从视频初始路径提取视频帧到输入帧文件夹。你只需要操作一次后关闭本选项，再重新渲染",
|
||
"Init image": "初始化图像",
|
||
"Init image box": "初始化图像输入框",
|
||
"Init image URL": "初始化图像链接",
|
||
"Init tab's strength slider should be greater than 0. Recommended value (.65 - .80).": "初始化选项卡的强度滑块应设置大于0，推荐设置为 (0.65 - 0.80) 。",
|
||
"Init Video": "初始化视频",
|
||
"In Keyframes tab, you can also set": "在关键帧选项卡, 可以设置",
|
||
"in <>, like <apple>, <hair>": "<>,比如 <apple>, <hair>",
|
||
"(in megapixels)": "(单位: 百万像素)",
|
||
"(in milliseconds)": "(单位: 毫秒)",
|
||
"Inner Fit (Scale to Fit)": "贴合内边 (放大以贴合)",
|
||
"InOutPaint": "向内向外绘制",
|
||
"inpaint": "修復",
|
||
"➠ Inpaint": "➠ 局部重绘",
|
||
"Inpaint": "局部重繪",
|
||
"Inpaint area": "修復區域",
|
||
"Inpaint Area(Override img2img Inpaint area)": "重绘区域（覆盖图生图的重绘区域）",
|
||
"Inpaint at full resolution 2nd": "全分辨率局部重绘",
|
||
"Inpaint at full resolution 3rd": "全分辨率局部重绘",
|
||
"Inpaint at full resolution 4th": "全分辨率局部重绘",
|
||
"Inpaint at full resolution 5th": "全分辨率局部重绘",
|
||
"Inpaint at full resolution padding, pixels 2nd": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 3rd": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 4th": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 5th": "预留像素",
|
||
"Inpaint batch mask directory (required for inpaint batch processing only)": "修補批次遮罩目錄（僅適用於批次處理修補功能）",
|
||
"Inpaint denoising strength": "局部重绘幅度",
|
||
"Inpaint denoising strength 10th": "局部重绘幅度",
|
||
"Inpaint denoising strength 2nd": "局部重绘幅度",
|
||
"Inpaint denoising strength 3rd": "局部重绘幅度",
|
||
"Inpaint denoising strength 4th": "局部重绘幅度",
|
||
"Inpaint denoising strength 5th": "局部重绘幅度",
|
||
"Inpaint denoising strength 6th": "局部重绘幅度",
|
||
"Inpaint denoising strength 7th": "局部重绘幅度",
|
||
"Inpaint denoising strength 8th": "局部重绘幅度",
|
||
"Inpaint denoising strength 9th": "局部重绘幅度",
|
||
"inpaint_global_harmonious": "inpaint_global_harmonious (重绘 - 全局融合算法)",
|
||
"inpaint height": "重绘高度",
|
||
"Inpaint+ Height": "重绘+ 高度",
|
||
"inpaint height 10th": "重绘高度",
|
||
"inpaint height 2nd": "重绘高度",
|
||
"inpaint height 3rd": "重绘高度",
|
||
"inpaint height 4th": "重绘高度",
|
||
"inpaint height 5th": "重绘高度",
|
||
"inpaint height 6th": "重绘高度",
|
||
"inpaint height 7th": "重绘高度",
|
||
"inpaint height 8th": "重绘高度",
|
||
"inpaint height 9th": "重绘高度",
|
||
"inpainting": "重绘",
|
||
"Inpainting": "重绘",
|
||
"Inpainting conditioning mask strength": "局部重繪時圖像調節的遮罩屏蔽強度",
|
||
"Inpainting Model ID": "重绘模型 ID",
|
||
"Inpainting Model ID webui": "webui 重绘模型 ID",
|
||
"Inpainting negative prompt use [gender] instead of men or woman": "使用 [性别] 作为反向提示词而不是简单的 ”man“ 或者 ”woman“",
|
||
"Inpainting Prompt": "重绘提示词",
|
||
"Inpainting prompt use [gender] instead of men or woman": "使用 [性别] 作为正向提示词而不是简单的 ”man“ 或者 ”woman“",
|
||
"Inpainting Sampler": "重绘采样方法",
|
||
"Inpainting seed": "重绘随机种子",
|
||
"Inpainting sends image to inpainting with a mask on face (once for each faces).": "重绘会将图像和面部蒙版发送到可上传蒙版的局部重绘 (每个面部一次)",
|
||
"Inpainting steps": "重绘步数",
|
||
"Inpainting webui": "webui 重绘",
|
||
"Inpaint mask blur": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 10th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 2nd": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 3rd": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 4th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 5th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 6th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 7th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 8th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 9th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask brush color": "重绘蒙版画笔颜色",
|
||
"Inpaint masked": "重繪遮罩內容",
|
||
"Inpaint+ mode guide": "重绘+ 模式指南",
|
||
"Inpaint not masked": "重繪非遮罩內容",
|
||
"inpaint_only": "inpaint_only (仅局部重绘)",
|
||
"inpaint_only+lama": "inpaint_only+lama (仅局部重绘 + 大型蒙版)",
|
||
"Inpaint only masked": "仅重绘蒙版内容",
|
||
"Inpaint only masked 10th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 2nd": "仅重绘蒙版内容",
|
||
"Inpaint only masked 3rd": "仅重绘蒙版内容",
|
||
"Inpaint only masked 4th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 5th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 7th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 8th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 9th": "仅重绘蒙版内容",
|
||
"Inpaint only masked padding, pixels": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 10th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 2nd": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 3rd": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 4th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 5th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 6th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 7th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 8th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 9th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint selection": "重绘选择区域",
|
||
"inpaint sketch": "修復草圖",
|
||
"➠ Inpaint sketch": "➠ 涂鸦重绘",
|
||
"Inpaint sketch": "修復素描",
|
||
"Inpaint sketch initial brush color": "涂鸦重绘初始画笔颜色",
|
||
"Inpaint upload": "修復上傳",
|
||
"inpaint width": "重绘宽度",
|
||
"Inpaint+ Width": "重绘+ 宽度",
|
||
"inpaint width 10th": "重绘宽度",
|
||
"inpaint width 2nd": "重绘宽度",
|
||
"inpaint width 3rd": "重绘宽度",
|
||
"inpaint width 4th": "重绘宽度",
|
||
"inpaint width 5th": "重绘宽度",
|
||
"inpaint width 6th": "重绘宽度",
|
||
"inpaint width 7th": "重绘宽度",
|
||
"inpaint width 8th": "重绘宽度",
|
||
"inpaint width 9th": "重绘宽度",
|
||
"(in pixels)": "(单位: 像素)",
|
||
"Input": "輸入",
|
||
"Input audio": "输入音频",
|
||
"Input directory": "輸入目錄",
|
||
"Input Directory": "輸入目錄",
|
||
"Input directory - See also settings tab.": "输入目录 - 也请查看设置选项",
|
||
"Input directory - To recurse use ** or */* in your glob; also check the settings tab.": "输入文件夹 - 在 glod 中用 ** 或 */* 来使用递归；也请查看设置选项卡",
|
||
"Input file path": "文件输入路径",
|
||
"Input Folder": "输入文件夹",
|
||
"Input image": "输入图像",
|
||
"Input Image": "输入图像",
|
||
"Input image here": "在此处输入图像",
|
||
"Input images directory": "輸入圖像目錄",
|
||
"Input Mesh (.ply | .obj)": "输入网格文件 (.ply | .obj)",
|
||
"Input <= Output": "输出图像 发送到 输入图像",
|
||
"Input path": "输入目录",
|
||
"Input Video": "输入视频",
|
||
"In queue...": "排队中……",
|
||
"In Res": "输入分辨率",
|
||
"(in sampling steps - show new live preview image every N sampling steps; -1 = only show after completion of batch)": "(每N个采样步骤更新一次实时预览图像; 设置为-1以在每批次完成后显示)",
|
||
"Insert after": "後綴插入",
|
||
"Insert [Author Name] & [Model Name] & [Model NameVersion Name] as sub folder options": "插入 [\\作者名称] & [\\模型名称] & [\\模型名称\\版本名称] 作为子文件夹选项",
|
||
"Insert before": "前綴插入",
|
||
"Insert [/Model Name] & [/Model Name/Version Name] as default sub folder options": "子文件夹路径默认插入 [/模型名称] 和 [/模型名称/版本名称]",
|
||
"Insert [Model Name] & [Model NameVersion Name] as sub folder options": "插入 [\\模型名称] & [\\模型名称\\版本名称] 作为子文件夹选项",
|
||
"Insert prompts at the": "将提示词插入到",
|
||
"Inspect": "检查",
|
||
"install": "安装",
|
||
"Install": "安裝",
|
||
"installation": null,
|
||
"installed": "已安裝",
|
||
"Installed": "已安裝",
|
||
"Install from URL": "從網址安裝",
|
||
"Installing...": "正在安装...",
|
||
"Instance prompt": "提示词实例",
|
||
"Instance Prompt": "實例提示詞",
|
||
"Instance prompt(Optional)": "提示词实例 (可选)",
|
||
"Instance Token": "實例名稱",
|
||
"Instead it will pick up all files in the upscale_me folder and upscale them with below settings.": "相对应的会用 \\upscale_me\\ 文件夹中的文件按照下列设置对它们进行放大。",
|
||
"Instead of generating random prompts from a template, combinatorial generation produces every possible prompt from the given string.\nThe prompt 'I {love|hate} {New York|Chicago} in {June|July|August}' will produce 12 variants in total.\n\nThe value of the 'Seed' field is only used for the first image. To change this, look for 'Fixed seed' in the 'Advanced options' section.": "使用組合產生而非從範本產生隨機提示，會從給定的字串中產生所有可能的提示。\n例如提示字串'I {love|hate} {New York|Chicago} in {June|July|August}'，會總共產生12種不同的提示。\n\n「Seed」欄位的值僅會用於生成第一張圖片。若要更改此值，請尋找「Advanced options」區塊中的「Fixed seed」選項。",
|
||
"instead of Python.": " 而不是 Python",
|
||
"instructs the handling of pixels outside the field of view as they come into the scene.": "选择进入场景的视场外像素的处理算法",
|
||
"instructs the run to start from a specified point": "指示运行从指定点开始",
|
||
"integrations": "集成功能",
|
||
"interactive splines and Bezier curves": "互動式的曲線和貝茲曲線進行關鍵幀的製作。",
|
||
"Intermediate files path": "临时文件路径",
|
||
"Intermediate results may look better than the end results. /! Intermediate results are cleaned after each run, save them elsewhere if you want to keep them.": "中间的结果可能比最终结果看起来更好。提示: 中间的结果在每次运行后都会被清理，如果你想保留它们，就把它们保存在其他地方",
|
||
"internal order": "內部順序",
|
||
"Interpolate existing Video/ Images": "插值已有的视频/图像",
|
||
"*Interpolate Pics*": "*插值图像*",
|
||
"Interpolate upscaled images, if available": "插值放大图像 (如可用)",
|
||
"*Interpolate Video*": "*插值视频*",
|
||
"Interpolation": "插值",
|
||
"interpolation method": "插值模式",
|
||
"Interpolation method": "插值算法",
|
||
"Interpolation Method": "插值方法",
|
||
"Interprocess communication strategy": "进程间通讯方式",
|
||
"Interp X": "插值次数 X",
|
||
"Interrogate": "反推",
|
||
"Interrogate\nCLIP": "CLIP\n反推提示詞",
|
||
"Interrogate CLIP - use CLIP neural network to create a text describing the image, and put it into the prompt field": "CLIP 反推 - 使用 CLIP 神经网络创建图像的文本描述，并且将其填入提示词字段中",
|
||
"Interrogate Deepbooru": "Deepbooru 反推",
|
||
"Interrogate\nDeepBooru": "DeepBooru\n反推提示詞",
|
||
"Interrogate DeepBooru - use DeepBooru neural network to create a text describing the image, and put it into the prompt field": "DeepBooru - 使用 DeepBooru 神经网络创建图像的文本描述，并且将其填入提示词字段中",
|
||
"Interrogate image": "反推图像",
|
||
"Interrogate: keep models in VRAM": "反推：将模型保留在显存中",
|
||
"Interrogate: num_beams for BLIP": "反推：BLIP 集束数量",
|
||
"Interrogate Options": "反推提示詞選項",
|
||
"Interrogate Result": "反推结果",
|
||
"Interrogate Selected Image": "反推所选图片",
|
||
"Interrogator": "反推",
|
||
"Interrogators": "反推算法",
|
||
"Interrogator Settings": "反推器设置",
|
||
"interrupt": "中止",
|
||
"Interrupt": "中止",
|
||
"Interrupting...": "正在中止...",
|
||
"Interrupting generation...": "正在中止生成...",
|
||
"Intervals": "訓練週期 / 間隔",
|
||
"In the filename, '%09d' represents the 9 counting numbers, For '20230124234916_000000001.png', use '20230124234916_%09d.png'": "在文件名中, '%09d' 代表9个计数数字, 对于 '20230124234916_000000001.png' , 使用 '20230124234916_%09d.png'",
|
||
"In the main tab, set the subject to humanoids": "在主菜单标签页, 设置主题为 humanoids (人形)",
|
||
"In the prefix prompt field then add for example: Art by artistname, 2 people": "然后在前缀提示词段中添加示例: Art by artistname, 2 people",
|
||
"In this case, a random number of artists between 1 and 3 is chosen.": "此例中，會從中隨機選 1 至 3 個藝術家",
|
||
"In this case, artist1 will be chosen twice as often as artist2.": "此例中，藝術家 1 將會比藝術家 2 高兩倍的機會被選中",
|
||
"(in tokens - for texts shorter than specified, if they don't fit into 75 token limit, move them to the next 75 token chunk)": "(Token 中短于指定长度的提示词, 如果它们不符合 75 Tokens 的上限, 则将他们移至下一个 75 Tokens 组中)",
|
||
"Inversion steps": "反转步数 (Steps)",
|
||
"Invert": "反相",
|
||
"Invert (black=near, white=far)": "反转（黑=近，白=远）",
|
||
"Invert colors": "反转颜色",
|
||
"Invert colors if your image has white background.": "对于白色背景图片请开启颜色反转。",
|
||
"Invert DepthMap": "反转深度图",
|
||
"Invert DepthMap (black=near, white=far)": "反转深度图（黑色=近，白色=远）",
|
||
"invert (from white bg & black line)": "invert (对白色背景黑色线条图像反相处理)",
|
||
"Invert Input Color": "反转输入颜色",
|
||
"Invert mask": "反转蒙版",
|
||
"Invert selection": "反向选择",
|
||
"Invert sort order": "反转排序顺序",
|
||
"Inverts the composite mask.": "对合成蒙版进行反相处理",
|
||
"ip-adapter_clip_sd15": "ip-adapter_clip_sd15 (图像提示词自适应控制 - CLIP - SD1.5)",
|
||
"ip-adapter_clip_sdxl": "ip-adapter_clip_sdxl (图像提示词自适应控制 - CLIP - SDXL)",
|
||
"ip-adapter_clip_sdxl_plus_vith": "ip-adapter_clip_sdxl_plus_vith(图像自适应提示词 - CLIP - SDXL - vit-h 增强模型)",
|
||
"IP-Adapter Model ID": "IP-Adapter 模型 ID",
|
||
"is also a good option, it makes compact math formulae for Deforum keyframes by selecting various waveforms.": "是一個不錯的選擇，它透過選擇不同的波形為 Deforum 關鍵幀生成簡潔的數學公式。",
|
||
"is a neural network that transforms a standard": " 是一种神经网络，可将标准的 ",
|
||
"is equivalent to": "等同於",
|
||
"is experimental functions and NO PROOF of effectiveness.": " 为实验性功能，不保证有效性。",
|
||
"Isometric Style": "Isometric Style (等距风格)",
|
||
"is SDXL": "是 SDXL 模型？",
|
||
"is set,": "已经设置数值，",
|
||
"Issue Tracker": "问题追踪",
|
||
"is the": " 是 ",
|
||
"is the current frame number.": " 是当前帧数序号",
|
||
"is the length of the video, in frames.": " 是视频的整体长度，用帧数来统计",
|
||
"iter": "迭代",
|
||
"Iterate seed every line": "每行輸入都換一個隨機種子",
|
||
"Iterations": "迭代次數",
|
||
"It is automatically set to No when adding, and it needs to be changed again": "添加后自动设置为 No，若有需要请手动调整",
|
||
"It takes time, just wait. Check console log for detail": "检查需要一段时间，请耐心等待。检查控制台日志以查看详情。",
|
||
"It takes time, just wait. Check console log for details": "需要时间，请耐心等待。检查控制台日志以查看细节",
|
||
"It will then recognize the body type and not generate it. It also recognizes the keyword wearing, and will not generate an outfit.": "然后，它将识别体型来避免生成对应体型。它同样能识别关键词 \"穿着\"，避免生成服装。",
|
||
"It will translate prompt from your native language into English. So, you can write prompt with your native language.": "这会将您输入的提示词翻译为英文。因此，您可以直接用母语输入提示词。",
|
||
"I want to preview GroundingDINO detection result and select the boxes I want.": "我想预览 GroundingDINO 的结果并选择我想要的箱体。",
|
||
"JavaScript aspect ratio buttons (1:1, 4:3, 16:9, 9:16, 21:9)": "前端纵横比按钮 (填入类似于 1:1, 4:3, 16:9, 9:16, 21:9 的纵横比)",
|
||
"Javascript logs": "Javascript 日志",
|
||
"JavaScript selection method": "前端选择样式",
|
||
"Jinja2 documentation.": "Jinja2 文件資料。",
|
||
"Jinja2 templates": "Jinja2 模板",
|
||
"Jinja2 templates are an expressive alternative to the standard syntax. See the Help section below for instructions.": "Jinja2 模板是標準語法富有表現力的一種替代品，相關說明參見下方幫助欄",
|
||
"Jinja2 templates are based on the Jinja2 template engine. For more information see the": "Jinja2 模板基於 Jinja2 模板引擎，更多訊息參考",
|
||
"Jinja2 templates is an experimental feature for advanced template generation. It is not recommended for general use unless you are comfortable with writing scripts.": "Jinja2 範本是一個用於進階範本產生的實驗性特性。如果不熟悉編寫指令碼，正常使用時不建議啟用",
|
||
"Jitter step:": "抖动步数: ",
|
||
"Jitter the seeds of sub-generations when doing a rolling generation (Still deterministic)": "在进行梯度放大倍数生成时, 对子代生成的随机种子进行抖动 (图像依旧可复现)",
|
||
"Join the": "加入我們",
|
||
"- Joints and Limbs": "- 关节和四肢",
|
||
"json path": "json 路径",
|
||
"JSON Validator": "JSON 校验器中检查",
|
||
"Judge": "鉴定",
|
||
"Just resize": "拉伸",
|
||
"Just Resize": "拉伸",
|
||
"Just resize (latent upscale)": "僅重新調整大小（潛在變數放大）",
|
||
"Kana Name": "网名",
|
||
"Keep": "保留",
|
||
"Keep -1 for seeds": "保持隨機種子為 -1",
|
||
"Keep at 1 for normal behavior.\nSet to different values to compound that many prompts together. My suggestion is to try 2 first.": "设置为 1 保持正常行为。\n设置其他数值来混合更多提示词。我的建议是先尝试设置为 2 。",
|
||
"Keep blank if you don't have mask": "如果没有遮罩, 请保持空白",
|
||
"Keep Imgs": "保留原图",
|
||
"Keep input image size": "維持輸入圖像尺寸",
|
||
"Keep interpolated images on disk": "保留插值图像在硬盘",
|
||
"Keep models in VRAM": "将模型保留在显存中",
|
||
"Keep occlusion edges": "保持边缘封闭",
|
||
"Keep original feet 🡢 keep_feet": "保留原图脚部 🡢 keep_feet",
|
||
"Keep original hands 🡢 keep_hands": "保留原图手部 🡢 keep_hands",
|
||
"keep original image before swapping": "变换前保存原始图像",
|
||
"Keep original image channels": "保持原始图片通道",
|
||
"Keep original size": "保持原始尺寸",
|
||
"Keep resolution": "保持解析度",
|
||
"Keep settings persistent upon relaunch of webui": "重启 webui 时保持持久性设置",
|
||
"(Keeps the page navigation always visible at the top, Requires UI reload)": "(保持页面导航栏在顶部保持可见, 需重载 UI )",
|
||
"Keep tag, ..": "保留标签, ..",
|
||
"Keep temp images": "保留临时图像",
|
||
"Keep the normalization layers of CLIP frozen during training. Advanced usage, may increase model performance and editability.": "训练过程中冻结 CLIP 的归一化层。可提高模型性能和可编辑性的高级用法。",
|
||
"Keep the Ratio": "保持图像比例",
|
||
"keep whatever was there originally": "保留原來的圖像，不進行預處理",
|
||
"Kept tag, ..": "保留标签, ..",
|
||
"Kernel schedule": "Kernel 调度计划",
|
||
"kernel size": "画笔大小",
|
||
"key for Fullscreen mode,": " 键进入全屏模式, ",
|
||
"Keyframes": "關鍵格",
|
||
"Keyframes: animation settings (animation mode, max frames, border)": "关键帧：动画设置（动画模式，最大帧数，边界）",
|
||
"Keyframes are output to ": "关键帧已输出到 ",
|
||
"Keyframes: coherence (color coherence & cadence)": "关键帧：一致性（颜色一致性和间隔）",
|
||
"Keyframes: depth warping": "关键帧：深度变形",
|
||
"Keyframes: generation settings (noise, strength, contrast, scale).": "关键帧：通用设置（噪点，强度，对比度，缩放）",
|
||
"Keyframes: motion parameters for 2D and 3D (angle, zoom, translation, rotation, perspective flip).": "关键帧：2D 和 3D 的运动参数（角度，缩放，变换，旋转，透视翻转）",
|
||
"key_max_gap: ": "最大关键帧间隔：",
|
||
"key_min_gap: ": "最小关键帧间隔：",
|
||
"keys : ": "关键帧：",
|
||
"key_th: ": "增量帧边缘阈值：",
|
||
"key to Reset zoom": " 键重置缩放",
|
||
"Keywords": "觸發提示詞",
|
||
"Kirigami": "Kirigami (日本剪纸)",
|
||
"kmeans": "聚类 (kmeans)",
|
||
"kmeans with dithering": "聚类 (kmeans) 且 抖动 (dithering)",
|
||
"❔ Known Issues": "❔ 已知问题",
|
||
"Kohya module:": "Kohya 模块类型:",
|
||
"Label": "標記",
|
||
"LAB is a more linear approach to mimic human perception of color space - a good default setting for most users.": "LAB 是一种更为线性的方法，可以模拟人类对色彩空间的感知——这是大多数用户的一个很好的默认设置。",
|
||
"ladder": "阶梯式",
|
||
"landscape": null,
|
||
"landscape - A landscape or a landscape with a building.": "landscape - 景观 - 一般景观或有建筑的景观。",
|
||
"(larger = more neural network layers affected; minor effect on performance)": "(数值越大意味着受影响的神经网络层越多; 对性能影响不大)",
|
||
"(larger = worse performance)": "(数值越大意味着性能越差)",
|
||
"Last Image": "上一张图片",
|
||
"Last message": "最后输出信息",
|
||
"Last Name": "姓",
|
||
"Latent Mirroring": "鏡像潛在變數",
|
||
"Latent Mirror mode": "鏡像潛在變數模式",
|
||
"Latent Mirror style": "潛在變數鏡像樣式",
|
||
"latent noise": "潛在變數噪點",
|
||
"latent nothing": "潛在變數數值零",
|
||
"Latent tile batch size": "潛在變數分塊批次數量",
|
||
"Latent tile height": "潛在變數分塊高度",
|
||
"Latent tile overlap": "潛在變數分塊重疊",
|
||
"Latent tile width": "潛在變數分塊寬度",
|
||
"Latent Upscale": "Latent Upscale (潜空间放大)",
|
||
"latest": "最新",
|
||
"Latitude": "纬度",
|
||
"launcher": "启动器",
|
||
"Layer1": "圖層 1",
|
||
"Layer1 mask blur": "圖層 1 遮罩模糊",
|
||
"Layer1 mask strength": "圖層 1 遮罩強度",
|
||
"Layer1 opacity": "圖層 1 透明度",
|
||
"Layer2": "圖層 2",
|
||
"Layer2 mask blur": "圖層 2 遮罩模糊",
|
||
"Layer2 mask strength": "圖層 2 遮罩強度",
|
||
"Layer2 opacity": "圖層 2 透明度",
|
||
"Layer3": "圖層 3",
|
||
"Layer3 mask blur": "圖層 3 遮罩模糊",
|
||
"Layer3 mask strength": "圖層 3 遮罩強度",
|
||
"Layer3 opacity": "圖層 3 透明度",
|
||
"Layer4": "圖層 4",
|
||
"Layer4 mask blur": "圖層 4 遮罩模糊",
|
||
"Layer4 mask strength": "圖層 4 遮罩強度",
|
||
"Layer4 opacity": "圖層 4 透明度",
|
||
"Layer5": "圖層 5",
|
||
"Layer5 mask blur": "圖層 5 遮罩模糊",
|
||
"Layer5 mask strength": "圖層 5 遮罩強度",
|
||
"Layer5 opacity": "圖層 5 透明度",
|
||
"Layer Divider": "图层分割工具",
|
||
"Layers": "圖層",
|
||
"Lazy": "保守",
|
||
"LDSR processing steps. Lower = faster": "LDSR 處理疊代步數。越少越快",
|
||
"Learning rate": "学习率",
|
||
"Learning Rate": "學習率",
|
||
"Learning Rate Scheduler": "學習率調度器",
|
||
"Learning Rate Warmup Steps": "學習率預熱步數",
|
||
"Learn More ➜": "了解详情 ➜",
|
||
"Leave blank to save images to the default path.": "留空以將圖像儲存到預設路徑",
|
||
"Leave blank to save images to the same path.": "留空以将图像保存到相同路径",
|
||
"Leave blank to use base model VAE.": "留空以使用基本模型 VAE。",
|
||
"Leave blank to use instance prompt. Optionally use [filewords] to base sample captions on instance images.": "留空以使用實例提示。可以選擇使用 [filewords] 以實例圖像為基礎生成樣本標題。",
|
||
"Leave empty for auto": "留空時自動生成",
|
||
"Leave empty for default main branch": "留空以使用默认分支",
|
||
"Leave empty for using generation negative prompt": "留空以使用图片生成反向提示词",
|
||
"Leave empty for using generation prompt": "留空以使用图片生成提示词",
|
||
"Leave empty to use img2img batch controlnet input directory": "留空使用img2img批處理controlnet輸入目錄",
|
||
"Leave empty to use input directory": "留空以使用輸入目錄",
|
||
"Leave empty to use the --listen address of the ComfyUI server": "留空以使用 ComfyUI 服务器的 --listen 监听地址",
|
||
"Leave empty to use the same name as model and put results into models/Unet-onnx directory": "留空以使用与 checkpoint 模型相同的名称, 并将转换出的模型放入 models/Unet-onnx 目录",
|
||
"Leave empty to use the same name as onnx and put results into models/Unet-trt directory": "留空以使用与 onnx 模型相同的名称, 并将转换出的模型放入 models/Unet-trt 目录",
|
||
"Leave the prompt field empty": "提示词段留空",
|
||
"Leave this alone unless you know what you are doing": "不明白这个选项的意思的话最好不要动",
|
||
"left": "左",
|
||
"Left click the image to add one positive point (black dot). Right click the image to add one negative point (red dot). Left click the point to remove it.": "左键点击图像添加一个黑色的正向标记点（想提取的部分）。右键点击图像添加一个红色的反向标记点（不想提取的部分）。左键再次点击可以删除标记点。",
|
||
"left-right": "左 - 右",
|
||
"Left/Right Balance": "左/右平衡",
|
||
"Legacy colormatch": "经典颜色匹配",
|
||
"Legacy hash": "舊雜湊值",
|
||
"Legend of Zelda": "Legend of Zelda (塞尔达传说)",
|
||
"Leg Length": "腿部长度",
|
||
"Len": "长度",
|
||
"Length": "长度",
|
||
"Lens distortion (Fisheye)": "镜头失真 (鱼眼)",
|
||
"Lerp": "线性插值",
|
||
"lets you only match every N frames": " 可以仅在每渲染 N 帧校正一次颜色",
|
||
"(lets you override the noise schedule for k-diffusion samplers; choosing Automatic disables the three parameters below)": "(覆盖 k-diffusion 采样方法的噪声调度器; 选择自动会禁用以下的三个参数)",
|
||
"Let the Dice roll": "随机融合",
|
||
"libraries": "库",
|
||
"License": "许可协议",
|
||
"Licenses": "授權",
|
||
"light": null,
|
||
"LightDiffusionFlow File": "LightDiffusionFlow 文件",
|
||
"lighten": "變亮",
|
||
"👍 Like": "👍 喜欢",
|
||
"Liked images": "喜欢的图片",
|
||
"like here": "链接",
|
||
"👍 Likes": "👍 喜欢的",
|
||
"Limb Width": "四肢宽度",
|
||
"Limit Jinja prompts: Limit the number of prompts to batch_count * batch_size. The default is to generate batch_count * batch_size * number of prompts generated by Jinja": "限制 Jinja 提示词数量：限制提示词数量为 总批次数 * 单批数量 (batch count * batch size)。默认情况下，生成数量为 = 总批次数 * 单批数量 * Jinja 生成的提示词数量",
|
||
"Limit the maximum number of prompts generated. 0 (default) will generate all images. Useful to prevent an unexpected combinatorial explosion.": "限制產生的提示詞數量的上限，預設為0，表示產生所有圖像。這個選項可以防止過多的組合。",
|
||
"Linear": "線性（Linear）",
|
||
"linear_burn": "線性加深",
|
||
"linear_dodge": "線性加亮",
|
||
"linear_light": "線性光線",
|
||
"Lineart": "Lineart (线稿)",
|
||
"Line Art": "Line Art (线条艺术)",
|
||
"lineart_anime": "lineart_anime (动漫线稿提取)",
|
||
"lineart_anime_denoise": "lineart_anime_denoise (动漫线稿提取 - 去噪)",
|
||
"lineart_coarse": "lineart_coarse (粗略线稿提取)",
|
||
"lineart_realistic": "lineart_realistic (写实线稿提取)",
|
||
"lineart_standard": "lineart_standard (标准线稿提取 - 白底黑线)",
|
||
"lineart_standard (form white bg & black line)": "lineart_standard (标准线稿提取 - 白底黑线)",
|
||
"lineart_standard (from white bg & black line)": "lineart_standard (标准线稿提取 - 白底黑线反色)",
|
||
"line drawing": "line drawing (线描)",
|
||
"Line Feed": "Line Feed (换行符)",
|
||
"Link to DeepL": "Deepl 在线翻译链接",
|
||
"Link to online results": "链接到在线结果",
|
||
"list extensions": "列出扩展",
|
||
"List loaded embeddings": "获取嵌入式模型列表",
|
||
"list localizations": "列出本地化",
|
||
"List of active tabs (separated by commas). Available options are txt2img, img2img, txt2img-grids, img2img-grids, Extras, Favorites, Others, All, Maintenance. Custom folders are also supported by specifying their path.": "激活的图像保存目录标签 (用逗号分隔). 可用的标签有, 文生图(txt2img),图生图(img2img), 文生图-网格(txt2img-grids), 图生图-网格(img2img-grids), 后期处理(Extras), 收藏夹(Favorites), 其他(Others), 全部(All), 维护(Maintenance)。 也可以通过指定文件目录来自定义目录标签.",
|
||
"List of active tabs (separated by commas). Available options are txt2img, img2img, txt2img-grids, img2img-grids, Extras, Favorites, Others. Custom folders are also supported by specifying their path.": "激活的图像保存目录标签 (用逗号分隔). 可用的标签有, 文生图(txt2img),图生图(img2img), 文生图-网格(txt2img-grids), 图生图-网格(img2img-grids), 后期处理(Extras), 收藏夹(Favorites), 其他(Others). 也可以通过指定文件目录来自定义目录标签.",
|
||
"List of model names (with file extension) or their hashes to use as black/whitelist, separated by commas.": "要用作黑名單/白名單的模型名稱清單（包括檔案副檔名）或其雜湊值，用逗號分隔。",
|
||
"List of prompt inputs": "提示詞輸入列表",
|
||
"List of setting names, separated by commas, for settings that should go to the quick access bar at the top, rather than the usual setting tab. See modules/shared.py for setting names. Requires restarting to apply.": "設定項名稱列表，以逗號（,）分隔，該設定會移動到頂部的快速存取列，而不是預設的設定頁籤。有關設定名稱，請參見 modules/shared.py。需要儲存設定並重新啟動才能套用",
|
||
"list SD models": "列出 SD 模型",
|
||
"Literals": "字面值",
|
||
"Live preview display period": "实时预览显示周期",
|
||
"Live preview file format": "实时预览文件格式",
|
||
"Live preview method": "实时预览模式",
|
||
"Live previews": "即時預覽",
|
||
"Live Previews": "实时预览",
|
||
"Live preview subject": "實時預覽主題",
|
||
"⚙️ Load": "⚙️ 加载",
|
||
"Load": "載入",
|
||
"Load all installed models": "加载所有已安装的模型",
|
||
"Load All Settings": "载入所有设置",
|
||
"Load an image.": "加载一张图片",
|
||
"Load BG": "加载背景图",
|
||
"Load caption from filename if no text file exists": "当文本文件不存在时，从文件名中加载描述",
|
||
"Load CLIP preprocessor model on CPU": "在 CPU 上加载 CLIP 预处理器模型",
|
||
"Load ComfyUI iframes through a reverse proxy (requires reload UI. Needs --api. Default is on if webui is remote)": "通过反向代理加载 ComfyUI 嵌入页面 (需要重载前端; 需要 --api; 对于可远程访问的 webui 默认启用)",
|
||
"Load data from file": "从文件加载数据",
|
||
"Loaded checkpoint is a SDXL checkpoint": "已加载大模型是 SDXL 模型?",
|
||
"Loaded Model:": "載入模型：",
|
||
"Load from:": "載入自",
|
||
"Load from JSON": "從 JSON 載入",
|
||
"Load from subdirectories": "从子目录中加载",
|
||
"load_history": "加载历史记录",
|
||
"Loading...": "载入中...",
|
||
"Load model": "加载模型",
|
||
"Load models/files in hidden directories": "加载隐藏目录中的模型/文件",
|
||
"Load models using stream loading method": "使用流式模型加载方法",
|
||
"Load Only": "仅加载",
|
||
"Load Params": "载入参数",
|
||
"Load preset": "加载预设",
|
||
"Load Preset": "加载预设",
|
||
"Load results": "載入結果",
|
||
"Load Romdom preset": "随机加载预设",
|
||
"Load & Save": "加载 & 保存",
|
||
"Load Scene": "加载场景",
|
||
"load scripts": "加载脚本",
|
||
"Load SD checkpoint to VRAM from RAM": "从内存中加载 SD 模型到显存中",
|
||
"Load Settings": "載入設定",
|
||
"Load settings from:": "配置加载自: ",
|
||
"Load trigger words from Dreambooth model": "从 Dreambooth 模型中加载触发词",
|
||
"load upscalers": "加载放大算法",
|
||
"Load Video Settings": "载入视频设置",
|
||
"Local": "本地",
|
||
"Local directory name": "本地目錄名稱",
|
||
"localization": "本地化",
|
||
"Localization": "本地化",
|
||
"Localization file (Please leave `User interface` - `Localization` as None)": "本地化翻譯（請將使用者介面下的本地化翻譯設為無）",
|
||
"Localization: refresh": "本地化: 刷新",
|
||
"Localization (requires restart)": "本地化翻译（需要重启）",
|
||
"Location": "FFmpeg 所在位置",
|
||
"Lock current settings": "锁定当前设置",
|
||
"(LoCon requires SD-WebUI v1.5 or higher, DoRA requires v1.9 or higher)": "(LoCon 需要 SD-WebUI 版本为 v1.5 或更高, DoRA 需要 v1.9 或更高)",
|
||
"Log": "日志",
|
||
"Log directory": "日誌目錄",
|
||
"Logo": "图标",
|
||
"Long Exposure": "Long Exposure (长曝光)",
|
||
"Longitude": "经度",
|
||
"Loop": "循环",
|
||
"Loopback": "回送",
|
||
"[Loopback] Automatically send generated images to this ControlNet unit": "[Loopback] 自動將生成的圖像發送回此 ControlNet",
|
||
"LoopBack mode": "回送模式",
|
||
"Loopback option": "回送选项",
|
||
"Loopback source": "回送源",
|
||
"Looping recommendations:": "循环设置建议：",
|
||
"Loops": "疊代次數",
|
||
"Loops:": "循环次数：",
|
||
"LoRA Block Weight": "LoRA 區塊權重",
|
||
"LoRA directory (if not default)": "LoRA 模型目录 (如非默认)",
|
||
"LoRA in negative textencoder": "反向提示词中 LoRA 文本编码器权重",
|
||
"LoRA in negative U-net": "反向提示词中 LoRA 的 U-net 权重",
|
||
"LoRA Model": "LoRA 模型",
|
||
"LoRA model name filter": "LoRA 模型名稱過濾器",
|
||
"Lora multiplier": "Lora 强度倍率",
|
||
"Lora/Networks: use old method that takes longer when you have multiple Loras active and produces same results as kohya-ss/sd-webui-additional-networks extension": "对于 Lora 等模型: 使用旧的加载方法，当多个 Lora 激活时需要更长的时间，并且可以生成与 kohya-ss/sd-webui-additional-networks 扩展相同的结果",
|
||
"Lora not found warning in console": "未找到 Lora 时在控制台显示警告",
|
||
"Lora not found warning popup in webui": "未找到 Lora 时在 webui 弹出警告窗口",
|
||
"LoRA prompt helper": "LoRA 提示词助手",
|
||
"Lo RA Prompt Helper": "LoRA 提示词助手",
|
||
"LoRA use buggy requires grad": "LoRA 启用错误梯度需求",
|
||
"Lora: use old method that takes longer when you have multiple Loras active and produces same results as kohya-ss/sd-webui-additional-networks extension": "Lora: 使用旧的加载方法，当多个 Lora 激活时需要更长的时间，并且可以生成与 kohya-ss/sd-webui-additional-networks 扩展相同的结果",
|
||
"low contrast": "low contrast (低对比度)",
|
||
"Lower Leg": "小腿长度",
|
||
"Lower limit for X": "X 值下限",
|
||
"Low fps": "低帧率",
|
||
"Lowpoly": "Low Poly (低多边形)",
|
||
"Low res only": "仅低分辨率",
|
||
"(Low values = visible seam)": "(数值越低=接缝越明显)",
|
||
"Low VRAM": "低 VRAM 模式",
|
||
"Low VRAM (8GB or below)": "低显存 (8 GB 以下) 模式",
|
||
"luminism": null,
|
||
"LyCORIS directory (if not default)": "LyCORIS 模型目录 (如非默认)",
|
||
"M00": "中间层",
|
||
"M_A_00": "模型 A 中间层",
|
||
"Made by": "製作者：",
|
||
"Made by deforum.github.io, port for AUTOMATIC1111's webui maintained by kabachuha": "由 deforum.github.io 制作，AUTOMATIC1111 的 webui 移植版本由 kabachuha 维护",
|
||
"Magenta | Green": "洋红色 | 绿色",
|
||
"magical realism": null,
|
||
"Magic prompt": "魔法提示詞",
|
||
"Magic Prompt adds interesting modifiers to your prompt for a little bit of extra spice.\nThe first time you use it, the MagicPrompt model is downloaded so be patient.\nIf you're running low on VRAM, you might get a CUDA error.": "魔法提示詞在提示詞中加入有趣的修飾，額外增添趣味。\n首次使用時會下載 MagicPrompt 模型，請耐心等待。\n在低 VRAM 情況下可能會導致 CUDA 報錯。",
|
||
"Magic Prompt batch size (higher is faster but uses more memory)": "魔法提示词单批数量 (更高的数值会更快但会使用更多内存)",
|
||
"Magic prompt blocklist regex": "魔法提示詞黑名單。",
|
||
"Magic prompt creativity": "魔法提示詞創意",
|
||
"Magic prompt model": "魔法提示詞模型",
|
||
"Main": "主菜单",
|
||
"mainly allows using more than 200 steps. otherwise, it's a mirror-like param of 'strength schedule'": "主要用于允许使用大于 200 的迭代步数。不然的话其实只是近似于强度调度计划的一个参数",
|
||
"mainly allows using more than 200 steps. Otherwise, it's a mirror-like param of 'strength schedule'": "主要为了允许使用超过 200 的迭代步数。否则的话本选项其实约等于另一个叫 ‘强度调度计划’ 的参数选项",
|
||
"Main menu position": "主菜单位置",
|
||
"Main Settings": "主设置",
|
||
"Main Splitting": "主分割方法",
|
||
"Maintenance": "維護",
|
||
"Maji Merger": "Maji 融合",
|
||
"Make a backup copy of the model being edited when saving its metadata.": "儲存中繼資料時，備份正在編輯的模型",
|
||
"Make an attempt to produce a picture similar to what would have been produced with same seed at specified resolution": "在相同隨機種子但不同解析度的情況下，嘗試生成與指定解析度的生成結果相似的圖片",
|
||
"Make GIF": "制作 GIF",
|
||
"make gif in addition to the video/s": "除视频外额外制作 GIF",
|
||
"make GIF in addition to the video/s": "除视频外额外制作 GIF",
|
||
"Make Hires. fix+ run before any other extensions (will reload WebUI)": "使 高分辨率修复PLUS 在其他所有插件前执行 (勾选后会立刻重载WebUI)",
|
||
"Make Images": "制作图像",
|
||
"Make K-diffusion samplers produce same images in a batch as when making a single image": "使 K-diffusion 取樣器批量生成與生成單個圖像時，產出相同的圖像",
|
||
"Make LoRA (A-B)": "制作差分 LoRA (A-B)",
|
||
"Make LoRA (alpha * A - beta * B)": "制作差分 LoRA (α × A - β × B)",
|
||
"(makes interrupts faster)": "(使中断处理更快速)",
|
||
"(makes it possible to make model to pay (more:1.1) or (less:0.9) attention to text when you use the syntax in prompt; None: disable the mechanism entirely and treat (:.1.1) as literal characters, Ignore: treat all empasised words as if they have no emphasis, Original: the orginal emphasis implementation, No norm: same as orginal, but without normalization (seems to work better for SDXL))": "(使模型在提示词中使用语法时可以对文本进行 (更多:1.1) 或 (更少:0.9) 强调; 无：完全禁用该机制并将 (:.1.1) 视作文字字符, 忽略: 将所有强调的提示词视为没有强调, Original: 原始强调实现, No norm: 与原始相同, 但没有规范化 (似乎更适合 SDXL))",
|
||
"(makes it possible to make model to pay (more:1.1) or (less:0.9) attention to text when you use the syntax in prompt; None: disable the mechanism entirely and treat (:.1.1) as literal characters, Ignore: treat all empasised words as if they have no emphasis, Original: the original emphasis implementation, No norm: same as original, but without normalization (seems to work better for SDXL))": "(使模型在提示词中使用语法时可以对文本进行 (更多:1.1) 或 (更少:0.9) 强调; 无：完全禁用该机制并将 (:.1.1) 视作文字字符, 忽略: 将所有强调的提示词视为没有强调, Original: 原始强调实现, No norm: 与原始相同, 但没有规范化 (似乎更适合 SDXL))",
|
||
"Make your changes, press 'View changes' to review the changed default values,": "修改后通过点击 '查看更改' 来复查修改后的默认设置数值。\n然后点击 \"应用\" 把更改后的数值写入到 webui 根目录中的 ui-config.json文件中。",
|
||
"Make your choices, adjust your settings, set a name, save. To edit a prior choice, select from dropdown and overwrite.": "做出选择，调整设置，设置名称，保存。要编辑先前的选择，请从下拉列表中选择并覆盖。",
|
||
"Make Zip when Save?": "保存时创建 zip 压缩文件?",
|
||
"MALE": "男性",
|
||
"Manage Extensions": "管理扩展",
|
||
"Manage wildcards for Dynamic Prompts": "管理動態提示詞擴充功能的萬用字元",
|
||
"manga": null,
|
||
"manifest for your animation (leave blank to ignore).": " 对应你动画的清单 (留空以忽略)",
|
||
"manipulations": "操作",
|
||
"📘 Manual": "📘 使用手册",
|
||
"Manual Class Generation": "手动生成类别",
|
||
"Manual install": "手动安装",
|
||
"mask": "蒙版",
|
||
"Mask": "遮罩",
|
||
"Mask area Only": "仅重绘蒙版区域",
|
||
"Mask blur": "遮罩模糊",
|
||
"Mask Blur": "蒙版边缘模糊度",
|
||
"Mask Blur Kernel Size": "蒙版模糊内核大小",
|
||
"Mask Blur Kernel Size(GaussianBlur)": "蒙版模糊内核大小（高斯模糊）",
|
||
"Mask Blur Kernel Size(MedianBlur)": "蒙版模糊内核大小（中值模糊）",
|
||
"Mask brightness adjust": "蒙版亮度调整",
|
||
"Mask by Category": "按分类创建蒙版",
|
||
"mask content ratio": "蒙版内容比例",
|
||
"Mask contrast adjust": "蒙版对比度调整",
|
||
"Mask contrast schedule is from 0-255. Normal is 1. Affects all masks.": "蒙版对比度调度从 0 到 255。正常为1, 影响所有蒙版",
|
||
"Mask directory": "遮罩图像目录",
|
||
"Masked area width (px)": "蒙版区域宽度 (px)",
|
||
"Masked content": "遮罩內容",
|
||
"Mask erosion (-) / dilation (+)": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 10th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 2nd": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 3rd": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 4th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 5th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 6th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 7th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 8th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 9th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask file": "蒙版文件",
|
||
"Mask fill": "蒙版填充",
|
||
"Mask for ControlNet Inpaint": "用于 ControlNet 重绘的蒙版",
|
||
"mask image:": "遮罩圖像：",
|
||
"Mask image": "蒙版图像",
|
||
"Masking Method": "蒙版方式",
|
||
"Masking method 🡢 mask_method": "蒙版方法 🡢 mask_method",
|
||
"Mask Init": "蒙版初始化",
|
||
"Mask max area ratio": "蒙版区域最大比率",
|
||
"Mask max area ratio 10th": "蒙版区域最大比率",
|
||
"Mask max area ratio 2nd": "蒙版区域最大比率",
|
||
"Mask max area ratio 3rd": "蒙版区域最大比率",
|
||
"Mask max area ratio 4th": "蒙版区域最大比率",
|
||
"Mask max area ratio 5th": "蒙版区域最大比率",
|
||
"Mask max area ratio 6th": "蒙版区域最大比率",
|
||
"Mask max area ratio 7th": "蒙版区域最大比率",
|
||
"Mask max area ratio 8th": "蒙版区域最大比率",
|
||
"Mask max area ratio 9th": "蒙版区域最大比率",
|
||
"Mask merge mode": "蒙版合并模式",
|
||
"Mask merge mode 10th": "蒙版合并模式",
|
||
"Mask merge mode 2nd": "蒙版合并模式",
|
||
"Mask merge mode 3rd": "蒙版合并模式",
|
||
"Mask merge mode 4th": "蒙版合并模式",
|
||
"Mask merge mode 5th": "蒙版合并模式",
|
||
"Mask merge mode 6th": "蒙版合并模式",
|
||
"Mask merge mode 7th": "蒙版合并模式",
|
||
"Mask merge mode 8th": "蒙版合并模式",
|
||
"Mask merge mode 9th": "蒙版合并模式",
|
||
"Mask min area ratio": "蒙版区域最小比率",
|
||
"Mask min area ratio 10th": "蒙版区域最小比率",
|
||
"Mask min area ratio 2nd": "蒙版区域最小比率",
|
||
"Mask min area ratio 3rd": "蒙版区域最小比率",
|
||
"Mask min area ratio 4th": "蒙版区域最小比率",
|
||
"Mask min area ratio 5th": "蒙版区域最小比率",
|
||
"Mask min area ratio 6th": "蒙版区域最小比率",
|
||
"Mask min area ratio 7th": "蒙版区域最小比率",
|
||
"Mask min area ratio 8th": "蒙版区域最小比率",
|
||
"Mask min area ratio 9th": "蒙版区域最小比率",
|
||
"Mask mode": "遮罩模式",
|
||
"Mask Mode": "蒙版模式",
|
||
"Mask Mode(Override img2img Mask mode)": "蒙版模式（覆盖图生图的蒙版模式）",
|
||
"Mask only": "仅蒙版",
|
||
"Mask only the top k largest (0 to disable)": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask only the top k largest (0 to disable) 10th": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask only the top k largest (0 to disable) 2nd": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask only the top k largest (0 to disable) 3rd": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask only the top k largest (0 to disable) 4th": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask only the top k largest (0 to disable) 5th": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask only the top k largest (0 to disable) 6th": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask only the top k largest (0 to disable) 7th": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask only the top k largest (0 to disable) 8th": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask only the top k largest (0 to disable) 9th": "仅处理最大的前 k 个蒙版区域 (0 = 禁用)",
|
||
"Mask option": "蒙版选项",
|
||
"Mask overlay blur": "蒙版覆盖模糊度",
|
||
"Mask precision 🡢 mask_precision": "蒙版精度 🡢 mask_precision",
|
||
"Mask Preprocessing": "蒙版处理",
|
||
"Mask schedule": "蒙版调度计划",
|
||
"Mask Setting": "蒙版设置",
|
||
"🎭 Mask Settings": "🎭 蒙版设置",
|
||
"masks from files: in [], like [mask1.png]": "从文件中获取蒙版:[] ，比如 [mask1.png]",
|
||
"Mask size": "蒙版尺寸",
|
||
"Mask source": "蒙版来源",
|
||
"Mask Target (e.g., girl, cats)": "蒙版目标（如 girl, cats）",
|
||
"Mask Threshold": "蒙版阈值",
|
||
"Mask transparency": "遮罩透明度",
|
||
"Mask Upload": "上传蒙版",
|
||
"Mask x(→) offset": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 10th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 2nd": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 3rd": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 4th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 5th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 6th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 7th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 8th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 9th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask y(↑) offset": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 10th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 2nd": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 3rd": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 4th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 5th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 6th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 7th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 8th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 9th": "蒙版 Y 轴 (↑) 偏移",
|
||
"(Match initial noise to official SDXL implementation - only useful for reproducing images)": "(将初始噪声和官方 SDXL 实现相匹配 - 仅对复现图像有用)",
|
||
"Match input size": "匹配输入图尺寸",
|
||
"Match net size to input size": "匹配原图尺寸",
|
||
"Matrix": "矩阵",
|
||
"Matrix mode guide": "矩阵模式指南",
|
||
"Max": "最大值",
|
||
"Max additional denoise": "最大额外去燥",
|
||
"Max Batch Count": "最大批次數量",
|
||
"Max batch-size": "最大单批数量",
|
||
"Max Crop Size": "最大修复尺寸",
|
||
"Max faces units (requires restart)": "最大面部单元数量 (需要重启)",
|
||
"Max. feedback images": "最大反馈图片数",
|
||
"max frames": "最大帧数",
|
||
"max_frames": "最大帧数",
|
||
"Max frames": "最大幀數量",
|
||
"Max generations (0 = all combinations - the batch count value is ignored)": "最大產生數（0 = 所有組合 - 忽略批次數值）",
|
||
"Max height": "最大高度",
|
||
"Max Image Size": "最大圖像尺寸",
|
||
"Maximize area": "最大化面積",
|
||
"Maximum aesthetic_score": "最大美学评分",
|
||
"Maximum attention": "最大注意力",
|
||
"Maximum batch size": "最大单批数量",
|
||
"Maximum dimension default": "默认最大尺寸",
|
||
"Maximum execution time (seconds)": "最大执行时间(以秒为单位)",
|
||
"Maximum height": "最大高度",
|
||
"Maximum Image Height:": "图片最大高度",
|
||
"Maximum image size": "最大图像尺寸",
|
||
"Maximum image size, in megapixels": "上述选项的最大图像尺寸，单位：百万像素",
|
||
"Maximum Image Width:": "图片最大宽度：",
|
||
"Maximum Image Width/Height:": "图片最大宽度/高度：",
|
||
"Maximum keyframe gap": "最大关键帧间隔",
|
||
"Maximum Merge models": "最大可合并模型数",
|
||
"Maximum number of checkpoints loaded at the same time": "Stable Diffusion 模型可同时加载的最大数量",
|
||
"Maximum number of faces to detect": "检测的最大人脸数量",
|
||
"Maximum number of images in upscaling cache": "放大快取中圖像的最大數量",
|
||
"Maximum number of tags to be shown in the UI": "UI 能显示的最大标签数量",
|
||
"Maximum number of tokens after merging (lower improves VRAM usage)": "合并后允许的最大词元数量 (值越低使用越少显存)",
|
||
"Maximum prompt token count": "最大提示词词元长度",
|
||
"Maximum ranking": "最高评分",
|
||
"Maximum results": "最大結果",
|
||
"Maximum score": "最高美学评分",
|
||
"Maximum steps fraction to mirror at": "鏡像干涉止步於總疊代步數的",
|
||
"Maximum token length to respect. You probably want to leave this at 75.": "听从的最大词元长度。也许有人想保持本选项数值为 75 。",
|
||
"Maximum width": "最大宽度",
|
||
"Max key frames": "最大关键帧数",
|
||
"Max Length": "最大长度",
|
||
"Max magic prompt length": "魔法提示詞最大長度",
|
||
"Max models": "最大模型数量",
|
||
"Max number of dataset folders to show": "最多顯示幾個數據集資料夾",
|
||
"Max number of top tags to show": "最多顯示幾個常用標記",
|
||
"Max Pixels": "最大尺寸",
|
||
"Max prompt token count": "最大提示词词元计数",
|
||
"Max prompt words for [prompt_words] pattern": "[prompt_words] 格式的最大提示詞數量",
|
||
"Max Res": "最大解析度",
|
||
"Max Resolution": "最高解析度",
|
||
"Max resolution of temporary files": "临时文件最大分辨率",
|
||
"Max side length": "最大边长",
|
||
"Max steps": "最大疊代步數",
|
||
"Max Token Length": "最大標記長度",
|
||
"Max. weight": "最高权重",
|
||
"Max width": "最大宽度",
|
||
"M_B_00": "模型 B 中间层",
|
||
"MBW": "分块设置权重(MBW)",
|
||
"MBW Each": "A/B 模型分别分块设置权重 (MBW Each)",
|
||
"mbw weights": "分块权重",
|
||
"mediapipe_face": "mediapipe_face (脸部边缘检测)",
|
||
"medium": "中速",
|
||
"melanin": null,
|
||
"Memo": "备注",
|
||
"Memory": "内存",
|
||
"Memory Attention": "記憶體注意力",
|
||
"Memory optimization": "显存优化选项",
|
||
"Memory usage": "内存使用量",
|
||
"Merge": "合併",
|
||
"Merge!": "融合",
|
||
"merge and apply": "合并后应用",
|
||
"Merge and gen": "融合并生成",
|
||
"Merge And Gen": "融合并生成",
|
||
"Merge and Invert": "合并且反相",
|
||
"Merge and save": "融合并保存",
|
||
"Merge Block Weighted": "合併塊加權",
|
||
"Merge Block Weights": "分块权重融合",
|
||
"Merge&Gen": "融合并生成",
|
||
"Merge LoRAs": "合并 LoRA",
|
||
"Merge mode": "合并模式",
|
||
"Merge Mode": "融合算法",
|
||
"Merge Model B": "与模型 B 融合",
|
||
"Merge models and load it for generation": "融合模型并加载它生成图像",
|
||
"Merge multiple models and load it for image generation.": "融合多个模型后加载它生成图像",
|
||
"Merge to Checkpoint": "合并到大模型",
|
||
"Message": "信息",
|
||
"messy": null,
|
||
"Metadata": "元数据",
|
||
"Metadata in JSON format": "JSON 格式元数据",
|
||
"Metadata to show in XY-Grid label for Model axes, comma-separated (example: \"ss_learning_rate, ss_num_epochs\")": "顯示於 X/Y 圖表的中繼資料，以逗號分隔（例如：\"ss_learning_rate, ss_num_epochs\"）",
|
||
"Metadeta": "元数据",
|
||
"Method": "方案",
|
||
"(method to decode latent to image)": "(把潜变量解码为图像的方法)",
|
||
"(method to encode image to latent (use in img2img, hires-fix or inpaint mask))": "(把图像编码为潜变量的方法 (在图生图, 高分辨率修复或重绘蒙版中启用))",
|
||
"MiDaS weight (vid2depth)": "MiDaS 权重 (vid2depth)",
|
||
"Middle Name": "中间名",
|
||
"Min": "最小值",
|
||
"Min batch-size": "最小单批数量",
|
||
"Minecraft": "Minecraft (我的世界)",
|
||
"Min height": "最小高度",
|
||
"(minimal change in the generated picture)": "(对生成的图像影响最小)",
|
||
"Minimalist": "Minimalist (极简)",
|
||
"Minimize error": "最小化誤差",
|
||
"minimum aesthetic_score": "最小美學分數",
|
||
"Minimum aesthetic_score": "最小美学评分",
|
||
"Minimum attention": "最小注意力",
|
||
"Minimum batch size": "最小单批数量",
|
||
"Minimum dimension default": "默认最小尺寸",
|
||
"Minimum feedback strength at every diffusion step.": "不同迭代步数下的最小反馈强度",
|
||
"Minimum height": "最小高度",
|
||
"Minimum keyframe gap": "最小关键帧间隔",
|
||
"Minimum lighting ratio": "最小照明比率",
|
||
"Minimum number of pages per load": "每次載入的最小頁數",
|
||
"Minimum Prior Loss Weight": "最小先前損失權重",
|
||
"Minimum prompt token count": "最小提示词词元长度",
|
||
"Minimum ranking": "最低评分",
|
||
"Minimum score": "最低美学评分",
|
||
"Minimum steps": "最小迭代步数",
|
||
"Minimum width": "最小宽度",
|
||
"min_mask_region_area": "最小蒙版面积",
|
||
"Min-max": "最低 - 最高",
|
||
"Min prompt token count": "最小提示词词元计数",
|
||
"Min reference similarity": "最小参考相似度",
|
||
"Min similarity": "最小相似度",
|
||
"Min. strength": "最小强度",
|
||
"Min tag fraction in batch and interrogations": "单次或批量反推时的最小标签评分",
|
||
"Min. weight": "最低权重",
|
||
"Min width": "最小宽度",
|
||
"Mirror webcam": "镜像网络摄像头",
|
||
"Miscellaneous": "雜項",
|
||
"missing metadata": "缺少中繼資料",
|
||
"Mixed": "混合",
|
||
"Mixed Precision": "混合精度",
|
||
"Mixed precision (If your graphics card supports bf16 better)": "混合精度训练（若显卡支持，则 bf16 更佳）",
|
||
"MLDanbooru Tagger": "ML-Danbooru 标签器",
|
||
"mlsd": "mlsd (M-LSD 直线线条检测)",
|
||
"MLSD": "MLSD (直线)",
|
||
"MLSD Distance Threshold": "MLSD 距離閾值 (长度)",
|
||
"MLSD Value Threshold": "MLSD 值閾值 (强度)",
|
||
"Mobile Phone": "移动电话",
|
||
"mode": "模式",
|
||
"Mode": "模式",
|
||
"model": "模型",
|
||
"model.": " 模型",
|
||
"Model": "模型",
|
||
"Model:": "模型: ",
|
||
"Model 1": "模型 1️⃣",
|
||
"Model 2": "模型 2️⃣",
|
||
"Model 3": "模型 3️⃣",
|
||
"Model 4": "模型 4️⃣",
|
||
"Model 5": "模型 5️⃣",
|
||
"model A": "模型 A",
|
||
"model_A": "模型 A",
|
||
"Model A": "模型 A",
|
||
"Model_A": "模型A",
|
||
"Model autoload on server start": "服务器启动时自动加载模型",
|
||
"model B": "模型 B",
|
||
"model_B": "模型 B",
|
||
"Model B": "模型 B",
|
||
"Model_B": "模型 B",
|
||
"model C": "模型 C",
|
||
"model_C": "模型 C",
|
||
"Model C": "模型 C",
|
||
"Model cache size (requires restart)": "模型緩存大小（需要儲存設定並重新啟動）",
|
||
"Model compile backend (experimental)": "模型编译后端 (实验性)",
|
||
"Model compile mode (experimental)": "模型编译模式（实验性）",
|
||
"Model configuration": "模型配置",
|
||
"Model Converter": "模型轉換器",
|
||
"Model D": "模型 D",
|
||
"Model description/readme/notes/instructions": "模型的描述資訊",
|
||
"Model Epoch:": "模型訓練週期：",
|
||
"Model filename:": "模型文件名: ",
|
||
"Model Filename:": "模型文件名: ",
|
||
"Model format": "模型格式",
|
||
"Model Format": "模型格式",
|
||
"model hash": "模型雜湊值",
|
||
"Model hash": "模型雜湊值",
|
||
"ModelID": "模型 ID",
|
||
"Model Info": "模型信息",
|
||
"Model is recompiled when resolution, batchsize, device, or samplers like DPM++ or Karras are changed.": "当改变分辨率、单批数量、设备、采样方法 (如 DPM++ 或 Karras) 时, 模型将被重新编译",
|
||
"model-keyword": "模型關鍵字",
|
||
"model list": "模型列表",
|
||
"Model list": "模型列表",
|
||
"model_name": "模型名",
|
||
"Model name": "模型名",
|
||
"Model Name": "模型名称",
|
||
"(Model names [with file extension] or their hashes, separated by commas)": "(模型名 [需要带文件拓展名] 或它们的哈希值, 用逗号分隔)",
|
||
"Model not found, please download one and reload automatic 1111": "无法检索到模型，请至少下载一个后重启 webui",
|
||
"model of the upscaler to use. 'realesr-animevideov3' is much faster but yields smoother, less detailed results. the other models only do x4": "需要使用的超分模型。 'realesr-animevideov3' 速度更快但生成的结果更平滑、更详细。其他超分模型只支持 4 倍放大",
|
||
"Model params": "模型参数",
|
||
"model path": "模型路径",
|
||
"Model path": "模型路徑",
|
||
"Model Path": "模型路徑",
|
||
"Model path filter": "模型路徑過濾器",
|
||
"Model precision": "模型精度",
|
||
"Model pruning methods": "模型修剪方式",
|
||
"Model Revision:": "模型修正：",
|
||
"models": "模型",
|
||
"Models": "模型",
|
||
"Models...": "模型列表...",
|
||
"Model scheduler to use. Only applies to models before 2.0.": "使用的模型调度器。仅适用于低于 2.0 版本的模型。",
|
||
"Models directory (if not default)": "模型目录 (如非默认)",
|
||
"Model Selection": "选择模型",
|
||
"(models in subdirectories like photo/sd15.ckpt will be listed as just sd15.ckpt)": "(例如 “写实模型/sd15.ckpt” 这样放在子目录中的模型会仅显示为 \"sd15.ckpt\")",
|
||
"Model sort order": "模型排序方式",
|
||
"Model Toolkit": "模型工具箱",
|
||
"model to use": "使用的模型",
|
||
"Model type": "模型类型",
|
||
"Model Type": "模型种类",
|
||
"Model Types": "模型种类",
|
||
"Model URL or Model ID": "模型链接或模型 ID",
|
||
"Model variants": "模型变种",
|
||
"Model Version": "模型版本",
|
||
"Model versions": "模型版本",
|
||
"Mode to add the extra tags to the main tag list": "將追加標記加入主標記清單的模式",
|
||
"Mode to use for model list": "模型名稱清單的使用模式",
|
||
"Modified:": "最后修改日期:",
|
||
"Module Color": "方块颜色",
|
||
"Modules": "模組",
|
||
"monochromatic": null,
|
||
"Monochrome": "Monochrome (单色)",
|
||
"More info about Anti Burn": "关于 Anti Burn 的更多信息",
|
||
"More Information": "更多信息",
|
||
"Most Downloaded": "Most Downloaded (最多下载)",
|
||
"Most Liked": "Most Liked (最受欢迎)",
|
||
"Motion": "运动",
|
||
"Motion module": "动画模型",
|
||
"Motion preview mode (dry run).": "运动预览模式 (预演)",
|
||
"Motion use prev img": "运动使用前帧渲染图像",
|
||
"Mouse over image: Press": "鼠标置于图片之上:按住 ",
|
||
"Mov2Mov output path for image": "Mov2Mov 图片输出路径",
|
||
"Mov2Mov output path for vedio": "Mov2Mov 视频输出路径",
|
||
"Mov2Mov output path for video": "Mov2Mov 视频输出路径",
|
||
"Move": "移動",
|
||
"Move buttons copy instead of move": "將移動按鈕以複製取代",
|
||
"- Move canvas": " - 移動畫布",
|
||
"move canvas left/right in pixels per frame": "以每帧多少像素左/右移动画布",
|
||
"move canvas towards/away from view [speed set by FOV]": "将画布靠近/远离镜头 [速度由视场角设置决定］",
|
||
"move canvas up/down in pixels per frame": "以每帧多少像素上/下移动画布",
|
||
"Move completion popup together with text cursor": "移動彈出視窗至文字游標處",
|
||
"Move ControlNet images to CPU (if applicable)": "將 ControlNet 圖像移至 CPU（如果可使用）",
|
||
"Move ControlNet tensor to CPU (if applicable)": "将 ControlNet tensor 移至CPU (如果适用)",
|
||
"Move/Copy/Delete matching .txt files": "将图片的移动、复制、删除操作应用到与之同名的 txt 文件",
|
||
"Move face restoration model from VRAM into RAM after processing": "面部修復處理完成後，將此模型從 VRAM 移至 RAM",
|
||
"Move File(s)": "移动文件",
|
||
"Move Mode (X key)": "移动模式(X 键)",
|
||
"Move motion module to CPU (default if lowvram)": "将模型移动到 CPU (lowvram 默认行为)",
|
||
"Move or Delete": "移动或删除",
|
||
"Move or Delete Files": "移动/删除文件",
|
||
"Move quicksettings to image setting panel": "移动快速设置到左侧图像设置面板",
|
||
"Move to archive": "移至归档",
|
||
"Move to directory": "移動到目錄",
|
||
"Move to favorites": "移動到收藏夾",
|
||
"Move VAE and CLIP to RAM when training hypernetwork. Saves VRAM.": "训练超网络时将 VAE 和 CLIP 模型移动到内存，可节省显存",
|
||
"Move VAE and CLIP to RAM when training if possible": "训练时尽可能将 VAE 与 CLIP 模型移动到内存",
|
||
"Move VAE and CLIP to RAM when training if possible. Saves VRAM.": "訓練時將 VAE 和 CLIP 從 VRAM 移放到 RAM 如果可行的話，節省 VRAM",
|
||
"Move VAE to GPU": "將 VAE 移至 GPU",
|
||
"Move VAE to GPU (if possible)": "将 VAE 移动到 GPU (如果允许)",
|
||
"Move visible tags to exclude tags": "将可见标签移至排除标签",
|
||
"Move visible tags to keep tags": "将可见标签移至保留标签",
|
||
"Movie Input": "视频输入",
|
||
"Moving canvas": "移动画布",
|
||
"Moving the canvas": "移动画布",
|
||
"Mul": "倍乘",
|
||
"Multi-ControlNet: ControlNet unit number (requires restart)": "多重 ControlNet: ControlNet 单元数量 (需重启)",
|
||
"Multi ControlNet: Max models amount (requires restart)": "ControlNet Unit 的最大数量 (需重启)",
|
||
"Multi-frame rendering": "多帧渲染",
|
||
"Multi-Inputs": "多张上传",
|
||
"Multi Merge": "多重合并",
|
||
"Multi Model Merge": "多模型合并",
|
||
"Multiplication (2^N)": "倍率 (2^N)",
|
||
"Multiplication (x0.5, x1.5)": "倍率 （x0.5, x1.5）",
|
||
"multiplier": "倍率",
|
||
"Multiplier": "倍率",
|
||
"Multiplier for extra networks": "額外網絡的乘數",
|
||
"Multiplier (M) - set to 0 to get model A": "倍率（M）- 設為 0 等價於模型 A",
|
||
"multiply": "色彩增值",
|
||
"Multi Proc Cmd": "多进程命令",
|
||
"Multi string search: part1, part2.. (Enter key to update)": "多字符检索: 第 1 部分, 第 2 部分 ... (按回车 [Enter] 键更新)",
|
||
"must be enabled": "选项需要启用",
|
||
"(must be < sampling steps)": "(需小于迭代步数)",
|
||
"My prompt is more important": "我的提示詞更重要",
|
||
"naive": "朴素卷积算法",
|
||
"naive_interpolating": "朴素插值算法",
|
||
"name": "名稱",
|
||
"Name": "名稱",
|
||
"Name 0": "名称 0",
|
||
"Name 1": "名称 1",
|
||
"Name 10": "名称 10",
|
||
"Name 11": "名称 11",
|
||
"Name 12": "名称 12",
|
||
"Name 13": "名称 13",
|
||
"Name 14": "名称 14",
|
||
"Name 15": "名称 15",
|
||
"Name 2": "名称 2",
|
||
"Name 3": "名称 3",
|
||
"Name 4": "名称 4",
|
||
"Name 5": "名称 5",
|
||
"Name 6": "名称 6",
|
||
"Name 7": "名称 7",
|
||
"Name 8": "名称 8",
|
||
"Name 9": "名称 9",
|
||
"Name of saved checkpoint to load weights from": "用于加载权重的模型名称",
|
||
"Name of the character": "角色名称",
|
||
"Native Diffusers": "原生 Diffusers",
|
||
"nature": null,
|
||
"Nautical": "Nautical (航海)",
|
||
"Navigate image viewer with gamepad": "使用游戏手柄导航图像查看器",
|
||
"Near clip": "近端衰减",
|
||
"Near schedule": "近处裁面距离调度计划",
|
||
"Neck": "颈部",
|
||
"Need help?": "需要幫助？",
|
||
"need help? please visit our": "需要帮助? 请浏览我们的 ",
|
||
"need input your want to translate": "请输入你想翻译的内容",
|
||
"negative": "反向",
|
||
"Negative Filter": "Negative 过滤器",
|
||
"Negative Guidance minimum sigma": "反向提示词引导最小 sigma",
|
||
"➖ Negative Mask": "➖ 反向蒙版",
|
||
"Negative prompt": "反向提示詞",
|
||
"Negative Prompt": "反向提示词",
|
||
"Negative prompt for hires fix pass.\nLeave empty to use the same negative prompt as in first pass.": "用于高分修复层的反向提示词\n留空以使用与第一层相同的提示词",
|
||
"Negative prompt for upscale (replaces generation prompt)": "用于放大的反向提示词 (替换生成提示词)",
|
||
"Negative prompt mode": "反向提示词模式",
|
||
"Negative prompt: please enter Y if this prompt is a negative prompt.": "反向提示词：如果该提示词是反向提示词，请输入 Y。",
|
||
"Negative prompt (press Ctrl+Enter or Alt+Enter to generate)": "反向提示詞（按 Ctrl+Enter 或 Alt+Enter 產生）",
|
||
"Negative prompt\n(Press Ctrl+Enter to generate, Alt+Enter to skip, Esc to interrupt)": "反向提示词 Negative prompt\n(按 Ctrl+Enter 开始生成，Alt+Enter 跳过当前图片，ESC 停止生成)",
|
||
"Negative Prompts": "反向提示词",
|
||
"negative prompt to be appended to *all* prompts. DON'T use --neg here!": "反向提示词会被添加到左右提示词内，请勿在此处使用 --neg 字段",
|
||
"Negative Prompt Weight": "反向提示詞權重",
|
||
"Negative Prompt, will also be appended": "追加反向提示词",
|
||
"Negative weight": "反向反馈权重",
|
||
"neg_prompt": "反向提示词",
|
||
"Neon Noir": "Neon Noir (霓虹黑色)",
|
||
"Neon Punk": "Neon Punk (霓虹朋克)",
|
||
"Net dim (128 ~ 144MB)": "网络维度 (128 ~ 144MB)",
|
||
"Net height": "深度图高度",
|
||
"Net width": "深度图宽度",
|
||
"Network module": "附加網路類型",
|
||
"Network module 1": "附加網路類型 1️⃣",
|
||
"Network module 2": "附加網路類型 2️⃣",
|
||
"Network module 3": "附加網路類型 3️⃣",
|
||
"Network module 4": "附加網路類型 4️⃣",
|
||
"Network module 5": "附加網路類型 5️⃣",
|
||
"Never": "从不",
|
||
"Nevysha Cozy Nest Settings": "Nevysha Cozy Nest 设置",
|
||
"Nevysha Cozy Nest Update Info": "Nevysha Cozy Nest 更新信息",
|
||
"New Canvas Height": "畫布高度",
|
||
"New Canvas Width": "畫布寬度",
|
||
"new commits": "新提交版本",
|
||
"New defaults will apply after you restart the UI.": "新的默认设置将会在重启 UI 后应用。",
|
||
"Newest": "Newest (最新)",
|
||
"newest first": "最新的在最前面",
|
||
"New model name": "新模型名称",
|
||
"New Preset": "新预设",
|
||
"New preset name ": "新预设名称",
|
||
"New row": "新一行",
|
||
"New Scribble Drawing Height": "新线稿画板高度",
|
||
"New Scribble Drawing Width": "新线稿画板宽度",
|
||
"New text file will be created if you are using filename as captions.": "如果您使用文件名作为标签，将创建新的文本文件",
|
||
"Next batch": "下一批",
|
||
"Next page": "下一页",
|
||
"Next Page": "下一頁",
|
||
"Nickname": "昵称",
|
||
"no": "否",
|
||
"No": "否",
|
||
"no-ema": "删除 EMA 权重",
|
||
"no find:": "未找到：",
|
||
"no image selected": "未選擇圖像",
|
||
"No interpolation": "無插值",
|
||
"No interpolation will be used. Requires one model; A. Allows for format conversion and VAE baking.": "直接输出主要模型。需要一个模型 A。可用于模型格式转换和嵌入 VAE。",
|
||
"Noise": "噪声(点)",
|
||
"Noise Inversion": "噪声反转",
|
||
"Noise mask schedule": "噪声蒙版调度计划",
|
||
"(noise multiplier; applies to Euler a and other samplers that have a in them)": "(噪声倍率: 适用于 Euler a 和其他具有 a 的采样方法)",
|
||
"noise multiplier; applies to Euler a and other samplers that have the letter 'a' in them": "噪声倍率; 应用于 Euler a 和其他带 a 的采样方法",
|
||
"noise multiplier; applies to Euler A and other samplers that have the letter 'a' in them": "噪声倍率; 适用于 Euler a 和其他带有 ‘a’ 的采样方法",
|
||
"(noise multiplier; currently only applies to ancestral samplers (i.e. Euler a) and SDE samplers)": "(噪声倍率; 当前仅作用于 Ancestral 采样方法 (例如 Euler a) 和 SDE 采样方法)",
|
||
"Noise multiplier for img2img": "圖生圖的噪聲乘數",
|
||
"Noise multiplier for img2img 10th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 2nd": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 3rd": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 4th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 5th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 6th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 7th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 8th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 9th": "图生图噪声倍率",
|
||
"(noise multiplier; higher = more unperdictable results)": "(噪声倍率; 越高 = 结果越难以预测)",
|
||
"(noise multiplier; higher = more unpredictable results)": "(噪声倍率; 越高 = 结果越难以预测)",
|
||
"Noise multiplier schedule": "噪声倍率调度计划",
|
||
"Noise schedule": "噪声调度计划",
|
||
"Noise schedule for sampling": "采样噪声调度器类型",
|
||
"Noise scheduler": "噪声调度器",
|
||
"Noise Strength": "噪声强度",
|
||
"Noise Tolerance": "噪声容忍度",
|
||
"Noise type": "噪声类型",
|
||
"No model has new version": "所有模型均是最新版本",
|
||
"none": "無",
|
||
"None": "無",
|
||
"NONE": "无",
|
||
"None (just grayscale)": "什么都不做（灰度模式）",
|
||
"None - prompt only": "无 - 仅提示词",
|
||
"normal": "普通",
|
||
"Normal": "Normal",
|
||
"Normal Background Threshold": "背景识别阈值",
|
||
"normal_bae": "normal_bae (Bae 法线贴图提取 新)",
|
||
"Normalizes each image separately by mean and standard deviation in your dataset. Useful to preserve likeness to your images.": "根据数据集中的平均值和标准差分别对每幅图像进行归一化处理。有助于保持图像的相似性。",
|
||
"Normally, changing the resolution will completely change an image, even when using the same seed. If you generated an image with a particular seed and then changed the resolution, put the original resolution here to get an image that more closely resemles the original": "一般情况下，即使使用相同的种子，改变分辨率也会完全改变图像。如果使用特定种子生成图像，然后但又需要改变分辨率，请在此输入原始分辨率以获得更接近原始分辨率的图像。",
|
||
"Normally, it creates a single random prompt. With prompt compounder, it will generate multiple prompts and compound them together.": "一般情况下只能创建一个单一的随机提示。但有了提示词混合，可以生成多个提示词并将它们复合在一起。",
|
||
"(normally you'd do less with less denoising)": "(正常情况下越小的重绘幅度需要的迭代步数更少)",
|
||
"NormalMap": "NormalMap (法线贴图)",
|
||
"normal_midas": "normal_midas (Midas 法线贴图提取 舊)",
|
||
"Normal with batch": "正常（带批处理）",
|
||
"Nose To Neck": "鼻颈距离",
|
||
"not": "不会",
|
||
"note": "注意事项",
|
||
"Note": "注意事项",
|
||
"Note: Moved or deleted images will be unloaded.": "备注：已移动或已删除的图像将被卸载。",
|
||
"Notes": "備註",
|
||
"Note that parseq overrides:": "以下参数将会被参数定序器覆盖设置：",
|
||
"(not for Video Input mode)": " (不用于视频输入模式)",
|
||
"Nothing here. Add some content to the following directories:": "這裡什麼都沒有。加入一些內容至以下目錄：",
|
||
"(notification.mp3 should be present in the root directory)": "(通知声音文件 (notification.mp3) 需放入根目录中)",
|
||
"Notification sound volume": "通知音量",
|
||
"(No Trigger Word)": "(无触发词)",
|
||
"not save grid": "不保存网格图",
|
||
"Now use it like this:": "然后像这样使用：",
|
||
"NSFW content": "允许成人内容",
|
||
"NSFW score threshold. Any image part with a score above this value will be treated as NSFW (use extension responsibly !). 1=Disable filtering": "NSFW 评分阈值。分数高于预设值的会被视为 NSFW 图像 (做人做事应有责任心)。1 = 禁用 NSFW 过滤",
|
||
"Nucleus Sampling": "Nucleus Sampling (核心取样)",
|
||
"nudity": null,
|
||
"NUl Image Enhancer": "NUI 图像增强",
|
||
"Number of cached models": "缓存大模型数量",
|
||
"Number of cached VAEs": "缓存 VAE 数量",
|
||
"Number of columns for added settings": "添加设置的列数",
|
||
"Number of columns on the page": "每頁列數",
|
||
"Number of connections to use for downloading a model": "下载模型时使用的连接数",
|
||
"Number of epochs": "epoch 数量",
|
||
"Number of epochs after which training will be paused for the specified time. Useful if you want to give your GPU a rest.": "每训练多少 Epoch 后暂停。使 GPU 充分休息。",
|
||
"Number of frames": "总帧数",
|
||
"Number of iterations": "迭代次数",
|
||
"Number of Lora networks to keep cached in memory": "可缓存在内存中的 Lora 模型数量",
|
||
"Number of negative vectors per token": "每個標記的反向向量數",
|
||
"Number of parallel calculations": "并行计算数",
|
||
"Number of repeats for a single input image per epoch; used only for displaying epoch number": "每期（epoch）中單個輸入圖像的重複次數； 僅用於顯示期（epoch）數",
|
||
"Number of rows on the page": "每頁行數",
|
||
"Number of samples to generate": "要生成的样本数量",
|
||
"Number of Samples to Generate": "產生樣本的數量",
|
||
"Number of sampling steps for upscaled picture. If 0, uses same as for original.": "放大圖片的取樣步數。如果為0，則使用與原始圖片相同的值。",
|
||
"number of seed": "种子值",
|
||
"Number of steps for the warmup in the lr scheduler. LR will start at 0 and increase to this value over the specified number of steps.": "LR 调度器中预热的步数。LR 会从 0 开始按指定的步数内递增至该值。",
|
||
"number of the frames that we will blend between current imagined image and input frame image": "当前想象图像和输入帧图像之间混合的帧数",
|
||
"Number of updates steps to accumulate before performing a backward/update pass.": "在执行反向传播/更新之前累积的更新步数。",
|
||
"Number of vectors per token": "每個標記的向量數",
|
||
"(O10) Output ckpt Name": "(O10) 输出模型文件名",
|
||
"(O1) Output ckpt Name": "(O1) 输出模型文件名",
|
||
"(O2) Output ckpt Name": "(O2) 输出模型文件名",
|
||
"(O3) Output ckpt Name": "(O3) 输出模型文件名",
|
||
"(O4) Output ckpt Name": "(O4) 输出模型文件名",
|
||
"(O5) Output ckpt Name": "(O5) 输出模型文件名",
|
||
"(O6) Output ckpt Name": "(O6) 输出模型文件名",
|
||
"(O7) Output ckpt Name": "(O7) 输出模型文件名",
|
||
"(O8) Output ckpt Name": "(O8) 输出模型文件名",
|
||
"(O9) Output ckpt Name": "(O9) 输出模型文件名",
|
||
"object": null,
|
||
"object - Can be a random object, a building or a vehicle.": "object - 物件 - 可以是一个随机的物体，也可以是一个建筑物或一辆车。",
|
||
"(obsolete; set to 0 and use the two settings above instead)": "(已过时; 设置为 0 以使用上述两个选项的设置)",
|
||
"octane render": null,
|
||
"official Deforum Discord": "官方 Deforum Discord",
|
||
"Official Deforum Wiki:": "官方 Deforum Wiki：",
|
||
"Offset Noise": "噪聲偏移",
|
||
"# of in-between frames that will not be directly diffused": "不会被直接扩散的中间帧的 # 数",
|
||
"# of threads to use for hash calculation (increase if using an SSD)": "用於雜湊值計算的線程數（如果使用 SSD 可適量增加）",
|
||
"oldest first": "最舊的在最前面",
|
||
"On": "开",
|
||
"once": "一次",
|
||
"Once turned on, it will retry for n amount of times to get an image with the quality score. If not, it will take the best image so far and continue.": "一旦启用，它将持续生成 N 次以获得具有一定质量分数的图像。如果没有，它将保留评分最好的图像持续生成。",
|
||
"Once you select a model it will take some time to load.": "模型选择后将花费一段时间加载。",
|
||
"On, concurrent (don't pause generation)": "开, 并发处理 (不暂停生成进程)",
|
||
"One Button Prompt": "One Button Prompt (一键生成提示词)",
|
||
"One Button Run and Upscale": "一键运行并放大",
|
||
"One-Time Hash Generation for externally downloaded models.": "为外部下载模型进行一次性哈希生成",
|
||
"online": "線上",
|
||
"Online 3D Openpose Editor": "在线 3D Openpose 编辑器",
|
||
"Online resources:": "在线资源：",
|
||
"Only": "只有",
|
||
"only 2D motion parameters will be used, but this mode uses the least amount of VRAM. You can optionally enable flip_2d_perspective to enable some psuedo-3d animation parameters while in 2D mode.": "将只使用 2D 运动参数，该模式下使用的显存最少。你可以选择启用 2D 透视翻转，以便在 2D 模式下启用一些模拟 3D 动画的参数",
|
||
"only affects the 'Blend'": " 仅影响 '混合' ",
|
||
"(only applies if non-zero and overrides above)": "(仅在数值设置为非零时启用, 启用时覆盖原 Token 合并比率设置)",
|
||
"(Only applies to Aria2)": "(只应用于 Aria2)",
|
||
"Only applies to inpainting models. Determines how strongly to mask off the original image for inpainting and img2img. 1.0 means fully masked, which is the default behaviour. 0.0 means a fully unmasked conditioning. Lower values will help preserve the overall composition of the image, but will struggle with large changes.": "僅適用於局部重繪專用的模型（模型後綴為 inpainting.ckpt 的模型）。決定了遮罩在局部重繪以及圖生圖中遮蔽原圖內容的強度。 1.0 表示完全遮蔽原圖，這是預設行為。 0.0 表示完全不遮蔽讓原圖進行圖像調節。較低的值將有助於保持原圖的整體構圖，但很難遇到較大的變化。",
|
||
"Only copy to models with no metadata": "僅複製到沒有中繼資料的模型（不覆蓋原中繼資料）",
|
||
"Only copy to models with same session ID": "僅複製到具有相同作業階段 ID 的模型",
|
||
"Only Hand": "仅显示手部(移除脚部)",
|
||
"ONLY in use when working with a P2P ckpt!": "此选项仅在加载 Pix2Pix 模型时生效",
|
||
"*Only in use with pix2pix checkpoints!*": "*仅在加载 Pix2Pix 模型时生效!*",
|
||
"Only keep one model on device": "仅保留一个模型在显存中",
|
||
"Only masked": "僅被遮罩",
|
||
"Only masked padding, pixels": "僅填充遮罩部分（像素）",
|
||
"Only Mouth": "仅嘴部",
|
||
"only other types --> Will pick only from the more unique types, such as stained glass window or a funko pop": "only other types -- 仅其它类型 --> 只从其他更独特的类型中挑选，如彩色玻璃窗或一只玩具人偶。",
|
||
"(Only relevant if the above option is enabled)": "(仅在上方选项启用时相关)",
|
||
"Only Selected Tags": "仅选中标签",
|
||
"Only send requests to these workers": "仅向这些节点发送请求",
|
||
"Only send requests to trusted workers": "仅向白名单中的节点发送请求",
|
||
"Only show alias": "僅顯示別名",
|
||
"Only Show Models have no Info": "只显示缺少信息的模型",
|
||
"Only show models that have/don't have user-added metadata": "僅顯示（有 / 無）使用者中繼資料",
|
||
"Only show .safetensors format models": "僅顯示 .safetensors 檔案格式的模型",
|
||
"Only store preferences locally": "仅在本地保存设置",
|
||
"Only track the mouth": "仅追踪嘴部",
|
||
"Only upscale will not use txt2img to generate an image.": "仅放大时不会通过文生图功能生成图像",
|
||
"Only use mid-control when inference": "仅在生成图片时使用中间层控制 (mid-control)",
|
||
"Only user list": "仅用户清单",
|
||
"Onnx model filename": "Onnx 模型文件名 (包含路径)",
|
||
"ONNX opset version": "ONNX 算子集版本",
|
||
"(O)Output Model Name": "输出模型文件名",
|
||
"Opacity": "不透明度",
|
||
"Open...": "打开...",
|
||
"Open images output directory": "打開圖像輸出目錄",
|
||
"Open images output directory.": "打开图像输出目录",
|
||
"Open intermediate results": "立即打开当前效果图",
|
||
"Open model Url on the user's client side, rather than server side": "在用户客户端侧打开模型链接，而不是服务端侧",
|
||
"Open model Url on the user's client side, rather than server side. If you are running WebUI locally, disabling this may open URLs in your default internet browser if it is different than the one you are running WebUI in": "在用户客户端侧打开模型链接，而不是服务端侧。如果是在本地运行 WebUI，禁用本选项可能会导致使用默认浏览器打开模型链接 (如果默认浏览器与正运行 WebUI 的浏览器不同)",
|
||
"Open model Url on the user's client side, rather than server side.If you are running WebUI locally, disabling this may open URLs in yourdefault internet browser if it is different than the one you are runningWebUI in": "在用户客户端侧打开模型链接，而不是服务端侧。如果是在本地运行 WebUI，禁用本选项可能会使用默认浏览器打开模型链接 (如果默认浏览器与正运行 WebUI 的浏览器不同)",
|
||
"Open new canvas": "打开新画布",
|
||
"Open New Canvas": "打開新畫布",
|
||
"Open New Scribble Drawing Canvas": "创建新的线稿画板",
|
||
"Open output directory": "打开输出目录",
|
||
"openpose": "openpose (OpenPose 姿态)",
|
||
"OpenPose": "OpenPose (姿态)",
|
||
"OpenPose Editor": "OpenPose編輯器",
|
||
"openpose_face": "openpose_face (OpenPose 姿态及脸部)",
|
||
"openpose_faceonly": "openpose_faceonly (OpenPose 仅脸部)",
|
||
"openpose_full": "openpose_full (OpenPose 姿态、手部及脸部)",
|
||
"openpose_hand": "openpose_hand (OpenPose 姿态及手部)",
|
||
"📁\nOpen PSD folder": "📁\n打开 PSD 保存文件夹",
|
||
"Open results": "打开最终效果图",
|
||
"📂 Open templates folder": "📂 打开模板文件夹",
|
||
"Open TextEditor": "打开文本编辑器",
|
||
"Open the generated .ebs under project directory and press [Run All] button.": "打开工程目录下生成的 .ebs 文件，然后按 [Run All] 按钮。",
|
||
"Open this model's civitai url": "在新标签页打开本模型的 Civitai 页面",
|
||
"Open Url At Client Side": "在客户端侧打开链接",
|
||
"open_url_button": "打开链接按钮",
|
||
"Optical Flow": "光流法",
|
||
"Optical flow cadence": "生成间隔中启用光流法",
|
||
"Optical flow generation": "光流生成",
|
||
"Optimal batch-size": "最优单批数量",
|
||
"Optimal height": "最优高度",
|
||
"Optimal prompt token count": "最优提示词词元计数",
|
||
"Optimal width": "最优宽度",
|
||
"Optimizations": "优化设置",
|
||
"Optimize attention layers with sdp (torch >= 2.0.0 required)": "使用 sdp 优化注意力层 (需 torch >= 2.0.0)",
|
||
"Optimize attention layers with xformers": "使用 xformers 优化注意力层",
|
||
"Optimize GIFs with gifsicle, reduces file size": "使用 gifsicle 优化 GIF，减小文件大小",
|
||
"Optimizer": "優化器",
|
||
"Optimizer algorithm.\nRecommended settings (LR = Learning Rate, WD = Weight Decay):\nTorch / 8Bit AdamW - LR: 2e-6, WD: 0.01\nLion - LR: 5e-7, WD: 0.02\nAdamW Adapt - LR: 0.05, WD: 0\nLion Adapt - LR: ??, WD:0\nSGD Adapt - LR: 1, WD: 0\nAdan Adapt - LR: 0.2, WD: 0.01": "优化设置。\n推荐以下设置 (LR = 学习率, WD = 权重衰减):\nTorch / 8Bit AdamW - LR: 2e-6, WD: 0.01\nLion - LR: 5e-7, WD: 0.02\nAdamW Adapt - LR: 0.05, WD: 0\nLion Adapt - LR: ??, WD:0\nSGD Adapt - LR: 1, WD: 0\nAdan Adapt - LR: 0.2, WD: 0.01",
|
||
"Optimizer type": "优化器类型",
|
||
"optimizes the self-attention layer within U-Net and VAE models,\n resulting in a reduction in computation time ranging from 1 to 4 times. The larger the generated image is, the greater the\n benefit.": " 优化 U-Net 和 VAE 模型的自注意力层，使计算时间减少 50% 到 75% 不等。生成的图像越大，效果越明显。",
|
||
"Optionally use [filewords] to read image captions from files.": "可以選擇使用 [filewords] 從檔案中讀取圖像標題。",
|
||
"(Optional) Path to directory with classification/regularization images": "（可選）帶有類別(正則) 圖像的目錄路徑",
|
||
"(optional) separated by commas. EX: Character Name/Style Attributes": "（可选）用逗号分隔，例如：Character Name/Style Attributes",
|
||
"Options": "选项",
|
||
"Options are all options hardcoded, and additional you added in additional_components.py": "选项都是硬编码的选项，并且是您在 additional_components.py 中添加的附加选项",
|
||
"Options can be given weights:": "可以給選項權重：",
|
||
"Options in main UI": "主界面额外选项",
|
||
"Options in main UI - img2img": "主界面额外选项 - 图生图",
|
||
"Options in main UI - number of columns": "主界面的额外选项 - 列数",
|
||
"Options in main UI - place into an accordion": "主界面的额外选项 - 置入一个手风琴容器",
|
||
"Options in main UI - txt2img": "主界面额外选项 - 文生图",
|
||
"opts onchange": "选项更改",
|
||
"- or -": "- 或 -",
|
||
"or": "或",
|
||
"OR": "或",
|
||
"Order": "排序",
|
||
"(Order for extra network models and wildcards in dropdown)": "(下拉菜单中的扩展模型和通配符排列顺序)",
|
||
"Organization": "组织",
|
||
"Origami": "Origami (日本折纸)",
|
||
"original": "原圖",
|
||
"Original:": "原项目:",
|
||
": Original extension": ": 原始扩展名",
|
||
": Original extension\nAvailable algorithms:": ": 原始扩展名\n可用算法: ",
|
||
": Original filename without extension": ": 没有扩展名的原始文件名",
|
||
"Original filename without extension": "没有扩展名的原始文件名",
|
||
"Original file’s hash (good for deleting duplication)": "原始文件哈希值 (有助于检测重复项)",
|
||
"Original First": "原文優先",
|
||
"Original FPS": "原始 FPS",
|
||
"Original Image": "原始图像",
|
||
"OriginalImg": "OriginalImg (原始输入的第一帧)",
|
||
"Original model": "原始模型",
|
||
"Original Movie Path": "原始视频路径（路径和文件名均不可包含中文、下划线和特殊符号）",
|
||
"Original negative prompt": "初始反向提示詞",
|
||
"Original prompt": "初始提示詞",
|
||
"Original Text = \"A, A, B, C\" Common Tags = \"B, A\" Edit Tags = \"X, Y\"": "原文本 = \"A, A, B, C\" 常用标签 = \"B, A\" 编辑标签 = \"X, Y\"",
|
||
"Original Text = \"A, B, C\" Common Tags = \"(nothing)\" Edit Tags = \"X, Y\"": "原文本 = \"A, B, C\" 常用标签 = \"(nothing)\" 编辑标签 = \"X, Y\"",
|
||
"Original Text = \"A, B, C, D, E\" Common Tags = \"A, B, D\" Edit Tags = \", X, \"": "原文本 = \"A, B, C, D, E\" 常用标签 = \"A, B, D\" 编辑标签 = \", X, \"",
|
||
"Original total duration": "原始总时长",
|
||
"Original total frames": "原始总帧数",
|
||
"original video frame": "原始视频帧",
|
||
"Original Weights": "原始权重",
|
||
"or, manually enhance the image": "↓手动控制图像增强参数↓",
|
||
"(or open as text in a new page)": "（或在新的标签页查看）",
|
||
"or to CTRL+SHIFT": "或是 Ctrl + Shift",
|
||
"Other": "其他",
|
||
"Other:": "其他:",
|
||
"other imports": "其他导入项",
|
||
"Other Info": "其他信息",
|
||
"Other prompt fields": "其他提示词段",
|
||
"others": "其他",
|
||
"- Others": "- 其他",
|
||
"Others": "其他",
|
||
"Other Setting": "其他设置",
|
||
"Otherwise, read the": "否则，请阅读",
|
||
"(otherwise, those detected as for incompatible version of Stable Diffusion will be hidden)": "(否则, 将隐藏不兼容当前加载的 Stable Diffusion 模型版本的模型)",
|
||
"OUT": "输出层",
|
||
"OUT00": "输出层 00",
|
||
"OUT01": "输出层 01",
|
||
"OUT02": "输出层 02",
|
||
"OUT03": "输出层 03",
|
||
"OUT04": "输出层 04",
|
||
"OUT05": "输出层 05",
|
||
"OUT06": "输出层 06",
|
||
"OUT07": "输出层 07",
|
||
"OUT08": "输出层 08",
|
||
"OUT09": "输出层 09",
|
||
"OUT10": "输出层 10",
|
||
"OUT11": "输出层 11",
|
||
"OUT_A_00": "模型 A 输出层 00",
|
||
"OUT_A_01": "模型 A 输出层 01",
|
||
"OUT_A_02": "模型 A 输出层 02",
|
||
"OUT_A_03": "模型 A 输出层 03",
|
||
"OUT_A_04": "模型 A 输出层 04",
|
||
"OUT_A_05": "模型 A 输出层 05",
|
||
"OUT_A_06": "模型 A 输出层 06",
|
||
"OUT_A_07": "模型 A 输出层 07",
|
||
"OUT_A_08": "模型 A 输出层 08",
|
||
"OUT_A_09": "模型 A 输出层 09",
|
||
"OUT_A_10": "模型 A 输出层 10",
|
||
"OUT_A_11": "模型 A 输出层 11",
|
||
"OUT_B_00": "模型 B 输出层 00",
|
||
"OUT_B_01": "模型 B 输出层 01",
|
||
"OUT_B_02": "模型 B 输出层 02",
|
||
"OUT_B_03": "模型 B 输出层 03",
|
||
"OUT_B_04": "模型 B 输出层 04",
|
||
"OUT_B_05": "模型 B 输出层 05",
|
||
"OUT_B_06": "模型 B 输出层 06",
|
||
"OUT_B_07": "模型 B 输出层 07",
|
||
"OUT_B_08": "模型 B 输出层 08",
|
||
"OUT_B_09": "模型 B 输出层 09",
|
||
"OUT_B_10": "模型 B 输出层 10",
|
||
"OUT_B_11": "模型 B 输出层 11",
|
||
"Outer Fit (Shrink to Fit)": "贴合外边 (收缩以贴合)",
|
||
"outline inflating": "轮廓填充",
|
||
"Outpainting direction": "向外繪製的方向",
|
||
"output": "输出",
|
||
"Output": "輸出",
|
||
"Output animation path": "动画输出路径",
|
||
"Output DepthMap": "保存深度图",
|
||
"Output directory": "輸出目錄",
|
||
"Output Directory": "輸出目錄",
|
||
"Output directory for grids": "网格图输出文件夹",
|
||
"Output directory for grids; if empty, defaults to two directories below": "宮格圖的輸出目錄； 如果為空，則預設為以下兩個目錄",
|
||
"Output directory for images from extras tab": "更多頁籤的輸出目錄",
|
||
"Output directory for images; if empty, defaults to three directories below": "圖像的輸出目錄； 如果為空，則預設為以下三個目錄",
|
||
"Output directory for img2img grids": "圖生圖宮格的輸出目錄",
|
||
"Output directory for img2img images": "圖生圖的輸出目錄",
|
||
"Output directory for txt2img grids": "文生圖宮格的輸出目錄",
|
||
"Output directory for txt2img images": "文生圖的輸出目錄",
|
||
": Output extension (has no dot)": "输出扩展名 (没有 '.' 点)",
|
||
"Output filename": "输出文件名",
|
||
"Output filename format": "输出文件名格式",
|
||
"Output filename formats": "输出文件名格式",
|
||
"Output format": "输出格式",
|
||
"output height resolution": "输出高度分辨率",
|
||
"output images will be placed in a folder with this name ({timestring} token will be replaced) inside the img2img output folder. Supports params placeholders. e.g {seed}, {w}, {h}, {prompts}": "输出图像会置于图生图输出文件夹内含此名称的文件夹中。( {timestring} 这个词元会被替换) \n也支持参数占位符, 例如: {seed}, {w}, {h}, {prompts} 等",
|
||
"Output images will be shown here": "输出图像会在此处展示",
|
||
"Output Image Width": "输出图像宽度",
|
||
"Output Mask directory": "蒙版输出目录",
|
||
"Output Mode": "输出模式",
|
||
"Output Model Name": "输出模型文件名",
|
||
"Output name": "输出名称",
|
||
"Output name:": "输出名称: ",
|
||
"Output path": "输出路径",
|
||
"Output Paths": "输出路径",
|
||
"Output per image:": "单独输出每张图像：",
|
||
"output resolution": "输出分辨率",
|
||
"Output Root": "Output 文件夹根目录",
|
||
"outputs": "输出",
|
||
"Output settings: all settings (including fps and max frames)": "输出设置：所有设置（包括帧率和最大帧数）",
|
||
"Output style": "输出类型",
|
||
"Output type": "输出类型",
|
||
"output video resolution": "输出视频的分辨率",
|
||
"Out Res": "输出分辨率",
|
||
"Overlap": "重叠",
|
||
"Overlap ratio": "重叠比率",
|
||
"overlay": "覆蓋",
|
||
"Overlay mask": "覆盖蒙版",
|
||
"Overlay original for inpaint": "重绘时使用原图覆盖蒙版外区域",
|
||
"override:": "覆盖以下参数：",
|
||
"Override": "覆盖",
|
||
"Override `Denoising strength` to 1?": "覆寫「重繪幅度」為 1？",
|
||
"Override options (choose the related subject type first for better results)": "覆盖选项 (首选相关的主题类型以获得更好的结果)",
|
||
"Override `prompt` to the same value as `original prompt`?(and `negative prompt`)": "覆寫「提示詞」為「初始提示詞」？（「反向提示詞」同理）",
|
||
"Override `Sampling method` to Euler?(this method is built for it)": "覆寫「採樣方法」為 Euler？（這個方法就是為它設計的）",
|
||
"Override `Sampling Steps` to the same value as `Decode steps`?": "覆寫「取樣疊代步數」為「解碼疊代步數」？",
|
||
"override_settings": "覆盖设置",
|
||
"Override settings": "覆寫設定",
|
||
"(Overrides the download folder location when saving images.)": "(保存图像时覆盖下载文件夹位置)",
|
||
"Override the sampling selection from the main UI (Recommended as only below sampling methods have been validated for OpenVINO)": "覆盖主界面的采样方法选择 (推荐开启, 因为仅以下采样方法已针对 OpenVINO 进行了验证)",
|
||
"overwrite": "允许覆盖",
|
||
"Overwrite": "覆写",
|
||
"Overwrite any existing previews, tags or descriptions.": "覆盖任意已存在的预览图, 标签, 或描述",
|
||
"Overwrite Checkpoint if exist (else will add number)": "覆盖已存在的同名模型 (不勾选将会在名称后添加序号)",
|
||
"Overwrite existing": "覆寫既有",
|
||
"Overwrite extracted frames": "覆盖已有帧",
|
||
"Overwrite image size": "覆寫圖像尺寸",
|
||
"Overwrite input frames": "覆盖输入帧",
|
||
"Overwrite Old Embedding": "覆寫舊的嵌入",
|
||
"Overwrite Old Hypernetwork": "覆寫舊的超網路（Hypernetwork）",
|
||
"Overwrite priority": "覆盖优先级",
|
||
"Overwrite subject": "覆盖主题",
|
||
"Overwrite subject:": "覆盖主题:",
|
||
"Overwrite type of image:": "覆盖图像类型",
|
||
"Padding mode": "填充模式",
|
||
"Padding Mode": "填充模式",
|
||
"Padding options": "填充选项",
|
||
"Padding token (ID or single token)": "填充提示词(完整ID或者单个提示词)",
|
||
"Pad prompt/negative prompt": "填充提示词/反向提示词到等长",
|
||
"Pad prompt/negative prompt to be same length": "补齐正向/反向提示词到相同长度",
|
||
"Pad prompt/negative prompt (v0)": "填充提示词/反向提示词到等长 (v0)",
|
||
"Pad the input images token length to this amount. You probably want to do this.": "把输入图像的词元长度填充到本选项设置长度。也许会有人有这个需求。",
|
||
"Pad Tokens": "填充標記",
|
||
"Page": "页面",
|
||
"Page Index": "頁數",
|
||
"Page navigation as header": "页面导航栏作为页眉",
|
||
"painting": null,
|
||
"pan canvas left/right in degrees per frame": "以每帧为单位向左/向右偏移画布",
|
||
"Panorama to 3D mesh": "全景图转 3D 网格",
|
||
"Papercut Collage": "Papercut Collage (拼贴剪纸)",
|
||
"Papercut Shadow Box": "Papercut Shadow Box (剪纸影盒)",
|
||
"Paper Mache": "Paper Mache (纸浆模)",
|
||
"Paper Quilling": "Paper Quilling (衍纸艺术)",
|
||
"Parameter": "参数",
|
||
"Parameters": "参数",
|
||
"Parameters to take from png info": "從 PNG 資訊中提取的參數",
|
||
"Params": "参数",
|
||
"Parse!": "解析",
|
||
"Parseq": "参数定序器 (parameter sequencer)",
|
||
"Parseq does": "参数定序器将",
|
||
"Parseq Manifest (JSON or URL)": "参数定序器配置文件（JSON 或者链接）",
|
||
"Parses instance prompts separated by the following characters [,;.!?], and prevents breaking up tokens when using the tokenizer. Useful if you have prompts separated by a lot of tags.": "解析被以下字符分隔的实例提示词 [,;.!?] ，并防止在使用词元分析器时将词元打乱。在有被大量字符分隔的提示词时十分有用。",
|
||
"Passing ControlNet parameters with \"Send to img2img\"": "使用\"发送到图生图\"时传输 ControlNet 参数",
|
||
"Password": "密码",
|
||
"paste": "粘贴",
|
||
"paste_append": "粘贴附件",
|
||
"Paste available values into the field": "將可用的值貼上到字段中",
|
||
"Paste ControlNet parameters in infotext": "将 ControlNet 参数写入到生成信息中",
|
||
"Path": "路径",
|
||
"Path:": "路径: ",
|
||
"Path for saving your persistent settings file:": "持久性设置文件的保存路径",
|
||
"path name": "路徑名",
|
||
"path_recorder": "路径记录",
|
||
"Path relative to the webui folder": "相对于 webui 文件夹的路径",
|
||
"Paths for saving": "儲存路徑",
|
||
"path/to/classify": "分类/路径",
|
||
"Path to directory containing annotator model directories (requires restart, overrides corresponding command line flag)": "包含預處理器模型的路徑（需要重新啟動，取代命令行設置）",
|
||
"Path to directory where to write outputs": "進行輸出的目錄路徑",
|
||
"Path to directory with input images": "帶有輸入圖像的目錄路徑",
|
||
"/path/to/images or /path/to/images/**/*": "/path/to/images 或 /path/to/images/**/*",
|
||
"Path to JSON file with concepts to train.": "帶有要訓練概念的 JSON 檔案的路徑。",
|
||
"path/to/output": "输出/路径",
|
||
"Path to save AnimateDiff motion modules": "AnimateDiff 运动模块保存路径",
|
||
"Path to save results of sadtalker": "Sadtalker 输出结果保存路径",
|
||
"Path to settings file you want to load. Path can be relative to webui folder OR full - absolute": "需要加载的设置文件路径。该路径可以相对于 SD-WebUI 根目录，也可以是完整的绝对路径",
|
||
"Pause": "暂停",
|
||
"Pause After N Epochs": "N 階段後暫停",
|
||
"PBRemTools": "精确背景去除工具",
|
||
"Percentage of tokens to be merged (higher improves speed)": "Token 合并的中词元被合并的百分比 (值越高速度提升越大)",
|
||
"performance": "性能",
|
||
"performance is measured in iterations per second (it/s) and reported for different batch sizes (e.g. 1, 2, 4, 8, 16...)": "性能以每秒多少迭代次数 (it/s) 作为单位，并按不同的单批数量 (如 1、2、4、8、16......) 进行报告。",
|
||
"Performance Wizard (WIP)": "效能嚮導（半成品）",
|
||
"Perform warmup": "进行预热",
|
||
"perlin": "柏林 (perlin)",
|
||
"Perlin noise is a more natural looking noise. It is heterogeneous and less sharp than uniform noise, this way it is more likely that new details will appear in a more coherent way. This is the new default setting.": "柏林噪声是一种看起来更自然的噪声。与均匀噪点相比，它具有异质性且不那么锐利，这种方法可以以更加连贯的方式出现新的细节。这是新版本的默认设置。",
|
||
"Perlin octaves": "柏林噪声倍频",
|
||
"Perlin persistence": "柏林噪声递增幅度",
|
||
"per side": "每边数量",
|
||
"persistent cond cache": "持久化调整缓存",
|
||
"Persistent cond cache": "持久化调整缓存",
|
||
"Personal CivitAI API key": "个人 CivitAI API 密钥",
|
||
"Perspective": "透视",
|
||
"Perspective Flip": "透视翻转",
|
||
"Perspective flip gamma": "透视翻转伽马值",
|
||
"Perspective flip phi": "透视翻转角度（垂直）",
|
||
"Perspective flip theta": "透视翻转角度（水平）",
|
||
"Perspective flip tv": "透视翻转消失点",
|
||
"Phone": "电话",
|
||
"photograph": null,
|
||
"Photographic": "Photographic (摄影)",
|
||
"photography": null,
|
||
"Photopea popup warning": "Photopea 弹窗警告",
|
||
"Pick Subfolder and Model Version": "选择子目录与模型版本",
|
||
"Pics to Interpolate": "要插值的图像",
|
||
"pin_light": "小光源",
|
||
"pipeline": "管线",
|
||
"Pipeline": "管线",
|
||
"Pix2Pix img CFG schedule": "Pix2Pix 圖像CFG排程",
|
||
"Pixel Art": "Pixel Art (像素艺术)",
|
||
"Pixel Composite Settings": "像素合成设置",
|
||
"Pixelize": "像素化",
|
||
"Pixel Perfect": "完美像素",
|
||
"Pixel size": "像素尺寸",
|
||
"Pixels to expand": "拓展的畫素數",
|
||
"Place added settings into an accordion": "将添加的设置置入一个手风琴容器中",
|
||
"(PLACEHOLDER, USE THE ONE IN 2IMG) Enable debug mode": "(本选项仅作占位，请使用生成图片页面中的相同选项) 启用调试模式",
|
||
"Place options in main UI into an accordion": "将选项置入主界面的一个手风琴式的容器中",
|
||
"Place this at back of generated prompt (suffix)": "此框填写的提示词放在生成提示词的后面 (后缀)",
|
||
"Place this in front of generated prompt (prefix)": "此框填写的提示词放在生成提示词的前面 (前缀)",
|
||
"Plain text / URL / Custom format": "纯文本 / URL / 自定义格式",
|
||
"Platform": "运行平台",
|
||
"Play notification sound after image generation": "完成图像生成后播放通知声音",
|
||
"Please add text prompts to generate masks": "请添加文本提示词以生成蒙版",
|
||
"Please always keep values in math functions above 0.": "请始终保证数学函数中的值大于 0",
|
||
"Please click": "请点击",
|
||
"Please enable the following settings to use controlnet from this script.": "请启用以下设置，以保证可以在此脚本中调用ControlNet。",
|
||
"Please press 'Refresh' to load selected content!": "请点击 \"刷新\" 按钮加载所选内容！",
|
||
"Please select a valid lightdiffusionflow or image file!": "请选择一个有效的 LightDiffusionFlow 或图像文件！",
|
||
"Please switch to 3D animation mode to view this section.": "请切换到 3D 动画模式来查看该部分",
|
||
"Please test on small images before actual upscale. Default params require denoise <= 0.6": "请在实际扩图前用小分辨率图像进行测试, 默认参数需求去噪强度小于或等于0.6",
|
||
"Please use smaller tile size when got CUDA error: out of memory.": "当出现 CUDA error: out of memory 时，使用更小的分块尺寸",
|
||
"Please use smaller tile size when see CUDA error: out of memory.": "如果看到 CUDA 錯誤：out of memory ，請降低分塊尺寸。",
|
||
"Plugin first": "扩展优先",
|
||
"PNG info": "PNG 图片信息",
|
||
"PNG Info": "圖片資訊",
|
||
"PNG info directory": "PNG 資訊目錄",
|
||
"PNGs": "图片（PNG格式）",
|
||
"point1 x": "X 轴点 1",
|
||
"point1 y": "Y 轴点 1",
|
||
"point2 x": "X 轴点 2",
|
||
"point2 y": "Y 轴点 2",
|
||
"point3 x": "X轴点 3",
|
||
"point3 y": "Y 轴点 3",
|
||
"Pointillism": "Pointillism (点画派)",
|
||
"points_per_batch": "每批采样点",
|
||
"points_per_side": "每边采样点",
|
||
"Pokémon": "Pokémon (宝可梦)",
|
||
"polylines_sharp": "多边形算法 - 锐利",
|
||
"polylines_soft": "多边形算法 - 柔和",
|
||
"Pooling Avg": "池化平均值",
|
||
"Pooling Max": "池化最大值",
|
||
"pop art": null,
|
||
"Pop Art": "Pop Art (波普艺术)",
|
||
"popular": null,
|
||
", port for AUTOMATIC1111's webui maintained by": "，由 AUTOMATIC1111 的 WebUI 維護的端口",
|
||
"portrait": null,
|
||
"Pose": "姿势",
|
||
"Pose style": "姿态样式",
|
||
"Position (center to edge)": "位置 (中心到边缘)",
|
||
"Positioning the effect on the y-axis": "在 Y 轴定位效果",
|
||
"Position (left to right)": "位置 (从左到右)",
|
||
"Positions": "位置",
|
||
"positive": "正向",
|
||
"Positive Filter": "Positive 过滤器",
|
||
"➕ Positive Mask": "➕ 正向蒙版",
|
||
"Positive / Negative Prompts": "正向 / 反向提示词",
|
||
"Positive prompt mode": "正向提示词模式",
|
||
"positive prompt to be appended to *all* prompts": "正向提示词会被添加到所有提示词中",
|
||
"Post-Inpainting (After swapping)": "后重绘 (变换后)",
|
||
"Postprocess": "后期处理",
|
||
"Postprocessing": "後處理",
|
||
"Post Processing": "后期处理",
|
||
"Post-Processing": "後處理",
|
||
"Post-Processing & Advanced Mask Options": "后期处理 & 高级蒙版设置",
|
||
"Post-processing and mask settings for unit faces. Best result : checks all, use LDSR, use Codeformer": "适用于面部单元的后期处理和蒙版设置。最好的结果: 检查所有设置，启用 LSDR，启用 Codeformer",
|
||
"Postprocessing operation order": "後處理操作順序",
|
||
"Postprocess (latent)": "后期处理 (潜空间)",
|
||
"Precision": "精度",
|
||
"Precision for (attention:1.1) when editing the prompt with Ctrl+up/down": "通过 Ctrl+Up/Down 编辑形如 (attention:1.1) 词条的精度",
|
||
"Precision for <extra networks:0.9> when editing the prompt with Ctrl+up/down": "通过 Ctrl+Up/Down 编辑形如 <extra networks:0.9> 词条的精度",
|
||
"Pre-defined aspect ratio buttons (1:1, 4:3, 16:9, 9:16, 21:9)": "纵横比按钮预设 (输入格式: 1:1, 4:3, 16:9, 9:16, 21:9)",
|
||
"Pre-defined percentage buttons (75, 125, 150)": "百分比按钮预设 (输入格式: 75, 125, 150)",
|
||
"Pre-defined percentage display format": "百分比预设显示格式",
|
||
"predicted_iou_threshold": "预测交并比阈值",
|
||
"pred_iou_thresh": "预测滤波阈值",
|
||
"Preferred VAE": "偏好VAE",
|
||
"Preferred VAE: refresh": "首选 VAE: 刷新",
|
||
"Preferred weight": "首選權重",
|
||
"Prefix": "前缀",
|
||
"prefix AND prompt + suffix": "prefix AND prompt + suffix (前缀 AND 提示词 + 后缀)",
|
||
"prefix + prefix + prompt + suffix": "prefix + prefix + prompt + suffix (前缀 + 前缀 + 提示词 + 后缀)",
|
||
"Pre-Inpainting (before swapping)": "预重绘 (变换前)",
|
||
"Pre-inpainting sends face to inpainting before swapping": "在变换前后发送图像到局部重绘进行重绘",
|
||
"Preload images at startup for first tab": "在启动时为第一个选项卡预载图像",
|
||
"prepare ebsynth": "预处理 Ebsynth",
|
||
"prepare environment": "准备环境",
|
||
"prepend": "放前面",
|
||
"Prepend": "添加到开头",
|
||
"Prepend additional tags": "将额外标签前置",
|
||
"preprocess": "预处理",
|
||
"Preprocess": "預處理",
|
||
"Preprocess images": "圖像預處理",
|
||
"Pre-Processing": "预处理",
|
||
"Preprocessing steps": "预处理步骤",
|
||
"Preprocessor": "預處理器",
|
||
"Preprocessor Preview": "預處理器預覽",
|
||
"Preprocessor resolution": "預處理器解析度",
|
||
"Preprocessor Resolution": "预处理器分辨率",
|
||
"Prerequisites and Important Info:": "前提条件和重要信息：",
|
||
"Preset": "预设",
|
||
"Preset Manager": "预设管理器",
|
||
"Preset Name": "预设名",
|
||
"Presets": "预设",
|
||
"Preset Weights": "预设权重",
|
||
"Preset_Weights": "预设权重",
|
||
"Pretrained VAE Name or Path": "預訓練 VAE 名稱或路徑",
|
||
"Prev batch": "上一批",
|
||
"Prevent empty spots in grid (when set to autodetect)": "（啟用自動偵測時）防止宮格圖中出現空位",
|
||
"Prevents overfit by clipping gradient norms. Default value is 0.0. Recommended value for Lora is 1.0": "通过裁剪梯度归一层防止过拟合。默认 0.0。推荐 Lora 使用 1.0 。",
|
||
"Prevent Stability-AI's ldm/sgm modules from printing noise to console.": "阻止 Stability-AI 的 ldm/sgm 模块向控制台打印垃圾信息",
|
||
"Preview": "预览",
|
||
"Preview annotator result": "预览预处理结果",
|
||
"Preview as Input": "预处理结果作为输入",
|
||
"Preview automatically when add/remove points": "添加/删除标记点时自动预览",
|
||
"Preview Image": "预览图像",
|
||
"Preview image negative prompt": "预览图反向提示词",
|
||
"Preview image prompt": "预览图提示词",
|
||
"Preview Image Selection": "预览图像选择",
|
||
"Preview mask": "预览蒙版",
|
||
"Preview motion only. Uses a static picture for init, and draw motion reference rectangle.": "仅预览运动效果。使用一张静态图片进行初始化，然后绘制运动参考矩形",
|
||
"Preview Segmentation": "预览分离结果",
|
||
"Preview segmentation image": "预览语义分割图像",
|
||
"Previous": "Previous (上一生成帧)",
|
||
"Prev page": "上一页",
|
||
"Prev Page": "上一頁",
|
||
"Primary model": "模型 A",
|
||
"Primary model (A)": "主要模型（A）",
|
||
"Primary model (A): refresh": "模型 A: 刷新",
|
||
"primitivism": null,
|
||
"Print": "输出",
|
||
"Print a list of Textual Inversion embeddings when loading model": "加载模型时在控制台打印 Textual Inversion embeddings 模型列表信息",
|
||
"Print all deviations": "输出所有偏移量",
|
||
"print change": "打印变更",
|
||
"Print debug logs to the console": "在控制台顯示除錯訊息。",
|
||
"Print extra hypernetwork information to console.": "將額外的超網路資訊印到控制台。",
|
||
"Print image deletion messages to the console": "將圖像刪除訊息打印到控制台",
|
||
"Print prompts to console when generating with txt2img and img2img.": "在控制台打印文生图和图生图生成图像时使用的提示词",
|
||
"Print stack traces before exiting the program with ctrl+c.": "在使用 Ctrl + C 退出程序前打印堆栈跟踪信息",
|
||
"Print warning logs to the console": "在控制台顯示警告訊息",
|
||
"Prior Loss": "先前的損失",
|
||
"Prior Loss Target": "先前損失目標",
|
||
"Prior loss weight.": "先验损失权重",
|
||
"Prior Loss Weight": "先前損失權重",
|
||
"Process given file(s) under the input folder, seperate by comma": "指定在输入文件夹中要处理图像的文件名 (使用逗号隔开)",
|
||
"Process Hires. fix": "处理高清修复",
|
||
"Process images in a directory on the same machine where the server is running.": "處理伺服器主機上的某一個目錄中的圖像。",
|
||
"processing |": "处理中 |",
|
||
"Process & Save": "处理 & 保存",
|
||
"Process Stage": "过程步骤",
|
||
"Process Text": "处理文本",
|
||
"Process type": "处理类型",
|
||
"Produce an image that can be tiled.": "生成可用於平舖的圖像",
|
||
"(produce a tileable picture)": "(生成可衔接拼贴的图片)",
|
||
"Progressbar and preview update period": "进度条/预览图更新周期",
|
||
"Progressbar/preview update period, in milliseconds": "进度条/预览图更新周期 (毫秒)",
|
||
"Project": "项目",
|
||
"Project directory": "工程目录（不可包含中文、下换线和特殊符号）",
|
||
"project setting": "工程设置",
|
||
"🎉 Promo": "🎉 广告",
|
||
"prompt": "提示詞",
|
||
"Prompt": "提示詞",
|
||
"prompt 1": "提示词①",
|
||
"prompt 2": "提示词②",
|
||
"prompt 4": "提示词④",
|
||
"prompt 5": "提示词⑤",
|
||
"Prompt attention parser": "提示词注意力解析器",
|
||
"Prompt Changes": "提示词调整",
|
||
"Prompt compounder": "提示词混合",
|
||
"Prompt editing": "提示词编辑",
|
||
"Prompt-Ex": "提示词-Ex",
|
||
"Prompt fields": "提示词段",
|
||
"Prompt for face": "针对脸部的提示词",
|
||
"Prompt for Face": "脸部提示词",
|
||
"Prompt for hires fix pass.\nLeave empty to use the same prompt as in first pass.": "用于高分修复层的正向提示词\n留空以使用与第一层相同的提示词",
|
||
"Prompt Formatter": "提示词规范化",
|
||
"Prompt for upscale (added to generation prompt)": "用于放大的正向提示词 (追加到生成提示词后)",
|
||
"prompting": "提示詞",
|
||
"Prompt Magic": "提示詞魔法",
|
||
"Prompt matrix": "提示詞矩陣",
|
||
"Prompt mode": "提示词模式",
|
||
"Prompt Mode": "提示词模式",
|
||
"Prompt mode guide": "提示词模式指南",
|
||
"Prompt (press Ctrl+Enter or Alt+Enter to generate)": "提示詞（按 Ctrl+Enter 或 Alt+Enter 產生）",
|
||
"Prompt\n(Press Ctrl+Enter to generate, Alt+Enter to skip, Esc to interrupt)": "正向提示词 Prompt\n(按 Ctrl+Enter 开始生成，Alt+Enter 跳过当前图片，ESC 停止生成)",
|
||
"Prompts": "提示詞",
|
||
"Prompts are stored in JSON format. If you've got an error, check it in a": "提示词以 JSON 格式存储。如果有错误，请在 ",
|
||
"Prompts are stored in JSON format. If you've got an error, check it in the validator,": "提示词以 JSON 格式保存。如有误，请前往校验器检查: ",
|
||
"Prompts are stored in JSON format. If you've got an error, check it in validator,": "提示词以 JSON 格式存储。如果您有错误，请在验证器中检查，",
|
||
"Prompt seperator": "提示词分隔符",
|
||
"Prompt seperator mode": "提示词分隔模式",
|
||
"prompts for your animation in a JSON format. Use --neg words to add 'words' as negative prompt": "动画的提示词以 JSON 格式储存。使用 --neg 字段去添加反向提示词",
|
||
"Prompts from file or textbox": "從文字方塊或檔案載入提示詞",
|
||
"Prompts from png info will be appended to prompts set in ui.": "從 PNG 資訊中提取的提示詞將被附加到 UI 中設定的提示詞集。",
|
||
"Prompts negative": "反向提示词",
|
||
"Prompts positive": "正向提示词",
|
||
"Prompt template": "提示模板",
|
||
"Prompt template: refresh": "提示词模板: 刷新",
|
||
"Prompt to be visualized": "用于可视化的提示词",
|
||
"Prompt Translator": "提示詞翻譯器",
|
||
"Prompt, will append to your t2i prompt": "追加提示词",
|
||
"Prompt word wrap length limit": "提示词换组长度限制",
|
||
"Provider": "提供方",
|
||
"Proxy": "代理",
|
||
"Proxy to use for fetching models and model data. Format: http://127.0.0.1:port": "用于获取模型和模型数据的代理 (格式: http://127.0.0.1:端口号)",
|
||
"prune": "裁剪",
|
||
"Pruning Methods": "模型修剪",
|
||
"psychedelic": null,
|
||
"Psychedelic": null,
|
||
"Psychedelic Art": null,
|
||
"Pure Noise": "纯噪声",
|
||
"Push File To 🤗": "将文件推送到 🤗",
|
||
"Push File to 🤗 Hugging Face": "将文件推送到 🤗 Hugging Face",
|
||
"Push Folder To 🤗": "将文件夹推送到 🤗",
|
||
"Push Folder to 🤗 Hugging Face": "将文件夹推送到 🤗 Hugging Face",
|
||
"(puts prompt and negative prompt inside the Generate tab, leaving more vertical space for the image on the right)": "(将正反提示词输入框限制在 “生成” 选项卡的左侧，为右侧图像留出更多垂直空间)",
|
||
"Put variable parts at start of prompt": "把可變部分放在提示詞的開頭",
|
||
"Put weight sets. float number x 25": "输入权重，共 25 个浮点数，逗号分隔",
|
||
"quad": "二階",
|
||
"Quality": "质量",
|
||
"Quality for saved jpeg images": "儲存的 JPEG 圖像的品質",
|
||
"Quality Gate": "质量把关",
|
||
"Quantize": "量化",
|
||
"query": "查詢",
|
||
"queue:": "排队中: ",
|
||
"Queued": "已排队",
|
||
"Queued At": "队列于",
|
||
"Queue front": "添加到队列前",
|
||
"quick": "快速",
|
||
"Quick": "快速设置",
|
||
"Quick batch": "快速批处理",
|
||
"Quick Guide": "快速指引",
|
||
"Quick Save": "快速保存",
|
||
"Quicksettings list": "快捷設定列表",
|
||
"Quicksettings position": "快速设置位置",
|
||
"radio-buttons": "单选按钮",
|
||
"random": "隨機",
|
||
"Random choices": "隨機選擇",
|
||
"Randomize For Each Iteration": "随机化每次迭代生成",
|
||
"Randomize Sampler": "随机化采样方法",
|
||
"Randomize Style": "随机样式",
|
||
"Random Jitter": "随机抖动",
|
||
"Randomly decide to flip images horizontally.": "随机决定是否水平翻转图像。",
|
||
"Randomly selects a keyword from the prompt and adds emphasis to it. Try this with Fixed Seed enabled.": "隨機強調提示詞中的一個關鍵詞，嘗試前要啟用固定隨機種子",
|
||
"Random Mode": "随机模式",
|
||
"Randomness": "隨機度",
|
||
"Random number generator source.": "随机数生成来源",
|
||
"Random number generator source. Changes seeds drastically. Use CPU to produce the same picture across different vidocard vendors.": "随机数的生成来源。大幅度改变种子。使用CPU来在不同型号显卡间产生相同的图像",
|
||
"Random prompt": "隨機提示詞",
|
||
"Random seed for ToMe partition": "Token 合并分区的随机数种子",
|
||
"range": "范围",
|
||
"Range": "范围",
|
||
"ranking": "評等",
|
||
"ranking filter": "以評等篩選",
|
||
"Ranking filter": "评分过滤器",
|
||
"rating": "評分",
|
||
"Rating": "評分",
|
||
"Rating confidences": "评分置信度",
|
||
"Rating confidents": "评分置信度",
|
||
"Ratings and included tags": "评分并包含标签",
|
||
"Raw percentage (50%, 150%)": "原始百分比（50％，150％）",
|
||
"Read Caption from Selected Image": "从选择的图片中读取描述",
|
||
"Read generation parameters from prompt or last generation if prompt is empty into user interface.": "從提示詞中讀取生成參數，如果提示詞為空，則讀取上一次的生成參數到使用者介面",
|
||
"read_last_image": "载入上次图像",
|
||
"read_last_settings": "载入上次设置",
|
||
"README": "README",
|
||
"*READ ME before you use this mode!*": "*请在使用前认真阅读*",
|
||
"read metadata": "读取元数据",
|
||
"Read metadata from selected checkpoints": "从所选模型中读取元数据",
|
||
"Read parameters (prompt, etc...) from txt2img tab when making previews": "進行預覽時，從文生圖頁籤中讀取參數（提示詞等）",
|
||
"Read prompts from text boxes": "读取文本框中的提示词",
|
||
"Read tabular commands": "读取 tabular 命令",
|
||
"Read tags from text files": "从文本文件中读取提示词",
|
||
"Real Estate": "Real Estate (房地产摄影)",
|
||
"realism": null,
|
||
"reallybigname": null,
|
||
"Reapply ranking after moving files": "移动文件后重新评分",
|
||
"Rebuild exif cache": "重建 EXIF 缓存",
|
||
"Recipe": "配方",
|
||
"Recolor": "Recolor (重上色)",
|
||
"recolor_intensity": "recolor_intensity (重上色 - 调节 “图像强度” 以去色)",
|
||
"recolor_luminance": "recolor_luminance (重上色 - 调节 “图像亮度” 以去色)",
|
||
"recombine ebsynth": "重组 Ebsynth",
|
||
"Recommended inference settings": "推荐生成设置",
|
||
"Recommended settings: Sampling Steps: 80-100, Sampler: Euler a, Denoising strength: 0.8": "推薦設定：取樣疊代步數：80-100，取樣器：Euler a，重繪幅度：0.8",
|
||
"Recommended to set tile sizes as large as possible before got CUDA error: out of memory.": "建议在得到 CUDA error: out of memory 报错前尽可能大的设置编码器分块大小",
|
||
"Recommend enabling the following settings.": "建议启用以下设置：",
|
||
"Reconstruct prompt from existing image and put it into the prompt field.": "從現有的圖像中重構出提示詞，並將其放入提示詞的輸入文字方塊",
|
||
"record": "记录",
|
||
"Recreate hash for existing files": "为已存在文件重建哈希",
|
||
"Rectangular": "矩形",
|
||
"Recursively search for wildcards": "递归检索通配符",
|
||
"red-cyan-anaglyph": "红蓝浮雕效果",
|
||
"red/green/blue": "red(红)/green(绿)/blue(蓝)",
|
||
"Redo generation": "重做生成",
|
||
"Re-enable the bug that trained the tenc embedding layer for LoRA.": "重新启用 LoRA 训练文本编码器 (tenc) 嵌入层的错误。",
|
||
"Reference": "Reference (参考)",
|
||
"reference_adain": "reference_adain (仅参考输入图 - 自适应实例规范)",
|
||
"reference_adain+attn": "reference_adain+attn (仅参考输入图 - 自适应实例规范 + 關聯)",
|
||
"Reference Control (enabled with image below)": "通过参考图像控制 (仅当下方有输入图时启用)",
|
||
"Reference Control Mode": "参考控制模式",
|
||
"Reference Control Weight": "参考控制权重",
|
||
"Reference Image": "参考图像",
|
||
"Reference Image Resize Mode": "参考图像缩放模式",
|
||
"Reference is an image. First face will be extracted.": "需要一张图像进行参考。提取第一张图的面部",
|
||
"reference_only": "reference_only (仅参考输入图)",
|
||
"Reference-Only": "Reference-Only (仅参考)",
|
||
"Reference-Only Control (enabled only when a reference image below is present)": "Reference-Only Control（仅当下方有参考图时启用）",
|
||
"Reference source face : start from 0": "参考面部源: 从 0 开始",
|
||
"Reference Type for Reference-Only": "仅参考模式的参考类型",
|
||
"Ref image (for conviently locate regions)": "参考图（用于方便定位区域）",
|
||
"Refiner checkpoint": "Refiner 模型",
|
||
"Refiner Denosing Fraction:": "Refiner 重绘切换时机:",
|
||
"Refiner model": "Refiner 模型",
|
||
"Refiner Model": "Refiner 模型",
|
||
"Refiner Model ID": "Refiner 模型 ID",
|
||
"Refiner options": "Refiner 选项",
|
||
"Refiner switch at": "Refiner 切换时机",
|
||
"reflection": "反射",
|
||
"reflection will attempt to approximate the image and tile/repeat pixels": "反射模式下会尝试近似图像并平铺/重复像素",
|
||
"refresh": "重新整理",
|
||
"Refresh": "重新整理",
|
||
"Refresh all checkpoint preview info": "刷新所有模型预览信息",
|
||
"Refresh Civitai Helper": "刷新 Civitai 助手",
|
||
"Refresh Civitai Helper's additional buttons": "刷新 Civitai 助手的附加按钮",
|
||
"Refresh Civitai Helper's model card buttons": "刷新 Civitai 助手 的模型卡片按钮",
|
||
"Refresh data": "刷新数据",
|
||
"Refresh extension list": "刷新扩展列表",
|
||
"Refresh internal temp files": "刷新内部临时文件",
|
||
"Refresh models": "重新整理模型列表",
|
||
"Refresh openOutpaint": "重新整理開源圖像擴展",
|
||
"Refresh page": "刷新页面",
|
||
"Refresh Style": "刷新样式",
|
||
"Refresh TAC temp files": "刷新 TAC 缓存文件",
|
||
"refresh textual inversion templates": "刷新嵌入式模板",
|
||
"refresh VAE": "刷新 VAE",
|
||
"Refresh wildcards": "重新整理萬用字元",
|
||
"Regenerate": "重新生成",
|
||
"regex - e.g. ^(?!.*Hires).*$": "正则表达式 - 如 ^(?!.*Hires).*$",
|
||
"Region": "区域数",
|
||
"Region 1": "区域 1",
|
||
"Region 2": "区域 2",
|
||
"Region 3": "区域 3",
|
||
"Region 4": "区域 4",
|
||
"Region 5": "区域 5",
|
||
"Region 6": "区域 6",
|
||
"Region 7": "区域 7",
|
||
"Region 8": "区域 8",
|
||
"Region Prompt Control": "分区提示词控制",
|
||
"Regions": "區域",
|
||
"Regular expression; if weights's name matches it, the weights is not written to the resulting checkpoint. Use ^model_ema to discard EMA weights.": "正則表達式；如果 weights 的名稱與其匹配，則不將 weights 寫入得到的檢查點。使用 ^model_ema 丟棄 EMA weights。",
|
||
"Regular expression pattern for blocking terms out of the generated prompt. Applied case-insensitively. For instance, to block both \"purple\" and \"interdimensional\", you could use the pattern \"purple|interdimensional\".": "用於排除提示詞語的表達式。忽略大小寫。例如，要封鎖 'purple' 和 'interdimensional'，可以使用 'purple | interdimensional'",
|
||
"Related to original file": "与原始文件相关",
|
||
"Related to output file": "与输出文件相关",
|
||
"Relative": "相对",
|
||
"Release notes": "發布說明",
|
||
"Reload Cache List": "重载缓存列表",
|
||
"Reload checkpoint": "刷新模型列表",
|
||
"Reload Checkpoints": "重新加载模型",
|
||
"🔄 Reload ComfyUI interfaces (client side)": "🔄 重载 ComfyUI 界面 (客户端)",
|
||
"Reload custom script bodies (No ui updates, No restart)": "重新載入自訂指令碼主體（使用者介面不刷新，不重新啟動）",
|
||
"reload hypernetworks": "重载超网络",
|
||
"Reloading...": "正在重新加载...",
|
||
"Reload model back to VRAM": "重新加载模型到显存",
|
||
"Reload Presets": "重载预设",
|
||
"Reload/Save Settings (config.json)": "重新载入/保存设置 (config.json)",
|
||
"Reload scripts": "重载脚本",
|
||
"🔄 Reload settings": "🔄 重新加载设置",
|
||
"Reload settings": "重新载入设置",
|
||
"Reload Tags": "重载标签",
|
||
"Reload the last SD checkpoint back into VRAM": "重新載入上一個模型權重存檔點至 VRAM",
|
||
"Reload UI": "重新載入 UI",
|
||
"Reload UI needed to apply": "需重载前端",
|
||
"Reload UI scripts when using Reload UI option": "当使用 “重载 UI” 选项时重新加载 UI 脚本",
|
||
"Reloat List": "重新加载列表",
|
||
"remake dimension": "重制维度",
|
||
"Remember this choice?": "记住这个选择？",
|
||
"Remote": "远程",
|
||
"➖ Remove": "➖ 移除",
|
||
"Remove": "移除",
|
||
"Remove all point prompts": "移除所有标记点",
|
||
"Remove Auto Trans": "移除自動翻譯的文字",
|
||
"Remove background": "移除背景",
|
||
"Remove background image": "移除背景图片",
|
||
"Remove batch": "移除批次选择",
|
||
"Remove cfg": "移除提示词引导系数 (CFG)",
|
||
"Remove checkboxes": "移除复选框",
|
||
"Remove dimensions": "移除分辨率",
|
||
"Remove duplicated tag": "删除重复标签",
|
||
"Remove duplicate prompts": "删除重复提示词",
|
||
"Remove duplicate tags": "移除重复标签",
|
||
"Remove empty prompts": "删除空提示词",
|
||
"Remove from saved directories": "從已儲存的目錄移除",
|
||
"Remove head": "移除头帧",
|
||
"Remove hires_fix": "移除高分辨率修复 (Hires. fix)",
|
||
"Remove Image": "移除图像",
|
||
"Remove inpaint": "移除局部重绘",
|
||
"Remove last": "删除最后一条",
|
||
"remove_model_button": "移除模型按钮",
|
||
"Remove motion module from any memory": "从内存卸载动画模型",
|
||
"Remove occluded edges": "移除遮挡边缘",
|
||
"Remove override_settings": "移除覆盖设置",
|
||
"Remove sampler": "移除采样方法",
|
||
"Remove scripts": "移除脚本",
|
||
"Remove sd_model_checkpoint": "移除 stable diffusion checkpoint 模型",
|
||
"Remove sd_vae": "移除 SD VAE (外挂 VAE 模型)",
|
||
"Remove seed": "移除随机数种子",
|
||
"Remove selected": "移除当前选择的图片",
|
||
"Remove selected tags": "移除选中标签",
|
||
"Remove selection [Delete]": "移除选择 [删除]",
|
||
"Remove tail": "移除尾帧",
|
||
"Remove this model": "移除此模型",
|
||
"Remove token_merging_ratio": "移除 Token 合并比率",
|
||
"renaissance": "renaissance (文艺复兴)",
|
||
"Renaissance": "Renaissance (文艺复兴)",
|
||
"Rename keyframes.": "重命名关键帧。",
|
||
"rename_model_button": "重命名模型按钮",
|
||
"Rename New": "重新命名",
|
||
"Rename this model": "重命名此模型",
|
||
"Renoise kernel size": "重铺噪声大小",
|
||
"Renoise strength": "重铺噪声强度",
|
||
"repeats the edge of the pixels, and extends them. Animations with quick motion may yield lines where this border function was attempting to populate pixels into the empty space created.": "重复并延长像素的边缘。快速运动镜头类型的动画可能会产生线条，边界函数会试图将像素填充到创建的空隙中",
|
||
"Replace": "替换",
|
||
"Replace new-line character with comma": "用逗号替换换行符",
|
||
"Replace Old Metadata Formats*": "*替换旧版元数据格式*",
|
||
"Replace or save the selected component.": "替换或保存所选组件",
|
||
"Replace preview": "替換預覽",
|
||
"replace_preview_button": "替换预览图像按钮",
|
||
"replace preview image with currently selected in gallery": "用当前网页输出中选中的图像替换预览图像",
|
||
"-> Replace tag, ..": "-> 替换标签, ..",
|
||
"Replace Text": "替换文本",
|
||
"Replace underscores with spaces on insertion": "插入時將下橫線替換成空格",
|
||
"Replace '_' with ' '(Does not affect the function to add tokens using add_token.txt.)": "用空格替换下划线（不影响使用 add_token.txt 添加 Token 的功能）",
|
||
"replicate": "複製",
|
||
"Report a bug": "回報錯誤",
|
||
"Request browser notifications": "請求瀏覽器通知",
|
||
"(requires Reload UI)": "(需要重载 UI)",
|
||
"(requires restart)": "(需要重启)",
|
||
"(Requires the": "(需要安装 ",
|
||
"Requires the": "需要安装 ",
|
||
"(Requires UI reload)": "(需重载 UI)",
|
||
", Requires UI reload)": ", 需重载 UI )",
|
||
"(Requires Web-UI restart)": "(需重启 Web-UI)",
|
||
"(Requires Web-UI Restart)": "(需要重启 Web-UI)",
|
||
"reroll": "回滚",
|
||
"Reroll blank frames": "回滚空白帧",
|
||
"Reroll patience": "回滚最大次数",
|
||
"Re-run your combinatorial batch this many times with a different seed each time.": "這個選項表示用不同的種子重新運行組合產生的批次數據。在每次運行中，種子值都會改變，這樣可以產生不同的隨機順序或排列組合。",
|
||
"Reserved: total amout of video memory allocated by the Torch library ": "预留：Torch 库分配的显存总量",
|
||
"reset": "重置",
|
||
"↻ Reset": "↻ 重置",
|
||
"Reset": "重置",
|
||
"🎥 Reset Camera": "🎥 重置镜头",
|
||
"Reset CLIP ids": "重置 CLIP ID",
|
||
"reset current": "重置为当前",
|
||
"reset default": "重置为默认",
|
||
"Reset default (Reload UI needed to apply)": "重置为默认值（需重载UI）",
|
||
"Reset mixer": "重置合并设置",
|
||
"🧍 Reset Pose": "🧍 重置姿态",
|
||
"♻️ Reset settings": "♻️ 恢复默认设置",
|
||
"Reset Tile Size": "重置分块大小",
|
||
"- Reset zoom": "- 重置縮放",
|
||
"Reset Zoom": "重置缩放",
|
||
"Reset zoom and canvas position": "重设缩放和画布方位",
|
||
"Reset zoom and canvas positon": "重置缩放倍数和画布位置",
|
||
"resizable": "可缩放",
|
||
"resize": "缩放",
|
||
"Resize": "縮放比例",
|
||
"Resize and fill": "填充",
|
||
"Resize and Fill": "調整大小並填充",
|
||
"Resize by": "按比例調整大小",
|
||
"Resize height to": "將高度調整至",
|
||
"Resize image to target resolution. Unless height and width match, you will get incorrect aspect ratio.": "將圖像大小調整為目標解析度。除非高度和寬度匹配，否則你將獲得不正確的縱橫比",
|
||
"Resize mode": "縮放模式",
|
||
"Resize Mode": "縮放模式",
|
||
"Resize result back to original dimensions": "将结果调整回原始尺寸",
|
||
"Resize seed from height": "高度（縮放種子）",
|
||
"Resize seed from width": "寬度（縮放種子）",
|
||
"Resizes image to this height. If 0, height is inferred from either of two nearby sliders.": "將圖像調整到此高度。如果為0，則高度會從兩個附近的滑塊之一推斷。",
|
||
"Resizes image to this width. If 0, width is inferred from either of two nearby sliders.": "將圖像調整到此寬度。如果為0，則寬度會從兩個附近的滑塊之一推斷。",
|
||
"Resize the image so that entirety of image is inside target resolution. Fill empty space with image's colors.": "調整圖像大小，使整個圖像在目標解析度內。用圖像的顏色填充空白區域",
|
||
"Resize the image so that entirety of target resolution is filled with the image. Crop parts that stick out.": "調整圖像大小，使整個目標解析度都被圖像填充。裁剪多出來的部分",
|
||
"Resize to": "調整大小至",
|
||
"Resize width to": "將寬度調整至",
|
||
"Resizing objective": "調整大小目標",
|
||
"Resolution": "解析度",
|
||
"Resolution:": "分辨率:",
|
||
"Resolutions:": "分辨率:",
|
||
"Resources": "其他资料",
|
||
"Restart debug": "重启调试",
|
||
"Restart server": "重启服务器",
|
||
"Restart UI": "重载前端",
|
||
"Restore Checkpoint": "还原模型",
|
||
"restore config state file": "恢复配置状态文件",
|
||
"Restore defaults": "恢复默认",
|
||
"Restore Face": "面部修复",
|
||
"Restore faces": "面部修復",
|
||
"Restore Faces": "面部修復",
|
||
"Restore faces after ADetailer": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 10th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 2nd": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 3rd": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 4th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 5th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 6th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 7th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 8th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 9th": "在 After Detailer 之后修复面部",
|
||
"Restore Faces, Tiling & more": "恢復臉部、平鋪和更多功能",
|
||
"Restore Last Scene": "恢复上次场景",
|
||
"Restore low quality faces using GFPGAN neural network": "使用 GFPGAN 神經網路修復低品質面部",
|
||
"Restore progress": "恢复进程",
|
||
"Restore Selected Config": "恢复所选配置",
|
||
"Restore settings after rendering a job": "生成任务结束后恢复设置",
|
||
"Restore settings to default": "恢复至默认设置",
|
||
"Restore system defaults": "恢复系统默认",
|
||
"Restore visibility": "面部修复强度",
|
||
"Result = A": "結果 = A",
|
||
"Result = A * (1 - M) + B * M": "結果 = A * (1 - M) + B * M",
|
||
"Result = A + (B - C) * M": "結果 = A + (B - C) * M",
|
||
"Result = \"A, B, C, X, Y\" (add X and Y to the end (default))": "结果 = \"A, B, C, X, Y\" （将 X 和 Y 添加至末尾(默认)）",
|
||
"Results": "结果",
|
||
"Result = \"X, C, E\" (A->\"\", B->X, D->\"\")": "结果 = \"X, C, E\" (A->\"\", B->X, D->\"\")",
|
||
"Result = \"X, Y, A, B, C\" (add X and Y to the beginning (\"Prepend additional tags\" checked))": "结果 = \"X, Y, A, B, C\" （将 X 和 Y 添加至开头(请勾选“将 tags 添加至开头”)）",
|
||
"Result = \"Y, Y, X, C\" (B->X, A->Y)": "结果 = \"Y, Y, X, C\" (B->X, A->Y)",
|
||
"Resume Animation": "繼續動畫",
|
||
"Resume from timestring": "從時間字串繼續執行",
|
||
"Resume & Run from file": "繼續執行並從檔案運行",
|
||
"Resume timestring": "從時間字串繼續執行",
|
||
"Retouch": "修复程度",
|
||
"Retro Arcade": "Retro Arcade (复古街机)",
|
||
"Retro Game": "Retro Game (复古游戏)",
|
||
"Return image with chosen live preview method on interrupt": "当生成过程中断时，通过所选的实时预览模式提供结果图像",
|
||
"Return mask": "回送蒙版",
|
||
"Reuse original image": "復用原圖",
|
||
"Reuse seed from last generation, mostly useful if it was randomed": "重用上一次使用的隨機種子，如果想要固定結果就會很有用",
|
||
"Reuse seed from last generation, mostly useful if it was randomized": "使用上一次生成所用的随机数种子，用于复现结果",
|
||
"Reverse": "反转",
|
||
"Reverse model sort order": "反向排序",
|
||
"revision_clipvision": "revision_clipvision (CLIP 集成嵌入图像提示 - 作为补充)",
|
||
"revision_ignore_prompt": "revision_ignore_prompt (CLIP 集成嵌入图像提示 - 忽略原有提示词)",
|
||
"rgb": "RGB",
|
||
"RGB to BGR": "RGB 转 BGR",
|
||
"rho": "rho (噪声密度)",
|
||
"RIFE v4.6 and FILM.": "RIFE v4.6 和 FILM.",
|
||
"right": "右",
|
||
"Right click generate forever menu": "右键单击打开无限生成菜单",
|
||
"right-left": "右 - 左",
|
||
"roll canvas clockwise/anticlockwise": "顺时针/逆时针滚动画布",
|
||
"Roll Channels": "三原色頻道輪替",
|
||
"Rolling factor": "梯度放大倍数",
|
||
"romanticism": "romanticism (浪漫主义)",
|
||
"rotate canvas clockwise/anticlockwise in degrees per frame": "以每帧多少度数顺时针/逆时针旋转画布",
|
||
"Rotate images (clockwise)": "旋转图像 (顺时针)",
|
||
"Rotation 3D X": "3D 旋轉 X",
|
||
"Rotation 3D Y": "3D 旋轉 Y",
|
||
"Rotation 3D Z": "3D 旋轉 Z",
|
||
"Round": "轮数",
|
||
"RPG Fantasy Game": "RPG Fantasy Game (角色扮演奇幻游戏)",
|
||
"run": "运行",
|
||
"Run": "執行",
|
||
"Run benchmark": "執行效能評測",
|
||
"Run Cleaner": "运行清理器",
|
||
"run command": "运行命令",
|
||
"Run ControlNet Inpaint": "运行 ControlNet 重绘",
|
||
"run extensions installers": "运行扩展安装程序",
|
||
"run from a list of setting .txt files. Upload them to the box on the right (visible when enabled)": "从TXT设置文件列表加载。上传它们到右侧框内 (启用后可见)",
|
||
"Run from Settings file": "從設定檔運行",
|
||
"Run Inpainting": "运行重绘",
|
||
"Run Inpainting on offline network (Models not auto-downloaded)": "脱机运行重绘 (不自动下载模型)",
|
||
"Run Merge": "开始合并",
|
||
"running benchmark may take a while. extensive tests may result in gpu out-of-memory conditions.": "运行基准测试需要花费大量时间。大量测试可能会导致 GPU 显存溢出。",
|
||
"Running ebsynth.(on your self)": "运行 Ebsynth。（自行操作）",
|
||
"Run on incomplete": "中断后仍然运行",
|
||
"Run Padding": "运行填充",
|
||
"Run preprocessor": "运行预处理",
|
||
"Run Rand": "开始运行随机",
|
||
"Run: Sampler, Width, Height, tiling, resize seed.": "运行参数： 采样方法，宽度，高度，平铺图，种子大小调整",
|
||
"Run: seed, subseed, subseed strength.": "运行参数：第二种子，第二种子强度",
|
||
"Run Segment Anything": "运行 Segment Anything",
|
||
"Run Segment Anything on CPU": "用 CPU 运行 Segment Anything",
|
||
"😭 SadTalker: Learning Realistic 3D Motion Coefficients for Stylized Audio-Driven Single Image Talking Face Animation (CVPR 2023)": "😭 SadTalker: 通过学习 3D 运动参数来制作的风格化音频驱动单图脸部说话动画 (CVPR 2023)",
|
||
"safetensors": "safetensors",
|
||
"SAG Mask Threshold": "SAG 蒙版阈值",
|
||
"Same Gender": "相同性别",
|
||
"same to Strength": "与强度相同",
|
||
"SAM Model": "SAM 模型",
|
||
"Sample Batch Size": "樣本批次大小",
|
||
"Sample CFG Scale": "樣本CFG比例",
|
||
"Sample Height": "樣本高度",
|
||
"Sample Image Generation": "生成樣本圖像",
|
||
"Sample Image Prompt": "樣本圖像提示詞",
|
||
"Sample Negative Prompt": "樣本反向提示詞",
|
||
"Sample Prompt": "樣本提示詞",
|
||
"Sample Prompt File": "樣本提示文件",
|
||
"Sample Prompts": "樣本提示詞",
|
||
"Sample Prompt Template File": "樣本提示詞範本檔案",
|
||
"sampler": "取樣器",
|
||
"Sampler": "取樣器",
|
||
"Sampler parameters": "取樣器參數",
|
||
"Sampler schedule": "取樣器排程",
|
||
"Sampler Settings": "采样方法设置",
|
||
"Sample Seed": "樣本種子",
|
||
"Sample Steps": "樣本步數",
|
||
"Sample Width": "樣本寬度",
|
||
"Sampling method": "取樣方法",
|
||
"Sampling method webui": "webui 采样方法",
|
||
"Sampling settings": "采样方法设置",
|
||
"Sampling steps": "取樣步驟",
|
||
"Sampling Steps": "採樣疊代步數",
|
||
"Sampling steps webui": "webui 采样迭代步数",
|
||
"SAM requires an input image. Please upload an image first.": "SAM 需要你先上传一张图片。",
|
||
"Sanity Sample Negative Prompt": "樣本反向提示詞",
|
||
"Sanity Sample Prompt": "樣本提示詞",
|
||
"Sanity Samples": "合理性采样样本",
|
||
"Sanity Sample Seed": "樣本種子",
|
||
"saturation": "饱和度",
|
||
"Saturation": "饱和度",
|
||
"save": "儲存",
|
||
"💾 Save": "💾 保存",
|
||
"Save": "儲存",
|
||
"Save 3D depth maps": "保存 3D 深度图",
|
||
"Save a checkpoint every N epochs.": "每 N Epochs 保存一次模型",
|
||
"Save a copy of embedding to log directory every N steps, 0 to disable": "每 N 步將嵌入的副本儲存到記錄目錄，0 表示停用",
|
||
"Save a copy of image before applying color correction to img2img results": "在對圖生圖結果套用顏色校正之前儲存圖像副本",
|
||
"Save a copy of image before applying highres fix.": "在做高解析度修復之前儲存初始圖像副本",
|
||
"Save a copy of image before doing face restoration.": "在進行面部修復之前儲存圖像副本",
|
||
"Save all changes": "保存所有更改",
|
||
"Save an csv containing the loss to log directory every N steps, 0 to disable": "每 N 步儲存一個包含 loss 的 CSV 檔案到記錄目錄，0 表示停用",
|
||
"Save and Test Webhook": "儲存並測試 Webhook",
|
||
"Save an image to log directory every N steps, 0 to disable": "每 N 步儲存一張圖像到記錄目錄，0 表示停用",
|
||
"save animation's depth maps as extra files": "额外保存动画深度图文件",
|
||
"save anime gif": "保存 GIF 动画",
|
||
"Save an .srt (subtitles) file with the generation info along with each animation": "随动画保存包含生成信息的.srt (字幕) 文件",
|
||
"Save as": "保存为",
|
||
"save as csv": "保存为 csv",
|
||
"Save as csv(default)": "保存为 csv (默认)",
|
||
"Save as float16": "以 float16 儲存",
|
||
"Save as half": "保存半精度模型",
|
||
"Save as preset": "保存为预设",
|
||
"Save as safetensors": "存为 SafeTensors 格式",
|
||
"save as txt": "保存为 txt",
|
||
"Save as txt": "保存为 txt",
|
||
"Save background instead of foreground": "保存背景而不是前景",
|
||
"Save Caption to .txt File": "储存描述文本为 .txt 文件",
|
||
"Save category (Windows only)": "儲存類別（僅限Windows）",
|
||
"Save changes": "保存更改",
|
||
"Save Checkpoint to Subdirectory": "保存檢查點到子目錄",
|
||
"Save Controlnet Data in ...": "保存 ControlNet 数据到...",
|
||
"Save copy of large images as JPG": "将超过大小限制的图像保存JPG副本",
|
||
"save csv": "保存 CSV ",
|
||
"Save Current Config": "保存当前配置",
|
||
"Save current settings": "保存当前设置",
|
||
"Save current settings as default": "将当前设置保存为默认值",
|
||
"Saved Configs": "已保存的配置",
|
||
"Saved Configs: refresh": "已保存的配置: 刷新",
|
||
"Saved directories": "已儲存的目錄",
|
||
"Save depth map": "保存深度图",
|
||
"Save DepthMap": "儲存深度圖",
|
||
"Save depth maps": "保存深度图",
|
||
"Save EMA Weights to Generated Models": "將 EMA 權重儲存到產生的模型中",
|
||
"Save every n epochs": "每 n 个 epoch 保存一次",
|
||
"Save format": "保存格式",
|
||
"Save generated images within tensorboard.": "在 TensorBoard 中儲存產生的圖像。",
|
||
"Save generation params text": "儲存生成參數文本",
|
||
"Save grids to a subdirectory": "將宮格圖儲存到子目錄",
|
||
"Save images": "保存图像",
|
||
"Save Images": "保存图像",
|
||
"Save images before ADetailer": "在进行后期细节修复前保存原始生成图片",
|
||
"(save images that has been interrupted in mid-generation; even if not saved, they will still show up in webui output.)": "(保存生成时被中断的图像; 即使没有保存, 他们依旧会显示在 webui 输出中)",
|
||
"Save images to a subdirectory": "將圖像儲存到子目錄",
|
||
"Save images with embedding in PNG chunks": "儲存圖像，並在 PNG 圖片檔案中嵌入檔案",
|
||
"Save incomplete images": "保存未完成的图像",
|
||
"Save init images when using img2img": "使用图生图时保存初始图像",
|
||
"Save JSON": "儲存為 JSON",
|
||
"Save LyCORIS models to Lora directory. Do not use this if you are on older versions of webui or you use an extension that handles LyCORIS models.": "将 LyCORIS 模型保存到 Lora 目录 (若使用旧版本 webui 或使用 LyCORIS 扩展，请勿启用本选项)",
|
||
"Save mask": "保存蒙版",
|
||
"Save masked image": "保存蒙版后图像",
|
||
"Save mask previews": "保存蒙版预览",
|
||
"save merged model ID to": "保存合并模型 ID 到",
|
||
"save metadata": "保存元数据",
|
||
"Save metadata": "保存元数据",
|
||
"Save Metadata": "儲存中繼資料",
|
||
"Save metadata as caption": "将元数据保存为描述文本",
|
||
"Save metadata (.safetensors only)": "保存元数据 (仅限 .safetensors)",
|
||
"save model": "保存模型",
|
||
"Save Model Frequency (Epochs)": "儲存模型頻率（訓練週期）",
|
||
"Save model info": "保存模型信息",
|
||
"Save Name": "保存文件名",
|
||
"Save Only": "仅保存",
|
||
"Save Original": "保存原件",
|
||
"Save original image": "保存原始图像",
|
||
"Save original image if face detection fails": "若面部检测失败则保存原始图像",
|
||
"Save original image with mask and bounding box": "保存带有蒙版和箱体的原始图像",
|
||
"Save Outputs": "保存输出结果",
|
||
"Save path for images": "图像保存路径",
|
||
"Save PNG": "儲存為 PNG",
|
||
"💾🧍 Save Pose": "💾🧍 保存姿态",
|
||
"save precision": "保存精度",
|
||
"Save preprocessed": "儲存預處理",
|
||
"Save Preset": "保存预设",
|
||
"Save Presets": "保存预设",
|
||
"Save preview": "儲存預覽",
|
||
"Save Preview(s) Frequency": "保存预览图的频率",
|
||
"Save Preview(s) Frequency (Epochs)": "儲存預覽頻率（訓練週期）",
|
||
"Save prompts as text file": "保存提示词到文本文件",
|
||
"Save ranking in image's pnginfo": "在PNG图片信息中保存评分",
|
||
"Save & Restart": "保存并重启",
|
||
"Save Scene": "保存场景",
|
||
"Save score as EXIF or PNG Info Chunk": "將分數儲存為 EXIF 或 PNG Info Chunk",
|
||
"Save separate diffusers snapshots when saving during training.": "在訓練期間保存獨立的模型。",
|
||
"Save separate diffusers snapshots when training completes.": "訓練完成後保存獨立的模型。",
|
||
"Save separate diffusers snapshots when training is canceled.": "當訓練被取消時保存獨立的模型。",
|
||
"save setting": "保存设置",
|
||
"Save Setting": "儲存設定",
|
||
"save settings": "储存设置",
|
||
"Save Settings": "儲存設定",
|
||
"Save settings as default": "将当前设置保存为默认值",
|
||
"Saves Optimizer state as separate *.optim file. Training of embedding or HN can be resumed with the matching optim file.": "將優化器狀態儲存為獨立的 *.optim 檔。嵌入或超網路的訓練可以使用相匹配的優化檔恢復。",
|
||
"Save style": "儲存樣式",
|
||
"Save Style": "保存样式",
|
||
"save successful": "保存成功",
|
||
"Save tags": "保存标签",
|
||
"Save Tags": "保存标签",
|
||
"Save tags after download": "下载后保存标签",
|
||
"Save tags (Windows only)": "儲存標籤（僅限Windows）",
|
||
"Save template to metadata: Write prompt template into the PNG metadata": "將範本保存至元數據：將提示詞範本寫入PNG數據中",
|
||
"Save text information about generation parameters as chunks to png files": "將有關生成參數的文本資訊，作為塊儲存到 PNG 圖片檔案中",
|
||
"Save textual inversion and hypernet settings to a text file whenever training starts.": "每次訓練開始時，將文本反轉和超網路設定儲存到一個文字檔案中。",
|
||
"Save the current merged model": "保存当前融合的模型",
|
||
"Save the image to a dedicated directory (log/images).": "保存图像到指定目录 (默认: log/images)",
|
||
"Save to Presets": "保存到预设",
|
||
"Save to tags files": "保存标签到文件",
|
||
"Save vector to text file": "将向量保存到文本文件",
|
||
"Save WebP in lossless format (highest quality, largest file size)": "保存为无损 WebP 格式 (最高质量，最大文件体积)",
|
||
"Save wildcards": "儲存萬用字元",
|
||
"Save with JSON": "保存为 JSON 格式",
|
||
"Save zip archive with images to a dedicated directory (log/images)": "保存包含图像的 .zip 文件到指定目录 (默认: log/images)",
|
||
"Saving": "儲存",
|
||
"Saving images": "图像保存",
|
||
"Saving images/grids": "儲存圖像 / 宮格圖",
|
||
"Saving the image to an existing file": "已有同名文件时的保存行为",
|
||
"Saving to a directory": "儲存到目錄",
|
||
"Scale": "放大倍率",
|
||
"Scale by": "等比縮放",
|
||
"Scale Factor": "比例因子",
|
||
"Scale Height": "高度比例",
|
||
"Scale Prior Loss": "縮放先前的損失",
|
||
"scale the canvas size, multiplicatively. [static = 1.0]": "缩放画布大小, 系数倍乘 [static = 1.0]",
|
||
"Scale to": "指定解析度縮放",
|
||
"Scale Width": "宽度比例",
|
||
"Scan": "扫描",
|
||
"Scan Exif-/.txt-data (initially slower, but required for many features to work)": "扫描图片的 Exif 信息与同名 txt 数据文件（初始读取速度较慢，许多功能都需要需要本选项启用）",
|
||
"Scan for:": "检索: ",
|
||
"Scan for available updates": "检索可用更新",
|
||
"Scan for duplicate models": "检索重复模型",
|
||
"Scan Models for Civitai": "扫描并匹配 Civitai 模型记录",
|
||
"Scanning takes time, just wait. Check console log for detail": "扫描需要一段时间，请耐心等待。检查控制台日志以查看详情。",
|
||
"Scanning takes time, just wait. Check console log for details": "扫描需要时间，请耐心等待。检查控制台日志以查看细节",
|
||
"scene": "scene (情景)",
|
||
"schedule": "参数表",
|
||
"Schedule controls how much the composite video is mixed in, whether set to mask is None or using a mask. This is the master mix.": "调度计划控制复合视频的混合比例，无论是否使用蒙版。这是主混合设置。",
|
||
"Scheduler": "调度器",
|
||
"Scheduler:": "采样方法: ",
|
||
"scheduler type": "调度器类型",
|
||
"Scheduler type": "调度器类型",
|
||
"science": "科學",
|
||
"sci-fi": null,
|
||
"Scoring type": "评分类型",
|
||
"screen": "濾色",
|
||
"Scribble": "Scribble (涂鸦)",
|
||
"scribble_hed": "scribble_hed (涂鸦 - 整体嵌套)",
|
||
"scribble_pidinet": "scribble_pidinet (涂鸦 - 像素差分)",
|
||
"Scribble/Sketch": "Scribble/Sketch (涂鸦/草图)",
|
||
"scribble_xdog": "scribble_xdog (涂鸦 - 强化边缘)",
|
||
"script": "指令碼",
|
||
"Script": "指令碼",
|
||
"Script Enabled": "启用脚本",
|
||
"Script first": "脚本优先",
|
||
"Script names to apply to ADetailer (separated by comma)": "应用于 After Detailer 的脚本名称 (用逗号分隔)",
|
||
"scripts": "脚本",
|
||
"scroll": null,
|
||
"sculpture": null,
|
||
"sd model (experimental)": "SD 模型 (实验性)",
|
||
"sd_model_hash": "SD模型雜湊值",
|
||
"sd-parseq manifest": "sd-parseq 配置文件",
|
||
"SD Unet: refresh": "SD Unet: 刷新",
|
||
"SD VAE": "模型的 VAE",
|
||
"SD VAE: refresh": "SD VAE: 刷新",
|
||
"(SD-WebUI v1.5 and higher treats LoCON's the same as LORA's, Requires UI reload)": "(SD-WebUI v1.5 及更高版本把 LoCon 视作 LORA, 需重载 UI )",
|
||
"(SD-WebUI v1.5 and higher treats LoCON's the same as LORA's, so they can be placed in the LORA folder.)": "(SD-WebUI v1.5 及更高版本把 LoCon 视作 LORA，所以 LoCon 也可放入 LORA 文件夹)",
|
||
"SDXL high aesthetic score": "SDXL 美学分数高值",
|
||
"SDXL low aesthetic score": "SDXL 美学分数低值",
|
||
"Seach models": "搜索模型",
|
||
"seamlessly blend original content with inpainted content": "将原始画面与重绘内容无缝混合",
|
||
"Seams denoise strenght": "接缝重绘幅度",
|
||
"Seams fix": "儲存接縫修復圖像",
|
||
"Seams Mask blur (offset pass only)": "接缝蒙版边缘模糊程度 (仅偏移层)",
|
||
"Seams padding": "接缝填充度",
|
||
"Seams Width": "接缝宽度",
|
||
"search": "检索",
|
||
"Search": "搜尋",
|
||
"Search...": "搜尋...",
|
||
"Search:": "检索：",
|
||
"Search and Replace": "搜索与替换",
|
||
"Search and Replace for all images displayed.": "搜索并替换所有显示的图像",
|
||
"Search and Replace in": "在何处搜索和替换",
|
||
"Search anything : Prompt, Size, Model, ...": "检索任意内容: 提示词, 尺寸, 模型, ...",
|
||
"Search by alias": "以別名搜尋",
|
||
"Search by translation": "以翻譯搜尋",
|
||
"Search CivitAI": "检索 CivitAI",
|
||
"Search for embeddings": "搜尋嵌入",
|
||
"Search for hypernetworks": "搜尋超網絡",
|
||
"Search for Loras": "搜尋 LoRA",
|
||
"Search for LyCORIS/LoHa": "检索 LyCORIS/LoHa 模型",
|
||
"Search for models": "搜索模型",
|
||
"Search for webui style names": "检索 webui 预设样式名城",
|
||
"Search for wildcards": "搜尋萬用字元",
|
||
"search huggingface models": "搜索 Huggingface 模型",
|
||
"Search in wildcard names...": "使用通配符名称检索...",
|
||
"Search Mode": "检索模式",
|
||
"Search models": "搜索模型",
|
||
"Search negative prompt": "搜尋反向提示詞",
|
||
"Search results": "搜索结果",
|
||
"Search tag, .. ->": "检索标签, .. ->",
|
||
"Search Tags": "检索标签",
|
||
"Search tags / Filter images by tags": "搜索标签 / 按标签筛选图像",
|
||
"Search tags / Filter images by tags (INCLUSIVE)": "通过搜索 / 筛选标签来过滤图片（包含）",
|
||
"Search Term:": "检索词: ",
|
||
"Search Text": "搜索文本",
|
||
"Search type:": "检索类型: ",
|
||
"Search workflows in subdirectories": "在子目录检索工作流",
|
||
"seascape": "seascape (海景)",
|
||
"Secondary model": "模型 B",
|
||
"Secondary model (B)": "次要模型（B）",
|
||
"Secondary model (B): refresh": "模型 B: 刷新",
|
||
"Secondary Upscaler": "二级放大算法",
|
||
"second pass": "第二层",
|
||
"seconds": "秒",
|
||
"Second upscaler": "第二放大方法",
|
||
"Security": "安全性",
|
||
"(See": "(查看 ",
|
||
"See": "檢視",
|
||
"seed": "種子",
|
||
"Seed": "隨機種子",
|
||
"Seed behavior": "种子行为",
|
||
"'seed_behavior' will be forcibly set to 'schedule'.": "“种子行为” 会被强制设为 “调度计划” 来进行调度",
|
||
"Seed for Random Ratio": "随机比率种子",
|
||
"seed for the whole video generation.": " 种子 (供整个视频生成过程使用)",
|
||
"Seed iter N": "种子迭代量 N",
|
||
"Seed of a different picture to be mixed into the generation.": "將要參與生成的另一張圖的隨機種子",
|
||
"Seed schedule": "种子调度计划",
|
||
"seed_schedule should start and end on the same seed.": "种子调度计划应该在同一种子上开始和结束",
|
||
"Seed training RNG. Useful for testing, but may cause minor performance reduction.": "RNG 随机数种子训练。对测试有用，也许会导致性能略微下降。",
|
||
"See here for explanation of each parameter.": "有关每个参数的说明，请点击 这里 查看。",
|
||
"See the progress.": "查看图像增强的实时预览进程",
|
||
"Seg": "Seg (语义分割)",
|
||
"seg_anime_face": "seg_anime_face (语义分割 - 动漫面部)",
|
||
"Segment Anything": "Segment Anything\n",
|
||
"Segment Anything Model ID": "Segment Anything 模型 ID",
|
||
"Segment Anything Output": "Segment Anything 输出",
|
||
"Segment Anything status": "Segment Anything 状态",
|
||
"Segmentation": "Segmentation (语义分割)",
|
||
"segmentation prompt": "图像切分提示词",
|
||
"Segmentation status": "语义分割状态",
|
||
"seg_ofade20k": "seg_ofade20k (语义分割 - OneFormer 算法 - ADE20k 协议)",
|
||
"seg_ofcoco": "seg_ofcoco (语义分割 - OneFormer 算法 - COCO 协议)",
|
||
"seg_ufade20k": "seg_ufade20k (语义分割 - UniFormer 算法 - ADE20k 协议)",
|
||
"Select": "選擇模型",
|
||
"Select a collection": "選擇選集",
|
||
"Select a component class or specific component.": "选择一个组件类或特定组件",
|
||
"Select activation function of hypernetwork. Recommended : Swish / Linear(none)": "選擇超網路（Hypernetwork）的激活函數。建議：Swish／Linear（線性，等於不用）",
|
||
"Select a device": "选择设备",
|
||
"select all": "全选",
|
||
"Select a local config for the model from the configs directory of the webui root": "从 webui 根目录中的配置目录中选取本地配置",
|
||
"Select a sampling method": "选择采样方法",
|
||
"Select blocks to change": "选择需要改动的分块",
|
||
"Select brush color": "选择画笔颜色",
|
||
"Select components to hide": "选择要隐藏的组件",
|
||
"(select Disco output format).": "（選擇Disco輸出格式）。",
|
||
"selected": "选中的",
|
||
"Selected": "已選取",
|
||
"Selected image": "当前所选图片",
|
||
"Selected Image :": "选择图片",
|
||
"(selected items appear first)": "(选中组件优先显示)",
|
||
"Selected models for sharing": "可选共享的模型",
|
||
"Selected One": "选择一个",
|
||
"Selected Tags": "选中的标签",
|
||
"selected tags from the images displayed.": "来自显示图像中已选择的标签",
|
||
"Selected VAE overrides per-model preferences": "使用选中的 VAE 覆盖每个大模型的 VAE 首选项",
|
||
"Select images from the left gallery.": "从左侧选择图片",
|
||
"Select joining char": "選擇接合字母",
|
||
"Select keyframes to be given to ebsynth.": "Ebsynth 提取关键帧。",
|
||
"Select Layer weights initialization. Recommended: Kaiming for relu-like, Xavier for sigmoid-like, Normal otherwise": "選擇層權重初始化方式。建議：relu-like 選 Kaiming，sigmoid-like 選 Xavier，其它選 Normal。",
|
||
"select-list": "选择列表",
|
||
"Select model": "选择模型",
|
||
"Select or Create a Model.": "选择或创建一个模型。",
|
||
"Select or create a model to begin.": "選擇或建立一個模型",
|
||
"Select preset": "选择预设",
|
||
"Select prompt": "選擇提示詞",
|
||
"selects the type of animation": "选择动画类型",
|
||
"Selects the type of Optical Flow to use if Optical Flow is selected in Hybrid motion.": "如果在混合运动模式中选择了光流法，则选择要使用的光流算法类型",
|
||
"Select template:": "选择模板:",
|
||
"Select the face to be swapped, you can sort by size or use the same gender as the desired face:": "选择要变换的面部，可按大小排序或使用相同性别的作为所需面部:",
|
||
"select the frame interpolation engine. hover on the options for more info": "选择帧插值引擎。悬停鼠标指针在选项上查看更多信息",
|
||
"Select this if you want to use the same seed for every generated image.\nThis is useful if you want to test prompt variations while using the same seed.\nIf there are no wildcards then all the images will be identical.": "勾選此選項以對每張產生的圖像用同樣的隨機種子。\n這在想用同樣的隨機種子測試提示詞變化時會有用。\n沒有萬用字元則所有圖像會相同。",
|
||
"Select Translater": "翻譯引擎：",
|
||
"Select visible tags": "选择可见标签",
|
||
"Select which DAT models to show in the web UI.": "选择要在 webui 中显示的 DAT 模型",
|
||
"Select which Real-ESRGAN models to show in the web UI.": "选择要在 webui 显示的 Real-ESRGAN 模型",
|
||
"Select which Real-ESRGAN models to show in the web UI. (Requires restart)": "选择在网页界面显示哪些 Real-ESRGAN 模型。(需重启)",
|
||
"Send blended image to img2img Inpainting tab": "将混合后的图片发送到局部重绘选项卡",
|
||
"Send dimensions to stable diffusion": "将当前图片尺寸信息发送到生成设置",
|
||
"Send first frame to img2img Inpainting tab": "将首帧发送到局部重绘选项卡",
|
||
"Send image and generation parameters to extras tab.": "发送图像和生成参数到后期处理选项卡",
|
||
"Send image and generation parameters to img2img inpaint tab.": "发送图像和生成参数到图生图局部重绘选项卡",
|
||
"Send image and generation parameters to img2img tab.": "发送图像和生成参数到图生图选项卡",
|
||
"Send image to tag selection": "发送到 标签 (Tag) 选择",
|
||
"Send interrupt": "发送中断指令",
|
||
"Send pose to /openpose_editor_index for edit.": "发送姿态图到 openpose editor 页面编辑",
|
||
"send priority": "发送优先级",
|
||
"Send prompt up": "发送提示词到上方",
|
||
"Send seed when sending prompt or image to other interface": "將提示詞或者圖像發送到 >> 其他界面時，把隨機種子也傳送過去",
|
||
"Send size when sending prompt or image to another interface": "發送提示或圖片到其他介面時，發送大小",
|
||
"Send this image to ControlNet.": ">> ControlNet",
|
||
"Send to": "發送至",
|
||
"Send to Blend": ">> 混合器",
|
||
"Send to Canvas Editor": "发送到 Canvas Editor",
|
||
"Send to ControlNet": ">> ControlNet",
|
||
"Send to Controlnet-img2img": "发送到 图生图 - ControlNet",
|
||
"Send to ControlNet (img2img)": "发送到 ControlNet (图生图)",
|
||
"Send to Controlnet-txt2img": "发送到 文生图 - ControlNet",
|
||
"Send to ControlNet (txt2img)": "发送到 ControlNet (文生图)",
|
||
"Send to Effect": ">> 效果器",
|
||
"Send to extras": ">> 附加功能",
|
||
"Send to Extras": "发送到 后期处理",
|
||
"Send to img2img": ">> 圖生圖",
|
||
"Send to img2img:": ">> 圖生圖\n（數字對應模型號碼）",
|
||
"Send to img2img ControlNet": "发送到 图生图 ControlNet",
|
||
"Send to inpaint": ">> 局部重繪",
|
||
"Send to inpaint upload": ">> 局部重繪",
|
||
"Send to ip2p": "发送到 图生图 pix2pix",
|
||
"Send to Layer1": ">> 圖層 1",
|
||
"Send to Layer2": ">> 圖層 2",
|
||
"Send to Layer3": ">> 圖層 3",
|
||
"Send to Layer4": ">> 圖層 4",
|
||
"Send to Layer5": ">> 圖層 5",
|
||
"Send to Multi-Merge": "发送到 多重合并",
|
||
"Send to openOutpaint": ">> openOutpaint",
|
||
"Send to QR Compare": "发送到 二维码对比器",
|
||
"Send to QR Scanner": "发送到 二维码扫描器",
|
||
"Send to txt2img": ">> 文生圖",
|
||
"Send to txt2img:": ">> 文生圖\n（數字對應模型號碼）",
|
||
"Send to txt2img and img2img": "发送到 文生图和图生图",
|
||
"Send to txt2img ControlNet": "发送到 文生图 ControlNet",
|
||
"Send training samples to a Discord channel after generation.": "把生成的训练样本图像发送到 Discord 频道。",
|
||
"(separate by comma)": "(用逗号分隔)",
|
||
"Separate prompts into parts using vertical pipe character (|) and the script will create a picture for every combination of them (except for the first part, which will be present in all combinations)": "用竖线分隔符(|)将提示词分成若干部分，脚本将为它们每个可能的组合创建一个图像（始终保留提示的第一部分，使用相同的种子）",
|
||
"Separate UNet/Text Encoder weights": "單獨設定 UNet 及文字編碼器的權重",
|
||
"Separate values for X axis using commas.": "使用逗號分隔 X 軸的值",
|
||
"Separate values for Y axis using commas.": "使用逗號分隔 Y 軸的值",
|
||
"sequential apply": "按顺序应用",
|
||
"Sequential Merge Parameters": "合并参数序列",
|
||
"Sequential XY Merge and Generation": "顺序合并并生成 XY 图",
|
||
"Server start time": "服务器启动时间",
|
||
"🖼 Set": "🖼 设置",
|
||
"Set": "设置",
|
||
"Set a variable like so:": "像这样设置变量：",
|
||
"Set Gradients to None When Zeroing": "將梯度設定為 0 的時候設定為無",
|
||
"Set \"Hires steps\" to [0], if you need": "设置 \"高分迭代步数\" 为 [0], 如果你需要",
|
||
"Set Init tab's strength slider greater than 0. Recommended value (.65 - .80).": "将Init选项卡的强度滑块设置为大于0。建议值（.65-.80）。",
|
||
"Set new defaults": "设置新默认值",
|
||
"Set Random Pose": "设置随机姿势",
|
||
"Set ranking to": "设置评分为",
|
||
"sets a midpoint at which a depth-map is to be drawn: range [-1 to +1]": "设置绘制深度图的中点: 范围 [ -1 到 +1 ]",
|
||
"set samplers": "设置采样方法",
|
||
"Set 'seed_behavior' to 'schedule' under the Seed Scheduling section below.": "在下面的“种子调度”部分下，将 “seed_behavior” 设置为 “schedule” 。",
|
||
"Set seed to -1, which will cause a new random number to be used every time": "將隨機種子設定為 -1，則每次都會使用一個新的隨機數",
|
||
"Set the Latent Couple extension to 2 area’s (standard setting)": "设置 Latent Couple 插件为 2 分区域 (标准设置)",
|
||
"Set the preprocessor to [invert] If your image has white background and black lines.": "如果您的線稿圖像是白色背景和黑色線條，請將預處理器設置為 [invert]。",
|
||
"Set the prompt compounder to: 2": "设置提示词混合为: 2",
|
||
"Set the Prompt Seperator mode to: automatic": "设置提示词分隔模式为: 自动",
|
||
"Set the Prompt Seperator mode to: prefix AND prompt + suffix": "设置提示词分隔模式为: prefix AND prompt + suffix （前缀 AND 提示词 + 后缀）",
|
||
"Set the Prompt seperator to: AND": "设置提示词分隔符为: AND",
|
||
"Set the strength to 0 automatically when no init image is used": "当无初始化图像在再被使用时，强度值将自动设置为 0",
|
||
" Setting": "设置",
|
||
"(setting entries that also appear in img2img interfaces)": "(同样会出现在 “图生图” 界面的设置选项)",
|
||
"(setting entries that also appear in txt2img/img2img interfaces)": "(配置同时出现在 文生图 / 图生图 界面的选项条目)",
|
||
"(setting entries that also appear in txt2img interfaces)": "(同样会出现在 “文生图” 界面的设置选项)",
|
||
"(setting entries that appear at the top of page rather than in settings tab)": "(添加位于网页界面顶部的选项, 而不是在设置选项卡中)",
|
||
"Setting files": "设置文件",
|
||
"settings": "设置",
|
||
"Settings": "設定",
|
||
"Settings->ControlNet->Allow other script to control this extension": "设置->ControlNet->允许其他脚本控制此扩展",
|
||
"Settings File": "设置文件",
|
||
"settings file path can be relative to webui folder OR full - absolute": "设置文件路径可以相对于 SD-WebUI 根目录，也可以是完整的绝对路径",
|
||
"Settings file Path can be relative to webui folder OR full - absolute": "设置文件路径可以相对于 SD-WebUI 根目录，也可以是完整的绝对路径",
|
||
"settings for": "设置。包括: ",
|
||
"Settings for img2img": "图生图设置项",
|
||
"Settings for txt2img": "文生图设置项",
|
||
"Settings in img2img hidden under Accordion": "图生图中的设置隐入手风琴容器",
|
||
"Settings->Interrogate Option->Interrogate: include ranks of model tags matches in results": "设置->反推设置->反推结果包含模型标签匹配等级",
|
||
"Settings in txt2img hidden under Accordion": "文生图中的设置隐入手风琴容器",
|
||
"Settings in UI": "UI 便捷设置",
|
||
"Settings stack. If it's not checked, it wont overwrite. Apply one, then another. Reset is old, update how you need.": "设置堆栈。如果未选中，则不会覆盖。应用一个，再应用另一个。重置已过时，请根据需要进行更新。",
|
||
"Set to 0 to disable": "設定為0以禁用",
|
||
"set to default": "设为默认",
|
||
"Set Up": "创建",
|
||
"setup codeformer": "设置 CodeFormer",
|
||
"setup gfpgan": "设置 GFPGAN",
|
||
"setup paths": "设置路径",
|
||
"setup SD model": "设置 SD 模型",
|
||
"Set your total number of keyframes to be 21 more than the last inserted keyframe image.": "将关键帧总数设置得比最后插入的关键帧图像大 21",
|
||
"SFW mode 👀 (blur all images)": "健全模式 👀 (模糊所有图像)",
|
||
"SGM noise multiplier": "使用 SGM 噪声倍率",
|
||
"SHA256 hash of the current checkpoint": "当前模型的 SHA256 哈希值",
|
||
"Shapes": "形状",
|
||
"Shared memory": "共享内存",
|
||
"sharpen face": "锐化面部",
|
||
"Sharpness": "锐度",
|
||
"Sharpness:": "锐化度",
|
||
"Shifts when preservation of original content occurs during denoising.": "降噪过程中, 原始画面保留比例随采样迭代步数变化的调度函数偏离量。",
|
||
"should be 2 or lower.": "必須小於等於 2",
|
||
"Shoulder To Hip": "肩臀距离",
|
||
"Shoulder Width": "肩宽",
|
||
"Show Additional Generation Info": "显示附加生成信息",
|
||
"Show all pages": "顯示所有頁面",
|
||
"Show all results": "顯示所有結果",
|
||
"Show API Key": "显示 API Key",
|
||
"Show a progress bar in the console for tiled upscaling.": "在控制台中添加用于显示分块放大图像进度的进度条",
|
||
"Show Aria2 logs in CMD": "在 CMD 中显示 Aria2 日志",
|
||
"Show Aria2 Logs in CMD": "在 CMD (控制台) 显示 Aria2 日志",
|
||
"Show Aria2 logs in console": "在控制台显示 Aria2 日志",
|
||
"Show batch images in gradio gallerie output": "在 Gradio Gallerie 输出中批量显示图像",
|
||
"Show batch images in gradio gallery output": "在 Gradio 图像输出框中批量显示图像",
|
||
"Show Button On Thumb Mode": "在缩略图模式下显示按钮",
|
||
"Show Button On Thumb Mode in SD webui versions before 1.5.0": "在 SD webui 1.5.0 前的版本的拇指模型视图下显示按钮",
|
||
"Show cards for models in hidden directories": "显示隐藏目录中的模型卡片",
|
||
"Show Civitai Link events in the console": "在控制台输出 Civitai Link 事件",
|
||
"Show command for conversion": "显示转换命令行",
|
||
"Show console debug": "在控制台显示调试信息",
|
||
"Show console logs during update scanning": "在更新扫描过程中显示控制台日志",
|
||
"Show debug message": "显示调试信息",
|
||
"Show DepthMap": "顯示深度圖",
|
||
"Show description of how to edit tags": "显示如何编辑标签",
|
||
"Show description on card": "在卡片上显示描述信息",
|
||
"Show dirs": "顯示目錄",
|
||
"Show extra networks": "显示扩展模型面板",
|
||
"Show extra options": "显示额外选项",
|
||
"Show generation progress in window title.": "在視窗標題中顯示生成進度",
|
||
"Show gradio deprecation warnings in console.": "在控制台中显示 Gradio 的弃用警告",
|
||
"Show grid in gallery": "在画廊中显示网格图",
|
||
"Show grid in results for web": "在網頁的結果中顯示宮格圖",
|
||
"Show HeatMap": "顯示熱度圖",
|
||
"Show hidden directories": "显示隐藏目录",
|
||
"Show/hide extra networks": "顯示 / 隱藏額外的網路",
|
||
"Show/Hide Generation Info": "显示/隐藏生成信息",
|
||
"Show Images": "显示图像",
|
||
"Show images zoomed in by default in full page image viewer": "在整頁圖像檢視器中，預設放大顯示圖像",
|
||
"Show intermediate steps": "显示中间步骤",
|
||
"Show internal metadata": "显示内部元数据",
|
||
"Show Live preview in full page image viewer": "允许实时预览在网页全屏图像查看器打开时显示",
|
||
"Show live previews of the created image": "顯示所創建的圖像的實時預覽",
|
||
"Show live tag translation below prompt": "在提示词下方显示实时标签翻译",
|
||
"Show live tag translation below prompt (WIP, expect some bugs)": "在提示词下方显示实时标签翻译 (未完成，预计会有一些bug)",
|
||
"Show maximum dimension button": "显示最大尺寸按钮",
|
||
"Show minimum dimension button": "显示最小尺寸按钮",
|
||
"Show more info": "显示更多信息",
|
||
"Show '?' next to tags, linking to its Danbooru or e621 wiki page": "在标签 旁显示 '?' , 链接到其 Danbooru 或 e621 的 Wiki 页面",
|
||
"Show '?' next to tags, linking to its Danbooru or e621 wiki page (Warning: This is an external site and very likely contains NSFW examples!)": "在標記旁顯示「？」，連結到其 Danbooru 或 e621 wiki 頁面（警告：這是外部網站，很可能包含 NSFW 內容！）",
|
||
"Show only one page": "仅显示一页",
|
||
"Show only the tags selected in the Positive Filter": "只展示在 Positive 过滤器中的被选中标签",
|
||
"Show original image": "显示原始图像",
|
||
"Show pre-defined aspect ratio buttons": "显示纵横比预设按钮",
|
||
"Show pre-defined percentage buttons": "显示百分比预设按钮",
|
||
"Show Preview": "显示预览",
|
||
"Show previews of all images generated in a batch as a grid": "以宮格圖的形式，預覽批量產生的所有圖像",
|
||
"Show preview thumbnails for extra networks if available": "显示扩展模型预览缩略图 (如可用)",
|
||
"Show progressbar": "顯示進度列",
|
||
"Show progress indicator": "显示进度指示器",
|
||
"Show result images": "顯示輸出圖像",
|
||
"(Shows the \"is currently outdated\" messages in the console when scanning models for available updates\")": "(扫描模型可用更新时在控制台中显示 \"当前已过时\" 信息)",
|
||
"Show the Extra Networks directory view by default": "默认显示扩展模型目录视图",
|
||
"Show the first N batch img2img results in UI": "在 UI 中显示前 N 批的图生图结果",
|
||
"Show verbose debug info at console": "在控制台中输出详尽的调试信息",
|
||
"Show warnings in console.": "在控制台顯示警告訊息。",
|
||
"Show Width/Height and Batch sliders in same row": "在同一列中顯示寬度 / 高度和批量滑塊",
|
||
"Shrink the brush size": "缩小画笔",
|
||
"shuffle": "shuffle (随机洗牌)",
|
||
"Shuffle": "Shuffle (随机洗牌)",
|
||
"Shuffleing tags by ',' when create texts.": "创建文本时打乱以 ',' 分割的标签",
|
||
"Shuffle Tags": "洗牌標籤",
|
||
"Shuffle tags by ',' when creating prompts.": "在建立提示時用 ',' 洗牌標籤",
|
||
"Shuffle wildcards before use for more random outputs": "使用前打乱通配符以获取更随机的结果",
|
||
"Shutdown server": "关闭服务器",
|
||
"Sidebar": "侧边栏",
|
||
"Sides": "每边张数",
|
||
"Sigma adjustment for finding noise for image": "為尋找圖中噪點的希格瑪（Sigma）調整",
|
||
"sigma churn": "希格瑪流失量（sigma churn）",
|
||
"sigma max": "最大 Sigma",
|
||
"sigma min": "最小 Sigma",
|
||
"sigma noise": "希格瑪噪點量（sigma noise）",
|
||
"Sigma noise": "希格瑪噪點量（Sigma noise）",
|
||
"Sigma Noise": "Sigma 噪声",
|
||
"Sigma schedule": "Sigma 调度计划",
|
||
"sigma tmax": "sigma tmax (最大时间步长)",
|
||
"sigma tmin": "希格瑪最小值（sigma tmin）",
|
||
"Silhouette": "Silhouette (剪影)",
|
||
"Similarity": "相似度",
|
||
"Simple": "单一值",
|
||
"Simple :": "简要地说: ",
|
||
"Simple (Auto-value)": "单一值（自动取值）",
|
||
"Since compilation happens only on the first run, the first inference (or warm up inference) will be slower than subsequent inferences.": "由于编译仅在第一次运行时进行, 所以第一次推理 (预热推理) 会比后续推理慢",
|
||
"Single": "单次处理",
|
||
"single image": "单张图片",
|
||
"Single image": "单张图像",
|
||
"Single Image": "單張圖像",
|
||
"Single process": "单次处理",
|
||
"Single text file with all prompts": "包含所有提示词的一个文本文件",
|
||
"Size": "尺寸",
|
||
"Size of the face when recreating": "重建脸部的尺寸",
|
||
"Size of the thumbnails (px)": "缩略图大小 (单位: 像素)",
|
||
"Size to generate": "生成规格",
|
||
"sketch": "素描",
|
||
"➠ Sketch": "➠ 涂鸦",
|
||
"Sketch": "素描",
|
||
"Sketch initial brush color": "涂鸦初始画笔颜色",
|
||
"Skip": "跳過",
|
||
"Skip generation and use (edited/custom) depthmaps in output directory when a file already exists.": "当文件已存在时，跳过生成并使用输出目录中的（已存在/自定义）的深度图。",
|
||
"Skip generation and use (edited/custom) depthmaps in output directory when a file exists.": "当文件已存在时, 跳过生成并在输出目录中使用 (编辑后/自定义) 的深度图",
|
||
"Skip img2img processing when using img2img initial image": "使用图生图初始图像时跳过图生图处理",
|
||
"(skip negative prompt for some steps when the image is almost ready; 0=disable, higher=faster)": "(当图像接近生成完成时, 跳过部分步数的负面提示词影响; 0=禁用, 数值越大=越快速)",
|
||
"Skip negative prompt for steps where image is already mostly denoised; the higher this value, the more skips there will be; provides increased performance in exchange for minor quality reduction.": "对图像已经完成大部分去噪的采样步数, 跳过反向提示词; 这个值越高, 跳过的步数就越多; 以轻微的质量降低换取更高的性能",
|
||
"Skip NSFW Preview Images": "下载预览图时跳过含成人内容的图像",
|
||
"SKip NSFW Preview images": "下载预览图时跳过含成人内容的图像",
|
||
"SKip NSFW Preview Images": "下载预览图时跳过含成人内容的图像",
|
||
"Skip/Reset CLIP position_ids": "跳过或重置 CLIP position_ids 键值",
|
||
"Skip video creation": "跳过视频生成",
|
||
"slow": "慢速",
|
||
"slower": "很慢",
|
||
"Slow Mo": "慢动作",
|
||
"Slow-Mo the interpolated video, audio will not be used if enabled": "慢动作插值视频, 启用后不使用音频",
|
||
"Smart subject": "智能主题",
|
||
"Smart subject tries to determine what to and not to generate based on your subject. Example, if your Overwrite subject is formed like this: Obese man wearing a kimono": "智能主题会尝试根据你的主题决定要生成什么和避免生成什么。\n比如说，如果你的覆盖主题是这样的格式：穿着和服的肥胖男子",
|
||
"Smoothing": "柔和度",
|
||
"Snapshot to Resume": "從 Snapshot 恢復",
|
||
"Socket port for image browser": "Cozy 图库浏览器的 Socket 端口",
|
||
"SoftEdge": "SoftEdge (软边缘)",
|
||
"softedge_hed": "softedge_hed (软边缘检测 - HED)",
|
||
"softedge_hedsafe": "softedge_hedsafe (软边缘检测 - 保守 HED 算法)",
|
||
"softedge_pidinet": "softedge_pidinet (软边缘检测 - PiDiNet 算法)",
|
||
"softedge_pidisafe": "softedge_pidisafe (软边缘检测 - 保守 PiDiNet 算法)",
|
||
"softedge_teed": "softedge_teed (软边缘检测 - 高效边缘检测)",
|
||
"Soft inpainting": "柔和重绘",
|
||
"Soft inpainting allows you to": "柔和局部重绘可以",
|
||
"soft_light": "柔光",
|
||
"So it's normal for the first inference after a settings change to be slower, while subsequent inferences use the optimized compiled model and run faster.": "所以设置更改后的第一次推理速度较慢是正常的, 后续推理会使用编译优化后的模型且速度更快",
|
||
"solution.": "的解决方法。",
|
||
"Some settings have been moved to the settings tab. Find them in the Dynamic Prompts section.": "一些选项已经被移动至设置中，在设置里的 Dynamic Prompt 选项下可以找到",
|
||
"Sort ascending": "升序",
|
||
"Sort bounding boxes by": "按以下方式对边界框进行排序",
|
||
"sort by": "排序方式",
|
||
"Sort by": "排序方式",
|
||
"Sort by:": "排序方式: ",
|
||
"Sort By:": "排序方式: ",
|
||
"Sort by alphabetical order": "按首字母顺序排序",
|
||
"Sort by date created": "按创建日期排序",
|
||
"Sort by date modified": "按修改日期排序",
|
||
"Sort by filename": "按文件名排序",
|
||
"Sort by path": "按路径排序",
|
||
"Sort by size (larger>smaller)": "按大小排序 (更大>更小)",
|
||
"Sort caption on save": "保存时对描述排序",
|
||
"Sort descending": "降序",
|
||
"Sorting": "排序",
|
||
"Sort LoRA models by": "LoRA 模型的排序方式",
|
||
"Sort Order": "排序方式",
|
||
"Sort tags": "排序标签",
|
||
"Sort tags in the images displayed.": "在已显示的图像中排序标签",
|
||
"Sort wildcard file contents alphabetically": "按字母顺序排列通配符文件内容",
|
||
"(so they are used as literal brackets and not for emphasis)": "(启用后作为字面意义上的括号使用, 不起强调作用)",
|
||
"Soundtrack path": "音轨路径",
|
||
"Source": "來源",
|
||
"Source Checkpoint": "源模型權重存檔點",
|
||
"Source Checkpoint:": "來源模型權重存檔點：",
|
||
"Source directory": "來源目錄",
|
||
"Source image": "原始图像",
|
||
"Source Images": "图像源",
|
||
"Source image URL": "源图像地址",
|
||
"Source Path": "來源路徑",
|
||
"Source URL where this model could be found": "模型的發布網址",
|
||
"space": "空間",
|
||
"Space": "Space (空间艺术)",
|
||
"SparseCtrl": "SparseCtrl (稀疏控制)",
|
||
"Specific branch name": "特定分支名",
|
||
"specify a custom settings file and ignore settings displayed in the interface": "指定自定义设置文件并忽略界面中显示的设置",
|
||
"Specify model revision": "指定模型版本",
|
||
"Specify model variant": "指定模型变种",
|
||
"Specify the amount that you wish to expand the mask by (recommend 0-10)": "设定蒙版扩展量（建议0-10）",
|
||
"Specify the amount that you wish to expand the mask by (recommend 30)": "设定蒙版扩展量（建议30）",
|
||
"specify your own seed schedule": "指定自己所需的种子调度计划",
|
||
"specify your own seed schedule (found on the Keyframes page)": "指定你自己的种子数表（可在关键帧选项卡中找到）",
|
||
"Speech": "语音",
|
||
"split": "分离",
|
||
"Split based on cuts (as well)": "基于分割进行提取（同时）",
|
||
"Split image overlap ratio": "分割圖像重疊的比率",
|
||
"Split image threshold": "圖像分割閾值",
|
||
"Split mode": "分割模式",
|
||
"Split over-sized images": "分割过大的图像",
|
||
"Split oversized images": "分割過大的圖像",
|
||
"Split oversized images into two": "将过大的图像分为两份",
|
||
"Split sides again after inpainting?": "重绘后分边?",
|
||
"Splits model loss during training into Instance Loss and Prior Loss. Requires class images to be enabled.": "将训练过程中的模型损失分为 \"实例损失\" 和 \"先验损失\" 。需要启用类别图像。",
|
||
"Split Video": "分割视频",
|
||
"square": "square (方图)",
|
||
"SR Model": "SR 模型",
|
||
"SSAA": "超级采样抗锯齿",
|
||
"Stability API Settings": "Stability API 设置",
|
||
"stability_score_offset": "稳定性得分偏移",
|
||
"stability_score_thresh": "稳定性得分阈值",
|
||
"stability_score_threshold": "稳定性得分阈值",
|
||
"Stable Diffusion": "SD",
|
||
"Stable Diffusion backend": "Stable Diffusion 后端",
|
||
"Stable Diffusion checkpoint": "Stable Diffusion 模型權重存檔點",
|
||
"Stable Diffusion checkpoint autoload on server start": "在服务器启动时自动加载 Stable Diffusion 模型",
|
||
"Stable Diffusion checkpoint: refresh": "SD 模型: 刷新",
|
||
"Stable Diffusion version": "Stable Diffusion 版本",
|
||
"Stable Diffusion XL": "SDXL",
|
||
"Stable Horde API Key": "Stable Horde API 密钥",
|
||
"Stable Horde Endpoint": "Stable Horde 服务器地址",
|
||
"Stable Horde Interrogation": "Stable Horde 反推",
|
||
"Stable Horde Settings": "Stable Horde 设置",
|
||
"Stable Horde Worker": "Stable Horde 工作端",
|
||
"Stackable": "可堆叠",
|
||
"Stackable checkbox is not used for saves, it's used when making a selection from the dropdown, whether to apply as stackable or not": "可堆叠复选框不用于保存，它用于从下拉列表中进行选择，无论是否应用为可堆叠",
|
||
"Stacked Papercut": "Stacked Papercut (叠式剪纸)",
|
||
"stage 1": "步骤 1",
|
||
"stage1": "步骤 1",
|
||
"Stage 1": "第一阶段",
|
||
"stage 2": "步骤 2",
|
||
"stage2": "步骤 2",
|
||
"Stage 2": "第二阶段",
|
||
"stage 3": "步骤 3",
|
||
"(Stage 3, 4, and 6 only show a guide and do nothing actual processing.)": "（步骤 3、4和6只显示指南，不做实际的操作。）",
|
||
"stage 3.5": "步骤 3.5",
|
||
"stage 4": "步骤 4",
|
||
"stage 5": "步骤 5",
|
||
"stage 6": "步骤 6",
|
||
"stage 7": "步骤 7",
|
||
"stage 8": "步骤 8",
|
||
"stained glass": "stained glass (彩色玻璃)",
|
||
"Stained Glass": "Stained Glass (染色玻璃)",
|
||
"stars": "按 Star 数量",
|
||
"Start At Step": "开始作用时机",
|
||
"Start Auto Translate": "開始自動翻譯",
|
||
"Start batch process": "开始批量处理",
|
||
"Start Cropping": "開始裁剪",
|
||
"Start drawing": "开始绘制",
|
||
"start extracting the input video only from this frame number": "指定输入视频某帧开始提取",
|
||
"Start generating and upscaling!": "开始生成并放大",
|
||
"Starting Control Step": "開始控制步數(%)",
|
||
"Starting Control Step schedule": "引导介入时机调度计划",
|
||
"Starting seed for the animation. -1 for random": "动画起始随机数种子。设置 -1 为随机",
|
||
"Start of prompt": "提示词前",
|
||
"Start parsing settings...": "开始解析设置...",
|
||
"Start steps": "开始步数",
|
||
"Start training.": "开始训练",
|
||
"Startup profile": "启动计时",
|
||
"Start WebUi with option --api for this to work.": "启动 WebUi 时加入 --api 启动参数来保证本标签页的功能正常工作。",
|
||
"State": "运行状态",
|
||
"State to restore": "待恢复部分",
|
||
"Static engines support a single specific output resolution and batch size.": "静态 (Static) 引擎支持单个特定的输出分辨率和单批数量。",
|
||
"status": "状态",
|
||
"Status": "状态",
|
||
"Status:": "状态: ",
|
||
"Std": "标准差",
|
||
"Steal 'em quick, by using": "更快的提取方式。通过使用 ",
|
||
"Steampunk": "Steampunk (蒸汽朋克)",
|
||
"step": "迭代步数",
|
||
"Step": "迭代步数",
|
||
"Step Ratio of Text Encoder Training": "文字編碼器訓練步驟比率",
|
||
"Steps": "疊代步數",
|
||
"Steps schedule": "迭代步数调度计划",
|
||
"Sticker": "贴纸",
|
||
"still life": "still life (静物画)",
|
||
"Still Mode (fewer hand motion, works with preprocess `full`)": "静止模式 (更少的手部运动, 需要和 `完整` 预处理一起工作)",
|
||
"Still Mode (fewer head motion, works with preprocess `full`)": "静止模式 (更少的头部运动, 需要和 `完整` 预处理一起工作)",
|
||
"*Stitch frames to video*": "*将帧缝合为视频*",
|
||
"Stop": "停止",
|
||
"Stop At Step": "终止作用时机",
|
||
"Stop generation of current batch and continues onto next batch": "中止当前批次的生成并继续生成下一个批次",
|
||
"Stop processing current image and continue processing.": "停止處理當前圖像，並繼續處理下一個",
|
||
"Stop processing images and return any results accumulated so far.": "停止處理圖像，並返回迄今為止累積的任何結果",
|
||
"stop the extraction of the video at this frame number. -1 for no limits": "指定输入视频某帧结束提取，-1 表示无限制（全部）",
|
||
"Stop XY": "停止生成 X/Y 图",
|
||
"Store frames in ram": "将帧保存到内存",
|
||
"Store images in database": "在数据库中存储图像",
|
||
"Store preferences and SVG content locally": "在本地保存设置和SVG图像",
|
||
"storybook realism": "storybook realism (故事书写实主义/迪士尼艺术)",
|
||
"straight-line": "直线",
|
||
"Strategy Game": "Strategy Game (策略游戏)",
|
||
"street art": "street art (街头艺术)",
|
||
"Street Fighter": "Street Fighter (街头霸王)",
|
||
"streetscape": "streetscape (街景)",
|
||
"strength": "强度",
|
||
"Strength": "强度",
|
||
"Strength 0 no init": "强度为 0 时停用初始化",
|
||
"Strength of negative feedback relative to positive feedback.": "相对于正向反馈的反向反馈权重强度",
|
||
"Strength schedule": "强度调度计划",
|
||
"Strict Tokens": "嚴格的標記",
|
||
"Stride": "步幅",
|
||
"String to use as left bracket for parser variants, .e.g {variant1|variant2|variant3}": "作為解析器變體左括號的字符串，例如 {variant1|variant2|variant3}",
|
||
"String to use as right bracket for parser variants, .e.g {variant1|variant2|variant3}": "作為解析器變體右括號的字符串，例如 {variant1|variant2|variant3}",
|
||
"String to use as wrap for parser wildcard, .e.g __wildcard__": "用作解析萬用字元的字串命令，例如 __wildcard__",
|
||
"Style": "样式",
|
||
"Style 1": "模版风格 1",
|
||
"Style 2": "模版风格 2",
|
||
"[StyleAlign] Align image style in the batch.": "[风格对齐] 在批次中对齐图像风格",
|
||
"Style Fidelity (only for \"Balanced\" mode)": "风格仿真度 (仅用于 \"平衡\" 模式)",
|
||
"Style Name": "样式名称",
|
||
"Styles": "樣式",
|
||
"Styles allow you to add custom text to prompt. Use the {prompt} token in style text, and it will be replaced with user's prompt when applying style. Otherwise, style's text will be added to the end of the prompt.": "预设样式允许自行添加自定义文本到提示词中。\n在预设样式文本中使用 {prompt} 词元，在应用预设样式时，它将被用户的提示词所替代。\n不然的话，预设样式文本会被添加到提示词末尾。",
|
||
"Style Selector": "样式选择器",
|
||
"Styles: refresh": "预设样式: 刷新",
|
||
"Subdirectory": "子目录",
|
||
"Sub directory depth": "子目錄深度",
|
||
"Subdirectory (even temp dir)": "子目录 (包括临时目录)",
|
||
"Sub folder:": "子文件夹: ",
|
||
"Sub-folder": "子文件夹",
|
||
"Sub Folder:": "子文件夹: ",
|
||
"Subject": "主题",
|
||
"Subject Types": "主题类型",
|
||
"Submit": "提交",
|
||
"Submit results": "提交结果",
|
||
"SubSeed": "第二种子",
|
||
"Subseed schedule": "第二种子调度计划",
|
||
"Subseed strength schedule": "第二种子强度调度计划",
|
||
"subtract": "减去",
|
||
"Suffix": "后缀名",
|
||
"Suggested weight": "建议权重",
|
||
"Sum": "和",
|
||
"sum Twice:(A*(1-alpha)+B*alpha)*(1-beta)+C*beta": "两次求和: (A*(1-α)+B*α)*(1-β)+C*β",
|
||
"superfast": "超级快",
|
||
"Super Mario": "Super Mario (超级马里奥)",
|
||
"SuperMerger": "超級融合器",
|
||
"Supported engines:": "支持的引擎：",
|
||
"Supports boolean operations: (! - negation, & - and, | - or, ^ - xor, - difference, () - nested operations)": "支持布尔运算：（！-否定/取反，&-与，|-或，^-异或，\\-差分，()-嵌套操作）",
|
||
"surrealism": null,
|
||
"Surrealist": "Surrealist (超现实主义-哲学)",
|
||
"Swap axes": "互换坐标轴",
|
||
"Swap hotkey combinations for Zoom and Adjust brush resize": "交换缩放和调整画笔大小的热键组合",
|
||
"swap XY": "互换 XY 轴",
|
||
"Swap X/Y axes": "交換 X/Y 軸",
|
||
"Swap X/Z axes": "交換 X/Z 軸",
|
||
"Swap Y/Z axes": "交換 Y/Z 軸",
|
||
"Swipe left/right navigates to the next image": "左右滑动时导航到下一张图片",
|
||
"Switch at": "切換於",
|
||
"Switch prompt between Native language and English": "切换提示词显示语言 (母语/英语)",
|
||
"(switch to another model in the middle of generation)": "(在生成中途切换的另一个模型)",
|
||
"switch to another model in the middle of generation": "在生成中途切换的另一个模型",
|
||
"Switch to Inpaint Upload": "发送到 重绘蒙版",
|
||
"Switch to refiner by sampling steps instead of model timesteps. Old behavior for refiner.": "根据采样迭代步数 (而不是模型时间步数) 来判断切换到 Refiner 的时机, 此为 Refiner 旧版行为",
|
||
"symbolism": "symbolism (象征主义)",
|
||
"Synchronize with main seed": "与主随机数种子同步",
|
||
"Sync with Default SD checkpoint": "与默认 SD 模型同步",
|
||
"Syntax cheatsheet": "語法速查表",
|
||
"Sysinfo": "系统信息",
|
||
"system": "系统",
|
||
"System": "系統",
|
||
"System data": "系统信息",
|
||
"System Info": "系統資訊",
|
||
"System: peak amout of video memory allocated by all running programs, out of total capacity": "系统：所有运行程序分配的显存峰值，占总容量的百分比",
|
||
"T2IA": "T2IA (自适应)",
|
||
"t2ia_color_grid": "t2ia_color_grid (文本到图像自适应控制 - 色彩像素化)",
|
||
"t2ia_sketch_pidi": "t2ia_sketch_pidi (文本到图像自适应控制 - 草绘边缘像素差分)",
|
||
"t2ia_style_clipvision": "t2ia_style_clipvision (文本到图像自适应控制 - 风格迁移)",
|
||
"tab": "頁籤",
|
||
"Tab": "Tab (制表符)",
|
||
"Tag": "标签",
|
||
"Tag Autocomplete": "標記自動補齊",
|
||
"Tag confidences": "标签置信度",
|
||
"Tag confidents": "标签置信度",
|
||
"Tag filename": "標記檔檔名",
|
||
"Tag file output format. Leave blank to use same filename or e.g. \"[name].[hash:sha1].[output_extension]\". Also allowed are [extension] or any other [hash:<algorithm>] supported by hashlib": "标签文件输出格式。留空以使用相同文件名或以下示例。“[name].[hash:sha1].[output_extension]”。同时允许使用 [extension] 或 hashlib 支持的任何其他 [hash:<algorithm>] 算法。",
|
||
"Tagger": "WD 1.4 标签器",
|
||
"Tagging": "打标",
|
||
"Tagging Confidence Threshold": "标签置信度阈值",
|
||
"Tag images": "多图打标",
|
||
"Tag one image": "单图打标",
|
||
"Tags": "標記",
|
||
"tags from the images displayed.": "显示图像的标签",
|
||
"(Takes longer on first run)": "(第一次运行时需要更长时间)",
|
||
"(takes precedence over the regular space setting for that position)": "(优先于在该位置的其他常规空间设置)",
|
||
"Take the focus off the prompt when working with a canvas": "使用画布时, 将焦点从提示词上移开",
|
||
"Target": "目標",
|
||
"Target ControlNet models": "目标 ControlNet 模型",
|
||
"Target dataset num: ": "目标数据集数量：",
|
||
"Target face : Comma separated face number(s)": "目标面部: 使用逗号分隔面部序号",
|
||
"Target Folder": "目标文件夹",
|
||
"Target language": "目标语言",
|
||
"Target Language": "目标语言",
|
||
"Target tokens (comma separated)": "分隔目标提示词(逗号分隔)",
|
||
"Task History": "任务历史",
|
||
"Task Id": "任务 ID",
|
||
"Task Queue": "任务队列",
|
||
"Tattoo": "纹身",
|
||
"(Technical button, needed for testing)": "(技术性按钮, 用于测试)",
|
||
"(Technical button, neededs for testing)": "(技术性按钮, 用于测试)",
|
||
"Techwear Fashion": "Techwear Fashion (科技时尚-服装)",
|
||
"temparature": "色温",
|
||
"temperature": "色温",
|
||
"template": "模板",
|
||
"Templates": "模板",
|
||
"Temporal-Warp": "Temporal 修复",
|
||
"TENC Gradient Clip Norm": "裁剪文本编码器 (TENC/CLIP) 梯度归一层",
|
||
"TEnc Weight 1": "文字編碼器權重 1️⃣",
|
||
"TEnc Weight 2": "文字編碼器權重 2️⃣",
|
||
"TEnc Weight 3": "文字編碼器權重 3️⃣",
|
||
"TEnc Weight 4": "文字編碼器權重 4️⃣",
|
||
"TEnc Weight 5": "文字編碼器權重 5️⃣",
|
||
"TENC Weight Decay": "文本编码器 (TENC/CLIP) 权重衰减",
|
||
"TensorRT Exporter": "TensorRT 导出",
|
||
"TensorRT Extension": "TensorRT 扩展",
|
||
"TensorRT uses optimized engines for specific resolutions and batch sizes. You can generate as many optimized engines as desired. Types:": "TensorRT 对特定分辨率和批次数量使用优化引擎。可以根据需要生成任意数量的优化引擎。类型：",
|
||
"Tertiary model": "模型 C",
|
||
"Tertiary model (C)": "第三模型（C）",
|
||
"Tertiary model (C): refresh": "模型 C: 刷新",
|
||
"Testing": "測試",
|
||
"TEST-MAX-ALL": "全部测试",
|
||
"Test prompt": "測試提示詞",
|
||
"Textbox": "文字方塊",
|
||
"Text color for image grids": "网格图文本颜色",
|
||
"Text data view": "文本数据视图",
|
||
"Text Editor": "文本编辑器",
|
||
"text encoder": "文本编码器",
|
||
"Text Encoder Learning Rate": "文本编码器 (TE/CLIP) 学习率 (LR)",
|
||
"Text file for each image": "对应每个图像的文本文件",
|
||
"Text files directory (optional, will load from input dir if not specified)": "文本文件目录 (可选, 如不指定将从输入目录加载)",
|
||
"Text files directory (Optional, will load from input dir if not specified)": "文本文件目录 (可选, 如不指定将从输入目录加载)",
|
||
"textile": "textile (纺织艺术)",
|
||
"Text input": "文本輸入",
|
||
"Textual Inversion": "文本反轉（Textual Inversion）",
|
||
"TextualInversion": "Textual Inversion (嵌入式 T.I. Embedding)",
|
||
"Texture": "Texture (纹理)",
|
||
"The": "这个 ",
|
||
"The 1st and last keyframe images should match.": "第一个和最后一个关键帧图像应该匹配。",
|
||
"the 2D vanishing point of perspective (rec. range 30-160)": "2D 透视消失点 (rec. 范围: 30-160)",
|
||
"The algorithm is not able to enhance all images.": "本算法不能增强所有图像",
|
||
"The algorithm used to generate noise used in the diffusion process.": "扩散过程中用于产生噪声的算法。",
|
||
"The alpha schedule controls overall alpha for video mix, whether using a composite mask or not.": "半透明调度计划控制视频混合的整体透明度, 无论是否使用合成蒙版",
|
||
"The annotator directory inside the SAM extension directory is only a symbolic link. This is to save your space and make the extension repository clean.": "SAM 扩展目录中的解释器目录只是符号链接。这样能够节省你的硬盘空间，并使扩展库更加有序。",
|
||
"The Classifier-Free Guidance Scale to use for classifier/regularization images.": "用于分类/正则化图像的无分类器引导系数 (CFG Scale - 无分类器引导系数(Classifier-Free Guidance Scale))",
|
||
"The Classifier-Free Guidance Scale to use for preview images.": "用于生成预览图像的无分类器引导系数。",
|
||
"The code for this extension:": "此擴充功能的程式碼：",
|
||
"The current workflow is [text prompt]->[object detection]->[segmentation]. Semantic segmentation support is in Auto SAM panel.": "目前的工作流是 [文本提示词]->[对象检测]->[语义分割]。语义分割支持在自动 SAM 面板中。",
|
||
"The denoising curve controls the rate of denoising strength change each loop. Aggressive: Most of the change will happen towards the start of the loops. Linear: Change will be constant through all loops. Lazy: Most of the change will happen towards the end of the loops.": "降噪曲線控制每個迴圈中降噪強度的變化率。Aggressive（激進）：大部分的變化會發生在迴圈的開始。Linear（線性）：變化會在所有迴圈中保持恆定。Lazy（懶惰）：大部分的變化會發生在迴圈的結尾。",
|
||
"The denoising strength for the final loop of each image in the batch.": "每個批次中每張圖像的最後迴圈的重繪幅度。",
|
||
"The difference between the last two models will be added to the first. Requires three models; A, B and C. The result is calculated as A + (B - C) * M": "后两个模型的差值将叠加在主要模型上。需要输入 A、B、C 三个模型。计算公式为 A + (B - C) * M",
|
||
"The directory containing classification/regularization images.": "包含分类/正则化图像的目录",
|
||
"The directory containing training images.": "包含训练图像的目录",
|
||
"the directory in which your mask video is located.": "视频蒙版所在目录",
|
||
"the directory / URL at which your video file is located for Video Input mode only": "视频文件所在的目录/链接，仅适用于视频输入模式",
|
||
"The existing prompt and negative prompt fields are ignored.": "会使现有的正向提示词和反向提示词段被忽略。",
|
||
"The \"Export Default Engines\" selection adds support for resolutions between 512x512 and 768x768 for Stable Diffusion 1.5 and 768x768 to 1024x1024 for SDXL with batch sizes 1 to 4.": "“导出默认引擎” 选添加了对 Stable Diffusion 1.5 中 512x512 和 768x768 的分辨率支持，以及单批数量 1 - 4 的 SDXL 768x768 和 1024x1024 的分辨率支持。",
|
||
"The following will only affect reference face image (and is not affected by sort by size) :": "以下选项会仅影响参考的面部图像 (且不受影响大小排序影响)",
|
||
"The frames per second that the video will run at": "视频的每秒播放帧数",
|
||
"The Guided images mode exposes the following variables for the prompts and the schedules:": "图像引导模式为提示词和调度计划提供以下变量：",
|
||
"The height of the output images, in pixels (must be a multiple of 64)": "输出图像的高度（像素）（必须能整除于 64）",
|
||
"(The 'JumpTo...' keybinds (End & Home key by default) will select the first non-embedding result of their direction on the first press for quick navigation in longer lists.)": "('JumpTo...' 键位绑定 (一般默认是 End & Home 键) 会在第一次按下时选择其方向上第一个非嵌入式模型标签, 便于在较长的列表中快速导航)",
|
||
"The learning rate scheduler to use. All schedulers use the provided warmup time except for 'constant'. For dadapt_with_warmup it 10% total steps is recommended. You may need to add additional epochs to compensate.": "所用的学习率调度器。所有调度器使用默认的预热时间 (除 ‘constant’ 外) 。对于自带预热的 dadapt ，推荐设置为总步数的 10% 。可能需要增加额外的 Epoches 进行补偿。",
|
||
"the location of images to create the video from, when use_manual_settings is checked": "当 使用手动设置 选项选中时, 用于创建视频的图像位置",
|
||
"the maximum number of output images to be created": "所需要生成的最大输出图像数",
|
||
"The model to train.": "要训练的模型",
|
||
"The number of Perlin noise octaves, that is the count of P-noise iterations. Higher values will make the noise more soft and smoke-like, whereas lower values will make it look more organic and spotty. It is limited by 8 octaves as the resulting gain will run out of bounds.": "柏林噪声倍频程数，即柏林噪声迭代次数。数值越大，噪点越柔和，越像烟雾；数值越小，噪点越有机，越有斑点。最大限制为 8 倍频程，因为更高倍数产生的增益将超出范围。",
|
||
"The number of steps per image (Epoch) to train the text encoder for. Set 0.5 for 50% of the epochs": "每幅图像训练文本编码器 (TE/CLIP) 的步数。设置 0.5 相当于 50% 的 Epochs 。",
|
||
"The number of steps to use when generating classifier/regularization images.": "生成分类/正则化图像时使用的步数。",
|
||
"then use": "然后使用",
|
||
"The other site allows for making keyframes using": "另一個網站允許使用",
|
||
"the pan effect angle": "偏移效果角度",
|
||
"the path to a custom settings file": "自定义设置文件的路径",
|
||
"The path to a txt file to use for sample prompts. Use [filewords] or [name] to insert class token in sample prompts": "用于生成样本图像的 txt 文本文件路径。使用 [filewords] 或 [name] 以在样本图像提示词中插入类别词元",
|
||
"The path to the concepts JSON file, or a JSON string.": "储存概念的 JSON 文件的路径，或 JSON 字符串。",
|
||
"the path to your init image": "初始化图像的路径",
|
||
"the path to your mask image": "蒙版文件的路径",
|
||
"the path/ URL to an audio file to accompany the video": "视频附带的音频文件的路径 / 链接",
|
||
"The position in postprocess at which this script will be executed; 0 means it will be executed before any scripts, 99 means it will probably be executed last.": "本脚本在后处理进程中的执行时机; 0 意味着在所有脚本之前执行, 99 意味着可能在最后执行",
|
||
"The process of creating a video can be divided into the following stages.": "创作视频需要以下几个步骤。",
|
||
"The prompt to use to generate a sample image": "用于生成样本图像的正向提示词",
|
||
"The prompt to use when generating preview images.": "用于生成预览图像的提示词。",
|
||
"The rate at which the model learns. Default is 2e-6. For optimizers with D-Adaptation recommended learning rate is 1.0": "模型的学习速度。默认设置为 2e-6 。若使用 D-Adaptation 的优化器，推荐学习率设置为 1.0 。",
|
||
"There are a lot of special things build in, based on various research papers. Just try it, and let it surprise you.": "根据各种研究论文构建了许多特殊效果。尽管试一下，让它给你带来惊喜。",
|
||
"There are an immense number of image types, not only paintings and photo's, but also isometric renders and funko pops.\nYou can however, overwrite it with the most popular ones.": "大量的图像类型，不仅有画作和照片，还有 等距/等轴渲染 和 Funko Pops (玩具人偶) 。\n不过你可以用最流行的图像类型覆盖它。",
|
||
"There is *no* Batch mode like in vanilla deforum. Please Use the txt2img tab for that.": "本插件没有批处理模式，请使用文生图选项卡",
|
||
"the required timestamp to reference when resuming. Currently only available in 2D & 3D mode, the timestamp is saved as the settings .txt file name as well as images produced during your previous run. The format follows: yyyymmddhhmmss - a timestamp of when the run was started to diffuse.": "恢复时需要指定的时间戳。目前仅支持在 2D 和 3D模式中可用，该时间戳在中断之前的图像生成过程中所保存的 settings.txt 中。参数格式如下: yyyymmddhhmmss - 开始运行本插件时会自动生成一个时间戳",
|
||
"The resolution of input images. When using bucketing, this is the maximum size of image buckets.": "输入图像的分辨率。启用切分图像时，这也是图像切分的最大尺寸。",
|
||
"The results are stored in timestamp_prompts.txt.": "将结果保存在 timestamp_prompts.txt 中。",
|
||
"the roll effect angle": "所旋转的角度（X轴，一般性指水平）",
|
||
"The search term that determines the inpainting mask": "决定重绘蒙版的搜索条件",
|
||
"These can be used to add textual inversion and LoRA’s. They can also be used to add your models trigger words.": "这里用来添加 嵌入式(T.I. Embedding) 和 LoRA 。同样可以用来添加模型触发词。",
|
||
"The seed to use when generating samples. Set to -1 to use a random seed every time.": "生成样本时使用的随机数种子。设置为 -1 随机使用种子。",
|
||
"The seed to use when generating the validation sample image. -1 is not supported.": "生成验证样本图像时使用的种子。不能设置 -1。",
|
||
"the seed value will increment by 1 for each subsequent frame of the animation": "动画每完成一帧，种子值都将以 1 递增。",
|
||
"the seed will remain fixed across all frames of animation": "动画中所有帧的随机种子将被固定",
|
||
"the seed will remain fixed across all frames of animation. **NOT RECOMMENDED.** Unless you know what you are doing, it will *deep fry* the pictures over time": "种子将在动画的所有帧生成中保持不变。 **不推荐** 除非你确切知道自己在做什么, 随着时间的推移，图像会像 ”烧焦“ 一样。",
|
||
"The smaller this value, the narrower the keyframe spacing, and if set to 0, the keyframes will be equally spaced at the value of [Minimum keyframe gap].": "这个值越小，关键帧的间隔就越小，如果设置为0，关键帧的间隔将与[最小关键帧间隔]的值相同。",
|
||
"the tilt effect angle": "所翻转的垂直角度（Y轴）",
|
||
"The type of memory attention to use. 'Xformers' will provide better performance than flash_attention, but requires a separate installation.": "启用的内存注意力类型。\"Xformers\" 比 \"flash attention\" 性能更好，但需要单独安装。",
|
||
"The untranslated characters will be translated automatically and will not affect the old translations. Use the function in the lower right corner to easily check and quickly modify the current translation.1,Save the setting;2,Click start button;3,Reload your browser.": "未被翻譯的字句將會自動翻譯且不會影響原有的翻譯。使用右下角的功能來簡單的查看並快速編輯正確的翻譯：1. 儲存設定 2. 點選開始按鈕 3. 重新載入 UI",
|
||
"The URL to the model on huggingface. Should be in the format of 'developer/model_name'.": "Huggingface 模型的 URL。格式应为 'developer/model_name'。",
|
||
"The WebSocket is currently": "WebSocket 当前状态为",
|
||
"The weight decay for the Text Encoder. Values closer to 0 closely match your training dataset, and values closer to 1 generalize more and deviate from your training dataset. Default is 1e-2. For Dreambooth, recommended value is same as AdamW Weight Decay. For Lora recommended value is 0.01-0.02 higher than AdamW Weight Decay.": "文本编码器的权重衰减。越接近 0 的值越和训练数据集匹配，而越接近 1 的值则越泛化且偏离训练数据集。默认 1e-2。对于 Dreambooth 推荐设置的值和 AdamW 权重衰减相同。对于 Lora，推荐设置的值比 AdamW Weight Decay 高 0.01-0.02 。",
|
||
"the whole folder, generated before, not just the output folder": "提前建立好的整个工程目录，而不仅仅是输出文件夹",
|
||
"The width of the focus region in pixels": "对焦区域的宽度 (单位: 像素)",
|
||
"The width of the output images, in pixels (must be a multiple of 64)": "输出图像的宽度（像素，必须能整除于 64）",
|
||
"Thick Layered Papercut": "Thick Layered Papercut (厚层剪纸)",
|
||
"Thigh": "大腿长度",
|
||
"Third column (reference) image": "第三列 (参考) 图像",
|
||
"[this]": "[这里]",
|
||
"This extension works well with text captions in comma-separated style (such as the tags generated by DeepBooru interrogator).": "使用以逗号分隔的标签会让插件更好的工作。（比如由 DeepBooru 反推生成的标签）",
|
||
"This generator will generate a complete full prompt for you, based on randomness. You can increase the slider, to include more things to put into the prompt. \nRecommended is keeping it around 3-7. Use 10 at your own risk.": "本生成器会根据随机等级为你生成一段完整的提示词。可以通过滑块提高数值，以在提示词中包含更多的东西。\n建议保持在3-7左右。使用10的话后果自负。",
|
||
"This is an extra stage.": "这是一个额外的步骤。",
|
||
"This is a technique to reduce memory usage by clearing activations of certain layers and recomputing them during a backward pass. Effectively, this trades extra computation time for reduced memory usage.": "一种通过清除部分层的激活并在反向传播时重新计算来减少显存使用量的技术。实际是用额外的计算时间换取更少的显存使用量。",
|
||
"This is ignored if neither batch run or ebsynth are checked": "如果批量处理或 Ebsynth 模式都没有被选中，此项将被忽略",
|
||
"(this is optional. Perform color correction on the img2img results and expect flickering to decrease. Or, you can simply change the color tone from the generated result.)": "（此步骤可选。对图生图的结果进行颜色校正，可能会减少视频闪烁。或者，你也可以简单地在生成结果中调色。）",
|
||
"This is the total number of training steps that will be performed on each instance image.": "在每张图像上执行的训练步数总数。",
|
||
"This is your models list.": "这是您的模型列表。",
|
||
"this link": "这个链接",
|
||
"This mode works ONLY with 2D/3D animation modes. Interpolation and Video Input modes aren't supported.": "此模式仅适用于2D/3D动画模式。不支持帧插值和视频输入模式。",
|
||
"This option generates unique hashes for models that were not downloaded with this extension.\nA hash is required for any of the options below to work, a model with no hash will be skipped.\nInitial hash generation is a one-time process per file.": "此选项对其他未使用此扩展下载的模型生成唯一的哈希值；\n以下所有选项都需要哈希值才能工作，没有哈希值的模型将被跳过；\n初始哈希生成是每个文件的一次性过程。",
|
||
"this option renders N times before the final render. it is suggested to lower your steps if you up your redo. seed is randomized during redo generations and restored afterwards": "在最终渲染前进行 N 次渲染。如果增加重做次数，建议降低迭代步数。随机数种子在重做过程中被随机化，并在重做后被恢复。",
|
||
"this option takes twice as long because it generates twice in order to capture the optical flow from the previous image to the first generation, then warps the previous image and redoes the generation": "该选项需要两倍生成时间，因为它会生成两次图像，以捕获从上一幅图像到第一次生成的光流，接着变形上一幅图像并重新生成",
|
||
"This page allows you to add some settings to the main interface of txt2img and img2img tabs.": "本页面允许自定义添加部分设置到文生图和图生图选项卡中的主界面",
|
||
"This page allows you to change default values in UI elements on other tabs.": "本页面允许你去修改其他标签页中的 UI 默认设置",
|
||
"This panel is for those who want to upload mask to ControlNet inpainting. It is not part of the SAM feature. It might be removed someday when ControlNet support uploading image and mask. It serves as a temporarily workaround to overcome the unavailability of image with mask uploading feature in ControlNet extension.": "此面板是为想把蒙版上传到 ControlNet 重绘的人准备的。这不是 SAM 的功能。当某天 ControlNet 支持上传图像和蒙版时，此功能可能会删除。这是一个临时解决方案，以解决 ControlNet 不能上传蒙版的问题。",
|
||
"This preset affects?": "该预设中包含？",
|
||
"This regular expression will be used extract words from filename, and they will be joined using the option below into label text used for training. Leave empty to keep filename text as it is.": "此正則表達式將用於從檔案名中提取單詞，並將使用以下選項將它們接合到用於訓練的標記文本中。留空以保持檔案名文本不變",
|
||
", this required for some downloads, Requires UI reload)": ", 这用于部分模型的下载, 需要重载 UI)",
|
||
"This requires Controlnet 1.1 extension and the tile resample model, install this if you haven't\nIn settings for Controlnet, enable \"Allow other script to control this extension\"": "这需要 ControlNet 1.1 插件和 tile resample 预处理器对应的模型，如果没有请安装！\n在设置页面的 ControlNet 设置中启用 ”允许其他脚本控制此扩展“ 。",
|
||
"This requires the Ultimate SD Upscale extension, install this if you haven't": "这需要 Ultimate SD Upscale 插件，如果没有请安装！",
|
||
"This script is deprecated. Please use the full Deforum extension instead.": "此脚本已废弃。请改用完整的 Deforum 扩展。",
|
||
"This string will be used to join split words into a single line if the option above is enabled.": "如果啟用了上述選項，則此處的字元會用於將拆分的單詞接合為同一行",
|
||
"this subreddit": "此页面",
|
||
"This was originally a bug in the first release when using multiple batches, now brought back as a feature.\nRaised by redditor drone2222, to bring this back as a toggle, since it did create interesting results. So here it is.": "这原本是第一个版本中使用多批次时的一个 bug ，现在作为一个功能回归。\n由 redditor: drone2222提出，让它作为一个切换选项功能回归，因为它确实创造了有趣的结果。就是这样一个功能。",
|
||
"This way, you can create unlimited variants of a subject.": "通过这种方法，你可以创建同一个主题的无数变种图像。",
|
||
"This way, you don’t ever have to add it manually again. This file won’t be overwritten during upgrades.": "通过这个方法，就不需要每次都手动添加。这个文件不会在本插件更新时被覆盖。",
|
||
"This Will Override Selected Style": "启用会覆盖已选择的样式",
|
||
"This will produce one prompt for each colour in the wildcard.txt file.": "會為 colours.txt 中的每個顏色產生一條提示詞",
|
||
"This will produce the following prompts:": "會產生下列提示詞",
|
||
"This will produce three prompts, one for each color. The prompt tag is used to mark the text that will be used as the prompt. If no prompt tag is present then only one prompt is assumed": "會產生三條提示詞，每個顏色各一條；\n 提示詞標籤用於標記作為提示詞的文字；\n 如果沒有提示詞標籤則默認為僅一條提示詞",
|
||
"This will randomly choose one of the three colors.": "會隨機從三種顏色中選一個",
|
||
"Those settings are heavy on DOM modification and might conflict with some others extensions": "这些设置对 DOM 修改程度很大, 可能与其他扩展冲突",
|
||
"threshold": "閾值",
|
||
"Threshold": "阈值",
|
||
"Threshold A": "閾值 A",
|
||
"Threshold B": "閾值 B",
|
||
"Thresholding Mode": "阈值模式",
|
||
"Threshold of delta frame edge": "关键帧间隔差异阈值",
|
||
"Threshold schedule": "阈值调度计划",
|
||
"Threshold (Use only when basis is absolute)": "阈值 (仅在基准设为绝对时可用)",
|
||
"Threshold Value Lower": "阈值下限",
|
||
"Threshold Value Upper": "阈值上限",
|
||
"thumbs": "缩略视图",
|
||
"tile": "分块",
|
||
"Tile": "Tile (分块)",
|
||
"Tile/Blur": "Tile/Blur (分块/模糊)",
|
||
"tile_colorfix": "tile_colorfix (分块 - 固定颜色)",
|
||
"tile_colorfix+sharp": "tile_colorfix+sharp (分块 - 固定颜色 + 锐化)",
|
||
"Tile count:": "卡片显示数量: ",
|
||
"tile division BG Removers": "分块化背景去除",
|
||
"tile_gaussian": "Tile_Gaussian (分块 - 高斯模糊处理)",
|
||
"tile height": "分块高度",
|
||
"Tile height": "圖塊高度",
|
||
"Tile overlap": "圖塊重疊的畫素",
|
||
"Tile overlap for DAT upscalers.": "DAT 超分辨率的分块重叠像素大小",
|
||
"Tile overlap for ESRGAN upscalers.": "ESRGAN 超分辨率的分块重叠像素大小",
|
||
"Tile overlap for SCUNET upscalers.": "SCUNET 超分辨率的分块重叠像素大小",
|
||
"Tile overlap, in pixels for ESRGAN upscalers. Low values = visible seam.": "ESRGAN 超分辨率的分块重叠像素大小。数值越低意味着分块间的接缝越明显",
|
||
"Tile overlap, in pixels for SCUNET upscalers. Low values = visible seam.": "SCUNET 超分辨率的分块重叠像素大小。数值越低意味着分块间的接缝越明显",
|
||
"Tile overlap, in pixels for SwinIR. Low values = visible seam.": "SwinIR 的圖塊重疊畫素。較小時可見接縫",
|
||
"tile_resample": "tile_resample (分块 - 重采样)",
|
||
"Tile size:": "卡片大小: ",
|
||
"Tile size for all SwinIR.": "適用所有 SwinIR 系演算法的圖塊尺寸",
|
||
"Tile size for DAT upscalers.": "DAT 超分辨率使用的分块尺寸",
|
||
"Tile size for ESRGAN upscalers.": "ESRGAN 超分辨率使用的分块尺寸",
|
||
"Tile size for ESRGAN upscalers. 0 = no tiling.": "ESRGAN 使用的分块尺寸 。数值设为0意味着不分块",
|
||
"Tile size for SCUNET upscalers.": "SCUNET 超分辨率的分块尺寸",
|
||
"Tile size for SCUNET upscalers. 0 = no tiling.": "SCUNET 超分辨率的分块尺寸。数值设为0意味着不分块",
|
||
"tile width": "分块宽度",
|
||
"Tile width": "圖塊寬度",
|
||
"Tiling": "可平鋪",
|
||
"Tiling direction": "分块方向",
|
||
"Tilt adjustment threshold": "俯仰调节阈值",
|
||
"tilt canvas up/down in degrees per frame": "以每帧为单位向上/向下倾斜画布",
|
||
"Tilt shift": "移轴 (镜头)",
|
||
"Tilt-Shift": "Tilt-Shift (移轴)",
|
||
"Time": "时间",
|
||
"Time in ms to wait before triggering completion again": "再次显示自动补全标签的等待时间 (单位: 毫秒)",
|
||
"Time in ms to wait before triggering completion again (Requires restart)": "在再次觸發完成之前等待的毫秒數（需要儲存設定並重新啟動）",
|
||
"Time period:": "时间范围: ",
|
||
"Time Period:": "时间范围: ",
|
||
"timestamp": "时间戳",
|
||
"Time taken:": "用時：",
|
||
"Tips": "小提示",
|
||
"title": "标题",
|
||
"Title": "职位",
|
||
"to": "至",
|
||
"To apply, go to quick set. Save now works immediately in other tab without restart, filters out non-common between tabs.": "要应用，请转到快速设置。现在保存可以立即在其他选项卡中工作，无需重新启动，过滤掉选项卡之间的不常见内容。",
|
||
"to discuss about Cozy Nest": "去讨论关于 Cozy Nest 的话题~",
|
||
"To enable, check use_mask in the Init tab": "如需启用，请检查是否启用初始化选项卡中的 启用蒙版 选项",
|
||
"To first difference": "补全到首次差异",
|
||
"to (full path)": "到 (输入完整路径)",
|
||
"To Generate Your Prompt in All Available Styles, Its Better to set batch count to 77 ( Style Count)": "以所有的可用的样式生成提示词，最好把总批次数设置为 77 （目前样式总数）",
|
||
"Toggle overlap": "重叠切换",
|
||
"🤗 token": "🤗 令牌",
|
||
"Token": "词元",
|
||
"Tokenize": "標記拆分",
|
||
"Token Length": "词元长度",
|
||
"Token Merging": "高分修复TOME",
|
||
"Token Merging - Max downsample": "TOME - 最大降采样",
|
||
"Token merging ratio": "Token 合并比率",
|
||
"Token Merging - Ratio": "TOME 合并比率",
|
||
"Token merging ratio for high-res pass": "高分层的 Token 合并比率",
|
||
"Token merging ratio for img2img": "图生图的 Token 合并比率",
|
||
"Token Merging (ToMe)": "词元合并 (ToMe)",
|
||
"To Language": "翻譯為：",
|
||
"ToMe for Hires. fix": "为高分辨率修复启用 Tokens 合并优化",
|
||
"ToMe max. tokens": "Token 合并最大词元数",
|
||
"ToMe merge ratio": "Token 合并比率",
|
||
"ToMe Merging Ratio": "ToMe 合并比率",
|
||
"ToMe seed": "Token 合并随机数种子",
|
||
"Tone Curve": "色调曲线",
|
||
"To next folder level": "补全到下一级文件夹",
|
||
"Toolkit": "模型工具箱",
|
||
"Tools": "工具",
|
||
"top": "顶部",
|
||
"top-bottom": "上 - 下",
|
||
"Top/Bottom Balance": "上/下平衡",
|
||
"top_centered": "顶部居中",
|
||
"torch GPU test": "Torch GPU 测试",
|
||
"to read the documentation of each parameter.": "阅读关于各参数的说明。",
|
||
"to share your creations and suggestions.": "來分享您的創作和建議。",
|
||
"total": "总计",
|
||
"(Total)": "(合计)",
|
||
"Total num of layers (reload required)": "图层总数 (需要重启)",
|
||
"Total num of point for curve (reload required)": "曲线点总数 (需要重启)",
|
||
"to understand following options.": "以理解下方选项。",
|
||
"To use an alternate VAE, you can specify the path to a directory containing a pytorch_model.bin representing your VAE.": "若要使用其他 VAE ，可以指定一个包含代表 VAE 的 pytorch_model.bin 目录的路径。",
|
||
"(To work correctly in firefox, turn off 'Automatically search the page text when typing' in the browser settings)": "(如想在 Firefox 浏览器中正常工作，请在浏览器设置中关闭 \"若在文本框外输入，则在页面中查找文本\" 选项)",
|
||
"Train": "訓練",
|
||
"Train an embedding or Hypernetwork; you must specify a directory with a set of 1:1 ratio images": "訓練嵌入或者超網路；必須指定一個具有一組 1:1 比例圖像的目錄",
|
||
"Trained tags (if any):": "训练标签 (如有): ",
|
||
"Trained Tags (if any):": "训练标签 (如有): ",
|
||
"Train EMA": "训练 EMA",
|
||
"Train embedding": "训练嵌入式模型",
|
||
"Train Embedding": "訓練嵌入",
|
||
"Train hypernetwork": "训练超网络",
|
||
"Train Hypernetwork": "訓練超網路",
|
||
"Train Imagic Only": "僅意象訓練",
|
||
"training": "訓練",
|
||
"Training": "訓練",
|
||
"Training dataset tags": "訓練數據集標記",
|
||
"Training info": "訓練資訊",
|
||
"Training parameters": "訓練參數",
|
||
"Training Prompts": "訓練提示詞",
|
||
"Training Steps Per Image (Epochs)": "每張圖像的訓練步數（訓練週期）",
|
||
"Training Wizard (Object/Style)": "訓練嚮導（物件 / 樣式）",
|
||
"Training Wizard (Person)": "訓練嚮導（人物）",
|
||
"Train Model": "训练模型",
|
||
"Train multiple concepts from a JSON file or string.": "从 JSON 文件或字符串训练多个概念。",
|
||
"Train Text Encoder": "训练文本编码器",
|
||
"Train U-Net": "訓練 U-Net",
|
||
"Train UNET": "訓練 UNET",
|
||
"Train with DreamArtist": "使用夢想家（DreamArtist）訓練",
|
||
"Trajectory": "运动轨迹",
|
||
"Transform Center X": "旋转中心点 X 轴",
|
||
"Transform Center Y": "旋转中心点 Y 轴",
|
||
"Transition Smoothness": "过渡平滑程度",
|
||
"translate": "翻譯",
|
||
"Translate": "翻译",
|
||
"translated fail:": "翻译失败：",
|
||
"Translated Negative Prompt": "反向提示词翻译",
|
||
"Translated Prompt": "提示词翻译",
|
||
"Translated Status": "翻譯狀態",
|
||
"translated text": "翻譯",
|
||
"Translated Text": "翻譯文字",
|
||
"Translate Negative Prompt": "翻译反向提示词",
|
||
"Translate Prompt": "翻译提示词",
|
||
"Translate prompt words into:": "将提示词翻译为：",
|
||
"Translate: x, y, z": "移动幅度：x, y, z",
|
||
"Translation display order": "翻譯顯示順序",
|
||
"Translation filename": "翻譯檔檔名",
|
||
"Translation file uses old 3-column translation format instead of the new 2-column one": "翻譯檔使用舊的三欄位翻譯格式，而非新的兩欄位格式",
|
||
"Translation First": "翻譯優先",
|
||
"Translation Service Setting": "翻译服务设置",
|
||
"Translation X": "平移 X",
|
||
"Translation Y": "平移 Y",
|
||
"Translation Z": "平移 Z",
|
||
"Transparent": "透明",
|
||
"[transparent-background]": "[透明背景]",
|
||
"transparent-background": "透明背景",
|
||
"transparent-background AND clipseg": "透明背景和 CLIP 分割",
|
||
"transparent-background options": "透明背景选项",
|
||
"Transparent PNG": "透明PNG",
|
||
"Treat card description as HTML": "将卡片描述视作 HTML",
|
||
"Treat LoCon's as LORA's": "将 LoCon 视为 LORA ",
|
||
"Tree": "Tree (树状)",
|
||
"Tribal": "Tribal (部落民族)",
|
||
"(triggers when a tensor with NaNs is produced in VAE; disabling the option in this case will result in a black square image)": "(在 VAE 中生成带有 NaNs 的 tensor 时触发，这种情形下若本选项禁用会导致黑图)",
|
||
"(triggers when a tensor with NaNs is produced in VAE; disabling the option in this case will result in a black square image; if enabled, overrides the option below)": "(在 VAE 中生成带有 NaNs 的 tensor 时触发，这种情形下若本选项禁用会导致黑图; 若启用本选项, 将覆盖此选项下方的选项)",
|
||
"Trigger Word": "触发词",
|
||
"Trim mask by sketch": "根据草图修剪蒙版",
|
||
"Triple sum:A*(1-alpha-beta)+B*alpha+C*beta": "三重加权和: A*(1-α-β)+B*α+C*β",
|
||
"True": "是",
|
||
"Truncate tags by token count": "按词元长度截断标签",
|
||
"Truncate tags by token count.": "按词元长度截断标签",
|
||
"Try to add known trigger words for LORA/LyCO models": "尝试为 LoRA/LyCORIS 模型添加已知触发词",
|
||
"Tuning": "調整",
|
||
"Turn on pin_memory for DataLoader. Makes training slightly faster but can increase memory usage.": "對 DataLoader 開啟 pin_memory。使訓練略快，但可能會增加記憶體使用量。",
|
||
"Tutorial": "教學",
|
||
"Tweening frames schedule": "中间计算帧调度计划",
|
||
"txt2img": "文生圖",
|
||
"TXT2IMG": "文生图",
|
||
"txt2img-grids": "文生圖網格",
|
||
"txt2img history": "文生图历史记录",
|
||
"txt2img/img2img UI item order": "文生圖 / 圖生圖 UI 項目順序",
|
||
"Type": "類型",
|
||
"type of image": "图像类型",
|
||
"Typography": "Typography (字体排印)",
|
||
"UI alternatives": "UI 替代方案",
|
||
"UI Component order": "UI 组件排序",
|
||
"UI Default global post processing face restorer (requires restart)": "UI 默认全局后期处理面部修复模型 (需重启)",
|
||
"UI Default global post processing face restorer visibility (requires restart)": "UI 默认全局后期处理面部修复可见程度 (需重启)",
|
||
"UI Default global post processing face restorer weight (requires restart)": "UI 默认全局后期处理面部修复权重 (需重启)",
|
||
"UI Default global post processing upscaler (requires restart)": "UI 默认全局后期处理放大算法 (需重启)",
|
||
"UI Default global post processing upscaler visibility(requires restart)": "UI 默认全局后期处理放大算法强度 (需重启)",
|
||
"UI Default inpainting negative prompt [gender] (requires restart)": "UI 默认重绘 [性别] 反向提示词 (需重启)",
|
||
"UI Default inpainting prompt [gender] is replaced by man or woman (requires restart)": "UI 默认重绘 [性别] 提示词替换为男性或女性 (需重启)",
|
||
"UI item order for txt2img/img2img tabs": "文生图/图生图 界面元素顺序",
|
||
"UI related": "使用者介面相關",
|
||
"UI tab order": "标签栏元素顺序",
|
||
"ui text": "使用者介面文字",
|
||
"UI theme": "UI 主题",
|
||
"ukiyo-e": "ukiyo-e (浮世绘)",
|
||
"ultrafast": "极致速度",
|
||
"ultrawide": "ultrawide (超宽图)",
|
||
"Uncategorized": "未分类",
|
||
"Uncatgorized": "未分类",
|
||
"Uncheck all copies": "取消勾选所有选择",
|
||
"Underscore replacement excludes (split by comma)": "下划线替换排除项 (逗号分隔)",
|
||
"Undo": "重做",
|
||
"U-Net features": "U-Net 特征值",
|
||
"UNet Weight 1": "UNet 權重 1️⃣",
|
||
"UNet Weight 2": "UNet 權重 2️⃣",
|
||
"UNet Weight 3": "UNet 權重 3️⃣",
|
||
"UNet Weight 4": "UNet 權重 4️⃣",
|
||
"UNet Weight 5": "UNet 權重 5️⃣",
|
||
"Unfreeze Model": "解凍模型",
|
||
"Unfreeze seed": "不固定种子",
|
||
"Unfreezes model layers and allows for potentially better training, but makes increased VRAM usage more likely.": "解冻模型分层来获得更好的训练效果，但更有可能只是单纯增加显存的使用量。",
|
||
"Unified Predictor-Corrector Framework for Fast Sampling of Diffusion Models": "統一的預測校正框架用於快速採樣擴散模型",
|
||
"uniform": null,
|
||
"Uniform noise covers the entire frame. It somewhat flattens and sharpens the video over time, but may be good for cartoonish look. This is the old default setting.": "均匀噪声覆盖整个画面。随着时间的推移，它会在一定程度上使视频变得平滑和锐利，但也许适合卡通效果。曾是旧版本的默认设置。",
|
||
"UniPC lower order final": "UniPC 最終步採用低階取樣。",
|
||
"UniPC order": "UniPC 低阶步数",
|
||
"UniPC Order": "UniPC 取樣順序。",
|
||
"UniPC order (must be < sampling steps)": "UniPC 的预测校正次数 (需小于采样步数)",
|
||
"UniPC skip type": "UniPC 跳過類型",
|
||
"UniPC variant": "UniPC 變體",
|
||
"unknown": "未知",
|
||
"Unlink seed from prompt": "將隨機種子與提示詞解綁",
|
||
"Unload": "卸载",
|
||
"Unload all interrogate models": "卸载所有反推模型",
|
||
"Unload all models from memory": "从内存中卸载所有模型",
|
||
"unload model": "卸载模型",
|
||
"Unload model": "卸载模型",
|
||
"Unload Model": "卸载模型",
|
||
"Unload model after running": "反推完成后卸载模型",
|
||
"Unload models": "卸载模型",
|
||
"Unload model to free VRAM": "卸载模型以释放显存",
|
||
"Unload SD checkpoint to free VRAM": "卸載模型權重存檔點以釋放 VRAM",
|
||
"Unload SD checkpoint to RAM": "卸载 SD 模型到内存中",
|
||
"Unload VAE and CLIP from VRAM when training": "训练时从显存中卸载 VAE 和 CLIP 模型",
|
||
"Unnecessary Javascript file": "多余的 Javascript 文件",
|
||
"Unprompted Seed": "Unprompted 随机数种子",
|
||
"Unprompted Template Editor": "Unprompted 模板编辑器",
|
||
"unzip the file to": "将文件解压缩到",
|
||
"up": "上",
|
||
"Upcast cross attention layer to float32": "將交叉注意層升級為 float32",
|
||
"Upcast cross attention layer to FP32": "将交叉关注层向上转换到 FP32",
|
||
"update": "更新",
|
||
"Update": "更新",
|
||
"Update All Tags": "更新所有标签",
|
||
"Update assigned tags": "更新已选标签的模型",
|
||
"Updated At": "更新于",
|
||
"Update Dataset": "上传数据集",
|
||
"Update directory names in database": "更新数据库中的文件夹名字",
|
||
"Update Extension and Restart": "更新擴充並重新啟動",
|
||
"Update image generation information (Experimental)": "更新图像生成信息 (实验性)",
|
||
"Update installed extensions": "更新已安装扩展",
|
||
"update list": "更新列表",
|
||
"Update Mask": "更新蒙版",
|
||
"Update model info & tags": "更新模型信息和标签",
|
||
"Update model preview": "更新模型预览",
|
||
"Update Models": "更新模型",
|
||
"Update Selected Tags": "更新所选项目的标签",
|
||
"Update tags for:": "为所选项目更新标签: ",
|
||
"update time": "按更新时间",
|
||
"uploaded video FPS": "上传视频的帧率",
|
||
"uploaded video resolution": "上传视频的分辨率",
|
||
"uploaded video total frame count": "上传视频的总帧数",
|
||
"Upload GIF": "上传 GIF",
|
||
"Upload image": "上传图像",
|
||
"Upload Image or .cni file": "上传图像或 .cni 文件",
|
||
"Upload Images": "上传图像",
|
||
"Upload independent control image": "上传独立的控制图像",
|
||
"Uploading...": "上传中...",
|
||
"Upload mask": "上传蒙版图片",
|
||
"Upload mask here cus gradio": "在此上传蒙版",
|
||
"Upload mask image": "上传蒙版图片",
|
||
"Upload Mask to ControlNet Inpainting": "上传蒙版到 ControNet 重绘",
|
||
"Upload OR TTS": "上传音频或 TTS",
|
||
"Upload prompt inputs": "上傳提示詞輸入檔案",
|
||
"Upper Arm": "上臂长度",
|
||
"Upper limit for X": "X 值上限",
|
||
"Upscale": "图像放大",
|
||
"Upscale Before Restoring Faces": "放大后再进行面部修复",
|
||
"Upscale by": "放大至",
|
||
"Upscaled swapper mask erosion factor, 1 = default behaviour.": "放大变换的蒙版腐蚀系数，1 = 默认行为",
|
||
"Upscale factor": "放大倍数",
|
||
"Upscale height": "放大高度",
|
||
"Upscale height to": "将高度放大到",
|
||
"Upscale image normally, split result into tiles, improve each tile using img2img, merge whole image back": "正常放大图像，将结果分割成分块(tiles)，用图生图改进每个图块，最后将整个图像合并回来",
|
||
"Upscale image with IMG2IMG": "通过图生图放大图像",
|
||
"Upscale method": "放大方法",
|
||
"Upscale model": "超分模型",
|
||
"upscale output imgs when run is finished": "运行结束后放大输出图像",
|
||
"Upscaler": "放大演算法",
|
||
"upscaler 1": "放大算法 1",
|
||
"Upscaler 1": "放大演算法 1",
|
||
"upscaler 2": "放大算法 2",
|
||
"Upscaler 2": "放大演算法 2",
|
||
"Upscaler 2 vis.": "放大算法 2 可见程度",
|
||
"Upscaler 2 visibility": "放大演算法 2 可見度",
|
||
"Upscale ratio": "放大比率",
|
||
"Upscale resize": "放大倍数",
|
||
"Upscaler for img2img": "圖生圖的放大演算法",
|
||
"Upscaler scale": "放大倍数",
|
||
"Upscaler visibility (if scale = 1)": "放大强度（如果倍率=1）",
|
||
"*Upscale uploaded video*": "*放大已上传的视频*",
|
||
"Upscale width": "放大宽度",
|
||
"Upscale width to": "将宽度放大到",
|
||
"Upscaling": "放大",
|
||
"Upscaling is performed on the whole image and all faces (including not swapped). Upscaling happens before face restoration.": "对整个图像和所有面部 (包括未变换的面部) 进行放大。放大在面部修复之前进行",
|
||
"URL": "網址",
|
||
"URL for extension's git repository": "擴充功能的 git 倉庫網址",
|
||
"Usage guide": "使用指南",
|
||
"Use": "使用 ",
|
||
"use 256/512 model?": "使用 256 或 512 分辨率模型？",
|
||
"Use a": "启用一个",
|
||
"Use A1111 resize mode when input is from A1111.": "当输入图来自 A1111 时，使用 A1111 的缩放模式",
|
||
"Use a grayscale image as a mask on your init image. Whiter areas of the mask are areas that change more.": "在初始化图像上使用灰度图像作为蒙版。蒙版区域中越接近白色变化越大",
|
||
"Use alpha as mask": "启用透明度蒙版",
|
||
"Use an": "使用一个",
|
||
"Use an empty output directory to save pictures normally instead of writing to the output directory.": "輸出圖像到一個空目錄，而非設定裡指定的輸出目錄。",
|
||
"Use another image as ControlNet input": "使用另外的图像输入 ControlNet",
|
||
"Use another image as mask": "使用另外的图像作为遮罩",
|
||
"(Use # anywhere in the prompt to hide the text between # and the end of the line from the generation.)": "(在提示词中的任意位置使用 # 可以从生成中隐藏 # 和行尾之间的文本)",
|
||
"Use a two step process to partially create an image at smaller resolution, upscale, and then improve details in it without changing composition": "使用兩步處理的時候，以較小的解析度生成初步圖像，接著放大圖像，然後在不更改構圖的情況下改進其中的細節",
|
||
"Use automatic height for gallery (requires Gradio >= 3.36.0)": "启用画廊自动高度 (需要 Gradio 版本 >= 3.36.0)",
|
||
"Use base prompt": "使用基础提示词 (Base Prompt)",
|
||
"Use BLIP for caption": "使用 BLIP 產生描述（自然語言描述）",
|
||
"Use brush": "使用画笔",
|
||
"Use color corrections": "使用色彩校正",
|
||
"Use common negative prompt": "使用常见反面提示词 (Common Negative Prompt)",
|
||
"Use common prompt": "使用常见提示词 (Common Prompt)",
|
||
"Use Concepts List": "使用概念列表",
|
||
"Use Control Net inpaint model": "使用 ControlNet 的 inpait 模型",
|
||
"Use CPU": "使用 CPU",
|
||
"Use CPU for SAM": "使用 CPU 进行 SAM 处理",
|
||
"Use CPU Only (SLOW)": "只用 CPU (很慢)",
|
||
"Use cross attention optimizations while training": "訓練時開啟 cross attention 最佳化",
|
||
"Use custom colors": "使用自定义颜色",
|
||
"Use custom DepthMap": "使用自定义深度图",
|
||
"Use Custom Threshold (Booru)": "使用自定义阈值 (Booru)",
|
||
"Use Custom Threshold (WDv1.4 Tagger)": "使用自定义阈值 (WDv1.4 标签器)",
|
||
"Use deepbooru for caption": "使用 deepbooru 產生描述（標記）",
|
||
"Use delta values for movement parameters": "使用增量值作为运动参数",
|
||
"Use Depth Map If exists in /video_key_depth": "使用深度图（如果存在/video_key_depth目录）",
|
||
"Use depth warping": "启用深度变形",
|
||
"(used for refiner model negative prompt)": "(用于 refiner 模型的反向提示词)",
|
||
"(used for refiner model prompt)": "(用于 refiner 模型的正向提示词)",
|
||
"Used for securing the Web API. Click the refresh button to the right to (re)generate your key, the trash icon to remove it.": "用于保护 Web API 的安全。点击右侧刷新按钮可 (重新) 生成密钥，点击垃圾桶按钮可移除密钥。",
|
||
"Use different seed for each picture": "對每張圖片使用不同的種子",
|
||
"Use dropdown for sampler selection instead of radio group": "使用下拉式選單代替單選群組選擇取樣器",
|
||
"Use dropout": "採用 dropout 防止過擬合",
|
||
"Use EMA": "使用 EMA",
|
||
"Use EMA for finetuning": "使用 EMA 权重进行微调",
|
||
"Use EMA for prediction": "使用 EMA 進行預測",
|
||
"Use EMA Weights for Inference": "使用EMA權重進行推論",
|
||
"use Face Crop img2img": "使用图生图脸部修复",
|
||
"Use Fast Mode(It will be faster, but the quality of the mask will be lower.)": "使用快速模式（它会更快，但蒙版质量会较低）。",
|
||
"Use FP16 or BF16 (if available) will help improve memory performance. Required when using 'xformers'.": "使用 FP16 或 BF16 (如可用) 有助于提高内存性能。启用 \"xformers\" 时需要。",
|
||
"(Use FP8 to store Linear/Conv layers' weight. Require pytorch>=2.1.0.)": "(使用 FP8 来储存 Linear/Conv 层的权重。需要 Pytorch 版本 >=2.1.0)",
|
||
"(useful for developing: if you make changes to UI scripts code, it is applied when the UI is reloded.)": "(对于开发很方便: 如果改动了 UI 脚本代码, 它会在UI重新加载时应用代码相应的更改)",
|
||
"(Useful for users who use PortMaster or other software that controls the DNS)": "(对于使用 PortMaster 或其他控制 DNS 的软件的用户有用)",
|
||
"(Useful to prevent hanging if you use a very large wildcard collection.)": "(适用于本地有大型通配符集合时, 预防刷新进程被挂起)",
|
||
"Use GPU": "使用 GPU",
|
||
"Use GPU, only for CUDA on Windows/Linux - experimental and risky, can messed up dependencies (requires restart)": "使用 GPU, 仅限 Windows/Linux 上使用 CUDA - 实验中且高风险, 可能损坏依赖 (需要重启)",
|
||
"Use half floats": "启用半精度浮点",
|
||
"Use Hash from Metadata (May have false-positives but can be useful if you've pruned models)": "使用元数据中的哈希 (可能会有误报，但对已修剪的模型很有用)",
|
||
"Use improved segmented mask (use pastenet to mask only the face)": "使用改良的分离蒙版 (通过 pastenet 仅标记面部)",
|
||
"Use init": "启用初始化",
|
||
"Use init image as video": "使用初始图像作为视频",
|
||
"Use init image instead of video. Doesn't require generation of inputframes.": "使用初始图像代替视频。无需生成输入帧",
|
||
"Use inpaint width/height": "启用自定义重绘宽高",
|
||
"Use input image's alpha channel as mask": "使用输入图像的透明度通道作为遮罩",
|
||
"Use Interrogator Caption": "使用反推打标",
|
||
"Use Jit": "使用实时产出模式",
|
||
"Use kohya-ss's finetuning metadata json": "使用 kohya-ss 的微调 metadata json",
|
||
"Use local groundingdino to bypass C++ problem": "启用本地 Groundingdino 以绕过 C++ 问题",
|
||
"Use local HTML file for model info": "使用本地 HTML 文件作为模型信息",
|
||
"Use LORA": "使用 LoRA",
|
||
"Use LORA directory for LoCon's": "LoCon 使用 LORA 目录",
|
||
"Use Lora in uc diffusion model": "在反向提示詞的diffusion model使用LoRA",
|
||
"Use Lora in uc text model encoder": "在反向提示詞的text model encoder使用LoRA",
|
||
"Use lossless compression for webp images": "對 webp 圖像使用無損壓縮",
|
||
"Use LyCoris handler for all Lora types": "使用 LyCORIS 处理器加载所有 Lora 模型",
|
||
"Use main sampler": "使用文生图采样方法",
|
||
"Use mask": "启用蒙版",
|
||
"Use mask as output alpha channel": "使用遮罩作为透明度通道输出",
|
||
"Use mask video": "使用视频蒙版",
|
||
"Use \"Maximum dimension\" for aspect ratio buttons (by default we use the max width or height)": "使用 “最大尺寸” 作为纵横比按钮 (默认使用最大宽度或最大高度)",
|
||
"use MBW": "使用分块合并",
|
||
"use Merge Block Weights": "使用分块合并",
|
||
"Use mid-control on highres pass (second pass)": "进行高分辨率修复时使用中间层控制 (mid-control)",
|
||
"Use minimal area (for close faces)": "使用最小区域（适用近处的脸）",
|
||
"Use minimal area for face selection": "用最小面积进行脸部选择",
|
||
"Use model EMA weights when possible": "尽可能使用模型 EMA 权重",
|
||
"Use noise mask": "启用噪声蒙版",
|
||
"Use old aspect ratio formula": "使用旧版纵横比格式",
|
||
"Use old emphasis implementation. Can be useful to reproduce old seeds.": "使用舊的強調符實作。可用於復現舊隨機種子",
|
||
"Use old karras scheduler sigmas (0.1 to 10).": "使用舊的 karras 調度器 sigma（0.1 至 10）",
|
||
"Use old prompt editing timelines.": "使用旧的提示词时间分布表达式",
|
||
"Use only-mid-control on high-res. fix (second pass)": "在高分辨率修复 (第二通道) 中仅使用中间层 (mid-control) 控制",
|
||
"use optical flow estimation for your in-between (cadence) frames": "对中间 (间隔) 帧启用光流估计",
|
||
"Use optimized images in the thumbnail interface (significantly reduces the amount of data transferred)": "在缩略图界面中使用优化的图像 (显著减少传输数据量)",
|
||
"Use original name for output filename during batch process in extras tab": "在更多頁籤中的批量處理過程中，使用原始名稱作為輸出檔案名",
|
||
"Use output of nth layer from back of text encoder (n>=1)": "使用文本编码器 (TE/CLIP) 后第 n 层的输出 (n>=1)",
|
||
"Use PNG alpha channel as loss weight": "使用 PNG 透明通道作為損失權重",
|
||
"Use Preprocess image If exists in /controlnet_preprocess": "使用预处理图像（如果存在/controlnet_preprocess目录）",
|
||
"use prompt and setting by image": "按图像信息使用提示词和设置",
|
||
"Use prompt from preview image": "一键使用本模型预览图所使用的提示词",
|
||
"User agent for requests": "发送请求使用的 User-Agent",
|
||
"Use random seeds for sub-generations when doing a rolling generation (WARNING!!! The result will be non-deterministic!!!)": "在进行梯度放大倍数生成时, 对子代生成应用随机种子 (警告!!! 图像结果随机无法复现!!!)",
|
||
"Use raw CLIP token to calculate token count (without emphasis or embeddings)": "使用原始 CLIP 词元数计算词元长度（不含 emphasis 或 embeddings）",
|
||
"Use recursive with glob pattern": "使用 glob 模式递归搜索",
|
||
"Use recycle bin when deleting images": "刪除圖像時丟入資源回收桶",
|
||
"Use regex": "使用正则表达式",
|
||
"User interface": "使用者介面",
|
||
"User Interface": "用户界面",
|
||
"username": "用户名",
|
||
"User name": "用户名",
|
||
"Username": "用户名",
|
||
"Uses aesthetic image scorer extension to check the quality of the image.": "使用 aesthetic image scorer (美学图像评分) 插件来检测图像质量",
|
||
"Use same checkpoint": "使用相同 SD 模型",
|
||
"Use same random seed for all lines": "每行輸入都使用同一個隨機種子",
|
||
"Use same sampler": "使用相同采样方法",
|
||
"Use same seed for all images": "为所有图像使用同一个随机种子",
|
||
"Use same VAE": "使用相同 VAE",
|
||
"use scale": "启用缩放",
|
||
"Use SD webui's built-in hashing functions for model hashes. If SD webui was launced with `--no-hashing`, hashing will fail, but this provides a hash cache, which should make repeat model scanning faster.": "模型使用 SD WebUI 内置的哈希函数。若使用 “--no-hashing” 命令启动 SD WebUI，计算哈希会失败；但 WebUI 提供哈希缓存，使重复扫描更快速",
|
||
"Use SD webui's built-in hashing functions for model hashes. This provides a hash cache, which should make repeat model scanning faster and make hashes reusable across features.": "模型哈希使用 SD WebUI 内置的哈希函数。这可作为一份哈希缓存跨功能复用，使重复模型扫描更快速",
|
||
"Use separate CFG scale": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 10th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 2nd": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 3rd": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 4th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 5th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 6th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 7th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 8th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 9th": "使用独立的提示词引导系数",
|
||
"Use separate checkpoint": "使用独立模型",
|
||
"Use separate checkpoint 10th": "使用独立模型",
|
||
"Use separate checkpoint 2nd": "使用独立模型",
|
||
"Use separate checkpoint 3rd": "使用独立模型",
|
||
"Use separate checkpoint 4th": "使用独立模型",
|
||
"Use separate checkpoint 5th": "使用独立模型",
|
||
"Use separate checkpoint 6th": "使用独立模型",
|
||
"Use separate checkpoint 7th": "使用独立模型",
|
||
"Use separate checkpoint 8th": "使用独立模型",
|
||
"Use separate checkpoint 9th": "使用独立模型",
|
||
"Use separate CLIP skip": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 10th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 2nd": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 3rd": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 4th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 5th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 6th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 7th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 8th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 9th": "使用独立 CLIP 终止层数",
|
||
"Use separate noise multiplier": "使用独立噪声参数",
|
||
"Use separate noise multiplier 10th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 2nd": "使用独立噪声参数",
|
||
"Use separate noise multiplier 3rd": "使用独立噪声参数",
|
||
"Use separate noise multiplier 4th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 5th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 6th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 7th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 8th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 9th": "使用独立噪声参数",
|
||
"Use separate sampler": "使用独立采样方法",
|
||
"Use separate sampler 10th": "使用独立采样方法",
|
||
"Use separate sampler 2nd": "使用独立采样方法",
|
||
"Use separate sampler 3rd": "使用独立采样方法",
|
||
"Use separate sampler 4th": "使用独立采样方法",
|
||
"Use separate sampler 5th": "使用独立采样方法",
|
||
"Use separate sampler 6th": "使用独立采样方法",
|
||
"Use separate sampler 7th": "使用独立采样方法",
|
||
"Use separate sampler 8th": "使用独立采样方法",
|
||
"Use separate sampler 9th": "使用独立采样方法",
|
||
"Use separate steps": "使用独立迭代步数",
|
||
"Use separate steps 10th": "使用独立迭代步数",
|
||
"Use separate steps 2nd": "使用独立迭代步数",
|
||
"Use separate steps 3rd": "使用独立迭代步数",
|
||
"Use separate steps 4th": "使用独立迭代步数",
|
||
"Use separate steps 5th": "使用独立迭代步数",
|
||
"Use separate steps 6th": "使用独立迭代步数",
|
||
"Use separate steps 7th": "使用独立迭代步数",
|
||
"Use separate steps 8th": "使用独立迭代步数",
|
||
"Use separate steps 9th": "使用独立迭代步数",
|
||
"Use separate VAE": "使用独立 VAE",
|
||
"Use separate VAE 10th": "使用独立 VAE",
|
||
"Use separate VAE 2nd": "使用独立 VAE",
|
||
"Use separate VAE 3rd": "使用独立 VAE",
|
||
"Use separate VAE 4th": "使用独立 VAE",
|
||
"Use separate VAE 5th": "使用独立 VAE",
|
||
"Use separate VAE 6th": "使用独立 VAE",
|
||
"Use separate VAE 7th": "使用独立 VAE",
|
||
"Use separate VAE 8th": "使用独立 VAE",
|
||
"Use separate VAE 9th": "使用独立 VAE",
|
||
"Use separate width/height": "使用独立重绘宽高",
|
||
"Use separate width/height 10th": "使用独立重绘宽高",
|
||
"Use separate width/height 2nd": "使用独立重绘宽高",
|
||
"Use separate width/height 3rd": "使用独立重绘宽高",
|
||
"Use separate width/height 4th": "使用独立重绘宽高",
|
||
"Use separate width/height 5th": "使用独立重绘宽高",
|
||
"Use separate width/height 6th": "使用独立重绘宽高",
|
||
"Use separate width/height 7th": "使用独立重绘宽高",
|
||
"Use separate width/height 8th": "使用独立重绘宽高",
|
||
"Use separate width/height 9th": "使用独立重绘宽高",
|
||
"Uses Imagic for training instead of full dreambooth, useful for training with a single instance image.": "使用 Imagic 进行训练，而不是使用完整的 Dreambooth，这对单图像训练非常有效。",
|
||
"Uses Low-rank Adaptation for Fast Text-to-Image Diffusion Fine-tuning. Uses less VRAM, saves a .pt file instead of a full checkpoint": "使用低秩微调模型进行快速的文生图扩散微调。需要的显存更小，保存一个 .pt 格式的文件而不是完整的大模型。",
|
||
"Use Smart-Steps": "优化迭代次数",
|
||
"Use Space Instead Of _": "使用 \"空格 \" 代替 \"下划线_\"",
|
||
"Use spaces instead of underscore": "使用空格代替下划线",
|
||
"Use static shapes.": "使用静态形状 (固定分辨率)",
|
||
"Uses the lexica.art API to create random prompts.\nThe prompt in the main prompt box is used as a search string.\nLeaving the prompt box blank returns a list of completely randomly chosen prompts.\nTry it out, it can be quite fun.": "用 lexica.art API 生成隨機提示詞\n提示詞框中的內容會作為搜索字串\n留空提示詞框會得到一組完全隨機選擇的提示詞\n用用看，它會很有趣",
|
||
"Use sub folders inside custom images location": "使用自定义图像位置内的子文件夹",
|
||
"Uses your": "使用你的",
|
||
"Use tags like [seed] and [date] to define how filenames for images are chosen. Leave empty for default.": "使用[seed]和[date]等标记来选择如何定义图像的文件名。留空使用默认值",
|
||
"Use tags like [seed] and [date] to define how subdirectories for images and grids are chosen. Leave empty for default.": "使用[seed]和[date]等标记来选择如何定义图像和网格的子目录。留空使用默认值",
|
||
"Use Text Escape": "使用文本转义",
|
||
"Use text inputs instead of dropdowns": "使用文本輸入而不是下拉選單",
|
||
"(use (text) to make model pay more attention to text and [text] to make it pay less attention)": "(对提示词使用 (文本) 这样的格式使模型更关注该文本, 同理, 使用 [文本] 这样的格式来减少对该文本的关注度)",
|
||
"Use the filter icon to filter results.": "使用筛选图标来筛选所需内容",
|
||
"Use the img2img inpainting tab.": "使用图生图局部重绘面板。",
|
||
"Use the negative_prompts field to automatically append all words as a negative prompt. *Don't* add --neg in the negative_prompts field!": "使用 negative_prompts 字段自动将所有单词附加为反向提示词，不要在 negative_prempts 字段中添加 --neg ！",
|
||
"Use the wildcard in your script by typing the name of the file or copying the text from the Wildcards file text box": "通过键入文件名或从通配符文件文本框中复制文本，来将通配符应用到你的脚本中",
|
||
"Use the wildcard in your script by typing the name of the file or copying the text from the Wildcards file text box.": "通过键入文件名或从 \"通配符文件\" 文本框中复制文本来在脚本中使用通配符",
|
||
"Use this extension to generate optimized engines and enable the best performance on NVIDIA RTX GPUs with TensorRT. Please follow the instructions below to set everything up.": "使用此扩展生成优化过的引擎，并在带有 TensorRT 的 NVIDIA RTX GPU 上实现最佳性能。请按照以下说明进行设置。",
|
||
"Use this negative prompt": "使用此框填写的反向提示词",
|
||
"Use this when scanning can not find a local model on civitai": "无法通过扫描获取本地模型信息时使用此功能",
|
||
"Use torch.compile to accelerate SwinIR.": "使用 torch.compile 加速 SwinIR",
|
||
"Use Ultimate SD Upscale script instead": "使用 Ultimate SD Upscale 脚本作为替代",
|
||
"Use Upscaled": "启用放大",
|
||
"Use upscaler name as filename suffix in the extras tab": "使用上色器名稱作為附加檔的檔名後綴",
|
||
"Use via API": "使用API",
|
||
"Use web address or local path. Note: if the image box below is used then this field is ignored.": "使用网页地址或者本地路径地址。注意：如果要使用下方的图像输入框，则忽略本段",
|
||
"Use wildcards for negative prompts": "对反向提示词使用通配符",
|
||
"Use xformers": "使用 xformers",
|
||
"V2 Model:": "V2 模型：",
|
||
"VAE Checkpoints to cache in RAM": "在快取記憶體中快取 VAE 模型權重存檔點",
|
||
"VAE Merger": "VAE 融合",
|
||
"VAE model": "VAE 模型",
|
||
"VAE type for decode": "用于解码的 VAE 类型",
|
||
"VAE type for encode": "用于编码的 VAE 类型",
|
||
"Validate": "验证",
|
||
"values": "固定值",
|
||
"values are recommended!": "值更推荐！",
|
||
"Values closer to 0 closely match your training dataset, and values closer to 1 generalize more and deviate from your training dataset. Default is 1e-2, values lower than 0.1 are recommended. For D-Adaptation values between 0.02 and 0.04 are recommended": "越接近 0 的值越和训练数据集匹配，而越接近 1 的值则越泛化且偏离训练数据集。默认 1e-2，推荐使用小于 0.1 的值。对于 D-Adaptation 推荐取 0.02 至 0.04 之间的值。",
|
||
"Value to set/add/mul": "用于 设置/添加/倍乘 的数值",
|
||
"Variational autoencoder": "变分自编码器",
|
||
"Variation seed": "差異隨機種子",
|
||
"Variation strength": "差異強度",
|
||
"Vectors": "向量",
|
||
"Vector Studio": "Vector Studio - 矢量工作室",
|
||
"verbose console output": "将详细信息输出到控制台",
|
||
"version": "版本",
|
||
"version:": "版本: ",
|
||
"Version": "版本",
|
||
"Version:": "版本: ",
|
||
"version 2.14.0 of the WebUI extension": "的 webui 扩展版本为: 2.14.0",
|
||
"vertical": "垂直",
|
||
"Vertical": "垂直",
|
||
"Vertical Mirroring": "垂直鏡像",
|
||
"vertical only": "仅垂直方向",
|
||
"vertical split num": "垂直分割数",
|
||
"Very cheap approximation. Very fast compared to VAE, but produces pictures with 8 times smaller horizontal/vertical resolution and extremely low quality.": "非常低負載的近似值。比 VAE 快得多，但是生成的圖片横縱分辨率要小 8 倍，品質非常低。",
|
||
"veryfast": "非常快",
|
||
"veryslow": "非常慢",
|
||
"vibrant": null,
|
||
"Vid2depth": "视频转深度",
|
||
"Video": "視訊",
|
||
"Video above or below gallery": "视频播放器位于画廊上方或下方",
|
||
"Video Depth": "视频深度",
|
||
"Video encoding": "视频编码",
|
||
"Video Init": "视频初始化",
|
||
"Video init path": "初始化视频路径",
|
||
"video_init_path, extract_nth_frame, overwrite_extracted_frames": "视频初始化路径, 提取第N帧, 覆盖提取帧",
|
||
"Video init path/ URL": "视频初始化路径/链接",
|
||
"Video Input": "影片輸入",
|
||
"video_input mode only, enables the extraction and use of a separate video file intended for use as a mask. White areas of the extracted video frames will not be affected by diffusion, while black areas will be fully effected. Lighter/darker areas are affected dynamically.": "仅 视频输入 模式使用，提取和使用单独的视频文件作为蒙版。提取的视频帧的白色区域将不受生成器的影响，而黑色区域将完全受到影响。较亮/较暗的区域会受到动态影响。",
|
||
"Video mask path": "视频蒙版路径",
|
||
"Video Name": "视频名称",
|
||
"Video output": "视频输出",
|
||
"Video Output Settings": "视频输出设置",
|
||
"Video path": "视频路径",
|
||
"Video player height (px)": "视频播放器高度 (px)",
|
||
"Video player width (px)": "视频播放器宽度 (px)",
|
||
"Video Segment Duration (seconds)": "视频片段长度（秒）",
|
||
"Video source": "视频源",
|
||
"Video to get Depth from": "从视频中获取深度",
|
||
"Video to Interpolate": "要插值的视频",
|
||
"Video to Upscale": "待放大视频",
|
||
"Video Upscaling": "视频放大",
|
||
"View changes": "查看更改",
|
||
"View Path": "视图路径",
|
||
"View Path Select": "视图路径选择",
|
||
"View saved data": "查看已保存数据",
|
||
"View the wiki for usage tips.": "点击查看 Wiki 获取使用说明",
|
||
"Vignette": "暗角",
|
||
"Visibility": "可见度",
|
||
". Visit": " 分隔。查看",
|
||
"Visualize": "視覺化",
|
||
"visualize and make template": "可视化并制作模板",
|
||
"Visualize Cross-Attention": "可視化跨注意力",
|
||
"Visual style": "视觉风格",
|
||
"vivid_light": "強烈光線",
|
||
"VRAM usage polls per second during generation.": "生成图像时, 每秒查询显存 (VRAM) 使用情况的次数",
|
||
"VRAM usage polls per second during generation. Set to 0 to disable.": "生成图像时，每秒查询显存 (VRAM) 使用情况的次数。设置为 0 可禁用",
|
||
"Waiting...": "等待中...",
|
||
"Want to figure out what a good prompt might be to create new images like an existing one? The CLIP Interrogator is here to get you answers!": "想知道生成类似于已有图像的新图像的最佳提示词是什么吗？CLIP Interrogator (CLIP 反推扩展) 将给你带来答案！",
|
||
"Warmup Period": "热身时间",
|
||
"Warn if changes in caption is not saved": "在描述的更改未被保存时发出警告",
|
||
"WARNING : Settings are immediately applied but will not be saved until you click \"Save\"": "警告：设置修改后会立即应用，但在点击“保存”之前不会被保存",
|
||
"WARNING : Some visual settings are immediately applied but will not be saved until you click \"Save\"": "警告: 部分视觉设置修改后会立即应用, 但在点击 ”保存“ 之前不会被保存",
|
||
"(Warning: This is an external site and very likely contains NSFW examples!)": "(警告: 外部网站可能包含成人内容!)",
|
||
"watercolor": "watercolor (水彩)",
|
||
"Watercolor": "Watercolor (水彩)",
|
||
"Wave offset (ignore this if you don't know what it means)": "波形偏移（如果你不知道这是什么，忽略就好）",
|
||
"Waves color": "波形颜色",
|
||
"WD 1.4 Tagger": "WD 1.4 標記器",
|
||
"WDv1.4 Tagger Score Threshold": "WDv1.4 标签器评分阈值",
|
||
"WebUI State": "WebUI 状态",
|
||
"Weight": "權重",
|
||
"Weight (0 = maximum effect, 1 = minimum effect)": "权重 (0 = 最强效果, 1 = 最弱效果)",
|
||
"Weight 1": "權重 1️⃣",
|
||
"Weight 2": "權重 2️⃣",
|
||
"Weight 3": "權重 3️⃣",
|
||
"Weight 4": "權重 4️⃣",
|
||
"Weight 5": "權重 5️⃣",
|
||
"Weight Decay": "權重衰減",
|
||
"Weighted sum": "加權和",
|
||
"Weights": "權重",
|
||
"weights alpha": "权重 α",
|
||
"Weights alpha": "权重 α",
|
||
"weights beta": "权重 β",
|
||
"Weights beta": "权重 β",
|
||
"Weight schedule": "权重调度计划",
|
||
"Weights Presets": "权重预设",
|
||
"Weights setting": "权重设置",
|
||
"Weights Setting": "权重设置",
|
||
"Weight sum": "加权和",
|
||
"Weight sum:A*(1-alpha)+B*alpha": "加权和: A*(1-α)+B*α",
|
||
"Weight threshold": "权重阈值",
|
||
"Weight values": "权重值",
|
||
"Weight_values": "权重值",
|
||
"Welcome to LightDiffusionFlow! (^o^)/~": "欢迎使用 LightDiffusionFlow! \\(^o^)/~",
|
||
"What directory the [📂] button opens": "选择 [📂] 按钮打开的文件夹目录",
|
||
"What to put inside the masked area before processing it with Stable Diffusion.": "在使用 Stable Diffusion 處理遮罩區域之前要在遮罩區域內放置什麼",
|
||
"When adding extra network such as Hypernetwork or Lora to prompt, use this multiplier for it.": "當將額外網路（如 Hypernetwork 或 LoRA）添加到提示時，使用此乘數。",
|
||
"When adding to prompt, refer to lora by": "在添加到提示词时，通过以下格式提及lora",
|
||
"When adding to prompt, refer to Lora by": "将扩展模型添加到提示词时，通过以下格式提及lora",
|
||
"(When calculating how many tokens the prompt has, also consider tokens added by enabled styles.)": "(在启用提示词次元长度计数器时同时计入已启用的预设样式中含有的词元数)",
|
||
"when checked, do not output a video": "启用时, 不输出视频",
|
||
"When enabled, a checkpoint will be generated at the specified epoch intervals while training is active. This also controls manual generation using the 'save weights' button while training is active.": "启用本选项后，会在训练过程中以特定间隔 (多少个 Epochs) 生成模型。同时也能使用 “保存权重” 按钮来手动生成模型。",
|
||
"When enabled, a checkpoint will be generated when training completes successfully.": "启用本选项后，会在训练顺利完成后生成一个模型。",
|
||
"When enabled, a checkpoint will be generated when training is canceled by the user.": "本选项启用后，会在训练被用户取消时生成一个模型。",
|
||
"When enabled, a unique snapshot of the diffusion weights will be saved at each specified epoch interval. This uses more HDD space (A LOT), but allows resuming from training, including the optimizer state.": "启用本选项后，训练过程中会在特定时间间隔 (多少个 Epochs) 独立保存 diffusion 权重快照。这会使用非常多的硬盘空间，但可以从训练中恢复包括优化器状态之类的参数。",
|
||
"When enabled, a unique snapshot of the diffusion weights will be saved when training completes. This uses more HDD space, but allows resuming from training including the optimizer state.": "启用本选项后，训练顺利完成后会独立保存一个 diffusion 权重快照。这会使用更多的硬盘空间，但可以从训练中恢复包括优化器状态之类的参数。",
|
||
"When enabled, a unique snapshot of the diffusion weights will be saved when training is canceled. This uses more HDD space, but allows resuming from training including the optimizer state.": "启用本选项后，训练被手动取消时会独立保存一个 diffusion 权重快照。这会使用更多的硬盘空间，但可以从训练中恢复包括优化器状态之类的参数。",
|
||
"When enabled, checkpoints will be saved to a subdirectory in the selected checkpoints folder.": "启用本选项时，模型会保存到指定的模型保存子目录。",
|
||
"When enabled, tags after the first ',' in a prompt will be randomly ordered, which can potentially improve training.": "启用后，在提示词中第一个\", \"之后的标签将随机打乱，也许能改善训练效果。",
|
||
"when enabled, will re-extract video frames each run. When using video_input mode, the run will be instructed to write video frames to the drive. If you’ve already populated the frames needed, uncheck this box to skip past redundant extraction, and immediately start the render. If you have not extracted frames, you must run at least once with this box checked to write the necessary frames.": "启用时，将在每次运行时重新提取视频帧。使用 视频输入 模式时，运行程序将视频帧写入驱动器。如果已经填充了所需的帧，请取消选中此框以跳过多余的提取，然后立即开始渲染。如果尚未提取帧，则必须在选中此框的情况下至少运行一次，以写入必要的帧。",
|
||
"(when generating captions using postprocessing; Ignore = use generated; Keep = use original; Prepend/Append = combine both)": "(使用后期处理生成标签时的行为; 忽略 = 启用生成; 保留 = 使用原有; 添加到开头/追加至末尾 = 结合两者)",
|
||
"(when inpainting, overlay the original image over the areas that weren't inpainted.)": "(当使用局部重绘时, 将原图覆盖到未选中重绘的区域)",
|
||
"When loading models attempt stream loading optimized for slow or network storage": "为低速硬盘或网络存储使用流式模型加载优化",
|
||
"When loading models attempt to reuse previous model dictionary": "加载模型时尝试复用上一模型的字典",
|
||
"When 'Pause After N Epochs' is greater than 0, this is the amount of time, in seconds, that training will be paused for": "当 \"完成 N Epochs 后暂停\" 选项设置大于 0 时，每次暂停的时间 (单位: 秒)。",
|
||
"When performing the backwards pass, gradients will be set to none, instead of creating a new empty tensor. This will slightly improve VRAM.": "在执行反向传播时，梯度会设置为无，并不会创建一个新的空 tensor 。可略微改善显存用量。",
|
||
"(when reading generation parameters from text into UI)": "(适用于从文本中读取生成参数并应用到用户界面时)",
|
||
"(when reading generation parameters from text into UI))": "(适用于从文本中读取生成参数并应用到用户界面时)",
|
||
"When reading generation parameters from text into UI (from PNG info or pasted text), do not change the selected model/checkpoint.": "從文本讀取生成參數到使用者介面（從 PNG 圖片資訊或粘貼文本）時，不要更改選定的模型權重存檔點",
|
||
"When searched": "检索时",
|
||
"(\"When searched\" option will only show the item when the search string has 4 characters or more)": "(\"检索时\" 选项只有当搜索字符串有4个或更多字符时, 才会显示隐藏栏目)",
|
||
"when this box is checked, and FFMPEG mp4 is selected as the output format, an audio file will be multiplexed with the video.": "选中此框并以 FFMPEG mp4 为输出格式时, 音频文件将与视频复用",
|
||
"When this box is checked latents will be cached. Caching latents will use more VRAM, but improve training speed.": "启用本选项时，将缓存潜变量 。缓存的潜变量会占用更多显存，但能提高训练速度。",
|
||
"(When using controlnet together, you can put in large values (even 1.0 is possible).)": "（当使用 ControlNet 进行配合时，你可以尝试设置更大的值（甚至1.0都可以）。）",
|
||
"When using [filewords], this is the class identifier to use/find in existing prompts. Should be a single word.": "使用 [filewords] 时，这是在现有提示词中使用或查找的类别标识符。应是单词。",
|
||
"When using [filewords], this is the class to use when building prompts.": "使用 [filewords] 時，構建提示時使用的類別(正則)。",
|
||
"When using [filewords], this is the instance identifier that is unique to your subject. Should be a single word.": "使用 [filewords] 时，这是主题独有的实例标识符。应是单词。",
|
||
"When using [filewords], this is the subject to use when building prompts.": "使用 [filewords] 時，構建提示時使用的主題。",
|
||
"(when using Interrupt button, if generating more than one image, stop after the generation of an image has finished, instead of immediately)": "(当使用中断按钮, 且当前生成的不止一张图像时, 将会在完成当前图像生成后停止, 而不是立即停止当前图像的生成)",
|
||
"When using 'Save' button, only save a single selected image": "使用「儲存」按鈕時，只儲存一個選定的圖像",
|
||
"When using \"Save\" button, save images to a subdirectory": "使用「儲存」按鈕時，將圖像儲存到子目錄",
|
||
"When you are done click the": "点击 ",
|
||
"When you fill in the Overwrite subject field, that subject will be used to build the dynamic prompt around. It is best, if you set the subject type to match the subject. For example, set it to humanoid if you place a person in the override subject field.": "填写覆盖主题词段将被用来建立动态提示词。最好把主题类型设置为与主题相匹配。例如：如果你在覆盖主题词段中放置一个人，就把它设置为人形。",
|
||
"When you have --xformers in your command line args, you want AnimateDiff to": "启用 xformers 时 AnimateDiff 的行为",
|
||
"Where to insert the trigger keyword": "在何处插入触发关键词",
|
||
"Where to save Controlnet data?": "在哪保存 Controlnet 数据？",
|
||
"Whether to use optical flow to blend frames during cadence (if cadence more than 1)": "在生成间隔期间，使用光流法渲染帧（即使间隔大于1）",
|
||
"Which algorithm to use to produce the image": "使用哪種演算法生成圖像",
|
||
"whimsical": "whimsical (奇幻)",
|
||
"White is Opaque": "白色不透明",
|
||
"Whitelist": "白名單",
|
||
"Whole picture": "全圖",
|
||
"wide": "wide (宽图)",
|
||
"width": "寬度",
|
||
"Width": "寬度",
|
||
"Width/height limit for the above option, in pixels": "解析度寬高上限（px）",
|
||
"[wiki]": null,
|
||
"wiki": null,
|
||
"Wildcard folder exclusion list": "通配符文件夹排除列表",
|
||
"Wildcards": "萬用字元",
|
||
"Wildcards can be used and the joiner can also be specified:": "可以用萬用字元，也可以指定拼接符",
|
||
"Wildcards file": "萬用字元檔案",
|
||
"Wildcards Manager": "萬用字元管理器",
|
||
"(will append after comma if the above is enabled)": "(如启用了上方选项，则在逗号后追加)",
|
||
"(Will append any content type and sub folders to the custom path.)": "(会将所有内容类型和子文件夹附加到自定义路径)",
|
||
"Will be added to negative prompts": "会被添加到反向提示词中",
|
||
"Will be added to prompt along with Lora": "將與 Lora 一同添加到提示中",
|
||
"will do nothing!": "将不生效!",
|
||
"will ignore all motion parameters and attempt to reference a video loaded into the runtime, specified by the video_init_path. Max_frames is ignored during video_input mode, and instead, follows the number of frames pulled from the video’s length. Resume_from_timestring is NOT available with Video_Input mode.": "将忽略所有的运动参数，并试图引用加载到运行环境的视频，由视频初始化路径指定。在视频输入模式下，最大帧数会被忽略，而是遵循从视频长度中提取的帧数。从时间字符串恢复选项在视频输入模式下不可用。",
|
||
"(will keep models other than the currently used one in RAM rather than VRAM)": "(在内存而不是显存中保留除当前使用模型以外的其他模型)",
|
||
"will output a greyscale depth map image alongside the output images.": "将与输出图像一起输出灰度深度图图像。",
|
||
"will then become available.": "目錄內的文字檔案將可以被讀取。",
|
||
"Will upscale the image by the selected scale factor; use width and height sliders to set tile size": "將會通過所選擇的縮放因子將圖像放大；使用寬度和高度滑塊設定磚大小",
|
||
"Will upscale the image to twice the dimensions; use width and height sliders to set tile size": "将图像放大到两倍尺寸； 使用宽度和高度滑块设置分块尺寸(tile size)",
|
||
"(will use a third-party model on generation result to reconstruct faces)": "(使用第三方模型对生成图像的人脸进行修复)",
|
||
"(Will use & prefer the native activation keywords settable in the extra networks UI. Other functionality requires the": "(使用并优先使用在扩展网络 UI 中设置的本地激活关键词。其他功能需要安装 ",
|
||
"(WIP, expect some bugs)": "(未完成, 存在一定的问题)",
|
||
"With confidence": "输出置信度权重",
|
||
"With img2img, do exactly the amount of steps the slider specifies.": "图生图时，准确执行滑块指定的迭代步数",
|
||
"With img2img, fill image's transparent parts with this color.": "在 img2img 中，以此顏色填滿圖片的透明部分。",
|
||
"With img2img, fill transparent parts of the input image with this color.": "图生图时, 用本选项设置的颜色填充到输入图像的透明部分",
|
||
"With Workflow mode, you turn off the automatic generation of new prompts on ‘generate’, and it will use the Workflow prompt field instead. So you can work and finetune any fun prompts without turning of the script.": "在工作流模式下，关闭了 \"生成 \"时自动生成新提示词的功能，它会使用工作流提示词作为代替。因此可以在不打开脚本的情况下工作和对有趣的提示词进行微调。",
|
||
"🧙 Wizard": "🧙 向导",
|
||
"Word delimiters when editing the prompt with Ctrl+up/down": "可以通过 Ctrl+Up/Down 编辑提示词权重的 \"提示词分隔符类型\"",
|
||
"word masks": " 提示词蒙版 ",
|
||
"words in here will be added to the start of all positive prompts": "这里的提示词将被添加到所有正向提示词的开头",
|
||
"Worker Name": "节点名称",
|
||
"Workflow": "工作流",
|
||
"Workflow assist": "工作流协助",
|
||
"Workflow assist, suggestions by redditor Woisek.": "工作流协助，由 redditor: Woisek 提出。",
|
||
"Workflow Editor": "工作流编辑器",
|
||
"Workflow mode, turns off prompt generation and uses below Workflow prompt instead.": "工作流模式：关闭提示词生成，使用以下的工作流提示词代替。",
|
||
"Workflow prompt": "工作流提示词",
|
||
"Workflows": "工作流",
|
||
"*Work In Progress*. All params below are going to be keyframable at some point. If you want to speedup the integration, join Deforum's development. 😉": "*正在开发*. 下面的所有参数在某些点是关键的。如果你想加快集成，请加入 Deforum 的开发。😉",
|
||
"wrap": "包裹",
|
||
"Write all generated prompts to a file": "將所有產生的提示詞寫入檔案",
|
||
"Write image to a directory (default - log/images) and generation parameters into csv file.": "將圖像寫入目錄（預設 — log/images）並將生成參數寫入CSV表格檔案",
|
||
"Write infotext to metadata of the generated image": "写入生成信息到生成图像的元数据中",
|
||
"write merged model ID to": "将融合模型 ID 写入到",
|
||
"Write prompts to file: Create a new .txt file for every batch containing the prompt template as well as the generated prompts.": "將提示寫入文件：為每個批次創建一個新的 .txt 文件，其中包含提示範本和產生的提示詞。",
|
||
"Write weights to tags files": "写入权重到标签文件中",
|
||
"X center axis for 2D angle/zoom": "用于 2D 角度/缩放 的 X 轴中心",
|
||
"x center axis for 2D angle/zoom *only*": "2D 旋转/缩放中 X 轴的中心点",
|
||
"xmenber": "X 值",
|
||
"X panning": "沿 X 軸滾動",
|
||
"xtype": "X 类型",
|
||
"X type": "X 軸類型",
|
||
"X Types": "X 轴类型",
|
||
"X values": "X 軸值",
|
||
"X Values": "X 轴值",
|
||
"X/Y plot": "X/Y 图表",
|
||
"X/Y/Z plot": "X/Y/Z 圖表",
|
||
"XYZ plot": "XYZ 图",
|
||
"XYZ Plot": "XYZ 图",
|
||
"XYZ plot settings": "XYZ 图设置",
|
||
"Y center axis for 2D angle/zoom": "用于 2D 角度/缩放的 Y 轴中心",
|
||
"y center axis for 2D angle/zoom *only*": "2D 旋转/缩放中 Y 轴中心点",
|
||
"Yellow | Blue": "黄色 | 蓝色",
|
||
"Yes": "是",
|
||
"ymenber": "Y 值",
|
||
"You are using": "你正在使用 ",
|
||
"You can also choose the prompt seperator mode for use with Latent Couple extension": "可以选择提示词分隔模式来使用 Latent Couple 插件",
|
||
". You can also join this": ". 你同样可以加入这个",
|
||
"(you can also manually enter any of themes from the": "(你也可以手动输入任何 HF 主题空间名，参考",
|
||
"You can change the maximum execution time, by default it’s 30seconds.": "你可以调节最大执行时间，默认 30 秒。",
|
||
"You can choose a certain subject type, if you want to generate something more specific. It has the following types:": "需要生成更具体的图像, 可以选择主题类型。有以下几种：",
|
||
"(You can create your own API key in your": "(可自行创建个人 API 密钥, 在 ",
|
||
"You can enhance semantic segmentation for control_v11p_sd15_seg from lllyasviel. Non-semantic segmentation for Edit-Anything will be supported when they convert their models to lllyasviel format.": "你可以使用 lllyasviel 的 control_v11p_sd15_seg 模型进行语义分割。当模型转换为 lllyasviel 格式时，将还将支持Edit-Anything 的非语义分割。",
|
||
"You can enhance semantic segmentation for control_v11p_sd15_seg from lllyasviel. You can also utilize": "可以使用 lllyasviel 的 control_v11p_sd15_seg 模型强化语义分割功能。也可以使用 ",
|
||
"You can generate image layout either in single image or in batch. Since there might be A LOT of outputs, there is no gallery for preview. You need to go to the output folder for either single image or batch process.": "你可以生成单张或批量的图像分布。由于可能有大量图片输出，所以无法预览。你需要进入输出文件夹，查看和进行后续操作。",
|
||
"You can mask images by their categories via semantic segmentation. Please enter category ids (integers), separated by": "可通过语义分割将图像分类屏蔽。请输入类别ID (整数) , 以",
|
||
"You can mask images by their categories via semantic segmentation. Please enter category ids (integers), separated by +. Visit here for ade20k and here for coco to get category->id map. Note that coco jumps some numbers, so the actual ID is line_number - 21.": "你可以通过语义分割模型按类别创建蒙版。请输入类别 ID（整数），用+分隔。可以访问 [这里] 获取 ade20k 的分类列表，或者 [这里] 获取 coco 的分类列表。注意，coco 会略过一些数字，所以实际的 ID 是列表中编号 -21。",
|
||
"You can now start generating images accelerated by TRT. If you need to create more Engines, go to the TensorRT tab.": "现在开始就可以通过 TRT 加速生成图像。如果需要创建更多的引擎，可以回到 TensorRT 选项卡继续创建。",
|
||
"You can put any image or images or video you like in the background.": "你可以任何你喜欢的图像或者视频放在背景中。",
|
||
"You can put comma seperated values here, those will be ignored from any list processing. For example, adding \"\"film grain, sepia\"\", will make these values not appear during generation.": "可以填入用逗号隔开的提示词，这些提示词包含的值将会在所有列表处理中被忽略。例如，添加 “”film grain, sepia“” ，将会使得这些提示词包含的值在生成时不出现。",
|
||
"(you can set per-model VAE either by editing user metadata for checkpoints, or by making the VAE have same name as checkpoint)": "(可通过编辑大模型的用户元数据或使 VAE 与大模型同名来逐个设置模型使用的 VAE)",
|
||
"You can specify in this field -> [Ebsynth Utility]->[configuration]->[stage 8]->[Background source]": "你可以在这里设置 -> [Ebsynth Utility]->[插件配置]->[步骤 8]->[背景源]",
|
||
"You can specify \"path_to_project_dir/inv/crossfade_tmp\".": "可以将其设置为“你的工程目录/inv/crossfade_tmp”。",
|
||
"You can stop the algorithm at any time": "你可以在任意时间停止图像增强算法",
|
||
"You can toggle the separator mode. Standardly this is a comma, but you can choose an AND or a BREAK.": "可以切换提示词分隔符。标准设置应该为逗号，但现在可以选择 AND 或者 BREAK 。",
|
||
"You can try it by own, to dig more deeper into Abyss ...": "可自行探索，以窥深渊...",
|
||
"You can turn it off and maybe add your own in the prefix or suffix prompt fields": "可以关闭本选项，然后可以在前缀或后缀提示词段中添加自己想要指定的艺术家。",
|
||
"You can use this as a guided image tool or as a looper depending on your settings in the keyframe images field. \n Set the keyframes and the images that you want to show up. \n Note: the number of frames between each keyframe should be greater than the tweening frames.": "根据关键帧图像字段中的设置，可以将其用作引导图像工具或循环器。\n设置要显示的关键帧和图像。\n注意：每个关键帧之间的帧数应大于中间帧。",
|
||
"You can use this as a guided image tool or as a looper depending on your settings in the keyframe images field. \n Set the keyframes and the images that you want to show up. \n Note: the number of frames between each keyframe should be greater than the tweening frames.": "根据关键帧图像字段中的设置，可以将其用作引导图像工具或循环器。\n设置要显示的关键帧和图像。\n注意：每个关键帧之间的帧数应大于中间帧。",
|
||
"You can use this as a guided image tool or as a looper depending on your settings in the keyframe images field. \n Set the keyframes and the images that you want to show up. \n Note: the number of frames between each keyframe should be greater than the tweening frames.": "可以将其作为引导图像工具或循环工具来使用，具体取决于您在关键帧图像字段的设置。\n 设置想要展示的关键帧和图像。\n 注意：每个关键帧之间的帧数应大于过渡帧。",
|
||
"You DID NOT load any model!": "你还没有加载任何模型！",
|
||
"You don't need a mask to composite video. But, Mask types can control the way that video is composited with the previous image each frame.": "合成视频不需要蒙版。但蒙版类型可以控制视频与上一帧图像合成的方式。",
|
||
"You may configurate automatic sam generation. ": "你可以配置自动 SAM 的参数。",
|
||
"You may configurate automatic sam generation. See": "可以配置以下项目来自动 SAM 。查看",
|
||
"You may configurate the following items and generate masked image for all images under a directory. This mode is designed for generating LoRA/LyCORIS training set.": "配置以下项目，为目录下所有图像生成蒙版。该模式用于生成 LoRA / LyCORIS 训练集。",
|
||
"You must enter text prompts to enable groundingdino. Otherwise this extension will fall back to point prompts only.": "必须输入文本提示词才能启用 GroundingDINO，否则将仅使用标记点。",
|
||
"You probably want this to be 'fp16'.": "你可能想要设置为半精度 (fp16)。",
|
||
"Your Civitai API Key": "Civitai API 密钥",
|
||
"Your Civitai Link Key": "Civitai Link 密钥",
|
||
"Y panning": "沿 Y 軸滾動",
|
||
"ytype": "Y 类型",
|
||
"Y type": "Y 軸類型",
|
||
"Y Types": "Y 轴类型",
|
||
"Y values": "Y 軸值",
|
||
"Y Values": "Y 轴值",
|
||
"z-a": "字母順序：從z到a",
|
||
"Zentangle": "Zentangle (禅绕画)",
|
||
"zeros": "空",
|
||
"zeros will not add any new pixel information": "空模式下不会添加任何新的像素信息",
|
||
"Zero Terminal SNR": "零终信噪比 (Zero Terminal-SNR)",
|
||
"Zip": "打包下载",
|
||
"ZIP Code": "邮政编码",
|
||
"ZoeDepth was not trained on panoramic images. It doesn't know anything about panoramas or spherical projection. Here, we just treat the estimated depth as radius and some projection errors are expected. Nonetheless, ZoeDepth still works surprisingly well on 360 reconstruction.": "ZoeDepth 不是基于全景图像上训练的。它无法识别全景图或球形投影的特征。在这个选项卡，它仅把估计的深度当作半径，所以会产生一些预料中的投影误差。尽管如此，ZoeDepth 在 360° 重建模型上仍有令人惊讶的效果。",
|
||
"ZoeDepth was not trained on panoramic images. It doesn’t know anything about panoramas or spherical projection. Here, we just treat the estimated depth as radius and some projection errors are expected. Nonetheless, ZoeDepth still works surprisingly well on 360 reconstruction.": "ZoeDepth 不是基于全景图像上训练的。它无法识别全景图或球形投影的特征。在这个选项卡，它仅把估计的深度当作半径，所以会产生一些预料中的投影误差。尽管如此，ZoeDepth 在 360° 重建模型上仍有令人惊讶的效果。",
|
||
"Zoom": "缩放",
|
||
"- Zoom canvas": " - 縮放畫布",
|
||
"Zoom canvas": "画布缩放",
|
||
"Zoom in masked area": "缩放遮罩区域",
|
||
"Z type": "Z 軸類型",
|
||
"Z values": "Z 軸值",
|
||
"清空正面提示词": "清空正向提示词",
|
||
"清空负面提示词": "清空反向提示词",
|
||
"-": "-",
|
||
"Lora": "LoRA",
|
||
"txt2img_extra_sort_order": "文字轉圖片額外排序順序",
|
||
"⇅": "⇅",
|
||
"replace preview": "取代預覽",
|
||
"resize: from": "調整大小: 來源",
|
||
"512x512": "512x512",
|
||
"1024x1024": "1024x1024",
|
||
"Hires prompt": "高解析度提示詞",
|
||
"Hires negative prompt": "高解析度反向提示詞",
|
||
"Refiner": "精炼（Refiner）",
|
||
"img2img_extra_sort_order": "圖片轉圖片額外排序順序",
|
||
"R": "R",
|
||
"S": "S",
|
||
"F": "F",
|
||
"Unused": "未使用",
|
||
"Lanczos": "Lanczos",
|
||
"Nearest": "最鄰近整數縮放（Nearest）",
|
||
"ESRGAN_4x": "ESRGAN_4x (寫實 锐化)",
|
||
"LDSR": "LDSR",
|
||
"R-ESRGAN 4x+": "R-ESRGAN 4x+ (通用 锐度最高，细节更多)",
|
||
"R-ESRGAN 4x+ Anime6B": "R-ESRGAN 4x+ Anime6B (2D 轻微的羽化/模糊处理)",
|
||
"ScuNET GAN": "ScuNET GAN",
|
||
"ScuNET PSNR": "ScuNET PSNR",
|
||
"SwinIR 4x": "SwinIR 4x",
|
||
"B": null,
|
||
"C": "C",
|
||
"API": "API",
|
||
"VAE": "VAE",
|
||
"R-ESRGAN General 4xV3": "R-ESRGAN General 4xV3 (细节上更倾向于4X+ 模糊程度上也比Anime6B大一点)",
|
||
"R-ESRGAN General WDN 4xV3": "R-ESRGAN General WDN 4xV3 (2D 适用于厚涂插画)",
|
||
"R-ESRGAN AnimeVideo": "R-ESRGAN AnimeVideo (2D 针对视频放大处理，模糊程度更高)",
|
||
"R-ESRGAN 2x+": "R-ESRGAN 2x+",
|
||
"CodeFormer": "CodeFormer 更激进",
|
||
"GFPGAN": "GFPGAN 更还原",
|
||
"SD Unet": "SD Unet",
|
||
"(ignore last layers of CLIP nrtwork; 1 ignores none, 2 ignores one layer)": "(ignore last layers of CLIP nrtwork; 1 ignores none, 2 ignores one layer)",
|
||
"GPU": "GPU",
|
||
"CPU": "CPU",
|
||
"NV": "NV",
|
||
"RGB": "RGB",
|
||
"TAESD": "TAESD",
|
||
"PR": "PR",
|
||
"deepbooru: escape (\\) brackets": "deepbooru: 转义 (\\) 括号",
|
||
"SD1": "SD1",
|
||
"SD2": "SD2",
|
||
"SDXL": "SDXL",
|
||
".)": ".)",
|
||
"sd_model_checkpoint": "sd_model_checkpoint",
|
||
"checkboxes": "checkboxes",
|
||
"cfg": "cfg",
|
||
"batch": "batch",
|
||
"jpeg": "jpeg",
|
||
"png": "png",
|
||
"webp": "webp",
|
||
"Approx NN": "Approx NN",
|
||
"Approx cheap": "Approx cheap",
|
||
"DPM++ 2M Karras": "DPM++ 2M Karras（推，20步，快好收,Forge）",
|
||
"DPM++ SDE Karras": "DPM++ SDE Karras（中，20+步，慢好不收）",
|
||
"DPM++ 2M SDE Exponential": "DPM++ 2M SDE Exponential（中，柔少）",
|
||
"DPM++ 2M SDE Karras": "DPM++ 2M SDE Karras（可，30步，Fooocus）",
|
||
"Euler a": null,
|
||
"Euler": null,
|
||
"LMS": "LMS（不）",
|
||
"Heun": "Heun（不）",
|
||
"DPM2": "DPM2（不）",
|
||
"DPM2 a": "DPM2 a（不）",
|
||
"DPM++ 2S a": "DPM++ 2S a（不）",
|
||
"DPM++ 2M": "DPM++ 2M（不）",
|
||
"DPM++ SDE": "DPM++ SDE（不）",
|
||
"DPM++ 2M SDE": "DPM++ 2M SDE（不）",
|
||
"DPM++ 2M SDE Heun": "DPM++ 2M SDE Heun（不）",
|
||
"DPM++ 2M SDE Heun Karras": "DPM++ 2M SDE Heun Karras（不）",
|
||
"DPM++ 2M SDE Heun Exponential": "DPM++ 2M SDE Heun Exponential（不）",
|
||
"DPM++ 3M SDE": "DPM++ 3M SDE（不）",
|
||
"DPM++ 3M SDE Karras": "DPM++ 3M SDE Karras（可，30步低CFG）",
|
||
"DPM++ 3M SDE Exponential": "DPM++ 3M SDE Exponential（可，40步低CFG）",
|
||
"DPM fast": "DPM fast（不）",
|
||
"DPM adaptive": "DPM adaptive（最慢，自适应，忽略步数）",
|
||
"LMS Karras": "LMS Karras（不）",
|
||
"DPM2 Karras": "DPM2 Karras（不）",
|
||
"DPM2 a Karras": "DPM2 a Karras（不）",
|
||
"DPM++ 2S a Karras": "DPM++ 2S a Karras（不）",
|
||
"Restart": "Restart（推）",
|
||
"DDIM": "DDIM（中，20~40步）",
|
||
"PLMS": "PLMS（不）",
|
||
"UniPC": "UniPC（可，10步，快）",
|
||
"bh1": "bh1",
|
||
"bh2": "bh2",
|
||
"vary_coeff": "vary_coeff",
|
||
"time_uniform": "time_uniform",
|
||
"time_quadratic": "time_quadratic",
|
||
"logSNR": "logSNR",
|
||
"Shift": "Shift",
|
||
"Ctrl": "Ctrl",
|
||
"Alt": "Alt",
|
||
"Use checkbox to enable the extension; it will be enabled or disabled when you click apply button": "勾選要啟用的擴充功能並按下套用以啟用，取消勾選則停用",
|
||
"Use checkbox to mark the extension for update; it will be updated when you click apply button": "勾選要更新的擴充功能並按下套用以更新",
|
||
"ScuNET": "ScuNET",
|
||
"canvas-zoom-and-pan": "canvas-zoom-and-pan",
|
||
"extra-options-section": "extra-options-section",
|
||
"mobile": "mobile",
|
||
"prompt-bracket-checker": "提示括號檢查器",
|
||
"Fusion": "融合",
|
||
"webui": "webui",
|
||
"Github": "Github",
|
||
"Gradio": "Gradio",
|
||
"N/A": "N/A",
|
||
"Hires checkpoint: refresh": "Hires checkpoint: refresh",
|
||
"Checkpoint: refresh": "Checkpoint: refresh",
|
||
"How many batches of images to create (has no impact on generation performance or VRAM usage)": "要產生多少批圖像（對產生效能或 VRAM 使用沒有影響）。",
|
||
"How many image to create in a single batch (increases generation performance at cost of higher VRAM usage)": "在一個批次中產生的圖像數量，增加這個數量可以加快圖像產生速度，但會增加 VRAM 的使用量。",
|
||
"Use following tags to define how filenames for images are chosen: [steps], [cfg], [clip_skip], [batch_number], [generation_number], [prompt_hash], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [model_name], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp], [hasprompt<prompt1|default><prompt2>..]; leave empty for default.": "Use following tags to define how filenames for images are chosen: [steps], [cfg], [clip_skip], [batch_number], [generation_number], [prompt_hash], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [model_name], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp], [hasprompt<prompt1|default><prompt2>..]; leave empty for default.",
|
||
"Use following tags to define how subdirectories for images and grids are chosen: [steps], [cfg], [clip_skip], [batch_number], [generation_number], [prompt_hash], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [model_name], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp], [hasprompt<prompt1|default><prompt2>..]; leave empty for default.": "Use following tags to define how subdirectories for images and grids are chosen: [steps], [cfg], [clip_skip], [batch_number], [generation_number], [prompt_hash], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [model_name], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp], [hasprompt<prompt1|default><prompt2>..]; leave empty for default.",
|
||
"Latent": "潛在變數",
|
||
"Latent (antialiased)": "潛在變數（抗鋸齒）",
|
||
"Latent (bicubic)": "潛在變數（雙立方）",
|
||
"Latent (bicubic antialiased)": "潛在變數（雙立方抗鋸齒）",
|
||
"Latent (nearest)": "潛在變數（最接近）",
|
||
"Latent (nearest-exact)": "潛在變數（最接近精確）",
|
||
"Nothing": "無",
|
||
"Var. seed": "差異隨機種子",
|
||
"Var. strength": "差異強度",
|
||
"Prompt S/R": "提示詞搜索 / 替換",
|
||
"Prompt order": "提示詞順序",
|
||
"Sigma Churn": "希格瑪流失量（Sigma Churn）",
|
||
"Sigma min": "希格瑪最小值（Sigma min）",
|
||
"Sigma max": "希格瑪最大值（Sigma max）",
|
||
"Eta": "Eta",
|
||
"Hires upscaler": "高解析度放大工具",
|
||
"Face restore": "面部修復",
|
||
"Outpainting mk2": "向外繪製第二版",
|
||
"Poor man's outpainting": "效果稍差的向外繪製",
|
||
"SD upscale": "使用 SD 放大",
|
||
"CLIP": "CLIP",
|
||
"DeepBooru": "DeepBooru",
|
||
"Cond. Image Mask Weight": "图像调节屏蔽度",
|
||
"linear": "線性（linear）",
|
||
"relu": "relu",
|
||
"leakyrelu": "leakyrelu",
|
||
"elu": "elu",
|
||
"swish": "swish",
|
||
"tanh": "tanh",
|
||
"sigmoid": "sigmoid",
|
||
"celu": "celu",
|
||
"gelu": "gelu",
|
||
"glu": "glu",
|
||
"hardshrink": "hardshrink",
|
||
"hardsigmoid": "hardsigmoid",
|
||
"hardtanh": "hardtanh",
|
||
"logsigmoid": "logsigmoid",
|
||
"logsoftmax": "logsoftmax",
|
||
"mish": "mish",
|
||
"prelu": "prelu",
|
||
"rrelu": "rrelu",
|
||
"relu6": "relu6",
|
||
"selu": "selu",
|
||
"silu": "silu",
|
||
"softmax": "softmax",
|
||
"softmax2d": "softmax2d",
|
||
"softmin": "softmin",
|
||
"softplus": "softplus",
|
||
"softshrink": "softshrink",
|
||
"softsign": "softsign",
|
||
"tanhshrink": "tanhshrink",
|
||
"KaimingUniform": "Kaiming 均勻",
|
||
"KaimingNormal": "Kaiming 正态",
|
||
"XavierUniform": "Xavier 均勻",
|
||
"XavierNormal": "Xavier 正态",
|
||
"value": "值",
|
||
"norm": "範數",
|
||
"hypernetwork.txt": "hypernetwork.txt",
|
||
"none.txt": "none.txt",
|
||
"style.txt": "style.txt",
|
||
"style_filewords.txt": "style_filewords.txt",
|
||
"subject.txt": "subject.txt",
|
||
"subject_filewords.txt": "subject_filewords.txt",
|
||
"Agent Scheduler": "任務排程代理",
|
||
"Queue task and task history": "Queue task and task history",
|
||
"TemporalKit": "TemporalKit",
|
||
"An all in one solution for adding Temporal Stability to a Stable Diffusion Render via an automatic1111 extension": "An all in one solution for adding Temporal Stability to a Stable Diffusion Render via an automatic1111 extension",
|
||
"ua_UA Localization": "烏克蘭語本地化語言包",
|
||
"Ukrainian localization": "烏克蘭語本地化",
|
||
"Batch Checkpoints and Prompts": "批量檢查點和關鍵字",
|
||
"Test a base prompt with different checkpoints and for the checkpoints specific prompt templates ": "使用不同的檢查點和檢查點特定的提示詞模板測試基本提示詞 ",
|
||
"Kandinsky": "Kandinsky",
|
||
"Adds a script to run Kandinsky 2.X": "Adds a script to run Kandinsky 2.X",
|
||
"Txt/Img to 3D Model": "Txt/Img to 3D Model",
|
||
"An extension integrated OpenAI Shap-E that allow you to generate 3D model from prompt or image": "An extension integrated OpenAI Shap-E that allow you to generate 3D model from prompt or image",
|
||
"sd-webui-openpose-editor": "sd-webui-openpose-editor",
|
||
"Integrated openpose editor for ControlNet. Full hand/face support.": "Integrated openpose editor for ControlNet. Full hand/face support.",
|
||
"sd-webui-segment-anything": "sd-webui-segment-anything",
|
||
"Segment Anything for Stable Diffusion WebUI. Automatically generate high-quality segmentations/masks for images by clicking or text prompting. Aim for connecting WebUI and ControlNet with Segment Anything and GroundingDINO to enhance Stable Diffusion/ControlNet inpainting (both single image and batch process), enhance ControlNet semantic segmentation, automate image matting and create LoRA/LyCORIS training set.": "Segment Anything for Stable Diffusion WebUI. Automatically generate high-quality segmentations/masks for images by clicking or text prompting. Aim for connecting WebUI and ControlNet with Segment Anything and GroundingDINO to enhance Stable Diffusion/ControlNet inpainting (both single image and batch process), enhance ControlNet semantic segmentation, automate image matting and create LoRA/LyCORIS training set.",
|
||
"Stable Diffusion AWS Extension": "Stable Diffusion AWS Extension",
|
||
"Allow user to migrate existing workloads including ckpt merge, model training, model inferencing onto AWS": "Allow user to migrate existing workloads including ckpt merge, model training, model inferencing onto AWS",
|
||
"Aesthetic Gradients": "美學梯度",
|
||
"Allows training an embedding from one or few pictures, specifically meant for applying styles. Also, allows use of these specific embeddings to generated images.": "允許從一張或多張圖像中訓練一個嵌入（embedding），專門用於套用風格。同時，也允許使用這些特定的嵌入來產生圖像。",
|
||
"Dreambooth training based on Shivam Shiaro's repo, optimized for lower-VRAM GPUs.": "基於 Shivam Shiaro 的代碼移植的 Dreambooth 訓練，為低 VRAM 顯示卡做了優化",
|
||
"training-picker": "训练图挑选器",
|
||
"Adds a tab to the webui that allows the user to automatically extract keyframes from video, and manually extract 512x512 crops of those frames for use in model training.": "向 webui 加入一個頁籤，允許用戶自動從影片中提取關鍵幀，並手動裁剪 512x512 大小以用於模型訓練",
|
||
"Feature-rich UI tab that allows image viewing, search-filtering and editing.": "功能豐富的用戶介面標籤，允許查看圖像、搜尋過濾和編輯。",
|
||
"DreamArtist": "夢想家（DreamArtist）",
|
||
"Towards Controllable One-Shot Text-to-Image Generation via Contrastive Prompt-Tuning.": "通過對比調整提示詞，實現可控的一次性文字文件到圖像生成",
|
||
"Hypernetwork-Monkeypatch-Extension": "Hypernetwork-Monkeypatch-擴充套件",
|
||
"Extension that provides additional training features for hypernetwork training. Also supports using multiple hypernetworks for inference.": "提供超網絡訓練的額外訓練功能的擴充套件。也支援同時使用多個超網絡進行推論。",
|
||
"Custom Diffusion": "自訂擴散",
|
||
"Custom Diffusion is, in short, finetuning-lite with TI, instead of tuning the whole model. Similar speed and memory requirements to TI and supposedly gives better results in less steps.": "簡而言之，自訂擴散是用 TI 的微調代替整個模型的微調。速度和記憶體需求類似 TI，並且在較少步驟內獲得更好的結果。",
|
||
"Smart Process": "智慧預處理",
|
||
"Smart pre-process including auto subject identification, caption subject swapping, and upscaling/facial restoration.": "智慧預處理，包括自動識別主體、切換描述文字主體和放大／面部恢復",
|
||
"Embeddings editor": "多個嵌入編輯器",
|
||
"Allows you to manually edit textual inversion embeddings using sliders.": "讓你可以手動用滑桿編輯風格遷移多個嵌入的參數",
|
||
"embedding-inspector": "嵌入檢查器",
|
||
"Inspect any token(a word) or Textual-Inversion embeddings and find out which embeddings are similar. You can mix, modify, or create the embeddings in seconds.": "檢查任何標記（一個單詞）或文本反轉嵌入並找出相似的嵌入。您可以在幾秒鐘內混合，修改或創建嵌入。",
|
||
"Merge Board": "合併面板",
|
||
"Multiple lane merge support(up to 10). Save and Load your merging combination as Recipes, which is simple text.": "支援多條道路合併(多達10條)，可以將合併組合儲存為「食譜」，食譜是一個簡單的文字檔案。",
|
||
"Convert models to fp16/bf16 no-ema/ema-only safetensors. Convert/copy/delete any parts of model: unet, text encoder(clip), vae.": "將模型轉換為 fp16/bf16 no-ema/ema-only safetensors。轉換/複製/刪除模型的任何部分：unet，文字編碼器（剪貼），vae。",
|
||
"Kohya-ss Additional Networks": "Kohya-ss 附加網路",
|
||
"Allows the Web UI to use LoRAs (1.X and 2.X) to generate images. Also allows editing .safetensors networks prompt metadata.": "允許使用者介面使用 LoRAs（1.X 和 2.X）產生圖像。同時，還允許編輯 .safetensors 網路提示詞中繼資料。",
|
||
"Merge models with separate rate for each 25 U-Net block (input, middle, output).": "合併模型，每 25 個 U-Net 塊（輸入、中間、輸出）有獨立的比率。",
|
||
"Embedding Merge": "嵌入合併",
|
||
"Merging Textual Inversion embeddings at runtime from string literals. Phrases and weight values also supported.": "在運行時從字符串文字中合併文本反轉嵌入。也支援短語和權重值。",
|
||
"Merge and run without saving to drive. Sequential XY merge generations; extract and merge loras, bind loras to ckpt, merge block weights, and more.": "無需儲存到硬碟合併並執行。按順序進行 XY 合併；提取並合併 LoRAs，將 LoRAs 綁定到模型權重存檔點，合併區塊權重以及更多。",
|
||
"Applies LoRA strength; block by block on the fly. Includes presets, weight analysis, randomization, XY plot.": "在執行時逐塊的套用 LoRA 強度。包括預設值、權重分析、隨機化以及 XY 圖。",
|
||
"Provides an interface to browse created images in the web browser.": "在網頁瀏覽器裡提供一個瀏覽已產生的圖像使用者介面",
|
||
"Infinite image browsing": "無限圖像瀏覽",
|
||
"A fast image browser that allows browsing all images without paging, and supports joint search using image parameters, with a layout similar to VS Code.": "A fast image browser that allows browsing all images without paging, and supports joint search using image parameters, with a layout similar to VS Code.",
|
||
"Inspiration": "靈感",
|
||
"Randomly display the pictures of the artist's or artistic genres typical style, more pictures of this artist or genre is displayed after selecting. So you don't have to worry about how hard it is to choose the right style of art when you create.": "隨機顯示一位藝術家或某藝術流派的圖像，選擇後會顯示更多該藝術家或藝術流派的圖像。所以你不用擔心在創作時難以選擇出想要的藝術風格",
|
||
"Artists to study": "藝術家圖庫",
|
||
"Shows a gallery of generated pictures by artists separated into categories.": "將藝術家按類別劃分，並顯示其產生出來的圖像",
|
||
"Prompt Gallery": "提示詞畫廊",
|
||
"Build a yaml file filled with prompts of your character, hit generate, and quickly preview them by their word attributes and modifiers.": "建立一個使用您的角色提示的 yaml 檔，點擊產生，並快速通過其字屬性和修飾符預覽它們。",
|
||
"Infinity Grid Generator": "無限網格產生器",
|
||
"Build a yaml file with your chosen parameters, and generate infinite-dimensional grids. Built-in ability to add description text to fields. See readme for usage details.": "建立一個使用選定的參數的 yaml 檔，並產生無限維的網格。內建能力將描述文字添加到字段中。有關用法細節，請參閱 readme。",
|
||
"Adds a configurable dropdown to allow you to change UI preset settings in the txt2img and img2img tabs.": "在文生圖和圖生圖頁面中添加可設定下拉菜單，以允許您更改 UI 預設設定。",
|
||
"Preset Utilities": "預設工具",
|
||
"Preset utility tool for ui. Offers compatibility with custom scripts. (to a limit)": "預設工具，用於 ui。提供與自定義腳本的兼容性。（有限制）",
|
||
"openOutpaint extension": "openOutpaint 擴展",
|
||
"A tab with the full openOutpaint UI. Run with the --api flag.": "具有完整 openOutpaint UI 的選項卡。使用 --api 標誌運行。",
|
||
"quick-css": "快速 CSS",
|
||
"Extension for quickly selecting and applying custom.css files, for customizing look and placement of elements in ui.": "用於快速選擇和應用 custom.css 文件的擴展，以自定義 ui 中元素的外觀和位置。",
|
||
"Aspect Ratio selector": "長寬比選擇器",
|
||
"Adds image aspect ratio selector buttons.": "添加圖像長寬比選擇按鈕。",
|
||
"Nevysha's Cozy Nest": "Nevysha's Cozy Nest",
|
||
"Extension for an improved UI/UX. Find your cozy spot on Auto1111's webui!.": "Extension for an improved UI/UX. Find your cozy spot on Auto1111's webui!.",
|
||
"Catppuccin Theme": "Catppuccin 主題",
|
||
"Adds various custom themes": "添加多種自定義主題。",
|
||
"Bilingual translation, no need to worry about how to find the original button. Compatible with language pack extensions, no need to re-import.": "雙語翻譯，無需擔心如何尋找原文按鈕。與語言包擴充功能相容，無需重新導入。",
|
||
"Dynamic Prompts": "動態提示詞",
|
||
"Implements an expressive template language for random or combinatorial prompt generation along with features to support deep wildcard directory structures.": "為隨機或組合式提示詞的生成實現了一種表達性模板語言，並支持深層目錄結構中的萬用字元",
|
||
"Unprompted": "非文本（代碼化）提示詞",
|
||
"Allows you to include various shortcodes in your prompts. You can pull text from files, set up your own variables, process text through conditional functions, and so much more - it's like wildcards on steroids. It now includes integrations like hard-prompts made easy, ControlNet, txt2img2img and txt2mask.": "允許您在提示詞中包含各種短碼。您可以從文件中提取文本，設定自己的變數，通過條件函數處理文字等 ，就像是在類固醇中的萬用字元。它現在包括了一些整合，如硬提示詞（hard-prompts）、ControlNet、文生圖生圖和文生遮罩。",
|
||
"StylePile": "樣式積累",
|
||
"An easy way to mix and match elements to prompts that affect the style of the result.": "方便地組合不同元素，並影響結果的樣式。",
|
||
"Booru tag autocompletion": "Booru 標記自動補齊",
|
||
"Displays autocompletion hints for tags from image booru boards such as Danbooru. Uses local tag CSV files and includes a config for customization.": "顯示來自圖像板塊（如 Danbooru）的標記自動補齊。使用本地標記CSV 檔案，並包含可用於自定義配置的檔案",
|
||
"novelai-2-local-prompt": "novelai-2-local-prompt",
|
||
"Add a button to convert the prompts used in NovelAI for use in the WebUI. In addition, add a button that allows you to recall a previously used prompt.": "加入一個按鈕以將 NovelAI 中使用的提示詞轉換為在 WebUI 中使用。此外，加入一個按鈕，讓你可以調用以前使用過的提示詞",
|
||
"tokenizer": "標記解析器",
|
||
"Adds a tab that lets you preview how CLIP model would tokenize your text.": "新增一個頁籤讓你能夠預覽 CLIP 模型如何對你的文本進行標記拆分",
|
||
"Randomize": "隨機化",
|
||
"Allows for random parameters during txt2img generation. This script will function with others as well. Original author: https://git.mmaker.moe/mmaker/stable-diffusion-webui-randomize": "允許在文生圖產生過程中使用隨機參數。此指令碼也可以與其他指令碼一起執行。原作者：https://git.mmaker.moe/mmaker/stable-diffusion-webui-randomize",
|
||
"conditioning-highres-fix": "高解析度修復原圖調節",
|
||
"This is Extension for rewriting Inpainting conditioning mask strength value relative to Denoising strength at runtime. This is useful for Inpainting models such as sd-v1-5-inpainting.ckpt": "這是在運行時重新實現的局部重繪圖像調節遮罩強度（相對於重繪強度）的擴充功能。這對於局部重繪專用的模型（例如 sd-v1-5-inpainting.ckpt）很有用",
|
||
"Inserts matching keyword(s) to the prompt automatically. Update this extension to get the latest model+keyword mappings.": "自動將匹配關鍵字插入提示。更新此擴展以獲取最新的「模型+關鍵字」映射。",
|
||
"Prompt Generator": "提示產生器",
|
||
"generate a prompt from a small base prompt using distilgpt2. Adds a tab with additional control of the model.": "使用 distilgpt2 從小基礎提示產生提示。添加一個具有模型額外控制的選項卡。",
|
||
"Promptgen": "提示詞生成器",
|
||
"Use transformers models to generate prompts.": "使用 transformers 模型產生提示詞。",
|
||
"text2prompt": "文生提示詞",
|
||
"Generates anime tags using databases and models for tokenizing.": "使用資料庫和分詞模型產生動漫標籤。",
|
||
"Deforum": "Deforum",
|
||
"The official port of Deforum, an extensive script for 2D and 3D animations, supporting keyframable sequences, dynamic math parameters (even inside the prompts), dynamic masking, depth estimation and warping.": "Deforum 的官方移植，一個用於 2D 和 3D 動畫的擴展指令碼，支持關鍵幀序列、動態數學參數（甚至可用於提示詞內）、動態遮罩、深度預測和變形",
|
||
"Animator": "動畫製作器",
|
||
"A basic img2img script that will dump frames and build a video file. Suitable for creating interesting zoom-in warping movies. This is intended to be a versatile toolset to help you automate some img2img tasks.": "一個簡單的圖生圖腳本，將輸出幀並建立視訊檔案。適合製作有趣的縮放曲折電影。這是一個多用途的工具組，可幫助您自動化一些圖生圖任務。",
|
||
"gif2gif": "GIF生GIF",
|
||
"A script for img2img that extract a gif frame by frame for img2img generation and recombine them back into an animated gif": "圖生圖的腳本，逐幀提取圖生圖以生成 gif，並將它們重新組合成動畫gif",
|
||
"Video Loopback": "Video Loopback",
|
||
"A video2video script that tries to improve on the temporal consistency and flexibility of normal vid2vid.": "一個嘗試改善普通 vid2vid 的時間一致性和靈活性的 video2video 指令碼。",
|
||
"seed travel": "種子變遷",
|
||
"Small script for AUTOMATIC1111/stable-diffusion-webui to create images that exists between seeds.": "一個用於生成不同隨機種子之間的漸變過程的小指令碼",
|
||
"shift-attention": "关注转移",
|
||
"Generate a sequence of images shifting attention in the prompt. This script enables you to give a range to the weight of tokens in a prompt and then generate a sequence of images stepping from the first one to the second.": "根據提示詞產生一系列關注逐漸轉移的圖像。此指令碼使你能夠在提示詞中為標記的權重指定一個範圍，然後產生從一端到另一端的一系列圖像",
|
||
"prompt travel": "提示詞變遷",
|
||
"Extension script for AUTOMATIC1111/stable-diffusion-webui to travel between prompts in latent space.": "一個在潛在變數中對不同提示詞之間進行插值漸變，並生成其漸變過程的擴充功能指令碼",
|
||
"Steps Animation": "步驟動畫",
|
||
"Create animation sequence from denoised intermediate steps.": "從降噪過程中的中間步驟建立動畫序列。",
|
||
"auto-sd-paint-ext": "畫圖工具擴充",
|
||
"Krita Plugin.": "Krita 套件",
|
||
"Batch Face Swap": "批次臉部交換",
|
||
"Automatically detects faces and replaces them.": "自動偵測臉部並進行替換。",
|
||
"Depth Maps, Stereo Image, 3D Mesh and Video generator extension.": "深度圖、立體圖像、3D網格和影片生成器擴展。",
|
||
"multi-subject-render": "多主題繪製",
|
||
"It is a depth aware extension that can help to create multiple complex subjects on a single image. It generates a background, then multiple foreground subjects, cuts their backgrounds after a depth analysis, paste them onto the background and finally does an img2img for a clean finish.": "它是一個深度感知延伸，可以幫助在單張圖像上創建多個復雜主題。它先產生背景，再產生多個前景主題，根據深度分析切割它們的背景，將它們粘貼到背景上，最後進行圖生圖，得到一個乾淨的結果。",
|
||
"depthmap2mask": "深度圖生遮罩",
|
||
"Create masks for img2img based on a depth estimation made by MiDaS.": "根據 MiDaS 的深度估計為圖生圖創建遮罩。",
|
||
"ABG_extension": "ABG_擴展",
|
||
"Automatically remove backgrounds. Uses an onnx model fine-tuned for anime images. Runs on GPU.": "自動刪除背景。使用為動漫圖像微調的 onnx 模型。在 GPU 上運行。",
|
||
"Pixel": "Pixel",
|
||
"Quickly and easily perform downscaling, color palette limiting, and other useful pixel art effects through the extras tab.": "Quickly and easily perform downscaling, color palette limiting, and other useful pixel art effects through the extras tab.",
|
||
"Pixelization": "像素化",
|
||
"Using pre-trained models, produce pixel art out of images in the extras tab.": "使用預先訓練的模型，在附加標籤中將圖像轉換為像素藝術。",
|
||
"haku-img": "HAKU 圖像工具",
|
||
"Image utils extension. Allows blending, layering, hue and color adjustments, blurring and sketch effects, and basic pixelization.": "圖像工具擴充套件。允許混合、分層、色調和顏色調整、模糊和素描效果，以及基本的像素化。",
|
||
"Asymmetric Tiling": "非對稱平舖",
|
||
"An always visible script extension to configure seamless image tiling independently for the X and Y axes.": "一個始終可見的腳本擴充套件，用於分別配置 X 和 Y 軸上的無縫圖像鋪貼。",
|
||
"Applies mirroring and flips to the latent images to produce anything from subtle balanced compositions to perfect reflections": "將圖像的潛在變數狀態進行鏡像和翻轉，以產生從輕度平衡的構圖到完全對稱的任何圖像",
|
||
"Sonar": "聲納",
|
||
"Improve the generated image quality, searches for similar (yet even better!) images in the neighborhood of some known image, focuses on single prompt optimization rather than traveling between multiple prompts.": "提高產生的圖像品質，在某個已知圖像的附近搜索類似（甚至更好！）的圖像，專注於單個提示的優化，而不是在多個提示之間旅行。",
|
||
"Depth Image I/O": "深度影像輸入/輸出",
|
||
"An extension to allow managing custom depth inputs to Stable Diffusion depth2img models.": "一個擴充套件，允許管理自訂深度輸入到 Stable Diffusion depth2img 模型。",
|
||
"Ultimate SD Upscale": "終極 SD 放大",
|
||
"More advanced options for SD Upscale, less artifacts than original using higher denoise ratio (0.3-0.5).": "比 SD 放大的更為進階的選項，使用更高的降噪比率 (0.3-0.5)，比原始的更少的人工假象。",
|
||
"Prompt Fusion": "Prompt Fusion",
|
||
"Adds prompt-travel and shift-attention-like interpolations (see exts), but during/within the sampling steps. Always-on + works w/ existing prompt-editing syntax. Various interpolation modes. See their wiki for more info.": "加入提示旅行和類似位移注意力的插值（請參閱 exts），但在採樣步驟中進行。始終啟用 + 可與現有提示編輯語法一起使用。各種插值模式。有關更多信息，請參閱其 wiki。",
|
||
"Neutral Prompt": "Neutral Prompt",
|
||
"Adds new keywords for manipulating noise blending and prompt interactions. Allows for organizing prompts in a hierarchical manner instead of a flat list.": "Adds new keywords for manipulating noise blending and prompt interactions. Allows for organizing prompts in a hierarchical manner instead of a flat list.",
|
||
"Dynamic Thresholding": "動態閾值",
|
||
"anti-burn": "反燒機",
|
||
"Smoothing generated images by skipping a few very last steps and averaging together some images before them.": "跳過最後幾步並將之前的一些圖像平均在一起，以平滑生成的圖像。",
|
||
"sd-webui-controlnet": "sd-webui-controlnet",
|
||
"WebUI extension for ControlNet. Note: (WIP), so don't expect seed reproducibility - as updates may change things.": "ControlNet 的 WebUI 擴充功能。注意：由於仍在開發中，因此不保證種子的再現性，因為更新可能會更改內容。",
|
||
"Latent Couple": "潛在變數伴侶",
|
||
"An extension of the built-in Composable Diffusion, allows you to determine the region of the latent space that reflects your subprompts. Note: New maintainer, uninstall prev. ext if needed.": "內置 Composable Diffusion 擴充功能，能使您將子提示詞反映在特定的潛在變數空間區域。注意：如有必要，請解除安裝先前的擴充功能。",
|
||
"Composable LoRA": "Composable LoRA",
|
||
"Enables using AND keyword(composable diffusion) to limit LoRAs to subprompts. Useful when paired with Latent Couple extension.": "允許使用 AND 關鍵字（composable diffusion）來限制 LoRA 到子提示詞。當與潛在變數伴侶擴充功能搭配使用時非常有用。",
|
||
"Auto TLS-HTTPS": "自動使用安全性傳輸協定（https）",
|
||
"booru2prompt": "booru轉提示詞",
|
||
"This SD extension allows you to turn posts from various image boorus into stable diffusion prompts. It does so by pulling a list of tags down from their API. You can copy-paste in a link to the post you want yourself, or use the built-in search feature to do it all without leaving SD.": "這個 SD 延伸可以將各種圖像 boorus 的文章轉換為穩定擴散提示。它通過從API下載標籤列表來完成此操作。您可以自行複製粘貼您想要的文章的網址，或使用內置的搜索功能在不離開 SD 的情況下完成所有操作。",
|
||
"Gelbooru Prompt": "Gelbooru 提示",
|
||
"Extension that gets tags for saved gelbooru images in AUTOMATIC1111's Stable Diffusion webui": "擴充功能，可獲取在 AUTOMATIC1111 的 Stable Diffusion webui 中儲存的 Gelbooru 圖像的標籤",
|
||
"e621 Prompt": "e621 Prompt",
|
||
"Request tags of an image from e621 and convert them into a prompt": "Request tags of an image from e621 and convert them into a prompt",
|
||
"NSFW checker": "NSFW 檢查器",
|
||
"Replaces NSFW images with black.": "用黑色替換 NSFW 圖像。",
|
||
"Diffusion Defender": "擴散防御者",
|
||
"Prompt blacklist, find and replace, for semi-private and public instances.": "提示黑名單，查找並替換半私人和公共實例。",
|
||
"DH Patch": "DH 更新檔",
|
||
"Random patches by D8ahazard. Auto-load config YAML files for v2, 2.1 models; patch latent-diffusion to fix attention on 2.1 models (black boxes without no-half), whatever else I come up with.": "D8ahazard 的隨機修補程式。自動加載 v2、2.1 模型的 YAML 配置文件；修補 2.1 模型的潛在變數擴散以修復注意力（沒有 no-half 的黑盒子），以及其他任何我想到的。",
|
||
"Riffusion": "Riffusion",
|
||
"Use Riffusion model to produce music in gradio. To replicate original interpolation technique, input the prompt travel extension output frames into the riffusion tab.": "使用 Riffusion 模型在 gradio 中產生音樂。要重現原始插值技巧，請將提示旅行擴展輸出幀輸入到 Riffusion 頁面中。",
|
||
"Save Intermediate Images": "儲存中間圖像",
|
||
"Save intermediate images during the sampling process. You can also make videos from the intermediate images.": "在採樣過程中儲存中間圖像。您也可以從中間圖像製作影片。",
|
||
"Add the image's number to its picture in the grid.": "將圖像的編號添加到網格中的圖片中。",
|
||
"Multiple Hypernetworks": "多個超網絡",
|
||
"Adds the ability to apply multiple hypernetworks at once. Apply multiple hypernetworks sequentially, with different weights.": "增加同時應用多個超網絡的能力。連續應用多個超網絡，具有不同的權重。",
|
||
"System Info tab for WebUI which shows realtime information of the server. Also supports sending crowdsourced inference data as an option.": "System Info tab for WebUI which shows realtime information of the server. Also supports sending crowdsourced inference data as an option.",
|
||
"This can add multiple pose characters, detect pose from image, save to PNG, and send to controlnet extension.": "可添加多個姿勢角色，從圖像中檢測姿勢，儲存為 PNG 並發送到 ControlNet 擴充功能。",
|
||
"Worker Client for Stable Horde. Generate pictures for other users with your PC. Please see readme for additional instructions.": "Stable Horde 工作端。使用您的 PC 為其他使用者產生圖片。請閱讀說明以獲取其他指示。",
|
||
"Stable Horde Client": "Stable Horde 客戶端",
|
||
"Stable Horde Client. Generate pictures using other user's PC. Useful if u have no GPU.": "Stable Horde 客戶端。使用其他用戶的 PC 產生圖片。如果自己沒有 GPU 的話，這很有用。",
|
||
"Discord Rich Presence": "Discord 豐富存在",
|
||
"Provides connection to Discord RPC, showing a fancy table in the user profile.": "提供與 Discord RPC 的連接，在用戶資料頁面顯示漂亮的表格。",
|
||
"mine-diffusion": "mine-diffusion",
|
||
"This extension converts images into blocks and creates schematics for easy importing into Minecraft using the Litematica mod.": "This extension converts images into blocks and creates schematics for easy importing into Minecraft using the Litematica mod.",
|
||
"Calculates aesthetic score for generated images using CLIP+MLP Aesthetic Score Predictor based on Chad Scorer": "為產生出來的圖像計算其美學分數。基於 Chad Scorer 使用 CLIP+MLP 美學分數預測器",
|
||
"Aesthetic Scorer": "美學評分器",
|
||
"Uses existing CLiP model with an additional small pretrained model to calculate perceived aesthetic score of an image.": "使用現有的 CLiP 模型和額外的小型預訓練模型來計算圖像的感知美學分數。",
|
||
"cafe-aesthetic": "咖啡審美器",
|
||
"Pre-trained model, determines if aesthetic/non-aesthetic, does 5 different style recognition modes, and Waifu confirmation. Also has a tab with Batch processing.": "預先訓練的模型，用於判斷美學/非美學，進行五種不同樣式的識別模式，以及 Waifu 確認。此外還有批次處理的標籤。",
|
||
"Clip Interrogator": "Clip Interrogator",
|
||
"Clip Interrogator by pharmapsychotic ported to an extension. Features a variety of clip models and interrogate settings.": "Clip Interrogator by pharmapsychotic ported to an extension. Features a variety of clip models and interrogate settings.",
|
||
"Generates highlighted sectors of a submitted input image, based on input prompts. Use with tokenizer extension. See the readme for more info.": "根據輸入提示詞產生輸入圖像的突出顯示區域。需與 Tokenizer 擴充功能一起使用。詳細資訊請參閱自述文件。",
|
||
"DAAM": "擴散注意力歸因圖（DAAM）",
|
||
"DAAM stands for Diffusion Attentive Attribution Maps. Enter the attention text (must be a string contained in the prompt) and run. An overlapping image with a heatmap for each attention will be generated along with the original image.": "DAAM 代表擴散注意力歸因圖（Diffusion Attentive Attribution Maps）。輸入注意力文（必須是提示詞中包含的字串）並運行。將生成一張與原始圖像重疊的圖像，每個注意力將附帶一個熱度圖。",
|
||
"Dump U-Net": "Dump U-Net",
|
||
"View different layers, observe U-Net feature maps. Image generation by giving different prompts for each block of the unet: https://note.com/kohya_ss/n/n93b7c01b0547": "View different layers, observe U-Net feature maps. Image generation by giving different prompts for each block of the unet: https://note.com/kohya_ss/n/n93b7c01b0547",
|
||
"posex": "posex",
|
||
"Estimated Image Generator for Pose2Image. This extension allows moving the openpose figure in 3d space.": "Estimated Image Generator for Pose2Image. This extension allows moving the openpose figure in 3d space.",
|
||
"LLuL": "潛空間區域放大",
|
||
"Local Latent Upscaler. Target an area to selectively enhance details.": "潛在變數區域放大。指定一個範圍以選擇性增強細節。",
|
||
"CFG-Schedule-for-Automatic1111-SD": "CFG-Schedule-for-Automatic1111-SD",
|
||
"These scripts allow for dynamic CFG control during generation steps. With the right settings, this could help get the details of high CFG without damaging the generated image even with low denoising in img2img.": "These scripts allow for dynamic CFG control during generation steps. With the right settings, this could help get the details of high CFG without damaging the generated image even with low denoising in img2img.",
|
||
"ebsynth_utility": "ebsynth_utility",
|
||
"Extension for creating videos using img2img and ebsynth. Output edited videos using ebsynth. Works with ControlNet extension.": "Extension for creating videos using img2img and ebsynth. Output edited videos using ebsynth. Works with ControlNet extension.",
|
||
"VRAM Estimator": "VRAM 估量器",
|
||
"Runs txt2img, img2img, highres-fix at increasing dimensions and batch sizes until OOM, and outputs data to graph.": "執行遞增的圖像尺寸與批次數量文生圖、圖生圖以及高解析修復直到將記憶體耗盡，並輸出資料圖表。",
|
||
"TiledDiffusion with Tiled VAE": "TiledDiffusion with Tiled VAE",
|
||
"Seamless large image regional generation and upscaling, along with vram-efficient tiled vae script.": "Seamless large image regional generation and upscaling, along with vram-efficient tiled vae script.",
|
||
"3D Model&Pose Loader": "3D 模型與姿勢載入器",
|
||
"Load your 3D model/animation inside webui, or edit model pose as well, then send screenshot to txt2img or img2img to ControlNet.": "載入你的 3D 模型 / 動畫到網頁使用者介面，或編輯模型姿勢，然後傳送截圖至文生圖或圖生圖的 ControlNet。",
|
||
"Corridor Crawler Outpainting": "Corridor Crawler Outpainting",
|
||
"Generate hallways with the depth-to-image model at 512 resolution. It can be tweaked to work with other models/resolutions.": "使用解析度為 512 的深度圖像模型產生畫廊。它可以調整以適應其他模型 / 解析度。",
|
||
"Panorama Viewer": "全景圖像查看器",
|
||
"Provides a tab to display equirectangular images in interactive 3d-view.": "提供一個分頁以顯示互動式 3D 視圖中的等矩形圖像。",
|
||
"db-storage1111": "資料庫儲存",
|
||
"Enables the storage of pictures and their metadata in a MongoDB database.": "Enables the storage of pictures and their metadata in a MongoDB database.",
|
||
"stable-diffusion-webui-rembg": "stable-diffusion-webui-rembg",
|
||
"Removes backgrounds from pictures.": "從圖片移除背景。",
|
||
"sd-webui-tunnels": "sd-webui-tunnels",
|
||
"Add alternatives to the default tunneling methods. (including cloudflared)": "加入使用預設 tunneling 方法以外的替代方法（包括 cloudflared）",
|
||
"3D Openpose Editor": "3D Openpose Editor",
|
||
"Edit the pose of 3D models in the WebUI, and generate Openpose/Depth/Normal/Canny maps for ControlNet.": "在網頁使用者介面上編輯 3D 模型的姿勢，並為 ControlNet 產生 Openpose/Depth/Normal/Canny 圖。",
|
||
"sd-webui-enable-checker": "sd-webui-enable-checker",
|
||
"Switch background color by clicking the Enable buttons in SD Web UI": "透過在網頁使用者介面中點擊啟用按鈕來切換背景顏色。",
|
||
"stable-diffusion-webui-state": "stable-diffusion-webui-state",
|
||
"Preserves the UI state after reload/restart.": "Preserves the UI state after reload/restart.",
|
||
"text2video": "text2video",
|
||
"Brings a range of true text2video models, such as ModelScope and Videocrafter, into the WebUI.": "Brings a range of true text2video models, such as ModelScope and Videocrafter, into the WebUI.",
|
||
"Easily scale dimensions while retaining the same aspect ratio.": "Easily scale dimensions while retaining the same aspect ratio.",
|
||
"Canvas Zoom": "Canvas Zoom",
|
||
"Added the ability to scale Inpaint, Sketch, and Inpaint Sketch. Adds useful hotkeys": "Added the ability to scale Inpaint, Sketch, and Inpaint Sketch. Adds useful hotkeys",
|
||
"Regional Prompter": "Regional Prompter",
|
||
"Specify different prompts for different regions; an alternative method and potential improvement to latent couple.": "Specify different prompts for different regions; an alternative method and potential improvement to latent couple.",
|
||
"Auto Translate": "自動翻譯",
|
||
"Language extension allows users to write prompts in their native language and automatically translate UI, without the need to manually download configuration files. New plugins can also be translated.": "Language extension allows users to write prompts in their native language and automatically translate UI, without the need to manually download configuration files. New plugins can also be translated.",
|
||
"Allows users to generate images based on prompts written in 50 different languages. It translates the prompts to english from a selected source language before generating the image.": "允許使用者根據用50種不同語言寫成的提示詞來產生圖像。在產生圖像之前，它會將來自所選源語言的提示翻譯成英語。",
|
||
"Abysz LAB": "Abysz LAB",
|
||
"Temporal Coherence Tools": "Temporal Coherence Tools",
|
||
"Allows users to set a global weight for the negative prompt.": "允許使用者設定反向提示詞的全域權重",
|
||
"Discord - Dynamic Rich Presence": "Discord 動態狀態訊息",
|
||
"Will show your current sd model selected. Also showing if you are idle, or generating something - in that case, total image/s being generated.": "在 Discord 動態狀態顯示目前選用的模型名稱。另外也會顯示閒置中或正在產生圖像等訊息。",
|
||
"PBRemTools(Precise background remover tools) is a collection of tools to crop backgrounds from a single picture with high accuracy.": "PBRemTools(Precise background remover tools) is a collection of tools to crop backgrounds from a single picture with high accuracy.",
|
||
"a1111-sd-webui-lycoris": "a1111-sd-webui-lycoris",
|
||
"No longer needed for webui >= 1.5.0, Load lycoris: non-conventional rank adapters; in separate networks gallery tab.": "No longer needed for webui >= 1.5.0, Load lycoris: non-conventional rank adapters; in separate networks gallery tab.",
|
||
"sd-canvas-editor": "sd-canvas-editor",
|
||
"A full capability canvas editor which you can use layer, text, image, elements and so on.": "A full capability canvas editor which you can use layer, text, image, elements and so on.",
|
||
"Infinite Zoom": "無限縮放",
|
||
"allows users to create infinite zoom effect videos using stable diffusion outpainting method.": "使用 stable diffusion 向外繪製建立無限縮放效果影片。",
|
||
"Eye Mask": "Eye Mask",
|
||
"Puts an end to poorly drawn eyes by automatically identifying and redrawing them.": "Puts an end to poorly drawn eyes by automatically identifying and redrawing them.",
|
||
"zh_CN Localization": "簡體中文本地化語言包",
|
||
"Simplified Chinese localization, recommend using with Bilingual Localization.": "簡體中文本地化，推薦搭配雙語翻譯對照擴充功能使用。",
|
||
"zh_TW Localization": "正體中文在地化語言包",
|
||
"Traditional Chinese localization": "正體中文本地化",
|
||
"ko_KR Localization": "韓文在地化語言包",
|
||
"Korean localization": "韓語本地化",
|
||
"th_TH Localization": "泰語本地化語言包",
|
||
"Thai localization": "泰語本地化",
|
||
"es_ES Localization": "西班牙語本地化語言包",
|
||
"Spanish localization": "西班牙語本地化",
|
||
"it_IT Localization": "義大利語本地化語言包",
|
||
"Italian localization": "義大利語本地化",
|
||
"de_DE Localization": "德語本地化語言包",
|
||
"German localization": "德語本地化",
|
||
"ja_JP Localization": "日文本地化語言包",
|
||
"Japanese localization": "日語本地化",
|
||
"pt_BR Localization": "巴西葡萄牙語本地化語言包",
|
||
"Brazillian portuguese localization": "巴西葡萄牙語本地化",
|
||
"tr_TR Localization": "土耳其語本地化語言包",
|
||
"Turkish localization": "土耳其語本地化",
|
||
"no_NO Localization": "挪威語本地化語言包",
|
||
"Norwegian localization": "挪威語本地化",
|
||
"ru_RU Localization": "俄語本地化語言包",
|
||
"Russian localization": "俄語本地化",
|
||
"fi_FI Localization": "芬蘭語本地化語言包",
|
||
"Finnish localization": "芬蘭語本地化",
|
||
"zh_Hans Localization": "簡體中文本地化語言包",
|
||
"Simplified Chinese localization.": "簡體中文本地化。",
|
||
"old localizations": "過時的本地化語言包",
|
||
"Old unmaintained localizations that used to be a part of main repository": "曾經在主分支上但現在不再維護的舊語言包",
|
||
"Model Organizer": "Model Organizer",
|
||
"Allows to store and manage own model collections, add information, notes, previews, download links of model. Easily download from any external direct link or shared file link from Google Drive. Share own models collection with json file or use remote Firestore database to make it available and synced on several devices.": "Allows to store and manage own model collections, add information, notes, previews, download links of model. Easily download from any external direct link or shared file link from Google Drive. Share own models collection with json file or use remote Firestore database to make it available and synced on several devices.",
|
||
"Model Preset Manager": "Model Preset Manager",
|
||
"Lets you create and apply presets per model for all generation data (e.g. prompt, negative prompt, cfg_scale, resolution, sampler, clip skip, steps, etc). Also automatically fetches model trigger words and thumbnails from Civitai.": "Lets you create and apply presets per model for all generation data (e.g. prompt, negative prompt, cfg_scale, resolution, sampler, clip skip, steps, etc). Also automatically fetches model trigger words and thumbnails from Civitai.",
|
||
"SD-CN-Animation": "SD-CN-Animation",
|
||
"Allows users to create video2video and text2video animations using any SD models as a backbone. Please, make sure that 'sd-webui-controlnet' extension is also installed.": "Allows users to create video2video and text2video animations using any SD models as a backbone. Please, make sure that 'sd-webui-controlnet' extension is also installed.",
|
||
"Model toolkit": "Model toolkit",
|
||
"A Multipurpose toolkit for pruning, editing and fixing models.": "A Multipurpose toolkit for pruning, editing and fixing models.",
|
||
"sd-webui-prompt-all-in-one": "sd-webui-prompt-all-in-one",
|
||
"Improve the user experience of the prompt/negative prompt input box. It has a more intuitive and powerful input interface that offers features such as automatic translation, history records, and favorites.": "Improve the user experience of the prompt/negative prompt input box. It has a more intuitive and powerful input interface that offers features such as automatic translation, history records, and favorites.",
|
||
"sd-model-preview-xd": "sd-model-preview-xd",
|
||
"Adds model, LoRA and embedding previews to the UI including preview images, descriptions and LoRA prompt lists.": "Adds model, LoRA and embedding previews to the UI including preview images, descriptions and LoRA prompt lists.",
|
||
"!After Detailer": "!After Detailer",
|
||
"Automatic detection, masking and inpainting tool for details": "Automatic detection, masking and inpainting tool for details",
|
||
"Weight Gradient": "Weight Gradient",
|
||
"Allows you to dynamically change the weights of tokens during generation. Useful in morphing.": "Allows you to dynamically change the weights of tokens during generation. Useful in morphing.",
|
||
"One Button Prompt is a script for beginners and advanced users that generates an entire prompt from scratch. It is random, but controlled. You simply load up the script and press generate, and let it inspire you.": "One Button Prompt is a script for beginners and advanced users that generates an entire prompt from scratch. It is random, but controlled. You simply load up the script and press generate, and let it inspire you.",
|
||
"Miaoshouai Assistant": "Miaoshouai Assistant",
|
||
"Miaoshouai Assistant allows you to enhance your automatic1111 webui user experience, including updating boot settings, freeup vram, managing and downloading your models from civitai.com and liandange.com, generate prompts from chatgpt all through a single tab.": "Miaoshouai Assistant allows you to enhance your automatic1111 webui user experience, including updating boot settings, freeup vram, managing and downloading your models from civitai.com and liandange.com, generate prompts from chatgpt all through a single tab.",
|
||
"miniPaint": "miniPaint",
|
||
"The miniPaint extension allows for better image editing capabilites. Edit images simply direct inside the webui!": "The miniPaint extension allows for better image editing capabilites. Edit images simply direct inside the webui!",
|
||
"StableSR": "StableSR",
|
||
"WebUI extension for StableSR - a powerful upscaler for both realistic and anime images": "WebUI extension for StableSR - a powerful upscaler for both realistic and anime images",
|
||
"Web UI client queue": "Web UI client queue",
|
||
"Adds a queue function to the web ui that processes a set of settings one or more times, it can then load a different set of settings and so on.": "Adds a queue function to the web ui that processes a set of settings one or more times, it can then load a different set of settings and so on.",
|
||
"Distributed": "Distributed",
|
||
"Generate batches more quickly by chaining together separate webui instances": "Generate batches more quickly by chaining together separate webui instances",
|
||
"StableStudio Adapter": "StableStudio Adapter",
|
||
"A custom extension for webui to extend rest APIs to do some local operations, using in StableStudio.": "A custom extension for webui to extend rest APIs to do some local operations, using in StableStudio.",
|
||
"Quick Tab Switch": "Quick Tab Switch",
|
||
"Simple tab switcher for Stable Diffusion WebUI. From now on, no matter how many tabs you add, no more finding for them by yourself!": "Simple tab switcher for Stable Diffusion WebUI. From now on, no matter how many tabs you add, no more finding for them by yourself!",
|
||
"Lua": "Lua",
|
||
"Generate images with Lua scripts in Stable Diffusion webui.": "Generate images with Lua scripts in Stable Diffusion webui.",
|
||
"Model Downloader": "Model Downloader",
|
||
"Alternative tool for Downloading Models, Recommended for Cloud users.": "Alternative tool for Downloading Models, Recommended for Cloud users.",
|
||
"Styles Editor": "Styles Editor",
|
||
"Adds a spreadsheet-style editor for saved styles, with support for filtering, search and replace, and subdividing styles into multiple files": "Adds a spreadsheet-style editor for saved styles, with support for filtering, search and replace, and subdividing styles into multiple files",
|
||
"Clip I/O": "Clip I/O",
|
||
"The extension allows you to investigate embeddings/conditioning and feed conditioning to Stable Diffusion.": "The extension allows you to investigate embeddings/conditioning and feed conditioning to Stable Diffusion.",
|
||
"Inpaint Anything": "Inpaint Anything",
|
||
"The Inpaint Anything extension performs SD inpainting, cleaner, ControlNet inpaint, and sending a mask to img2img, using a mask selected from the segmentation output of Segment Anything.": "The Inpaint Anything extension performs SD inpainting, cleaner, ControlNet inpaint, and sending a mask to img2img, using a mask selected from the segmentation output of Segment Anything.",
|
||
"QR Code Generator": "QR Code Generator",
|
||
"Create QR Codes for ControlNet.": "Create QR Codes for ControlNet.",
|
||
"sd-webui-roop": "sd-webui-roop",
|
||
"Enable face swapping with reference image.": "Enable face swapping with reference image.",
|
||
"sd-webui-color-enhance": "sd-webui-color-enhance",
|
||
"Enhance image colors using GIMP/GEGL \"Color Enhance\" algorithm.": "Enhance image colors using GIMP/GEGL \"Color Enhance\" algorithm.",
|
||
"sd-webui-bluescape": "sd-webui-bluescape",
|
||
"Upload generated images to a Bluescape workspace for review and collaboration.": "Upload generated images to a Bluescape workspace for review and collaboration.",
|
||
"sd-webui-prompt_history": "sd-webui-prompt_history",
|
||
"Automatic store your generation info with image and apply back anytime.": "Automatic store your generation info with image and apply back anytime.",
|
||
"Danbooru Prompt": "Danbooru Prompt",
|
||
"Fetch tags from Danbooru images link": "Fetch tags from Danbooru images link",
|
||
"Pixel art": "Pixel art",
|
||
"Extension that provides basic functionality for pixel art: downscaling, palette limiting, grayscale, black&white, ability to change image colors with custom color palette": "Extension that provides basic functionality for pixel art: downscaling, palette limiting, grayscale, black&white, ability to change image colors with custom color palette",
|
||
"Lobe Theme": "Lobe Theme",
|
||
"The modern theme for stable diffusion webui, legacy verison a.k.a kitchen theme.": "The modern theme for stable diffusion webui, legacy verison a.k.a kitchen theme.",
|
||
"Kitchen Theme": "Kitchen 主題",
|
||
"Custom Theme.": "自定義主題。",
|
||
"IF_prompt_MKR": "IF_prompt_MKR",
|
||
"Creates prompts using a local LlMs via Oobabooga text webUI API": "Creates prompts using a local LlMs via Oobabooga text webUI API",
|
||
"3D Editor": "3D Editor",
|
||
"3D modeling features (add/edit basic elements, load your custom model, modify scene and so on), then send screenshot to txt2img or img2img as your ControlNet's reference image, basing on ThreeJS editor.": "3D modeling features (add/edit basic elements, load your custom model, modify scene and so on), then send screenshot to txt2img or img2img as your ControlNet's reference image, basing on ThreeJS editor.",
|
||
"Aspect Ratio selector plus": "Aspect Ratio selector plus",
|
||
"Fork of Aspect Ratio selector with new features and logic for aspect ratio": "Fork of Aspect Ratio selector with new features and logic for aspect ratio",
|
||
"SD Delete Button": "SD Delete Button",
|
||
"Add a delete button for txt2img and img2img using Send2Trash": "Add a delete button for txt2img and img2img using Send2Trash",
|
||
"sd-webui-qrcode-toolkit": "sd-webui-qrcode-toolkit",
|
||
"Integration with Anthony's QR Toolkit for easy QR Code generation and verification.": "Integration with Anthony's QR Toolkit for easy QR Code generation and verification.",
|
||
"SadTalker": "SadTalker",
|
||
"Generating talking head videos with facial image and speech audio": "Generating talking head videos with facial image and speech audio",
|
||
"Auto-Photoshop-StableDiffusion-Plugin": "Auto-Photoshop-StableDiffusion-Plugin",
|
||
"Adds API routes for Auto-Photoshop-StableDiffusion-Plugin": "Adds API routes for Auto-Photoshop-StableDiffusion-Plugin",
|
||
"Civitai Shortcut": "Civitai Shortcut",
|
||
"This extension allows you to register the models available on civitai as favorites (shortcuts) in sdui, and then you can download the models using the registered shortcuts when needed.": "This extension allows you to register the models available on civitai as favorites (shortcuts) in sdui, and then you can download the models using the registered shortcuts when needed.",
|
||
"Interrogates single or multiple image files using various alternative models, similar to deepdanbooru interrogate.": "使用各種替代模型檢查單一或多個圖像檔，類似於 deepdanbooru 的檢查。",
|
||
"Loopback Scaler": "Loopback Scaler",
|
||
"Iteratively improves image quality and detail via user-controlled, gradual resolution increments.": "Iteratively improves image quality and detail via user-controlled, gradual resolution increments.",
|
||
"Mask2Background": "Mask2Background",
|
||
"Take a png image, generate a background and mask, then send it to img2img to generate a new backgrou": "Take a png image, generate a background and mask, then send it to img2img to generate a new backgrou",
|
||
"ComfyUI": "ComfyUI",
|
||
"Embed ComfyUI workflows in different sections of the Webui": "Embed ComfyUI workflows in different sections of the Webui",
|
||
"GPU temperature protection": "GPU temperature protection",
|
||
"Pause image generation when GPU is to hot, suppots NVIDIA & AMD GPUs": "Pause image generation when GPU is to hot, suppots NVIDIA & AMD GPUs",
|
||
"zoom-image": "zoom-image",
|
||
"Pan and Zoom for fullscreen image viewer with mouse and gesture.": "Pan and Zoom for fullscreen image viewer with mouse and gesture.",
|
||
"Shutdown button": "Shutdown button",
|
||
"Adds a button in quick settings for killing webui": "Adds a button in quick settings for killing webui",
|
||
"Provides more options for latent upscale in img2img, surpassing those offered by Hires Fix for the txt2img process.": "Provides more options for latent upscale in img2img, surpassing those offered by Hires Fix for the txt2img process.",
|
||
"sd-history-slider": "sd-history-slider",
|
||
"A slider change the prompt based on the history of what was used.": "A slider change the prompt based on the history of what was used.",
|
||
"prompts filter": "prompts filter",
|
||
"Filter out banned words in prompts and negative_prompts, and also filter out duplicate prompts and empty prompts.": "Filter out banned words in prompts and negative_prompts, and also filter out duplicate prompts and empty prompts.",
|
||
"sd-webui-animatediff": "sd-webui-animatediff",
|
||
"This extension integrates AnimateDiff into WebUI and generates GIF just like generating images": "This extension integrates AnimateDiff into WebUI and generates GIF just like generating images",
|
||
"Dynamic Javascript": "Dynamic Javascript",
|
||
"Embed Javascript code blocks in positive and negative prompts.": "Embed Javascript code blocks in positive and negative prompts.",
|
||
"Detection Detailer": "檢測細緻化",
|
||
"Dotgeo(hijack) Detection Detailer. Fork of ddetailer. Object detection and auto-mask extension for Stable Diffusion web UI.": "Dotgeo(hijack) Detection Detailer. Fork of ddetailer. Object detection and auto-mask extension for Stable Diffusion web UI.",
|
||
"seamless-tile-inpainting": "seamless-tile-inpainting",
|
||
"A script for making tiles seamless using inpainting. Designed for SD1.5 inpainting model at 512x512, but should work fine with other inpainting models.": "A script for making tiles seamless using inpainting. Designed for SD1.5 inpainting model at 512x512, but should work fine with other inpainting models.",
|
||
"FaceSwapLab": "FaceSwapLab",
|
||
"Extended faceswap with multiple faceswaps, inpainting, checkpoints.": "Extended faceswap with multiple faceswaps, inpainting, checkpoints.",
|
||
"Style Selector for SDXL 1.0": "Style Selector for SDXL 1.0",
|
||
"a Automatic1111 Extension allows users to select and apply different styles to their inputs using SDXL 1.0.": "a Automatic1111 Extension allows users to select and apply different styles to their inputs using SDXL 1.0.",
|
||
"sd-webui-oldsix-prompt": "sd-webui-oldsix-prompt",
|
||
"Prompt library - comes with built-in Chinese libeary": "Prompt library - comes with built-in Chinese libeary",
|
||
"Custom Hires Fix": "Custom Hires Fix",
|
||
"Adds custom hires fix with advanced features to improve details.": "Adds custom hires fix with advanced features to improve details.",
|
||
"Adds support for SD XL refiner models, it's extending the pipeline to process the last steps with the refiner models Unet.": "Adds support for SD XL refiner models, it's extending the pipeline to process the last steps with the refiner models Unet.",
|
||
"sd-webui-deoldify": "sd-webui-deoldify",
|
||
"DeOldify for Stable Diffusion WebUI:Colorize of old photos and old video, based on deoldify": "DeOldify for Stable Diffusion WebUI:Colorize of old photos and old video, based on deoldify",
|
||
"sd-wav2lip-uhq": "sd-wav2lip-uhq",
|
||
"All-in-one solution for creating high-quality lip-sync videos based on video or image": "All-in-one solution for creating high-quality lip-sync videos based on video or image",
|
||
"Controlnet Fastload": "Controlnet Fastload",
|
||
"Save and load controlnet parameters": "Save and load controlnet parameters",
|
||
"LoRA Control": "LoRA Control",
|
||
"Dynamically control the weights of LoRAs during image generation": "Dynamically control the weights of LoRAs during image generation",
|
||
"Allows you to use __name__ syntax in your prompt to get a random line from a file named name.txt in the wildcards directory.": "Allows you to use __name__ syntax in your prompt to get a random line from a file named name.txt in the wildcards directory.",
|
||
"SD Ratio Lock": "SD Ratio Lock",
|
||
"Locks image aspect ratio": "Locks image aspect ratio",
|
||
"sd-webui-chatgpt": "sd-webui-chatgpt",
|
||
"Using ChatGPT in Stable Diffusion web UI. When you say something like 'generate an image', ChatGPT will automatically generate a prompt and generate an image.": "Using ChatGPT in Stable Diffusion web UI. When you say something like 'generate an image', ChatGPT will automatically generate a prompt and generate an image.",
|
||
"sd-webui-auto-tweet.json": "sd-webui-auto-tweet.json",
|
||
"The generated images are automatically posted to your Twitter feed. There is also a button to post the generated image to Twitter.": "The generated images are automatically posted to your Twitter feed. There is also a button to post the generated image to Twitter.",
|
||
"zh_Hant Localization": "繁體中文（zh_Hant）語言包",
|
||
"Traditional Chinese localization (mixin zh_TW and zh_Hans)": "繁體中文（zh_Hant）語言包（合併 zh_TW 與 zh_Hans 語言包已翻譯的內容來讓介面有更多中文說明）",
|
||
"SD Webui Vectorscope CC": "SD Webui Vectorscope CC",
|
||
"Adjust the output images brightness contrast saturation through latent noise manipulation during generation": "Adjust the output images brightness contrast saturation through latent noise manipulation during generation",
|
||
"Prompt Formatter - by uwidev": "Prompt Formatter - by uwidev",
|
||
"Remove excess spaces and convert nested brackets": "Remove excess spaces and convert nested brackets",
|
||
"Prompt Format - by Haoming02": "Prompt Format - by Haoming02",
|
||
"Remove duplicated spaces and commas.": "Remove duplicated spaces and commas.",
|
||
"FABRIC": "FABRIC",
|
||
"Personalizing Diffusion Models with Iterative Feedback, a training-free approach that conditions the diffusion process on a set of feedback images": "Personalizing Diffusion Models with Iterative Feedback, a training-free approach that conditions the diffusion process on a set of feedback images",
|
||
"Webpage close confirmation dialogue": "Webpage close confirmation dialogue",
|
||
"Adds a confirmation dialogue when you try to \"close\" leave\" or \"reload\" the webpage": "Adds a confirmation dialogue when you try to \"close\" leave\" or \"reload\" the webpage",
|
||
"sd-webui-discord-ex": "sd-webui-discord-ex",
|
||
"Supports distributed deployment of SD node's Stable Diffusion WebUi Discord bot": "Supports distributed deployment of SD node's Stable Diffusion WebUi Discord bot",
|
||
"Extension to access CivitAI via WebUI: download, delete, scan for updates, list installed models, assign tags, and boost downloads with multi-threading.": "Extension to access CivitAI via WebUI: download, delete, scan for updates, list installed models, assign tags, and boost downloads with multi-threading.",
|
||
"Img2img batch interrogator": "Img2img batch interrogator",
|
||
"The extension runs the interrogator before processing each image": "The extension runs the interrogator before processing each image",
|
||
"SD Masonry Gallery": "SD Masonry Gallery",
|
||
"An images tab to display local images in a compact masonry gallery.": "An images tab to display local images in a compact masonry gallery.",
|
||
"sd-webui-depth-lib": "sd-webui-depth-lib",
|
||
"Depth map library for use with the ControlNet extension": "Depth map library for use with the ControlNet extension",
|
||
"Stable Diffusion Webui Civitai Helper": "Stable Diffusion Webui Civitai Helper",
|
||
"Download or populate models with metadata and preview image from civitai.com": "Download or populate models with metadata and preview image from civitai.com",
|
||
"Scenario loader": "Scenario loader",
|
||
"A series of tool to make it easier to create images.": "A series of tool to make it easier to create images.",
|
||
"PromptsBrowser": "PromptsBrowser",
|
||
"An extension to quickly work with, explore, and catalog prompts.": "An extension to quickly work with, explore, and catalog prompts.",
|
||
"Model Mixer": "Model Mixer",
|
||
"Checkpoint Model Mixer/Merger extension - merges models without saving a merged model, and is used for image generation. Support Merge Block Weights, XYZ plots, etc.": "Checkpoint Model Mixer/Merger extension - merges models without saving a merged model, and is used for image generation. Support Merge Block Weights, XYZ plots, etc.",
|
||
"Allows you to view PNG Info of an image without upload to webui's backend server, significantly faster when webui is hosted remotely like on Colab.": "Allows you to view PNG Info of an image without upload to webui's backend server, significantly faster when webui is hosted remotely like on Colab.",
|
||
"sd-webui-mov2mov": "sd-webui-mov2mov",
|
||
"Process videos frame by frame and automatically merge and export": "Process videos frame by frame and automatically merge and export",
|
||
"EasyPhoto": "EasyPhoto",
|
||
"Support easy photo generation with an online-trained LoRA model that guarantees high-quality output images closely relevant to the input.": "Support easy photo generation with an online-trained LoRA model that guarantees high-quality output images closely relevant to the input.",
|
||
"sd-webui-rich-text": "sd-webui-rich-text",
|
||
"An extension allows using a rich-text editor for text-to-image generation (https://github.com/songweige/rich-text-to-image).": "An extension allows using a rich-text editor for text-to-image generation (https://github.com/songweige/rich-text-to-image).",
|
||
"sd-webui-bg-mask": "sd-webui-bg-mask",
|
||
"Generate a mask for the image background": "Generate a mask for the image background",
|
||
"Ranbooru": "Ranbooru",
|
||
"Get random prompts from different boorus with a lot of creative features to influence the prompts. Works with txt2img and img2img": "Get random prompts from different boorus with a lot of creative features to influence the prompts. Works with txt2img and img2img",
|
||
"CivBrowser": "CivBrowser",
|
||
"Extension to search and download Civitai models in multiple tabs. Save model information. Send sample infotext to txt2img.": "Extension to search and download Civitai models in multiple tabs. Save model information. Send sample infotext to txt2img.",
|
||
"NSFW Blurrer-NSFWJS": "NSFW Blurrer-NSFWJS",
|
||
"Blurs NSFW images using NSFWJS, based on onnxmodel ": "Blurs NSFW images using NSFWJS, based on onnxmodel ",
|
||
"NegPiP": "NegPiP",
|
||
"Enable negative strength in the prompt. This will have a stronger effect than a negative prompt.": "Enable negative strength in the prompt. This will have a stronger effect than a negative prompt.",
|
||
"CD(Color/Detail) Tuner": "CD(Color/Detail) Tuner",
|
||
"Adjust color tone, brightness, and level of detailing using a different mechanism of LoRA or ADtailer": "Adjust color tone, brightness, and level of detailing using a different mechanism of LoRA or ADtailer",
|
||
"DevDark theme": "DevDark theme",
|
||
"Custom css based on Catppuccin, enable / disabled via extensions tab.": "Custom css based on Catppuccin, enable / disabled via extensions tab.",
|
||
"auxiliary API": "auxiliary API",
|
||
"Adds API routes for uploading, removing, syncing models and etc": "Adds API routes for uploading, removing, syncing models and etc",
|
||
"ReActor": "ReActor",
|
||
"Fast and Simple FaceSwap Extension with a lot of improvements. Read README.md, additional installation steps required": "Fast and Simple FaceSwap Extension with a lot of improvements. Read README.md, additional installation steps required",
|
||
"TensorRT": "TensorRT",
|
||
"TensorRT acceleration for Stable Diffusion on NVIDIA RTX GPUs.": "TensorRT acceleration for Stable Diffusion on NVIDIA RTX GPUs.",
|
||
"encrypt-image": "encrypt-image",
|
||
"Encrypt and save the image to the disk to reduce the risk of account suspension when storing images in public clouds. When installing and starting, you need to add the parameter --encrypt-pass=your password.": "Encrypt and save the image to the disk to reduce the risk of account suspension when storing images in public clouds. When installing and starting, you need to add the parameter --encrypt-pass=your password.",
|
||
"NudeNet NSFW Censor": "NudeNet NSFW Censor",
|
||
"Customizable detection and censoring of NSFW portions within an image using NudeNet.": "Customizable detection and censoring of NSFW portions within an image using NudeNet.",
|
||
"Latent Consistency Models": "Latent Consistency Models",
|
||
"Generate high quality images in just 4 steps. Run Latent Consistency Models with Automatic1111.": "Generate high quality images in just 4 steps. Run Latent Consistency Models with Automatic1111.",
|
||
"CADS": "CADS",
|
||
"CADS greatly increases diversity of generated images by adding scheduled noise to the conditioning at inference time; an implementation of the novel method described in arXiv:2310.17347 [cs.CV].": "CADS greatly increases diversity of generated images by adding scheduled noise to the conditioning at inference time; an implementation of the novel method described in arXiv:2310.17347 [cs.CV].",
|
||
"sd-webui-facefusion": "sd-webui-facefusion",
|
||
"Video face swapper and enhancer.": "Video face swapper and enhancer.",
|
||
"Hotshot-XL-Automatic1111": "Hotshot-XL-Automatic1111",
|
||
"State-of-the-art AI text-to-GIF model trained to work alongside Stable Diffusion XL": "State-of-the-art AI text-to-GIF model trained to work alongside Stable Diffusion XL",
|
||
"Inpaint difference": "Inpaint difference",
|
||
"Use the difference between 2 images to generate an inpaint mask. Adds a new operation mode.": "Use the difference between 2 images to generate an inpaint mask. Adds a new operation mode.",
|
||
"Temporal": "Temporal",
|
||
"A \"loopback on steroids\" that allows either processing images in a slightly more advanced way, or making the morphing animations out of them.": "A \"loopback on steroids\" that allows either processing images in a slightly more advanced way, or making the morphing animations out of them.",
|
||
"FaceChain": "FaceChain",
|
||
"FaceChain is a deep-learning toolchain for generating your Digital-Twin. With a minimum of 1 portrait-photo, you can create a Digital-Twin of your own and start generating personal portraits in different settings ": "FaceChain is a deep-learning toolchain for generating your Digital-Twin. With a minimum of 1 portrait-photo, you can create a Digital-Twin of your own and start generating personal portraits in different settings ",
|
||
"Stylez": "Stylez",
|
||
"An improved styles Libary with 600+ built in styles. Prompt generation is included. Style creating/Editing. Auto CSV conversion to work with Stylez. CivitAI image browser": "An improved styles Libary with 600+ built in styles. Prompt generation is included. Style creating/Editing. Auto CSV conversion to work with Stylez. CivitAI image browser",
|
||
"sd-webui-panorama-tools": "sd-webui-panorama-tools",
|
||
"Various tools for creating/editing/viewing 360 degree panoramic images.": "Various tools for creating/editing/viewing 360 degree panoramic images.",
|
||
"sd-webui-extended-style-saver": "sd-webui-extended-style-saver",
|
||
"Save your AI prompts easily. This extension helps you keep important details like name, model, VAE, image size, prompt, and negative prompt for creating AI outputs.": "Save your AI prompts easily. This extension helps you keep important details like name, model, VAE, image size, prompt, and negative prompt for creating AI outputs.",
|
||
"Semantic Guidance": "Semantic Guidance",
|
||
"Adds an extra positive / negative prompt for modifying details without necessarily changing composition. Make subtle or major edits. Better negative prompting. Unofficial implementation of arXiv:2301.12247 [cs.CV]": "Adds an extra positive / negative prompt for modifying details without necessarily changing composition. Make subtle or major edits. Better negative prompting. Unofficial implementation of arXiv:2301.12247 [cs.CV]",
|
||
"SD Web UI Modal Info": "SD Web UI Modal Info",
|
||
"Displays prompt information when image is in full screen.": "Displays prompt information when image is in full screen.",
|
||
"A Person Mask Generator": "A Person Mask Generator",
|
||
"Extension for Automatic1111 to automatically create masks for Background/Hair/Body/Face/Clothes in Img2Img": "Extension for Automatic1111 to automatically create masks for Background/Hair/Body/Face/Clothes in Img2Img",
|
||
"Style variables": "Style variables",
|
||
"Use existing styles as variables in prompts": "Use existing styles as variables in prompts",
|
||
"Use grid (output to grid dir)": "使用網格（輸出到網格目錄）",
|
||
"Prevent Empty Spot": "防止空白區域",
|
||
"Batch Length As Row": "批次長度作為一列",
|
||
"Heatmap blend alpha": "熱度圖混合透明度",
|
||
"Heatmap image scale": "熱度圖縮放比例",
|
||
"Trace each layers": "追蹤每個層級",
|
||
"Use layers as row instead of Batch Length": "將圖層作為行而非批次長度使用",
|
||
"stable-diffusion-webui-daam": "stable-diffusion-webui-daam",
|
||
"https://github.com/toriato/stable-diffusion-webui-daam.git": "https://github.com/toriato/stable-diffusion-webui-daam.git",
|
||
"stable-diffusion-webui-aesthetic-image-scorer": "美术风格评分",
|
||
"https://github.com/tsngo/stable-diffusion-webui-aesthetic-image-scorer.git": "https://github.com/tsngo/stable-diffusion-webui-aesthetic-image-scorer.git",
|
||
"Saved main elements": "Saved main elements",
|
||
"tabs": "tabs",
|
||
"Saved elements from txt2img": "Saved elements from txt2img",
|
||
"negative_prompt": "反相提示詞",
|
||
"sampling": "sampling",
|
||
"sampling_steps": "sampling_steps",
|
||
"batch_count": "生成批次",
|
||
"batch_size": "每批數量",
|
||
"restore_faces": "面部修復",
|
||
"tiling": "可平鋪",
|
||
"hires_upscaler": "高解析度放大工具",
|
||
"hires_steps": "高解析步驟",
|
||
"hires_scale": "hires_scale",
|
||
"hires_resize_x": "hires_resize_x",
|
||
"hires_resize_y": "hires_resize_y",
|
||
"hires_denoising_strength": "高解析度修正重繪幅度",
|
||
"Saved elements from img2img": "Saved elements from img2img",
|
||
"resize_mode": "縮放模式",
|
||
"denoising_strength": "重繪幅度",
|
||
"https://github.com/ilian6806/stable-diffusion-webui-state.git": "https://github.com/ilian6806/stable-diffusion-webui-state.git",
|
||
"Text2Prompt": "文生提示詞",
|
||
"Input Theme": "輸入情境",
|
||
"Input Negative Theme": "輸入反向情境",
|
||
"Negative strength": "反向情境強度",
|
||
"Replace underscore in tag with whitespace": "將標記內下橫線替換成空格",
|
||
"Escape brackets in tag": "轉義標記內括號",
|
||
"Generation Settings": "生成設定",
|
||
"Database": "資料庫",
|
||
"Tag count filter": "Tag count filter",
|
||
"Tag range:": "Tag range:",
|
||
"≥ 0 tagged": "≥ 0 tagged",
|
||
"(14589 tags total)": "(14589 tags total)",
|
||
"Method to convert similarity into probability": "Method to convert similarity into probability",
|
||
"Cutoff and Power": "Cutoff and Power",
|
||
"Softmax": "Softmax",
|
||
"Power": "Power",
|
||
"Top-k": "Top-k",
|
||
"Top-p (Nucleus)": "Top-p (Nucleus)",
|
||
"Max number of tags": "標記最大數量",
|
||
"k value": "k 值",
|
||
"p value": "p 值",
|
||
"Use weighted choice": "Use weighted choice",
|
||
"stable-diffusion-webui-text2prompt": "stable-diffusion-webui-text2prompt",
|
||
"https://github.com/toshiaki1729/stable-diffusion-webui-text2prompt.git": "https://github.com/toshiaki1729/stable-diffusion-webui-text2prompt.git",
|
||
"openOutpaint": "開源圖像擴展",
|
||
"openOutpaint-webUI-extension": "openOutpaint-webUI-extension",
|
||
"https://github.com/zero01101/openOutpaint-webUI-extension.git": "https://github.com/zero01101/openOutpaint-webUI-extension.git",
|
||
"Control Model number": "Control Model number",
|
||
"Use online version": "Use online version",
|
||
"sd-webui-3d-open-pose-editor": "sd-webui-3d-open-pose-editor",
|
||
"https://github.com/nonnonstop/sd-webui-3d-open-pose-editor.git": "https://github.com/nonnonstop/sd-webui-3d-open-pose-editor.git",
|
||
"stable-diffusion-webui-pixelization": "stable-diffusion-webui-pixelization",
|
||
"https://github.com/AUTOMATIC1111/stable-diffusion-webui-pixelization.git": "https://github.com/AUTOMATIC1111/stable-diffusion-webui-pixelization.git",
|
||
"DreamArtist Create embedding": "夢想家（DreamArtist）創建嵌入",
|
||
"DreamArtist Train": "夢想家（DreamArtist）訓練",
|
||
"Process Att-Map": "處理注意力圖（Att-Map）",
|
||
"Unet Learning rate": "Unet 模型的學習率",
|
||
"Train with reconstruction": "訓練時開啟重建",
|
||
"Attention Map": "注意力圖（Att-Map）",
|
||
"CFG scale (dynamic cfg: low,high:type e.g. 1.0-3.5:cos)": "提示詞相關性（動態 CFG：low,high:type，例如 1.0-3.5:cos）",
|
||
"Reconstruction loss weight": "重建損失權重",
|
||
"Negative lr weight": "反向的學習率權重",
|
||
"Classifier path": "分類器（Classifier）的路徑",
|
||
"Prompt template file": "提示詞模版檔案",
|
||
"Positive \"filewords\" only": "僅使用正向「詞彙」",
|
||
"Experimental features (May be solve the problem of erratic training and difficult to reproduce [set EMA to 0.97])": "實驗性功能（可能解決訓練不穩定和難以重現的問題 [將 EMA 設定為 0.97]）",
|
||
"EMA replace steps (positive)": "EMA 替換步數 (正)",
|
||
"EMA replace steps (nagative)": "EMA 替換步數 (負)",
|
||
"beta1": "β1",
|
||
"beta2": "β2",
|
||
"Since there is a self-attention operation in VAE, it may change the distribution of features. This processing will superimpose the attention map of self-attention on the original Att-Map.": "由於 VAE 中使用了自我注意力機制，這可能會改變特徵的分佈。這種處理會將自我注意力產生的注意力圖與原始的注意力圖疊加在一起。",
|
||
"Data directory": "資料目錄",
|
||
"Process": "行程, 程序",
|
||
"DreamArtist-sd-webui-extension": "梦作家",
|
||
"Path to classifier ckpt, can be empty": "分類器的路徑，可以是空白",
|
||
"https://github.com/7eu7d7/DreamArtist-sd-webui-extension.git": "https://github.com/7eu7d7/DreamArtist-sd-webui-extension.git",
|
||
"Travel mode": "变迁模式",
|
||
"replace": "取代",
|
||
"Linear interp method": "Linear interp method",
|
||
"lerp": "lerp",
|
||
"Replace dimension": "Replace dimension",
|
||
"token": "token",
|
||
"Replace order": "取代顺序",
|
||
"Travel steps between stages": "每个阶段变迁的迭代步数",
|
||
"Frame genesis": "Frame genesis",
|
||
"Denoise steps for embryo": "Denoise steps for embryo",
|
||
"Depth image file": "Depth image file",
|
||
"Video file format": "视频格式",
|
||
"mp4": "mp4",
|
||
"Video FPS": "视频 FPS",
|
||
"Pad begin/end frames": "预留开始/结束帧",
|
||
"Pick frame by slice": "Pick frame by slice",
|
||
"Ext. export video": "Ext. export video",
|
||
"Ext. upscale": "Ext. upscale",
|
||
"Ext. depth-image-io (for depth2img models)": "Ext. depth-image-io (for depth2img models)",
|
||
"stable-diffusion-webui-prompt-travel": "提示词变迁",
|
||
"https://github.com/Kahsolt/stable-diffusion-webui-prompt-travel.git": "https://github.com/Kahsolt/stable-diffusion-webui-prompt-travel.git",
|
||
"Prompt Travel": "提示词变迁",
|
||
"slerp": "slerp",
|
||
"successive": "successive",
|
||
"embryo": "embryo",
|
||
"gif": "gif",
|
||
"webm": "webm",
|
||
"Save Weights": "儲存權重",
|
||
"Generate Samples": "產生樣本",
|
||
"Lora Model": "LoRA 模型",
|
||
"Use Lora Extended": "使用 LoRA 擴充功能（Locon）",
|
||
"Train Inpainting Model": "訓練局部重繪模型",
|
||
"Class Batch Size": "類別每批數量",
|
||
"Lora UNET Learning Rate": "LoRA UNET 學習率",
|
||
"Lora Text Encoder Learning Rate": "LoRA Text Encoder 學習率",
|
||
"linear_with_warmup": "linear_with_warmup",
|
||
"cosine_annealing": "cosine_annealing",
|
||
"cosine_annealing_with_restarts": "cosine_annealing_with_restarts",
|
||
"polynomial": "多項式（polynomial）",
|
||
"constant": "常數（constant）",
|
||
"constant_with_warmup": "含預熱的常數（constant）",
|
||
"Min Learning Rate": "最小學習率",
|
||
"Number of Hard Resets": "硬重置數量",
|
||
"Constant/Linear Starting Factor": "常數/線性起始因子",
|
||
"Polynomial Power": "多項式功率",
|
||
"Scale Position": "比例位置",
|
||
"Torch AdamW": "Torch AdamW",
|
||
"8bit AdamW": "8bit AdamW",
|
||
"Lion": "Lion",
|
||
"Discord Webhook": "Discord Webhook",
|
||
"Save in .safetensors format": "以 .safetensors 格式保存",
|
||
"Lora UNET Rank": "LoRA UNET等級",
|
||
"Lora Text Encoder Rank": "LoRA 文字編碼器等級",
|
||
"Lora Weight": "LoRA 權重",
|
||
"Lora Text Weight": "LoRA 文本權重",
|
||
"Generate lora weights when saving during training.": "在訓練期間儲存時產生 LoRA。",
|
||
"Generate lora weights when training completes.": "在訓練完成時產生 LoRA。",
|
||
"Generate lora weights when training is canceled.": "在訓練取消時產生 LoRA。",
|
||
"Generate lora weights for extra networks.": "產生附加網路的 LoRA。（警告：如有使用 LoCon功能，需先安裝擴充。）",
|
||
"DDPM": "DDPM（不）",
|
||
"PNDM": "PNDM",
|
||
"LMSDiscrete": "LMSDiscrete",
|
||
"EulerDiscrete": "EulerDiscrete",
|
||
"HeunDiscrete": "HeunDiscrete",
|
||
"EulerAncestralDiscrete": "EulerAncestralDiscrete",
|
||
"DPMSolverMultistep": "DPMSolverMultistep",
|
||
"DPMSolverSinglestep": "DPMSolverSinglestep",
|
||
"KDPM2Discrete": "KDPM2Discrete",
|
||
"KDPM2AncestralDiscrete": "KDPM2AncestralDiscrete",
|
||
"DEISMultistep": "DEISMultistep",
|
||
"UniPCMultistep": "UniPCMultistep",
|
||
"Swap Sample Faces": "交換 Sample Faces",
|
||
"Swap Prompt": "交換提示詞",
|
||
"Swap Negative Prompt": "交換反向提示詞",
|
||
"Swap Steps": "交換疊代步數",
|
||
"Swap Batch": "交換批次",
|
||
"Use txt2img": "使用文生圖",
|
||
"Use TensorFloat 32": "使用TensorFloat 32",
|
||
"DEIS": "DEIS",
|
||
"Check Progress": "查看進度",
|
||
"Update Parameters": "更新參數",
|
||
"Changelog": "更新紀錄",
|
||
"X": "X",
|
||
"sd_dreambooth_extension": "sd_dreambooth_extension",
|
||
"https://github.com/d8ahazard/sd_dreambooth_extension.git": "https://github.com/d8ahazard/sd_dreambooth_extension.git",
|
||
"runwayml/stable-diffusion-v1-5": "runwayml/stable-diffusion-v1-5",
|
||
"https://discord.com/api/webhooks/XXX/XXXX": "https://discord.com/api/webhooks/XXX/XXXX",
|
||
"Conditioning Highres": "調整高解析度",
|
||
"Conditioning Highres.fix strength (for sd-v1-5-inpainting)": "高解析度修復原圖調節強度（專為 sd-v1-5-inpainting 設計）",
|
||
"Cond.fix: Disabled (none)": "條件修復：停用（無）",
|
||
"Cond.fix: Empty": "條件修復： 無",
|
||
"Cond.fix: Lowest": "條件修復： 最小",
|
||
"Cond.fix: Low": "條件修復： 小",
|
||
"Cond.fix: Medium": "條件修復： 中",
|
||
"Cond.fix: High (recommended)": "條件修復： 高（推薦）",
|
||
"Cond.fix: Highest": "條件修復： 最高",
|
||
"Cond.fix: Full": "條件修復： 完全",
|
||
"stable-diffusion-webui-conditioning-highres-fix": "高分辨率修复原图调节强度 ",
|
||
"https://github.com/klimaleksus/stable-diffusion-webui-conditioning-highres-fix.git": "https://github.com/klimaleksus/stable-diffusion-webui-conditioning-highres-fix.git",
|
||
"LAB Tools": "LAB Tools",
|
||
"Guide": "Guide",
|
||
"Abysz LAB 0.1.9 Temporal coherence tools": "Abysz LAB 0.1.9 Temporal coherence tools",
|
||
"DFI Render": "DFI Render",
|
||
"Original frames folder": "Original frames folder",
|
||
"Generated frames folder": "Generated frames folder",
|
||
"Output folder": "Output folder",
|
||
"The new algorithm will adapt to DFI tolerance to choose the parameters for each frame. IMPORTANT: The algorithm is optimized to maintain a balance between deflicking and corruption, so that it is easier to use StableDiffusion at low denoising to reconstruct lost detail while preserving the stability gained.": "The new algorithm will adapt to DFI tolerance to choose the parameters for each frame. IMPORTANT: The algorithm is optimized to maintain a balance between deflicking and corruption, so that it is easier to use StableDiffusion at low denoising to reconstruct lost detail while preserving the stability gained.",
|
||
"Source denoise:": "Source denoise:",
|
||
"A noisy source can interfere with the accuracy of the scan. This will reduce noise, but also detail. However, this does not affect the original, and sometimes flatter images are not bad for the process, although you may need to balance by reducing the DFI tolerance.": "A noisy source can interfere with the accuracy of the scan. This will reduce noise, but also detail. However, this does not affect the original, and sometimes flatter images are not bad for the process, although you may need to balance by reducing the DFI tolerance.",
|
||
"(This is a demanding algorithm)": "(This is a demanding algorithm)",
|
||
"DFI Tolerance:": "DFI Tolerance:",
|
||
"Determines the movement tolerance of the scan. Low tolerance will detect even small changes in static areas. High values will detect less movements. Ideally, it should detect the movements that are important to you, and skip the static and useless areas, reducing the flick in those.": "Determines the movement tolerance of the scan. Low tolerance will detect even small changes in static areas. High values will detect less movements. Ideally, it should detect the movements that are important to you, and skip the static and useless areas, reducing the flick in those.",
|
||
"This parameter commands the new dynamic algorithm.": "This parameter commands the new dynamic algorithm.",
|
||
"DFI Expand:": "DFI Expand:",
|
||
"DFI expand fattens the edges of the areas detected by DFI. Note: DFI tolerance modifies the amount of movement detected. This only affects that result, be it big or small. Its a complementary parameter. 0=Off.": "DFI expand fattens the edges of the areas detected by DFI. Note: DFI tolerance modifies the amount of movement detected. This only affects that result, be it big or small. Its a complementary parameter. 0=Off.",
|
||
"Source Denoise": "Source Denoise",
|
||
"DFI Tolerance": "DFI Tolerance",
|
||
"DFI Expand": "DFI Expand",
|
||
"Here you can check examples of the motion map for those parameters. It is useful, for example, to adjust denoise if you see that it detects unnecessary graininess. Keep in mind that what you see represents movement between two frames.": "Here you can check examples of the motion map for those parameters. It is useful, for example, to adjust denoise if you see that it detects unnecessary graininess. Keep in mind that what you see represents movement between two frames.",
|
||
"The black is basically what it won't process (it will let it through to preserve the movement), and the white what it will try to keep stable in that frame interpolation. Try freely. Here you can also test how the manual smooth works (advanced section).": "The black is basically what it won't process (it will let it through to preserve the movement), and the white what it will try to keep stable in that frame interpolation. Try freely. Here you can also test how the manual smooth works (advanced section).",
|
||
"Preview DFI Map": "Preview DFI Map",
|
||
"Preview amount. 0 = Quick shoot": "Preview amount. 0 = Quick shoot",
|
||
"Inter Denoise:": "Inter Denoise:",
|
||
"Reduces render pixelation generated by corruption. However, be careful. It's resource hungry, and might remove excess detail. Not recommended to change size or FPD, but to use Stable Diffusion to remove the pixelation later.": "Reduces render pixelation generated by corruption. However, be careful. It's resource hungry, and might remove excess detail. Not recommended to change size or FPD, but to use Stable Diffusion to remove the pixelation later.",
|
||
"Inter Blur:": "Inter Blur:",
|
||
"Fine tunes the dynamic blur algorithm for DFI map. Lower = Stronger blur effects. Between 2-3 recommended.": "Fine tunes the dynamic blur algorithm for DFI map. Lower = Stronger blur effects. Between 2-3 recommended.",
|
||
"Corruption Refresh:": "Corruption Refresh:",
|
||
"To reduce the distortion generated by the process, you can recover original information every X number of frames. Lower number = faster refresh.": "To reduce the distortion generated by the process, you can recover original information every X number of frames. Lower number = faster refresh.",
|
||
"Corruption Preserve:": "Corruption Preserve:",
|
||
"Here you decide how much corruption keep in each corruption refresh. Low values will recover more of the original frame, with its changes and flickering, in exchange for reducing corruption. You must find the balance that works best for your goal.": "Here you decide how much corruption keep in each corruption refresh. Low values will recover more of the original frame, with its changes and flickering, in exchange for reducing corruption. You must find the balance that works best for your goal.",
|
||
"Smooth:": "Smooth:",
|
||
"This smoothes the edges of the interpolated areas. Low values are currently recommended until the algorithm is updated.": "This smoothes the edges of the interpolated areas. Low values are currently recommended until the algorithm is updated.",
|
||
"Inter Denoise": "Inter Denoise",
|
||
"Inter Denoise Size": "Inter Denoise Size",
|
||
"Inter Denoise FPD": "Inter Denoise FPD",
|
||
"Inter Blur": "Inter Blur",
|
||
"The new dynamic algorithm will handle these parameters. Activate them only for manual control.": "The new dynamic algorithm will handle these parameters. Activate them only for manual control.",
|
||
"Corruption Refresh (Lower = Faster)": "Corruption Refresh (Lower = Faster)",
|
||
"Corruption Preserve": "Corruption Preserve",
|
||
"Smooth": "Smooth",
|
||
"Frames to render. 0=ALL": "Frames to render. 0=ALL",
|
||
"Run DFI": "Run DFI",
|
||
"Show output folder video": "Show output folder video",
|
||
"|": "|",
|
||
"Deflickers Playground": "Deflickers Playground",
|
||
"Frames folder": "Frames folder",
|
||
"I made this series of deflickers based on the standard that Vegas Pro includes. You can use them together or separately. Be careful when mixing them.": "I made this series of deflickers based on the standard that Vegas Pro includes. You can use them together or separately. Be careful when mixing them.",
|
||
"Blend:": "Blend:",
|
||
"Blends a percentage between frames. This can soften transitions and highlights. 50 is half of each frame. 80 or 20 are recommended values.": "Blends a percentage between frames. This can soften transitions and highlights. 50 is half of each frame. 80 or 20 are recommended values.",
|
||
"Overlay:": "Overlay:",
|
||
"Use the overlay image blending mode. Note that it works particularly good at mid-high values, wich will modify the overall contrast. You will have to decide what works for you.": "Use the overlay image blending mode. Note that it works particularly good at mid-high values, wich will modify the overall contrast. You will have to decide what works for you.",
|
||
"Normalize:": "Normalize:",
|
||
"Calculates the average between frames to merge them. It may be more practical if you don't have a specific Blend deflicker value in mind.": "Calculates the average between frames to merge them. It may be more practical if you don't have a specific Blend deflicker value in mind.",
|
||
"BLEND (0=Off)": "BLEND (0=Off)",
|
||
"OVERLAY (0=Off)": "OVERLAY (0=Off)",
|
||
"NORMALIZE (0=Off))": "NORMALIZE (0=Off))",
|
||
"Deflickers": "Deflickers",
|
||
"Style Fuse": "Style Fuse",
|
||
"With this you can merge two sets of frames with overlay technique. For example, you can take a style video that is just lights and/or colors, and overlay it on top of another video.": "With this you can merge two sets of frames with overlay technique. For example, you can take a style video that is just lights and/or colors, and overlay it on top of another video.",
|
||
"The resulting video will be useful for use in Img2Img Batch and that the AI render preserves these added color and lighting details, along with the details of the original video.": "The resulting video will be useful for use in Img2Img Batch and that the AI render preserves these added color and lighting details, along with the details of the original video.",
|
||
"Style frames": "Style frames",
|
||
"Video frames": "Video frames",
|
||
"Fuse Strength": "Fuse Strength",
|
||
"Fuse": "Fuse",
|
||
"Video extract": "Video extract",
|
||
"Fps. 0=Original": "Fps. 0=Original",
|
||
"What DFI does?": "What DFI does?",
|
||
"DFI processing analyzes the motion of the original video, and attempts to force that information into the generated video. Demo on https://github.com/AbyszOne/Abysz-LAB-Ext": "DFI processing analyzes the motion of the original video, and attempts to force that information into the generated video. Demo on https://github.com/AbyszOne/Abysz-LAB-Ext",
|
||
"In short, this will reduce flicker in areas of the video that don't need to change, but SD does. For example, for a man smoking, leaning against a pole, it will detect that the pole is static, and will try to prevent it from changing as much as possible.": "In short, this will reduce flicker in areas of the video that don't need to change, but SD does. For example, for a man smoking, leaning against a pole, it will detect that the pole is static, and will try to prevent it from changing as much as possible.",
|
||
"This is an aggressive process that requires a lot of control for each context. Read the recommended strategies.": "This is an aggressive process that requires a lot of control for each context. Read the recommended strategies.",
|
||
"Although Video to Video is the most efficient way, a DFI One Shot method is under experimental development as well.": "Although Video to Video is the most efficient way, a DFI One Shot method is under experimental development as well.",
|
||
"Usage strategies": "Usage strategies",
|
||
"If you get enough understanding of the tool, you can achieve a much more stable and clean enough rendering. However, this is quite demanding.": "If you get enough understanding of the tool, you can achieve a much more stable and clean enough rendering. However, this is quite demanding.",
|
||
"Instead, a much friendlier and faster way to use this tool is as an intermediate step. For this, you can allow a reasonable degree of corruption in exchange for more general stability.": "Instead, a much friendlier and faster way to use this tool is as an intermediate step. For this, you can allow a reasonable degree of corruption in exchange for more general stability.",
|
||
"You can then clean up the corruption and recover details with a second step in Stable Diffusion at low denoising (0.2-0.4), using the same parameters and seed.": "You can then clean up the corruption and recover details with a second step in Stable Diffusion at low denoising (0.2-0.4), using the same parameters and seed.",
|
||
"In this way, the final result will have the stability that we have gained, maintaining final detail. If you find a balanced workflow, you will get something at least much more coherent and stable than the raw AI render.": "In this way, the final result will have the stability that we have gained, maintaining final detail. If you find a balanced workflow, you will get something at least much more coherent and stable than the raw AI render.",
|
||
"Abysz-LAB-Ext": "Abysz-LAB-Ext",
|
||
"https://github.com/AbyszOne/Abysz-LAB-Ext": "https://github.com/AbyszOne/Abysz-LAB-Ext",
|
||
"The RAW frames you have used as base for IA generation.": "The RAW frames you have used as base for IA generation.",
|
||
"The frames of AI generated video": "The frames of AI generated video",
|
||
"Remember that each generation overwrites previous frames in the same folder.": "Remember that each generation overwrites previous frames in the same folder.",
|
||
"STAND BY...": "STAND BY...",
|
||
"Frames to process": "Frames to process",
|
||
"Processed frames": "Processed frames",
|
||
"Style to fuse": "Style to fuse",
|
||
"Remember to use same fps as generated video for DFI": "Remember to use same fps as generated video for DFI",
|
||
"Embedding Editor": "嵌入編輯器",
|
||
"Vector": "向量",
|
||
"Refresh Embeddings": "重新整理多個嵌入",
|
||
"Save Embedding": "儲存嵌入",
|
||
"Enter words and color hexes to mark weights on the sliders for guidance. Hint: Use the txt2img prompt token counter or": "輸入文字和顏色十六進制代碼以在滑桿上標記權重作為引導。 提示：使用文生圖提示詞標記計數器或使用",
|
||
"webui-tokenizer": "標記解析器擴充功能",
|
||
"to see which words are constructed using multiple sub-words, e.g. 'computer' doesn't exist in stable diffusion's CLIP dictionary and instead 'compu' and 'ter' are used (1 word but 2 embedding vectors). Currently buggy and needs a moment to process before pressing the button. If it doesn't work after a moment, try adding a random space to refresh it.": "查看哪些詞是使用多個子詞構成的，例如 Stable Diffusion 的 CLIP 字典中不存在 'computer'，而是使用 'compu' 以及 'ter'（一個單字但使用兩個嵌入向量）。目前這個擴充功能還有點問題，在按下按鈕之前需要一點時間來處理。如果過了一段時間還是不行，試試隨便加個空格重新整理一下",
|
||
"stable-diffusion-webui-embedding-editor": "Embedding 编辑器",
|
||
"https://github.com/CodeExplode/stable-diffusion-webui-embedding-editor.git": "https://github.com/CodeExplode/stable-diffusion-webui-embedding-editor.git",
|
||
"symbol:color-hex, symbol:color-hex, ...": "文字:顏色代碼, 文字:顏色代碼, ...",
|
||
"e.g. A portrait photo of embedding_name": "示例： A portrait photo of embedding_name",
|
||
"ControlNet v1.1.411": "ControlNet v1.1.411",
|
||
"InstructP2P": "InstructP2P",
|
||
"Revision": "Revision (图像提示词)",
|
||
"T2I-Adapter": "T2I-Adapter (文生图)",
|
||
"IP-Adapter": "IP-Adapter (图像提示适配器)",
|
||
"Preset name": "Preset name",
|
||
"ControlNet-M2M": "ControlNet-M2M",
|
||
"[ControlNet] Enabled": "[ControlNet] 啟用",
|
||
"[ControlNet] Model": "[ControlNet] 模型",
|
||
"[ControlNet] Guidance Start": "[ControlNet] 引導開始",
|
||
"[ControlNet] Guidance End": "[ControlNet] 引導結束",
|
||
"ControlNet-0": "ControlNet-0",
|
||
"ControlNet-1": "ControlNet-1",
|
||
"ControlNet-2": "ControlNet-2",
|
||
"ControlNet": "ControlNet",
|
||
"https://github.com/Mikubill/sd-webui-controlnet.git": "https://github.com/Mikubill/sd-webui-controlnet.git",
|
||
"[IP-Adapter]": "[IP-Adapter]",
|
||
"Noise Augmentation": "Noise Augmentation",
|
||
"sd-webui-regional-prompter": "sd-webui-regional-prompter",
|
||
"https://github.com/hako-mikan/sd-webui-regional-prompter.git": "https://github.com/hako-mikan/sd-webui-regional-prompter.git",
|
||
"Attention": "Attention",
|
||
"Directions": "Directions",
|
||
"Moods": "Moods",
|
||
"Artists": "Artists",
|
||
"Art movements": "Art movements",
|
||
"Colors": "Colors",
|
||
"Tools & Info": "Tools & Info",
|
||
"Conceptually": "Conceptually",
|
||
"Not set": "Not set",
|
||
"Image type": "Image type",
|
||
"Slider": "Slider",
|
||
"Direction": "Direction",
|
||
"Mood": "Mood",
|
||
"Set batch count to prompt count": "Set batch count to prompt count",
|
||
"Increase seed with batch size": "Increase seed with batch size",
|
||
"Show tips when generating": "Show tips when generating",
|
||
"Style influence (incomplete)": "Style influence (incomplete)",
|
||
"Sequential prompts [X]": "Sequential prompts [X]",
|
||
"SubSequential prompts [Y]": "SubSequential prompts [Y]",
|
||
"Random [A]": "Random [A]",
|
||
"Random [B]": "Random [B]",
|
||
"Random [C]": "Random [C]",
|
||
"Artist": "Artist",
|
||
"Influence": "Influence",
|
||
"Art movement": "Art movement",
|
||
"Insert default prompt": "Insert default prompt",
|
||
"Inspire me, StylePile": "Inspire me, StylePile",
|
||
"Tips and tricks": "Tips and tricks",
|
||
"If you add your own Artist, I would recommend having": "If you add your own Artist, I would recommend having",
|
||
"by Artist": "by Artist",
|
||
"in front of their name. Depending on their popularity (or lack thereof) this appears to have a very tangible influence on the result. In general, most of the elements that influence the look appear to work best with a certain strength boost, hence the 1.3 default values.": "in front of their name. Depending on their popularity (or lack thereof) this appears to have a very tangible influence on the result. In general, most of the elements that influence the look appear to work best with a certain strength boost, hence the 1.3 default values.",
|
||
"Another thing to keep in mind is relationships between keywords and type of content. For example, if you want a reasonably realistic looking image of an alien cyborg. Selecting": "Another thing to keep in mind is relationships between keywords and type of content. For example, if you want a reasonably realistic looking image of an alien cyborg. Selecting",
|
||
"Photo": "Photo",
|
||
"will mostly produce fairly clumsy results. But, if you select": "will mostly produce fairly clumsy results. But, if you select",
|
||
"3D rendering": "3D 渲染中",
|
||
"Realistic, Ultrarealistic": "Realistic, Ultrarealistic",
|
||
"Ultra detailed": "Ultra detailed",
|
||
"as direction, the result may actually be closer to what you expect. The opposite is true as well. There are certain things that you will not get to look realistic no matter what the modifiers are if Image type is not set to": "as direction, the result may actually be closer to what you expect. The opposite is true as well. There are certain things that you will not get to look realistic no matter what the modifiers are if Image type is not set to",
|
||
". Try kittens.": ". Try kittens.",
|
||
"In general just experiment with": "In general just experiment with",
|
||
". An easy way to do it is selecting random settings, a high batch count and then checking the keywords on the results you like.": "。一个简单的方法就是选择随机设置，并设定较高的批量次数，然后在你喜欢的结果中查看关键词。",
|
||
"Modifiers": "Modifiers",
|
||
"Elements of the prompt can be modified to have a certain strength or change over time. Normally you do this by typing into the prompt, but here I have added tools that will actually insert pre-formatted text so it is easier to understand what it should look like. Note that it doesn’t have to be a single word, it is a part of the prompt, so it can be several words or a full sentence. Also note that it will be added to the end of the prompt no matter where the cursor was due to limitations of gradio.": "Elements of the prompt can be modified to have a certain strength or change over time. Normally you do this by typing into the prompt, but here I have added tools that will actually insert pre-formatted text so it is easier to understand what it should look like. Note that it doesn’t have to be a single word, it is a part of the prompt, so it can be several words or a full sentence. Also note that it will be added to the end of the prompt no matter where the cursor was due to limitations of gradio.",
|
||
"A strength modifier value can be added to parts of the prompt like this": "A strength modifier value can be added to parts of the prompt like this",
|
||
"(A:1.3)": "(A:1.3)",
|
||
"< this part would be about 30% stronger. To save some typing you can select the line you want to make stronger and use": "< this part would be about 30% stronger. To save some typing you can select the line you want to make stronger and use",
|
||
"Ctrl+Shift+Arrow keys up": "Ctrl+Shift+Arrow keys up",
|
||
"to add these parenthesis and change the value. 1.3 seems like a good starting point if you want to see some impact. Interestingly, adding": "to add these parenthesis and change the value. 1.3 seems like a good starting point if you want to see some impact. Interestingly, adding",
|
||
"very": "very",
|
||
"as a keyword may have a similar or even stronger effect.": "as a keyword may have a similar or even stronger effect.",
|
||
"Insert": "Insert",
|
||
"Morph from": "Morph from",
|
||
"Morph to": "Morph to",
|
||
"Starting point": "Starting point",
|
||
"You can start with a prompt element and then, after a certain percentage of steps, start converting this prompt into something else. Basically it looks like [A:B:0.5] with A being the first part to do, B being what it should be morphing into and 0.5 representing a percentage of when it should start the conversion process. Thus in case of 0.5 that is 50% of the whole process.": "You can start with a prompt element and then, after a certain percentage of steps, start converting this prompt into something else. Basically it looks like [A:B:0.5] with A being the first part to do, B being what it should be morphing into and 0.5 representing a percentage of when it should start the conversion process. Thus in case of 0.5 that is 50% of the whole process.",
|
||
"You can mix two prompt elements where each step they get swapped. It looks like [A|B] thus processing A each odd step and B each even step.": "You can mix two prompt elements where each step they get swapped. It looks like [A|B] thus processing A each odd step and B each even step.",
|
||
"Bounce from": "Bounce from",
|
||
"Bounce to": "Bounce to",
|
||
"These last two sections appear to benefit from increasing sampling steps and CFG scale.": "These last two sections appear to benefit from increasing sampling steps and CFG scale.",
|
||
"Example images, adding your own selections to dropdowns": "Example images, adding your own selections to dropdowns",
|
||
"Example images stored in the script folders are more than just images. Their filenames are used to create the": "Example images stored in the script folders are more than just images. Their filenames are used to create the",
|
||
",": ",",
|
||
"and Art": "and Art",
|
||
"movement": "movement",
|
||
"dropdown selections. This gives you the ability to Add/Remove parameters as you wish. Just place an image in the folder and name it as the option you want to see in the dropdown. Delete image file to remove that option.": "dropdown selections. This gives you the ability to Add/Remove parameters as you wish. Just place an image in the folder and name it as the option you want to see in the dropdown. Delete image file to remove that option.",
|
||
"In case you would like to suggest an artist be added to the roster, I would recommend making 8+ sample images first. To see if SD actually “knows” that artist and their style appears unique enough. The portraits you can see in the info pages were generated with the following settings:": "In case you would like to suggest an artist be added to the roster, I would recommend making 8+ sample images first. To see if SD actually “knows” that artist and their style appears unique enough. The portraits you can see in the info pages were generated with the following settings:",
|
||
"Sample portrait prompt": "Sample portrait prompt",
|
||
"Positive: Portrait of an attractive young lady,flower field background,(by [X]:1.3), square ratio": "Positive: Portrait of an attractive young lady,flower field background,(by [X]:1.3), square ratio",
|
||
"Negative - missing limbs, extra limbs, watermark,label,text": "Negative - missing limbs, extra limbs, watermark,label,text",
|
||
"[X] is": "[X] is",
|
||
"Artist Name Surname": "Artist Name Surname",
|
||
"From my research adding": "From my research adding",
|
||
"can really help to get the correct look.": "can really help to get the correct look.",
|
||
"20 steps on Euler A": "20 steps on Euler A",
|
||
"Seed - 669 - batch of 4 images": "Seed - 669 - batch of 4 images",
|
||
"Generally that produces a fairly nice portrait with enough room to show off the given style. Do compare the results to the actual style. As SD will produce something it ‘thinks’ may be correct based on their name (guessing nationality, basing it on something that has mentioned a similar name etc) and that influences the results, but not in a good way.": "Generally that produces a fairly nice portrait with enough room to show off the given style. Do compare the results to the actual style. As SD will produce something it ‘thinks’ may be correct based on their name (guessing nationality, basing it on something that has mentioned a similar name etc) and that influences the results, but not in a good way.",
|
||
"Hello, StylePile here": "Hello, StylePile here",
|
||
"Introduction": "Introduction",
|
||
"is a mix and match system for adding elements to prompts that affect the style of the result. Hence the name. By default, these elements are placed in a specific order and given strength values. Which means the result sort-of evolves. I have generated thousands of images for each main": "is a mix and match system for adding elements to prompts that affect the style of the result. Hence the name. By default, these elements are placed in a specific order and given strength values. Which means the result sort-of evolves. I have generated thousands of images for each main",
|
||
"and tweaked the keywords to attempt giving expected results most of the time. Certainly, your suggestions for improvements are very welcome.": "并微调了关键词，以便尽可能地产生预期效果。当然，我们非常欢迎您的改进建议。",
|
||
"Base workflow": "Base workflow",
|
||
"You select extra settings in this script and then hit the standard orange": "You select extra settings in this script and then hit the standard orange",
|
||
"button to get results.": "button to get results.",
|
||
"For example, if you select the": "For example, if you select the",
|
||
"Painting": "Painting",
|
||
"image type, then almost all results will look like Paintings. Selecting": "image type, then almost all results will look like Paintings. Selecting",
|
||
"will have a certain influence on the overall look in some way (if it’s something humanoid it may show emotion, but also colors and overall feel may change). Setting": "will have a certain influence on the overall look in some way (if it’s something humanoid it may show emotion, but also colors and overall feel may change). Setting",
|
||
"will change the general tonality of the result. And setting": "will change the general tonality of the result. And setting",
|
||
"View": "View",
|
||
"will attempt to change how the subject is viewed. Attempt, because view appears to be the least reliable keyword. These elements are placed in order of influence and supported by certain strength values. These basic settings produce very quick results close to the general look you want.": "will attempt to change how the subject is viewed. Attempt, because view appears to be the least reliable keyword. These elements are placed in order of influence and supported by certain strength values. These basic settings produce very quick results close to the general look you want.",
|
||
" ‘’})": " ‘’})",
|
||
"Moving on, adding a": "Moving on, adding a",
|
||
"will combine with": "will combine with",
|
||
"to influence how the result generally looks. These styles are based on classic and modern Painting/Art/design movements (which I picked after hours and thousands of samples of testing) and can have a strong influence on the end result. Either it will be more realistic or artistic, or look like a comic book etc. In general, this is a really strong element for getting the look you want. Its influence can be adjusted with the slider above. Experiment with the values, keeping in mind that anything above 1.5 will start becoming a mess. In a similar way, but more focused, you can select an": "to influence how the result generally looks. These styles are based on classic and modern Painting/Art/design movements (which I picked after hours and thousands of samples of testing) and can have a strong influence on the end result. Either it will be more realistic or artistic, or look like a comic book etc. In general, this is a really strong element for getting the look you want. Its influence can be adjusted with the slider above. Experiment with the values, keeping in mind that anything above 1.5 will start becoming a mess. In a similar way, but more focused, you can select an",
|
||
"and, of course, that will have a very visible effect on the result as well. Currently there are 135 artists, 55 art styles and 25 emotions available for selection and represented with preview images.": "当然，这会明显影响结果。现有135位艺术家、55种艺术风格和25种情绪可供选择，并配有预览图。",
|
||
"Strength of these settings has been preset at 1.3, as that appears to be the golden ratio for getting good results. Sometimes very low settings have an interesting result as well. You can, and should, freely mix and match these settings to get different results. Classic Painting styles affected or affecting 3D look quite interesting. Photography can look cool with some of the brighter, more artistic styles etc. Sometimes raising CFG scale to 15,20 or more also helps to REALLY push the style onto the image.": "Strength of these settings has been preset at 1.3, as that appears to be the golden ratio for getting good results. Sometimes very low settings have an interesting result as well. You can, and should, freely mix and match these settings to get different results. Classic Painting styles affected or affecting 3D look quite interesting. Photography can look cool with some of the brighter, more artistic styles etc. Sometimes raising CFG scale to 15,20 or more also helps to REALLY push the style onto the image.",
|
||
"Advanced workflow": "高级工作流",
|
||
"StylePile can overtake the generation process, allowing you to generate a large amount of different results with very little extra work. There are two types of variables you can use: [X] and [R]. When you add an [X] to your prompt, it sequentially takes values from the": "StylePile can overtake the generation process, allowing you to generate a large amount of different results with very little extra work. There are two types of variables you can use: [X] and [R]. When you add an [X] to your prompt, it sequentially takes values from the",
|
||
"Sequential prompts": "Sequential prompts",
|
||
"text area. You can have dozens of lines there and they will be processed in sequence. When you add [R] to the prompt a value from the": "text area. You can have dozens of lines there and they will be processed in sequence. When you add [R] to the prompt a value from the",
|
||
"Random": "Random",
|
||
"text area will be inserted in its place. By combining these a huge variety in prompts is very easy to do.": "text area will be inserted in its place. By combining these a huge variety in prompts is very easy to do.",
|
||
"When using this,": "When using this,",
|
||
"will move through the prompts and": "will move through the prompts and",
|
||
"will set how many copies with the given prompt to make. If the seed is not random, it will increase with each batch size step. Any random elements will still be picked randomly.": "will set how many copies with the given prompt to make. If the seed is not random, it will increase with each batch size step. Any random elements will still be picked randomly.",
|
||
"In conclusion": "In conclusion",
|
||
"I made this because manually changing keywords, looking up possible styles, etc was a pain. It is meant as a fun tool to explore possibilities and make learning Stable Diffusion easier. If you have some ideas or, better yet, would like to contribute in some way*, just visit": "I made this because manually changing keywords, looking up possible styles, etc was a pain. It is meant as a fun tool to explore possibilities and make learning Stable Diffusion easier. If you have some ideas or, better yet, would like to contribute in some way*, just visit",
|
||
"https://github.com/some9000/StylePile": "https://github.com/some9000/StylePile",
|
||
"*Hey, if you have a 12Gb graphics card just laying around I’m happy to take it (:": "*Hey, if you have a 12Gb graphics card just laying around I’m happy to take it (:",
|
||
"https://github.com/some9000/StylePile.git": "https://github.com/some9000/StylePile.git",
|
||
"85b549a1 (Thu Apr 13 18:42:34 2023)": "85b549a1 (Thu Apr 13 18:42:34 2023)",
|
||
"Insert [X] anywhere in main prompt to sequentially insert values from here. Random values will be added here or to main prompt.": "Insert [X] anywhere in main prompt to sequentially insert values from here. Random values will be added here or to main prompt.",
|
||
"Insert [Y] in the final prompt <== to sequentially insert values from here (and increase prompt count). This is done after all other prompts and loops through all lines.": "Insert [Y] in the final prompt <== to sequentially insert values from here (and increase prompt count). This is done after all other prompts and loops through all lines.",
|
||
"Insert [A] anywhere in main prompt (or [X] prompt) to randomly insert values from here.": "Insert [A] anywhere in main prompt (or [X] prompt) to randomly insert values from here.",
|
||
"Insert [B] anywhere in main prompt (or [X] prompt) to randomly insert values from here.": "Insert [B] anywhere in main prompt (or [X] prompt) to randomly insert values from here.",
|
||
"Insert [C] anywhere in main prompt (or [X] prompt) to randomly insert values from here.": "Insert [C] anywhere in main prompt (or [X] prompt) to randomly insert values from here.",
|
||
"Prompt A": "Prompt A",
|
||
"Prompt B": "Prompt B",
|
||
"Acclaimed": "广受好评",
|
||
"Alternative": "Alternative",
|
||
"Amateur": "Amateur",
|
||
"Artificial": "Artificial",
|
||
"Award Winning": "Award Winning",
|
||
"Beginner": "Beginner",
|
||
"Bipolar": "Bipolar",
|
||
"Boyish": "Boyish",
|
||
"Childish": "Childish",
|
||
"Clever": "Clever",
|
||
"Clumsy": "Clumsy",
|
||
"Cognitive": "Cognitive",
|
||
"Complex": "Complex",
|
||
"Compressed": "Compressed",
|
||
"Controllable": "Controllable",
|
||
"Corrupted": "Corrupted",
|
||
"Damaged": "Damaged",
|
||
"Destroyed": "Destroyed",
|
||
"Disgusting": "Disgusting",
|
||
"Divisive": "Divisive",
|
||
"Dramatic": "Dramatic",
|
||
"Dumb": "Dumb",
|
||
"Eliminated": "Eliminated",
|
||
"Excessive": "Excessive",
|
||
"Exciting": "Exciting",
|
||
"Extreme": "Extreme",
|
||
"Feminine": "Feminine",
|
||
"Filtered": "Filtered",
|
||
"Fixated": "Fixated",
|
||
"Fixed": "Fixed",
|
||
"Foolish": "Foolish",
|
||
"Fragile": "Fragile",
|
||
"Girlish": "Girlish",
|
||
"Gorgeous": "Gorgeous",
|
||
"Groundbreaking": "Groundbreaking",
|
||
"Hated": "Hated",
|
||
"Hidden": "Hidden",
|
||
"Highly Rated": "Highly Rated",
|
||
"Horrifying": "Horrifying",
|
||
"Imaginary": "Imaginary",
|
||
"Imaginative": "Imaginative",
|
||
"Imitated": "Imitated",
|
||
"Jaded": "Jaded",
|
||
"Light hearted": "Light hearted",
|
||
"Loved": "Loved",
|
||
"Low Rated": "Low Rated",
|
||
"Magical": "Magical",
|
||
"Masculine": "Masculine",
|
||
"Masterful": "Masterful",
|
||
"Masterpiece": "Masterpiece",
|
||
"Maximalist": "Maximalist",
|
||
"Methodological": "Methodological",
|
||
"Misunderstood": "Misunderstood",
|
||
"Mundane": "Mundane",
|
||
"Overprocessed": "Overprocessed",
|
||
"Pathetic": "Pathetic",
|
||
"Photoshopped": "Photoshopped",
|
||
"Raw": "Raw",
|
||
"Recycled": "Recycled",
|
||
"Religious": "Religious",
|
||
"Rough": "Rough",
|
||
"Sacrificial": "Sacrificial",
|
||
"Sacrilegious": "Sacrilegious",
|
||
"Schematic": "Schematic",
|
||
"Sophisticated": "Sophisticated",
|
||
"Stupid": "Stupid",
|
||
"Trustworthy": "Trustworthy",
|
||
"Unbelievable": "Unbelievable",
|
||
"Understandable": "Understandable",
|
||
"Unearthed": "Unearthed",
|
||
"Unfiltered": "Unfiltered",
|
||
"Unfinished": "Unfinished",
|
||
"Unhinged": "Unhinged",
|
||
"Universal": "Universal",
|
||
"Unsuccessful": "Unsuccessful",
|
||
"Venerable": "Venerable",
|
||
"Visionary": "Visionary",
|
||
"Vivacious": "Vivacious",
|
||
"Digital Artwork": "Digital Artwork",
|
||
"3D Rendering": "3D 渲染中",
|
||
"Vector Art": "Vector Art",
|
||
"Cel shaded": "Cel shaded",
|
||
"Cel shading": "Cel shading",
|
||
"Detailed illustration": "Detailed illustration",
|
||
"Graphic novel": "Graphic novel",
|
||
"Realistic": "Realistic",
|
||
"Rough sketch": "Rough sketch",
|
||
"Screen print": "Screen print",
|
||
"Simple illustration": "Simple illustration",
|
||
"Sketched": "Sketched",
|
||
"Technical illustration": "Technical illustration",
|
||
"Ultrarealistic": "Ultrarealistic",
|
||
"Visual novel": "Visual novel",
|
||
"Amusing": "Amusing",
|
||
"Angry": "Angry",
|
||
"Cosy": "Cosy",
|
||
"Depressing": "Depressing",
|
||
"Embarrassing": "Embarrassing",
|
||
"Energetic": "Energetic",
|
||
"Evil": "Evil",
|
||
"Fearful": "Fearful",
|
||
"Frightening": "Frightening",
|
||
"Grim": "Grim",
|
||
"Guilty": "Guilty",
|
||
"Happy": "Happy",
|
||
"Hopeful": "Hopeful",
|
||
"Hopeless": "Hopeless",
|
||
"Lonely": "Lonely",
|
||
"Lustful": "Lustful",
|
||
"Peaceful": "Peaceful",
|
||
"Proud": "Proud",
|
||
"Relieving": "Relieving",
|
||
"Romantic": "Romantic",
|
||
"Sad": "Sad",
|
||
"Satisfying": "Satisfying",
|
||
"Shameful": "Shameful",
|
||
"Surprising": "Surprising",
|
||
"Agfacolor": "Agfacolor",
|
||
"Blue hue": "Blue hue",
|
||
"BW": "BW",
|
||
"Cathode tube": "Cathode tube",
|
||
"CineColor": "CineColor",
|
||
"CMYK Colors": "CMYK Colors",
|
||
"Cold Colors": "Cold Colors",
|
||
"Colorful": "Colorful",
|
||
"Colorless": "Colorless",
|
||
"Cyan hue": "Cyan hue",
|
||
"Dark hue": "Dark hue",
|
||
"Desaturated": "Desaturated",
|
||
"Dichromatic": "Dichromatic",
|
||
"Electric Colors": "Electric Colors",
|
||
"Fujifilm Superia": "Fujifilm Superia",
|
||
"Grayscale": "Grayscale",
|
||
"Green hue": "Green hue",
|
||
"High Contrast": "High Contrast",
|
||
"Hypersaturated": "Hypersaturated",
|
||
"Infrared": "Infrared",
|
||
"Kinemacolor": "Kinemacolor",
|
||
"Kodachrome": "Kodachrome",
|
||
"Kodak Ektar": "Kodak Ektar",
|
||
"Kodak Portra": "Kodak Portra",
|
||
"Low Contrast": "Low Contrast",
|
||
"Magenta hue": "Magenta hue",
|
||
"Mono Color": "Mono Color",
|
||
"Muted Colors": "Muted Colors",
|
||
"Offset print": "Offset print",
|
||
"One Color": "One Color",
|
||
"Oversaturated": "Oversaturated",
|
||
"Pastel Colors": "Pastel Colors",
|
||
"Polychromatic": "Polychromatic",
|
||
"Primary Colors": "Primary Colors",
|
||
"Provia": "Provia",
|
||
"Purple hue": "Purple hue",
|
||
"Red hue": "Red hue",
|
||
"Saturated": "Saturated",
|
||
"Single Color": "Single Color",
|
||
"Technicolor": "Technicolor",
|
||
"Velvia": "Velvia",
|
||
"Vivid Colors": "Vivid Colors",
|
||
"Warm Colors": "Warm Colors",
|
||
"Yellow hue": "Yellow hue",
|
||
"Portraits": "Portraits",
|
||
"Feminine portrait": "Feminine portrait",
|
||
"Masculine portrait": "Masculine portrait",
|
||
"WaiFusion": "WaiFusion",
|
||
"Horrible Monsters": "Horrible Monsters",
|
||
"Robots": "Robots",
|
||
"Retrofuturism": "Retrofuturism",
|
||
"Propaganda": "Propaganda",
|
||
"Landscapes": "Landscapes",
|
||
"Adam Hughes": "Adam Hughes",
|
||
"Adi Granov": null,
|
||
"Adolf Kosarek": null,
|
||
"Adolph Von Menzel": "Adolph Von Menzel",
|
||
"Akihiko Yoshida": "Akihiko Yoshida",
|
||
"Al Williamson": "Al Williamson",
|
||
"Albert Lynch": "Albert Lynch",
|
||
"Alberto Seveso": "Alberto Seveso",
|
||
"Alberto Vargas": "Alberto Vargas",
|
||
"Alena Aenami": "Alena Aenami",
|
||
"Alex Andreev": "Alex Andreev",
|
||
"Alex Grey": "Alex Grey",
|
||
"Alex Ross": "Alex Ross",
|
||
"Alex Toth": "Alex Toth",
|
||
"Alexander Archipenko": "Alexander Archipenko",
|
||
"Alexander Jansson": "Alexander Jansson",
|
||
"Alfred Steiglitz": "Alfred Steiglitz",
|
||
"Alphonse Mucha": "Alphonse Mucha",
|
||
"Alvar Aalto": "Alvar Aalto",
|
||
"Anato Finnstark": "Anato Finnstark",
|
||
"Andre Masson": "Andre Masson",
|
||
"Andrew Loomis": "Andrew Loomis",
|
||
"Andy Fairhurst": "Andy Fairhurst",
|
||
"Anna Dittman": "Anna Dittman",
|
||
"Apollonia Saintclair": "Apollonia Saintclair",
|
||
"Artgerm": "Artgerm",
|
||
"Arthur Adams": "Arthur Adams",
|
||
"Arthur Rackham": "Arthur Rackham",
|
||
"Aubrey Beardsley": "Aubrey Beardsley",
|
||
"Austin Briggs": "Austin Briggs",
|
||
"Ayami Kojima": "Ayami Kojima",
|
||
"Barbara Kruger": "Barbara Kruger",
|
||
"Bastien Lecouffe Deharme": "Bastien Lecouffe Deharme",
|
||
"Beeple": "Beeple",
|
||
"Bill Sienkiewicz": "Bill Sienkiewicz",
|
||
"Bill Ward": "Bill Ward",
|
||
"Bo Bartlett": "Bo Bartlett",
|
||
"Bob Byerley": "Bob Byerley",
|
||
"Bob Eggleton": "Bob Eggleton",
|
||
"Bob Haberfield": "Bob Haberfield",
|
||
"Bob Peak": "Bob Peak",
|
||
"Boris Vallejo": "Boris Vallejo",
|
||
"Brandon Woelfel": "Brandon Woelfel",
|
||
"Brian Bolland": "Brian Bolland",
|
||
"Brian Froud": "Brian Froud",
|
||
"Bruce Pennington": "Bruce Pennington",
|
||
"Bryan Hitch": "Bryan Hitch",
|
||
"Butcher Billy": "Butcher Billy",
|
||
"Camille Walala": "Camille Walala",
|
||
"Carel Willink": "Carel Willink",
|
||
"Carmine Infantino": "Carmine Infantino",
|
||
"Carrie Ann Baade": "Carrie Ann Baade",
|
||
"Casey Baugh": "Casey Baugh",
|
||
"Casey Weldon": "Casey Weldon",
|
||
"Cedric Peyravernay": "Cedric Peyravernay",
|
||
"Charles Adams": "Charles Adams",
|
||
"Charlie Bowater": "Charlie Bowater",
|
||
"Chesley Bonestell": "Chesley Bonestell",
|
||
"Chris Foss": "Chris Foss",
|
||
"Christopher Balaskas": "Christopher Balaskas",
|
||
"Claude Monet": "Claude Monet",
|
||
"Clive Barker": "Clive Barker",
|
||
"Coles Phillips": "Coles Phillips",
|
||
"Conrad Roset": "Conrad Roset",
|
||
"Curt Swan": "Curt Swan",
|
||
"Dan Mumford": "Dan Mumford",
|
||
"Diego Rivera": "Diego Rivera",
|
||
"Don Bergland": "Don Bergland",
|
||
"Donato Giancola": "Donato Giancola",
|
||
"Dorina Costras": "Dorina Costras",
|
||
"E.H. Shepard": "E.H. Shepard",
|
||
"Earl Norem": "Earl Norem",
|
||
"Earle Bergey": "Earle Bergey",
|
||
"Earnst Haeckel": "Earnst Haeckel",
|
||
"Ed Emshwiller": "Ed Emshwiller",
|
||
"Ed Mell": "Ed Mell",
|
||
"Edith Head": "Edith Head",
|
||
"Edmund Dulac": "Edmund Dulac",
|
||
"Edvard Munch": "Edvard Munch",
|
||
"Ellen Jewett": "Ellen Jewett",
|
||
"Emily Balivet": "Emily Balivet",
|
||
"Enki Bilal": "Enki Bilal",
|
||
"Eric Kennington": "Eric Kennington",
|
||
"Erin Hanson": "Erin Hanson",
|
||
"Ernie Barnes": "Ernie Barnes",
|
||
"Esao Andrews": "Esao Andrews",
|
||
"Esteban Maroto": "Esteban Maroto",
|
||
"Ethan Van Sciver": "Ethan Van Sciver",
|
||
"Eve Ventrue": "Eve Ventrue",
|
||
"Eyvind Earle": "Eyvind Earle",
|
||
"F. Scott Hess": "F. Scott Hess",
|
||
"Fernand Khnopff": "Fernand Khnopff",
|
||
"Filippino Lippi": "Filippino Lippi",
|
||
"Frank Bowling": "Frank Bowling",
|
||
"Frank Cadogan Cowper": "Frank Cadogan Cowper",
|
||
"Frank Frazetta": "Frank Frazetta",
|
||
"Frank Tenney Johnson": "Frank Tenney Johnson",
|
||
"Frank Xavier": "Frank Xavier",
|
||
"Franklin Booth": "Franklin Booth",
|
||
"Fred Calleri": "Fred Calleri",
|
||
"Fujishima Takeji": "Fujishima Takeji",
|
||
"Gabriel Von Max": "Gabriel Von Max",
|
||
"Gediminas Pranckevicius": "Gediminas Pranckevicius",
|
||
"Gene Colan": "Gene Colan",
|
||
"Geof Darrow": "Geof Darrow",
|
||
"Georgia O’Keeffe": "Georgia O’Keeffe",
|
||
"Georgy Kurasov": "Georgy Kurasov",
|
||
"Gerald Brom": "Gerald Brom",
|
||
"Gertrude Abercrombie": "Gertrude Abercrombie",
|
||
"Gil Elvgren": "Gil Elvgren",
|
||
"Gil Kane": "Gil Kane",
|
||
"Greg Manchess": "Greg Manchess",
|
||
"Greg Rutkowski": "Greg Rutkowski",
|
||
"Gustaf Tenggren": "Gustaf Tenggren",
|
||
"Gustav Klimt": "Gustav Klimt",
|
||
"H.P. Lovecraft": "H.P. Lovecraft",
|
||
"H.R. Giger": "H.R. Giger",
|
||
"Hannah Yata": "Hannah Yata",
|
||
"Harrison Fisher": "Harrison Fisher",
|
||
"Harry Clarke": "Harry Clarke",
|
||
"Henri Matisse": "Henri Matisse",
|
||
"Henry Clive": "Henry Clive",
|
||
"Herbert James Gunn": "Herbert James Gunn",
|
||
"Hikari Shimoda": "Hikari Shimoda",
|
||
"Hiroshi Nagai": "Hiroshi Nagai",
|
||
"Hiroshi Yoshida": "Hiroshi Yoshida",
|
||
"Hsiao-Ron Cheng": "Hsiao-Ron Cheng",
|
||
"Huang Guangjian": "Huang Guangjian",
|
||
"Ian Kennedy": "Ian Kennedy",
|
||
"Igor Morski": "Igor Morski",
|
||
"Igor Zenin": "Igor Zenin",
|
||
"Ilya Kuvshinov": "Ilya Kuvshinov",
|
||
"Ilya Repin": "Ilya Repin",
|
||
"Ivan Aivazovsky": "Ivan Aivazovsky",
|
||
"Ivan Bilibin": "Ivan Bilibin",
|
||
"J.C. Leyendecker": "J.C. Leyendecker",
|
||
"Jacek Yerka": "Jacek Yerka",
|
||
"Jack Kirby": "Jack Kirby",
|
||
"Jackson Pollock": "Jackson Pollock",
|
||
"James C. Christensen": "James C. Christensen",
|
||
"James Gilleard": "James Gilleard",
|
||
"James Gurney": "James Gurney",
|
||
"James Jean": "James Jean",
|
||
"Jan Hendrik Weissenbruch": "Jan Hendrik Weissenbruch",
|
||
"Jan Urschel": "Jan Urschel",
|
||
"Jasmine Becket-Griffith": "Jasmine Becket-Griffith",
|
||
"Jason Edmiston": "Jason Edmiston",
|
||
"Jay Anacleto": "Jay Anacleto",
|
||
"Jean Giraud": "Jean Giraud",
|
||
"Jeannette Guichard-Bunel": "Jeannette Guichard-Bunel",
|
||
"Jeffrey Smith": "Jeffrey Smith",
|
||
"Jeremiah Ketner": "Jeremiah Ketner",
|
||
"Jeremy Lipking": "Jeremy Lipking",
|
||
"Jian Chong Min": "Jian Chong Min",
|
||
"Jim Burns": "Jim Burns",
|
||
"Jim Holland": "Jim Holland",
|
||
"Joao Ruas": "Joao Ruas",
|
||
"Joe Jusko": "Joe Jusko",
|
||
"Joe Kubert": "Joe Kubert",
|
||
"Johan Heinrich Fussli": "Johan Heinrich Fussli",
|
||
"John Howe": "John Howe",
|
||
"John Lavery": "John Lavery",
|
||
"John Philip Falter": "John Philip Falter",
|
||
"John Romita Jr": "John Romita Jr",
|
||
"John Singer Sargent": "John Singer Sargent",
|
||
"John T. Biggers": "John T. Biggers",
|
||
"Jon Whitcomb": "Jon Whitcomb",
|
||
"Joop Polder": "Joop Polder",
|
||
"Joseph Leyendecker": "Joseph Leyendecker",
|
||
"Juan Gris": "Juan Gris",
|
||
"Julian Onderdonk": "Julian Onderdonk",
|
||
"Junji Ito": "Junji Ito",
|
||
"Kadir Nelson": "Kadir Nelson",
|
||
"Karel Thole": "Karel Thole",
|
||
"Karol Bak": "Karol Bak",
|
||
"Kawase Hasui": "Kawase Hasui",
|
||
"Kaws": "Kaws",
|
||
"Kehinde Wiley": "Kehinde Wiley",
|
||
"Kelly McKernan": "Kelly McKernan",
|
||
"Koho Shoda": "Koho Shoda",
|
||
"Krenz Cushart": "Krenz Cushart",
|
||
"Lee Bogle": "Lee Bogle",
|
||
"Leonardo Coccorante": "Leonardo Coccorante",
|
||
"Leonid Afremov": "Leonid Afremov",
|
||
"Lisa Frank": "Lisa Frank",
|
||
"Loish": "Loish",
|
||
"Lyubov Popova": "Lyubov Popova",
|
||
"M.C. Escher": "M.C. Escher",
|
||
"Makoto Shinkai": "Makoto Shinkai",
|
||
"Marc Chagall": "Marc Chagall",
|
||
"Marc Simonetti": "Marc Simonetti",
|
||
"Mark Ryden": "Mark Ryden",
|
||
"Martin Ansin": "Martin Ansin",
|
||
"Martin Schongauer": "Martin Schongauer",
|
||
"Mary Jane Ansell": "Mary Jane Ansell",
|
||
"Masamune Shirow": "Masamune Shirow",
|
||
"Mati Klarwein": "Mati Klarwein",
|
||
"Maxfield Parrish": "Maxfield Parrish",
|
||
"Mead Schaeffer": "Mead Schaeffer",
|
||
"Michael Cheval": "Michael Cheval",
|
||
"Michael Whelan": "Michael Whelan",
|
||
"Miho Hirano": "Miho Hirano",
|
||
"Mike Allred": "Mike Allred",
|
||
"Mike Mignola": "Mike Mignola",
|
||
"Mike Winkelmann": "Mike Winkelmann",
|
||
"Miles Aldridge": "Miles Aldridge",
|
||
"Milton Caniff": "Milton Caniff",
|
||
"Moebius": "Moebius",
|
||
"Mort Kunstler": "Mort Kunstler",
|
||
"Neal Adams": "Neal Adams",
|
||
"Nikolai Astrup": "Nikolai Astrup",
|
||
"Njideka Akunyili Crosby": "Njideka Akunyili Crosby",
|
||
"Norman Rockwell": "Norman Rockwell",
|
||
"P.A. Works": "P.A. Works",
|
||
"Pang Xunqin": "Pang Xunqin",
|
||
"Paul Cadmus": "Paul Cadmus",
|
||
"Paul Lehr": "Paul Lehr",
|
||
"Paul Signac": "Paul Signac",
|
||
"Peter Elson": "Peter Elson",
|
||
"Peter Gric": "Peter Gric",
|
||
"Peter Mohrbacher": "Peter Mohrbacher",
|
||
"Peter Wileman": "Peter Wileman",
|
||
"Petros Afshar": "Petros Afshar",
|
||
"Phil Noto": "Phil Noto",
|
||
"Philippe Druillet": "Philippe Druillet",
|
||
"Rafael Albuquerque": "Rafael Albuquerque",
|
||
"Ralph Gibson": "Ralph Gibson",
|
||
"Raymond Swanland": "Raymond Swanland",
|
||
"RHADS": "RHADS",
|
||
"Richard Avedon": "Richard Avedon",
|
||
"Richard Corben": "Richard Corben",
|
||
"Richard Lindner": "Richard Lindner",
|
||
"Rob Gonsalves": "Rob Gonsalves",
|
||
"Robert Bissell": "Robert Bissell",
|
||
"Robert McCall": "Robert McCall",
|
||
"Roberto Matta": "Roberto Matta",
|
||
"Rolf Armstrong": "Rolf Armstrong",
|
||
"Romero Britto": "Romero Britto",
|
||
"Ron Miller": "Ron Miller",
|
||
"Ross Tran": "Ross Tran",
|
||
"RossDraws": "RossDraws",
|
||
"Roy Lichtenstein": "Roy Lichtenstein",
|
||
"Ruan Jia": "Ruan Jia",
|
||
"Ryan Pancoast": "Ryan Pancoast",
|
||
"Ryohei Hase": "Ryohei Hase",
|
||
"Sabbas Apterus": "Sabbas Apterus",
|
||
"Sachin Teng": "Sachin Teng",
|
||
"Salvador Dali": "Salvador Dali",
|
||
"Sam bosma": "Sam bosma",
|
||
"Sam Gilliam": "Sam Gilliam",
|
||
"Scott Listfield": "Scott Listfield",
|
||
"Shigenori Soejima": "Shigenori Soejima",
|
||
"Shinji Aramaki": "Shinji Aramaki",
|
||
"Simon Bisley": "Simon Bisley",
|
||
"Simon Stalenhag": "Simon Stalenhag",
|
||
"Siya Oum": "Siya Oum",
|
||
"Stanhope Forbes": "Stanhope Forbes",
|
||
"Stanislaw Wyspianski": "Stanislaw Wyspianski",
|
||
"Stephan Martinière": "Stephan Martinière",
|
||
"Steve Ditko": "Steve Ditko",
|
||
"Syd Mead": "Syd Mead",
|
||
"Takashi Murakami": "Takashi Murakami",
|
||
"Tara McPherson": "Tara McPherson",
|
||
"Tarsila do Amaral": "Tarsila do Amaral",
|
||
"Ted Nasmith": "Ted Nasmith",
|
||
"Theo Van Rysselberghe": "Theo Van Rysselberghe",
|
||
"Thomas Blackshear": "Thomas Blackshear",
|
||
"Thomas Kinkade": "Thomas Kinkade",
|
||
"Thomas Shotter Boys": "Thomas Shotter Boys",
|
||
"Todd McFarlane": "Todd McFarlane",
|
||
"Tom Bagshaw": "Tom Bagshaw",
|
||
"Tom Lovell": "Tom Lovell",
|
||
"Tom Whalen": "Tom Whalen",
|
||
"Tomer Hanuka": "Tomer Hanuka",
|
||
"Trevor Brown": "Trevor Brown",
|
||
"Trina Robbins": "Trina Robbins",
|
||
"Tsutomu Nihei": "Tsutomu Nihei",
|
||
"Ulisse Aldrovandi": "Ulisse Aldrovandi",
|
||
"Umberto Boccioni": "Umberto Boccioni",
|
||
"Vasily Vereschagin": "Vasily Vereschagin",
|
||
"Victo Ngai": "Victo Ngai",
|
||
"Victor Nizovtsev": "Victor Nizovtsev",
|
||
"Vincent DiFate": "Vincent DiFate",
|
||
"Vittorio Reggianini": "Vittorio Reggianini",
|
||
"W. Heath Robinson": "W. Heath Robinson",
|
||
"Wadim Kashin": "Wadim Kashin",
|
||
"Walter Crane": "Walter Crane",
|
||
"Wangechi Mutu": "Wangechi Mutu",
|
||
"Warwick Goble": "Warwick Goble",
|
||
"Wayne Barlowe": "Wayne Barlowe",
|
||
"Will Barnet": "Will Barnet",
|
||
"William Dodge": "William Dodge",
|
||
"William Eggleston": "William Eggleston",
|
||
"William Holbrook Beard": "William Holbrook Beard",
|
||
"William McGregor Paxton": "William McGregor Paxton",
|
||
"WLOP": "WLOP",
|
||
"Yanjun Cheng": "Yanjun Cheng",
|
||
"Yoji Shinkawa": "Yoji Shinkawa",
|
||
"Yoshitaka Amano": "Yoshitaka Amano",
|
||
"Zdzislaw Beksinski": "Zdzislaw Beksinski",
|
||
"50s Art": "50年代艺术风格",
|
||
"60s Art": "60 年代艺术风格",
|
||
"70s Art": "70 年代艺术风格",
|
||
"80s Art": "80 年代艺术风格",
|
||
"Abstract Art": "抽象艺术",
|
||
"Abstract Expressionism": "抽象表现主义",
|
||
"Abstract Illusionism": "抽象幻想主义",
|
||
"Academism": "学院主义（学院派）",
|
||
"Action Painting": "Action Painting",
|
||
"Aestheticism": "唯美主义",
|
||
"Afrofuturism": "Afrofuturism",
|
||
"American Scene Painting": "American Scene Painting",
|
||
"Art Brut": "Art Brut",
|
||
"Art Deco": "Art Deco",
|
||
"Art Nouveau": "Art Nouveau",
|
||
"Art Photography": "Art Photography",
|
||
"Arts and Crafts Movement": "Arts and Crafts Movement",
|
||
"Ascii Art": "Ascii Art",
|
||
"Ashcan School": "Ashcan School",
|
||
"Australian Tonalism": "Australian Tonalism",
|
||
"Baroque Art": "Baroque Art",
|
||
"Bauhaus Art": "Bauhaus Art",
|
||
"Berlin Secession": "Berlin Secession",
|
||
"CGI Art": "CGI Art",
|
||
"Classical Realism": "Classical Realism",
|
||
"Classicism Art": "Classicism Art",
|
||
"Cloisonnism": "Cloisonnism",
|
||
"Computer Art": "Computer Art",
|
||
"Conceptual Art": "Conceptual Art",
|
||
"Constructivism Art": "Constructivism Art",
|
||
"Crystal Cubism": "Crystal Cubism",
|
||
"Cubism": "Cubism",
|
||
"Cubo-Futurism": "Cubo-Futurism",
|
||
"Cutester Art": "Cutester Art",
|
||
"Cybergoth Art": "Cybergoth Art",
|
||
"Cyberpunk Art": "Cyberpunk Art",
|
||
"Dada Art": "Dada Art",
|
||
"Dark Wave Art": "Dark Wave Art",
|
||
"Emo Art": "Emo Art",
|
||
"Expressionism": "Expressionism",
|
||
"Fauvism": "Fauvism",
|
||
"Figurative Art": "Figurative Art",
|
||
"Fluxus Art": "Fluxus Art",
|
||
"Folk Art": "Folk Art",
|
||
"Funk Art": "Funk Art",
|
||
"Futurism": "Futurism",
|
||
"Geometric Abstract Art": "Geometric Abstract Art",
|
||
"Glitch Art": "Glitch Art",
|
||
"Graffiti Street Art": "Graffiti Street Art",
|
||
"Grunge Art": "Grunge Art",
|
||
"Gutai Group": "Gutai Group",
|
||
"Hardcore Art": "Hardcore Art",
|
||
"Harlem Renaissance": "Harlem Renaissance",
|
||
"Health Goth Art": "Health Goth Art",
|
||
"Heidelberg School": "Heidelberg School",
|
||
"Hippie Art": "Hippie Art",
|
||
"Hipster Art": "Hipster Art",
|
||
"Impressionism": "Impressionism",
|
||
"Industrial Art": "Industrial Art",
|
||
"Kinetic Pointillism": "Kinetic Pointillism",
|
||
"Land Art": "Land Art",
|
||
"Lowbrow Art": "Lowbrow Art",
|
||
"Lyrical Abstraction": "Lyrical Abstraction",
|
||
"Magical Realism": "Magical Realism",
|
||
"Mannerism Art": "Mannerism Art",
|
||
"Memecore Ar": "Memecore Ar",
|
||
"Metaphysical Painting": "Metaphysical Painting",
|
||
"Mingei": "Mingei",
|
||
"Minimalism Art": "Minimalism Art",
|
||
"Modern Art": "Modern Art",
|
||
"Modern European Ink Painting": "Modern European Ink Painting",
|
||
"Modernism Art": "Modernism Art",
|
||
"Naive Art": "Naive Art",
|
||
"Neo Dada Art": "Neo Dada Art",
|
||
"Neo-Dadaism Art": "Neo-Dadaism Art",
|
||
"Neo-Expressionism": "Neo-Expressionism",
|
||
"Neo-Fauvism": "Neo-Fauvism",
|
||
"Neo-Primitivism": "Neo-Primitivism",
|
||
"Neo": "Neo",
|
||
"Neoclassicism": "Neoclassicism",
|
||
"Neogothic Art": "Neogothic Art",
|
||
"New Wave Art": "New Wave Art",
|
||
"Normcore Art": "Normcore Art",
|
||
"Nu Goth Art": "Nu Goth Art",
|
||
"Orphism": "Orphism",
|
||
"Panfuturism": "Panfuturism",
|
||
"Pastel Goth Art": "Pastel Goth Art",
|
||
"Photorealism": "Photorealism",
|
||
"Post-Impressionism": "Post-Impressionism",
|
||
"Pre-Raphaelitism": "Pre-Raphaelitism",
|
||
"Primitivism Art": "Primitivism Art",
|
||
"Primitivism": "Primitivism",
|
||
"Private Press": "Private Press",
|
||
"Process Art": "Process Art",
|
||
"Psytrance Art": "Psytrance Art",
|
||
"Qajar Art": "Qajar Art",
|
||
"Queercore Art": "Queercore Art",
|
||
"Realism": "Realism",
|
||
"Remodernism": "Remodernism",
|
||
"Rococo": "Rococo",
|
||
"Seapunk Art": "Seapunk Art",
|
||
"Serial Art": "Serial Art",
|
||
"Shin Hanga": "Shin Hanga",
|
||
"Solarpunk Art": "Solarpunk Art",
|
||
"Steampunk Art": "Steampunk Art",
|
||
"Street Art": "Street Art",
|
||
"Suprematism": "Suprematism",
|
||
"Surrealism Art": "Surrealism Art",
|
||
"Synthetism": "Synthetism",
|
||
"Sōsaku Hanga": "Sōsaku Hanga",
|
||
"Temp": "Temp",
|
||
"Tonalism": "Tonalism",
|
||
"Toyism Art": "Toyism Art",
|
||
"Ukiyo-E": "Ukiyo-E",
|
||
"Vanitas": "Vanitas",
|
||
"Vaporwave Art": "Vaporwave Art",
|
||
"Victorian Gothic Art": "Victorian Gothic Art",
|
||
"Vorticism Art": "Vorticism Art",
|
||
"Yuccie Art": "Yuccie Art",
|
||
"a1111-sd-webui-tagcomplete": "a1111-sd-webui-tagcomplete",
|
||
"https://github.com/DominikDoom/a1111-sd-webui-tagcomplete.git": "https://github.com/DominikDoom/a1111-sd-webui-tagcomplete.git",
|
||
"prompt-fusion-extension": "prompt-fusion-extension",
|
||
"https://github.com/ljleb/prompt-fusion-extension.git": "https://github.com/ljleb/prompt-fusion-extension.git",
|
||
"Create aesthetic embedding": "建立美學嵌入",
|
||
"Open for Clip Aesthetic!": "打開以調整 CLIP 美學！",
|
||
"Aesthetic weight": "美學權重",
|
||
"Aesthetic steps": "美術風格疊代步數",
|
||
"Aesthetic learning rate": "美學學習率",
|
||
"Slerp interpolation": "球面線性插值角度",
|
||
"Aesthetic imgs embedding": "美學圖集嵌入",
|
||
"Aesthetic text for imgs": "該圖集的美學描述",
|
||
"Slerp angle": "球面線性插值角度",
|
||
"Is negative text": "是反向提示詞",
|
||
"Create an aesthetic embedding out of any number of images": "從任意數量的圖像中建立美學嵌入",
|
||
"Create images embedding": "建立圖集嵌入",
|
||
"stable-diffusion-webui-aesthetic-gradients": "美术风格梯度",
|
||
"This text is used to rotate the feature space of the imgs embs": "此文本用於旋轉圖集嵌入的特徵空間",
|
||
"https://github.com/AUTOMATIC1111/stable-diffusion-webui-aesthetic-gradients.git": "https://github.com/AUTOMATIC1111/stable-diffusion-webui-aesthetic-gradients.git",
|
||
"Seed travel": "種子變遷",
|
||
"Destination seed(s) (Comma separated)": "目標種子（逗號分割）",
|
||
"Only use Random seeds (Unless comparing paths)": "只用隨機種子（除非需要對比變遷軌跡）",
|
||
"Number of random seed(s)": "隨機種子數量",
|
||
"Compare paths (Separate travels from 1st seed to each destination)": "對比變遷軌跡（從第一個種子分別變遷到每一個目標種子）",
|
||
"Steps (Number of images between each seed)": "步數（每個種子之間的圖像數量）",
|
||
"Loop back to initial seed": "再變遷回初始種子",
|
||
"Save results as video": "儲存結果為影片",
|
||
"Frames per second": "每秒多少幀",
|
||
"Number of frames for lead in/out": "導入／導出幀數",
|
||
"Bump seed (If > 0 do a Compare Paths but only one image. No video will be generated.)": "提高種子值（如果大於 0，則進行對比變遷軌跡，但僅產生一張圖像而非影片。）",
|
||
"Use cache": "使用快取",
|
||
"Show generated images in ui": "在用戶介面上顯示產生了的圖像",
|
||
"Interpolation rate": "插值速率",
|
||
"Hug-the-middle": "保留核心（Hug-the-middle）",
|
||
"Slow start": "緩慢開始（Slow start）",
|
||
"Quick start": "快速開始（Quick start）",
|
||
"Rate strength": "速率強度",
|
||
"Allow the default Euler a Sampling method. (Does not produce good results)": "允許使用默認的 Eular a 採樣方法.（通常不會產生好的結果）",
|
||
"seed_travel": "seed_travel",
|
||
"https://github.com/yownas/seed_travel.git": "https://github.com/yownas/seed_travel.git",
|
||
"SD-latent-mirroring": "SD-latent-mirroring",
|
||
"https://github.com/dfaker/SD-latent-mirroring.git": "https://github.com/dfaker/SD-latent-mirroring.git",
|
||
"Shift attention": "轉移注意力",
|
||
"https://github.com/yownas/shift-attention.git": "https://github.com/yownas/shift-attention.git",
|
||
"Composable Lora": "Composable Lora",
|
||
"stable-diffusion-webui-composable-lora": "stable-diffusion-webui-composable-lora",
|
||
"https://github.com/a2569875/stable-diffusion-webui-composable-lora": "https://github.com/a2569875/stable-diffusion-webui-composable-lora",
|
||
"caeae16a (Fri Jun 23 04:35:21 2023)": "caeae16a (Fri Jun 23 04:35:21 2023)",
|
||
"Composable LoRA with step": "啟用在迭代步數上使用LoRA或動態權重的功能",
|
||
"Plot the LoRA weight in all steps": "產生LoRA在每一個迭代步數的權重的圖表",
|
||
"Don't use LoRA in uc if there're no subprompts": "如果沒有使用「AND」語法不要在反向提示詞中使用LoRA",
|
||
"Error! Composable Lora install failed! Please reinstall composable_lora and restart the WebUI.": "錯誤! Composable Lora安裝發生問題。請嘗試重新安裝Composable Lora並重新啟動WebUI和終端機。",
|
||
"Tiled Diffusion": "Tiled Diffusion",
|
||
"Tiled VAE": "分塊 VAE",
|
||
"multidiffusion-upscaler-for-automatic1111": "multidiffusion-upscaler-for-automatic1111",
|
||
"https://github.com/pkuliyi2015/multidiffusion-upscaler-for-automatic1111.git": "https://github.com/pkuliyi2015/multidiffusion-upscaler-for-automatic1111.git",
|
||
"MultiDiffusion": "MultiDiffusion",
|
||
"Causalize layers": "Causalize layers",
|
||
"stable-diffusion-webui-two-shot": "stable-diffusion-webui-two-shot",
|
||
"https://github.com/opparco/stable-diffusion-webui-two-shot.git": "https://github.com/opparco/stable-diffusion-webui-two-shot.git",
|
||
"✕": "✕",
|
||
"[NPW] Weight": "[NPW] 權重",
|
||
"stable-diffusion-NPW": "stable-diffusion-NPW",
|
||
"https://github.com/muerrilla/stable-diffusion-NPW": "https://github.com/muerrilla/stable-diffusion-NPW",
|
||
"Gustavosta/MagicPrompt-Stable-Diffusion": "Gustavosta/MagicPrompt-Stable-Diffusion",
|
||
"daspartho/prompt-extend": "daspartho/prompt-extend",
|
||
"succinctly/text2image-prompt-generator": "succinctly/text2image-prompt-generator",
|
||
"microsoft/Promptist": "microsoft/Promptist",
|
||
"AUTOMATIC/promptgen-lexart": "AUTOMATIC/promptgen-lexart",
|
||
"AUTOMATIC/promptgen-majinai-safe": "AUTOMATIC/promptgen-majinai-safe",
|
||
"AUTOMATIC/promptgen-majinai-unsafe": "AUTOMATIC/promptgen-majinai-unsafe",
|
||
"kmewhort/stable-diffusion-prompt-bolster": "kmewhort/stable-diffusion-prompt-bolster",
|
||
"Gustavosta/MagicPrompt-Dalle": "Gustavosta/MagicPrompt-Dalle",
|
||
"Ar4ikov/gpt2-650k-stable-diffusion-prompt-generator": "Ar4ikov/gpt2-650k-stable-diffusion-prompt-generator",
|
||
"Ar4ikov/gpt2-medium-650k-stable-diffusion-prompt-generator": "Ar4ikov/gpt2-medium-650k-stable-diffusion-prompt-generator",
|
||
"crumb/bloom-560m-RLHF-SD2-prompter-aesthetic": "crumb/bloom-560m-RLHF-SD2-prompter-aesthetic",
|
||
"Meli/GPT2-Prompt": "Meli/GPT2-Prompt",
|
||
"DrishtiSharma/StableDiffusion-Prompt-Generator-GPT-Neo-125M": "DrishtiSharma/StableDiffusion-Prompt-Generator-GPT-Neo-125M",
|
||
"Magic Prompt batch size": "魔法提示詞批次大小",
|
||
"{{1-$$and$$__adjective__}}": "{{1-3$$and$$__adjective__}}",
|
||
"__<folder>/mywildcards__": "__<folder>/mywildcards__",
|
||
"I love red roses": "I love red roses",
|
||
"I love {{ choice('red', 'blue', 'green') }} roses": "I love {{ choice('red', 'blue', 'green') }} roses",
|
||
"{% for colour in ['red', 'blue', 'green'] %}\n {% prompt %}I love {{ colour }} roses{% endprompt %}\n {% endfor %}": "{% for colour in ['red', 'blue', 'green'] %}\n {% prompt %}I love {{ colour }} roses{% endprompt %}\n {% endfor %}",
|
||
"{% for colour in wildcard(\"__colours__\") %}\n {% prompt %}I love {{ colour }} roses{% endprompt %}\n {% endfor %}": "{% for colour in wildcard(\"__colours__\") %}\n {% prompt %}I love {{ colour }} roses{% endprompt %}\n {% endfor %}",
|
||
"Conditionals": "條件",
|
||
"{% for colour in [\"red\", \"blue\", \"green\"] %}\n {% if colour == \"red\"}\n {% prompt %}I love {{ colour }} roses{% endprompt %}\n {% else %}\n {% prompt %}I hate {{ colour }} roses{% endprompt %}\n {% endif %}\n {% endfor %}": "{% for colour in [\"red\", \"blue\", \"green\"] %}\n {% if colour == \"red\"}\n {% prompt %}I love {{ colour }} roses{% endprompt %}\n {% else %}\n {% prompt %}I hate {{ colour }} roses{% endprompt %}\n {% endif %}\n {% endfor %}",
|
||
"I hate blue roses": "I hate blue roses",
|
||
"I hate green roses": "I hate green roses",
|
||
"Write raw prompt to image": "將提示詞寫入圖像",
|
||
"Write prompts to file": "將提示詞寫入檔案",
|
||
"3. Use the wildcard in your script by typing the name of the file or copying the text from the Wildcards file text box": "3. 在提示詞中使用萬用字元，輸入檔案名稱或從萬用字元檔案檔案編輯器中複製文字。",
|
||
"artists": "藝術家",
|
||
"devilkkw": "devilkkw",
|
||
"jumbo": "jumbo",
|
||
"nai": "nai",
|
||
"nsp": "nsp",
|
||
"parrotzone": "parrotzone",
|
||
"Limit Jinja prompts: Limit the number of prompts to batch_count * batch_size. The default is to generate batch_count * barch_size * number of prompts generated by Jinja": "將提示的數量限制為 batch_count * batch_size。預設是產生 batch_count * batch_size * Jinja 產生的提示數量。",
|
||
"sd-dynamic-prompts": "sd-dynamic-prompts",
|
||
"https://github.com/adieyal/sd-dynamic-prompts.git": "https://github.com/adieyal/sd-dynamic-prompts.git",
|
||
"The number of prompts to generate per batch. Increasing this can speed up prompt generation at the expense of slightly increased VRAM usage.": "每個批次要產生的提示詞數量。增加此數量可以加快提示詞產生速度，但會略微增加 VRAM 的使用。",
|
||
"Write the prompt template into the image metadata": "將提示詞範本寫入圖片數據。",
|
||
"The generated file is a slugified version of the prompt and can be found in the same directory as the generated images.\nE.g. in ./outputs/txt2img-images/.": "產生的檔案包含處理過的提示詞，和產生的圖像在同一目錄。\n例如 ./outputs/txt2img-images/",
|
||
"Generate all possible prompt combinations.": "產生所有可能的提示詞組合。",
|
||
"Use the same seed for all prompts in this batch": "對這批次中的所有提示詞使用相同的種子",
|
||
"If this is set, then random prompts are generated, even if the seed is the same.": "如果設定了此項，則會產生隨機提示詞，即使種子相同。",
|
||
"Disable image generation. Useful if you only want to generate text prompts. (1 image will still be generated to keep Auto1111 happy.).": "停用圖像產生。這很有用，如果你只想產生文字提示。（仍將生成 1 張圖像以使 Auto1111 保持運行）",
|
||
"Add emphasis to a randomly selected keyword in the prompt.": "在提示詞中隨機選擇一個關鍵字加上強調符",
|
||
"Write template into image metadata.": "將範本寫入圖像中繼資料。",
|
||
"Note: Each model will download between 300mb and 1.4gb of data on first use.": "註記：每個模型第一次使用時會下載 300MB 到 1.4GB 的檔案。",
|
||
"default variables: in \\{\\}, like \\{init_mask\\}, \\{video_mask\\}, \\{everywhere\\}": "默认变量：\\{\\}，比如 \\{init_mask\\}, \\{video_mask\\}, \\{everywhere\\}",
|
||
"Enter your trigger word. EX: character_name_\\(title of novel\\)": "输入触发词。例如：character_name_\\(title of novel\\)",
|
||
"For advanced users, you can create a permanent file in \\OneButtonPrompt\\userfiles\\ called antilist.csv": "对于专业用户，可以在 \\OneButtonPrompt\\userfiles\\ 中创建一个永久文件，命名为 antilist.csv",
|
||
"Insert [\\Author Name] & [\\Model Name] & [\\Model Name\\Version Name] as sub folder options": "插入 [\\作者名称] & [\\模型名称] & [\\模型名称\\版本名称] 作为子文件夹选项",
|
||
"Insert [\\Model Name] & [\\Model Name\\Version Name] as sub folder options": "插入 [\\模型名称] & [\\模型名称\\版本名称] 作为子文件夹选项",
|
||
"Instead it will pick up all files in the \\upscale_me\\ folder and upscale them with below settings.": "相对应的会用 \\upscale_me\\ 文件夹中的文件按照下列设置对它们进行放大。",
|
||
"Intermediate results may look better than the end results. /!\\ Intermediate results are cleaned after each run, save them elsewhere if you want to keep them.": "中间的结果可能比最终结果看起来更好。提示: 中间的结果在每次运行后都会被清理，如果你想保留它们，就把它们保存在其他地方",
|
||
"Supports boolean operations: (! - negation, & - and, | - or, ^ - xor, \\ - difference, () - nested operations)": "支持布尔运算：（！-否定/取反，&-与，|-或，^-异或，\\-差分，()-嵌套操作）",
|
||
"Welcome to LightDiffusionFlow! \\(^o^)/~": "欢迎使用 LightDiffusionFlow! \\(^o^)/~",
|
||
"Ebsynth Utility": "Ebsynth Utility",
|
||
"Face Prompt": "Face Prompt",
|
||
"hm": "hm",
|
||
"reinhard": "reinhard",
|
||
"mvgd": "mvgd",
|
||
"mkl": "mkl",
|
||
"hm-mvgd-hm": "hm-mvgd-hm",
|
||
"hm-mkl-hm": "hm-mkl-hm",
|
||
"https://github.com/s9roll7/ebsynth_utility": "https://github.com/s9roll7/ebsynth_utility",
|
||
"c255e64a (Sat Apr 22 00:49:32 2023)": "c255e64a (Sat Apr 22 00:49:32 2023)",
|
||
"rawvideo": "rawvideo",
|
||
"ebsynth utility": "ebsynth utility",
|
||
"DeepDanbooru": "DeepDanbooru",
|
||
"YuNet": "YuNet",
|
||
"Yolov5_anime": "Yolov5_anime",
|
||
"Asymmetric tiling": "非對稱平舖",
|
||
"asymmetric-tiling-sd-webui": "asymmetric-tiling-sd-webui",
|
||
"https://github.com/tjm35/asymmetric-tiling-sd-webui.git": "https://github.com/tjm35/asymmetric-tiling-sd-webui.git",
|
||
"Tile X": "Tile X",
|
||
"Tile Y": "Tile Y",
|
||
"Start tiling from step N": "Start tiling from step N",
|
||
"Stop tiling after step N (-1: Don't stop)": "Stop tiling after step N (-1: Don't stop)",
|
||
"LoRA": "LoRA",
|
||
"Elements": "Elements",
|
||
"Calcutation Mode": "Calcutation Mode",
|
||
"cosineA": "cosineA",
|
||
"cosineB": "cosineB",
|
||
"smoothAdd": "smoothAdd",
|
||
"tensor": "tensor",
|
||
"merge from ID": "merge from ID",
|
||
"Set from ID(-1 for last)": "Set from ID(-1 for last)",
|
||
"Hires Fix , Batch size": "Hires Fix , Batch size",
|
||
"Tensor Merge": "Tensor Merge",
|
||
"number of -1": "number of -1",
|
||
"Y grid (Disabled if blank)": "Y grid (Disabled if blank)",
|
||
"Reserve XY Plot": "Reserve XY Plot",
|
||
"block IDs": "block IDs",
|
||
"BASE": "BASE",
|
||
"calcmode": "calcmode",
|
||
"effective chekcer settings": "effective chekcer settings",
|
||
"Reservation": "Reservation",
|
||
"set to alpha": "set to alpha",
|
||
"read from alpha": "read from alpha",
|
||
"set to beta": "set to beta",
|
||
"read from beta": "read from beta",
|
||
"set to X": "set to X",
|
||
"weights for alpha, base alpha,IN00,IN02,...IN11,M00,OUT00,...,OUT11": "α 的权重 （基层α,输入层00,输入层01,...,输入层11,中间层,输出层00,...,输出层11）",
|
||
"weights,for beta, base beta,IN00,IN02,...IN11,M00,OUT00,...,OUT11": "β 的权重 （基层β,输入层00,输入层01,...,输入层11,中间层,输出层00,...,输出层11）",
|
||
"available": "available",
|
||
"Start XY plot": "Start XY plot",
|
||
"Delete list(-1 for all)": "删除列表（全删填-1）",
|
||
"Delete num :": "Delete num :",
|
||
"No.": "No.",
|
||
"float": "float",
|
||
"bf16": "bf16",
|
||
"LoRAname1:ratio1:Blocks1,LoRAname2:ratio2:Blocks2,...(\":blocks\" is option, not necessary)": "LoRAname1:ratio1:Blocks1,LoRAname2:ratio2:Blocks2,...(\":blocks\" is option, not necessary)",
|
||
"limit dimension": "limit dimension",
|
||
"ID": "ID",
|
||
"use ID": "use ID",
|
||
"load keys": "load keys",
|
||
"block": "block",
|
||
"key": "key",
|
||
"sd-webui-supermerger": "sd-webui-supermerger",
|
||
"https://github.com/hako-mikan/sd-webui-supermerger.git": "https://github.com/hako-mikan/sd-webui-supermerger.git",
|
||
"847c8760 (Fri Apr 21 16:44:01 2023)": "847c8760 (Fri Apr 21 16:44:01 2023)",
|
||
"Blocks:Element:Ratio,Blocks:Element:Ratio,...": "Blocks:Element:Ratio,Blocks:Element:Ratio,...",
|
||
"beta (if Triple or Twice is not selected,Twice automatically enable)": "beta (if Triple or Twice is not selected,Twice automatically enable)",
|
||
"alpha and beta": null,
|
||
"mbw alpha": "mbw alpha",
|
||
"mbw beta": "mbw beta",
|
||
"mbw alpha and beta": "mbw alpha and beta",
|
||
"pinpoint blocks (alpha or beta must be selected for another axis)": "pinpoint blocks (alpha or beta must be selected for another axis)",
|
||
"elemental": "elemental",
|
||
"pinpoint element": "pinpoint element",
|
||
"effective elemental checker": "effective elemental checker",
|
||
"tensors": "tensors",
|
||
"BLIP2 Captioner": "BLIP2 Captioner",
|
||
"Generated Caption": "已產生的描述",
|
||
"Output Caption Extension": "Output Caption Extension",
|
||
"Idle": "Idle",
|
||
"Nucleus": "Nucleus",
|
||
"Top-K": "Top-K",
|
||
"Number of beams (0 = no beam search)": "Number of beams (0 = no beam search)",
|
||
"Caption min length": "描述最小長度",
|
||
"Caption max length": "描述最大長度",
|
||
"Top p": "Top p",
|
||
"stable-diffusion-webui-blip2-captioner": "stable-diffusion-webui-blip2-captioner",
|
||
"https://github.com/p1atdev/stable-diffusion-webui-blip2-captioner": "https://github.com/p1atdev/stable-diffusion-webui-blip2-captioner",
|
||
"path/to/caption": "path/to/caption",
|
||
"txt": "txt",
|
||
"Highres. percentage chance": "高解析度修復：隨機機率",
|
||
"Highres. Denoising Strength": "高解析度修復：重繪幅度",
|
||
"Highres. Width": "高解析度修復：第一遍寬度",
|
||
"Highres. Height": "高解析度修復：第一遍高度",
|
||
"Stop at CLIP layers": "在 CLIP 模型的最後哪一層停下",
|
||
"stable-diffusion-webui-randomize": "随机化",
|
||
"https://github.com/innightwolfsleep/stable-diffusion-webui-randomize.git": "https://github.com/innightwolfsleep/stable-diffusion-webui-randomize.git",
|
||
"Comma separated list OR * for all": "以逗號分隔的列表或以 * 代表全部",
|
||
"Range of stepped values (min, max, step)": "含步數的隨機範圍（最小，最大，步數）",
|
||
"Float value from 0 to 1": "從 0 到 1 的浮點數數值",
|
||
"Loads weights from checkpoint before making images. You can either use hash or a part of filename (as seen in settings) for checkpoint name. Recommended to use with Y axis for less switching.": "在生成圖像之前從模型權重存檔點中加載權重。你可以使用哈希值或檔案名的一部分（如設定中所示）作為模型權重存檔點名稱。建議用在Y軸上以減少過程中模型的切換",
|
||
"Depth Library": "深度圖圖庫",
|
||
"Pages:": "頁碼：",
|
||
"https://github.com/jexom/sd-webui-depth-lib.git": "https://github.com/jexom/sd-webui-depth-lib.git",
|
||
"3D Model Loader": "3D 模型載入器",
|
||
"Light": "Light",
|
||
"Position/Rotate X": "Position/Rotate X",
|
||
"Position/Rotate Y": "Position/Rotate Y",
|
||
"Position/Rotate Z": "Position/Rotate Z",
|
||
"Show Ground": "顯示地面",
|
||
"Show Grid": "顯示網格",
|
||
"Show Axis": "顯示軸",
|
||
"Ground Color": "地面顏色",
|
||
"Light Color": "Light Color",
|
||
"Model Scale": "Model Scale",
|
||
"Load Model": "Load Model",
|
||
"Play/Pause": "Play/Pause",
|
||
"Canvas Background Color": "畫布背景顏色",
|
||
"Canvas Ground Color": "畫布地面顏色",
|
||
"sd-3dmodel-loader": "sd-3dmodel-loader",
|
||
"https://github.com/jtydhr88/sd-3dmodel-loader.git": "https://github.com/jtydhr88/sd-3dmodel-loader.git",
|
||
"Mine Diffusion": "Mine Diffusion",
|
||
"Blocks Blacklist": "Blocks Blacklist",
|
||
"Schematic Settings": "Schematic Settings",
|
||
"Orientation": "Orientation",
|
||
"Rotation": "Rotation",
|
||
"Schematic Size": "Schematic Size",
|
||
"Dithering": "Dithering",
|
||
"Save Schematic": "Save Schematic",
|
||
"litematic": "litematic",
|
||
"schematic(in development)": "schematic(in development)",
|
||
"Path to Schematics Folder": "Path to Schematics Folder",
|
||
"Schematic Name": "Schematic Name",
|
||
"exclude": "exclude",
|
||
"Blacklist Presets": "Blacklist Presets",
|
||
"Update Presets": "Update Presets",
|
||
"Blacklist Name": "Blacklist Name",
|
||
"Save Blacklist": "Save Blacklist",
|
||
"Bedrock": "Bedrock",
|
||
"Water (Unsupported!)": "Water (Unsupported!)",
|
||
"Last schemtatics dir path": "Last schemtatics dir path",
|
||
"https://github.com/fropych/mine-diffusion": "https://github.com/fropych/mine-diffusion",
|
||
"039062f0 (Fri Mar 31 14:38:41 2023)": "039062f0 (Fri Mar 31 14:38:41 2023)",
|
||
"Remove Bedrock": "Remove Bedrock",
|
||
"Remove Water (Unsupported!)": "Remove Water (Unsupported!)",
|
||
"All Blocks": "All Blocks",
|
||
"deforum.github.io": "deforum.github.io",
|
||
"kabachuha": "kabachuha",
|
||
"sd-parseq": "sd-parseq",
|
||
"as a UI to define your animation schedules (see the Parseq section in the Keyframes tab).": "作為一個用來定義動畫時間軸的使用者介面（UI），您可以使用 sd-parseq（請參考「關鍵幀（Keyframes）」標籤中的 Parseq 部分）",
|
||
"framesync.xyz": "framesync.xyz",
|
||
"!": "!",
|
||
"2D": "2D",
|
||
"3D": "3D",
|
||
"CFG": "提示詞相關性",
|
||
"Depth Warping": "Depth Warping",
|
||
"Field Of View": "Field Of View",
|
||
"MiDaS weight": "MiDaS weight",
|
||
"Sampling mode": "Sampling mode",
|
||
"bicubic": "bicubic",
|
||
"bilinear": "bilinear",
|
||
"nearest": "nearest",
|
||
"Perspective flip fv": "Perspective flip fv",
|
||
"Match Frame 0 HSV": "匹配帧 0 HSV",
|
||
"Match Frame 0 LAB": "匹配帧 0 LAB",
|
||
"Match Frame 0 RGB": "匹配帧 0 RGB",
|
||
"Color coherence video every N frames": "Color coherence video every N frames",
|
||
"ControlNet not found. Please install it :)": "ControlNet not found. Please install it :)",
|
||
"Please, change animation mode to 2D or 3D to enable Hybrid Mode": "Please, change animation mode to 2D or 3D to enable Hybrid Mode",
|
||
"by": "by",
|
||
"'": "'",
|
||
"(": "(",
|
||
")": ")",
|
||
"DIS Medium": "DIS Medium",
|
||
"Farneback": "Farneback",
|
||
"FFMPEG mp4": "FFMPEG mp4",
|
||
"Skip video for run all": "Skip video for run all",
|
||
"realesr-animevideov3": "realesr-animevideov3",
|
||
"realesrgan-x4plus": "realesrgan-x4plus",
|
||
"realesrgan-x4plus-anime": "realesrgan-x4plus-anime",
|
||
"x2": "x2",
|
||
"x3": "x3",
|
||
"x4": "x4",
|
||
"Frame Interoplation": "Frame Interoplation",
|
||
"RIFE": "RIFE",
|
||
"/": "/",
|
||
"FILM": "FILM",
|
||
"RIFE v4.6": "RIFE v4.6",
|
||
"Slow-Mo X": "Slow-Mo X",
|
||
"Interpolate an existing video": "Interpolate an existing video",
|
||
"Interpolated Vid FPS": "Interpolated Vid FPS",
|
||
"*Interpolate uploaded video*": "*Interpolate uploaded video*",
|
||
"Upscale V2": "Upscale V2",
|
||
"Upscale V1": "Upscale V1",
|
||
"Path name modifier": "Path name modifier",
|
||
"x0_pred": "x0_pred",
|
||
"x": "x",
|
||
"Enter relative to webui folder or Full-Absolute path, and make sure it ends with something like this: '20230124234916_%05d.png', just replace 20230124234916 with your batch ID. The %05d is important, don't forget it!": "Enter relative to webui folder or Full-Absolute path, and make sure it ends with something like this: '20230124234916_%05d.png', just replace 20230124234916 with your batch ID. The %05d is important, don't forget it!",
|
||
"MP4 path": "MP4 path",
|
||
"Render steps": "Render steps",
|
||
"INVISIBLE": "INVISIBLE",
|
||
"from_img2img_instead_of_link": "from_img2img_instead_of_link",
|
||
"Perlin W": "Perlin W",
|
||
"Perlin H": "Perlin H",
|
||
"Filename format": "Filename format",
|
||
"save_settings": "save_settings",
|
||
"save_samples": "save_samples",
|
||
"display_samples": "display_samples",
|
||
"Subseed controls & More": "Subseed controls & More",
|
||
"Enable subseed controls": "Enable subseed controls",
|
||
"N Batch": "N Batch",
|
||
"Save sample per step": "Save sample per step",
|
||
"Show sample per step": "Show sample per step",
|
||
"Deforum extension for auto1111 — version 2.2b": "Deforum extension for auto1111 — version 2.2b",
|
||
"* Paths can be relative to webui folder OR full - absolute": "* Paths can be relative to webui folder OR full - absolute",
|
||
"General Settings File": "General Settings File",
|
||
"Video Settings File": "Video Settings File",
|
||
"Save Video Settings": "保存视频设置",
|
||
"deforum-for-automatic1111-webui": "Deforum",
|
||
"https://github.com/deforum-art/deforum-for-automatic1111-webui.git": "https://github.com/deforum-art/deforum-for-automatic1111-webui.git",
|
||
"Canvas Editor": "Canvas Editor",
|
||
"Polotno API Key": "Polotno API Key",
|
||
"https://github.com/jtydhr88/sd-canvas-editor": "https://github.com/jtydhr88/sd-canvas-editor",
|
||
"4f3ffe4a (Tue Apr 18 01:45:04 2023)": "4f3ffe4a (Tue Apr 18 01:45:04 2023)",
|
||
"Text": "文字",
|
||
"Photos": "Photos",
|
||
"Upload": "Upload",
|
||
"Txt2img": "Txt2img",
|
||
"Img2img": "Img2img",
|
||
"Position": "Position",
|
||
"Photos by": "Photos by",
|
||
"My fonts": "My fonts",
|
||
"Create header": "Create header",
|
||
"Create sub header": "Create sub header",
|
||
"Create body text": "Create body text",
|
||
"Show templates with the same size": "Show templates with the same size",
|
||
"Lines": "Lines",
|
||
"Do you want to upload your own images?": "Do you want to upload your own images?",
|
||
"Upload Image": "Upload Image",
|
||
"No results": "No results",
|
||
"Elements on your active page:": "Elements on your active page:",
|
||
"No elements on the page...": "No elements on the page...",
|
||
"Use magic resize": "Use magic resize",
|
||
"Instagram Post": "Instagram Post",
|
||
"Instagram Story": "Instagram Story",
|
||
"Instagram Ad": "Instagram Ad",
|
||
"Facebook Post": "Facebook Post",
|
||
"Facebook Cover": "Facebook Cover",
|
||
"Facebook Ad": "Facebook Ad",
|
||
"Youtube Thumbnail": "Youtube Thumbnail",
|
||
"Youtube Channel": "Youtube Channel",
|
||
"Full HD": "Full HD",
|
||
"txt2img Library": "txt2img Library",
|
||
"img2img Library": "img2img Library",
|
||
"the wiki for usage tips.": "the wiki for usage tips.",
|
||
"Mimic CFG Scale": "模拟提示词相关性(Mimic CFG Scale)",
|
||
"Dynamic Thresholding Advanced Options": "Dynamic Thresholding Advanced Options",
|
||
"sd-dynamic-thresholding": "sd-dynamic-thresholding",
|
||
"https://github.com/mcmonkeyprojects/sd-dynamic-thresholding.git": "https://github.com/mcmonkeyprojects/sd-dynamic-thresholding.git",
|
||
"Top percentile of latents to clamp": "Top percentile of latents to clamp",
|
||
"Mimic Scale Scheduler": "Mimic Scale Scheduler",
|
||
"Constant": "Constant",
|
||
"Minimum value of the Mimic Scale Scheduler": "Minimum value of the Mimic Scale Scheduler",
|
||
"CFG Scale Scheduler": "CFG Scale Scheduler",
|
||
"Minimum value of the CFG Scale Scheduler": "Minimum value of the CFG Scale Scheduler",
|
||
"Power Scheduler Value": "Power Scheduler Value",
|
||
"Linear Down": "Linear Down",
|
||
"Cosine Down": "Cosine Down",
|
||
"Half Cosine Down": "Half Cosine Down",
|
||
"Linear Up": "Linear Up",
|
||
"Cosine Up": "Cosine Up",
|
||
"Half Cosine Up": "Half Cosine Up",
|
||
"Power Up": "Power Up",
|
||
"Power Down": "Power Down",
|
||
"Maximum width or height (whichever is higher)": "最大寬度或高度（無論哪個較高）",
|
||
"Scale to maximum width or height": "放大至最大寬度或高度",
|
||
"-75%": "-75%",
|
||
"-50%": "-50%",
|
||
"-25%": "-25%",
|
||
"+25%": "+25%",
|
||
"+50%": "+50%",
|
||
"+75%": "+75%",
|
||
"+100%": "+100%",
|
||
"Expand by default": "預設展開擴充功能",
|
||
"Show maximum width or height button": "顯示最大寬度或高度按鈕",
|
||
"Maximum width or height default": "最大寬度或高度的預設值",
|
||
"Show predefined percentage buttons": "顯示預設的百分比按鈕",
|
||
"Predefined percentage buttons, applied to dimensions (75, 125, 150)": "預設的百分比按鈕，套用於尺寸（75,125,150）",
|
||
"Predefined percentage display format": "預設百分比顯示格式",
|
||
"sd-webui-aspect-ratio-helper": "sd-webui-aspect-ratio-helper",
|
||
"https://github.com/thomasasfk/sd-webui-aspect-ratio-helper.git": "https://github.com/thomasasfk/sd-webui-aspect-ratio-helper.git",
|
||
"Plot": "圖表",
|
||
"a1111-stable-diffusion-webui-vram-estimator": "a1111-stable-diffusion-webui-vram-estimator",
|
||
"https://github.com/space-nuko/a1111-stable-diffusion-webui-vram-estimator.git": "https://github.com/space-nuko/a1111-stable-diffusion-webui-vram-estimator.git",
|
||
"Note:": "注意：",
|
||
"json input path (Optional, only for append results)": "json 输入路径（可选，只用于追加结果）",
|
||
"Overwrite if output file exists": "Overwrite if output file exists",
|
||
"Save metadata image key as fullpath": "Save metadata image key as fullpath",
|
||
"Dataset Filter": "Dataset Filter",
|
||
"Filter Apply": "套用過濾器",
|
||
"hidden_idx_next": "hidden_idx_next",
|
||
"hidden_idx_prev": "hidden_idx_prev",
|
||
"(INCLUSIVE)": "(INCLUSIVE)",
|
||
"(EXCLUSIVE)": "(EXCLUSIVE)",
|
||
"Number": "數量",
|
||
"Select Tags": "选择标签",
|
||
"hidden_s_or_n": "hidden_s_or_n",
|
||
"BLIP": "BLIP",
|
||
"wd-v1-4-vit-tagger": "wd-v1-4-vit-tagger",
|
||
"wd-v1-4-convnext-tagger": "wd-v1-4-convnext-tagger",
|
||
"wd-v1-4-vit-tagger-v2": "wd-v1-4-vit-tagger-v2",
|
||
"wd-v1-4-convnext-tagger-v2": "wd-v1-4-convnext-tagger-v2",
|
||
"wd-v1-4-swinv2-tagger-v2": "wd-v1-4-swinv2-tagger-v2",
|
||
"Moved or deleted images will be unloaded.": "被移动或被删除的图片会被卸载。",
|
||
"Target dataset num: 0": "Target dataset num: 0",
|
||
"Number of columns on image gallery": "图库显示图像列数",
|
||
"stable-diffusion-webui-dataset-tag-editor": "数据集标签编辑器",
|
||
"https://github.com/toshiaki1729/stable-diffusion-webui-dataset-tag-editor": "https://github.com/toshiaki1729/stable-diffusion-webui-dataset-tag-editor",
|
||
"C:\\path\\to\\metadata.json": "C:\\path\\to\\metadata.json",
|
||
"C:\\directory\\of\\datasets": "C:\\directory\\of\\datasets",
|
||
".txt (on Load and Save)": ".txt (on Load and Save)",
|
||
"Erode size": "Erode size",
|
||
"Foreground threshold": "Foreground threshold",
|
||
"Background threshold": "Background threshold",
|
||
"https://github.com/AUTOMATIC1111/stable-diffusion-webui-rembg.git": "https://github.com/AUTOMATIC1111/stable-diffusion-webui-rembg.git",
|
||
"64821f04 (Sun Mar 12 15:32:00 2023)": "64821f04 (Sun Mar 12 15:32:00 2023)",
|
||
"u2net": "u2net",
|
||
"u2netp": "u2netp",
|
||
"u2net_human_seg": "u2net_human_seg",
|
||
"u2net_cloth_seg": "u2net_cloth_seg",
|
||
"silueta": "silueta",
|
||
"Model Previews": "模型預覽器",
|
||
"Embeddings": "嵌入",
|
||
"Filter": "過濾器",
|
||
"Model Preview XD": "模型預覽器",
|
||
"Name matching rule for preview files": "預覽檔的名稱符合規則",
|
||
"Loose": "寬鬆",
|
||
"Strict": "嚴格",
|
||
"Folder": "檔案夾",
|
||
"Limit the height of preivews to the height of the browser window (.html preview files are always limited regardless of this setting)": "將預覽的高度限制為瀏覽器視窗高度（.html 預覽檔始終受此設定的限制）",
|
||
"No Preview Found": "查無預覽檔",
|
||
"https://github.com/CurtisDS/sd-model-preview-xd.git": "https://github.com/CurtisDS/sd-model-preview-xd.git",
|
||
"Records list": "Records list",
|
||
"Reload": "Reload",
|
||
"Download All": "Download All",
|
||
"Display options": "Display options",
|
||
"Import/Export": "Import/Export",
|
||
"Back": "Back",
|
||
"Description:": "Description:",
|
||
"Name:": "Name:",
|
||
"Model title to display (Required)": "Model title to display (Required)",
|
||
"Model type:": "Model type:",
|
||
"Model type (Required)": "Model type (Required)",
|
||
"Download URL:": "Download URL:",
|
||
"Link to the model file (Required)": "Link to the model file (Required)",
|
||
"Preview image URL:": "Preview image URL:",
|
||
"Link to the image for preview (Optional)": "Link to the image for preview (Optional)",
|
||
"Model page URL:": "Model page URL:",
|
||
"Link to the model page (Optional)": "Link to the model page (Optional)",
|
||
"Groups": "Groups",
|
||
"Select existing groups or add new.": "Select existing groups or add new.",
|
||
"Add groups": "Add groups",
|
||
"Bind with existing model": "Bind with existing model",
|
||
"Download options": "Download options",
|
||
"description_output_widget": "description_output_widget",
|
||
"Record removal": "Record removal",
|
||
"Remove record": "Remove record",
|
||
"Remove files": "Remove files",
|
||
"Start Download": "Start Download",
|
||
"Layout Type:": "Layout Type:",
|
||
"Cards": "Cards",
|
||
"Table": "Table",
|
||
"Card width (default if 0):": "Card width (default if 0):",
|
||
"Card height (default if 0):": "Card height (default if 0):",
|
||
"Storage Type:": "Storage Type:",
|
||
"SQLite": "SQLite",
|
||
"Firebase": "Firebase",
|
||
"Download Preview": "Download Preview",
|
||
"sd-model-organizer": "sd-model-organizer",
|
||
"https://github.com/alexandersokol/sd-model-organizer": "https://github.com/alexandersokol/sd-model-organizer",
|
||
"652580de (Mon May 8 11:00:16 2023)": "652580de (Mon May 8 11:00:16 2023)",
|
||
"Sort By": "Sort By",
|
||
"Downloaded first": "Downloaded first",
|
||
"Search by name": "Search by name",
|
||
"Model types": "Model types",
|
||
"Show downloaded": "Show downloaded",
|
||
"Show not downloaded": "Show not downloaded",
|
||
"Time Added": "Time Added",
|
||
"Time Added Reversed": "Time Added Reversed",
|
||
"Name Reversed": "Name Reversed",
|
||
"Hyper Network": "Hyper Network",
|
||
"LyCORIS": "LyCORIS",
|
||
"Import .json file": "Import .json file",
|
||
"Add model": "Add model",
|
||
"Download Path:": "Download Path:",
|
||
"Path to the download dir, default if empty. (Required for \"Other\" model type)": "Path to the download dir, default if empty. (Required for \"Other\" model type)",
|
||
"Download File Name:": "Download File Name:",
|
||
"Downloaded file name. Default if empty (Optional)": "Downloaded file name. Default if empty (Optional)",
|
||
"Subdir": "Subdir",
|
||
"Download file into sub directory (Optional)": "Download file into sub directory (Optional)",
|
||
"Add new group": "Add new group",
|
||
"Type comma-separated group names": "Type comma-separated group names",
|
||
"Add Group": "Add Group",
|
||
"Positive prompts:": "Positive prompts:",
|
||
"Model positive prompts (Optional)": "Model positive prompts (Optional)",
|
||
"Negative prompts:": "Negative prompts:",
|
||
"Model negative prompts (Optional)": "Model negative prompts (Optional)",
|
||
"Aesthetic": "Aesthetic",
|
||
"Waifu": "Waifu",
|
||
"Start": "Start",
|
||
"stable-diffusion-webui-cafe-aesthetic": "stable-diffusion-webui-cafe-aesthetic",
|
||
"https://github.com/p1atdev/stable-diffusion-webui-cafe-aesthetic": "https://github.com/p1atdev/stable-diffusion-webui-cafe-aesthetic",
|
||
"stable-diffusion-webui-depthmap-script": "stable-diffusion-webui-depthmap-script",
|
||
"Compute on": "計算於",
|
||
"Match input size (size is ignored when using boost)": "符合輸入大小（當使用加速器時，大小將被忽略）",
|
||
"Combine into one image.": "合并为一个图像",
|
||
"Generate Stereo side-by-side image": "生成并排立体图像 (side-by-side image)",
|
||
"Generate Stereo anaglyph image (red/cyan)": "生成 anaglyph 立体图（红/蓝）",
|
||
"Generate 3D inpainted mesh. (Sloooow)": "生成 3D inpainted mesh （很慢很慢很慢）",
|
||
"Save the foreground masks": "儲存前景遮罩",
|
||
"pre-depth background removal": "pre-depth 背景消除",
|
||
"Rembg Model": "背景移除模型",
|
||
"Input Mesh (.ply)": "Input Mesh (.ply)",
|
||
"Generate video from inpainted mesh.": "从 inpainted mesh 生成视频",
|
||
"https://github.com/thygate/stable-diffusion-webui-depthmap-script.git": "https://github.com/thygate/stable-diffusion-webui-depthmap-script.git",
|
||
"Smart Preprocess": "智慧預處理",
|
||
"sd_smartprocess": "sd_smartprocess",
|
||
"Rename images": "重新命名圖像",
|
||
"Output Size": "輸出尺寸",
|
||
"Pad Images": "Pad Images",
|
||
"Generate Captions": "產生描述",
|
||
"Max Caption Length (0=unlimited)": "最大描述長度（設 0 為無限制）",
|
||
"Existing Caption Action": "既有描述處理",
|
||
"Add CLIP results to Caption": "將 CLIP 結果加入描述",
|
||
"Number of CLIP beams": "Number of CLIP beams",
|
||
"Use v2 CLIP Model": "使用 v2 CLIP 模型",
|
||
"Max flavors to append.": "Max flavors to append.",
|
||
"Append Movement tags from CLIP": "使用来自 CLIP 的动作标签",
|
||
"Append Trending tags from CLIP": "Append Trending tags from CLIP",
|
||
"Add WD14 Tags to Caption": "将 WD14 标签添加到到描述文本中",
|
||
"Minimum Score for WD14 Tags": "Minimum Score for WD14 Tags",
|
||
"Minimum Score for DeepDanbooru Tags": "Minimum Score for DeepDanbooru Tags",
|
||
"Tags To Ignore": "要忽略的標記",
|
||
"Replace Class with Subject in Caption": "在描述中將類別取代為主題",
|
||
"Subject Class": "主題類別",
|
||
"Subject class to crop (leave blank to auto-detect)": "要裁切的主題類別（留空以自動偵測）",
|
||
"Subject Name": "主題名稱",
|
||
"Subject Name to replace class with in captions": "要在描述中將類別取代的主題名稱",
|
||
"Upscale and Resize": "放大並縮放比例",
|
||
"https://github.com/d8ahazard/sd_smartprocess.git": "https://github.com/d8ahazard/sd_smartprocess.git",
|
||
"Ultimate SD upscale": "終極 SD 放大",
|
||
"Will upscale the image depending on the selected target size type": "將根據選擇的目標尺寸類型對圖像進行放大。",
|
||
"Target size type": "圖像尺寸類型",
|
||
"From img2img2 settings": "依照圖生圖設定",
|
||
"Scale from image size": "從圖像大小縮放",
|
||
"Custom width": "自訂寬度",
|
||
"Custom height": "自訂高度",
|
||
"Redraw options:": "重繪選項：",
|
||
"Padding": "內距",
|
||
"Seams fix:": "儲存接縫修復圖像",
|
||
"Band pass": "帶通",
|
||
"Half tile offset pass": "半圖塊偏移過濾",
|
||
"Half tile offset pass + intersections": "半圖塊偏移過濾 + 交集",
|
||
"Save options:": "輸出到 output 的圖像：",
|
||
"Upscaled": "儲存 SD 放大的圖像",
|
||
"ultimate-upscale-for-automatic1111": "ultimate-upscale-for-automatic1111",
|
||
"https://github.com/Coyote-A/ultimate-upscale-for-automatic1111.git": "https://github.com/Coyote-A/ultimate-upscale-for-automatic1111.git",
|
||
"Functions": "Functions",
|
||
"Select function:": "Select function:",
|
||
"Example Function": "Example Function",
|
||
"Enter a subject 🡢 subject": "Enter a subject 🡢 subject",
|
||
"Add fluff terms? 🡢 use_fluff": "Add fluff terms? 🡢 use_fluff",
|
||
"Auto-include this in prompt": "Auto-include this in prompt",
|
||
"Generate Shortcode": "Generate Shortcode",
|
||
"img2img folder": "img2img folder",
|
||
"Image folder 🡢 folder": "Image folder 🡢 folder",
|
||
"String to include before the filename 🡢 pre": "String to include before the filename 🡢 pre",
|
||
"String to include after the filename 🡢 post": "String to include after the filename 🡢 post",
|
||
"txt2img2img": "txt2img2img",
|
||
"Subject A 🡢 subject_a": "Subject A 🡢 subject_a",
|
||
"Subject B 🡢 subject_b": "Subject B 🡢 subject_b",
|
||
"Shortcodes": "Shortcodes",
|
||
"Select shortcode:": "Select shortcode:",
|
||
"Content": "Content",
|
||
"##": "##",
|
||
"##: Houses a multiline comment that will not affect the final output.": "##: Houses a multiline comment that will not affect the final output.",
|
||
"#": "#",
|
||
"#: Houses a comment that does not affect your final prompt.": "#: Houses a comment that does not affect your final prompt.",
|
||
"Comment 🡢 str": "Comment 🡢 str",
|
||
"after": "after",
|
||
"after: Processes arbitrary text following the main output.": "after: Processes arbitrary text following the main output.",
|
||
"Order compared to other [after] blocks 🡢 int": "Order compared to other [after] blocks 🡢 int",
|
||
"antonyms": "antonyms",
|
||
"antonyms: Replaces the content with one or more antonyms.": "antonyms: Replaces the content with one or more antonyms.",
|
||
"array": "array",
|
||
"array: Manages a group or list of values.": "array: Manages a group or list of values.",
|
||
"Name of array variable 🡢 str": "Name of array variable 🡢 str",
|
||
"Get or set index statements 🡢 verbatim": "Get or set index statements 🡢 verbatim",
|
||
"Custom delimiter string 🡢 _delimiter": "Custom delimiter string 🡢 _delimiter",
|
||
"Shuffle the array 🡢 _shuffle": "Shuffle the array 🡢 _shuffle",
|
||
"Prepend value(s) to the array 🡢 _prepend": "Prepend value(s) to the array 🡢 _prepend",
|
||
"Append value(s) to the array 🡢 _append": "Append value(s) to the array 🡢 _append",
|
||
"Delete value(s) from the array by index 🡢 _del": "Delete value(s) from the array by index 🡢 _del",
|
||
"Removed specified value(s) from the array 🡢 _remove": "Removed specified value(s) from the array 🡢 _remove",
|
||
"Find the first index of the following value(s) 🡢 _find": "Find the first index of the following value(s) 🡢 _find",
|
||
"article": "article",
|
||
"article: Returns the content with prefixed with a definite or indefinite article.": "article: Returns the content with prefixed with a definite or indefinite article.",
|
||
"autocorrect": "autocorrect",
|
||
"autocorrect: Attempts to correct the spelling of content.": "autocorrect: Attempts to correct the spelling of content.",
|
||
"case": "case",
|
||
"case: Use within [switch] to run different logic blocks depending on the value of a var.": "case: Use within [switch] to run different logic blocks depending on the value of a var.",
|
||
"Matching value 🡢 str": "Matching value 🡢 str",
|
||
"casing": "casing",
|
||
"casing: Converts the casing of content.": "casing: Converts the casing of content.",
|
||
"Casing method 🡢 str": "Casing method 🡢 str",
|
||
"camelcase": "camelcase",
|
||
"uppercase": "uppercase",
|
||
"lowercase": "lowercase",
|
||
"pascalcase": "pascalcase",
|
||
"snakecase": "snakecase",
|
||
"constcase": "constcase",
|
||
"kebabcase": "kebabcase",
|
||
"upperkebabcase": "upperkebabcase",
|
||
"separatorcase": "separatorcase",
|
||
"sentencecase": "sentencecase",
|
||
"titlecase": "titlecase",
|
||
"alphanumcase": "alphanumcase",
|
||
"chance": "chance",
|
||
"chance: Returns the content if the number you passed is greater than or equal to a random number between 1 and 100.": "chance: Returns the content if the number you passed is greater than or equal to a random number between 1 and 100.",
|
||
"Highest possible roll 🡢 _sides": "Highest possible roll 🡢 _sides",
|
||
"choose": "choose",
|
||
"choose: Returns one of multiple options, delimited by newline or vertical pipe": "choose: Returns one of multiple options, delimited by newline or vertical pipe",
|
||
"Number of times to choose 🡢 int": "Number of times to choose 🡢 int",
|
||
"String delimiter when returning more than one choice 🡢 _sep": "String delimiter when returning more than one choice 🡢 _sep",
|
||
"Custom weight per option 🡢 _weighted": "Custom weight per option 🡢 _weighted",
|
||
"Override random nature of shortcode with predetermined outcome 🡢 _case": "Override random nature of shortcode with predetermined outcome 🡢 _case",
|
||
"config": "配置",
|
||
"config: Updates your settings with the content for the duration of a run.": "config: Updates your settings with the content for the duration of a run.",
|
||
"conjugate": "conjugate",
|
||
"conjugate: Converts the content verb into another conjugated form.": "conjugate: Converts the content verb into another conjugated form.",
|
||
"do": "do",
|
||
"do: It's a do-until loop.": "do: It's a do-until loop.",
|
||
"Until condition 🡢 until": "Until condition 🡢 until",
|
||
"elif": "elif",
|
||
"elif: Shorthand 'else-if.'": "elif: Shorthand 'else-if.'",
|
||
"else": "else",
|
||
"else: Returns content if a previous conditional shortcode failed its check, otherwise discards content.": "else: Returns content if a previous conditional shortcode failed its check, otherwise discards content.",
|
||
"eval": "eval",
|
||
"eval: Parses the content using the simpleeval library, returning the result. Particularly useful for arithmetic.": "eval: Parses the content using the simpleeval library, returning the result. Particularly useful for arithmetic.",
|
||
"file": "file",
|
||
"file: Processes the file content of 'path.'": "file: Processes the file content of 'path.'",
|
||
"filelist": "filelist",
|
||
"Filepath 🡢 str": "Filepath 🡢 str",
|
||
"Expected encoding 🡢 _encoding": "Expected encoding 🡢 _encoding",
|
||
"filelist: Returns a list of files at a given location using glob.": "filelist: Returns a list of files at a given location using glob.",
|
||
"Result delimiter 🡢 _delimiter": "Result delimiter 🡢 _delimiter",
|
||
"for": "for",
|
||
"for: It's a for loop.": "for: It's a for loop.",
|
||
"Set a variable 🡢 my_var": "Set a variable 🡢 my_var",
|
||
"Conditional check 🡢 str": "Conditional check 🡢 str",
|
||
"Operation to perform at the end step 🡢 str": "Operation to perform at the end step 🡢 str",
|
||
"get": "get",
|
||
"get: Returns the value of a variable.": "get: Returns the value of a variable.",
|
||
"Variable to get 🡢 str": "Variable to get 🡢 str",
|
||
"Default value if the variable doesn't exist 🡢 _default": "Default value if the variable doesn't exist 🡢 _default",
|
||
"Separator string when returning multiple variables 🡢 _sep": "Separator string when returning multiple variables 🡢 _sep",
|
||
"String to prepend to the variable 🡢 _before": "String to prepend to the variable 🡢 _before",
|
||
"String to append to the variable 🡢 _after": "String to append to the variable 🡢 _after",
|
||
"hypernyms": "hypernyms",
|
||
"hypernyms: Replaces the content with one or more hypernyms.": "hypernyms: Replaces the content with one or more hypernyms.",
|
||
"hyponyms": "hyponyms",
|
||
"hyponyms: Replaces the content with one or more synonyms.": "hyponyms: Replaces the content with one or more synonyms.",
|
||
"if": "if",
|
||
"if: Checks whether a variable is equal to a given value.": "if: Checks whether a variable is equal to a given value.",
|
||
"Conditional statement 🡢 my_var": "Conditional statement 🡢 my_var",
|
||
"Evaluation method 🡢 _is": "Evaluation method 🡢 _is",
|
||
"Invert evaluation such that a true statement will return false 🡢 _not": "Invert evaluation such that a true statement will return false 🡢 _not",
|
||
"Return true if any one of multiple conditions are true 🡢 _any": "Return true if any one of multiple conditions are true 🡢 _any",
|
||
"info: Returns various types of metadata about the content.": "info: Returns various types of metadata about the content.",
|
||
"Return the character count 🡢 character_count": "Return the character count 🡢 character_count",
|
||
"Return the word count 🡢 word_count": "Return the word count 🡢 word_count",
|
||
"Return the sentence count 🡢 sentence_count": "Return the sentence count 🡢 sentence_count",
|
||
"Return the filename 🡢 filename": "Return the filename 🡢 filename",
|
||
"Return the CLIP token count (prompt complexity) 🡢 clip_count": "Return the CLIP token count (prompt complexity) 🡢 clip_count",
|
||
"Return the count of a custom substring 🡢 string_count": "Return the count of a custom substring 🡢 string_count",
|
||
"length": "length",
|
||
"length: Returns the number of items in a delimited string.": "length: Returns the number of items in a delimited string.",
|
||
"The string to evaluate 🡢 str": "The string to evaluate 🡢 str",
|
||
"Delimiter to check for 🡢 _delimiter": "Delimiter to check for 🡢 _delimiter",
|
||
"Maximum number to be returned 🡢 _max": "Maximum number to be returned 🡢 _max",
|
||
"max": "max",
|
||
"max: Returns the maximum value among the given arguments.": "max: Returns the maximum value among the given arguments.",
|
||
"min": "min",
|
||
"min: Returns the minimum value among the given arguments.": "min: Returns the minimum value among the given arguments.",
|
||
"override": "override",
|
||
"override: Force variable(s) to hold a pre-determined value the rest of the run.": "override: Force variable(s) to hold a pre-determined value the rest of the run.",
|
||
"Arguments in variable=value format 🡢 verbatim": "Arguments in variable=value format 🡢 verbatim",
|
||
"pluralize": "pluralize",
|
||
"pluralize: Converts the content into plural form.": "pluralize: Converts the content into plural form.",
|
||
"random: Returns a random number between 0 and a given max value (inclusive)": "random: Returns a random number between 0 and a given max value (inclusive)",
|
||
"Minimum number 🡢 _min": "Minimum number 🡢 _min",
|
||
"Maximum number 🡢 _max": "Maximum number 🡢 _max",
|
||
"Evaluate as floats instead of integers 🡢 _float": "Evaluate as floats instead of integers 🡢 _float",
|
||
"repeat": "repeat",
|
||
"repeat: Returns the content an arbitrary number of times.": "repeat: Returns the content an arbitrary number of times.",
|
||
"Number of times to repeat the content 🡢 int": "Number of times to repeat the content 🡢 int",
|
||
"Delimiter string between outputs 🡢 _sep": "Delimiter string between outputs 🡢 _sep",
|
||
"replace: Updates a string using the arguments for replacement logic.": "replace: Updates a string using the arguments for replacement logic.",
|
||
"Arbitrary replacement arguments in old=new format 🡢 verbatim": "Arbitrary replacement arguments in old=new format 🡢 verbatim",
|
||
"Original value, with advanced expression support 🡢 _from": "Original value, with advanced expression support 🡢 _from",
|
||
"New value, with advanced expression support 🡢 _to": "New value, with advanced expression support 🡢 _to",
|
||
"Maximum number of times the replacement may occur 🡢 _count": "Maximum number of times the replacement may occur 🡢 _count",
|
||
"set": "set",
|
||
"set: Stores a value into a given variable.": "set: Stores a value into a given variable.",
|
||
"Variable name 🡢 verbatim": "Variable name 🡢 verbatim",
|
||
"Only set this variable if it doesn't already exist 🡢 _new": "Only set this variable if it doesn't already exist 🡢 _new",
|
||
"Array of valid values (used in conjunction with _new) 🡢 _choices": "Array of valid values (used in conjunction with _new) 🡢 _choices",
|
||
"Append the content to the variable's current value 🡢 _append": "Append the content to the variable's current value 🡢 _append",
|
||
"Prepend the content to the variable's current value 🡢 _prepend": "Prepend the content to the variable's current value 🡢 _prepend",
|
||
"Print the variable's value 🡢 _out": "Print the variable's value 🡢 _out",
|
||
"sets": "sets",
|
||
"sets: The atomic version of [set] that lets you set multiple variables at once.": "sets: The atomic version of [set] that lets you set multiple variables at once.",
|
||
"Arbitrary arguments in variable=value format 🡢 verbatim": "Arbitrary arguments in variable=value format 🡢 verbatim",
|
||
"singularize": "singularize",
|
||
"singularize: Converts the content into singular form.": "singularize: Converts the content into singular form.",
|
||
"substring: Slices up the content.": "substring: Slices up the content.",
|
||
"Beginning index of the substring 🡢 start": "Beginning index of the substring 🡢 start",
|
||
"Ending index of the substring 🡢 end": "Ending index of the substring 🡢 end",
|
||
"Step size 🡢 step": "Step size 🡢 step",
|
||
"Unit type 🡢 unit": "Unit type 🡢 unit",
|
||
"characters": "characters",
|
||
"words": "words",
|
||
"switch": "switch",
|
||
"switch: Use in conjunction with [case] to run different logic blocks depending on the value of a var.": "switch: Use in conjunction with [case] to run different logic blocks depending on the value of a var.",
|
||
"Variable to test against 🡢 verbatim": "Variable to test against 🡢 verbatim",
|
||
"synonyms": "synonyms",
|
||
"synonyms: Replaces the content with one or more synonyms.": "synonyms: Replaces the content with one or more synonyms.",
|
||
"template: This is used by the Wizard to instantiate a custom template UI. It is bypassed by the normal shortcode parser.": "template: This is used by the Wizard to instantiate a custom template UI. It is bypassed by the normal shortcode parser.",
|
||
"unset": "unset",
|
||
"unset: Removes one or more variables from memory. Generally not needed.": "unset: Removes one or more variables from memory. Generally not needed.",
|
||
"Arbitrary variable names to free from memory 🡢 verbatim": "Arbitrary variable names to free from memory 🡢 verbatim",
|
||
"while": "while",
|
||
"while: Loops content until the condition returns false.": "while: Loops content until the condition returns false.",
|
||
"Arbitrary conditional statement(s) to test against 🡢 verbatim": "Arbitrary conditional statement(s) to test against 🡢 verbatim",
|
||
"Invert evaluation such that a false condition will end the loop 🡢 _not": "Invert evaluation such that a false condition will end the loop 🡢 _not",
|
||
"controlnet": "controlnet",
|
||
"Model name (do not include extension) 🡢 model": "Model name (do not include extension) 🡢 model",
|
||
"Resolution of the detection map 🡢 detect_resolution": "Resolution of the detection map 🡢 detect_resolution",
|
||
"Use low VRAM mode? 🡢 save_memory": "Use low VRAM mode? 🡢 save_memory",
|
||
"DDIM ETA 🡢 eta": "DDIM ETA 🡢 eta",
|
||
"Value Threshold 🡢 value_threhsold": "Value Threshold 🡢 value_threhsold",
|
||
"Distance Threshold 🡢 distance_threhsold": "Distance Threshold 🡢 distance_threhsold",
|
||
"Background Threshold 🡢 bg_threhsold": "Background Threshold 🡢 bg_threhsold",
|
||
"Canny low threshold 🡢 low_threshold": "Canny low threshold 🡢 low_threshold",
|
||
"Canny high threshold 🡢 high_threshold": "Canny high threshold 🡢 high_threshold",
|
||
"Render hands with Openpose? 🡢 openpose_hands": "Render hands with Openpose? 🡢 openpose_hands",
|
||
"enable_multi_images": "enable_multi_images",
|
||
"enable_multi_images: Allows to use multiple init_images or multiple masks": "enable_multi_images: Allows to use multiple init_images or multiple masks",
|
||
"file2mask": "file2mask",
|
||
"file2mask: Modify or replace your img2img mask with arbitrary files.": "file2mask: Modify or replace your img2img mask with arbitrary files.",
|
||
"Path to image file 🡢 str": "Path to image file 🡢 str",
|
||
"Mask blend mode 🡢 mode": "Mask blend mode 🡢 mode",
|
||
"Show mask in output 🡢 show": "Show mask in output 🡢 show",
|
||
"img2img: Runs an img2img task inside of an [after] block.": "img2img: Runs an img2img task inside of an [after] block.",
|
||
"img2img_autosize": "img2img_autosize",
|
||
"img2img_autosize: Automatically adjusts the width and height parameters in img2img mode based on the proportions of the input image.": "img2img_autosize: Automatically adjusts the width and height parameters in img2img mode based on the proportions of the input image.",
|
||
"Minimum pixels of at least one dimension 🡢 target": "Minimum pixels of at least one dimension 🡢 target",
|
||
"Only run this shortcode if using full resolution inpainting mode 🡢 only_full_res": "Only run this shortcode if using full resolution inpainting mode 🡢 only_full_res",
|
||
"img2pez": "img2pez",
|
||
"img2pez: Optimize a hard prompt using the PEZ algorithm and CLIP encoders, AKA Hard Prompts Made Easy.": "img2pez: Optimize a hard prompt using the PEZ algorithm and CLIP encoders, AKA Hard Prompts Made Easy.",
|
||
"Image path 🡢 image_path": "Image path 🡢 image_path",
|
||
"Prompt length 🡢 prompt_length": "Prompt length 🡢 prompt_length",
|
||
"Iterations 🡢 iterations": "Iterations 🡢 iterations",
|
||
"Learning rate 🡢 learning_rate": "Learning rate 🡢 learning_rate",
|
||
"Weight decay 🡢 weight_decay": "Weight decay 🡢 weight_decay",
|
||
"Prompt bs (well, that's what they call it) 🡢 prompt_bs": "Prompt bs (well, that's what they call it) 🡢 prompt_bs",
|
||
"CLIP model 🡢 clip_model": "CLIP model 🡢 clip_model",
|
||
"ViT-L-14": "ViT-L-14",
|
||
"ViT-H-14": "ViT-H-14",
|
||
"CLIP pretrain 🡢 clip_pretrain": "CLIP pretrain 🡢 clip_pretrain",
|
||
"openai": "openai",
|
||
"laion2b_s32b_b79k": "laion2b_s32b_b79k",
|
||
"Try freeing CLIP model from memory? 🡢 free_memory": "Try freeing CLIP model from memory? 🡢 free_memory",
|
||
"init_image": "init_image",
|
||
"init_image: Loads an image from the given path and sets it as the initial image for use with img2img.": "init_image: Loads an image from the given path and sets it as the initial image for use with img2img.",
|
||
"instance2mask": "instance2mask",
|
||
"instance2mask: Creates an image mask from instances of types specified by the content for use with inpainting.": "instance2mask: Creates an image mask from instances of types specified by the content for use with inpainting.",
|
||
"refine": "refine",
|
||
"Run inpaint per instance found 🡢 per_instance": "Run inpaint per instance found 🡢 per_instance",
|
||
"Precision of selected area 🡢 mask_precision": "Precision of selected area 🡢 mask_precision",
|
||
"Padding radius in pixels 🡢 padding": "Padding radius in pixels 🡢 padding",
|
||
"Smoothing radius in pixels 🡢 smoothing": "Smoothing radius in pixels 🡢 smoothing",
|
||
"Precision of instance selection 🡢 instance_precision": "Precision of instance selection 🡢 instance_precision",
|
||
"Number of instance to select 🡢 select": "Number of instance to select 🡢 select",
|
||
"Instance selection mode 🡢 select_mode": "Instance selection mode 🡢 select_mode",
|
||
"overlap": "overlap",
|
||
"relative overlap": "relative overlap",
|
||
"greatest area": "greatest area",
|
||
"invert_mask": "invert_mask",
|
||
"invert_mask: Inverts the mask (great in combination with multiple txt2masks)": "invert_mask: Inverts the mask (great in combination with multiple txt2masks)",
|
||
"pix2pix_zero": "pix2pix_zero",
|
||
"pix2pix_zero: A diffusion-based image-to-image approach that allows users to specify the edit direction on-the-fly.": "pix2pix_zero: A diffusion-based image-to-image approach that allows users to specify the edit direction on-the-fly.",
|
||
"txt2mask": "txt2mask",
|
||
"Use legacy weights 🡢 legacy_weights": "Use legacy weights 🡢 legacy_weights",
|
||
"Precision of selected area 🡢 precision": "Precision of selected area 🡢 precision",
|
||
"Negative mask prompt 🡢 negative_mask": "Negative mask prompt 🡢 negative_mask",
|
||
"Negative mask precision of selected area 🡢 neg_precision": "Negative mask precision of selected area 🡢 neg_precision",
|
||
"Negative mask padding radius in pixels 🡢 neg_padding": "Negative mask padding radius in pixels 🡢 neg_padding",
|
||
"Negative mask smoothing radius in pixels 🡢 neg_smoothing": "Negative mask smoothing radius in pixels 🡢 neg_smoothing",
|
||
"Mask color, enables Inpaint Sketch mode 🡢 sketch_color": "Mask color, enables Inpaint Sketch mode 🡢 sketch_color",
|
||
"Mask alpha, must be used in conjunction with mask color 🡢 sketch_alpha": "Mask alpha, must be used in conjunction with mask color 🡢 sketch_alpha",
|
||
"Save the mask size to the following variable 🡢 size_var": "Save the mask size to the following variable 🡢 size_var",
|
||
"zoom_enhance": "zoom_enhance",
|
||
"zoom_enhance: Upscales a selected portion of the image. ENHANCE!": "zoom_enhance: Upscales a selected portion of the image. ENHANCE!",
|
||
"Final image not showing up? Try using this workaround 🡢 use_workaround": "Final image not showing up? Try using this workaround 🡢 use_workaround",
|
||
"Mask to find 🡢 mask": "Mask to find 🡢 mask",
|
||
"Replacement 🡢 replacement": "Replacement 🡢 replacement",
|
||
"Negative replacement 🡢 negative_replacement": "Negative replacement 🡢 negative_replacement",
|
||
"Mask sorting method 🡢 mask_sort_method": "Mask sorting method 🡢 mask_sort_method",
|
||
"left-to-right": "left-to-right",
|
||
"right-to-left": "right-to-left",
|
||
"top-to-bottom": "top-to-bottom",
|
||
"bottom-to-top": "bottom-to-top",
|
||
"big-to-small": "big-to-small",
|
||
"small-to-big": "small-to-big",
|
||
"unsorted": "unsorted",
|
||
"Blur edges size 🡢 blur_size": "Blur edges size 🡢 blur_size",
|
||
"Minimum CFG scale 🡢 cfg_scale_min": "Minimum CFG scale 🡢 cfg_scale_min",
|
||
"Maximum denoising strength 🡢 denoising_max": "Maximum denoising strength 🡢 denoising_max",
|
||
"Maximum mask size (if a bigger mask is found, it will bypass the shortcode) 🡢 mask_size_max": "Maximum mask size (if a bigger mask is found, it will bypass the shortcode) 🡢 mask_size_max",
|
||
"Force denoising strength to this value 🡢 denoising_strength": "Force denoising strength to this value 🡢 denoising_strength",
|
||
"Force CFG scale to this value 🡢 cfg_scale": "Force CFG scale to this value 🡢 cfg_scale",
|
||
"Mask minimum number of pixels 🡢 min_area": "Mask minimum number of pixels 🡢 min_area",
|
||
"Contour padding in pixels 🡢 contour_padding": "Contour padding in pixels 🡢 contour_padding",
|
||
"Upscale width 🡢 upscale_width": "Upscale width 🡢 upscale_width",
|
||
"Upscale height 🡢 upscale_height": "Upscale height 🡢 upscale_height",
|
||
"Include original image in output window 🡢 include_original": "Include original image in output window 🡢 include_original",
|
||
"Save debug images to WebUI folder 🡢 save": "Save debug images to WebUI folder 🡢 save",
|
||
"Re-process extra networks after Unprompted is finished (WIP - this is not yet functional!)": "Re-process extra networks after Unprompted is finished (WIP - this is not yet functional!)",
|
||
"unprompted": "unprompted",
|
||
"https://github.com/ThereforeGames/unprompted.git": "https://github.com/ThereforeGames/unprompted.git",
|
||
"auto-sd-paint-ext Guide/Panel": "auto-sd-paint-ext Guide/Panel",
|
||
"Generate Krita Plugin Symlink Command": "Generate Krita Plugin Symlink Command",
|
||
"Launch Krita.": "Launch Krita.",
|
||
"On the menubar, go to": "On the menubar, go to",
|
||
"Settings > Manage Resources...": "Settings > Manage Resources...",
|
||
"In the window that appears, click": "In the window that appears, click",
|
||
"Open Resource Folder": "Open Resource Folder",
|
||
"In the file explorer that appears, look for a folder called": "In the file explorer that appears, look for a folder called",
|
||
"pykrita": "pykrita",
|
||
"or create it.": "or create it.",
|
||
"Enter the": "Enter the",
|
||
"folder and copy the folder location from the address bar.": "folder and copy the folder location from the address bar.",
|
||
"Paste the folder location below.": "Paste the folder location below.",
|
||
"Pykrita Folder Location": "Pykrita Folder Location",
|
||
"Search for \"Command Prompt\" in the Start Menu, right-click and click \"Run as Administrator...\", paste the follow commands and hit Enter:": "Search for \"Command Prompt\" in the Start Menu, right-click and click \"Run as Administrator...\", paste the follow commands and hit Enter:",
|
||
"mklink /j \"<path_to_pykrita>\\krita_diff\" \"D:\\StableDiffusion\\clean install\\webui\\extensions\\auto-sd-paint-ext\\frontends\\krita\\krita_diff\"\nmklink \"<path_to_pykrita>\\krita_diff.desktop\" \"D:\\StableDiffusion\\clean install\\webui\\extensions\\auto-sd-paint-ext\\frontends\\krita\\krita_diff.desktop\"": "mklink /j \"<path_to_pykrita>\\krita_diff\" \"D:\\StableDiffusion\\clean install\\webui\\extensions\\auto-sd-paint-ext\\frontends\\krita\\krita_diff\"\nmklink \"<path_to_pykrita>\\krita_diff.desktop\" \"D:\\StableDiffusion\\clean install\\webui\\extensions\\auto-sd-paint-ext\\frontends\\krita\\krita_diff.desktop\"",
|
||
"Linux command:": "Linux command:",
|
||
"ln -s \"D:\\StableDiffusion\\clean install\\webui\\extensions\\auto-sd-paint-ext\\frontends\\krita\\krita_diff\" \"<path_to_pykrita>/krita_diff\"\nln -s \"D:\\StableDiffusion\\clean install\\webui\\extensions\\auto-sd-paint-ext\\frontends\\krita\\krita_diff.desktop\" \"<path_to_pykrita>/krita_diff.desktop\"": "ln -s \"D:\\StableDiffusion\\clean install\\webui\\extensions\\auto-sd-paint-ext\\frontends\\krita\\krita_diff\" \"<path_to_pykrita>/krita_diff\"\nln -s \"D:\\StableDiffusion\\clean install\\webui\\extensions\\auto-sd-paint-ext\\frontends\\krita\\krita_diff.desktop\" \"<path_to_pykrita>/krita_diff.desktop\"",
|
||
"NOTE": "NOTE",
|
||
": Symlinks will break if you move or rename the repository or any\nof its parent folders or otherwise change the path such that the symlink\nbecomes invalid. In which case, repeat the above steps with the new": ": Symlinks will break if you move or rename the repository or any\nof its parent folders or otherwise change the path such that the symlink\nbecomes invalid. In which case, repeat the above steps with the new",
|
||
"folder location and (auto-detected) repository location.": "folder location and (auto-detected) repository location.",
|
||
": Ensure": ": Ensure",
|
||
"webui-user.bat": "webui-user.bat",
|
||
"webui-user.sh": "webui-user.sh",
|
||
"contains": "contains",
|
||
"--api": "--api",
|
||
"in": "in",
|
||
"COMMANDLINE_ARGS": "COMMANDLINE_ARGS",
|
||
"Enabling the Krita Plugin": "Enabling the Krita Plugin",
|
||
"Restart Krita.": "Restart Krita.",
|
||
"Settings > Configure Krita...": "Settings > Configure Krita...",
|
||
"On the left sidebar, go to": "On the left sidebar, go to",
|
||
"Python Plugin Manager": "Python Plugin Manager",
|
||
"Look for": "Look for",
|
||
"Stable Diffusion Plugin": "Stable Diffusion Plugin",
|
||
"and tick the checkbox.": "and tick the checkbox.",
|
||
"Restart Krita again for changes to take effect.": "Restart Krita again for changes to take effect.",
|
||
"SD Plugin": "SD Plugin",
|
||
"docked window should appear on the left of the Krita window. If it does not, look on the menubar under": "docked window should appear on the left of the Krita window. If it does not, look on the menubar under",
|
||
"Settings > Dockers": "Settings > Dockers",
|
||
"Next Steps": "Next Steps",
|
||
"Troubleshooting": "Troubleshooting",
|
||
"Update Guide": "Update Guide",
|
||
"Usage Guide": "Usage Guide",
|
||
"TODO: Control/status panel": "TODO: Control/status panel",
|
||
"https://github.com/Interpause/auto-sd-paint-ext.git": "https://github.com/Interpause/auto-sd-paint-ext.git",
|
||
"Only save background free pictures": "Only save background free pictures",
|
||
"Do not auto save": "Do not auto save",
|
||
"Custom Background": "Custom Background",
|
||
"Random Custom Background": "Random Custom Background",
|
||
"https://github.com/KutsuyaYuki/ABG_extension.git": "https://github.com/KutsuyaYuki/ABG_extension.git",
|
||
"ABG Remover": "ABG Remover",
|
||
"Create inspiration images": "建立靈感圖像",
|
||
"Artist or styles name list. '.txt' files with one name per line": "Artist or styles name list. '.txt' files with one name per line",
|
||
"Prompt Placeholder, which can be used at the top of prompt input": "Prompt Placeholder, which can be used at the top of prompt input",
|
||
"To activate inspiration function, you need get \"inspiration\" images first.": "To activate inspiration function, you need get \"inspiration\" images first.",
|
||
"You can create these images by run \"Create inspiration images\" script in txt2img page,": "You can create these images by run \"Create inspiration images\" script in txt2img page,",
|
||
"you can get the artists or art styles list from here": "you can get the artists or art styles list from here",
|
||
"download these files, and select these files in the \"Create inspiration images\" script UI": "download these files, and select these files in the \"Create inspiration images\" script UI",
|
||
"There about 6000 artists and art styles in these files.": "There about 6000 artists and art styles in these files.",
|
||
"This takes server hours depending on your GPU type and how many pictures you generate for each artist/style": "This takes server hours depending on your GPU type and how many pictures you generate for each artist/style",
|
||
"I suggest at least four images for each": "I suggest at least four images for each",
|
||
"You can also download generated pictures from here:": "You can also download generated pictures from here:",
|
||
"/extections/stable-diffusion-webui-inspiration": "/extections/stable-diffusion-webui-inspiration",
|
||
"Checkbox Group": "Checkbox Group",
|
||
"flavors": "flavors",
|
||
"mediums": "mediums",
|
||
"movements": "movements",
|
||
"Exclude abandoned": "Exclude abandoned",
|
||
"Abandoned": "Abandoned",
|
||
"Key word": "Key word",
|
||
"Get inspiration": "Get inspiration",
|
||
"to txt2img": "to txt2img",
|
||
"to img2img": "to img2img",
|
||
"Collect": "收藏 (保存)",
|
||
"Don't show again": "Don't show again",
|
||
"Maximum number of samples, used to determine which folders to skip when continue running the create script": "Maximum number of samples, used to determine which folders to skip when continue running the create script",
|
||
"stable-diffusion-webui-inspiration": "灵感",
|
||
"https://github.com/yfszzx/stable-diffusion-webui-inspiration.git": "https://github.com/yfszzx/stable-diffusion-webui-inspiration.git",
|
||
"-->": "→",
|
||
"<--": "←",
|
||
"zh-CN": "zh-CN",
|
||
"af": "af",
|
||
"sq": "sq",
|
||
"am": "am",
|
||
"ar": "ar",
|
||
"hy": "hy",
|
||
"az": "az",
|
||
"eu": "eu",
|
||
"be": "be",
|
||
"bn": "bn",
|
||
"bs": "bs",
|
||
"bg": "bg",
|
||
"ca": "ca",
|
||
"ceb": "ceb",
|
||
"ny": "ny",
|
||
"co": "co",
|
||
"hr": "hr",
|
||
"cs": "cs",
|
||
"da": "da",
|
||
"nl": "nl",
|
||
"en": "en",
|
||
"eo": "eo",
|
||
"et": "et",
|
||
"tl": "tl",
|
||
"fi": "fi",
|
||
"fr": "fr",
|
||
"fy": "fy",
|
||
"gl": "gl",
|
||
"ka": "ka",
|
||
"de": "de",
|
||
"el": "el",
|
||
"gu": "gu",
|
||
"ht": "ht",
|
||
"ha": "ha",
|
||
"haw": "haw",
|
||
"iw": "iw",
|
||
"hi": "hi",
|
||
"hmn": "hmn",
|
||
"hu": "hu",
|
||
"is": "is",
|
||
"ig": "ig",
|
||
"id": "id",
|
||
"ga": "ga",
|
||
"it": "it",
|
||
"ja": "ja",
|
||
"jw": "jw",
|
||
"kn": "kn",
|
||
"kk": "kk",
|
||
"km": "km",
|
||
"rw": "rw",
|
||
"ko": "ko",
|
||
"ku": "ku",
|
||
"ky": "ky",
|
||
"lo": "lo",
|
||
"la": "la",
|
||
"lv": "lv",
|
||
"lt": "lt",
|
||
"lb": "lb",
|
||
"mk": "mk",
|
||
"mg": "mg",
|
||
"ms": "ms",
|
||
"ml": "ml",
|
||
"mt": "mt",
|
||
"mi": "mi",
|
||
"mr": "mr",
|
||
"mn": "mn",
|
||
"ne": "ne",
|
||
"ps": "ps",
|
||
"fa": "fa",
|
||
"pl": "pl",
|
||
"pt": "pt",
|
||
"pa": "pa",
|
||
"ro": "ro",
|
||
"ru": "ru",
|
||
"sm": "sm",
|
||
"gd": "gd",
|
||
"sr": "sr",
|
||
"st": "st",
|
||
"sn": "sn",
|
||
"sd": "sd",
|
||
"si": "si",
|
||
"sk": "sk",
|
||
"sl": "sl",
|
||
"so": "so",
|
||
"es": "es",
|
||
"su": "su",
|
||
"sw": "sw",
|
||
"sv": "sv",
|
||
"tg": "tg",
|
||
"ta": "ta",
|
||
"tt": "tt",
|
||
"te": "te",
|
||
"th": "th",
|
||
"tr": "tr",
|
||
"tk": "tk",
|
||
"uk": "uk",
|
||
"ur": "ur",
|
||
"ug": "ug",
|
||
"uz": "uz",
|
||
"vi": "vi",
|
||
"cy": "cy",
|
||
"xh": "xh",
|
||
"yi": "yi",
|
||
"yo": "yo",
|
||
"zu": "zu",
|
||
"free_google": "free_google",
|
||
"free_youdao_zh": "free_youdao_zh",
|
||
"tp_alibaba": "tp_alibaba",
|
||
"tp_argos": "tp_argos",
|
||
"tp_baidu": "tp_baidu",
|
||
"tp_bing": "tp_bing",
|
||
"tp_caiyun": "tp_caiyun",
|
||
"tp_deepl": "tp_deepl",
|
||
"tp_google": "tp_google",
|
||
"tp_iciba": "tp_iciba",
|
||
"tp_iflytek": "tp_iflytek",
|
||
"tp_iflyrec": "tp_iflyrec",
|
||
"tp_itranslate": "tp_itranslate",
|
||
"tp_lingvanex": "tp_lingvanex",
|
||
"tp_mglip": "tp_mglip",
|
||
"tp_modernMt": "tp_modernMt",
|
||
"tp_myMemory": "tp_myMemory",
|
||
"tp_niutrans": "tp_niutrans",
|
||
"tp_papago": "tp_papago",
|
||
"tp_qqFanyi": "tp_qqFanyi",
|
||
"tp_qqTranSmart": "tp_qqTranSmart",
|
||
"tp_reverso": "tp_reverso",
|
||
"tp_sogou": "tp_sogou",
|
||
"tp_translateCom": "tp_translateCom",
|
||
"tp_utibet": "tp_utibet",
|
||
"tp_volcEngine": "tp_volcEngine",
|
||
"tp_yandex": "tp_yandex",
|
||
"tp_youdao": "tp_youdao",
|
||
"tp__alibaba": "tp__alibaba",
|
||
"tp__argos": "tp__argos",
|
||
"tp__baidu": "tp__baidu",
|
||
"tp__bing": "tp__bing",
|
||
"tp__caiyun": "tp__caiyun",
|
||
"tp__deepl": "tp__deepl",
|
||
"tp__google": "tp__google",
|
||
"tp__iciba": "tp__iciba",
|
||
"tp__iflytek": "tp__iflytek",
|
||
"tp__iflyrec": "tp__iflyrec",
|
||
"tp__itranslate": "tp__itranslate",
|
||
"tp__lingvanex": "tp__lingvanex",
|
||
"tp__mglip": "tp__mglip",
|
||
"tp__modernMt": "tp__modernMt",
|
||
"tp__myMemory": "tp__myMemory",
|
||
"tp__niutrans": "tp__niutrans",
|
||
"tp__papago": "tp__papago",
|
||
"tp__qqFanyi": "tp__qqFanyi",
|
||
"tp__qqTranSmart": "tp__qqTranSmart",
|
||
"tp__reverso": "tp__reverso",
|
||
"tp__sogou": "tp__sogou",
|
||
"tp__translateCom": "tp__translateCom",
|
||
"tp__utibet": "tp__utibet",
|
||
"tp__volcEngine": "tp__volcEngine",
|
||
"tp__yandex": "tp__yandex",
|
||
"tp__youdao": "tp__youdao",
|
||
"stable-diffusion-webui-auto-translate-language": "stable-diffusion-webui-auto-translate-language",
|
||
"https://github.com/hyd998877/stable-diffusion-webui-auto-translate-language": "https://github.com/hyd998877/stable-diffusion-webui-auto-translate-language",
|
||
"your select language": "選擇的語言",
|
||
"english": "英語",
|
||
"translate prompt.": "翻譯提示詞。",
|
||
"en2": "en2",
|
||
"translate negative prompt.": "翻譯反向提示詞。",
|
||
"N2": "N2",
|
||
"load": "載入",
|
||
"sd-discord-rich_presence": "sd-discord-rich_presence",
|
||
"https://github.com/davehornik/sd-discord-rich_presence": "https://github.com/davehornik/sd-discord-rich_presence",
|
||
"b675bf93 (Sun Apr 30 00:56:51 2023)": "b675bf93 (Sun Apr 30 00:56:51 2023)",
|
||
"Save to DB": "Save to DB",
|
||
"Database Name": "Database Name",
|
||
"Collection Name": "Collection Name",
|
||
"https://github.com/takoyaro/db-storage1111.git": "https://github.com/takoyaro/db-storage1111.git",
|
||
"Sub directories": "子目錄",
|
||
"Nothing selected": "未選取",
|
||
"Next Image After Ranking (To be implemented)": "Next Image After Ranking (To be implemented)",
|
||
"steps": "疊代步數",
|
||
"size": "尺寸",
|
||
"filename keyword": "檔名關鍵字",
|
||
"Renew Page": "刷新頁面",
|
||
"set_index": "設定索引",
|
||
"load_switch": "載入開關",
|
||
"to_dir_load_switch": "to_dir_load_switch",
|
||
"turn_page_switch": "翻頁開關",
|
||
"Preload images at startup": "在啟動時預加載圖像",
|
||
"Scan Exif-/.txt-data (slower, but required for exif-keyword-search)": "扫描图片的 Exif 信息与同名 txt 文件（会拖慢读取速度，但使用搜索生成信息关键字的时候必须开启）",
|
||
"stable-diffusion-webui-images-browser": "stable-diffusion-webui-images-browser",
|
||
"https://github.com/AlUlkesh/stable-diffusion-webui-images-browser.git": "https://github.com/AlUlkesh/stable-diffusion-webui-images-browser.git",
|
||
"Torch": "Torch",
|
||
"Libs": "Libs",
|
||
"Repos": "Repos",
|
||
"gpu": "gpu",
|
||
"optimizations": "optimizations",
|
||
"Refresh bench": "Refresh bench",
|
||
"Refresh state": "Refresh state",
|
||
"sd-extension-system-info": "系统信息面板",
|
||
"https://github.com/vladmandic/sd-extension-system-info": "https://github.com/vladmandic/sd-extension-system-info",
|
||
"70ab5cf3 (Sat Apr 29 21:35:48 2023)": "70ab5cf3 (Sat Apr 29 21:35:48 2023)",
|
||
"Suggestion is to leave the prompt field empty, anything here will be added at the end of the generated prompt.": "Suggestion is to leave the prompt field empty, anything here will be added at the end of the generated prompt.",
|
||
"It doesn’t add anything to the negative prompt field, so feel free to add your favorite negative prompts here.": "It doesn’t add anything to the negative prompt field, so feel free to add your favorite negative prompts here.",
|
||
"You can turn it off. Add your own artists to the prompt, and they will be added to the end of the prompt.": "You can turn it off. Add your own artists to the prompt, and they will be added to the end of the prompt.",
|
||
"prompt 3": "提示词③",
|
||
"Keep at 1 for normal behavior.": "Keep at 1 for normal behavior.",
|
||
"Set to different values to compound that many prompts together. My suggestion is to try 2 first.": "Set to different values to compound that many prompts together. My suggestion is to try 2 first.",
|
||
"This was originally a bug in the first release when using multiple batches, now brought back as a feature.": "This was originally a bug in the first release when using multiple batches, now brought back as a feature.",
|
||
"Raised by redditor drone2222, to bring this back as a toggle, since it did create interesting results. So here it is.": "Raised by redditor drone2222, to bring this back as a toggle, since it did create interesting results. So here it is.",
|
||
"OneButtonPrompt": "OneButtonPrompt",
|
||
"https://github.com/AIrjen/OneButtonPrompt": "https://github.com/AIrjen/OneButtonPrompt",
|
||
"8bd1129c (Sat May 13 18:36:12 2023)": "8bd1129c (Sat May 13 18:36:12 2023)",
|
||
"all - force multiple": "all - force multiple",
|
||
"only other types": "only other types",
|
||
"BREAK": "BREAK",
|
||
"Cutoff": "Cutoff",
|
||
"SLerp": "SLerp",
|
||
"Cutoff Enabled": "Cutoff Enabled",
|
||
"Cutoff Targets": "Cutoff Targets",
|
||
"Cutoff Weight": "Cutoff Weight",
|
||
"Cutoff Disable for Negative Prompt": "Cutoff Disable for Negative Prompt",
|
||
"Cutoff Strong": "Cutoff Strong",
|
||
"Cutoff Padding": "Cutoff Padding",
|
||
"Cutoff Interpolation": "Cutoff Interpolation",
|
||
"sd-webui-cutoff": "sd-webui-cutoff",
|
||
"https://github.com/hnmr293/sd-webui-cutoff.git": "https://github.com/hnmr293/sd-webui-cutoff.git",
|
||
"red, blue": "red, blue",
|
||
"Posex": "Posex",
|
||
"Target ControlNet number": "目標 ControlNet 號碼",
|
||
"https://github.com/hnmr293/posex.git": "https://github.com/hnmr293/posex.git",
|
||
"Training Picker": "訓練圖挑選器",
|
||
"Video to extract frames from:": "要從中提取幀的影片：",
|
||
"Only extract keyframes (recommended)": "只提取關鍵幀（推薦）",
|
||
"Extract every nth frame": "每第 n 幀提取一次",
|
||
"Extract Frames": "提取幀",
|
||
"Extracted Frame Set": "提取好的幀",
|
||
"Resize crops to 512x512": "縮放裁剪至 512x512",
|
||
"Outfill method:": "填充方法：",
|
||
"Stretch image": "拉伸圖像",
|
||
"Solid color": "純色",
|
||
"Average image color": "平均圖像顏色",
|
||
"Stretch pixels at border": "延伸邊緣的畫素",
|
||
"Reflect image around border": "從邊緣鏡像圖像內容",
|
||
"Blurred & stretched overlay": "模糊拉伸的疊加層",
|
||
"Reset Aspect Ratio": "重置縱橫比",
|
||
"Image border outfill method:": "圖像邊緣的填充方法：",
|
||
"Black outfill": "填黑",
|
||
"Outfill border color:": "填充顏色：",
|
||
"Number of clusters:": "簇數：",
|
||
"Save crops to:": "儲存裁剪好的成品到：",
|
||
"Fixed size to resize images to": "調整圖像大小到固定大小",
|
||
"Path to read videos from": "讀取影片的路徑",
|
||
"Path to store extracted frame sets in": "儲存截取幀的路徑",
|
||
"Default cropped image output directory": "裁切後的成品的默認輸出目錄",
|
||
"https://github.com/Maurdekye/training-picker.git": "https://github.com/Maurdekye/training-picker.git",
|
||
"CLIP_test": "CLIP_test",
|
||
"Create Beta hypernetwork": "Create Beta hypernetwork",
|
||
"Train_Gamma": "Train_Gamma",
|
||
"Train_Tuning": "Train_Tuning",
|
||
"Show advanced options": "Show advanced options",
|
||
"Weight initialization seed, set -1 for default": "Weight initialization seed, set -1 for default",
|
||
"Standard Deviation for Normal weight initialization": "Standard Deviation for Normal weight initialization",
|
||
"Use dropout. Might improve training when dataset is small / limited.": "Use dropout. Might improve training when dataset is small / limited.",
|
||
"Use skip-connection. Won't work without extension!": "Use skip-connection. Won't work without extension!",
|
||
"Optional information about Hypernetwork": "Optional information about Hypernetwork",
|
||
"Setting file name": "Setting file name",
|
||
"Save hypernetwork setting to file": "Save hypernetwork setting to file",
|
||
"Train an embedding or Hypernetwork; you must specify a directory": "Train an embedding or Hypernetwork; you must specify a directory",
|
||
"Show advanced learn rate scheduler options": "Show advanced learn rate scheduler options",
|
||
"Show advanced adamW parameter options)": "Show advanced adamW parameter options)",
|
||
"Show Gradient Clipping Options(for both)": "Show Gradient Clipping Options(for both)",
|
||
"Show Noise Scheduler Options(for both)": "Show Noise Scheduler Options(for both)",
|
||
"Uses D-Adaptation(LR Free) AdamW. Recommended LR is 1.0 at base": "Uses D-Adaptation(LR Free) AdamW. Recommended LR is 1.0 at base",
|
||
"AdamW weight decay parameter": "AdamW 权重衰减参数 (Weight Decay)",
|
||
"AdamW beta1 parameter": "AdamW beta1 parameter",
|
||
"AdamW beta2 parameter": "AdamW beta2 parameter",
|
||
"AdamW epsilon parameter": "AdamW epsilon parameter",
|
||
"Growth factor limiting, use value like 1.02 or leave it as -1": "Growth factor limiting, use value like 1.02 or leave it as -1",
|
||
"Use CosineAnnealingWarmupRestarts Scheduler": "Use CosineAnnealingWarmupRestarts Scheduler",
|
||
"Steps for cycle": "Steps for cycle",
|
||
"Step multiplier per cycle": "Step multiplier per cycle",
|
||
"Warmup step per cycle": "Warmup step per cycle",
|
||
"Minimum learning rate": "Minimum learning rate",
|
||
"Decays learning rate every cycle": "Decays learning rate every cycle",
|
||
"Saves when every cycle finishes": "Saves when every cycle finishes",
|
||
"Generates image when every cycle finishes": "Generates image when every cycle finishes",
|
||
"Gradient Clipping Options": "Gradient Clipping Options",
|
||
"limit": "limit",
|
||
"Limiting value": "Limiting value",
|
||
"Norm type": "Norm type",
|
||
"Use Noise training scheduler(test)": "Use Noise training scheduler(test)",
|
||
"Restarts noise scheduler, or linear": "Restarts noise scheduler, or linear",
|
||
"Restarts noise scheduler every nth epoch": "Restarts noise scheduler every nth epoch",
|
||
"Unload Optimizer when generating preview(hypernetwork)": "Unload Optimizer when generating preview(hypernetwork)",
|
||
"Standard deviation for sampling": "Standard deviation for sampling",
|
||
"loss type": "loss type",
|
||
"loss": "loss",
|
||
"loss_simple": "loss_simple",
|
||
"loss_vlb": "loss_vlb",
|
||
"Save training setting": "Save training setting",
|
||
"File name to save setting as": "File name to save setting as",
|
||
"Load training option from saved json file. This will override settings above": "Load training option from saved json file. This will override settings above",
|
||
"Train Hypernetwork; you must specify a directory": "Train Hypernetwork; you must specify a directory",
|
||
"Hypernetwork name to create, leave it empty to use selected": "Hypernetwork name to create, leave it empty to use selected",
|
||
"Load Hypernetwork creation option from saved json file": "Load Hypernetwork creation option from saved json file",
|
||
"Load training option(s) from saved json file": "Load training option(s) from saved json file",
|
||
"Save a copy of model to log directory every N steps, 0 to disable": "Save a copy of model to log directory every N steps, 0 to disable",
|
||
"Manual dataset seed": "Manual dataset seed",
|
||
"CLIP-test": "CLIP-test",
|
||
"CLIP Text models. Set to empty to not change.": "CLIP Text models. Set to empty to not change.",
|
||
"Enable clip model change. This will be triggered from next model changes.": "Enable clip model change. This will be triggered from next model changes.",
|
||
"Detach grad from conditioning models": "Detach grad from conditioning models",
|
||
"Hypernetwork-MonkeyPatch-Extension": "Hypernetwork-MonkeyPatch-Extension",
|
||
"must be positive float": "must be positive float",
|
||
"Training information, dateset, etc": "Training information, dateset, etc",
|
||
"default = 0.01": "default = 0.01",
|
||
"default = 0.9": "default = 0.9",
|
||
"default = 0.99": "default = 0.99",
|
||
"default = 1e-8": "default = 1e-8",
|
||
"Cycles every nth Step": "Cycles every nth Step",
|
||
"Step length multiplier every cycle": "Step length multiplier every cycle",
|
||
"CosineAnnealing lr increase step": "CosineAnnealing lr increase step",
|
||
"restricts decay value, but does not restrict gamma rate decay": "restricts decay value, but does not restrict gamma rate decay",
|
||
"Value should be in (0-1]": "Value should be in (0-1]",
|
||
". filename cannot have ',' inside, and files should be splitted by ','.": ". filename cannot have ',' inside, and files should be splitted by ','.",
|
||
"https://github.com/aria1th/Hypernetwork-MonkeyPatch-Extension.git": "https://github.com/aria1th/Hypernetwork-MonkeyPatch-Extension.git",
|
||
"img": "img",
|
||
"G": "G",
|
||
"sigma": "sigma",
|
||
"k_sigma": "k_sigma",
|
||
"epsilon": "epsilon",
|
||
"phi": "phi",
|
||
"BS": "BS",
|
||
"BMBL": "BMBL",
|
||
"a1111-sd-webui-haku-img": "a1111-sd-webui-haku-img",
|
||
"https://github.com/KohakuBlueleaf/a1111-sd-webui-haku-img.git": "https://github.com/KohakuBlueleaf/a1111-sd-webui-haku-img.git",
|
||
"https://github.com/KohakuBlueleaf/a1111-sd-webui-lycoris": "https://github.com/KohakuBlueleaf/a1111-sd-webui-lycoris",
|
||
"4d74a7b8 (Mon May 1 15:03:03 2023)": "4d74a7b8 (Mon May 1 15:03:03 2023)",
|
||
"weight_gradient": "weight_gradient",
|
||
"https://github.com/DingoBite/weight_gradient": "https://github.com/DingoBite/weight_gradient",
|
||
"8aedef42 (Sun May 14 20:30:57 2023)": "8aedef42 (Sun May 14 20:30:57 2023)",
|
||
"Log in console": "Log in console",
|
||
"FigureBracesEXIF": "FigureBracesEXIF",
|
||
"Documentation": "Documentation",
|
||
"Modes Hint": "Modes Hint",
|
||
"Form": "Form",
|
||
"Required. Tokens": "Required. Tokens",
|
||
"Required. Weight start to end range": "Required. Weight start to end range",
|
||
"Steps where weight changes": "Steps where weight changes",
|
||
"Weight move to return weight": "Weight move to return weight",
|
||
"Gradient mode (e, ei, eo, c, ci, co)": "Gradient mode (e, ei, eo, c, ci, co)",
|
||
"Linear decreasing from 1 to 0 in 20% of steps (10% - 30%)": "Linear decreasing from 1 to 0 in 20% of steps (10% - 30%)",
|
||
"Exponencial decreasing from 1 to 0 in 8 steps then increasing from 0 to 1 in 7 steps": "Exponencial decreasing from 1 to 0 in 8 steps then increasing from 0 to 1 in 7 steps",
|
||
"Circle increasing from 0 to 1 at every step": "Circle increasing from 0 to 1 at every step",
|
||
"Circle": "Circle",
|
||
"CircleIn": "CircleIn",
|
||
"CircleOut": "CircleOut",
|
||
"Exponential": "Exponential",
|
||
"ExponentialIn": "ExponentialIn",
|
||
"ExponentialOut": "ExponentialOut",
|
||
"Click to view actions": "Click to view actions",
|
||
"Save as SVG": "Save as SVG",
|
||
"Save as PNG": "Save as PNG",
|
||
"View Source": "View Source",
|
||
"View Compiled Vega": "View Compiled Vega",
|
||
"Open in Vega Editor": "Open in Vega Editor",
|
||
"Save intermediate images": "Save intermediate images",
|
||
"sd_save_intermediate_images": "sd_save_intermediate_images",
|
||
"https://github.com/AlUlkesh/sd_save_intermediate_images": "https://github.com/AlUlkesh/sd_save_intermediate_images",
|
||
"8115a847 (Mon Mar 27 13:58:26 2023)": "8115a847 (Mon Mar 27 13:58:26 2023)",
|
||
"Also save final image with intermediates": "同时保存最终图像和中间过程的图像",
|
||
"Type of images to be saved": "Type of images to be saved",
|
||
"Denoised": "已降噪",
|
||
"Noisy": "Noisy",
|
||
"Save every N images": "Save every N images",
|
||
"Start at N images (must be 0 = start at the beginning or a multiple of 'Save every N images')": "Start at N images (must be 0 = start at the beginning or a multiple of 'Save every N images')",
|
||
"Stop at N images (must be 0 = don't stop early or a multiple of 'Save every N images')": "Stop at N images (must be 0 = don't stop early or a multiple of 'Save every N images')",
|
||
"Make a video file": "Make a video file",
|
||
"Save intermediates with image number as suffix": "Save intermediates with image number as suffix",
|
||
"Standard operation": "Standard operation",
|
||
"mp4 parameters": "mp4 parameters",
|
||
"h264": "h264",
|
||
"h265/hevc": "h265/hevc",
|
||
"av1": "av1",
|
||
"Display last image for additional frames at the beginning": "Display last image for additional frames at the beginning",
|
||
"Display last image for additional frames at the end": "Display last image for additional frames at the end",
|
||
"Smoothing / Interpolate": "Smoothing / Interpolate",
|
||
"Approx. how many seconds should the video run?": "Approx. how many seconds should the video run?",
|
||
"fps >= 30 recommended, caution: generates large gif-files": "fps >= 30 recommended, caution: generates large gif-files",
|
||
"lores": "lores",
|
||
"hires": "hires",
|
||
"Create Windows ffmpeg bat-files for lores and hires. Changes numbering logic.": "Create Windows ffmpeg bat-files for lores and hires. Changes numbering logic.",
|
||
"Only bat-files, no video": "Only bat-files, no video",
|
||
"Outpaint": "Outpaint",
|
||
"Post proccess": "Post proccess",
|
||
"Total Outpaint Steps": "Total Outpaint Steps",
|
||
"The more it is, the longer your videos will be": "The more it is, the longer your videos will be",
|
||
"outpaint steps": "outpaint steps",
|
||
"Huge spectacular Waterfall in a dense tropical forest,epic perspective,(vegetation overgrowth:1.3)(intricate, ornamentation:1.1),(baroque:1.1), fantasy, (realistic:1) digital painting , (magical,mystical:1.2) , (wide angle shot:1.4), (landscape composed:1.2)(medieval:1.1), divine,cinematic,(tropical forest:1.4),(river:1.3)mythology,india, volumetric lighting, Hindu ,epic, Alex Horley Wenjun Lin greg rutkowski Ruan Jia (Wayne Barlowe:1.2) <lora:epiNoiseoffset_v2:0.6>": "Huge spectacular Waterfall in a dense tropical forest,epic perspective,(vegetation overgrowth:1.3)(intricate, ornamentation:1.1),(baroque:1.1), fantasy, (realistic:1) digital painting , (magical,mystical:1.2) , (wide angle shot:1.4), (landscape composed:1.2)(medieval:1.1), divine,cinematic,(tropical forest:1.4),(river:1.3)mythology,india, volumetric lighting, Hindu ,epic, Alex Horley Wenjun Lin greg rutkowski Ruan Jia (Wayne Barlowe:1.2) <lora:epiNoiseoffset_v2:0.6>",
|
||
"Export prompts": "Export prompts",
|
||
"Import prompts": "Import prompts",
|
||
"Clear prompts": "Clear prompts",
|
||
"Output Width": "Output Width",
|
||
"Output Height": "Output Height",
|
||
"Guidance Scale": "Guidance Scale",
|
||
"Sampling Steps for each outpaint": "Sampling Steps for each outpaint",
|
||
"custom initial image": "custom initial image",
|
||
"custom exit image": "custom exit image",
|
||
"Batch Count": "Batch Count",
|
||
"Zoom mode": "Zoom mode",
|
||
"Zoom-out": "Zoom-out",
|
||
"Zoom-in": "Zoom-in",
|
||
"number of start frame dupe": "number of start frame dupe",
|
||
"Frames to freeze at the start of the video": "Frames to freeze at the start of the video",
|
||
"number of last frame dupe": "number of last frame dupe",
|
||
"Frames to freeze at the end of the video": "Frames to freeze at the end of the video",
|
||
"Zoom Speed": "Zoom Speed",
|
||
"Zoom speed in seconds (higher values create slower zoom)": "Zoom speed in seconds (higher values create slower zoom)",
|
||
"Denoising Strength": "Denoising Strength",
|
||
"Inpaint Full Resolution": "Inpaint Full Resolution",
|
||
"masked padding": "masked padding",
|
||
"Enable Upscale": "Enable Upscale",
|
||
"Upscale by factor": "Upscale by factor",
|
||
"Path where to store your infinite video. Default is Outputs": "Path where to store your infinite video. Default is Outputs",
|
||
"Which subfolder name to be created in the outpath. Default is 'infinite-zooms'": "Which subfolder name to be created in the outpath. Default is 'infinite-zooms'",
|
||
"Default width of your video": "Default width of your video",
|
||
"Default height your video": "Default height your video",
|
||
"Writing videos has dependency to an existing FFPROBE executable on your machine. D/L here (https://github.com/BtbN/FFmpeg-Builds/releases) your OS variant and point to your installation path": "Writing videos has dependency to an existing FFPROBE executable on your machine. D/L here (https://github.com/BtbN/FFmpeg-Builds/releases) your OS variant and point to your installation path",
|
||
"Name of your desired model to render keyframes (txt2img)": "Name of your desired model to render keyframes (txt2img)",
|
||
"Name of your desired inpaint model (img2img-inpaint). Default is vanilla sd-v1-5-inpainting.ckpt": "Name of your desired inpaint model (img2img-inpaint). Default is vanilla sd-v1-5-inpainting.ckpt",
|
||
"Default prompt-setup to start with'": "Default prompt-setup to start with'",
|
||
"infinite-zoom-automatic1111-webui": "infinite-zoom-automatic1111-webui",
|
||
"https://github.com/v8hid/infinite-zoom-automatic1111-webui": "https://github.com/v8hid/infinite-zoom-automatic1111-webui",
|
||
"28a1a0f4 (Sat Apr 29 11:45:36 2023)": "28a1a0f4 (Sat Apr 29 11:45:36 2023)",
|
||
"Resume": "Resume",
|
||
"No Rows To Show": "No Rows To Show",
|
||
"of": "of",
|
||
"Disable queue auto-processing": "Disable queue auto-processing",
|
||
"Queue button placement": "Queue button placement",
|
||
"Under Generate button": "Under Generate button",
|
||
"Between Prompt and Generate button": "Between Prompt and Generate button",
|
||
"Hide the checkpoint dropdown": "Hide the checkpoint dropdown",
|
||
"Auto delete queue history (bookmarked tasks excluded)": "Auto delete queue history (bookmarked tasks excluded)",
|
||
"7 days": "7 days",
|
||
"14 days": "14 days",
|
||
"30 days": "30 days",
|
||
"90 days": "90 days",
|
||
"Keep forever": "Keep forever",
|
||
"Enqueue keyboard shortcut": "Enqueue keyboard shortcut",
|
||
"Key": "Key",
|
||
"Disable keyboard shortcut": "Disable keyboard shortcut",
|
||
"Task queue UI placement": "Task queue UI placement",
|
||
"As a tab": "As a tab",
|
||
"Append to main UI": "Append to main UI",
|
||
"sd-webui-agent-scheduler": "Agent Scheduler 任務排程代理",
|
||
"https://github.com/ArtVentureX/sd-webui-agent-scheduler": "https://github.com/ArtVentureX/sd-webui-agent-scheduler",
|
||
"[name]": "[name]",
|
||
"[extension]": "[extension]",
|
||
"[hash:<algorithms>]": null,
|
||
"sha1, blake2s, shake_256, sha256, md5-sha1, sha512_256, shake_128, mdc2, ripemd160, whirlpool, md5, sha3_384, sha512, sha3_512, blake2b, sha224, sm3, sha512_224, sha3_224, sha384, md4, sha3_256": "sha1, blake2s, shake_256, sha256, md5-sha1, sha512_256, shake_128, mdc2, ripemd160, whirlpool, md5, sha3_384, sha512, sha3_512, blake2b, sha224, sm3, sha512_224, sha3_224, sha384, md4, sha3_256",
|
||
"[output_extension]": "[output_extension]",
|
||
"[name].[output_extension]": "[name].[output_extension]",
|
||
"Original file's hash (good for deleting duplication)": "原始文件的哈希值（有利于删除重复项）",
|
||
"[hash:sha1].[output_extension]": "[hash:sha1].[output_extension]",
|
||
"default.json": "default.json",
|
||
"wd14-convnext": "wd14-convnext",
|
||
"wd14-convnext-v2": "wd14-convnext-v2",
|
||
"wd14-convnext-v2-git": "wd14-convnext-v2-git",
|
||
"wd14-swinv2-v2": "wd14-swinv2-v2",
|
||
"wd14-swinv2-v2-git": "wd14-swinv2-v2-git",
|
||
"wd14-vit": "wd14-vit",
|
||
"wd14-vit-v2": "wd14-vit-v2",
|
||
"wd14-vit-v2-git": "wd14-vit-v2-git",
|
||
"stable-diffusion-webui-wd14-tagger": "stable-diffusion-webui-wd14-tagger",
|
||
"https://github.com/toriato/stable-diffusion-webui-wd14-tagger.git": "https://github.com/toriato/stable-diffusion-webui-wd14-tagger.git",
|
||
"Leave blank to use same filename as original.": "留空时将使用与原文件相同的文件名",
|
||
"NAIConvert": "NAI轉換",
|
||
"https://github.com/animerl/novelai-2-local-prompt.git": "https://github.com/animerl/novelai-2-local-prompt.git",
|
||
"Resblock": "残差块（用于残差神经网络 ResNet）",
|
||
"Transformer": "变换器",
|
||
"S. Attn.": "S. Attn.",
|
||
"X. Attn.": "X. Attn.",
|
||
"LLuL Enabled": "LLuL Enabled",
|
||
"LLuL Multiply": "LLuL Multiply",
|
||
"LLuL Weight": "LLuL Weight",
|
||
"LLuL Layers": "LLuL Layers",
|
||
"LLuL Apply to": "LLuL Apply to",
|
||
"LLuL Start steps": "LLuL Start steps",
|
||
"LLuL Max steps": "LLuL Max steps",
|
||
"LLuL Upscaler": "LLuL Upscaler",
|
||
"LLuL Upscaler AA": "LLuL Upscaler AA",
|
||
"LLuL Downscaler": "LLuL Downscaler",
|
||
"LLuL Downscaler AA": "LLuL Downscaler AA",
|
||
"LLuL Interpolation method": "LLuL Interpolation method",
|
||
"sd-webui-llul": "sd-webui-llul",
|
||
"https://github.com/hnmr293/sd-webui-llul.git": "https://github.com/hnmr293/sd-webui-llul.git",
|
||
"Localization dirs": "本地化路徑",
|
||
"sd-webui-bilingual-localization": "sd-webui-bilingual-localization",
|
||
"https://github.com/journey-ad/sd-webui-bilingual-localization.git": "https://github.com/journey-ad/sd-webui-bilingual-localization.git",
|
||
"Most frequent tags in captions": "訓練用描述最常用的標記",
|
||
"Repeats": "重複",
|
||
"Total Images": "圖像總數",
|
||
"sd-webui-additional-networks": "sd-webui-additional-networks",
|
||
"https://github.com/kohya-ss/sd-webui-additional-networks.git": "https://github.com/kohya-ss/sd-webui-additional-networks.git",
|
||
"Tokenizer": "標記解析器",
|
||
"Before your text is sent to the neural network, it gets turned into numbers in a process called tokenization. These tokens are how the neural network reads and interprets text. Thanks to our great friends at Shousetsu愛 for inspiration for this feature.": "在你的文本被發送到神經網路之前，它在一個稱為標記化的過程中被轉化為數字。這些標記是神經網路閱讀和解釋文本的方式。感謝我們的好朋友 Shousetsu愛 為這個功能帶來的靈感",
|
||
"ID input": "ID 輸入",
|
||
"Tokens": "標記",
|
||
"stable-diffusion-webui-tokenizer": "词元分析器(tokenizer)",
|
||
"Prompt for tokenization": "給標記化準備的提示詞",
|
||
"Ids for tokenization (example: 9061, 631, 736)": "用於標記化的 ID（例：9061，631，736）",
|
||
"https://github.com/AUTOMATIC1111/stable-diffusion-webui-tokenizer.git": "https://github.com/AUTOMATIC1111/stable-diffusion-webui-tokenizer.git",
|
||
"json": "json",
|
||
"openpose-editor": "openPose 編輯器",
|
||
"https://github.com/fkunn1326/openpose-editor.git": "https://github.com/fkunn1326/openpose-editor.git",
|
||
"Artists To Study": "藝術家圖庫",
|
||
"dog": "dog",
|
||
"house": "house",
|
||
"spaceship": "spaceship",
|
||
"digipa-high-impact": "digipa-high-impact",
|
||
"digipa-med-impact": "digipa-med-impact",
|
||
"digipa-low-impact": "digipa-low-impact",
|
||
"fareast": "fareast",
|
||
"fineart": "fineart",
|
||
"scribbles": "scribbles",
|
||
"special": "special",
|
||
"ukioe": "ukioe",
|
||
"weird": "weird",
|
||
"black-white": "black-white",
|
||
"c": "c",
|
||
"n": "n",
|
||
"Get Images": "Get Images",
|
||
"dog-anime": "dog-anime",
|
||
"dog-cartoon": "dog-cartoon",
|
||
"dog-digipa-high-impact": "dog-digipa-high-impact",
|
||
"dog-digipa-med-impact": "dog-digipa-med-impact",
|
||
"dog-digipa-low-impact": "dog-digipa-low-impact",
|
||
"dog-fareast": "dog-fareast",
|
||
"dog-fineart": "dog-fineart",
|
||
"dog-scribbles": "dog-scribbles",
|
||
"dog-special": "dog-special",
|
||
"dog-ukioe": "dog-ukioe",
|
||
"dog-weird": "dog-weird",
|
||
"dog-black-white": "dog-black-white",
|
||
"dog-nudity": "dog-nudity",
|
||
"dog-c": "dog-c",
|
||
"dog-n": "dog-n",
|
||
"house-anime": "house-anime",
|
||
"house-cartoon": "house-cartoon",
|
||
"house-digipa-high-impact": "house-digipa-high-impact",
|
||
"house-digipa-med-impact": "house-digipa-med-impact",
|
||
"house-digipa-low-impact": "house-digipa-low-impact",
|
||
"house-fareast": "house-fareast",
|
||
"house-fineart": "house-fineart",
|
||
"house-scribbles": "house-scribbles",
|
||
"house-special": "house-special",
|
||
"house-ukioe": "house-ukioe",
|
||
"house-weird": "house-weird",
|
||
"house-black-white": "house-black-white",
|
||
"house-nudity": "house-nudity",
|
||
"house-c": "house-c",
|
||
"house-n": "house-n",
|
||
"portrait-anime": "portrait-anime",
|
||
"portrait-cartoon": "portrait-cartoon",
|
||
"portrait-digipa-high-impact": "portrait-digipa-high-impact",
|
||
"portrait-digipa-med-impact": "portrait-digipa-med-impact",
|
||
"portrait-digipa-low-impact": "portrait-digipa-low-impact",
|
||
"portrait-fareast": "portrait-fareast",
|
||
"portrait-fineart": "portrait-fineart",
|
||
"portrait-scribbles": "portrait-scribbles",
|
||
"portrait-special": "portrait-special",
|
||
"portrait-ukioe": "portrait-ukioe",
|
||
"portrait-weird": "portrait-weird",
|
||
"portrait-black-white": "portrait-black-white",
|
||
"portrait-nudity": "portrait-nudity",
|
||
"portrait-c": "portrait-c",
|
||
"portrait-n": "portrait-n",
|
||
"spaceship-anime": "spaceship-anime",
|
||
"spaceship-cartoon": "spaceship-cartoon",
|
||
"spaceship-digipa-high-impact": "spaceship-digipa-high-impact",
|
||
"spaceship-digipa-med-impact": "spaceship-digipa-med-impact",
|
||
"spaceship-digipa-low-impact": "spaceship-digipa-low-impact",
|
||
"spaceship-fareast": "spaceship-fareast",
|
||
"spaceship-fineart": "spaceship-fineart",
|
||
"spaceship-scribbles": "spaceship-scribbles",
|
||
"spaceship-special": "spaceship-special",
|
||
"spaceship-ukioe": "spaceship-ukioe",
|
||
"spaceship-weird": "spaceship-weird",
|
||
"spaceship-black-white": "spaceship-black-white",
|
||
"spaceship-nudity": "spaceship-nudity",
|
||
"spaceship-c": "spaceship-c",
|
||
"spaceship-n": "spaceship-n",
|
||
"artists to study extension by camenduru |": "artists to study extension by camenduru |",
|
||
"twitter": "twitter",
|
||
"youtube": "youtube",
|
||
"hi-res images": "hi-res images",
|
||
"All images generated with CompVis/stable-diffusion-v1-4 +": "All images generated with CompVis/stable-diffusion-v1-4 +",
|
||
"artists.csv": "artists.csv",
|
||
"| License: Attribution 4.0 International (CC BY 4.0)": "| License: Attribution 4.0 International (CC BY 4.0)",
|
||
"stable-diffusion-webui-artists-to-study": "艺术家图库",
|
||
"https://github.com/camenduru/stable-diffusion-webui-artists-to-study.git": "https://github.com/camenduru/stable-diffusion-webui-artists-to-study.git",
|
||
"https://github.com/Bing-su/sd-webui-tunnels.git": "https://github.com/Bing-su/sd-webui-tunnels.git",
|
||
"5 times instead of 4.": "5 次而非 4 次。",
|
||
"a bit better, but it conflicted with less-than, greater-than logic operators. This means that older templates may not work in v2.0.0, which is a bit of a pain. I only make breaking changes like this when I feel it's worthwhile.": "略优一点，但它与小于 (<)、大于 (>) 逻辑运算符有冲突，这意味着旧的模板可能无法在 v2.0.0 中使用，这有点麻烦。只有在值得这样做的时候，才会进行破坏性的改变。",
|
||
"accelerate": "加速",
|
||
"Action on exiting caption": null,
|
||
"Activate 'Show results in WebUI' checkbox to see results in the WebUI at the end (not recommended when processing a large number of images)": "激活“在 WebUI 中显示结果”复选框，以在结束时在 WebUI 上查看结果（处理大量图像时不建议使用）",
|
||
"Activate the 'Masks only' checkbox to see how many faces do your current settings detect without generating SD image. (check console)": "激活“仅蒙版”选项，即可不生图就能看到当前设置能检测到多少张脸。（请在控制台查看）",
|
||
"actual FPS": "实际帧率（帧每秒）",
|
||
"Actual FPS": "实际帧率（帧每秒）",
|
||
"Actual total duration": "实际总时长",
|
||
"Actual total frames": "实际总帧数",
|
||
"Adam Epsilon": "Adam Epsilon (替代 0 的常量，防止直接除以 0)",
|
||
"Adaptive change:": "适应性变换：",
|
||
"Adaptive Change:": "适应性变换",
|
||
"Add a random artist to the prompt.": "随机添加一个艺术家到提示词中",
|
||
"Add custom keyword(trigger word) mapping for current model. Custom mappings are saved to extensions/model-keyword/custom-mappings.txt": "为当前模型添加自定义关键词（触发词）映射。自定义映射将保存到extensions/model-keyword/custom-mappings.txt",
|
||
"Add custom keyword(trigger word) mapping for selected LORA model.": "为选定的 LORA 模型添加自定义关键词（触发词）映射",
|
||
"Add DeepDanbooru Tags to Caption": "将 DeepDanbooru 标签添加到描述文本中",
|
||
"Additionally, I would like to overhaul the extension UI as well as the github docs. Both of these were hastily thrown together and could benefit from a lot of polish. You can expect improvements in these areas over the next few updates!": "另外，我还想仔细修改下extension UI以及 GitHub 文档。它们都是匆忙制作的，有待进一步完善。请期待在接下来几次更新中这些方面的改进！",
|
||
"Additionally, you can now specify": "此外，您现在可以指定",
|
||
"Add Noise": "增加噪声",
|
||
"Adds a tab for doing img2img editing with the instruct-pix2pix model. Note: No longer required. Author has integrated code to webui, use in img2img.": "添加一个选项卡，用于使用instruction-pix2pix模型进行图生图编辑。注：不再需要，作者已将代码集成到webui，在图生图中使用。",
|
||
"Add the image's number to its picture in the grid (when 'Add number to filename' is on)": "为网格中的图片添加编号（需开启“添加编号到文件名”）",
|
||
": a dictionary of the shortcode's keyword arguments.": "简码关键字参数的字典",
|
||
"A directory or a file. Keep this empty to use the alpha channel of image as mask": "填入目录或文件。保持为空以使用图像的alpha通道作为遮罩",
|
||
"Adjust desired FPS if needed/wanted. Default slider position is original FPS.": "调整所需的 FPS。默认滑块位置为原始 FPS。",
|
||
"Advanced Seed Blending": "高级种子混合",
|
||
"Aesthetic scorer": "美学评分器",
|
||
"All notable changes to this project will be documented in this file.": "此项目中的所有显著更改都将被记录在本文档中",
|
||
"All of the code in this guide refers to our example.txt file unless otherwise noted. Remember to save your file with each change!": "除非另有声明，否则本指南中的所有代码都参考于我们的 example.txt 文档。每次修改后，记得保存你的文档！",
|
||
"Allowed categories for random artists selection when using the Roll button": "使用抽选艺术家按钮时将会随机的艺术家类别",
|
||
"Allows the Web UI to use networks (LoRA) trained by their scripts to generate images.": "允许 Web UI 使用 由其脚本训练的网络（LoRA）生成图像",
|
||
"allows you to create a region for inpainting based only on the text content (as opposed to the brush tool.) This shortcode only works in the img2img tab of the A1111 WebUI.": "可以基于文本创建重绘区域（而无需使用画笔）。注意此代码仅可在A1111 WebUI的图生图中使用。",
|
||
"Allows you to include various shortcodes in your prompts. You can pull text from files, set up your own variables, process text through conditional functions, and so much more - it's like wildcards on steroids.": "允许你在提示词中包含各种短代码。 你可以从文件中提取文本、设置自己的变量、通过条件函数处理文本等等 - 就像是增强版的通配符",
|
||
"Allows you to modify or replace your img2img mask with arbitrary files.": "允许您修改图生图蒙版或将其替换为任意文件。",
|
||
"allows you to reproduce images that feature shortcodes with randomness, such as": "允许您复现用随机性短代码的图像，例如",
|
||
"Allows you to run different logic blocks with inner case statements that match the value of the given positional argument.": "允许你运行含有与给定位置参数值匹配的内部条件语句的各种逻辑代码块",
|
||
": Allow use of sub seeds to 'smoothly' change from one seed to the next. Only makes sense to use if you manually have some seeds set in the keyframes.": "允许使用子种子（sub seeds）来实现从一个种子到下一个种子的平滑过渡。只有在关键帧中手动设置了种子时才有用。",
|
||
"Also, for adaptive (DPM fast and DPM adaptive) and compvis samples (DDIM and PMLS), the final image is slightly different than what was stored from last model call. Now the proper image is processed as extra step for those samplers (Revert disables this too) and used in averaging.": "此外，对于adaptive样本（如DPM fast和DPM adaptive）以及compvis样本（如DDIM和PMLS），最终生成的图像与上一次模型调用时保存的图像会略有差异。现在，这些采样器会有额外步骤处理以得到正确的图像（撤销操作也会禁用此功能），并用于平均。",
|
||
"Also, many samples create subtle differences on image in the end at large step count generation, but don't actually increase its quality: each iteration is slightly corrupted in finer details.": "此外，虽然在大步数生图时，许多样本的图像会有细微的差异，但这实际上并不会提高图像质量：每次迭代都会略微损坏一些更为精细的细节",
|
||
"Also note: if a shortcode is undefined, Unprompted will print it as a literal as if you had escaped it.": "另外请注意：如果一个短代码未定义，Unprompted会将其直接以原样文字显示，就好像进行了转义处理一样",
|
||
"Also, please set the booru selection here before using select or search.": "另外，在选择或搜索之前，请在这里设置你要用哪个 booru",
|
||
"Also Stop might help you to make draft generations without highres-fix if you set your total steps high, but use Anti Burn to stop early; this way your result will be more stable (comparing to full-step version) than if you had asked for less steps without stopping.": "此外，停止功能有助于生成没高清修复的草图，只要您设置了较高的总步数，并使用Anti Burn来提前停止。这样的结果（与完整步骤相比）会比没有停止的少步数更稳定。",
|
||
"and so the shortcode must have a way to differentiate between the two types.": "因此，这个短代码必须要有区分这两种类型的方法。",
|
||
"`animation_mode: None` batches on list of *prompts*. (Batch mode disabled atm, only animation_prompts are working)": "`animation_mode: None` *提示词*列表中的批次。 （批处理模式暂时禁用，只有 animation_prompts 有效）",
|
||
"Animation settings": "动画设定",
|
||
"An integer that correponds to your progress in a batch run. For example, if your batch count is set to 5, then": "一个与批处理运行进度相对应的整数。例如，如果你的批处理次数为5，那么",
|
||
"An object detection and auto-mask extension for Stable Diffusion web UI.": "一个物件检测与自适应蒙版扩展",
|
||
"Apply Lora to outputs rather than inputs when possible (experimental)": "尽可能将低秩微调模型 (LoRA) 应用于输出而非输入 (实验性选项)",
|
||
"argument allows you to return the content if one of many variables return true. This is the equivalent of running \"or\" instead of \"and\" in programming, e.g.": "参数允许您在多个变量中的一个返回true时返回内容。这相当于在编程中运行 \"or\" 而不是 \"and\", 例如: ",
|
||
"argument allows you to test for false instead of true, e.g.": "参数允许您测试false而不是true, 例如: ",
|
||
"argument which increases the radius of the instance masks by a given number of pixels.": "将实例蒙版的半径增加给定数量的像素的参数。",
|
||
"argument which increases the radius of your selection by a given number of pixels.": "将选择的半径增加给定数量的像素的参数。",
|
||
"Artist Tags": "画师标签 (Tags)",
|
||
"as it allows to run the inpainting for each found instance individually. This is useful, when using high resolution inpainting. This shortcode only works in the img2img tab of the A1111 WebUI.": "因为这能让每个被识别对象都能单独重绘。特别在高分辨率重绘时非常有用。此短代码仅在 A1111 WebUI 的图生图中有效。",
|
||
"ATTENTION! Largest model (dpt_beit_large_512) weighs 1.5 GB, it will take A WHILE to download.": "请注意！最大的模型（dpt_beit_large_512）大小为 1.5 GB，下载需要一段时间！",
|
||
"At the moment, you still have to select an image in the WebUI before pressing Generate, or this shortcode will throw an error. You can select any image - it doesn't matter what it is, just as long as the field isn't empty.": "现在，在点击生成按钮之前，您仍需在 WebUI 中选择一张图片，否则代码会报错。您可以选择任何一张图片——是什么不重要，只要不是空就行。",
|
||
"Auto-Adjust (WIP)": "自动调整 (施工中)",
|
||
"Automatically adjusts the width and height parameters in img2img mode based on the proportions of the input image.": "在图生图中，根据输入图像比例自动调节长度高度。",
|
||
"(B10) Secondary": "(B10) 第二",
|
||
"(B1) Secondary": "(B1) 第二",
|
||
"(B2) Secondary": "(B2) 第二",
|
||
"(B3) Secondary": "(B3) 第二",
|
||
"(B4) Secondary": "(B4) 第二",
|
||
"(B5) Secondary": "(B5) 第二",
|
||
"(B6) Secondary": "(B6) 第二",
|
||
"(B7) Secondary": "(B7) 第二",
|
||
"(B8) Secondary": "(B8) 第二",
|
||
"(B9) Secondary": "(B9) 第二",
|
||
"Batch settings": "批次设定",
|
||
"Be aware that this technique is essentially a training routine and will significantly lengthen your inference time, at least on the default settings. On a Geforce 3090, it appears to take around 1-2 minutes.": "请注意此技术实际上是一个训练程序，会显著延长生图时间，至少在默认设置下是这样的。在3090显卡上，可能需要大约1-2分钟。",
|
||
"Be careful when using xformers: sometimes your GPU will create different images in a row, even with very same settings! So you won't be able to correctly replicate an image of some previous step, which might mislead you when you start comparing things.": "使用 xformers 时要注意：有时即使使用完全相同的设置，你的 GPU 也会连续生成不同的图像！这会导致无法正确复刻之前某个步骤的图像，可能会误导你的比较。",
|
||
"Before LORA/LyCO": "LoRA/LyCO 前",
|
||
"Blocks": "所启用的区块",
|
||
"Bulk process frames with chosen outfill method": "使用选定的填充方法批量处理截取的帧",
|
||
"Bump seed (If > 0 do a Compare Paths but only one image. No video)": "自动递增种子 (大于 0 的时候会对比变迁轨迹，但不会生成视频而是只是一张图)",
|
||
"by AUTOMATIC1111": null,
|
||
"Calculate training parameters for a human subject. Enables prior preservation.": "计算训练人物主体所需参数。将启用先验存留 (prior preservation)",
|
||
"Calculate training parameters for a non-human subject. Disables prior preservation.": "计算训练非人物主体所需参数。将禁用先验存留(prior preservation)",
|
||
"Canny high threshold": "强边缘判断阈值（Canny high threshold）",
|
||
"Canny low threshold": "弱边缘判断阈值（Canny low threshold）",
|
||
"CFG Scale Combination": "提示词引导系数 (CFG Scale)",
|
||
"* change 'type' to clear/reload dropdowns.": "改变坐标轴类型可清空、刷新选项",
|
||
"Character Tags": "角色标签(Tags)",
|
||
"Check progress (first)": "(首次)查看进度",
|
||
"Classification dataset directory (optional).": "分类(Classification)数据集目录（可选）",
|
||
"Class Token + Description": "类的词元(Token) + 描述",
|
||
"Class token(s) to swap, can be comma-separated": "要互换的类的词元(Token)，可以是以英文逗号分割的",
|
||
"Clear inputs": "清除输入",
|
||
"Clip and renormalize DepthMap": "剪切重构深度图",
|
||
"CLIP: maximum number of lines in text file (0 = No limit)": "CLIP：文本文件中的最大行数（0 为无限制）",
|
||
"Codeformer": "CodeFormer 更激进",
|
||
"Coherence:": "一致性: ",
|
||
"Color:": "色调",
|
||
"Comb": "梳理",
|
||
"command": "命令",
|
||
"Comma separated list": "以逗号分割的列表",
|
||
"Comma separated list. Specify ckpt OR ckpt:word": "以逗号分割的列表。用以指定 ckpt 或 ckpt:字词",
|
||
"completed.": "步骤完成。",
|
||
"Concepts List (Overrides instance/class settings below)": "概念列表（将取代下面实例/类这两项设置）",
|
||
"Contour": "轮廓",
|
||
"Contrasts cut level": "对比度切分水平",
|
||
"[ControlNet] Guidance Strength": "[ControlNet] 引导强度",
|
||
"Converts all images in a folder to audio": "转换所选的图像目录内的图片为音频",
|
||
"Copy Metdata": "复制元数据",
|
||
"Copyright Tags": "版权标签 (Tags)",
|
||
"Copy to directory": "将图片复制到目标路径",
|
||
"Copy to Inpaint Upload & img2img ControlNet Inpainting": "复制到局部重绘和图生图的 ControlNet 局部重绘",
|
||
"Count of final steps to average together:": "用于平均的最终步数量：",
|
||
"Create aesthetic images embedding": "创建美术风格图集 Embedding",
|
||
"Create a grid where images will have different parameters. Use inputs below to specify which parameters will be shared by columns and rows": "创建一个网格，图像将有不同的参数。使用下面的输入来指定哪些参数将由列和行共享",
|
||
"Create an embedding from one or few pictures and use it to apply their style to generated images.": "用一张或多张图像创建一个 Embedding，并用它将图集的风格转移到要生成的图像上",
|
||
"Create the danged model already.": "创建一个本就很牛的模型",
|
||
"Crop_high": "裁剪高度",
|
||
"Current Booru": "当前的 Booru",
|
||
"Custom color for invalid additional networks": "自定义无效附加网络的颜色",
|
||
"Custom color of 0 weight": "权重为 0 时的自定义颜色",
|
||
"Custom color of disabled dropdown": "已禁用的下拉框的自定义颜色",
|
||
"Custom color of disabled scripts": "已禁用脚本的自定义颜色",
|
||
"Custom color of enabled dropdown": "已启用的下拉框的自定义颜色",
|
||
"Custom color of enabled scripts": "已启用脚本的自定义颜色",
|
||
"custom fold": "自定义文件夹",
|
||
"Date to": "日期至",
|
||
"Ddetailer Negative prompt": "检测反向提示词",
|
||
"Ddetailer Prompt": "检测正向提示词",
|
||
"Deforum-webui (use tab extension instead!)": "Deforum-webui (请使用选项卡上的扩展版本)",
|
||
"Denoise change:": "降噪变化：",
|
||
"Denoise Change:": "降噪变化：",
|
||
"Denoising strength change factor": "重绘幅度的调整系数",
|
||
"----deprecated----": "----以下内容在webUI新版本已移除----",
|
||
"Depth aware img2img mask": "深度感知图生图蒙版",
|
||
"Detail, Blur, Smooth, Contour:": "细节，模糊，柔度，轮廓：",
|
||
"Detection confidence threshold % (A)": "检测置信阈值 % (A)",
|
||
"Detection confidence threshold % (B)": "检测置信阈值 % (B)",
|
||
"different": "差异",
|
||
"Dilation factor (A)": "扩张(Dilation)因子 (A)",
|
||
"Directory containing your image files": "你需要处理的图片目录",
|
||
"Directory for batch input images": "批量导入图像的文件目录",
|
||
"Disabled for batch input images": "批量导入图像时禁用",
|
||
"Disabled when launched with --hide-ui-dir-config.": "启动 --hide-ui-dir-config 时禁用",
|
||
"Disable image generation. Useful if you only want to generate text prompts.": "禁用图像生成。如果你只想生成文本提示词的话",
|
||
"Disable negative prompt": "禁用反向提示词",
|
||
"Dismiss": "屏蔽",
|
||
"Don't checkpoint the gradients, Duh. Set to False to slightly increase speed at the cost of a bit of VRAM.": "保存权重进度时不要保存梯度，啊不废话。设置为 False 以消耗一点显存(VRAM)为代价略微提高速度",
|
||
"Draw a mask over an image, and the script will regenerate the masked area with content according to prompt": "在图像上画一个蒙版，脚本会根据提示重新生成蒙版区域的内容",
|
||
"Dropout tags when create texts": "创建文本时随机丢弃一些标签",
|
||
"Each key": "显示所有键值",
|
||
"Elliptic Limbs": "椭圆四肢",
|
||
"Embedding token": "Embedding 的词元(Token) / 关键词",
|
||
"Embedding to Shareable PNG": "将 Embedding 转换为可分享的 PNG 图片文件",
|
||
"Enable Checker": "启用项检测",
|
||
"Enable dropdown check": "启用下拉框检测",
|
||
"Enable Dynamic Lora Weights": "启用 Dynamic Lora Weights",
|
||
"Enable extra network check": "启用扩展模型检查",
|
||
"enables all 3D motion parameters.": "启用所有 3D 运动参数",
|
||
"Enable scribble mode if your image has white background.": "使用白色背景图片时请启用涂鸦模式",
|
||
"Enable weight check": "启用权重检查",
|
||
"Enter name of token/embedding or token ID as #nnnnn": "输入词元 (token) / 嵌入式模型 (embedding) 的名称或词元 ID 为 #nnnnn",
|
||
"Envelope (Outer Fit)": "信封模式 (贴合外边)",
|
||
"escape (\\) brackets in deepbooru (so they are used as literal brackets and not for emphasis)": "在 deepbooru 中使用转义 (\\) 括号（使其用作括号字符而不是强调符）",
|
||
"ETA Noise Seed Delta": "Eta 噪声种子偏移量 (ENSD)",
|
||
"Euler Ancestral - very creative, each can get a completely different picture depending on step count, setting steps to higher than 30-40 does not help": "Euler Ancestral - 非常有创意，可以根据迭代步数获得完全不同的图像，将迭代步数设置为高于 30-40 不会有正面作用",
|
||
"Eval Preset": "Eval 预设",
|
||
"exampls: Change base alpha from 0.1 to 0.9": "例：从 0.1 至 0.9 改变基层 α",
|
||
"Existing Prompt Contents": "现存的提示词内容",
|
||
"explicit": "色情/露骨内容（Explicit）",
|
||
"Explore Model": "试用模型",
|
||
"extension by": null,
|
||
"extension by bbc_mc": null,
|
||
"Extra file in alias only format": "附加词库文件使用仅别称格式",
|
||
"Extra filename (do not use e621.csv here!)": "附加词库文件（不要使用e621.csv）",
|
||
"Extra Network": "扩展模型",
|
||
"Extra path to scan for LoRA models (e.g. training output directory)": "检索低秩微调模型 (LoRA) 的附加目录",
|
||
"extras history": "更多选项卡的历史记录",
|
||
"file not found: None": "未检索到模型",
|
||
"File with inputs": "含输入内容的文件",
|
||
"filter out those tags from deepbooru output (separated by comma)": "从 Deepbooru 输出中过滤掉这些标签(用逗号分隔)",
|
||
"Fix CFG": "固定引导系数(CFG)",
|
||
"Fixed Roll": "固定旋转",
|
||
"Fix Seed": "固定变异种子(Seed)",
|
||
"Flatfile": "纯文字文件",
|
||
"For": "用于",
|
||
"Force CLIP position_id to int64 before convert": "在转换前强制将 CLIP position_id 转换为 int64",
|
||
"frappe": "frappe/冰沙（深色-亮）",
|
||
"general": "大众级/普通内容（General）",
|
||
"Generate all possible prompts up to a maximum of Batch count * Batch size)": "生成不超过（总批次数 * 每批数量）的所有可能的提示词",
|
||
"Generate a preview image every N steps, 0 to disable": "每隔 N 步生成一次预览图，设置为 0 以禁用",
|
||
"Generate bounding box": "创建箱体框",
|
||
"Generate Skeleton/Depth/Normal/Canny Map": "生成骨架/深度(Depth)/法线(Normal)/硬边缘描线(Canny)图",
|
||
"Get comma-separated list of models (for XY Grid)": "生成逗号分隔的模型列表(方便X/Y表使用)",
|
||
"Grad Accumulation Steps": "梯度累加步数 (Grad Accumulation Steps)",
|
||
"Guess what - this will be incredibly slow, but it will work for < 8GB GPUs.": "你猜怎么着 - 这将非常地慢我的老伙计，但它适用于 < 8GB 显存(VRAM)的 GPU",
|
||
"Guidance strength (T)": "引导强度（迭代参与%，Guidance strength）",
|
||
"Half": "半精度",
|
||
"HED Resolution": "HED 分辨率（HED Resolution）",
|
||
"Hide hidden": "隐藏标记为隐藏的图片",
|
||
"Hough distance threshold (MLSD)": "霍夫距离阈值（Hough distance threshold）（MLSD）",
|
||
"Hough Resolution": "霍夫分辨率（Hough Resolution）",
|
||
"Hough value threshold (MLSD)": "霍夫值阈值（Hough value threshold）（MLSD）",
|
||
"How many image to create in a single batch": "每批创建多少图像",
|
||
"How many times to repeat processing an image and using it as input for the next iteration": "重复处理图像并用作下次迭代输入的次数",
|
||
"How Many To Generate": "生成数量",
|
||
"\"Hug the middle\" during interpolation": "在插值的途中 \"主动去找中间点\"",
|
||
"Hypernet str.": "超网络 (Hypernetwork) 强度",
|
||
"Hypernetworks List": "可选的超网络列表",
|
||
"Hypernetwork strength": "超网络 (Hypernetwork) 强度",
|
||
"Hypernetwork strengths": "超网络强度",
|
||
"If PNG image is larger than 4MB or any dimension is larger than 4000, downscale and save copy as JPG": "如果 PNG 图像大于 4MB 或宽高之一大于 4000，则缩小并保存副本为 JPG 图片",
|
||
"If the groups wont drop down click": "如果无法下拉组，点击",
|
||
"If this option is enabled, watermark will not be added to created images. Warning: if you do not add watermark, you may be behaving in an unethical manner.": "如果启用此选项，水印将不会添加到生成出来的图像中。警告：如果你不添加水印，你的行为可能是不符合专业操守的",
|
||
"If you want to display the original model as well for comparison": "如果你同时想显示原本模型以做对比",
|
||
"Ignore the negative prompt. Magic Prompt and I'm feeling lucky generate negative prompts by default, check this to disable that functionality.": "忽略反向提示词\n魔法提示词和手气不错默认生成反向提示词，勾选此选项以禁用这种功能",
|
||
"Image CFG": "图像引导系数(CFG)",
|
||
"Images Browser": "图库浏览器",
|
||
"Image Tags": "图像标签 (Tags)",
|
||
"Image with MD5 Hash": "以 MD5 哈希值命名的图片文件",
|
||
"Include artist tags in tag string": "在标签字串中包含画师标签",
|
||
"Include character tags in tag string": "在标签字串中包含角色标签",
|
||
"Include copyright tags in tag string": "在标签字串中包含版权标签",
|
||
"Include meta tags in tag string": "在标签字串中包含属性标签",
|
||
"Include Separate Images": "生成图表时，保留每一张图像",
|
||
"Include sub images": "包含子图像",
|
||
"Increase coherency by padding from the last comma within n tokens when using more than 75 tokens": "当使用超过 75 个词元(tokens)时，通过从 n 个词元中的最后一个逗号留空来提高一致性",
|
||
"In loopback mode, on each loop the denoising strength is multiplied by this value. <1 means decreasing variety so your sequence will converge on a fixed picture. >1 means increasing variety so your sequence will become more and more chaotic.": "在回送模式下，在每个循环中，重绘幅度都会乘以该值。<1 表示减少多样性，因此你的这一组图将集中在固定的图像上。>1 意味着增加多样性，因此你的这一组图将变得越来越混乱",
|
||
"Inpaint at full resolution": "全分辨率局部重绘",
|
||
"Inpaint at full resolution padding, pixels": "预留像素",
|
||
"Inpaint model B detections before model A runs": "在模型 A 运行之前，先局部重绘模型 B 的检测",
|
||
"Insert selected styles into prompt fields": "在提示词中插入选定的模版风格",
|
||
"Instance Token + Class Token + Description": "实例的词元 + 类的词元 + 描述",
|
||
"Instance Token + Description": "实例的词元(Token) + 描述",
|
||
"Instance token to swap": "要互换的实例的词元(Token)",
|
||
"Interrogate: deepbooru score threshold": "反推：deepbooru 分数阈值",
|
||
"Interrogate: deepbooru sort alphabetically": "反推：deepbooru 按字母顺序排序",
|
||
"Interrogate: include ranks of model tags matches in results (Has no effect on caption-based interrogators).": "反推：在生成结果中包含与模型标签 (tags) 相匹配的等级（对基于生成自然语言描述的反推没有影响）",
|
||
"Interrogate: maximum description length": "反推：最大描述长度",
|
||
"Interrogate: minimum description length (excluding artists, etc..)": "反推：最小描述长度（不包括艺术家等）",
|
||
"Interrogate: use artists from artists.csv": "反推：使用 artists.csv 中的艺术家",
|
||
"I recommend creating an image with txt2img and then sending the result to img2img with the prompt and settings. For this script I use these settings..": "建议使用文生图生成图像并连同参数及提示词发送到图生图使用。对于此脚本作者推荐以下参数：",
|
||
"It will delete any matches to the generated result (case insensitive).": "它将删除生成结果中的的任何匹配项（不区分大小写）",
|
||
"I've finished my sketch": "完成绘制",
|
||
"Join the official Deforum Discord discord.gg/deforum to share your creations and suggestions": "加入官方 Deforum 的 Discord discord.gg/deforum 分享您的创作和建议",
|
||
"Keep 3D models in VRAM between runs": "运行时，将3D模型保留在显存中",
|
||
"Keep empty if dont use.": "不使用请留空",
|
||
"keyword": "搜索",
|
||
"latte": "latte/拿铁（浅色）",
|
||
"Leave blank to use instance prompt.": "留空以使用实例提示词",
|
||
"LeReS Resolution": "LeReS 分辨率（LeReS Resolution）",
|
||
"Lets you edit captions in training datasets.": "让你可以在这里编辑训练数据集的描述文本",
|
||
"License: MIT": "许可: MIT",
|
||
"Link to image page": "链接到图片页面",
|
||
"List-Up checkpoints": "列出模型",
|
||
"Load model paramters from the last training session.": "从上次训练中加载模型参数",
|
||
"Loss for cond match (grad mode)": "匹配文字调节(cond)损失 (梯度模式)",
|
||
"Loss for latent match (grad mode)": "匹配潜空间(latent)损失 (梯度模式)",
|
||
"(M10) Multiplier": "(M10) 倍率",
|
||
"(M1) Multiplier": "(M1) 倍率",
|
||
"(M2) Multiplier": "(M2) 倍率",
|
||
"(M3) Multiplier": "(M3) 倍率",
|
||
"(M4) Multiplier": "(M4) 倍率",
|
||
"(M5) Multiplier": "(M5) 倍率",
|
||
"(M6) Multiplier": "(M6) 倍率",
|
||
"(M7) Multiplier": "(M7) 倍率",
|
||
"(M8) Multiplier": "(M8) 倍率",
|
||
"(M9) Multiplier": "(M9) 倍率",
|
||
"macchiato": "macchiato/玛奇朵（深色）",
|
||
"mask created": "蒙版创建完成。",
|
||
"Masking mode": "蒙版模式",
|
||
"Math keyframing explanation docs.google.com/document/d/1pfW1PwbDIuW0cv-dnuyYj1UzPqe23BlSLTJsqazffXM/edit?usp=sharing": "数学关键帧(Math keyframing)解释 docs.google.com/document/d/1pfW1PwbDIuW0cv-dnuyYj1UzPqe23BlSLTJsqazffXM/edit?usp=sharing",
|
||
"Max Caption length (0=unlimited)": "最大描述长度 (0 为无限制)",
|
||
"Max Gradient norms.": "最大梯度范数(Max Gradient norms)",
|
||
"Max Grad Norms": "最大梯度范数(Max Grad Norms)",
|
||
"maximum aesthetic_score": "按美学评分上限过滤",
|
||
"Max Token Length (Requires Pad Tokens for > 75)": "最大词元(Token)长度 (词元(Token) > 75 时会进行留空)",
|
||
"Meta Tags": "属性标签 (Tags)",
|
||
"midas": "MiDaS 深度信息估算（MiDaS depth estimation）",
|
||
"Midas Resolution": "MiDaS 分辨率（MiDaS Resolution）",
|
||
"mocha": "mocha/摩卡（深色-暗）",
|
||
"Model directory": "模型目录",
|
||
"Model Keyword": "Model Keyword (模型关键词)",
|
||
"Model list will be output here": "模型列表将会在此处输出",
|
||
"Motion parameters:": "运动参数：",
|
||
"Mouse over the labels to access tooltips that provide explanations for the parameters.": "将鼠标悬停在标签上可提供参数的说明提示",
|
||
"native textarea": " 原生文本区域",
|
||
"Negative": "反向提示词",
|
||
"Network module (used throughout this tab)": "附加网络类型(仅此页面使用)",
|
||
"Normal background threshold": "背景识别阈值（Normal background threshold）",
|
||
"Normal Resolution": "法线贴图分辨率（Normal Resolution）",
|
||
"NOTE: If the 'Generate' button doesn't work, go in Settings and click 'Restart Gradio and Refresh...'.": "注意：如果“生成”按钮不起作用，请进入“设置”并单击“重启 Gradio 及刷新...”。",
|
||
"----not work----": "----以下是 结束标志----",
|
||
"Number of grids in each row": "每行显示多少格",
|
||
"number of images to delete consecutively next": "接下来要连续删除的图像数",
|
||
"Number of pictures displayed on each page": "每页显示的图像数量",
|
||
"Number of sampling steps to use when generating preview images.": "生成预览图像时要使用的采样迭代步数",
|
||
"Number of steps for the warmup in the lr scheduler.": "学习率调度器中的预热步数",
|
||
"only for training": "仅用于训练",
|
||
"Only hidden": "仅显示隐藏图片",
|
||
"Open drawing canvas!": "创建绘图画布（使用手绘草稿而非上传的图片）",
|
||
"Optional, uses selected model's directory if blank": "可选，若留空则使用默认目录",
|
||
"Original Deforum Github repo github.com/deforum/stable-diffusion": "原始 Deforum Github 仓库 github.com/deforum/stable-diffusion",
|
||
"Output Batches": "输出批次数",
|
||
"Output directory for mask previews": "蒙版预览的输出目录",
|
||
"Output directory for masks": "蒙版输出目录",
|
||
"output images will be placed in a folder with this name, inside of the img2img output folder": "输出图像将会保存在指定名字的文件夹内，用于取代原有的图生图输出文件夹",
|
||
"Override inpaint to original": "覆写局部重绘中的原图",
|
||
"Override mask blur to 0": "蒙版模糊数值覆写为 0",
|
||
"Pad the input images token lenght to this amount. You probably want to do this.": "将输入图像的词元长度垫齐到此数量。你可能会想要这样做",
|
||
"Page Number": "页数",
|
||
"Parse Recipe": "剖析配方",
|
||
"Parse Result": "剖析结果",
|
||
"Path to directory with classification images": "分类图像的目录路径",
|
||
"/path/to/images/* or /path/to/images/**/*": "/path/to/images/* 或 /path/to/images/**/*",
|
||
"Path to JSON file with concepts to train, or a JSON string.": "包含要训练的概念的 JSON 文件的路径，或 JSON 字符串",
|
||
"Pick every n-th frame": "每 n 帧挑选 1 帧",
|
||
"Pick frames every n-th": "每 n 帧挑选 1 帧",
|
||
"Positive": "正向提示词",
|
||
"Prespective flip — Low VRAM pseudo-3D mode:": "透视翻转 — 低显存(VRAM)伪3D模式:",
|
||
"Press enter to add new tag": "按下 Enter 键添加新提示词",
|
||
"Press enter to add tag": "输入回车添加新标签",
|
||
"Previous Page": "前一页",
|
||
"Primary detection model (A)": "首要检测模型 (A)",
|
||
"Process an image, use it as an input, repeat.": "处理一张图像，将其作为输入，并重复",
|
||
"project_dir not found": "工程目录未找到",
|
||
"Promot Textarea": "提示词文本区",
|
||
"Provide Simplified Chinese localization for the WebUI": "提供简体中文本地化翻译",
|
||
"questionable": "强烈性暗示/可疑内容（Questionable）",
|
||
"Randomize CFG": "随机引导系数(CFG)",
|
||
"Randomize CFG Scale": "随机化 提示词引导系数(CFG Scale)",
|
||
"Randomize CLIP skip": "随机化 CLIP 终止层数",
|
||
"Randomize Height": "随机化 高度",
|
||
"Randomize Highres. Denoising Strength": "随机化 高分辨率修复的重绘幅度(Denoising)",
|
||
"Randomize Highres. Height": "随机化 高分辨率修复的第一遍的高度",
|
||
"Randomize Highres. percentage": "随机化 启用高分辨率修复的几率",
|
||
"Randomize Highres. Width": "随机化 高分辨率修复的第一遍的宽度",
|
||
"Randomize Seed": "随机变异种子(Seed)",
|
||
"Randomize Steps": "随机化 采样迭代步数",
|
||
"Randomize Width": "随机化 宽度",
|
||
"Rebuild Index": "重建页面",
|
||
"Recommended settings: Use from inpaint tab, inpaint at full res ON, denoise <0.5": "推荐设置：于局部重绘选项卡使用，开启全分辨率局部重绘，重绘幅度(Denoising) < 0.5",
|
||
"Record accessable images directories": "记忆可访问的图像目录",
|
||
"Remove Background %": "背景排除（%）",
|
||
"Remove Near %": "近景排除（%）",
|
||
"Remove results with the \"animated\" tag": "删除带有 \"animated\" (动图)标签的结果",
|
||
"Repetition Penalty": "重复惩罚",
|
||
"Replace order (replace mode)": "取代顺序 (取代模式)",
|
||
"Replace spaces with a comma and a space": "用逗号', '替换空格",
|
||
"Replace underscores with spaces": "用空格替换下划线'_'",
|
||
"Re-run your combinatorial batch this many times with a different seed each time.\nThe maximum number of outputs = Combinatorial batches * Batch size * Batch count.\nTo specify the maximum number of prompt combinations use 'Batch count'/'Batch size' options.": "重复做多批次组合生成，每次用不同的随机种子\n最大输出数为 组合批次 * 批量（Batch size） * 批次（Batch count）\n在 “批次” 和 “批量” 处指定提示词组合的最大数量",
|
||
"Reset recipe text area": "重置配方文本区域",
|
||
"Reset vars": "重置变量(vars)",
|
||
"Resize mode -": "缩放模式",
|
||
"Restart Gradio and Refresh components (Custom Scripts, ui.py, js and css only)": "重启 Gradio 并刷新组件（仅限自定义脚本、ui.py、js 和 css）",
|
||
"Restore Checkpoint after process": "完成后恢复开始前选择的模型(ckpt)",
|
||
"Restore VAE": "还原 VAE",
|
||
"Roll three": "抽三位出来",
|
||
"Run Python code. Advanced user only. Must run program with --allow-code for this to work": "运行 Python 代码。仅限老手使用。必须以 --allow-code 来开启程序，才能使其运行",
|
||
"Run settings": "运行设置",
|
||
"(S10) Inter-Method": "(S10) 插值方法",
|
||
"(S1) Inter-Method": "(S1) 插值方法",
|
||
"(S2) Inter-Method": "(S2) 插值方法",
|
||
"(S3) Inter-Method": "(S3) 插值方法",
|
||
"(S4) Inter-Method": "(S4) 插值方法",
|
||
"(S5) Inter-Method": "(S5) 插值方法",
|
||
"(S6) Inter-Method": "(S6) 插值方法",
|
||
"(S7) Inter-Method": "(S7) 插值方法",
|
||
"(S8) Inter-Method": "(S8) 插值方法",
|
||
"(S9) Inter-Method": "(S9) 插值方法",
|
||
"Sample extension. Allows you to use __name__ syntax in your prompt to get a random line from a file named name.txt in the wildcards directory. Also see Dynamic Prompts for similar functionality.": "扩展示例。允许你在提示词中使用 __name__ 语法时，会从 wildcards 目录中一个名为 name.txt 的文件中随机获取一行作为输入。动态提示词扩展也有类似功能",
|
||
"Sample guidance scale": "样本的指导尺度(guidance scale) - 类似基准 CFG scale 的概念",
|
||
"Sample Image Negative Prompt": "样本图像的反向提示词",
|
||
"Sampler:": "采样方法: ",
|
||
"Sampler options": "采样器选项",
|
||
"Sample steps": "样本迭代步数",
|
||
"Sampling method -": "采样方法（sampler）-",
|
||
"Sampling steps -": "迭代步数（step）-",
|
||
"Save a checkpoint every N steps. ": "每 N 步保存一次模型权重进度",
|
||
"Save a checkpoint every N steps, 0 to disable": "每隔 N 步保存一次模型权重进度(ckpt)，设置为 0 以禁用",
|
||
"Save alpha crop": "裁剪时保留透明度",
|
||
"save checkpoint after merge": "在整合后保存当前模型",
|
||
"Save Checkpoint Frequency": "保存模型权重进度(ckpt)的频率",
|
||
"Save Current Model": "保存当前模型",
|
||
"Save current prompts as a style. If you add the token {prompt} to the text, the style use that as placeholder for your prompt when you use the style in the future.": "将当前的提示词保存为模版风格。如果你在文本中添加{prompt}标记，那么将来你使用该模版风格时，你现有的提示词会替换模版风格中的{prompt}",
|
||
"Save for ALL presets": "保存为所有预设",
|
||
"Save masks": "保存蒙版",
|
||
"Save PNGinfo to grid": "将生成参数写入网格图（可用图片信息直接识别网格图）",
|
||
"Saves Optimizer state as separate *.optim file. Training can be resumed with HN itself and matching optim file.": "将优化器状态保存为单独的 *.optim 文件。可以使用超网络(HN)本身和匹配的 optim 文件继续中断了的训练。",
|
||
"Scale Learning Rate": "缩放学习率",
|
||
"Scale the learning rate by the number of GPUs, gradient accumulation steps, and batch size.": "通过 GPU 数量、梯度累加步数(gradient accumulation steps)和每批数量(batch size)来缩放学习率",
|
||
"Scale to Fit (Inner Fit)": "缩放到比例 (贴合内边)",
|
||
"Schedule to use for official training stuff.": "选择要用于训练官方东西的调度器",
|
||
"Scribble Mode": "涂鸦模式",
|
||
"Scribble Mode (Invert colors)": "涂鸦模式（反色，强制预处理器重新识别）",
|
||
"Scribble Mode (Reverse color)": "涂鸦模式 (反色)",
|
||
"sd-extension-aesthetic-scorer": "美学评分插件",
|
||
"sdweb-merge-board": "合并面板",
|
||
"sd-webui-gelbooru-prompt": "Gelbooru 标签自动摘录插件",
|
||
"sd-webui-multiple-hypernetworks": "复数超网络加载",
|
||
"sdweb-xyplus": "X/Y图表 Plus 插件",
|
||
"Search Booru": "搜 Booru",
|
||
"Search Results": "搜寻结果",
|
||
"Search string": "搜字串",
|
||
"Secondary detection model (B) (optional)": "次要检测模型 (B) (可选)",
|
||
"Seed:": "种子: ",
|
||
"Seed Combination": "种子数（Seed）",
|
||
"Seeds": "随机种子",
|
||
"Select activation function of hypernetwork": "选择超网络的激活函数",
|
||
"Select Image": "选择图像",
|
||
"Select Layer weights initialization. relu-like - Kaiming, sigmoid-like - Xavier is recommended": "选择初始化层权重的方案，类relu - Kaiming，类sigmoid - Xavier 都是比较推荐的选项",
|
||
"Send to img2img inpaint": "发送到图生图重绘",
|
||
"Send to Recipe": "发送到 配方",
|
||
"sensitive": "轻微性暗示/敏感内容（Sensitive）",
|
||
"Separate a list of words with commas, and the first word will be used as a keyword: script will search for this word in the prompt, and replace it with others": "以逗号分割的单词列表，第一个单词将被用作关键词：脚本将在提示词中搜索这个单词，并用其他单词替换它",
|
||
"Separate a list of words with commas, and the script will make a variation of prompt with those words for their every possible order": "以逗号分割的单词列表，脚本会排列出这些单词的所有排列方式，并加入提示词各生成一次",
|
||
"Set the maximum number of words to be used in the [prompt_words] option; ATTENTION: If the words are too long, they may exceed the maximum length of the file path that the system can handle": "设置在[prompt_words]选项中要使用的最大字数；注意：如果字数太长，可能会超过系统可处理的文件路径的最大长度",
|
||
"Set the value of seed to -1 when Generate forever buttons are clicked": "当点击 \"无限生成\" 按钮时，设置随机数种子的值为-1",
|
||
"Set this or number of steps to train for, not both.": "设置这个或者'训练迭代步数'，两者不能同时用",
|
||
"Set this to 2 to increase speed?": "将此设置为 2 以提高速度？",
|
||
"Sharpness, Brightness, Color, Contrast:": "锐利度，明亮度，色调，对比度",
|
||
"Show": "显示",
|
||
"Show Ad": "显示广告",
|
||
"Show image creation progress every N sampling steps. Set 0 to disable.": "在每 N 个采样迭代步数显示图像生成进度。设置 0 禁用",
|
||
"Show image creation progress every N sampling steps. Set to 0 to disable. Set to -1 to show after completion of batch.": "每 N 个采样迭代步数显示图像生成进度。设置 0 禁用，设置 -1 使预览在批量生成完成之后再显示",
|
||
"Show new live preview image every N sampling steps. Set to -1 to show after completion of batch.": "每N个采样步骤更新一次实时预览图像，设置为-1以在每批次完成后显示，设置为0关闭实时预览 (建议设为0，开启会占用大量显存和显卡算力)",
|
||
"Show only favorite Axis Option": "仅显示常用坐标轴类型",
|
||
"Show Textbox": "显示文本框",
|
||
"similar": "相似",
|
||
"Simplified Chinese localization": "简体中文本地化",
|
||
"Size:": "大小: ",
|
||
"Skip frame extraction": "跳过部分帧提取",
|
||
"Skip steps": "跳过步骤数",
|
||
"Sort models by": "排序方式",
|
||
"Source embedding to convert": "用于转换的源 Embedding",
|
||
"stable-diffusion-webui-auto-tls-https": "自动 tls-https",
|
||
"Start from Axis": "优先遍历的坐标轴",
|
||
"Start of the prompt": "起始提示词",
|
||
"Step count": "步数",
|
||
"Step count (grad mode)": "步数 (梯度模式)",
|
||
"Step method": "步进方法",
|
||
"Step method (grad mode)": "步进方法 (梯度模式)",
|
||
"Steps:": "步数: ",
|
||
"Steps animation": "预览动画化 (Steps animation)",
|
||
"Steps between prompts": "每个提示词之间的迭代步伐",
|
||
"Step size": "步幅 (梯度模式)",
|
||
"Step size (grad mode)": "步幅 (梯度模式)",
|
||
"Stop At last layers of CLIP model": "在 CLIP 模型的最后哪一层停下 (Clip skip)",
|
||
"Store all steps of inference also (slow!)": "同时保存推理中的所有步 （慢！）",
|
||
"Strategy is to sample from a shortlist of the top K tokens. This approach allows the other high-scoring tokens a chance of being picked.": "原理是从前K个token的列表中进行采样，这种方法使得其他高分token有机会被选中",
|
||
"Style to apply; styles have components for both positive and negative prompts and apply to both": "要使用的模版风格； 模版风格包含正向和反向提示词，并应用于两者\n🎨 随机添加一个艺术家到提示词中\n ↙️ 从提示词中读取生成参数，如果提示词为空，则读取上一次的生成参数到用户界面\n💾 将当前的提示词保存为模版风格(保存在styles.csv)\n📋 将所选模板风格，应用于当前提示词\n如果你在文本中添加{prompt}标记，并保存为模版风格\n那么将来你使用该模版风格时，你现有的提示词会替换模版风格中的{prompt}",
|
||
"Subject Name to replace class with in cations": "描述文本中要替换类(class)的主体名(subject)",
|
||
"subseed": "差异随机种子",
|
||
"Switch negative prompt between Native language and English": "切换反向提示词显示语言 (母语/英语)",
|
||
"Text CFG": "文本引导系数(CFG)",
|
||
"The beta1 parameter for the Adam optimizer.": "Adam 优化器的 beta1 参数",
|
||
"The beta2 parameter for the Adam optimizer.": "Adam 优化器的 beta2 参数",
|
||
"The learning rate scheduler to use.": "要使用的学习率调度器",
|
||
"The maximum number of tokens for the output of the model": "模型输出的最大token数",
|
||
"The name of the model to create.": "要创建的模型的名称",
|
||
"The number of results to generate. Not guaranteed if models fails to create them": "生成的提示词批数，部分批次可能会生成失败",
|
||
"The number of times the script will inference your image and increase the resolution in increments. The amount the resolution is increased each loop is determined by this number and the maximum image width/height. The more loops, the more chances of your image picking up more detail, but also artifacts. 4 to 10 is what I find to work best, but you may like more or less.": "脚本将推断图像并逐步增加分辨率的次数。 每个循环增加的分辨率量由这个数字和最大图像宽度/高度决定。 循环次数越多，图像获得更多细节的机会就越大，但也会出现伪影。 4 到 10 为推荐数值，可按照需求调节。",
|
||
"The parameter for repetition penalty. 1.0 means no penalty. Default setting is 1.2. Paper explaining it is linked to Github's readme": "重复惩罚的参数。 1.0 表示没有处罚。 默认设置为 1.2。 它的说明参考 Github 的readme文件",
|
||
"The rate at which the model learns. Default is 0.000005. Use a lower value like 0.000002 or 0.000001 for more complex subjects...like people.": "模型的学习速率。默认为 0.000005。对于更复杂的主体......比如人物，使用较低的值，如 0.000002 或 0.000001",
|
||
"The resolution of input images. You probably want to pre-process them to match this.": "输入图像的分辨率。你可能希望对它们进行预处理以匹配它",
|
||
"These parameters are checkboxes that apply a PIL Image Filter to the final image.": "这些参数是将 PIL 图像过滤器应用于最终图像的复选框",
|
||
"These parameters are sliders that adjust the sharpness, brightness, color, and contrast of the image. 1 will result in no adjustments, less than one reduces these settings for the final image and greater than 1 increases these settings.": "这些参数调整图像的锐度、亮度、色调和对比度。 1 将不做调整，小于 1 会减少效果，大于 1 会增加效果。",
|
||
"These parameters set the maximum width and height of the final image. Always start with an image smaller than these dimensions. The smaller you start, the more impressive the results. I usually start at either 340x512 or 512x768": "这些参数设置最终图像的最大宽度和高度。初始图像应始终小于这些尺寸。初始图越小，结果变化越大。（作者）通常从 340x512 或 512x768 开始",
|
||
"The source checkpoint to extract for training.": "用于训练的要提取的源模型(ckpt)",
|
||
"This fork for auto1111's webui github.com/deforum-art/deforum-for-automatic1111-webui": "此克隆用于 auto1111 的 webui github.com/deforum-art/deforum-for-automatic1111-webui",
|
||
"This setting changes the amount of resolution increase per loop, keeping the changes from being linear. The higher the value the more significant the resolution changes toward the end of the looping.": "此设置会更改每次循环的分辨率增加量，以避免线性变化。值越高，分辨率在循环结束时的变化就越大。",
|
||
"This setting will increase or decrease the denoising strength every loop. A higher value will increase the denoising strength, while a lower value will decrease it. A setting of 1 keeps the denoising strength as it is set on the img2img settings.": "此设置将增加或减少每个循环的去噪强度。较高的值会增加去噪强度，较低的值会降低去噪强度。设置为 1 会沿用图生图设置中的去噪强度。",
|
||
"To enable seed schedule select seed behavior — 'schedule'": "要启用种子调度，请选择随机种子行为——“调度”",
|
||
"to fix the issue.": "修复",
|
||
"Torch active: Peak amount of VRAM used by Torch during generation, excluding cached data.\nTorch reserved: Peak amount of VRAM allocated by Torch, including all active and cached data.\nSys VRAM: Peak amount of VRAM allocation across all applications / total GPU VRAM (peak utilization%).": "Torch active： 在生成过程中，Torch使用的显存(VRAM)峰值，不包括缓存的数据。\nTorch reserved： Torch 分配的显存(VRAM)的峰值量，包括所有活动和缓存数据。\nSys VRAM： 所有应用程序分配的显存(VRAM)的峰值量 / GPU 的总显存(VRAM)（峰值利用率%）",
|
||
"to see which words are constructed using multiple sub-words, e.g. 'computer' doesn't exist in stable diffusion's CLIP dictionary and instead 'compu' and 'ter' are used (1 word but 2 Embedding vectors). Currently buggy and needs a moment to process before pressing the button. If it doesn't work after a moment, try adding a random space to refresh it.": "查看哪些词是使用多个子词构成的，例如 Stable Diffusion 的 CLIP 字典中不存在 'computer'，而是使用 'compu' 以及 'ter'（1 个单词但使用 2 个 Embedding 向量）。目前这个扩展还有点问题，在按下按钮之前需要一点时间来处理。如果过了一会还是不行，试试随便加个空格刷新一下",
|
||
"Total number of classification images to use. Set to 0 to disable.": "要使用的分类 (classification) 图像总数。设置为 0 以禁用",
|
||
"Total number of classification/regularization images to use. If no images exist, they will be generated. Set to 0 to disable prior preservation.": "要使用的分类/正则化图像总数。如果没有图像，就生成一些。设置为 0 以禁用先验存留(prior preservation)",
|
||
"Total Number of Class/Reg Images": "用于分类/规范化的图像总数",
|
||
"Total number of training steps to perform. If provided, overrides num_train_epochs.": "要执行的训练迭代步数总数。如果填了，则覆盖 '训练多少期(num_train_epochs)'",
|
||
"Total video length [s]": "视频总长度[秒]",
|
||
"Train an embedding; must specify a directory with a set of 1:1 ratio images": "训练 Embedding； 必须指定一组具有 1:1 比例图像的目录",
|
||
"Train base model": "训练底模",
|
||
"# Training Epochs": "训练多少期(Epochs)",
|
||
"Training Epochs": "训练多少期(Epochs)",
|
||
"Training steps": "训练迭代步数",
|
||
"Training Steps": "训练迭代步数",
|
||
"Train number of repetitions": "训练重复次数",
|
||
"Turn the depthmap into absolute black/white": "转换深度图为纯黑或纯白",
|
||
"Update instructions:": "更新指引：",
|
||
"Upscale latent space image when doing hires. fix": "做高分辨率修复时，也放大潜空间图像",
|
||
"Upscale masked region to target resolution, do inpainting, downscale back and paste into original image": "将蒙版区域（包括预留像素长度的缓冲区域）放大到目标分辨率，进行局部重绘。\n然后缩小并粘贴回原始图像中",
|
||
"Upscale Ratio": "放大比例",
|
||
"Uscale the image in latent space. Alternative is to produce the full image from latent representation, upscale that, and then move it back to latent space.": "放大潜空间中的图像。而另一种方法是，从潜变量表达中直接解码并生成完整的图像，接着放大它，然后再将其编码回潜空间",
|
||
"Use 8bit Adam": "使用 8bit Adam",
|
||
"Use batch input directory as image source": "使用文件目录批量导入图像源",
|
||
"Use blacklist?": "启用黑名单",
|
||
"Use following tags to define how filenames for images are chosen: [steps], [cfg], [prompt_hash], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [model_name], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; leave empty for default.": "使用以下标签选择如何定义图像的文件名: [steps], [cfg], [prompt_hash], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [model_name], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; 默认请留空.",
|
||
"Use following tags to define how filenames for images are chosen: [steps], [cfg], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; leave empty for default.": "使用以下标签选择如何定义图像的文件名： [steps], [cfg], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; 默认请留空",
|
||
"Use following tags to define how subdirectories for images and grids are chosen: [steps], [cfg], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; leave empty for default.": "使用以下标签定义如何选择图像和网格图的子目录： [steps], [cfg], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]。默认请留空",
|
||
"Useful for I'm feeling lucky and Magic Prompt. If this is set, then negative prompts are not generated.": "对手气不错和魔法提示词很有用。如果设置了此项，则不会生成否定提示",
|
||
"Use mid-layer control on highres pass (second pass)": "进行高清修复时使用中间层控制(mid-control)",
|
||
"Use negative embedding (DreamArtist)": "使用反向 Embedding (梦作家)",
|
||
"Use punctuation?": "使用标点符号",
|
||
"user": null,
|
||
"User guide for v0.5 docs.google.com/document/d/1pEobUknMFMkn8F5TMsv8qRzamXX_75BShMMXV8IFslI/edit": "v0.5 用户指南 docs.google.com/document/d/1pEobUknMFMkn8F5TMsv8qRzamXX_75BShMMXV8IFslI/edit",
|
||
"Uses a trained model file, produces WD 1.4 Tags. Model link - https://mega.nz/file/ptA2jSSB#G4INKHQG2x2pGAVQBn-yd_U5dMgevGF8YYM9CR_R1SY": "使用经过训练的模型文件，生成 Waifu Diffusion 1.4 标签。模型链接 - https://mega.nz/file/ptA2jSSB#G4INKHQG2x2pGAVQBn-yd_U5dMgevGF8YYM9CR_R1SY",
|
||
"use spaces for tags in deepbooru": "在 deepbooru 中为标签使用空格",
|
||
"Uses the filename.txt file's content as the image labels instead of the instance prompt": "使用 文件名.txt 文件的内容作为图像的提示词而非实例提示词",
|
||
"Uses the image's filename as the image labels instead of the instance prompt": "使用图像的文件名作为图像标签而非实例提示词",
|
||
"Using": "使用",
|
||
"Variables": "变量",
|
||
"Video drop last frame": "丢弃视频最后一帧",
|
||
"Video Quality (crf)": "视频质量（CRF智能码率）",
|
||
"view": null,
|
||
"Warmup Steps": "预热步数",
|
||
"Warning: jpeg found in output folder. Jpeg images are not supported": "警告: 在输出文件夹发现 Jpeg 文件。 Jpeg 图像暂不支持",
|
||
"WebSocket status": "WebSocket 状态",
|
||
"Weight decay for the Adam optimizer, duh.": "Adam 优化器的权重衰减（废话）",
|
||
"Weight for cond match": "用于匹配文字调节(cond)的权重",
|
||
"Weight for cond match (grad/replace-grad mode)": "用于匹配文字调节(cond)的权重 (梯度/取代模式)",
|
||
"Weight for latent match": "用于匹配潜空间(latent)的权重",
|
||
"Weight for latent match (grad/replace-grad mode)": "用于匹配潜空间(latent)的权重 (梯度/取代模式)",
|
||
"When this box is *checked* latents will not be cached. When latents are not cached, you will save a bit of VRAM, but train slightly slower": "当此框被 *选中* 时，将不会缓存潜变量 (latents) 。当潜变量 (latents) 没有被缓存时，你会节省一点显存 (VRAM) ，但训练速度会稍微慢一些",
|
||
"Which model to use?": "使用的模型",
|
||
"With img2img, do exactly the amount of steps the slider specifies (normally you'd do less with less denoising).": "在进行图生图的时候，确切地执行滑块指定的迭代步数（正常情况下更弱的重绘幅度需要更少的迭代步数）",
|
||
"working": null,
|
||
"X offset (A)": "X 偏移 (A)",
|
||
"X offset (B)": "X 偏移 (B)",
|
||
"X/Y Plus-1.4.2": "X/Y图表 Plus",
|
||
"Y offset (A)": "Y 偏移 (A)",
|
||
"Y offset (B)": "Y 偏移 (B)",
|
||
"You can add more wildcards by creating a text file with one term per line and name is mywildcards.txt. Place it in G:\\ai-paint\\extensions\\sd-dynamic-prompts\\wildcards.": "你可以创建一个每行一个术语且名称为 mywildcards.txt 的文本文件来添加更多通配符，并把他放置在.\\extensions\\sd-dynamic-prompts\\wildcards目录下",
|
||
"Your huggingface token to use for cloning files.": "用于下载文件的 huggingface 令牌",
|
||
"SVD": "SVD-视频生成",
|
||
"Z123": "Z123-3D生成",
|
||
"To Generate Your Prompt in All Available Styles, Its Better to set batch count to 43 ( Style Count)": "以所有的可用的样式生成提示词，最好把总批次数设置为 43 （目前样式总数）",
|
||
"SDXL Styles": "SDXL Styles 风格样式选择器",
|
||
"Select Style": "选择样式",
|
||
"Aspect Ratio picker-xhox": "Aspect Ratio picker-xhox 分辨率选取器",
|
||
"SD1.5 resolutions": "SD1.5 常用分辨率",
|
||
"SDXL base resolutions": "SDXL 官方分辨率",
|
||
"Custom resolutions": "自定义分辨率",
|
||
"Aspect Ratio Calculator": "尺寸缩放计算器",
|
||
"Width 1": "宽度 1",
|
||
"Width 2": "宽度 2",
|
||
"Height 1": "高度 1",
|
||
"Height 2": "高度 2",
|
||
"Calculate Height": "计算高度",
|
||
"Calculate Width": "计算宽度",
|
||
"Aspect Ratio:": "比例：",
|
||
"Switch width/height": "互换宽高值",
|
||
"Save the image to a dedicated directory (log\\images).": "保存图像到指定目录 (默认: log\\images)",
|
||
"Save zip archive with images to a dedicated directory (log\\images)": "保存包含图像的 .zip 文件到指定目录 (默认: log\\images)",
|
||
"Send image and generation parameters to SVD tab.": "发送图像和生成参数到SVD视频生成选项卡",
|
||
"ControlNet Integrated": "ControlNet Integrated 控制网络",
|
||
"DynamicThresholding (CFG-Fix) Integrated": "DynamicThresholding (CFG-Fix) Integrated 动态阈值调整（CFG-锁定）",
|
||
"FreeU Integrated": "FreeU Integrated U-Net 加权优化增强",
|
||
"HyperTile Integrated": "HyperTile Integrated 高分辨率图像分块处理",
|
||
"Kohya HRFix Integrated": "Kohya HRFix Integrated 高分辨率图像缩放修正",
|
||
"LatentModifier Integrated": "LatentModifier Integrated 潜空间修改器",
|
||
"MultiDiffusion Integrated": "MultiDiffusion Integrated 分块绘制放大",
|
||
"SelfAttentionGuidance Integrated": "SelfAttentionGuidance Integrated 自我注意引导",
|
||
"StyleAlign Integrated": "StyleAlign Integrated 风格对齐",
|
||
"Batch Folder": "批量文件夹",
|
||
"Batch Upload": "批量上传",
|
||
"Use Mask": "使用蒙版",
|
||
"Instant-ID": "Instant-ID (换脸)",
|
||
"PhotoMaker": "PhotoMaker (个性化人像图片)",
|
||
"Share attention in batch": "在一批生成中共享注意力",
|
||
"Vary seeds for X": "X 轴 变异种子",
|
||
"Vary seeds for Y": "Y 轴 变异种子",
|
||
"Vary seeds for Z": "Z 轴 变异种子",
|
||
"Use different seeds for images along X axis.": "为 X 轴的每张图片使用不同随机种子",
|
||
"Use different seeds for images along Y axis.": "为 Y 轴的每张图片使用不同随机种子",
|
||
"Use different seeds for images along Z axis.": "为 Z 轴的每张图片使用不同随机种子",
|
||
"Mimic Scale": "模拟 CFG 值",
|
||
"Threshold Percentile": "阈值百分比",
|
||
"Mimic Mode": "模拟模式",
|
||
"Mimic Scale Min": "模拟 CFG 最小值",
|
||
"Cfg Mode": "CFG 模式",
|
||
"Cfg Scale Min": "CFG 最小值",
|
||
"Separate Feature Channels": "分享功能通道",
|
||
"Scaling Startpoint": "缩放起点",
|
||
"Variability Measure": "可变性测量",
|
||
"Interpolate Phi": "Phi插值",
|
||
"Tile Size": "分块尺寸",
|
||
"Swap Size": "重叠交换尺寸",
|
||
"Max Depth": "最大深度",
|
||
"Scale Depth": "缩放深度",
|
||
"Tile Width": "分块宽度",
|
||
"Tile Height": "分块高度",
|
||
"Tile Overlap": "分块重叠",
|
||
"Tile Batch Size": "分块单批数量",
|
||
"Block Number": "分块数量",
|
||
"Downscale Factor": "缩小系数",
|
||
"Start Percent": "开始百分比",
|
||
"End Percent": "结束百分比",
|
||
"Downscale After Skip": "跳过后缩小",
|
||
"Downscale Method": "缩小算法",
|
||
"Upscale Method": "放大算法",
|
||
"Sharpness Multiplier": "锐度倍数",
|
||
"Sharpness Method": "锐度算法",
|
||
"Tonemap Multiplier": "色调映射倍数",
|
||
"Tonemap Method": "色调映射算法",
|
||
"Tonemap Percentile": "色调映射百分比",
|
||
"Contrast Multiplier": "对比度倍数",
|
||
"Combat Method": "Combat算法",
|
||
"Combat Cfg Drift": "Combat CFG 漂移",
|
||
"Rescale Cfg Phi": "重缩放 CFG Phi插值",
|
||
"Extra Noise Type": "额外噪声类型",
|
||
"Extra Noise Method": "额外噪声算法",
|
||
"Extra Noise Multiplier": "额外噪声倍数",
|
||
"Extra Noise Lowpass": "额外噪声低通滤波",
|
||
"Divisive Norm Size": "Divisive Norm 分裂大小",
|
||
"Divisive Norm Multiplier": "Divisive Norm 分裂倍数",
|
||
"Spectral Mod Mode": "光谱调制模式",
|
||
"Spectral Mod Percentile": "光谱调制百分比",
|
||
"Spectral Mod Multiplier": "光谱调制倍数",
|
||
"Affect Uncond": "影响非条件",
|
||
"Dyn Cfg Augmentation": "动态 CFG 增强",
|
||
"Blur Sigma": "模糊 Sigma 值",
|
||
"stable-diffusion-webui-localization-zh_Hant": "繁體中文（zh_Hant）語言包",
|
||
"zh_Hant": "zh_Hant (繁體中文)",
|
||
"zh_Hans": "zh_Hans (简体中文)",
|
||
"sd-webui-pnginfo-beautify": "PNGINFO Beautify 美化",
|
||
"PNGINFO Beautify": "PNGINFO Beautify 美化",
|
||
"depth_marigold": "Marigold Depth 高精度深度图",
|
||
"depth_anything": "Depth Anything",
|
||
"##@.controlnet_control_type_filter_group##Normal": "法线图",
|
||
"##txt2img_controlnet_ControlNet_controlnet_type_filter_radio##Normal": "法线图",
|
||
"##img2img_controlnet_ControlNet_controlnet_type_filter_radio##Normal": "法线图",
|
||
"@@/^control_v1p_sd15_brightness (\\[\\w+\\])$/": "control_v1p_sd15_brightness $1 (光效 文字)",
|
||
"@@/^control_v1p_sd15_illumination (\\[\\w+\\])$/": "control_v1p_sd15_illumination $1 (光影构图)",
|
||
"@@/^ip-adapter-faceid-plusv2_sd15 (\\[\\w+\\])$/": "ip-adapter-faceid-plusv2_sd15 $1 (IP-Adapter-FaceID)",
|
||
"@@/^ip-adapter-faceid-portrait-v11_sd15 (\\[\\w+\\])$/": "ip-adapter-faceid-portrait-v11_sd15 $1 (IP-Adapter-FaceID Portrait 肖像照)",
|
||
"@@/^photomaker-v1 (\\[\\w+\\])$/": "photomaker-v1 $1 (PhotoMaker 个性化人像图片)",
|
||
"@@/^t2iadapter_zoedepth_(w+) (\\[\\w+\\])$/": "t2iadapter_zoedepth_$1 $2 (ZoeDepth 结合相对和绝对深度)",
|
||
"@@/^outfitToOutfit_v20 (\\[\\w+\\])$/": "outfitToOutfit_v20 $1 (服裝 更改人物服裝)",
|
||
"@@/^ip-adapter_sd15_light (\\[\\w+\\])$/": "IP-Adapter light $1 (提示詞優先)",
|
||
"@@/^ip-adapter-plus_sd15 (\\[\\w+\\])$/": "IP-Adapter Plus $1 (參考整體風格 例如服裝)",
|
||
"@@/^ip-adapter-plus-face_sd15 (\\[\\w+\\])$/": "IP-Adapter Face $1 (參考臉與发型)",
|
||
"@@/^control_v1p_sd15_qrcode (\\[\\w+\\])$/": "control_v1p_sd15_qrcode $1 (QR Code)",
|
||
"@@/^control_v1p_sd15_qrcode_monster (\\[\\w+\\])$/": "control_v1p_sd15_qrcode_monster $1 (Controlnet QR Code Monster v1 For SD-1.5)",
|
||
"@@/^control_v1p_sd15_qrcode_monster_v2 (\\[\\w+\\])$/": "control_v1p_sd15_qrcode_monster_v2 $1 (Controlnet QR Code Monster v2 For SD-1.5)",
|
||
"@@/^controlnetQRCodeMonster_v2Ckpt (\\[\\w+\\])$/": "controlnetQRCodeMonster_v2Ckpt $1 (Controlnet QR Code Monster v2 For SD-1.5 ckpt)",
|
||
"ip-adapter_face_id_plus": "ip-adapter_face_id_plus (InsightFace+CLIP-H IP-Adapter)",
|
||
"ip-adapter-auto": "ip-adapter-auto (IP-Adapter 自動判斷)",
|
||
"Style Fidelity": "风格仿真度",
|
||
"Gamma Correction": "伽馬校正 (预处理时检测的图像亮度)",
|
||
"face_yolov8n.pt": "face_yolov8n.pt (2D / 寫實 臉)",
|
||
"face_yolov8n_v2.pt": "face_yolov8n_v2.pt (2D / 寫實 臉)",
|
||
"face_yolov8s.pt": "face_yolov8s.pt (2D / 寫實 臉)",
|
||
"face_yolov8m.pt": "face_yolov8m.pt (2D / 寫實 臉)",
|
||
"hand_yolov8n.pt": "hand_yolov8n.pt (2D / 寫實 手)",
|
||
"hand_yolov8s.pt": "hand_yolov8s.pt (2D / 寫實 手)",
|
||
"person_yolov8n-seg.pt": "person_yolov8n-seg.pt (2D / 寫實 全身)",
|
||
"person_yolov8s-seg.pt": "person_yolov8s-seg.pt (2D / 寫實 全身)",
|
||
"mediapipe_face_full": "mediapipe_face_full (寫實 臉)",
|
||
"mediapipe_face_short": "mediapipe_face_short (寫實 臉)",
|
||
"mediapipe_face_mesh": "mediapipe_face_mesh (寫實 臉)",
|
||
"mediapipe_face_mesh_eyes_only": "mediapipe_face_mesh_eyes_only (寫實 眼)",
|
||
"deepfashion2_yolov8s-seg.pt": "deepfashion2_yolov8s-seg.pt (寫實 服裝)",
|
||
"genitalia.pt": "genitalia.pt (寫實 生殖器)",
|
||
"pussyV2.pt": "pussyV2.pt (2D / 寫實 生殖器 女)",
|
||
"penisV2.pt": "penisV2.pt (2D / 寫實 生殖器 男)",
|
||
"nipple.pt": "nipple.pt (2D / 寫實 乳頭)",
|
||
"female-breast.pt": "female-breast.pt (寫實 胸部)",
|
||
"female_breast_v1.1-sensitive.pt": "female_breast_v1.1-sensitive.pt (寫實 胸部)",
|
||
"female_breast_v2.pt": "female_breast_v2.pt (寫實 胸部 不含衣服)",
|
||
"female_breast_v3.pt": "female_breast_v3.pt (寫實 胸部 不含衣服)",
|
||
"female_breast_v3.2.pt": "female_breast_v3.2.pt stable (寫實 胸部 不含衣服)",
|
||
"female_breast_v4.2.pt": "female_breast_v4.2.pt (寫實 胸部 奇幻 不含衣服)",
|
||
"lips_v1.pt": "lips_v1.pt (2D / 寫實 嘴唇)",
|
||
"Eyes.pt": "Eyes.pt (2D / 寫實 眼)",
|
||
"animal_ears.pt": "animal_ears.pt (2D 獸耳)",
|
||
"breasts_seg.pt": "breasts_seg.pt (2D 胸部 包含部分衣服)",
|
||
"vagina-v2.6.pt": "vagina-v2.6.pt (寫實 生殖器 女)",
|
||
"vagina-v3.2.pt": "vagina-v3.2.pt (寫實 生殖器 女 奇幻)",
|
||
"FacesV1.pt": "FacesV1.pt (2D / 寫實 / 獸迷 臉)",
|
||
"PitHandDetailer-v1-seg.pt": "PitHandDetailer-v1-seg.pt (2D / 寫實 / 手)",
|
||
"PitHandDetailer-v1b-seg.pt.pt": "PitHandDetailer-v1b-seg.pt (2D / 寫實 / 手)",
|
||
"PitEyeDetailer-v1-seg.pt": "PitEyeDetailer-v1-seg.pt (2D / 寫實 / 單眼)",
|
||
"PitEyeDetailer-v1b-seg.pt": "PitEyeDetailer-v1b-seg.pt (2D / 寫實 / 單眼)",
|
||
"Eyeful_v1.pt": "Eyeful_v1.pt (2D / 寫實 / 單眼)",
|
||
"Anzhc Eyes -seg-hd.pt": "Anzhc Eyes -seg-hd.pt (2D / 寫實 / 單眼)",
|
||
"Anzhc Face -seg.pt": "Anzhc Face -seg.pt (2D / 寫實 / 臉)",
|
||
"PitGlassesDetailer-v1-seg.pt": "PitGlassesDetailer-v1-seg.pt (眼鏡)",
|
||
"##settings_sampler-params##uniform": "均勻",
|
||
"4x_DWTP_DS_DAT2_V3": "4x_DWTP_DS_DAT2_V3 (黑白 漫畫 文字)",
|
||
"4x_DWTP_DS_dat2_v3_2": "4x_DWTP_DS_dat2_v3_2 (黑白 漫畫 文字)",
|
||
"4x_IllustrationJaNai_V1_DAT2_190k": "4x_IllustrationJaNai_V1_DAT2_190k (彩色 插畫 漫畫封面 修復)",
|
||
"4x_IllustrationJaNai_V1_ESRGAN_135k": "4x_IllustrationJaNai_V1_ESRGAN_135k (彩色 插畫 漫畫封面 修復)",
|
||
"2xHFA2kSwinIR-S": "2xHFA2kSwinIR-S (動畫 降躁 锐化)",
|
||
"2xHFA2kShallowESRGAN": "2xHFA2kShallowESRGAN (動畫 降躁 锐化)",
|
||
"4xLSDIR": "4xLSDIR (寫實 修復)",
|
||
"4xLSDIRplus": "4xLSDIRplus (寫實 修復)",
|
||
"4xFFHQDAT": "4xFFHQDAT (寫實 臉 降躁)",
|
||
"4xFFHQLDAT": "4xFFHQLDAT (寫實 臉 降躁 適用於低品質圖像)",
|
||
"4xFaceUpDAT": "4xFaceUpDAT (寫實 臉)",
|
||
"4xFaceUpSharpDAT": "4xFaceUpSharpDAT (寫實 臉 降躁 锐化)",
|
||
"4xFaceUpSharpLDAT": "4xFaceUpSharpLDAT (寫實 臉 降躁 锐化 適用於低品質圖像)",
|
||
"4x_DWTP_descreenton_H_esrgan": "4x_DWTP_descreenton_H_esrgan (漫畫 去除網點)",
|
||
"4x_SmolFace_200k": "4x_SmolFace_200k (像素 轉高清)",
|
||
"4x_SmolFace_clean": "4x_SmolFace_clean (像素 轉高清)",
|
||
"4x_PixelPerfectV4_137000_G": "4x_PixelPerfectV4_137000_G (像素 轉高清)",
|
||
"4x_escale_100000_G": "4x_escale_100000_G (動漫)",
|
||
"1x_PixelSharpen_100000": "1x_PixelSharpen_100000 (像素 去模糊)",
|
||
"8x_NMKD-Typescale_175k": "8x_NMKD-Typescale_175k (文字)",
|
||
"4xFSDedither_Manga": "4xFSDedither_Manga (像素 漫畫)",
|
||
"4x_NMKD-UltraYandere_300k": "4x_NMKD-UltraYandere_300k (動漫)",
|
||
"##@#setting_emphasis##Original": "Original (原始強調實作)",
|
||
"##@#setting_emphasis##No norm": "No norm (適合 SDXL)",
|
||
"ML-Danbooru Caformer dec-5-97527": "ML-Danbooru Caformer dec-5-97527 (詳細 緩慢 推薦)",
|
||
"WD14 ConvNeXTV2 v1": "WD14 ConvNeXTV2 v1 (稍微詳細 快速 推薦)",
|
||
"sd-webui-lobe-theme": "Lobe theme"
|
||
}
|