7901 lines
608 KiB
JSON
7901 lines
608 KiB
JSON
{
|
||
" Setting": "设定",
|
||
"\"Hug the middle\" during interpolation": "在插值的途中 \"主动去找中间点\"",
|
||
"# of in-between frames that will not be directly diffused": "不会被直接扩散的中间帧的 # 数",
|
||
"# of threads to use for hash calculation (increase if using an SSD)": "用於杂凑值计算的缐程数（如果使用 SSD 可适量增加）",
|
||
"# Training Epochs": "训练多少期(Epochs)",
|
||
"##@#setting_emphasis##No norm": "No norm (适合 SDXL)",
|
||
"##@#setting_emphasis##Original": "Original (原始强调实作)",
|
||
"##@.controlnet_control_type_filter_group##Normal": "法缐图",
|
||
"##img2img_controlnet_ControlNet_controlnet_type_filter_radio##Normal": "法缐图",
|
||
"##settings_sampler-params##uniform": "均匀",
|
||
"##txt2img_controlnet_ControlNet_controlnet_type_filter_radio##Normal": "法缐图",
|
||
"'add_soundtrack' and 'soundtrack_path' aren't being honoured in \"Interpolate an existing video\" mode. Original vid audio will be used instead with the same slow-mo rules above.": "‘新增音讯’和‘音讯路径’将不会在‘插入现有影片’模式中执行，原有影片的音讯将会使用相同的慢动作规则设定",
|
||
"'seed_behavior' will be forcibly set to 'schedule'.": "“种子行为” 会被强制设为 “调度计劃” 来进行调度",
|
||
"(\"When searched\" option will only show the item when the search string has 4 characters or more)": "(\"检索时\" 选项只有当搜寻字串有4个或更多字符时, 才会显示隐藏栏目)",
|
||
"(0 = default (7 for karras, 1 for polyexponential); higher values result in a more steep noise schedule (decreases faster))": "(0 = 预设 (karras 选择 7, polyexponential 选择 1); 值越高噪点调度曲缐越陡峭 (递减更快速))",
|
||
"(0 = default (7 for karras, 1 for polyexponential); higher values result in a steeper noise schedule (decreases faster))": "(0 = 预设 (karras 设定 7, polyexponential 设定 1); 值越高会得到越陡峭的噪点调度曲缐 (递减更快速))",
|
||
"(0 = default (~0.03); minimum noise strength for k-diffusion noise scheduler)": "(0 = 预设 (~0.03); k-diffusion 噪点调度器的最小噪点强度)",
|
||
"(0 = default (~14.6); maximum noise strength for k-diffusion noise schedule)": "(0 = 预设 (~14.6); k-diffusion 噪点调度器的最大噪点强度)",
|
||
"(0 = default (~14.6); maximum noise strength for k-diffusion noise scheduler)": "(0 = 预设 (~14.6); k-diffusion 噪点调度器的最大噪点强度)",
|
||
"(0 = disable)": "(0 = 停用)",
|
||
"(0 = disabled (default); should be lower than denoising strength)": "(0 = 停用 (预设); 设定的数值应小於重绘幅度)",
|
||
"(0 = inf; end value of the sigma range; only applies to Euler, Heun, and DPM2)": "(0 = inf; sigma 波动範围的最大值; 仅作用於 Euler, Heun, 和 DPM2 採样方法)",
|
||
"(0 = maximum effect; 1 = minimum effect)": "(0 = 最大强度; 1 = 最小强度)",
|
||
"(0 = No limit)": "(0 = 无限制)",
|
||
"(0 = no tiling)": "(0 = 不分块)",
|
||
"(0: disable, -1: show all images. Too many images can cause lag)": "(0: 停用, -1: 显示全部图像。过多图像会导致网页滞後)",
|
||
"(0=disable, higher=faster)": "(0 = 停用, 数值越大 = 越快速)",
|
||
"(1 = original size)": "(1 = 原始尺寸)",
|
||
"(1) Face Detection": "(1) 脸部辨识",
|
||
"(2) Crop and Resize the Faces": "(2) 裁切和调整脸部大小",
|
||
"(3) Recreate the Faces": "(3) 脸部重绘",
|
||
"(4) Paste the Faces": "(4) 脸部融合",
|
||
"(5) Blend the entire image": "(5) 全图重绘融合",
|
||
"(A1) Primary": "(A1) 主要",
|
||
"(A2) Primary": "(A2) 主要",
|
||
"(A3) Primary": "(A3) 主要",
|
||
"(A4) Primary": "(A4) 主要",
|
||
"(A5) Primary": "(A5) 主要",
|
||
"(A6) Primary": "(A6) 主要",
|
||
"(A7) Primary": "(A7) 主要",
|
||
"(A8) Primary": "(A8) 主要",
|
||
"(A9) Primary": "(A9) 主要",
|
||
"(A10) Primary": "(A10) 主要",
|
||
"(Add folder names that shouldn't be searched for wildcards, separated by comma.)": "(为万用字元目录新增不会被搜寻的名称，并以逗号分隔)",
|
||
"(alternative implementation for the above; used prior to 1.6.0 for DDIM sampler; ignored if the above is set; changes seeds)": "(上述选项的另一种实作方式; 在 1.6.0 之前用於 DDIM 採样方法; 如果设定了上述选项, 则此选项将被忽略; 影响随机性)",
|
||
"(alternative implementation for the above; used prior to 1.6.0 for DDIM sampler; overrides the above if set; WARNING: truncates negative prompt if it's too long; changes seeds)": "(上述选项的另一种实作方式; 在 1.6.0 之前用於 DDIM 採样方法; 如果设定了本选项, 则覆盖上方选项; 警告: 若反向提示词太长, 会被截断; 本选项影响随机性)",
|
||
"(amount of additional noise to counteract loss of detail during sampling)": "(用於抵消採样过程中丢失细节的额外噪点量)",
|
||
"(amount of additional noise to counteract loss of detail during sampling; only applies to Euler, Heun, and DPM2)": "(用於抵消採样过程中丢失细节的额外噪点量; 仅作用於 Euler, Heun, 和 DPM2 採样方法)",
|
||
"(amount of stochasticity; only applies to Euler, Heun, and DPM2)": "(随机流失率大小; 仅作用於 Euler, Heun, 和 DPM2 採样方法)",
|
||
"(an be any valid CSS value)": "(可为任意有效 CSS 值)",
|
||
"(automatically enable options for backwards compatibility when importing generation parameters from infotext that has program version.)": "(汇入生成参数时根据其项目程序版本资讯自动启用选项以向後相容)",
|
||
"(B1) Secondary": "(B1) 第二",
|
||
"(B2) Secondary": "(B2) 第二",
|
||
"(B3) Secondary": "(B3) 第二",
|
||
"(B4) Secondary": "(B4) 第二",
|
||
"(B5) Secondary": "(B5) 第二",
|
||
"(B6) Secondary": "(B6) 第二",
|
||
"(B7) Secondary": "(B7) 第二",
|
||
"(B8) Secondary": "(B8) 第二",
|
||
"(B9) Secondary": "(B9) 第二",
|
||
"(B10) Secondary": "(B10) 第二",
|
||
"(booru only)": "(仅 booru)",
|
||
"(brush color of inpaint mask)": "(重绘遮罩画笔颜色)",
|
||
"(Buttons will display the contents of the selected directory without acting as a search filter.)": "(按钮将显示所选目录的内容而非作为搜寻过滤器)",
|
||
"(C1) Thertiary": "(C1) 第三",
|
||
"(C2) Thertiary": "(C2) 第三",
|
||
"(C3) Thertiary": "(C3) 第三",
|
||
"(C4) Thertiary": "(C4) 第三",
|
||
"(C5) Thertiary": "(C5) 第三",
|
||
"(C6) Thertiary": "(C6) 第三",
|
||
"(C7) Thertiary": "(C7) 第三",
|
||
"(C8) Thertiary": "(C8) 第三",
|
||
"(C9) Thertiary": "(C9) 第三",
|
||
"(C10) Thertiary": "(C10) 第三",
|
||
"(Cache fp16 weight when enabling FP8, will increase the quality of LoRA. Use more system ram.)": "(当启用 FP8 时缓存 FP16 权重，可提升 LoRA 品质。需使用更多系统记忆体)",
|
||
"(can be any valid CSS value, for example 768px or 20em)": "(可为任意有效 CSS 值, 例如 768px 或 20em)",
|
||
"(CF1) Checkpoint format": "(CF1) 模型格式",
|
||
"(CF2) Checkpoint format": "(CF2) 模型格式",
|
||
"(CF3) Checkpoint format": "(CF3) 模型格式",
|
||
"(CF4) Checkpoint format": "(CF4) 模型格式",
|
||
"(CF5) Checkpoint format": "(CF5) 模型格式",
|
||
"(CF6) Checkpoint format": "(CF6) 模型格式",
|
||
"(CF7) Checkpoint format": "(CF7) 模型格式",
|
||
"(CF8) Checkpoint format": "(CF8) 模型格式",
|
||
"(CF9) Checkpoint format": "(CF9) 模型格式",
|
||
"(CF10) Checkpoint format": "(CF10) 模型格式",
|
||
"(changes seeds drastically; use CPU to produce the same picture across different videocard vendors)": "(显着改变种子效果; 使用 CPU 选项可使不同型号显卡产生相同图像)",
|
||
"(changes seeds drastically; use CPU to produce the same picture across different videocard vendors; use NV to produce same picture as on NVidia videocards)": "(大幅改变种子效果, 使用 CPU 选项使不同型号显卡产生相同图像; 使用 NV 选项来产生与 NVIDIA 显卡相同的图像)",
|
||
"(changes seeds drastically; use CPU to produce the same picture across different vidocard vendors)": "(大幅改变种子效果, 使用 CPU 选项使不同型号显卡产生相同图像)",
|
||
"(Chants are longer prompt presets)": "(Chants 是较长的提示词预设)",
|
||
"(choose Unet model: Automatic = use one with same filename as checkpoint; None = use Unet from checkpoint)": "(选择 Unet 模型: 自动 = 使用与大模型档名相同的档案; 无 = 使用大模型中的 Unet)",
|
||
"(choose VAE model: Automatic = use one with same filename as checkpoint; None = use VAE from checkpoint)": "(选择 VAE 模型: 自动 = 选择与 Stable Diffusion 模型档名相同的 VAE 模型; 无 = 使用所选择的 Stable Diffusion 模型的内建 VAE)",
|
||
"(default brush color of img2img inpaint sketch)": "(图生图塗鸦重绘预设画笔颜色)",
|
||
"(default brush color of img2img sketch)": "(图生图塗鸦预设画笔颜色)",
|
||
"(Delete keyframe, or Add keyframe from ": "(删除或增加关键帧，关键帧目录： ",
|
||
"(directory is hidden if its name starts with \".\")": "(如果目录的名称以 \".\" 开头, 就会被隐藏)",
|
||
"(directory is hidden if its name starts with \".\".)": "(如果目录的名称以 \".\" 开头, 就会被隐藏)",
|
||
"(Disable this option if you're experiencing any issues with downloads.)": "(若在下载时遇到问题, 请停用本选项)",
|
||
"(Disable this option if you're experiencing high CPU usage during video/gif playback)": "(若在影片或 GIF 播放过程中 CPU 佔用过高, 请停用本选项)",
|
||
"(disable to update the selected Gradio theme)": "(停用以更新选中的 Gradio 主题)",
|
||
"(Disable to use the old download method)": "(停用以使用旧下载方式)",
|
||
"(displayed amount will depend on the actual browser window width)": "(实际显示数量取决於实际浏览器视窗宽度)",
|
||
"(do both conditional and unconditional denoising in one batch; uses a bit more VRAM during sampling, but improves speed; previously this was controlled by --always-batch-cond-uncond comandline argument)": "(在同一批次中同时进行正向与反向调整降噪；採样期间将使用更多显存，但会提高速度；过去由 --always-batch-cond-uncond 命令行参数控制)",
|
||
"(do both conditional and unconditional denoising in one batch; uses a bit more VRAM during sampling, but improves speed; previously this was controlled by --always-batch-cond-uncond commandline argument)": "(在单批次内进行条件降噪和无条件降噪; 迭代採样期间需要使用更多的显存，但能提高速度(由 \"--always-batch-cond-uncond\" 启动指令参数控制))",
|
||
"(do not recalculate conds from prompts if prompts have not changed since previous calculation)": "(如果提示词未更改，则不再重新从提示词计算调整参数)",
|
||
"(Do not recalculate conds from prompts if prompts have not changed since previous calculation)": "(若提示词自上次计算後未發生变化, 则不根据提示词重新调整计算)",
|
||
"(Dont open with tilediffusion)": "(请勿和 Tiled Diffusion 同时开启)",
|
||
"(e.g. \"hair/colours/light/...\")": "(例如: \"hair/colors/light/...\")",
|
||
"(Early access models are only downloadable for supporter tier members)": "(抢鲜体验模型仅供支持者级的成员下载)",
|
||
"(Early access models are only downloadable for supporter tier members, Requires API key)": "(抢鲜体验模型仅供支持者级别的成员下载, 需要 API 密钥)",
|
||
"(enable stochasticity; start value of the sigma range; only applies to Euler, Heun, and DPM2)": "(启用随机流失率; sigma 波动範围的最低值; 仅作用於 Euler, Heun, 和 DPM2 採样方法)",
|
||
"(enables hypertile for all modes, including hires fix second pass; noticeable change in details of the generated picture)": "(为所有模型启用 Hypertile, 包括高解析度修复层; 生成图像的细节会有明显变化)",
|
||
"(enables hypertile just for hires fix second pass - regardless of whether the above setting is enabled)": "(仅对高解析度修复层启用 Hypertile - 无论是否启用上述选项)",
|
||
"(ENSD; does not improve anything, just produces different results for ancestral samplers - only useful for reproducing images)": "(ENSD: 对图像品质无任何提升, 只为 Ancestral 採样方法产生不同的结果 - 仅对复现图像有用)",
|
||
"(Experimental, keep cond caches across jobs, reduce overhead.)": "(实验性功能；在不同任务中保留缓存以减少开销)",
|
||
"(extra text to add before <...> when adding extra network to prompt)": "(新增扩展模型到提示词时, 在 <...> 之前新增的额外文本)",
|
||
"(fixes very slow loading speed in some cases)": "(修复某些情况下载入速度非常慢的问题)",
|
||
"(For [red:green:N]; old: If N < 1, it's a fraction of steps (and hires fix uses range from 0 to 1), if N >= 1, it's an absolute number of steps; new: If N has a decimal point in it, it's a fraction of steps (and hires fix uses range from 1 to 2), othewrwise it's an absolute number of steps)": "(对於如 [red:green:N] 的表达式; 旧: 若 N < 1, 则其表示占总迭代步数的比例 (且高解析度修复使用的範围是 0 - 1), 若 N >= 1, 则其表示一个确定的迭代步数数值; 新: 若 N 值含小数点, 则其表示占总迭代步数的比例 (且高解析度修复使用的範围是 1 - 2), 其他情况则表示一个确定的迭代步数数值)",
|
||
"(for mouse only)": "(仅限滑鼠)",
|
||
"(for small sets of custom tags)": "(少量的自订标籤)",
|
||
"(for use with zero terminal SNR trained models)": "(在使用通过零终信噪比 (Zero Terminal-SNR) 训练的模型时)",
|
||
"(fraction of sampling steps when the swtch to refiner model should happen; 1=never, 0.5=switch in the middle of generation)": "(在迭代步数完成占比的多少切换 Refiner 模型; 1 = 不切换, 0.5 = 在生成迭代步数完成一半时切换)",
|
||
"(from CivitAI)": "(来自 Civitai)",
|
||
"(Full = slow but pretty; Approx NN and TAESD = fast but low quality; Approx cheap = super fast but terrible otherwise)": "(完整 = 慢但显示效果好; Approx NN 和 TAESD = 快速但低品质; Approx cheap = 超级快但最糟糕)",
|
||
"(If not, Approx NN will be used instead; Full live preview method is very detrimental to speed if lowvram/medvram optimizations are enabled)": "(若不启用本选项, 则使用 Approx NN 作为替代; 在 lowvram/medvram 最佳化下使用完整实时预览模式会导致生成速度异常缓慢)",
|
||
"(if not: sort by score)": "(如不启用: 按评分排序标籤)",
|
||
"(if not: use underscores)": "(如不启用: 使用下劃缐)",
|
||
"(if the file size is above the limit, or either width or height are above the limit)": "(如果图像档案大小超过限制, 或者其宽度或高度超过限制)",
|
||
"(If you choose 'Shift' you cannot scroll horizontally, 'Alt' can cause a little trouble in firefox)": "(如果选择 'Shift' 则不能控制水平移动, Firefox 浏览器下选择 'Alt' 会出点小问题)",
|
||
"(If your wildcard files have a specific custom order, disable this to keep it)": "(若万用字元档案有特定的自订顺序, 请停用本选项以保留他们)",
|
||
"(ignore last layers of CLIP network; 1 ignores none, 2 ignores one layer)": "(CLIP 网络的忽略层数; 1 不忽略, 2 忽略 1 层)",
|
||
"(Images are output to ": "(图像将输出到 ",
|
||
"(improves performance when prompt and negative prompt have different lengths; changes seeds)": "(当正向提示词与反向提示词长度不同时启用本选项可以提升性能; 影响随机性)",
|
||
"(in %)": "(%)",
|
||
"(in megapixels)": "(单位: 百万像素)",
|
||
"(in milliseconds)": "(单位: 毫秒)",
|
||
"(in pixels)": "(单位: 像素)",
|
||
"(in sampling steps - show new live preview image every N sampling steps; -1 = only show after completion of batch)": "(每N个採样步骤更新一次实时预览图像; 设定为-1以在每批次完成後显示)",
|
||
"(in tokens - for texts shorter than specified, if they don't fit into 75 token limit, move them to the next 75 token chunk)": "(Token 中短於指定长度的提示词, 如果它们不符合 75 Tokens 的上限, 则将他们移至下一个 75 Tokens 组中)",
|
||
"(Keeps the page navigation always visible at the top, Requires UI reload)": "(保持页面导览列在顶部保持可见, 需重载 UI )",
|
||
"(larger = more neural network layers affected; minor effect on performance)": "(数值越大意味着受影响的神经网络层越多; 对性能影响不大)",
|
||
"(larger = worse performance)": "(数值越大意味着性能越差)",
|
||
"(lets you override the noise schedule for k-diffusion samplers; choosing Automatic disables the three parameters below)": "(覆盖 k-diffusion 採样方法的噪点调度器; 选择自动会停用以下的三个参数)",
|
||
"(LoCon requires SD-WebUI v1.5 or higher, DoRA requires v1.9 or higher)": "(LoCon 需要 SD-WebUI 版本为 v1.5 或更高, DoRA 需要 v1.9 或更高)",
|
||
"(Low values = visible seam)": "(数值越低=接缝越明显)",
|
||
"(M1) Multiplier": "(M1) 倍率",
|
||
"(M2) Multiplier": "(M2) 倍率",
|
||
"(M3) Multiplier": "(M3) 倍率",
|
||
"(M4) Multiplier": "(M4) 倍率",
|
||
"(M5) Multiplier": "(M5) 倍率",
|
||
"(M6) Multiplier": "(M6) 倍率",
|
||
"(M7) Multiplier": "(M7) 倍率",
|
||
"(M8) Multiplier": "(M8) 倍率",
|
||
"(M9) Multiplier": "(M9) 倍率",
|
||
"(M10) Multiplier": "(M10) 倍率",
|
||
"(makes interrupts faster)": "(使中断處理更快速)",
|
||
"(makes it possible to make model to pay (more:1.1) or (less:0.9) attention to text when you use the syntax in prompt; None: disable the mechanism entirely and treat (:.1.1) as literal characters, Ignore: treat all empasised words as if they have no emphasis, Original: the orginal emphasis implementation, No norm: same as orginal, but without normalization (seems to work better for SDXL))": "(使模型在提示词中使用语法时可以对文本进行 (更多:1.1) 或 (更少:0.9) 强调; 无：完全停用该机制并将 (:.1.1) 视作文字字元, 忽略: 将所有强调的提示词视为没有强调, Original: 原始强调实作, No norm: 与原始相同, 但没有规范化 (似乎更适合 SDXL))",
|
||
"(makes it possible to make model to pay (more:1.1) or (less:0.9) attention to text when you use the syntax in prompt; None: disable the mechanism entirely and treat (:.1.1) as literal characters, Ignore: treat all empasised words as if they have no emphasis, Original: the original emphasis implementation, No norm: same as original, but without normalization (seems to work better for SDXL))": "(使模型在提示词中使用语法时可以对文本进行 (更多:1.1) 或 (更少:0.9) 强调; 无：完全停用该机制并将 (:.1.1) 视作文字字元, 忽略: 将所有强调的提示词视为没有强调, Original: 原始强调实作, No norm: 与原始相同, 但没有规范化 (似乎更适合 SDXL))",
|
||
"(Match initial noise to official SDXL implementation - only useful for reproducing images)": "(将初始噪点和官方 SDXL 实作相符合 - 仅对复现图像有用)",
|
||
"(method to decode latent to image)": "(把潜变数解码为图像的方法)",
|
||
"(method to encode image to latent (use in img2img, hires-fix or inpaint mask))": "(把图像编码为潜变数的方法 (在图生图, 高解析度修复或重绘遮罩中启用))",
|
||
"(minimal change in the generated picture)": "(对生成的图像影响最小)",
|
||
"(Model names [with file extension] or their hashes, separated by commas)": "(模型名 [需要带档案拓展名] 或它们的杂凑值, 用逗号分隔)",
|
||
"(models in subdirectories like photo/sd15.ckpt will be listed as just sd15.ckpt)": "(例如 “写实模型/sd15.ckpt” 这样放在子目录中的模型会仅显示为 \"sd15.ckpt\")",
|
||
"(must be < sampling steps)": "(需小於迭代步数)",
|
||
"(No Trigger Word)": "(无触發词)",
|
||
"(noise multiplier; applies to Euler a and other samplers that have a in them)": "(噪点倍率: 适用於 Euler a 和其他具有 a 的採样方法)",
|
||
"(noise multiplier; currently only applies to ancestral samplers (i.e. Euler a) and SDE samplers)": "(噪点倍率; 当前仅作用於 Ancestral 採样方法 (例如 Euler a) 和 SDE 採样方法)",
|
||
"(noise multiplier; higher = more unperdictable results)": "(噪点倍率; 越高 = 结果越难以预测)",
|
||
"(noise multiplier; higher = more unpredictable results)": "(噪点倍率; 越高 = 结果越难以预测)",
|
||
"(normally you'd do less with less denoising)": "(正常情况下越小的重绘幅度需要的迭代步数更少)",
|
||
"(not for Video Input mode)": " (不用於影片输入模式)",
|
||
"(notification.mp3 should be present in the root directory)": "(通知声音档案 (notification.mp3) 需放入根目录中)",
|
||
"(O)Output Model Name": "输出模型档名",
|
||
"(O1) Output ckpt Name": "(O1) 输出模型档名",
|
||
"(O2) Output ckpt Name": "(O2) 输出模型档名",
|
||
"(O3) Output ckpt Name": "(O3) 输出模型档名",
|
||
"(O4) Output ckpt Name": "(O4) 输出模型档名",
|
||
"(O5) Output ckpt Name": "(O5) 输出模型档名",
|
||
"(O6) Output ckpt Name": "(O6) 输出模型档名",
|
||
"(O7) Output ckpt Name": "(O7) 输出模型档名",
|
||
"(O8) Output ckpt Name": "(O8) 输出模型档名",
|
||
"(O9) Output ckpt Name": "(O9) 输出模型档名",
|
||
"(O10) Output ckpt Name": "(O10) 输出模型档名",
|
||
"(obsolete; set to 0 and use the two settings above instead)": "(已过时; 设定为 0 以使用上述两个选项的设定)",
|
||
"(only applies if non-zero and overrides above)": "(仅在数值设定为非零时启用, 启用时覆盖原 Token 合併比率设定)",
|
||
"(Only applies to Aria2)": "(只应用於 Aria2)",
|
||
"(Only relevant if the above option is enabled)": "(仅在上方选项启用时相关)",
|
||
"(Optional) Path to directory with classification/regularization images": "（可选）带有类别(正则) 图像的目录路径",
|
||
"(optional) separated by commas. EX: Character Name/Style Attributes": "（可选）用逗号分隔，例如：Character Name/Style Attributes",
|
||
"(or open as text in a new page)": "（或在新的页籤检视）",
|
||
"(Order for extra network models and wildcards in dropdown)": "(下拉选单中的扩展模型和万用字元排列顺序)",
|
||
"(otherwise, those detected as for incompatible version of Stable Diffusion will be hidden)": "(否则, 将隐藏不相容当前载入的 Stable Diffusion 模型版本的模型)",
|
||
"(Overrides the download folder location when saving images.)": "(储存图像时覆盖下载目录位置)",
|
||
"(PLACEHOLDER, USE THE ONE IN 2IMG) Enable debug mode": "(本选项仅作佔位，请使用生成图像页面中的相同选项) 启用侦错模式",
|
||
"(produce a tileable picture)": "(生成可衔接拼贴的图像)",
|
||
"(puts prompt and negative prompt inside the Generate tab, leaving more vertical space for the image on the right)": "(将正反提示词输入框限制在 “生成” 页籤的左侧，为右侧图像留出更多垂直空间)",
|
||
"(requires Reload UI)": "(需要重载 UI)",
|
||
"(requires restart)": "(需要重启)",
|
||
"(Requires the": "(需要安装 ",
|
||
"(Requires UI reload)": "(需重载 UI)",
|
||
"(Requires Web-UI restart)": "(需重启 Web-UI)",
|
||
"(Requires Web-UI Restart)": "(需要重启 Web-UI)",
|
||
"(S1) Inter-Method": "(S1) 插值方法",
|
||
"(S2) Inter-Method": "(S2) 插值方法",
|
||
"(S3) Inter-Method": "(S3) 插值方法",
|
||
"(S4) Inter-Method": "(S4) 插值方法",
|
||
"(S5) Inter-Method": "(S5) 插值方法",
|
||
"(S6) Inter-Method": "(S6) 插值方法",
|
||
"(S7) Inter-Method": "(S7) 插值方法",
|
||
"(S8) Inter-Method": "(S8) 插值方法",
|
||
"(S9) Inter-Method": "(S9) 插值方法",
|
||
"(S10) Inter-Method": "(S10) 插值方法",
|
||
"(save images that has been interrupted in mid-generation; even if not saved, they will still show up in webui output.)": "(储存生成时被中断的图像; 即使没有储存, 他们依旧会显示在 webui 输出中)",
|
||
"(SD-WebUI v1.5 and higher treats LoCON's the same as LORA's, Requires UI reload)": "(SD-WebUI v1.5 及更高版本把 LoCon 视作 LORA, 需重载 UI )",
|
||
"(SD-WebUI v1.5 and higher treats LoCON's the same as LORA's, so they can be placed in the LORA folder.)": "(SD-WebUI v1.5 及更高版本把 LoCon 视作 LORA，所以 LoCon 也可放入 LORA 目录)",
|
||
"(See": "(检视 ",
|
||
"(select Disco output format).": "（选择Disco输出格式）。",
|
||
"(selected items appear first)": "(选中组件优先显示)",
|
||
"(separate by comma)": "(用逗号分隔)",
|
||
"(setting entries that also appear in img2img interfaces)": "(同样会出现在 “图生图” 介面的设定选项)",
|
||
"(setting entries that also appear in txt2img interfaces)": "(同样会出现在 “文生图” 介面的设定选项)",
|
||
"(setting entries that also appear in txt2img/img2img interfaces)": "(组态同时出现在 文生图 / 图生图 介面的选项条目)",
|
||
"(setting entries that appear at the top of page rather than in settings tab)": "(新增位於网页介面顶部的选项, 而不是在设定页籤中)",
|
||
"(Shows the \"is currently outdated\" messages in the console when scanning models for available updates\")": "(扫描模型可用更新时在控制台中显示 \"当前已过时\" 资讯)",
|
||
"(skip negative prompt for some steps when the image is almost ready; 0=disable, higher=faster)": "(当图像接近生成完成时, 跳过部分步数的负面提示词影响; 0=停用, 数值越大=越快速)",
|
||
"(so they are used as literal brackets and not for emphasis)": "(启用後作为字面意义上的括号使用, 不起强调作用)",
|
||
"(Stage 3, 4, and 6 only show a guide and do nothing actual processing.)": "（步骤 3、4和6只显示指南，不做实际的操作。）",
|
||
"(switch to another model in the middle of generation)": "(在生成中途切换的另一个模型)",
|
||
"(Takes longer on first run)": "(第一次执行时需要更长时间)",
|
||
"(takes precedence over the regular space setting for that position)": "(优先於在该位置的其他一般空间设定)",
|
||
"(Technical button, needed for testing)": "(技术性按钮, 用於测试)",
|
||
"(Technical button, neededs for testing)": "(技术性按钮, 用於测试)",
|
||
"(The 'JumpTo...' keybinds (End & Home key by default) will select the first non-embedding result of their direction on the first press for quick navigation in longer lists.)": "('JumpTo...' 键位绑定 (一般预设是 End & Home 键) 会在第一次按下时选择其方向上第一个非嵌入式模型标籤, 便於在较长的列表中快速导览)",
|
||
"(this is optional. Perform color correction on the img2img results and expect flickering to decrease. Or, you can simply change the color tone from the generated result.)": "（此步骤可选。对图生图的结果进行颜色校正，可能会减少影片闪烁。或者，你也可以简单地在生成结果中调色。）",
|
||
"(To work correctly in firefox, turn off 'Automatically search the page text when typing' in the browser settings)": "(如想在 Firefox 浏览器中正常工作，请在浏览器设定中关闭 \"若在文本框外输入，则在页面中寻找文本\" 选项)",
|
||
"(Total)": "(合计)",
|
||
"(triggers when a tensor with NaNs is produced in VAE; disabling the option in this case will result in a black square image)": "(在 VAE 中生成带有 NaNs 的 tensor 时触發，这种情形下若本选项停用会导致黑图)",
|
||
"(triggers when a tensor with NaNs is produced in VAE; disabling the option in this case will result in a black square image; if enabled, overrides the option below)": "(在 VAE 中生成带有 NaNs 的 tensor 时触發，这种情形下若本选项停用会导致黑图; 若启用本选项, 将覆盖此选项下方的选项)",
|
||
"(Use # anywhere in the prompt to hide the text between # and the end of the line from the generation.)": "(在提示词中的任意位置使用 # 可以从生成中隐藏 # 和行尾之间的文本)",
|
||
"(use (text) to make model pay more attention to text and [text] to make it pay less attention)": "(对提示词使用 (文本) 这样的格式使模型更关注该文本, 同理, 使用 [文本] 这样的格式来减少对该文本的关注度)",
|
||
"(Use FP8 to store Linear/Conv layers' weight. Require pytorch>=2.1.0.)": "(使用 FP8 来储存 Linear/Conv 层的权重。需要 Pytorch 版本 >=2.1.0)",
|
||
"(used for refiner model negative prompt)": "(用於 refiner 模型的反向提示词)",
|
||
"(used for refiner model prompt)": "(用於 refiner 模型的正向提示词)",
|
||
"(useful for developing: if you make changes to UI scripts code, it is applied when the UI is reloded.)": "(对於开發很方便: 如果改动了 UI 脚本程式码, 它会在UI重新载入时套用程式码相应的更改)",
|
||
"(Useful for users who use PortMaster or other software that controls the DNS)": "(对於使用 PortMaster 或其他控制 DNS 的软体的使用者有用)",
|
||
"(Useful to prevent hanging if you use a very large wildcard collection.)": "(适用於本地有大型万用字元集合时, 预防刷新程序被挂起)",
|
||
"(Warning: This is an external site and very likely contains NSFW examples!)": "(警告: 外部网站可能包含成人内容!)",
|
||
"(When calculating how many tokens the prompt has, also consider tokens added by enabled styles.)": "(在启用提示词次元长度计数器时同时计入已启用的预设样式中含有的词元数)",
|
||
"(when generating captions using postprocessing; Ignore = use generated; Keep = use original; Prepend/Append = combine both)": "(使用後期處理生成标籤时的行为; 忽略 = 启用生成; 保留 = 使用原有; 新增到开头/追加至末尾 = 结合两者)",
|
||
"(when inpainting, overlay the original image over the areas that weren't inpainted.)": "(当使用区域重绘时, 将原图覆盖到未选中重绘的区域)",
|
||
"(when reading generation parameters from text into UI)": "(适用於从文本中读取生成参数并套用到使用者介面时)",
|
||
"(when reading generation parameters from text into UI))": "(适用於从文本中读取生成参数并套用到使用者介面时)",
|
||
"(When using controlnet together, you can put in large values (even 1.0 is possible).)": "（当使用 ControlNet 进行配合时，你可以尝试设定更大的值（甚至1.0都可以）。）",
|
||
"(when using Interrupt button, if generating more than one image, stop after the generation of an image has finished, instead of immediately)": "(当使用中断按钮, 且当前生成的不止一张图像时, 将会在完成当前图像生成後停止, 而不是立即停止当前图像的生成)",
|
||
"(will append after comma if the above is enabled)": "(如启用了上方选项，则在逗号後追加)",
|
||
"(Will append any content type and sub folders to the custom path.)": "(会将所有内容类型和子目录附加到自订路径)",
|
||
"(will keep models other than the currently used one in RAM rather than VRAM)": "(在记忆体而不是显存中保留除当前使用模型以外的其他模型)",
|
||
"(Will use & prefer the native activation keywords settable in the extra networks UI. Other functionality requires the": "(使用并优先使用在扩展网络 UI 中设定的本地启用关键词。其他功能需要安装 ",
|
||
"(will use a third-party model on generation result to reconstruct faces)": "(使用第三方模型对生成图像的人脸进行修复)",
|
||
"(WIP, expect some bugs)": "(未完成, 存在一定的问题)",
|
||
"(you can also manually enter any of themes from the": "(你也可以手动输入任何 HF 主题空间名，参考",
|
||
"(You can create your own API key in your": "(可自行建立个人 API 密钥, 在 ",
|
||
"(you can set per-model VAE either by editing user metadata for checkpoints, or by making the VAE have same name as checkpoint)": "(可通过编辑大模型的使用者元数据或使 VAE 与大模型同名来逐个设定模型使用的 VAE)",
|
||
"* change 'type' to clear/reload dropdowns.": "改变坐标轴类型可清空、刷新选项",
|
||
"* check your CLI for outputs": "* 检查 CLI 的输出",
|
||
"* check your CLI for outputs *": "* 检查 CLI 的输出 *",
|
||
"*Get depth from uploaded video*": "*从上传的影片中获取深度*",
|
||
"*Important* notes on Prompts": "关於提示词模式的重要提示",
|
||
"*Interpolate Pics*": "*插值图像*",
|
||
"*Interpolate Video*": "*插值影片*",
|
||
"*Only in use with pix2pix checkpoints!*": "*仅在载入 Pix2Pix 模型时生效!*",
|
||
"*READ ME before you use this mode!*": "*请在使用前认真阅读*",
|
||
"*Stitch frames to video*": "*将帧缝合为影片*",
|
||
"*Upscale uploaded video*": "*放大已上传的影片*",
|
||
"*Work In Progress*. All params below are going to be keyframable at some point. If you want to speedup the integration, join Deforum's development. 😉": "*正在开發*. 下面的所有参数在某些点是关键的。如果你想加快整合，请加入 Deforum 的开發。😉",
|
||
", and the underlying": "，底层 ",
|
||
", port for AUTOMATIC1111's webui maintained by": "，由 AUTOMATIC1111 的 WebUI 维护的连接埠",
|
||
", Requires UI reload)": ", 需重载 UI )",
|
||
", this required for some downloads, Requires UI reload)": ", 这用於部分模型的下载, 需要重载 UI)",
|
||
"- Adjust brush size": " - 调整笔刷大小",
|
||
"- Background": "- 背景",
|
||
"- Body": "- 身体",
|
||
"- Camera": "- 镜头",
|
||
"- Canvas Size": "- 画布尺寸",
|
||
"- Fullscreen mode": " - 全萤幕模式",
|
||
"- Joints and Limbs": "- 关节和四肢",
|
||
"- Move canvas": " - 移动画布",
|
||
"- or -": "- 或 -",
|
||
"- Others": "- 其他",
|
||
"- Reset zoom": "- 重设缩放",
|
||
"- Zoom canvas": " - 缩放画布",
|
||
"----deprecated----": "----以下内容在webUI新版本已移除----",
|
||
"----not work----": "----以下是 结束标誌----",
|
||
"-->": "→",
|
||
"-1 means that it is calculated automatically. If both are -1, the size will be the same as the source size.": "-1 意味着自动计算。如果宽高都是 -1，则将与源影片尺寸相同。",
|
||
"-> Replace tag, ..": "-> 取代标籤, ..",
|
||
". An easy way to do it is selecting random settings, a high batch count and then checking the keywords on the results you like.": "。一个简单的方法就是选择随机设定，并设定较高的批量次数，然後在你喜欢的结果中检视关键词。",
|
||
". Visit": " 分隔。检视",
|
||
". You can also join this": ". 你同样可以加入这个",
|
||
"/path/to/images or /path/to/images/**/*": "/path/to/images 或 /path/to/images/**/*",
|
||
"/path/to/images/* or /path/to/images/**/*": "/path/to/images/* 或 /path/to/images/**/*",
|
||
"1. Add URL and retrieve Model Info": "1. 新增网址并检索模型资讯",
|
||
"1. Create your wildcard library by copying a collection using the dropdown below.": "1. 使用下方的下拉选单选择一个选集，并按下複製选集来创建您的万用字源库。",
|
||
"1. Get Model Info by Civitai Url": "从 Civitai 网址拉取模型资讯",
|
||
"1. Get your key at": "1. 访问後面的网址获得你的 Key ",
|
||
"1. Go to img2img tab": "1. 前往 图生图 页籤",
|
||
"1. The tags common to all displayed images are shown in comma separated style.": "1. 所有显示图像的共同标籤要用逗号分隔的样式显示。\n\n ",
|
||
"1st": "单元 1",
|
||
"1st and last digit must be 0 and values should be between 0 and 1. ex:'0, 0.01, 0'": "第1和最後一个数字必须是 0，并且值应该在 0 和 1 之间。 ex：'0, 0.01, 0",
|
||
"1st and last digit must be 1. ex:'1, 2, 1'": "第一个和最後一个数字必须是 1。例：'1, 2, 1'",
|
||
"1x_PixelSharpen_100000": "1x_PixelSharpen_100000 (像素 去模糊)",
|
||
"2. Click on any of the files that appear in the tree to edit them.": "2. 点击上方选项中出现的档案进行编辑。",
|
||
"2. Pick Subfolder and Model Version": "2. 选择子目录和模型版本",
|
||
"2. Refresh checkpoint list after authentication to get available checkpoints": "2. 完成认证後刷新 CheckPoint 列表获得可用的 CheckPoint",
|
||
"2. Select [ebsynth utility] in the script combo box": "2. 在脚本框裡选择 [ebsynth utility]",
|
||
"2. When changes are applied, all tags in each displayed images are replaced.": "当套用更改时，所有所显示的图像的标籤将会被取代",
|
||
"2D & 3D operator to move canvas left/right in pixels per frame": "以每帧多少像素为单位向左/向右移动画布的 2D&3D 操作",
|
||
"2D & 3D operator to move canvas up/down in pixels per frame": "以每帧多少像素为单位向上/向下移动画布的 2D&3D 操作",
|
||
"2D and 3D settings": "2D 与 3D 设定",
|
||
"2D operator that scales the canvas size, multiplicatively. [static = 1.0]": "缩放画布大小的2D运算子，以倍数缩放。[static=1.0]",
|
||
"2D operator to rotate canvas clockwise/anticlockwise in degrees per frame": "2D 操作器对每帧动画顺时针/逆时针旋转所指定的角度",
|
||
"2D or 3D animation_mode": " 2D 或 3D 动画模式中",
|
||
"2nd": "单元 2",
|
||
"2xHFA2kShallowESRGAN": "2xHFA2kShallowESRGAN (动画 降躁 锐化)",
|
||
"2xHFA2kSwinIR-S": "2xHFA2kSwinIR-S (动画 降躁 锐化)",
|
||
"3. Download Model": "下载模型",
|
||
"3. Fill in the \"Project directory\" field with ": "3. 在“工程目录”框中填写 ",
|
||
"3. Generate without making your GPU go brrrr!": "3. 生成时不会让你的 GPU 發出咆哮！",
|
||
"3. If you change some tags into blank, they will be erased.": "如果你更改某些标籤到空白處，他们将会被移除",
|
||
"3. Use the wildcard in your script by typing the name of the file or copying the text from the Wildcards file text box": "3. 在提示词中使用万用字元，输入档案名称或从万用字元档案档案编辑器中複製文字。",
|
||
"3D Fov settings:": "3D 视野设定:",
|
||
"3d glb": "3D (GLB 格式)",
|
||
"3D Mesh": "3D 网格",
|
||
"3D Model": "3D 模型",
|
||
"3D Model Loader": "3D 模型载入器",
|
||
"3D Model&Pose Loader": "3D 模型与姿势载入器",
|
||
"3D Openpose": "3D 骨架模型编辑 （3D Openpose）",
|
||
"3D operator to move canvas towards/away from view [speed set by FOV]": "将画布靠近/远离镜头的 3D 操作 [速度由可视範围设定决定]",
|
||
"3D operator to pan canvas left/right in degrees per frame": "以每帧为单位向左/向右偏移画布的 3D 操作",
|
||
"3D operator to roll canvas clockwise/anticlockwise": "顺时针/逆时针滚动画布的 3D 操作",
|
||
"3D operator to tilt canvas up/down in degrees per frame": "以每帧为单位向上/向下倾斜画布的 3D 操作",
|
||
"3D rendering": "3D 渲染中",
|
||
"3D Rendering": "3D 渲染中",
|
||
"3D settings": "3D 设定",
|
||
"3rd": "单元 3",
|
||
"4. If you add some tags to the end, they will be added to the end/beginning of the text file.": "如果你将一些标籤新增至末端，它们将被新增在文本档案的开始/末尾。",
|
||
"4. Select in the \"Mask Mode(Override img2img Mask mode)\" field with ": "4. 在“遮罩模式（覆盖图生图的遮罩模式）”中选择 ",
|
||
"4th": "单元 4",
|
||
"4x_DWTP_descreenton_H_esrgan": "4x_DWTP_descreenton_H_esrgan (漫画 去除网点)",
|
||
"4x_DWTP_DS_DAT2_V3": "4x_DWTP_DS_DAT2_V3 (黑白 漫画 文字)",
|
||
"4x_DWTP_DS_dat2_v3_2": "4x_DWTP_DS_dat2_v3_2 (黑白 漫画 文字)",
|
||
"4x_escale_100000_G": "4x_escale_100000_G (动漫)",
|
||
"4x_IllustrationJaNai_V1_DAT2_190k": "4x_IllustrationJaNai_V1_DAT2_190k (彩色 插画 漫画封面 修复)",
|
||
"4x_IllustrationJaNai_V1_ESRGAN_135k": "4x_IllustrationJaNai_V1_ESRGAN_135k (彩色 插画 漫画封面 修复)",
|
||
"4x_NMKD-UltraYandere_300k": "4x_NMKD-UltraYandere_300k (动漫)",
|
||
"4x_PixelPerfectV4_137000_G": "4x_PixelPerfectV4_137000_G (像素 转高清)",
|
||
"4x_SmolFace_200k": "4x_SmolFace_200k (像素 转高清)",
|
||
"4x_SmolFace_clean": "4x_SmolFace_clean (像素 转高清)",
|
||
"4xFaceUpDAT": "4xFaceUpDAT (写实 脸)",
|
||
"4xFaceUpSharpDAT": "4xFaceUpSharpDAT (写实 脸 降躁 锐化)",
|
||
"4xFaceUpSharpLDAT": "4xFaceUpSharpLDAT (写实 脸 降躁 锐化 适用於低品质图像)",
|
||
"4xFFHQDAT": "4xFFHQDAT (写实 脸 降躁)",
|
||
"4xFFHQLDAT": "4xFFHQLDAT (写实 脸 降躁 适用於低品质图像)",
|
||
"4xFSDedither_Manga": "4xFSDedither_Manga (像素 漫画)",
|
||
"4xLSDIR": "4xLSDIR (写实 修复)",
|
||
"4xLSDIRplus": "4xLSDIRplus (写实 修复)",
|
||
"5 times instead of 4.": "5 次而非 4 次。",
|
||
"5. Changes are not applied to the text files until the \"Save all changes\" button is pressed.": "在按下储存所有更改的按钮之前，所有在文本档案中所做的更改将不会生效",
|
||
"5. I recommend to fill in the \"Width\" field with ": "5. 建议将“宽度”设定为 ",
|
||
"5th": "单元 5",
|
||
"6. I recommend to fill in the \"Height\" field with ": "6. 建议将“高度”设定为 ",
|
||
"6th": "单元 6",
|
||
"7. I recommend to fill in the \"Denoising strength\" field with lower than 0.35": "7. 建议将“重绘幅度”设定为小於0.35",
|
||
"7th": "单元 7",
|
||
"8. Fill in the remaining configuration fields of img2img. No image and mask settings are required.": "8. 填写图生图其他的设定。不需要设定图像和遮罩。",
|
||
"8th": "单元 8",
|
||
"8x_NMKD-Typescale_175k": "8x_NMKD-Typescale_175k (文字)",
|
||
"9. Drop any image onto the img2img main screen. This is necessary to avoid errors, but does not affect the results of img2img.": "9. 拖拽任意图像到图生图主视窗。这样做能有效避免错误，但不会影响图生图的结果。",
|
||
"9th": "单元 9",
|
||
"10. Generate": "10. 生成",
|
||
"10th": "单元 10",
|
||
"50s Art": "50年代艺术风格",
|
||
"60s Art": "60 年代艺术风格",
|
||
"70s Art": "70 年代艺术风格",
|
||
"80s Art": "80 年代艺术风格",
|
||
"90 Degree Rotation": "90 度旋转",
|
||
"180 Degree Rotation": "180 度旋转",
|
||
"360 Panorama to 3D": "360°全景图转 3D",
|
||
"512x Model": "512x 模型",
|
||
": a dictionary of the shortcode's keyword arguments.": "简码关键字参数的字典",
|
||
": Allow use of sub seeds to 'smoothly' change from one seed to the next. Only makes sense to use if you manually have some seeds set in the keyframes.": "允许使用子种子（sub seeds）来实作从一个种子到下一个种子的平滑过渡。只有在关键帧中手动设定了种子时才有用。",
|
||
": Original extension": ": 原始副档名",
|
||
": Original extension\nAvailable algorithms:": ": 原始副档名\n可用演算法: ",
|
||
": Original filename without extension": ": 没有副档名的原始档名",
|
||
": Output extension (has no dot)": "输出副档名 (没有 '.' 点)",
|
||
"<--": "←",
|
||
"<create new>": "<新增>",
|
||
"= '": " = ' ",
|
||
"@@/^control_v1p_sd15_brightness (\\[\\w+\\])$/": "control_v1p_sd15_brightness $1 (光效 文字)",
|
||
"@@/^control_v1p_sd15_illumination (\\[\\w+\\])$/": "control_v1p_sd15_illumination $1 (光影构图)",
|
||
"@@/^control_v1p_sd15_qrcode (\\[\\w+\\])$/": "control_v1p_sd15_qrcode $1 (QR Code)",
|
||
"@@/^control_v1p_sd15_qrcode_monster (\\[\\w+\\])$/": "control_v1p_sd15_qrcode_monster $1 (Controlnet QR Code Monster v1 For SD-1.5)",
|
||
"@@/^control_v1p_sd15_qrcode_monster_v2 (\\[\\w+\\])$/": "control_v1p_sd15_qrcode_monster_v2 $1 (Controlnet QR Code Monster v2 For SD-1.5)",
|
||
"@@/^controlnetQRCodeMonster_v2Ckpt (\\[\\w+\\])$/": "controlnetQRCodeMonster_v2Ckpt $1 (Controlnet QR Code Monster v2 For SD-1.5 ckpt)",
|
||
"@@/^ip-adapter-faceid-plusv2_sd15 (\\[\\w+\\])$/": "ip-adapter-faceid-plusv2_sd15 $1 (IP-Adapter-FaceID)",
|
||
"@@/^ip-adapter-faceid-portrait-v11_sd15 (\\[\\w+\\])$/": "ip-adapter-faceid-portrait-v11_sd15 $1 (IP-Adapter-FaceID Portrait 肖像照)",
|
||
"@@/^ip-adapter-plus-face_sd15 (\\[\\w+\\])$/": "IP-Adapter Face $1 (参考脸与髮型)",
|
||
"@@/^ip-adapter-plus_sd15 (\\[\\w+\\])$/": "IP-Adapter Plus $1 (参考整体风格 例如服装)",
|
||
"@@/^ip-adapter_sd15_light (\\[\\w+\\])$/": "IP-Adapter light $1 (提示词优先)",
|
||
"@@/^outfitToOutfit_v20 (\\[\\w+\\])$/": "outfitToOutfit_v20 $1 (服装 更改人物服装)",
|
||
"@@/^photomaker-v1 (\\[\\w+\\])$/": "photomaker-v1 $1 (PhotoMaker 个性化人像图像)",
|
||
"@@/^t2iadapter_zoedepth_(w+) (\\[\\w+\\])$/": "t2iadapter_zoedepth_$1 $2 (ZoeDepth 结合相对和绝对深度)",
|
||
"[Batch Loopback] Automatically send generated images to this ControlNet unit in batch generation": "[批量回送] 在批量生成中自动将生成後的图像發送到此 ControlNet 单元",
|
||
"[color-matcher]": "颜色匹配器",
|
||
"[ControlNet] Enabled": "[ControlNet] 启用",
|
||
"[ControlNet] Guidance End": "[ControlNet] 引导结束",
|
||
"[ControlNet] Guidance Start": "[ControlNet] 引导开始",
|
||
"[ControlNet] Guidance Strength": "[ControlNet] 引导强度",
|
||
"[ControlNet] Model": "[ControlNet] 模型",
|
||
"[ControlNet] Pre Resolution": "[ControlNet] 解析度",
|
||
"[ControlNet] Pre Threshold A": "[ControlNet] 阈值 A",
|
||
"[ControlNet] Pre Threshold B": "[ControlNet] 阈值 B",
|
||
"[ControlNet] Preprocessor": "[ControlNet] 预處理器",
|
||
"[ControlNet] Resize Mode": "[ControlNet] 缩放模式",
|
||
"[ControlNet] Weight": "[ControlNet] 权重",
|
||
"[Ebsynth Utility]->[configuration]->[stage 2]->[Threshold of delta frame edge]": "[Ebsynth Utility]->[延伸模组设定]->[步骤 2]->[关键帧间隔差异阈值]",
|
||
"[here]": "[这裡]",
|
||
"[Loopback] Automatically send generated images to this ControlNet unit": "[Loopback] 自动将生成的图像發送回此 ControlNet",
|
||
"[NPW] Weight": "[NPW] 权重",
|
||
"[StyleAlign] Align image style in the batch.": "[风格对齐] 在批次中对齐图像风格",
|
||
"[this]": "[这裡]",
|
||
"[transparent-background]": "[透明背景]",
|
||
"] Do not use this option if you have made changes with the metadata editor without backing up your data!!": "] 若用元数据编辑器修改过元数据且未做备份的请勿使用此选项!!",
|
||
"`animation_mode: None` batches on list of *prompts*. (Batch mode disabled atm, only animation_prompts are working)": "`animation_mode: None` *提示词*列表中的批次。 （批處理模式暂时停用，只有 animation_prompts 有效）",
|
||
"A basic img2img script that will dump frames and build a video file. Suitable for creating interesting zoom-in warping movies. This is intended to be a versatile toolset to help you automate some img2img tasks.": "一个简单的图生图脚本，将输出帧并建立视讯档案。适合製作有趣的缩放曲折电影。这是一个多用途的工具组，可帮助您自动化一些图生图任务。",
|
||
"a bit better, but it conflicted with less-than, greater-than logic operators. This means that older templates may not work in v2.0.0, which is a bit of a pain. I only make breaking changes like this when I feel it's worthwhile.": "略优一点，但它与小於 (<)、大於 (>) 逻辑运算符有衝突，这意味着旧的模板可能无法在 v2.0.0 中使用，这有点麻烦。只有在值得这样做的时候，才会进行破坏性的改变。",
|
||
"A custom name to use when saving .ckpt and .pt files. Subdirectories will also be named this.": "一个在储存 .ckpt 和 .pt 档案时使用的自订名称。子目录也会以此命名。",
|
||
"A directory on the same machine where the server is running.": "伺服器主机上某一目录",
|
||
"A directory or a file": "一个档案或目录",
|
||
"A directory or a file. Keep this empty to use the alpha channel of image as mask": "填入目录或档案。保持为空以使用图像的alpha通道作为遮罩",
|
||
"A file on the same machine where the server is running.": "伺服器所在主机上的档案",
|
||
"A generic prompt used to generate a sample image to verify model fidelity.": "用於产生样本图像以验证模型保真度的通用提示。",
|
||
"A higher temperature will produce more diverse results, but with a higher risk of less coherent text": "较高的 Temperature 值会产生更加多样化的结果，但输出文本不连贯的风险也较高",
|
||
"A integrated translator for translating prompts to English using Deepl or Baidu.": "一个使用 Deepl 或 Baidu 翻译提示至英文的统整翻译器。",
|
||
"A merger of the two checkpoints will be generated in your": "合併後的模型将储存在您的",
|
||
"A negative prompt for the generic sample image.": "通用图像的反向提示词。",
|
||
"A negative prompt to use when generating class images. Can be empty.": "生成类别图像时使用的反向提示词。可留空。",
|
||
"A negative prompt to use when generating preview images.": "用於生成预览图像的反向提示词。",
|
||
"A prompt describing the subject. Use [Filewords] to parse image filename/.txt to insert existing prompt here.": "描述主题的提示词。使用 [Filewords] 解析图像档名/.txt 文本档案来在此處插入现有提示词。",
|
||
"A prompt for generating classification/regularization images. See the readme for more info.": "生成分类/正则化图像用的提示词。详细资讯请查阅 readme 。",
|
||
"A prompt used to generate a 'baseline' image that will be created with other samples to verify model fidelity.": "用於生成基准图像的提示词。会和其他样本一同生成来检验模型的保真度。",
|
||
"a random seed will be used on each frame of the animation": "种子会随机生成并被应用於动画中的每一帧",
|
||
"A range can be provided:": "项数可以有範围",
|
||
"A script for img2img that extract a gif frame by frame for img2img generation and recombine them back into an animated gif": "图生图的脚本，逐帧提取图生图以生成 gif，并将它们重新组合成动画gif",
|
||
"A setting of 1 will cause every frame to receive diffusion in the sequence of image outputs. A setting of 2 will only diffuse on every other frame, yet motion will still be in effect. The output of images during the cadence sequence will be automatically blended, additively and saved to the specified drive. This may improve the illusion of coherence in some workflows as the content and context of an image will not change or diffuse during frames that were skipped. Higher values of 4-8 cadence will skip over a larger amount of frames and only diffuse the “Nth” frame as set by the diffusion_cadence value. This may produce more continuity in an animation, at the cost of little opportunity to add more diffused content. In extreme examples, motion within a frame will fail to produce diverse prompt context, and the space will be filled with lines or approximations of content - resulting in unexpected animation patterns and artifacts. Video Input & Interpolation modes are not affected by diffusion_cadence.": "设定为 1 将使每个帧在图像输出序列中生成图像。设定为 2 将每隔一帧进行图像生成，但运动仍然有效。间隔序列期间的图像输出将自动混合、新增并储存到指定驱动器。这可能会改善某些工作流中的一致性错觉，因为图像的内容和上下文在跳过的帧期间不会改变或扩散。更高的间隔值，例如4-8，将跳过更多的帧，并仅生成由生成间隔值设定的“第N”帧。这可能会在动画中产生更多的连续性，但幾乎没有机会新增更多的扩散内容。在极端的例子中，帧内的运动将无法产生不同的提示上下文，并且空间将充满缐条或近似的内容，从而导致意外的动画模式和伪影。影片输入和插值模式不受生成间隔值的影响。",
|
||
"A tab with the full openOutpaint UI. Run with the --api flag.": "具有完整 openOutpaint UI 的页籤。使用 --api 标誌执行。",
|
||
"A value that determines the output of random number generator - if you create an image with same parameters and seed as another image, you'll get the same result": "一个固定随机数生成器输出的值 — 以相同参数和随机种子生成的图像会得到相同的结果\n🎲 将随机种子设定为负数（预设-1），则每次都会使用一个非负数的随机整数\n♻️ 重用上一次使用的随机种子，如果想要固定输出结果的话这很有用",
|
||
"A video2video script that tries to improve on the temporal consistency and flexibility of normal vid2vid.": "一个尝试改善普通 vid2vid 的时间一致性和灵活性的 video2video 指令码。",
|
||
"A weighted sum will be used for interpolation. Requires two models; A and B. The result is calculated as A * (1 - M) + B * M": "插值将使用加权和。需要两个模型；A和B。结果为A *（1-M）+ B * M计算。",
|
||
"A, B or C": "A, B 或 C",
|
||
"a-z": "字母顺序：从a到z",
|
||
"A1111 txt2img (Euler a)": "AUTOMATIC1111 webui 文生图 (Euler a 採样方法)",
|
||
"ABG_extension": "ABG_延伸模组",
|
||
"About": "关於",
|
||
"Above": "上方",
|
||
"Abs": "绝对值",
|
||
"abs. path or url to audio file": "音讯档案的绝对路径或 URL",
|
||
"Absolute": "绝对",
|
||
"abstract": "abstract (抽象艺术)",
|
||
"Abstract": "Abstract (抽象)",
|
||
"Abstract Art": "抽象艺术",
|
||
"Abstract Expressionism": "抽象表现主义",
|
||
"Abstract Illusionism": "抽象幻想主义",
|
||
"Academism": "学院主义（学院派）",
|
||
"accelerate": "加速",
|
||
"Accelerate with OpenVINO": "Accelerate with OpenVINO (OpenVINO 加速)",
|
||
"Accent": "强调色",
|
||
"Accent color": "强调色",
|
||
"Accent Generate Button": "强调生成按钮",
|
||
"Access results in ‘Open results’.": "点击“开启最终效果图”获取增强後的图像",
|
||
"Acclaimed": "广受好评",
|
||
"According to Live preview subject setting": "实时预览主体设定",
|
||
"according to the mask opacity.": ", 根据遮罩不透明度",
|
||
"Accumulation steps": "累加步数",
|
||
"Action": "动作",
|
||
"Action for existing captions": "对已有标籤的操作",
|
||
"Action on existing caption": "对已有标註的操作",
|
||
"Actions": "动作",
|
||
"Activate 'Show results in WebUI' checkbox to see results in the WebUI at the end (not recommended when processing a large number of images)": "启用“在 WebUI 中显示结果”複选框，以在结束时在 WebUI 上检视结果（處理大量图像时不建议使用）",
|
||
"Activate Selected Script": "启用选定脚本",
|
||
"Activate the 'Masks only' checkbox to see how many faces do your current settings detect without generating SD image. (check console)": "启用“仅遮罩”选项，即可不生图就能看到当前设定能检测到多少张脸。（请在控制台检视）",
|
||
"Activation keywords, comma-separated": "触發提示词，以逗号分隔",
|
||
"Activation text": "启动文字",
|
||
"Active": "启用",
|
||
"Active in img2img": "在图生图启用",
|
||
"Active in img2img (Requires restart)": "在图生图中启用（需要储存设定并重新启动）",
|
||
"Active in negative prompts": "在反向提示词输入框启用",
|
||
"Active in negative prompts (Requires restart)": "在反向提示词中启用（需要储存设定并重新启动）",
|
||
"Active in third party textboxes": "在第三方扩展文本输入框启用",
|
||
"Active in third party textboxes [Dataset Tag Editor] (Requires restart)": "在第三方扩充功能「数据集标记编辑器」的文字方块中启用（需要储存设定并重新启动）",
|
||
"Active in third party textboxes [Dataset Tag Editor] [Image Browser] [Tagger] [Multidiffusion Upscaler] (Requires restart)": "在第三方文本框中启用标籤自动补全 [数据集标籤编辑器 (Dataset Tag Editor)] [图库浏览器] [WD1.4标籤器(Tagger)] [Multidiffusion 超解析度] (需重启)",
|
||
"Active in txt2img": "在文生图启用",
|
||
"Active in txt2img (Requires restart)": "在文生图中启用（需要储存设定并重新启动）",
|
||
"Active Layer Only": "仅發送图层",
|
||
"Active: peak amount of video memory used during generation (excluding cached data)": "活动：生成过程中使用的显存峰值（不含缓存数据）",
|
||
"actual FPS": "实际帧率（帧每秒）",
|
||
"Actual FPS": "实际帧率（帧每秒）",
|
||
"Actual total duration": "实际总时长",
|
||
"Actual total frames": "实际总帧数",
|
||
"Adam Epsilon": "Adam Epsilon (替代 0 的常数，防止直接除以 0)",
|
||
"Adam Weight Decay": "Adam 权重衰减 (Weight Decay)",
|
||
"AdamW Weight Decay": "AdamW 权重衰减 (Weight Decay)",
|
||
"AdamW weight decay parameter": "AdamW 权重衰减参数 (Weight Decay)",
|
||
"Adaptive (Gaussian)": "自适应（高斯）",
|
||
"Adaptive (Mean)": "自适应（平均值）",
|
||
"Adaptive change:": "适应性变换：",
|
||
"Adaptive Change:": "适应性变换",
|
||
"add": "新增",
|
||
"Add": "加入",
|
||
"Add a '/' to the beginning of directory buttons": "将 '/' 新增到目录按钮的开始處",
|
||
"Add a button to convert the prompts used in NovelAI for use in the WebUI. In addition, add a button that allows you to recall a previously used prompt.": "加入一个按钮以将 NovelAI 中使用的提示词转换为在 WebUI 中使用。此外，加入一个按钮，让你可以调用以前使用过的提示词",
|
||
"Add a prompt prefix, suffix and the negative prompt in the respective fields. They will be automatically added during processing.": "在相应的字段中新增提示词前缀、後缀和反向提示词。它们会在處理过程中被自动新增。",
|
||
"Add a random artist to the prompt.": "随机新增一个艺术家到提示词中",
|
||
"Add a second progress bar to the console that shows progress for an entire job.": "向控制台加入第二个进度列，显示整个作业的进度",
|
||
"Add a spaces after comma": "逗号後新增一个空格",
|
||
"Add additional prompting to the prefix, suffix and negative prompt in this screen. The actual prompt fields are ignored.": "在此场景下新增附加提示词到前缀、後缀、反向提示词。实际的提示词段会被忽略。",
|
||
"Add additional prompts to the head": "在起始新增额外的提示词",
|
||
"Add ALL Displayed": "新增所有当前显示的图像",
|
||
"Add alternatives to the default tunneling methods. (including cloudflared)": "加入使用预设 tunneling 方法以外的替代方法（包括 cloudflared）",
|
||
"add APIs": "新增 API",
|
||
"add audio to video from file/url or init video": "从档案/网址或初始影片中提取音讯以完成新增",
|
||
"Add background image": "新增背景图像",
|
||
"Add Background image": "加入背景图像",
|
||
"Add Background Image": "新增背景图像",
|
||
"Add Blur": "新增模糊",
|
||
"Add CLIP results to Caption": "将 CLIP 结果加入描述",
|
||
"Add custom keyword(trigger word) mapping for current model. Custom mappings are saved to extensions/model-keyword/custom-mappings.txt": "为当前模型新增自订关键词（触發词）映射。自订映射将储存到extensions/model-keyword/custom-mappings.txt",
|
||
"Add custom keyword(trigger word) mapping for selected LORA model.": "为选定的 LORA 模型新增自订关键词（触發词）映射",
|
||
"Add Custom Mappings": "新增自订映射",
|
||
"Add DeepDanbooru Tags to Caption": "将 DeepDanbooru 标籤新增到描述文本中",
|
||
"Add Detail": "新增细节",
|
||
"Add difference": "加入差分",
|
||
"Add difference:A+(B-C)*alpha": "差额叠加: A+(B-C)*α",
|
||
"Add emphasis to a randomly selected keyword in the prompt.": "在提示词中随机选择一个关键字加上强调符",
|
||
"Add extended info (seed, prompt) to filename when saving grid": "储存宫格图时，将延伸模组资讯（随机种子，提示词）加入到档案名",
|
||
"Add hypernetwork to prompt": "将超网路加入至提示词",
|
||
"Add hypernetwork to prompt: refresh": "将 hypernetwork 新增到提示词: 刷新",
|
||
"Add image number to grid": "将图像编号新增到网格中",
|
||
"Add inpaint batch mask directory to enable inpaint batch processing.": "新增修补批次遮罩目录以启用批次處理修补功能。",
|
||
"Add last frame to keyframes": "设定最後一帧为关键帧",
|
||
"Add layer normalization": "加入层归一化",
|
||
"Add Lora hashes to infotext": "新增 Lora 的杂凑值文本到图像资讯中",
|
||
"Add Lora to prompt": "将 LoRA 新增到提示词",
|
||
"Add LyCORIS to prompt": "将 LyCORIS 新增到提示词",
|
||
"Add mask by sketch": "根据草图新增遮罩",
|
||
"Add merge recipe metadata": "新增融合配方资讯",
|
||
"Add model hash to generation information": "将模型的杂凑值加入到生成资讯",
|
||
"Add model hash to infotext": "新增模型杂凑值到生成资讯",
|
||
"Add model name to generation information": "将模型名称加入到生成资讯",
|
||
"Add model name to infotext": "新增模型名到生成资讯",
|
||
"Add N to seed when repeating": "重複时在种子数上加 N",
|
||
"Add network to prompt": "将 Lora 等模型新增到提示词",
|
||
"Add network to prompt: refresh": "将 Lora 等模型新增到提示词: 刷新",
|
||
"Add new prompts": "新增新提示词",
|
||
"Add Noise": "增加噪点",
|
||
"Add number suffix": "新增数字後缀",
|
||
"Add number to filename when saving": "储存的时候在档案名裡加入数字",
|
||
"Add program version to generation information": "将项目版本新增到生成资讯",
|
||
"Add program version to infotext": "新增项目版本到生成资讯",
|
||
"add prompt by image": "按图像资讯新增提示词",
|
||
"Add Reverse Frame": "新增反转帧",
|
||
"Add selection [Enter]": "新增选择 [输入]",
|
||
"Add Smart-Steps minimum step and ToMe merging ratio value to generation information.": "将最佳化迭代步数和TOME合併比率数值资讯新增到图像生成资讯中",
|
||
"Add soundtrack": "新增音轨",
|
||
"Add Textual Inversion hashes to infotext": "将 Textual Inversion 杂凑值新增到生成资讯",
|
||
"Add the image's number to its picture in the grid (when 'Add number to filename' is on)": "为网格中的图像新增编号（需开启“新增编号到档名”）",
|
||
"Add the image's number to its picture in the grid.": "将图像的编号新增到网格中的图像中。",
|
||
"Add to / replace in saved directories": "加入至或取代已储存的目录",
|
||
"Add to Sequence X": "新增到 X 轴",
|
||
"Add to Sequence Y": "新增到 Y 轴",
|
||
"Add trigger words to prompt": "一键新增本模型的触發词到提示词输入框",
|
||
"Add user name to generation information when authenticated": "将已认证的用户名新增到生成资讯",
|
||
"Add user name to infotext when authenticated": "新增已认证的用户名到生成资讯",
|
||
"Add VAE hash to infotext": "新增 VAE 杂凑值到生成资讯",
|
||
"Add VAE name to infotext": "新增 VAE 名称到生成资讯",
|
||
"Add Vectorscope CC parameters to generation information": "向生成资讯中新增 Vectorscope CC 参数",
|
||
"Add WD14 Tags to Caption": "将 WD14 标籤新增到到描述文本中",
|
||
"Add weights to Sequence X": "将权重新增到 X 序列中",
|
||
"Add/Remove...": "新增/删除...",
|
||
"add_preview_prompt_button": "新增预览提示词按钮",
|
||
"add_trigger_words_button": "新增触發词按钮",
|
||
"Added": "已新增",
|
||
"Additional cli arguments to pass to ComfyUI (requires reload UI. Do NOT prepend --comfyui-, these are directly forwarded to comfyui)": "ComfyUI 附加的额外启动参数 (需要重载 UI。请勿在此新增 --comfyui- 前缀)",
|
||
"Additional components": "附加组件",
|
||
"Additional description": "附加说明",
|
||
"Additional Generation Info": "附加生成资讯",
|
||
"Additional Networks": "附加网路（LoRA扩充功能）",
|
||
"Additional options": "附加选项",
|
||
"Additional tags (comma split)": "附加标籤 (逗号分隔)",
|
||
"Additional tags (split by comma)": "附加标籤 (逗号分隔)",
|
||
"Additionally, I would like to overhaul the extension UI as well as the github docs. Both of these were hastily thrown together and could benefit from a lot of polish. You can expect improvements in these areas over the next few updates!": "另外，我还想仔细修改下extension UI以及 GitHub 文档。它们都是匆忙製作的，有待进一步完善。请期待在接下来幾次更新中这些方面的改进！",
|
||
"Additionally, you can now specify": "此外，您现在可以指定",
|
||
"AddNet Model 1": "[附加网络] 模型 1️⃣",
|
||
"AddNet Model 2": "[附加网路] 模型 2️⃣",
|
||
"AddNet Model 3": "[附加网路] 模型 3️⃣",
|
||
"AddNet Model 4": "[附加网路] 模型 4️⃣",
|
||
"AddNet Model 5": "[附加网路] 模型 5️⃣",
|
||
"AddNet TEnc Weight 1": "[附加网路] 文字编码器权重 1️⃣",
|
||
"AddNet TEnc Weight 2": "[附加网路] 文字编码器权重 2️⃣",
|
||
"AddNet TEnc Weight 3": "[附加网路] 文字编码器权重 3️⃣",
|
||
"AddNet TEnc Weight 4": "[附加网路] 文字编码器权重 4️⃣",
|
||
"AddNet TEnc Weight 5": "[附加网路] 文字编码器权重 5️⃣",
|
||
"AddNet UNet Weight 1": "[附加网路] UNet 权重 1️⃣",
|
||
"AddNet UNet Weight 2": "[附加网路] UNet 权重 2️⃣",
|
||
"AddNet UNet Weight 3": "[附加网路] UNet 权重 3️⃣",
|
||
"AddNet UNet Weight 4": "[附加网路] UNet 权重 4️⃣",
|
||
"AddNet UNet Weight 5": "[附加网路] UNet 权重 5️⃣",
|
||
"AddNet Weight 1": "[附加网路] 权重 1️⃣",
|
||
"AddNet Weight 2": "[附加网路] 权重 2️⃣",
|
||
"AddNet Weight 3": "[附加网路] 权重 3️⃣",
|
||
"AddNet Weight 4": "[附加网路] 权重 4️⃣",
|
||
"AddNet Weight 5": "[附加网路] 权重 5️⃣",
|
||
"Address": "地址",
|
||
"Address of the ComfyUI server as seen from the webui. Only used by the extension to load the ComfyUI iframe (requires reload UI)": "ComfyUI 前端伺服器访问地址，仅用於嵌套 ComfyUI 网页框架 (需要重载 UI)",
|
||
"Adds a configurable dropdown to allow you to change UI preset settings in the txt2img and img2img tabs.": "在文生图和图生图页面中新增可设定下拉选单，以允许您更改 UI 预设设定。",
|
||
"Adds a tab for doing img2img editing with the instruct-pix2pix model. Note: No longer required. Author has integrated code to webui, use in img2img.": "新增一个页籤，用於使用instruction-pix2pix模型进行图生图编辑。註：不再需要，作者已将程式码整合到webui，在图生图中使用。",
|
||
"Adds a tab that lets you preview how CLIP model would tokenize your text.": "新增一个页籤让你能够预览 CLIP 模型如何对你的文本进行标记拆分",
|
||
"Adds a tab to the webui that allows the user to automatically extract keyframes from video, and manually extract 512x512 crops of those frames for use in model training.": "向 webui 加入一个页籤，允许使用者自动从影片中提取关键帧，并手动裁剪 512x512 大小以用於模型训练",
|
||
"Adds customizable dynamic thresholding to allow high CFG Scale values without the burning / 'pop art' effect.": "加入可自订的动态阈值，以允许高 CFG Scale 值，而不会有烧焦或「流行艺术」效果。",
|
||
"Adds image aspect ratio selector buttons.": "新增图像长宽比选择按钮。",
|
||
"Adds prompt-travel and shift-attention-like interpolations (see exts), but during/within the sampling steps. Always-on + works w/ existing prompt-editing syntax. Various interpolation modes. See their wiki for more info.": "加入提示旅行和类似位移注意力的插值（请参阅 exts），但在採样步骤中进行。始终启用 + 可与现有提示编辑语法一起使用。各种插值模式。有关更多资讯，请参阅其 wiki。",
|
||
"Adds the ability to apply multiple hypernetworks at once. Apply multiple hypernetworks sequentially, with different weights.": "增加同时应用多个超网络的能力。连续应用多个超网络，具有不同的权重。",
|
||
"Adds various custom themes": "新增多种自定义主题。",
|
||
"ADetailer CFG scale": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 2nd": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 3rd": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 4th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 5th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 6th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 7th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 8th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 9th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 10th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer checkpoint": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 2nd": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 3rd": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 4th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 5th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 6th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 7th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 8th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 9th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer checkpoint 10th": "After Detailer 使用的 SD 模型",
|
||
"ADetailer CLIP skip": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 2nd": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 3rd": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 4th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 5th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 6th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 7th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 8th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 9th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 10th": "After Detailer CLIP 终止层数",
|
||
"ADetailer confidence threshold %": "置信阈值 (单位: %)",
|
||
"ADetailer denoising strength": "重绘幅度",
|
||
"ADetailer erosion (-) / dilation (+)": "图像腐蚀 (-) / 图像膨胀 (+)",
|
||
"ADetailer mask blur": "重绘遮罩边缘模糊度",
|
||
"ADetailer model": "After Detailer 模型",
|
||
"ADetailer model 2nd": "After Detailer 模型",
|
||
"ADetailer model 3rd": "After Detailer 模型",
|
||
"ADetailer model 4th": "After Detailer 模型",
|
||
"ADetailer model 5th": "After Detailer 模型",
|
||
"ADetailer model 6th": "After Detailer 模型",
|
||
"ADetailer model 7th": "After Detailer 模型",
|
||
"ADetailer model 8th": "After Detailer 模型",
|
||
"ADetailer model 9th": "After Detailer 模型",
|
||
"ADetailer model 10th": "After Detailer 模型",
|
||
"ADetailer negative prompt": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer negative prompt 2nd": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 2nd\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer negative prompt 3rd": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 3rd\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer negative prompt 4th": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 4th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer negative prompt 5th": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 5th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer negative prompt 6th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer negative prompt 7th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer negative prompt 8th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer negative prompt 9th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer negative prompt 10th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用预设的反向提示词",
|
||
"ADetailer prompt": "After Detailer 正向提示词",
|
||
"ADetailer prompt\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer prompt 2nd": "After Detailer 正向提示词",
|
||
"ADetailer prompt 2nd\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer prompt 3rd": "After Detailer 正向提示词",
|
||
"ADetailer prompt 3rd\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer prompt 4th": "After Detailer 正向提示词",
|
||
"ADetailer prompt 4th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer prompt 5th": "After Detailer 正向提示词",
|
||
"ADetailer prompt 5th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer prompt 6th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer prompt 7th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer prompt 8th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer prompt 9th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer prompt 10th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用预设提示词",
|
||
"ADetailer sampler": "After Detailer 採样方法",
|
||
"ADetailer sampler 2nd": "After Detailer 採样方法",
|
||
"ADetailer sampler 3rd": "After Detailer 採样方法",
|
||
"ADetailer sampler 4th": "After Detailer 採样方法",
|
||
"ADetailer sampler 5th": "After Detailer 採样方法",
|
||
"ADetailer sampler 6th": "After Detailer 採样方法",
|
||
"ADetailer sampler 7th": "After Detailer 採样方法",
|
||
"ADetailer sampler 8th": "After Detailer 採样方法",
|
||
"ADetailer sampler 9th": "After Detailer 採样方法",
|
||
"ADetailer sampler 10th": "After Detailer 採样方法",
|
||
"ADetailer steps": "After Detailer 迭代步数",
|
||
"ADetailer steps 2nd": "After Detailer 迭代步数",
|
||
"ADetailer steps 3rd": "After Detailer 迭代步数",
|
||
"ADetailer steps 4th": "After Detailer 迭代步数",
|
||
"ADetailer steps 5th": "After Detailer 迭代步数",
|
||
"ADetailer steps 6th": "After Detailer 迭代步数",
|
||
"ADetailer steps 7th": "After Detailer 迭代步数",
|
||
"ADetailer steps 8th": "After Detailer 迭代步数",
|
||
"ADetailer steps 9th": "After Detailer 迭代步数",
|
||
"ADetailer steps 10th": "After Detailer 迭代步数",
|
||
"ADetailer VAE": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 2nd": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 3rd": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 4th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 5th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 6th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 7th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 8th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 9th": "After Detailer 使用的 VAE",
|
||
"ADetailer VAE 10th": "After Detailer 使用的 VAE",
|
||
"ADetailer x(→) offset": "X轴 (→) 偏移",
|
||
"ADetailer y(↑) offset": "Y轴 (↑) 偏移",
|
||
"Adjust brush size": "调整画笔大小",
|
||
"adjust denoise each img2img batch": "调整每个图生图批次的重绘幅度",
|
||
"Adjust desired FPS if needed/wanted. Default slider position is original FPS.": "调整所需的 FPS。预设滑块位置为原始 FPS。",
|
||
"Adjust settings": "调节设定",
|
||
"Adjust strength": "调整强度",
|
||
"adjust the brightness of the mask. Should be a positive number, with 1.0 meaning no adjustment.": "调整遮罩的亮度。该值应该为正数，1.0 表示无调整",
|
||
"Adjust tilt for detected faces": "调节俯仰以便检测脸部",
|
||
"adjusts the aspect ratio for the depth calculation (normally 1)": "调节深度计算的纵横比 (通常为 1)",
|
||
"adjusts the aspect ratio for the depth calculations": "调整深度计算的纵横比",
|
||
"Adjusts the generated prompt. You will need to experiment with this setting.": "调整已产生的提示词，使用时要尝试调整此设定",
|
||
"adjusts the overall contrast per frame [default neutral at 1.0]": "调整每帧图像的整体对比度 [预设值为1.0]",
|
||
"adjusts the overall contrast per frame [neutral at 1.0, recommended to *not* play with this param]": "调整每帧图像的整体对比度 [预设值为1.0，*不* 推荐使用此参数]",
|
||
"adjusts the scale at which the canvas is moved in 3D by the translation_z value. [maximum range -180 to +180, with 0 being undefined. Values closer to 180 will make the image have less depth, while values closer to 0 will allow more depth]": "通过平移 Z 调整画布在三维空间中移动的比例 [最大範围 -180 至 +180 ，0 值未定义。接近 180 会降低图像的纵深感，而接近 0 会增加］",
|
||
"Adjusts the size of the image by multiplying the original width and height by the selected value. Ignored if either Resize width to or Resize height to are non-zero.": "通过乘以选定值来调整图像的大小。如果「将宽度调整至」或「将高度调整至」不为零，则会忽略。",
|
||
"Admirable": "极好的",
|
||
"ads": "含广告",
|
||
"Advanced": "进阶的",
|
||
"Advanced editing": "进阶编辑",
|
||
"Advanced options": "进阶选项",
|
||
"Advanced Options": "进阶选项",
|
||
"Advanced Seed Blending": "进阶种子混合",
|
||
"Advanced Settings": "进阶设定",
|
||
"Advanced workflow": "进阶工作流",
|
||
"Advertising": "Advertising (广告)",
|
||
"Aesthetic Gradients": "美学梯度",
|
||
"Aesthetic Image Scorer": "美学图像评分器",
|
||
"Aesthetic imgs embedding": "美学图集嵌入",
|
||
"Aesthetic learning rate": "美学学习率",
|
||
"Aesthetic Scorer": "美学评分器",
|
||
"Aesthetic scorer": "美学评分器",
|
||
"Aesthetic steps": "美术风格叠代步数",
|
||
"Aesthetic text for imgs": "该图集的美学描述",
|
||
"Aesthetic weight": "美学权重",
|
||
"aesthetic_score": "美学分数",
|
||
"Aestheticism": "唯美主义",
|
||
"Affect Uncond": "影响非条件",
|
||
"Affected areas": "符合区域",
|
||
"Affects optical flow hybrid motion. 1 is normal flow. -1 is negative flow. 0.5 is half flow, etc...": "影响光流合成运动。1为正常流量；-1为负流量；0.5为半流量，以此类推...",
|
||
"Affine": "仿射",
|
||
"After": "之後",
|
||
"After Generation": "完成生成後",
|
||
"After recompiling, later inferences will reuse the newly compiled model and achieve faster running times.": "重新编译後，後续推理将重新用新编译的模型并实作更短的执行时间",
|
||
"Agent Scheduler": "任务排程代理",
|
||
"Aggressive": "激进",
|
||
"Alias from file": "从档案读取别名",
|
||
"Alien": "Alien (异形)",
|
||
"all": "全部",
|
||
"All": "所有",
|
||
"all - force multiple --> idea by redditor WestWordHoeDown, it forces to choose between 2 and 3 image types": "all -- 全部 - 强制混合 --> 来自於 redditor: WestWordHoeDown 的创意，强制选择 2-3 种图像类型。",
|
||
"all --> normally picks a image type as random. Can choose a ‘other’ more unique type.": "all -- 全部 --> 通常会随机选择一个图像类型。可以选择一个 \"其他\" 更独特的类型。",
|
||
"All ControlNet units for all images in a batch": "所有图像的所有 ControlNet 单元處於同一个批次",
|
||
"All Displayed Ones": "所有已显示的",
|
||
"all filters": "所有筛选项",
|
||
"All models in this directory will receive the selected model's metadata": "此目录下的所有模型将被写入所选模型的中继资料",
|
||
"All notable changes to this project will be documented in this file.": "此项目中的所有显着更改都将被记录在本文档中",
|
||
"All of the code in this guide refers to our example.txt file unless otherwise noted. Remember to save your file with each change!": "除非另有宣告，否则本指南中的所有程式码都参考於我们的 example.txt 文档。每次修改後，记得储存你的文档！",
|
||
"All string sanitization logic has been moved into the": "所有字串清理逻辑都已移动到",
|
||
"Allow All": "允许全部",
|
||
"Allow detectmap auto saving": "允许检测图自动储存",
|
||
"Allow Full live preview method with lowvram/medvram": "允许在 lowvram/medvram 设定下使用完整实时预览",
|
||
"Allow http:// and https:// URLs for input images in API": "允许在 API 请求中将 http:// 与 https:// 网址作为输入图像使用",
|
||
"Allow img2img": "允许图生图",
|
||
"Allow manually uploading pnginfo from the uploaded plugin image to txt2img or img2img.": "允许从扩展中已上传的图像中手动上传 PNG 图像资讯到文生图或图生图",
|
||
"Allow NSFW": "允许成人内容",
|
||
"Allow other script to control this extension": "允许其他指令码控制此扩充功能",
|
||
"allow overwrite": "允许覆盖档案",
|
||
"Allow overwrite output-model": "允许输出时覆盖同名模型",
|
||
"Allow Painting": "允许重绘",
|
||
"Allow Post Processing": "允许後期處理",
|
||
"Allow Preview": "开启预览",
|
||
"Allow TF16 reduced precision math ops": "允许使用 TF16 低精度算符",
|
||
"Allow the default Euler a Sampling method. (Does not produce good results)": "允许使用预设的 Eular a 採样方法.（通常不会产生好的结果）",
|
||
"Allow Unsafe IP Address": "允许不安全的 IP 地址",
|
||
"Allowed categories for random artists selection when using the Roll button": "使用抽选艺术家按钮时将会随机的艺术家类别",
|
||
"Allows for random parameters during txt2img generation. This script is processed for all generations, regardless of the script selected, meaning this script will function with others as well, such as AUTOMATIC1111/stable-diffusion-webui-wildcards": "允许在文生图的生成期间使用随机的参数。无论选择哪种脚本，此脚本都会针对所有的生成进行處理，这意味着此脚本也可以与其他脚本一起使用，如万用字元",
|
||
"Allows for random parameters during txt2img generation. This script will function with others as well. Original author: https://git.mmaker.moe/mmaker/stable-diffusion-webui-randomize": "允许在文生图产生过程中使用随机参数。此指令码也可以与其他指令码一起执行。原作者：https://git.mmaker.moe/mmaker/stable-diffusion-webui-randomize",
|
||
"allows keyframing different samplers. Use names as they appear in ui dropdown in 'run' tab": "允许为不同关键帧使用不一样的採样方法。使用出现在 \"执行\" 页籤中 UI 下拉选单中显示的名称",
|
||
"allows keyframing different sd models. use *full* name as appears in ui dropdown": "允许关键帧使用不同的 SD 模型。使用出现在 UI 中 Stable Diffusion 模型下拉选项的模型 *完整* 名称",
|
||
"allows keyframing different sd models. Use *full* name as appears in ui dropdown": "允许关键帧使用不同的 SD 模型。使用出现在 UI 中 Stable Diffusion 模型下拉选项的模型 *完整* 名称",
|
||
"allows keyframing of samplers. Use names as they appear in ui dropdown in 'run' tab": "允许为不同关键帧使用不一样的採样方法。使用出现在 \"执行\" 页籤中 UI 下拉选单中显示的名称",
|
||
"Allows the model to learn brightness and contrast with greater detail during training. Value controls the strength of the effect, 0 disables it.": "允许模型在训练过程中更详尽地学习亮度和对比度。本选项数值控制学习效果的强弱，0 则不生效。",
|
||
"Allows the Web UI to use LoRAs (1.X and 2.X) to generate images. Also allows editing .safetensors networks prompt metadata.": "允许使用者介面使用 LoRAs（1.X 和 2.X）产生图像。同时，还允许编辑 .safetensors 网路提示词中继资料。",
|
||
"Allows the Web UI to use networks (LoRA) trained by their scripts to generate images.": "允许 Web UI 使用 由其脚本训练的网络（LoRA）生成图像",
|
||
"Allows training an embedding from one or few pictures, specifically meant for applying styles. Also, allows use of these specific embeddings to generated images.": "允许从一张或多张图像中训练一个嵌入（embedding），专门用於套用风格。同时，也允许使用这些特定的嵌入来产生图像。",
|
||
"allows users to create infinite zoom effect videos using stable diffusion outpainting method.": "使用 stable diffusion 向外绘製建立无限缩放效果影片。",
|
||
"Allows users to generate images based on prompts written in 50 different languages. It translates the prompts to english from a selected source language before generating the image.": "允许使用者根据用50种不同语言写成的提示词来产生图像。在产生图像之前，它会将来自所选源语言的提示翻译成英语。",
|
||
"Allows users to set a global weight for the negative prompt.": "允许使用者设定反向提示词的全域权重",
|
||
"allows you to create a region for inpainting based only on the text content (as opposed to the brush tool.) This shortcode only works in the img2img tab of the A1111 WebUI.": "可以基于文本建立重绘区域（而无需使用画笔）。注意此程式码仅可在A1111 WebUI的图生图中使用。",
|
||
"Allows you to easily, or even completely automatically start using HTTPS.": "让你可以很简单的自动组态安全性传输协定（https）",
|
||
"Allows you to include various shortcodes in your prompts. You can pull text from files, set up your own variables, process text through conditional functions, and so much more - it's like wildcards on steroids.": "允许你在提示词中包含各种短程式码。 你可以从档案中提取文本、设定自己的变数、通过条件函式處理文本等等 - 就像是增强版的万用字元",
|
||
"Allows you to include various shortcodes in your prompts. You can pull text from files, set up your own variables, process text through conditional functions, and so much more - it's like wildcards on steroids. It now includes integrations like hard-prompts made easy, ControlNet, txt2img2img and txt2mask.": "允许您在提示词中包含各种短码。您可以从档案中提取文本，设定自己的变数，通过条件函数處理文字等 ，就像是在类固醇中的万用字元。它现在包括了一些整合，如硬提示词（hard-prompts）、ControlNet、文生图生图和文生遮罩。",
|
||
"Allows you to manually edit textual inversion embeddings using sliders.": "让你可以手动用滑桿编辑风格迁移多个嵌入的参数",
|
||
"Allows you to modify or replace your img2img mask with arbitrary files.": "允许您修改图生图遮罩或将其取代为任意档案。",
|
||
"allows you to reproduce images that feature shortcodes with randomness, such as": "允许您复现用随机性短程式码的图像，例如",
|
||
"Allows you to run different logic blocks with inner case statements that match the value of the given positional argument.": "允许你执行含有与给定位置参数值符合的内部条件语句的各种逻辑程式码块",
|
||
"alpha": "α",
|
||
"Alpha (default is half of Net dim)": "Alpha 值 (预设为网络维度的一半)",
|
||
"Alpha channel image": "Alpha 通道图像",
|
||
"Alpha matting": "Alpha 遮罩",
|
||
"alpha threshold": "透明度阈值",
|
||
"Alpha threshold": "透明度阈值",
|
||
"Alphabetical Order": "字母顺序",
|
||
"Also add data for WebUI metadata editor": "同步为 WebUI 元数据编辑器新增数据",
|
||
"also delete off-screen images": "允许同时删除萤幕外的图像",
|
||
"also enable wierd blocky upscale mode": "同时启用糟糕的分块放大模式",
|
||
"Also note: if a shortcode is undefined, Unprompted will print it as a literal as if you had escaped it.": "另外请注意：如果一个短程式码未定义，Unprompted会将其直接以原样文字显示，就好像进行了转义處理一样",
|
||
"Also output single joined audio file (will be named <date>_joined.wav)": "同时输出一个音讯档案 (将命名为 <日期>_joined.wav)",
|
||
"Also save final image with intermediates": "同时储存最终图像和中间过程的图像",
|
||
"Also Stop might help you to make draft generations without highres-fix if you set your total steps high, but use Anti Burn to stop early; this way your result will be more stable (comparing to full-step version) than if you had asked for less steps without stopping.": "此外，停止功能有助於生成没高清修复的草图，只要您设定了较高的总步数，并使用Anti Burn来提前停止。这样的结果（与完整步骤相比）会比没有停止的少步数更稳定。",
|
||
"Also, for adaptive (DPM fast and DPM adaptive) and compvis samples (DDIM and PMLS), the final image is slightly different than what was stored from last model call. Now the proper image is processed as extra step for those samplers (Revert disables this too) and used in averaging.": "此外，对於adaptive样本（如DPM fast和DPM adaptive）以及compvis样本（如DDIM和PMLS），最终生成的图像与上一次模型调用时储存的图像会略有差异。现在，这些採样器会有额外步骤處理以得到正确的图像（撤销操作也会停用此功能），并用於平均。",
|
||
"Also, many samples create subtle differences on image in the end at large step count generation, but don't actually increase its quality: each iteration is slightly corrupted in finer details.": "此外，虽然在大步数生图时，许多样本的图像会有细微的差异，但这实际上并不会提高图像品质：每次迭代都会略微损坏一些更为精细的细节",
|
||
"Also, please set the booru selection here before using select or search.": "另外，在选择或搜寻之前，请在这裡设定你要用哪个 booru",
|
||
"Alt + wheel": "Alt + 滚轮",
|
||
"Alt+left/right moves prompt elements": "使用 Alt+ ←/→ 移动提示词内容",
|
||
"alternate": "交替",
|
||
"Alternate Steps": "交替叠代",
|
||
"Alternatively, if one wants to keep faraway details, one may instead make them smaller and closer than they physically would be (in order to fit nicely into the limited depth space).": "或者，如果想保留远處的细节，可以让它们比实际上更小、更近，以便很好地适应有限的深度空间。",
|
||
"Alternatively, use": "或者，您也可以使用",
|
||
"Alternatively, you can enable": "或者，您可以启用",
|
||
"Always": "保持",
|
||
"Always append space if inserting at the end of the textbox": "如果在文本输入框的末尾插入，总是附加空格",
|
||
"Always bodysnatch responsibly.": "始终以负责任的态度使用 bodysnatch。",
|
||
"Always discard next-to-last sigma": "始终丢弃倒数第二个 sigma",
|
||
"Always Display Buttons": "总是显示按钮",
|
||
"Always Display Buttons on model cards": "模型卡片保持显示按钮",
|
||
"Always fully": "补全完整嵌套",
|
||
"Always print all generation info to standard output": "始终将所有产生资讯输出到 standard output （一般为控制台）",
|
||
"Always save all generated image grids": "始终储存所有产生的宫格图",
|
||
"Always save all generated images": "始终储存所有产生的图像",
|
||
"Always show all networks on the Lora page": "在 Lora 页面保持显示所有模型",
|
||
"American Impressionism": "美国印象派",
|
||
"amount of graininess to add per frame for diffusion diversity": "每帧增加的颗粒度数量，用於扩散多样性",
|
||
"Amount of images to generate": "图像生成数量",
|
||
"amount of presence of previous frame to influence next frame, also controls steps in the following formula [steps - (strength_schedule * steps)]": "前一帧影响下一帧的存在量，也控制下式中的步数：[steps - (strength_schedule * steps)]",
|
||
"Amount of time to pause between Epochs (s)": "每训练週期之间暂停的时间（秒）",
|
||
"Amount of tries": "尝试次数",
|
||
"Amount schedule": "强度计劃",
|
||
"Amount times to repeat upscaling with IMG2IMG (loopback)": "通过图生图放大的重複次数 (回送)",
|
||
"Amplification of distortion of circles": "圆形变形的放大倍数",
|
||
"Amplifies the contrast that may be lost in partially masked regions.": "增强在部分遮罩区域中可能减弱的对比度。",
|
||
"An always visible script extension to configure seamless image tiling independently for the X and Y axes.": "一个始终可见的脚本扩充套件，用於分别组态 X 和 Y 轴上的无缝图像铺贴。",
|
||
"An easy way to mix and match elements to prompts that affect the style of the result.": "方便地组合不同元素，并影响结果的样式。",
|
||
"An extension of the built-in Composable Diffusion, allows you to determine the region of the latent space that reflects your subprompts. Note: New maintainer, uninstall prev. ext if needed.": "内置 Composable Diffusion 扩充功能，能使您将子提示词反映在特定的潜在变数空间区域。注意：如有必要，请解除安装先前的扩充功能。",
|
||
"An extension to allow managing custom depth inputs to Stable Diffusion depth2img models.": "一个扩充套件，允许管理自订深度输入到 Stable Diffusion depth2img 模型。",
|
||
"An hour ago, I released Unprompted v2.0.0, which is my largest update since launch. It introduces a streamlined form of \"advanced expressions\" that, in my view, brings Unprompted up to the level of a real, honest-to-goodness templating language.": "一个小时前，我推出了 Unprompted v2.0.0，这是自从發佈以来最大的一次更新，引入了一种更为精简的“进阶表达式”，在我看来，这让 Unprompted 达到了一个真正的、名副其实的模板语言的水平。",
|
||
"An integer that correponds to your progress in a batch run. For example, if your batch count is set to 5, then": "一个与批處理执行进度相对应的整数。例如，如果你的批處理次数为5，那麼",
|
||
"An object detection and auto-mask extension for Stable Diffusion web UI.": "一个物件检测与自适应遮罩扩展",
|
||
"Analog Film": "Analog Film (胶片)",
|
||
"Analyse": "分析",
|
||
"Analyse Face": "分析脸部",
|
||
"Analysis": "分析",
|
||
"Analysis Mode": "分析模式",
|
||
"Analyze": "分析",
|
||
"Analyzes video frames for camera motion and applies movement to render.": "分析影片帧中的镜头运动, 并将运动应用於渲染",
|
||
"Ancestral ETA Schedule": "Ancestral ETA 调度计劃",
|
||
"and": "与",
|
||
"AND": "与",
|
||
"and drop a star if you like it!": ", 如果喜欢本延伸模组的话还请点个 Star !",
|
||
"and generate images according to random segmentation which preserve image layout.": " 来根据储存图像的布局随机分割生成图像。",
|
||
"and report your problem.": "反馈遇到的问题",
|
||
"and restart webui, and enjoy the joy of creation!": "并重启 webui，享受创作的乐趣！",
|
||
"and so the shortcode must have a way to differentiate between the two types.": "因此，这个短程式码必须要有区分这两种类型的方法。",
|
||
"and tweaked the keywords to attempt giving expected results most of the time. Certainly, your suggestions for improvements are very welcome.": "并微调了关键词，以便尽可能地产生预期效果。当然，我们非常欢迎您的改进建议。",
|
||
"and upscale to the size of the original video.": "放大图像到原始影片的尺寸。",
|
||
"and, of course, that will have a very visible effect on the result as well. Currently there are 135 artists, 55 art styles and 25 emotions available for selection and represented with preview images.": "当然，这会明显影响结果。现有135位艺术家、55种艺术风格和25种情绪可供选择，并配有预览图。",
|
||
"Angle": "角度",
|
||
"angular": "angular (棱角)",
|
||
"animal": "animal (动物)",
|
||
"animal - A random (fictional) animal. Has a chance to have human characteristics, such as clothing added.": "animal - 动物 - 一隻随机的（虚构的）动物。可能会拥有人类的特徵，如穿衣服。",
|
||
"animal_ears.pt": "animal_ears.pt (2D 兽耳)",
|
||
"animal_openpose": "animal_openpose (OpenPose 姿态 - 动物)",
|
||
"animation": "动画",
|
||
"Animation mode": "动画模式",
|
||
"Animation settings": "动画设定",
|
||
"Animator": "动画製作器",
|
||
"anime": "anime (动漫)",
|
||
"Anime": "Anime (动漫)",
|
||
"anime key visual": "anime key visual (动漫主视觉图/海报)",
|
||
"Anime Remove Background": "动漫移除背景模式",
|
||
"Anime Style (Up Detection, Down mask Quality)": "动漫风格模式 (提高辨识能力, 降低遮罩品质)",
|
||
"Anime-inclined great guide (by FizzleDorf) with lots of examples:": "充满动漫风格的详细指南（由 FizzleDorf 製作），内含许多範例：",
|
||
"Annotator resolution": "预處理器解析度",
|
||
"Answer": "响应",
|
||
"Anti Blur": "模糊抑制",
|
||
"anti-burn": "反烧机",
|
||
"Anzhc Eyes -seg-hd.pt": "Anzhc Eyes -seg-hd.pt (2D / 写实 / 单眼)",
|
||
"Anzhc Face -seg.pt": "Anzhc Face -seg.pt (2D / 写实 / 脸)",
|
||
"API endpoint": "API 端点",
|
||
"API Endpoint": "API 端点",
|
||
"API info may not be necessary for some boorus, but certain information or posts may fail to load without it. For example, Danbooru doesn't show certain posts in search results unless you auth as a Gold tier member.": "API 资讯对於某些 booru 站点可能不是必需的，但如果没有它，某些资讯或图帖可能无法载入。 例如，除非你的 API 验证属於黄金会员，否则 Danbooru 可能不会在搜寻结果中显示某些图帖。",
|
||
"API key": "API Key",
|
||
"API Key": "API 金钥",
|
||
"API key for authenticating with Civitai. This is required to download some models. See Wiki for more details.": "用於通过 Civitai 进行身份验证的 API 密钥。下载部分模型时需要。更多详细资讯请查阅 Wiki",
|
||
"API Keys": "API 密钥",
|
||
"app_started_callback": "套用已启动的回调",
|
||
"append": "放後面",
|
||
"Append": "追加至末尾",
|
||
"Append Artist tags from CLIP": "使用来自 CLIP 的艺术家标籤",
|
||
"Append Caption to File Name": "将描述文本追加到档名之後",
|
||
"Append comma on tag autocompletion": "自动完成标记时加入逗号",
|
||
"Append commas": "追加逗号",
|
||
"Append DeepDanbooru to Caption": "把 DeepDanbooru 的结果追加到已有的描述文本之後",
|
||
"Append Flavor tags from CLIP": "使用来自 CLIP 的风格标籤",
|
||
"Append Hires prompts to the end of the original prompts instead of replacing it.": "将高解析度修复提示词追加到原始提示词的末尾，而不是取代它们",
|
||
"Append interrogated prompt at each iteration": "在每次叠代中附加询问提示。",
|
||
"Append Medium tags from CLIP": "使用来自 CLIP 的介质标籤",
|
||
"Append Movement tags from CLIP": "使用来自 CLIP 的动作标籤",
|
||
"Append png info to prompts": "将提示词新增到 PNG 资讯内",
|
||
"Append prompts, not replace": "追加提示词 (非取代)",
|
||
"Append space on tag autocompletion": "标籤补全後自动新增空格",
|
||
"Applies LoRA strength; block by block on the fly. Includes presets, weight analysis, randomization, XY plot.": "在执行时逐块的套用 LoRA 强度。包括预设值、权重分析、随机化以及 XY 图。",
|
||
"Applies mirroring and flips to the latent images to produce anything from subtle balanced compositions to perfect reflections": "将图像的潜在变数状态进行镜像和翻转，以产生从轻度平衡的构图到完全对称的任何图像",
|
||
"Apply": "套用",
|
||
"Apply (Reload UI)": "套用 (重载 UI)",
|
||
"Apply all selected styles from the style selction dropdown in main UI to the prompt.": "从主介面的预设样式选择下拉选单中将所有选定的预设样式套用到提示词。",
|
||
"Apply all selected styles to prompts.": "将所有当前选择的预设样式新增到提示词中",
|
||
"Apply and quit": "套用更改并退出",
|
||
"Apply and restart UI": "更新并重新启动使用者介面",
|
||
"Apply block weight from text": "从文本框套用分块权重值",
|
||
"Apply button loads settings\nWrite custom name to enable save\nDelete automatically will save to file": "套用载入按钮以载入预设\n输入自订名称来启用储存功能\n储存到档案时会自动删除",
|
||
"Apply changes & restart server": "套用更改并重启",
|
||
"Apply changes to ALL displayed images": "将更改应用於所有已显示的图像",
|
||
"Apply changes to filtered images": "套用更改至过滤後的图像",
|
||
"Apply changes to selected image": "将更改应用於所选图像",
|
||
"Apply color correction to img2img results to match original colors": "对图生图结果套用颜色校正以符合原始颜色",
|
||
"Apply color correction to img2img results to match original colors.": "对图生图结果套用颜色校正以符合原始颜色",
|
||
"apply colormatch before adding noise (use with CN's Tile)": "在新增噪点前套用颜色符合 (和 ControlNet 的 Tile 模型一起使用)",
|
||
"Apply data": "套用数据",
|
||
"Apply horizontal Flip": "套用水平翻转",
|
||
"Apply Horizontal Flip": "套用水平翻转",
|
||
"Apply if any": "套用 (如有)",
|
||
"Apply if any: remove style text from prompt; if any styles are found in prompt, put them into styles dropdown, otherwise keep it as it is.": "套用 (如有): 从提示词中删除对应预设样式文本; 将符合到的预设样式加入下拉选单",
|
||
"Apply inside mask only": "仅使用内部遮罩",
|
||
"Apply LoRA checkpoint to TensorRT model": "将 LoRA 套用到 TensorRT 模型",
|
||
"Apply Lora to outputs rather than inputs when possible (experimental)": "尽可能将低秩微调模型 (LoRA) 应用於输出而非输入 (实验性选项)",
|
||
"Apply mask to original image": "套用遮罩到原始图",
|
||
"Apply mask to the Ref Image": "套用遮罩到参考图",
|
||
"Apply mask to the result": "套用遮罩到结果",
|
||
"Apply only selected scripts to ADetailer": "只将选定的脚本应用於 After Detailer",
|
||
"Apply Presets": "套用预设",
|
||
"Apply scripts to faces": "使用脚本辨识脸部",
|
||
"Apply selected styles to current prompt": "将所选样式套用於当前提示",
|
||
"Apply selection filter": "套用选择过滤器",
|
||
"Apply settings": "套用设定",
|
||
"Apply Settings": "储存设定",
|
||
"Apply Style": "套用样式",
|
||
"Apply to": "套用到",
|
||
"Apply transfer control when loading models": "载入模型时套用控制转移",
|
||
"Apply: remove style text from prompt, always replace styles dropdown value with found styles (even if none are found).": "套用: 从提示词中删除对应预设样式文本; 总是将下拉选单内容取代为相应预设样式名 (即使不存在对应预设)",
|
||
"Architectural": "Architectural (建筑)",
|
||
"Architecture": "架构",
|
||
"Archive filename pattern": "压缩包档名格式",
|
||
"Area": "区域",
|
||
"Area (large to small)": "面积 (从大到小)",
|
||
"Area lower bound": "面积下限",
|
||
"Area upper bound": "面积上限",
|
||
"argument allows you to return the content if one of many variables return true. This is the equivalent of running \"or\" instead of \"and\" in programming, e.g.": "参数允许您在多个变数中的一个返回true时返回内容。这相当於在编程中执行 \"or\" 而不是 \"and\", 例如: ",
|
||
"argument allows you to test for false instead of true, e.g.": "参数允许您测试false而不是true, 例如: ",
|
||
"argument which increases the radius of the instance masks by a given number of pixels.": "将实例遮罩的半径增加给定数量的像素的参数。",
|
||
"argument which increases the radius of your selection by a given number of pixels.": "将选择的半径增加给定数量的像素的参数。",
|
||
"Arguments are case-sensitive.": "参数区分大小写。",
|
||
"Arm Length": "手臂长度",
|
||
"art deco": "art deco (装饰艺术)",
|
||
"art nouveau": "art nouveau (新艺术运动)",
|
||
"Artist Tags": "艺术家标籤 (Tags)",
|
||
"Artistic": "艺术",
|
||
"artists": "艺术家",
|
||
"Artists have a major impact on the result. Automatically, it will select between 0-3 artists out of 3483 artists for your prompt.": "Artists (艺术家风格) 对图像结果有很大影响。它会自动从 3483 名艺术家中选择 0-3 名艺术家名作为你提示词的一部分。",
|
||
"Artists to study": "艺术家图库",
|
||
"Artists To Study": "艺术家图库",
|
||
"Arxiv": "预印本 (Arxiv)",
|
||
"as a UI to define your animation schedules (see the Parseq section in the Init tab).": " 作为定义动画参数表的UI (请参见初始化页籤中的参数定序器部分) .",
|
||
"as a UI to define your animation schedules (see the Parseq section in the Keyframes tab).": "作为一个用来定义动画时间轴的使用者介面（UI），您可以使用 sd-parseq（请参考「关键帧（Keyframes）」标籤中的 Parseq 部分）",
|
||
"as it allows to run the inpainting for each found instance individually. This is useful, when using high resolution inpainting. This shortcode only works in the img2img tab of the A1111 WebUI.": "因为这能让每个被辨识物件都能单独重绘。特别在高解析度重绘时非常有用。此短程式码仅在 A1111 WebUI 的图生图中有效。",
|
||
"Ascending": "升序",
|
||
"Aspect Ratio Calculator": "尺寸缩放计算器",
|
||
"Aspect Ratio Helper": "长宽比小帮手",
|
||
"Aspect Ratio picker-xhox": "Aspect Ratio picker-xhox 解析度选取器",
|
||
"Aspect Ratio schedule": "纵横比调度计劃",
|
||
"Aspect Ratio selector": "长宽比选择器",
|
||
"Aspect Ratio:": "比例：",
|
||
"Aspect Ratios Dropdown": "下拉式纵横比选单",
|
||
"Asymmetric Tiling": "非对称平舖",
|
||
"Asymmetric tiling": "非对称平舖",
|
||
"At the moment, you still have to select an image in the WebUI before pressing Generate, or this shortcode will throw an error. You can select any image - it doesn't matter what it is, just as long as the field isn't empty.": "现在，在点击生成按钮之前，您仍需在 WebUI 中选择一张图像，否则程式码会报错。您可以选择任何一张图像——是什麼不重要，只要不是空就行。",
|
||
"Attempt to automatically set training parameters based on total VRAM. Still under development.": "尝试根据总显存自动设定训练参数。仍在开發中。",
|
||
"Attention grabber": "随机关键词吸引注意力",
|
||
"Attention Heatmap": "注意力热度图",
|
||
"Attention Map": "注意力图（Att-Map）",
|
||
"Attention texts for visualization. (comma separated)": "视觉化的注意文字（以逗号分隔）",
|
||
"ATTENTION! Largest model (dpt_beit_large_512) weighs 1.5 GB, it will take A WHILE to download.": "请注意！最大的模型（dpt_beit_large_512）大小为 1.5 GB，下载需要一段时间！",
|
||
"Audio (if provided) will *not* be transferred to the interpolated video if Slow-Mo is enabled.": "音讯 (如果提供了) 在以下选项启用时将不会转码压制进帧插值後的影片内：慢动作",
|
||
"Audio Player 0": "音讯播放器 0",
|
||
"Audio Player 1": "音讯播放器 1",
|
||
"Audio Player 2": "音讯播放器 2",
|
||
"Audio Player 3": "音讯播放器 3",
|
||
"Audio Player 4": "音讯播放器 4",
|
||
"Audio Player 5": "音讯播放器 5",
|
||
"Audio Player 6": "音讯播放器 6",
|
||
"Audio Player 7": "音讯播放器 7",
|
||
"Author": "作者",
|
||
"Author of this model": "此模型的作者",
|
||
"auto": "自动",
|
||
"Auto": "自动",
|
||
"AUTO": "自动",
|
||
"Auto det_size : Will load model twice and test faces on each if needed (old behaviour). Takes more VRAM. Precedence over fixed det_size": "自动 det_size : 如有需要可启用，将载入模型两次以在每个模型上测试脸部 (旧版行为)。会佔用更多显存。优先於固定 det_size",
|
||
"Auto detect size from img2img": "从图生图自动检测图像尺寸",
|
||
"Auto enable when loading the PNG Info of a generation that used FreeU": "在辨识 PNG 图像资讯时载入到使用过 FreeU 的图像後自动启用 FreeU",
|
||
"Auto face size adjustment by model": "通过模型自动调整脸部大小",
|
||
"Auto focal point crop": "自动焦点裁切",
|
||
"Auto load and save JSON database": "自动载入并储存 JSON 数据库",
|
||
"Auto SAM": "自动 SAM",
|
||
"Auto SAM Config": "自动 SAM 组态",
|
||
"Auto SAM is mainly for semantic segmentation and image layout generation, which is supported based on ControlNet. You must have ControlNet extension installed, and you should not change its directory name (sd-webui-controlnet).": "自动 SAM 基於 ControlNet 的支援，主要用於语义分割和图像分层。需安装 ControlNet 扩展，且不能修改其目录名 (sd-webui-controlnet)。",
|
||
"Auto save merged model": "自动储存合併後模型",
|
||
"Auto search port": "自动检索连接埠",
|
||
"Auto segmentation output": "自动语义分割输出",
|
||
"Auto Tagging": "自动标记",
|
||
"Auto Tagging option": "自动标记选项",
|
||
"Auto TLS-HTTPS": "自动使用安全性传输协定（https）",
|
||
"Auto Translate": "自动翻译",
|
||
"Auto-Adjust (WIP)": "自动调整 (施工中)",
|
||
"Auto-contrasts the mask for the composite. If enabled, uses the low/high autocontrast cutoff schedules.": "对遮罩进行自动对比度處理後进行合成。如启用，则使用低/高自动对比度隔离调度计劃。",
|
||
"auto-delete imgs when video is ready": "影片完成时自动删除图像",
|
||
"auto-delete imgs when video is ready. Will break Resume from timestring!": "在影片完成後自动删除图像。会导致恢复製作动画过程选项失效!",
|
||
"auto-delete inputframes (incl CN ones) when video is ready": "当影片完成时自动删除输入帧 (包括 ControlNet 页籤中的)",
|
||
"auto-sd-paint-ext": "画图工具扩充",
|
||
"Auto-sized crop": "自动选择大小的剪裁",
|
||
"autocast": "自动转换",
|
||
"Autocomplete options": "自动补全选项",
|
||
"Autocontrast low/high cutoff schedules 0-100. Low 0 High 100 is full range.": "自动对比度低/高隔离调度从 0 到 100。最低值 0 到最高值 100 是整体範围",
|
||
"Autodetect": "自动检测",
|
||
"automatic": "自动",
|
||
"Automatic": "自动",
|
||
"Automatic backward compatibility": "自动向後相容",
|
||
"Automatically adjusts the width and height parameters in img2img mode based on the proportions of the input image.": "在图生图中，根据输入图像比例自动调节长度高度。",
|
||
"Automatically convert VAE to bfloat16": "自动转换 VAE 为 bfloat16",
|
||
"Automatically detects faces and replaces them.": "自动侦测脸部并进行替换。",
|
||
"Automatically expands an image that does not fit completely in the canvas area, similar to manually pressing the S and R buttons": "自动展开不完全符合画布区域的图像, 相当於手动按下 S 和 R 按钮",
|
||
"Automatically open webui in browser on startup": "启动後自动在浏览器开启 webui 介面",
|
||
"Automatically purge wildcard cache on every generation.": "每次生成时自动清理万用字元缓存",
|
||
"Automatically remove backgrounds. Uses an onnx model fine-tuned for anime images. Runs on GPU.": "自动删除背景。使用为动漫图像微调的 onnx 模型。在 GPU 上执行。",
|
||
"Automatically revert VAE to 32-bit floats": "自动恢复 VAE 为 float32",
|
||
"Automatically set the Scale by factor based on the name of the selected Upscaler.": "根据所选放大模型的名称自动设定放大倍数",
|
||
"Automatically unpack .zip after downloading": "下载完成後自动解压 .zip 档案",
|
||
"Automatically unpack .zip files after downloading": "完成下载後自动解压 .zip 档案",
|
||
"Automatically update your prompt with interesting modifiers. (Runs slowly the first time)": "使用有趣的修饰符自动更新你的提示词。（第一次执行会比较慢）",
|
||
"Automaticlly revert VAE to 32-bit floats": "自动恢复 VAE 为 float32",
|
||
"Available": "可用",
|
||
"Available LORA": "可用的 LORA 模型",
|
||
"Available LORAs": "可用的 LORA 模型",
|
||
"Available LyCORIS": "可用的 LyCORIS 模型",
|
||
"Available TensorRT Engine Profiles": "可用的 TensorRT 引擎组态",
|
||
"Average image color": "平均图像颜色",
|
||
"Axis": "轴",
|
||
"Back in the main UI, select the TRT model from the sd_unet dropdown menu at the top of the page.": "回到主介面，从介面顶部的 SD Unet 下拉选单选择 TRT 模型。",
|
||
"Back to top": "返回顶部",
|
||
"Backend": "後端",
|
||
"Background": "背景",
|
||
"background color": "背景颜色",
|
||
"Background Color": "背景颜色",
|
||
"Background color for image grids": "网格图背景颜色",
|
||
"Background gradiant color": "背景渐变色",
|
||
"Background source(mp4 or directory containing images)": "背景源（mp4 或包含图像的目录）",
|
||
"Background type": "背景类型",
|
||
"Backup original text file (original file will be renamed like filename.000, .001, .002, ...)": "备份原本 txt 档案 (原文件会被重新命名，类似於：.000, .001, .002, ...)",
|
||
"Backup/Restore": "备份/恢复",
|
||
"Bake in VAE": "嵌入VAE",
|
||
"Bake in VAE: refresh": "嵌入 VAE 模型: 刷新",
|
||
"Balance between eyes": "双眼间距平衡",
|
||
"Balanced": "平衡",
|
||
"Band pass": "带通",
|
||
"baroque": "baroque (巴洛克)",
|
||
"base": "base (基础)",
|
||
"Base": "基层",
|
||
"Base alpha": "α 基数",
|
||
"Base Depth": "基础深度",
|
||
"Base model": "基础模型",
|
||
"Base Model used for Add-Difference mode": "用於差额叠加模式的底模",
|
||
"Base model:": "底模: ",
|
||
"Base Model:": "底模: ",
|
||
"Base on Stable Diffusion V2": "基於 Stable Diffusion v2 模型",
|
||
"Base Ratio": "基础比率",
|
||
"Base Sampler": "基础採样方法",
|
||
"Basic": "基本设定",
|
||
"Basic info": "基本资讯",
|
||
"Basis": "基准",
|
||
"Batch": "批次",
|
||
"Batch Checkpoints and Prompts": "批量检查点和关键字",
|
||
"Batch cond/uncond": "批量套用正向/反向调整",
|
||
"Batch count": "产生批次",
|
||
"Batch Edit Captions": "批量编辑描述",
|
||
"Batch Face Swap": "批次脸部交换",
|
||
"Batch Folder": "批量目录",
|
||
"Batch from Dir": "批量處理目录",
|
||
"Batch from directory": "批量處理目录",
|
||
"Batch from Directory": "从目录进行批量處理",
|
||
"Batch Images": "批處理图像",
|
||
"Batch img2img": "批量图生图",
|
||
"Batch import prompts": "批量汇入提示词",
|
||
"Batch Length As Row": "批次长度作为一列",
|
||
"Batch Mode, Resume and more": "批處理模式，恢复和更多",
|
||
"Batch Mode/ run from setting files": "批處理模式 / 从设定档案中载入",
|
||
"Batch name": "批次名称",
|
||
"Batch Option": "批量选项",
|
||
"Batch Options": "批量选项",
|
||
"batch process": "批量處理",
|
||
"Batch process": "批量處理",
|
||
"Batch Process": "批次處理",
|
||
"Batch process images. Will apply enhancement in the tools enhancement tab.": "批量處理图像。会套用在 “工具 --> 增强” 页籤中的增强功能",
|
||
"Batch Run": "批量處理",
|
||
"Batch Settings": "批量處理设定",
|
||
"Batch settings": "批次设定",
|
||
"batch size": "单批数量",
|
||
"Batch size": "每批数量",
|
||
"Batch Size": "每批数量",
|
||
"batch size for large queries": "巨量查询的批次数量",
|
||
"batch size in generation": "生成的单批数量",
|
||
"Batch Size to Simulate": "模拟的批量大小",
|
||
"batch size, restore face, hires fix settigns must be set here": "单批数量, 脸部修复, 高解析度修复等功能需要在本页面设定",
|
||
"Batch Sources Images": "批量图像源",
|
||
"Batch Upload": "批量上传",
|
||
"Batch-Warp": "批量修复",
|
||
"batch_count": "生成批次",
|
||
"batch_size": "每批数量",
|
||
"Batching": "批次",
|
||
"bauhaus": "bauhaus (包豪斯)",
|
||
"Be aware that this technique is essentially a training routine and will significantly lengthen your inference time, at least on the default settings. On a Geforce 3090, it appears to take around 1-2 minutes.": "请注意此技术实际上是一个训练程序，会显着延长生图时间，至少在预设设定下是这样的。在3090显卡上，可能需要大约1-2分钟。",
|
||
"Be careful when using xformers: sometimes your GPU will create different images in a row, even with very same settings! So you won't be able to correctly replicate an image of some previous step, which might mislead you when you start comparing things.": "使用 xformers 时要注意：有时即使使用完全相同的设定，你的 GPU 也会连续生成不同的图像！这会导致无法正确複刻之前某个步骤的图像，可能会误导你的比较。",
|
||
"Be sure to check the 'Write prompts to file' checkbox if you don't want to lose the generated prompts. Note, one image is still generated.": "不想失去产生的提示词的话，需确保勾选 「将提示词写入档案」。注意，依然会生成一张图像。",
|
||
"Beam Search": "Beam Search (集束检索)",
|
||
"Before": "之前",
|
||
"Before LORA/LyCO": "LoRA/LyCO 前",
|
||
"Before Motion": "镜头运动前",
|
||
"Before sending image, ensure img2img Inpaint tab is selected.": "發送图像前，请确保图生图页籤在区域重绘模式。",
|
||
"Before your text is sent to the neural network, it gets turned into numbers in a process called tokenization. These tokens are how the neural network reads and interprets text. Thanks to our great friends at Shousetsu愛 for inspiration for this feature.": "在你的文本被發送到神经网路之前，它在一个称为标记化的过程中被转化为数字。这些标记是神经网路阅读和解释文本的方式。感谢我们的好朋友 Shousetsu爱 为这个功能带来的灵感",
|
||
"Begin train": "开始训练",
|
||
"Beginners guide": "新手指南",
|
||
"behind": "有可用更新",
|
||
"behind HEAD": "落後於 HEAD",
|
||
"Below": "下方",
|
||
"Below here, you can generate a set of random prompts, and send them to the Workflow prompt field. The generation of the prompt uses the settings in the Main tab.": "在下方可以生成一组随机的提示词，并将它们發送到工作流提示词段。提示词的生成使用主选单中的选项设定。",
|
||
"Benchmark": "基准测试",
|
||
"Benchmark Data": "基准测试数据",
|
||
"Benchmark level": "基准测试水平",
|
||
"Benchmarks...": "基准测试...",
|
||
"best": "最佳",
|
||
"best practice page": "最佳做法页面",
|
||
"beta": "β",
|
||
"beta1": "β1",
|
||
"beta2": "β2",
|
||
"Better": "更好的",
|
||
"Bicubic": "双三次",
|
||
"Bilinear": "双缐性",
|
||
"Bilingual Localization": "双语翻译对照",
|
||
"Bilingual translation, no need to worry about how to find the original button. Compatible with language pack extensions, no need to re-import.": "双语翻译，无需担心如何寻找原文按钮。与语言包扩充功能相容，无需重新汇入。",
|
||
"Birthday": "生日",
|
||
"Bitwise operation": "按位 (Bitwise) 运算",
|
||
"Black outfill": "填黑",
|
||
"Black/Whitelist models": "属於 黑/白名单 的模型",
|
||
"Blacklist": "黑名单",
|
||
"blend": "混合",
|
||
"Blend": "混合",
|
||
"Blend Average": "平均混合",
|
||
"Blend Faces ((Source|Checkpoint)+References = 1)": "混合脸部 ((图源|模型)+参考图像 = 1)",
|
||
"Blend factor max": "最大混合系数",
|
||
"Blend factor slope": "混合斜率系数",
|
||
"Blend mode": "混合模式",
|
||
"Blend multiple outputs (batch, ControlNet maps)": "混合多个输出（批處理、ControlNet 映射）",
|
||
"BLIP: maximum description length": "BLIP: 最大描述长度",
|
||
"BLIP: minimum description length": "BLIP: 最小描述长度",
|
||
"BLIP: num_beams": "BLIP: 集束搜寻候选项数目",
|
||
"Block ID": "区块 ID",
|
||
"Block method": "分块模式",
|
||
"Block NSFW images of a certain threshold and higher.\n Civitai marks all images for NSFW models as also being NSFW.\n These ratings do not seem to be explicitly defined on Civitai's\n end, but \"Soft\" seems to be suggestive, with NSFW elements but\n not explicit nudity, \"Mature\" seems to include nudity but not\n always, and \"X\" seems to be explicitly adult content.": "成人内容屏蔽阈值。\n CivitAI 会将 NSFW 模型所有图像标记为成人内容。\n CivitAI 上无明确定义这些评级。\n “Soft” 可能表示暗示性的，有成人元素但不是明确的裸体；“Mature” 可能包含裸体，但不一定；“X” 可能是明确的是成人内容",
|
||
"Block NSFW images of a certain threshold and higher.\nCivitai marks all images for NSFW models as also being NSFW.\nThese ratings do not seem to be explicitly defined on Civitai's\nend, but \"Soft\" seems to be suggestive, with NSFW elements but\nnot explicit nudity, \"Mature\" seems to include nudity but not\nalways, and \"X\" seems to be explicitly adult content.": "成人内容屏蔽阈值。CivitAI 会将 NSFW 模型所有图像标记为成人内容。CivitAI 上无评级的明确定义：“Soft” 可能表示暗示性的，有成人元素但不是明确的裸体；“Mature” 可能包含裸体，但不一定；“X” 可能是明确的是成人内容",
|
||
"Block NSFW images of a certain threshold and higher. Civitai marks all images for NSFW models as also being NSFW. These ratings do not seem to be explicitly defined on Civitai's end, but \"Soft\" seems to be suggestive, with NSFW elements but not explicit nudity, \"Mature\" seems to include nudity but not always, and \"X\" seems to be explicitly adult content.": "屏蔽所选阈值及之上的成人内容。\n CivitAI 会将 NSFW 模型所有图像标记为成人内容。\n CivitAI 上无明确定义这些评级。\n “Soft” 可能表示暗示性的，有成人元素但不是明确的裸体；“Mature” 可能包含裸体，但不一定；“X” 可能是明确的是成人内容",
|
||
"Block NSFW Level Above": "成人内容屏蔽级别",
|
||
"Block Number": "分块数量",
|
||
"Block size": "区块大小",
|
||
"Blocks": "所启用的区块",
|
||
"blur": "模糊",
|
||
"Blur": "模糊",
|
||
"Blur amount:": "模糊量：",
|
||
"Blur edges of final overlay mask, if used. Minimum = 0 (no blur)": "最终覆盖遮罩的边缘模糊 (如启用) 。最小值=0 (无模糊)",
|
||
"Blur Sigma": "模糊 Sigma 值",
|
||
"blur_gaussian": "blur_gaussian (模糊 - 高斯模糊)",
|
||
"Blurred & stretched overlay": "模糊拉伸的叠加层",
|
||
"Body Parameters": "身体参数",
|
||
"Booru Score Threshold": "Booru 极限阈值",
|
||
"Booru tag autocompletion": "Booru 标记自动补齐",
|
||
"booru2prompt": "booru转提示词",
|
||
"BOOST (multi-resolution merging)": "提升（多解析度合併）",
|
||
"border": "边框",
|
||
"Border": "边界",
|
||
"border frames": "边界帧数",
|
||
"Border Frames": "边界帧数",
|
||
"Border Key Frames": "边界关键帧数",
|
||
"Border mode": "边界處理模式",
|
||
"both": "两者",
|
||
"Both": "两者",
|
||
"both directions": "双向",
|
||
"both passes": "两层都",
|
||
"bottom-top": "下 - 上",
|
||
"box_nms_thresh": "箱体数量阈值",
|
||
"branch": "分支",
|
||
"Branch": "分支",
|
||
"Brazillian portuguese localization": "巴西葡萄牙语本地化",
|
||
"breasts_seg.pt": "breasts_seg.pt (2D 胸部 包含部分衣服)",
|
||
"brightness": "亮度",
|
||
"Brightness": "亮度",
|
||
"Brightness:": "明亮度",
|
||
"Bring prompts and setting into one column left side": "将正反提示词输入框和设定移动到左侧",
|
||
"Browser": "浏览器",
|
||
"Browser default": "浏览器预设",
|
||
"Bucket Cropping": "批量裁剪",
|
||
"Bucket Steps": "批量Steps",
|
||
"Build": "建置",
|
||
"Build a face based on a batch list of images. Will blend the resulting face and store the checkpoint in the faceswaplab/faces directory.": "根据批量图像建置一个脸部模型。会混合生成的脸部并将模型存储在 “faceswaplab/faces” 目录下",
|
||
"Build a yaml file filled with prompts of your character, hit generate, and quickly preview them by their word attributes and modifiers.": "建立一个使用您的角色提示的 yaml 档，点击产生，并快速通过其字属性和修饰符预览它们。",
|
||
"Build a yaml file with your chosen parameters, and generate infinite-dimensional grids. Built-in ability to add description text to fields. See readme for usage details.": "建立一个使用选定的参数的 yaml 档，并产生无限维的网格。内建能力将描述文字新增到字段中。有关用法细节，请参阅 readme。",
|
||
"built with gradio": "基於 Gradio 建置",
|
||
"Built with Gradio": "使用 Gradio 构建",
|
||
"built-in": "内建的",
|
||
"Bulk process frames with chosen outfill method": "使用选定的填充方法批量處理截取的帧",
|
||
"Bump seed (If > 0 do a Compare Paths but only one image. No video will be generated.)": "提高种子值（如果大於 0，则进行对比变迁轨迹，但仅产生一张图像而非影片。）",
|
||
"Bump seed (If > 0 do a Compare Paths but only one image. No video)": "自动递增种子 (大於 0 的时候会对比变迁轨迹，但不会生成影片而是只是一张图)",
|
||
"button to free up memory.": " 按钮来释放显存",
|
||
"By comma": "逗号分组",
|
||
"By default and where supported, SVG-Edit can store your editor preferences and SVG content locally on your machine so you do not need to add these back each time you load SVG-Edit. If, for privacy reasons, you do not wish to store this information on your machine, you can change away from the default option below.": "预设情况下，SVG Edit 可以将设定和SVG图像储存在你的电脑上，因此你不需要在每次使用 SVG Edit 时重複设定。如果出於隐私因素，你不希望将资讯储存在你的电脑上，你可以更改以下预设选项。",
|
||
"By default, the algorithm tends to like dark images too much, if you think the output is too dark or not dark enough, you can adjust this ratio. 1 = ‘Do not darken at all’, 0 = ‘A totally black image is ok’, default = 0.9.": "预设情况下，演算法倾向於生成较黑的图像，如果你认为输出的图像太黑或不够黑，你可以调整最小照明比率。1=\"完全不变暗\"，0=\"全黑的图像\"，预设=0.9",
|
||
"By none": "不分组",
|
||
"By tokens": "词元分组",
|
||
"By vectors": "向量分组",
|
||
"By words": "单词分组",
|
||
"Cache FP16 weight for LoRA": "为 LoRA 缓存 FP16 权重",
|
||
"Cache gradio themes locally": "缓存 Gradio 主题到本地",
|
||
"Cache Latents": "缓存潜在变数",
|
||
"Cache LDSR model in memory": "将 LDSR 模型缓存在记忆体中",
|
||
"Cache the compiled models on disk for faster model load in subsequent launches (Recommended)": "将已编译模型缓存在磁碟上, 便於後续启动时更快地载入模型 (推荐开启)",
|
||
"Cadence": "节奏",
|
||
"Cafe Aesthetic": "Cafe 美学",
|
||
"cafe-aesthetic": "咖啡审美器",
|
||
"calculate dimension of LoRAs(It may take a few minutes if there are many LoRAs)": "计算 LoRA 维度 (取决於模型数量，可能需要数分钟)",
|
||
"Calculate hash": "计算杂凑值",
|
||
"Calculate hash for all checkpoint": "计算所有大模型的杂凑",
|
||
"Calculate Height": "计算高度",
|
||
"Calculate Split Loss": "计算分割损失",
|
||
"Calculate the optimal GIF palette, improves quality significantly, removes banding": "计算最优 GIF 色板，显着提升品质，消除条纹",
|
||
"Calculate training parameters for a human subject. Enables prior preservation.": "计算训练人物主体所需参数。将启用先验存留 (prior preservation)",
|
||
"Calculate training parameters for a non-human subject. Disables prior preservation.": "计算训练非人物主体所需参数。将停用先验存留(prior preservation)",
|
||
"Calculate Width": "计算宽度",
|
||
"Calculates aesthetic score for generated images using CLIP+MLP Aesthetic Score Predictor based on Chad Scorer": "为产生出来的图像计算其美学分数。基於 Chad Scorer 使用 CLIP+MLP 美学分数预测器",
|
||
"Camera Far": "镜头最远渲染距离",
|
||
"Camera Focal Length": "镜头焦距",
|
||
"Camera Near": "镜头最近渲染距离",
|
||
"Camera Parameters": "镜头参数",
|
||
"Can be empty, indicating no translation": "可以为空，表示无需翻译",
|
||
"Can be empty,indicating no translation": "可以为空，表示无需翻译",
|
||
"Cancel": "取消",
|
||
"Cancel Download": "取消下载",
|
||
"Cancel generate forever": "取消无限产生",
|
||
"Cancel training.": "取消训练",
|
||
"canny": "canny (硬边缘检测)",
|
||
"Canny": "Canny (硬边缘)",
|
||
"Canny high threshold": "强边缘判断阈值（Canny high threshold）",
|
||
"Canny low threshold": "弱边缘判断阈值（Canny low threshold）",
|
||
"Canvas Background Color": "画布背景颜色",
|
||
"Canvas Ground Color": "画布地面颜色",
|
||
"Canvas Height": "画布高度",
|
||
"Canvas Hotkeys": "画布热键",
|
||
"Canvas Width": "画布宽度",
|
||
"Caption": "生成标籤",
|
||
"Caption Backup File": "描述备份档案",
|
||
"Caption File Ext": "档案副档名",
|
||
"Caption max length": "描述最大长度",
|
||
"Caption min length": "描述最小长度",
|
||
"Caption of Selected Image": "被选图像的描述",
|
||
"Caption Text File": "描述文本档案",
|
||
"Caption type": "描述文本类型",
|
||
"Caption: Returns a string describing the image": "描述文本: 返回的用於描述图像的字串",
|
||
"Captions": "描述",
|
||
"Card height for Extra Networks": "额外网络的卡片高度",
|
||
"Card height for Extra Networks (px)": "扩展模型卡牌高度 (px)",
|
||
"Card text scale": "卡片文本大小",
|
||
"Card width for Extra Networks": "扩展模型卡片宽度",
|
||
"Card width for Extra Networks (px)": "扩展模型卡牌宽度 (px)",
|
||
"cards": "卡牌检视",
|
||
"Carriage Return": "Carriage Return (回车)",
|
||
"cartoon": "cartoon (卡通)",
|
||
"Cartoon": "卡通",
|
||
"cascadePSP": "CascadePSP",
|
||
"case sensitive": "区分大小写",
|
||
"Categorical mask status": "分类遮罩状态",
|
||
"Categorys of prompt": "提示词分类",
|
||
"Catppuccin Flavor": "Catppuccin 主题样式（背景颜色）",
|
||
"Catppuccin Theme": "Catppuccin 主题",
|
||
"Censor NSFW when NSFW is disabled": "当 NSFW 被禁用时过滤 NSFW 内容",
|
||
"Center Crop": "中心裁切",
|
||
"centered": "居中",
|
||
"CFG": "提示词相关性",
|
||
"Cfg Mode": "CFG 模式",
|
||
"cfg scale": "提示词相关性",
|
||
"CFG scale": "提示词相关性（CFG）",
|
||
"CFG Scale": "提示词相关性（CFG）",
|
||
"CFG scale (dynamic cfg: low,high:type e.g. 1.0-3.5:cos)": "提示词相关性（动态 CFG：low,high:type，例如 1.0-3.5:cos）",
|
||
"CFG Scale Combination": "提示词引导系数 (CFG Scale)",
|
||
"Cfg Scale Min": "CFG 最小值",
|
||
"CFG scale schedule": "CFG 系数调度计劃",
|
||
"cfg_scale": "提示词相关性（CFG）",
|
||
"Change brightness": "调节亮度",
|
||
"Change checkpoint": "切换模型权重存档点",
|
||
"Change contrast": "调节对比度",
|
||
"Change CTRL keybindings to SHIFT": "将 Ctrl 改成 Shift 按键",
|
||
"Change gain": "调节增强强度",
|
||
"Change gamma": "调节伽马",
|
||
"Change saturation": "调节饱和度",
|
||
"Change your brush width to make it thinner if you want to draw something.": "绘製内容前请先调整画笔粗细。",
|
||
"changeable blocks : BASE,IN00,IN01,IN02,IN03,IN04,IN05,IN06,IN07,IN08,IN09,IN10,IN11,M00,OUT00,OUT01,OUT02,OUT03,OUT04,OUT05,OUT06,OUT07,OUT08,OUT09,OUT10,OUT11": "可更改区块: \nBASE,IN00,IN01,IN02,IN03,IN04,IN05,IN06,IN07,IN08,IN09,IN10,IN11,M00,OUT00,OUT01,OUT02,OUT03,OUT04,OUT05,OUT06,OUT07,OUT08,OUT09,OUT10,OUT11",
|
||
"Changelog": "更新纪录",
|
||
"Changes are not applied to the text files until the \"Save all changes\" button is pressed.": "更改不会被套用至文本档案，直到 “储存所有更改” 按钮被按下",
|
||
"Chant filename": "Chant 档名",
|
||
"Chant filename (Chants are longer prompt presets)": "Chant 档名（Chant 指较长的提示词预设）",
|
||
"character": "character (角色)",
|
||
"Character Tags": "角色标籤(Tags)",
|
||
"Chat": "聊天",
|
||
"ChatGPT Model Name": "ChatGPT 模型名称",
|
||
"Cheap neural network approximation. Very fast compared to VAE, but produces pictures with 4 times smaller horizontal/vertical resolution and lower quality.": "低负载的神经网络近似值。与 VAE 相比非常快，但是生成的图像横向/纵向解析度为正常的四倍，品质较低。",
|
||
"Check Console log for Downloading Status": "检查控制台日誌以检视下载资讯",
|
||
"Check for updates": "检查更新",
|
||
"Check models' new version": "检查模型版本更新",
|
||
"Check models’ new version": "检索模型的新版本",
|
||
"Check New Version from Civitai": "从 Civitai 上检查版本更新",
|
||
"Check progress": "检视进度",
|
||
"Check Progress": "检视进度",
|
||
"Check progress (first)": "(首次)检视进度",
|
||
"Check similarity": "检查相似度",
|
||
"Check system info for validity": "检测系统资讯的有效性",
|
||
"Check tensors": "检测 tensors",
|
||
"check this box to enable guided images mode": "选中该项启用图像引导模式",
|
||
"Check this if you want to generate random prompts, even if your seed is fixed": "勾选此选项以在固定随机种子的情况下依然产生随机提示词",
|
||
"Checkbox": "核取方块",
|
||
"checkpoint": "模型",
|
||
"Checkpoint": "模型权重存档点",
|
||
"Checkpoint A": "大模型 A",
|
||
"Checkpoint B": "大模型 B",
|
||
"Checkpoint C": "大模型 C",
|
||
"Checkpoint Dropdown": "大模型下拉列表",
|
||
"Checkpoint dropdown: use filenames without paths": "模型下拉选单: 不显示模型对应子目录",
|
||
"Checkpoint format": "模型权重检查点格式",
|
||
"Checkpoint Format": "模型格式",
|
||
"Checkpoint Merger": "模型权重存档点合併",
|
||
"Checkpoint name": "模型权重存档点的名称",
|
||
"Checkpoint schedule": "模型表",
|
||
"Checkpoints": "模型权重存档点",
|
||
"Checkpoints to cache in RAM": "暂存在内存（RAM）中的模型权重存档点数",
|
||
"checks": "检测",
|
||
"Chess": "棋盘状",
|
||
"children's illustration": "children's illustration (儿童画作)",
|
||
"Choose a number of terms from a list, in this case we choose two artists:": "从列表中选幾项，这裡选了两个艺术家",
|
||
"choose an algorithm/ method for keeping color coherence across the animation": "选择一种演算法/方法来保持整个动画的颜色一致性",
|
||
"Choose latent sampling method": "选择潜在变数取样方法",
|
||
"Choose Min-max to activate these controls": "在评分过滤器选择 “最低-最高” 以启用控件",
|
||
"Choose mode:": "选择模式：",
|
||
"Choose preprocessor for semantic segmentation:": "选择语义分割的预處理器：",
|
||
"choose the frame interpolation engine and version": "选择帧插值引擎类型和版本",
|
||
"Choose which animation params are to be saved to the .srt file (Frame # and Seed will always be saved):": "选择要储存到 .srt 档案中的动画参数 (Frame # 和 Seed 将始终储存):",
|
||
"Choose your favorite mask:": "请选择你喜欢的遮罩：",
|
||
"chromatic": "色度",
|
||
"Chromatic": "色度",
|
||
"Cinematic": "Cinematic (电影)",
|
||
"circle": "圆形",
|
||
"City": "城市",
|
||
"CivitAI account settings": "CivitAI 账号设定",
|
||
"Civitai Browser+": "Civitai 浏览器+",
|
||
"CivitAI Browser+": "CivitAI 浏览器+",
|
||
"Civitai Helper": "Civitai 助手",
|
||
"CivitAI Tags": "CivitAI 标籤",
|
||
"Civitai URL": "Civitai 网址",
|
||
"Civitai URL or Model ID": "Civitai 地址或模型 ID",
|
||
"Class": "组件类别",
|
||
"Class Batch Size": "类别每批数量",
|
||
"Class Generation Schedulers": "类别(正则) 图像生成调度器",
|
||
"Class Image Generation": "生成类别(正则) 图像",
|
||
"Class Images Per Instance Image": "每个执行个体图像的类别(正则) 图像数量",
|
||
"Class prompt": "类别(Class)正向提示词",
|
||
"Class Prompt": "类别/正则提示词",
|
||
"Class Token": "类别/正则名称",
|
||
"Class Token + Description": "类别的词元(Token) + 描述",
|
||
"Class token(s) to swap, can be comma-separated": "要互换的类别的词元(Token)，可以是以英文逗号分割的",
|
||
"classic": "经典",
|
||
"Classification CFG Scale": "类别(正则) CFG比例",
|
||
"Classification Dataset Directory": "类别/正则数据集目录",
|
||
"Classification dataset directory (optional).": "分类(Classification)数据集目录（可选）",
|
||
"Classification Image Negative Prompt": "类别(正则) 图像反向提示词",
|
||
"Classification Steps": "类别(正则) 步骤",
|
||
"Classifier Free Guidance Scale - how strongly the image should conform to prompt - lower values produce more creative results": "无分类器指导讯息影响尺度（Classifier Free Guidance Scale）- 图像应在多大程度上服从提示词 - 较低的值会产生更有创意的结果",
|
||
"Classifier path": "分类器（Classifier）的路径",
|
||
"Classify type": "分类类型",
|
||
"Cleaner": "清理器",
|
||
"Cleaner Model ID": "清理器模型",
|
||
"Cleanup non-default temporary directory when starting webui": "在启动网页介面时清除非预设的暂存目录",
|
||
"Clear": "清除",
|
||
"Clear all": "清空全部",
|
||
"Clear ALL filters": "清除所有过滤器",
|
||
"Clear Cache": "清除缓存",
|
||
"Clear Images": "清空图像",
|
||
"Clear inputs": "清除输入",
|
||
"Clear prompt": "清除提示词",
|
||
"Clear selection": "清空选择",
|
||
"Clear tag filters": "标籤清除过滤器",
|
||
"Clear values": "清空数值",
|
||
"Click Enhance.": "点击“增强”按钮",
|
||
"Click Here": "点击这裡",
|
||
"Click here after the generation to show the video": "生成完成後点这裡显示影片",
|
||
"click here to gather relevant info": "点击此處以收集相关资讯",
|
||
"Click on the \"Generate Default Engines\" button. This step can take 2-10 min depending on your GPU. You can generate engines for other combinations.": "点击 “生成预设引擎” 按钮。此步骤可能需要 2 - 10 分钟，具体时间长短取决於 GPU。可使用其他组合生成引擎。",
|
||
"Click on the files that appear in the tree to edit them.": "选择下方列表中的档案来进行编辑",
|
||
"Click the search icon to load models.": "点击检索图标以载入模型资讯",
|
||
"click to download": "点击以下载",
|
||
"Click to Upload": "点选以上传",
|
||
"Clip and renormalize": "衰减与规格化",
|
||
"Clip and renormalize DepthMap": "剪下重构深度图",
|
||
"CLIP Interrogator on Github": "GitHub上的 CLIP Interrogator (CLIP 反推扩展)",
|
||
"CLIP Maximum length": "最小 CLIP 长度",
|
||
"CLIP Minimum length": "最小 CLIP 长度",
|
||
"CLiP model": "CLiP 模型",
|
||
"CLIP Model": "CLIP 模型",
|
||
"CLIP models:": "CLIP 模型:",
|
||
"Clip skip": "Clip 跳过层",
|
||
"Clip Skip": "Clip 跳过层",
|
||
"CLIP Skip": "CLIP 终止层数",
|
||
"Clip skip (2 if training anime model)": "CLIP 终止层数 (训练二次元模型时调至 2)",
|
||
"CLIP skip schedule": "CLIP 终止层数调度计劃",
|
||
"Clip skip:": "CLIP 终止层数:",
|
||
"CLIP tensors checker": "Clip tensors 检测",
|
||
"CLIP: maximum number of lines in text file": "CLIP: 文本档案的最大行数",
|
||
"CLIP: maximum number of lines in text file (0 = No limit)": "CLIP：文本档案中的最大行数（0 为无限制）",
|
||
"CLIP: skip inquire categories": "CLIP：跳过询问类别",
|
||
"CLIP: skip inquire categories: refresh": "CLIP: 跳过查询类别: 刷新",
|
||
"clip_threshold": "裁剪阈值",
|
||
"clipseg": "CLIP 分割",
|
||
"clipseg options": "CLIPSeg 选项",
|
||
"clone repositores": "克隆储存库",
|
||
"Close": "关闭",
|
||
"Close Preview": "关闭预览",
|
||
"Close the video": "关闭影片",
|
||
"Closed": "关闭",
|
||
"Closed loop": "闭环",
|
||
"Closer is brighter": "越近越亮",
|
||
"cloudscape": "cloudscape (云景)",
|
||
"cluster num": "簇数",
|
||
"Codec": "编码器",
|
||
"CodeFormer": "CodeFormer 更激进",
|
||
"Codeformer": "CodeFormer 更激进",
|
||
"CodeFormer vis.": "CodeFormer 可见程度",
|
||
"CodeFormer visibility": "CodeFormer 可见度",
|
||
"codeformer weight": "CodeFormer 强度",
|
||
"CodeFormer weight": "CodeFormer 强度",
|
||
"CodeFormer Weight": "CodeFormer 强度",
|
||
"CodeFormer weight (0 = maximum effect, 1 = minimum effect)": "CodeFormer 权重 （为 0 时效果最大，为 1 时效果最小）",
|
||
"CodeFormer weight parameter; 0 = maximum effect; 1 = minimum effect": "CodeFormer 强度参数; 0 = 效果最强; 1 = 效果最弱",
|
||
"CodeFormers (Face restoration)": "CodeFormers (脸部修复)",
|
||
"Coherence": "一致性",
|
||
"Coherence:": "一致性: ",
|
||
"Collect": "收藏 (储存)",
|
||
"Collection actions": "合集操作",
|
||
"Color": "色彩",
|
||
"Color coherence": "颜色一致性",
|
||
"Color coherence may be used with hybrid composite off, to just use video color.": "颜色一致性可以在混合合成关闭的情况下使用, 针对影片色彩",
|
||
"Color correction factor": "颜色校正系数",
|
||
"Color Fix": "颜色修正",
|
||
"Color force Grayscale": "强制颜色空间为灰度",
|
||
"Color Matcher Ref Image": "颜色匹配器参考图",
|
||
"Color Matcher Ref Image Type": "颜色匹配器参考图类型",
|
||
"color mode": "颜色模式",
|
||
"Color reduce algo": "色彩减弱演算法",
|
||
"Color sketch inpainting": "彩绘修复",
|
||
"Color Transfer Method": "颜色迁移演算法",
|
||
"Color variation": "色彩变化",
|
||
"Color:": "色调",
|
||
"color_burn": "加深颜色",
|
||
"color_coherence": "颜色一致性",
|
||
"color_coherence_video_every_N_frames": "每 N 帧校正影片颜色",
|
||
"color_dodge": "加亮颜色",
|
||
"colors": "色块",
|
||
"Comb": "梳理",
|
||
"Combat Cfg Drift": "Combat CFG 漂移",
|
||
"Combat Method": "Combat算法",
|
||
"Combinations": "组合",
|
||
"Combinatorial batches": "组合批次",
|
||
"Combinatorial generation": "组合生成",
|
||
"Combine axis": "拼合方向",
|
||
"Combine input and depthmap into one image": "原图和深度图拼合为一张",
|
||
"Combine interrogations": "合併反推",
|
||
"Combine into one image": "拼合为一张图像",
|
||
"Combine into one image.": "合併为一个图像",
|
||
"Combine LoCon, LORA & DoRA as one option": "将 LoCon, LORA 和 DoRA 合併为一个选项",
|
||
"Combined": "结合",
|
||
"ComfyUI install location": "ComfyUI 安装路径",
|
||
"ComfyUI server graceful termination timeout (in seconds) when reloading the gradio UI (-1 to block until the ComfyUI server exits normally)": "UI 重载时 ComfyUI 伺服器最长平稳退出时间限制 (秒) (-1 代表持续等待 ComfyUI 伺服器正常退出)",
|
||
"comma": "逗号",
|
||
"Comma separated face number(s)": "逗号分隔的脸部编号",
|
||
"Comma separated list": "以逗号分割的列表",
|
||
"Comma separated list OR * for all": "以逗号分隔的列表或以 * 代表全部",
|
||
"Comma separated list. Specify ckpt OR ckpt:word": "以逗号分割的列表。用以指定 ckpt 或 ckpt:字词",
|
||
"Comma-separated list of tab names; tabs listed here will appear in the extra networks UI first and in order lsited.": "以逗号分隔的页籤名称列表；在此列出的页籤将首先出现在额外网路的使用者介面中，并按照列出的顺序。",
|
||
"Comma-separated list of tags (\"artist, style, character, 2d, 3d...\")": "此模型的标记列表（\"artist, style, character, 2d, 3d...\"）",
|
||
"command": "指令",
|
||
"Commit": "提交",
|
||
"Common Tags": "原标籤 (Common Tags)",
|
||
"Comp alpha schedule": "透明度组合调度计劃",
|
||
"Comp mask auto contrast": "自动对比度合成遮罩",
|
||
"Comp mask auto contrast cutoff high schedule": "合成遮罩自动对比度隔离高值调度计劃",
|
||
"Comp mask auto contrast cutoff low schedule": "合成遮罩自动对比度隔离低值调度计劃",
|
||
"Comp mask blend alpha schedule": "合成遮罩透明度混合调度计劃",
|
||
"Comp mask contrast schedule": "合成遮罩对比度调度计劃",
|
||
"Comp mask equalize": "合成遮罩量化",
|
||
"Comp mask inverse": "合成遮罩反转",
|
||
"Comp mask type": "合成遮罩类型",
|
||
"Comp save extra frames": "储存合成过程所有额外帧",
|
||
"Compact prompt layout": "紧凑型提示词布局",
|
||
"Compare": "比较",
|
||
"Compare paths (Separate travels from 1st seed to each destination)": "对比变迁轨迹（从第一个种子分别变迁到每一个目标种子）",
|
||
"Compatibility": "相容性",
|
||
"Compatibility with ControlNet": "与 ControlNet 的兼容性",
|
||
"Compatibility with other extensions": "与其他扩展的兼容性",
|
||
"Compatible with Python v3.10.6 and WebUI v1.5.1.": "相容 Python v3.10.6 与 WebUI v1.5.1。",
|
||
"Compatible with Python v3.10.6 and WebUI v1.6.0.": "相容 Python v3.10.6 与 WebUI v1.6.0。",
|
||
"Complete documentation is available at https://github.com/adieyal/sd-dynamic-prompts. Please report any issues on GitHub.": "完整说明请在 https://github.com/adieyal/sd-dynamic-prompts 上取得。 任何问提请在 GitHub 上报告。",
|
||
"completed.": "步骤完成。",
|
||
"Component": "模型组件",
|
||
"Composable LoRA with step": "启用在迭代步数上使用LoRA或动态权重的功能",
|
||
"Composable Mask scheduling": "遮罩组合调度计劃",
|
||
"Composite audio files extracted from the original video onto the concatenated video.": "将原始影片中的音讯整合到生成的影片中。",
|
||
"Composite video with previous frame init image in": "前一帧初始图像的合成视频在",
|
||
"Compute on": "计算於",
|
||
"Compute Settings": "计算设定",
|
||
"Compute similarity": "计算相似度",
|
||
"Concatenate each frame while crossfading.": "在交叉融合运算时串联每一帧。",
|
||
"Concavity of distortion of circles": "圆形变形的凹凸程度",
|
||
"concept - Can be a concept, such as “a X of Y”, or an historical event such as “The Trojan War”.": "concept - 概念 - 可以是一种概念：例如一个事物的某种特质；或者是一个历史事件，例如 “特洛伊战争“ 。",
|
||
"Concept 1": "概念 1",
|
||
"Concept 2": "概念 2",
|
||
"Concept 3": "概念 3",
|
||
"Concept 4": "概念 4",
|
||
"Concepts": "概念",
|
||
"Concepts List": "概念列表",
|
||
"Concepts List (Overrides instance/class settings below)": "概念列表（将取代下面实例/类别这两项设定）",
|
||
"Cond. Image Mask Weight": "图像调节屏蔽度",
|
||
"Cond.fix: Disabled (none)": "条件修复：停用（无）",
|
||
"Cond.fix: Empty": "条件修复： 无",
|
||
"Cond.fix: Full": "条件修复： 完全",
|
||
"Cond.fix: High (recommended)": "条件修复： 高（推荐）",
|
||
"Cond.fix: Highest": "条件修复： 最高",
|
||
"Cond.fix: Low": "条件修复： 小",
|
||
"Cond.fix: Lowest": "条件修复： 最小",
|
||
"Cond.fix: Medium": "条件修复： 中",
|
||
"Conditionals": "条件",
|
||
"Conditioning Highres": "调整高解析度",
|
||
"Conditioning Highres.fix strength (for sd-v1-5-inpainting)": "高解析度修复原图调节强度（专为 sd-v1-5-inpainting 设计）",
|
||
"conditioning-highres-fix": "高解析度修复原图调节",
|
||
"config": "组态",
|
||
"Config Backup: Config": "组态备份：组态",
|
||
"Config file for Adapter models": "Adapter 模型组态档案路径",
|
||
"Config file for Control Net models": "ControlNet 模型组态档案路径",
|
||
"Config Name": "组态名",
|
||
"Config Presets": "预设组态",
|
||
"Config state file to restore from, under 'config-states/' folder": "用於还原的组态状态档案, 位於 'config-states/' 目录",
|
||
"Config-Presets": "组态预设值",
|
||
"configuration": "延伸模组设定",
|
||
"configuration for": "详细设定",
|
||
"Configure colors. See the Settings section in the README for more info. Must be valid JSON.": "组态颜色。更多资讯请检视 README 中的 \"Settings (设定)\" 部分。需要有效的 JSON。",
|
||
"Configure Hotkeys. For possible values, see https://www.w3.org/TR/uievents-key, or leave empty / set to 'None' to disable. Must be valid JSON.": "组态热键。对於可能的取值，请检视该网址: https://www.w3.org/TR/uievents-key ，留空或设定为 '无' 来停用。需要有效的 JSON。",
|
||
"Connect": "连缐",
|
||
"Connecting": "连缐中",
|
||
"Connection errored out.": "连缐出错",
|
||
"Consider a donation on ko-fi! :3": "考虑在 ko-fi 上为本延伸模组赞助! :3",
|
||
"Consistency mask blur": "一致性遮罩模糊",
|
||
"Console log tag counts per file, no progress bar": "逐档案在控制台输出标籤计数日誌 (无进度条)",
|
||
"Console logging": "控制台日誌记录",
|
||
"constant": "常数（constant）",
|
||
"Constant/Linear Starting Factor": "常数/缐性起始因子",
|
||
"constant_with_warmup": "含预热的常数（constant）",
|
||
"Containing directory": "目标模型目录",
|
||
"Content type:": "内容类别: ",
|
||
"Content Type:": "内容类别: ",
|
||
"Context batch size": "上下文单批数量",
|
||
"Contour": "轮廓",
|
||
"contrast": "对比度",
|
||
"Contrast": "对比度",
|
||
"Contrast Multiplier": "对比度倍数",
|
||
"Contrast schedule": "对比度调度计劃",
|
||
"Contrast:": "对比度",
|
||
"Contrasts cut level": "对比度切分水平",
|
||
"control animation mode, will hide non relevant params upon change": "动画控制模式，会在修改模式後自动隐藏不相关参数",
|
||
"Control Mode": "控制模式",
|
||
"Control Mode (Guess Mode)": "控制类型 (猜测模式)",
|
||
"Control Net Weight": "ControlNet 权重",
|
||
"Control Net Weight For Face": "ControlNet 脸部权重",
|
||
"Control Type": "控制类型",
|
||
"Control Weight": "控制权重",
|
||
"ControlNet Fastload": "ControlNet 快速组态",
|
||
"Controlnet Fastload Filter": "Controlnet Fastload 筛选器",
|
||
"Controlnet Fastload First": "Controlnet Fastload 优先",
|
||
"ControlNet Fastload Plugin First": "ControlNet Fastload 扩展优先",
|
||
"Controlnet First": "Controlnet 优先",
|
||
"ControlNet guidance end": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 2nd": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 3rd": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 4th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 5th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 6th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 7th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 8th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 9th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 10th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance start": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 2nd": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 3rd": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 4th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 5th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 6th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 7th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 8th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 9th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 10th": "ControlNet 引导介入时机",
|
||
"ControlNet Info": "ControlNet 资讯",
|
||
"ControlNet Inpaint": "ControlNet 重绘",
|
||
"ControlNet Inpaint Index": "ControlNet 重绘单元序号",
|
||
"ControlNet inpaint model index": "ControlNet 的 inpaint 模型启用单元页",
|
||
"ControlNet inpaint not masked": "ControlNet 重绘不使用遮罩",
|
||
"ControlNet Inpaint Number": "ControlNet 重绘序号",
|
||
"ControlNet inpainting Gaussian blur sigma": "ControlNet 重绘高斯模糊 Sigma",
|
||
"Controlnet input directory": "Controlnet输入目录",
|
||
"ControlNet input directory": "ControlNet 的输入目录",
|
||
"ControlNet Input Video Path": "ControlNet 输入影片路径",
|
||
"ControlNet Input Video/ Image Path": "ControlNet 输入 影片/图像 的路径",
|
||
"ControlNet Integrated": "ControlNet Integrated 控制网络",
|
||
"ControlNet is more important": "ControlNet更重要",
|
||
"ControlNet Mask Video Path": "ControlNet 影片遮罩路径",
|
||
"ControlNet Mask Video/ Image Path (*NOT WORKING, kept in UI for CN's devs testing!*)": "ControlNet 遮罩 影片/图像 的路径 (*暂时不可用, 保留在 UI 中方便 ControlNet 的开發测试*)",
|
||
"ControlNet model": "ControlNet 模型",
|
||
"ControlNet model 2nd": "ControlNet 模型",
|
||
"ControlNet model 3rd": "ControlNet 模型",
|
||
"ControlNet model 4th": "ControlNet 模型",
|
||
"ControlNet model 5th": "ControlNet 模型",
|
||
"ControlNet model 6th": "ControlNet 模型",
|
||
"ControlNet model 7th": "ControlNet 模型",
|
||
"ControlNet model 8th": "ControlNet 模型",
|
||
"ControlNet model 9th": "ControlNet 模型",
|
||
"ControlNet model 10th": "ControlNet 模型",
|
||
"ControlNet Model ID": "ControlNet 模型",
|
||
"ControlNet model index": "ControlNet 模型编号",
|
||
"ControlNet number": "ControlNet 单元序号",
|
||
"ControlNet option": "ControlNet 选项",
|
||
"ControlNet options": "ControlNet 选项",
|
||
"ControlNet Plugin First": "ControlNet 扩展优先",
|
||
"ControlNet Preprocessor": "ControlNet 预處理器",
|
||
"ControlNet Segmentation Index": "ControlNet 语义分割 Unit 序号",
|
||
"Controlnet tile model name": "Controlnet tile 模型名",
|
||
"ControlNet Unit 0": "ControlNet 单元 0",
|
||
"ControlNet Unit 1": "ControlNet 单元 1",
|
||
"ControlNet Unit 2": "ControlNet 单元 2",
|
||
"ControlNet Unit 3": "ControlNet 单元 3",
|
||
"ControlNet Unit 4": "ControlNet 单元 4",
|
||
"ControlNet Unit 5": "ControlNet 单元 5",
|
||
"ControlNet Unit 6": "ControlNet 单元 6",
|
||
"ControlNet Unit 7": "ControlNet 单元 7",
|
||
"ControlNet Unit 8": "ControlNet 单元 8",
|
||
"ControlNet Unit 9": "ControlNet 单元 9",
|
||
"ControlNet Video Input": "ControlNet 影片输入",
|
||
"ControlNet Video Mask Input": "ControlNet 影片遮罩输入",
|
||
"ControlNet weight": "ControlNet 权重",
|
||
"ControlNet weight 2nd": "ControlNet 权重",
|
||
"ControlNet weight 3rd": "ControlNet 权重",
|
||
"ControlNet weight 4th": "ControlNet 权重",
|
||
"ControlNet weight 5th": "ControlNet 权重",
|
||
"ControlNet weight 6th": "ControlNet 权重",
|
||
"ControlNet weight 7th": "ControlNet 权重",
|
||
"ControlNet weight 8th": "ControlNet 权重",
|
||
"ControlNet weight 9th": "ControlNet 权重",
|
||
"ControlNet weight 10th": "ControlNet 权重",
|
||
"controlnet: A neural network structure to control diffusion models by adding extra conditions. Check manual for setup info.": "ControlNet: 一种通过新增额外条件来控制扩散模型的神经网络结构。请检视手册了解如何设定。",
|
||
"controls for how many frames the same seed should stick before iterating to the next one": "控制在迭代到下一个新种子之前该种子应使用多少帧",
|
||
"controls pixel generation method for images smaller than the frame. hover on the options to see more info": "控制小於设定画布的图像的像素生成模式。滑鼠指针悬停在选项上以检视更多资讯",
|
||
"Controls the contrast of the composite mask. 0.5 if half, 1 is normal contrast, 2 is double, etc.": "控制合成遮罩的对比度。0.5为一半对比度，1为正常对比度，2为双倍对比度，以此类推。",
|
||
"controls the handling of pixels outside the field of view as they come into the scene": "选择视场外像素进入场景时的處理方式",
|
||
"Controls the maximum length in tokens of the generated prompt.": "按标记数控制已产生的提示词最大长度",
|
||
"controls the seed behavior that is used for animation. hover on the options to see more info": "控制用於製作动画的随机数种子行为。悬浮滑鼠指针在不同选项上检视更多资讯。",
|
||
"controls the seed behavior that is used for animation. Hover on the options to see more info": "控制用於製作动画的随机数种子行为。悬浮滑鼠指针在不同选项上检视更多资讯。",
|
||
"Controls the strength of the diffusion on the init image. 0 = disabled": "控制初始化图像生成器的强度。 0 = 停用",
|
||
"controls which sampler to use at a specific scheduled frame": "控制在特定调度计劃的帧使用什麼採样方法",
|
||
"convert": "转换",
|
||
"Convert": "转换",
|
||
"Convert a 360 spherical panorama to a 3D mesh": "将单张 360° 球形全景图转换为 3D 网格",
|
||
"Convert a single 2D image to a 3D mesh": "将单张 3D 图像转换为 3D 网格",
|
||
"Convert currently loaded checkpoint into ONNX. The conversion will fail catastrophically if TensorRT was used at any point prior to conversion, so you might have to restart webui before doing the conversion.": "将当前载入的 checkpoint 转换为 ONNX 模型。如果在转换前的任意时间载入了 TensorRT, 转换会失败。推荐在转换前重启 webui",
|
||
"Convert excessive brackets to weights": "多馀括号转换为权重",
|
||
"Convert Folder": "转换该目录",
|
||
"Convert models to fp16/bf16 no-ema/ema-only safetensors. Convert/copy/delete any parts of model: unet, text encoder(clip), vae.": "将模型转换为 fp16/bf16 no-ema/ema-only safetensors。转换/複製/删除模型的任何部分：unet，文字编码器（剪贴），vae。",
|
||
"Convert ONNX to TensorRT": "将 ONNX 模型转换为 TensorRT 模型",
|
||
"Convert spaces to underscores (default: underscore to spaces)": "空格转换为下劃缐 (预设: 下劃缐转换为空格)",
|
||
"Convert to ONNX": "转换为 ONNX 模型",
|
||
"Convert to TensorRT": "转换到 TensorRT",
|
||
"Convert Unet to ONNX": "转换 Unet 为 ONNX 模型",
|
||
"Converted checkpoints will be saved in your": "转换出的模型将会储存在你的",
|
||
"Converts all images in a folder to audio": "转换所选的图像目录内的图像为音讯",
|
||
"copy": "複製",
|
||
"Copy": "複製",
|
||
"Copy and Overwrite": "複製与覆写",
|
||
"Copy caption from selected images automatically": "自动从被选图像中複製描述",
|
||
"Copy collection": "複製选集",
|
||
"Copy config from": "複製组态自",
|
||
"Copy image to:": "複製图像到：",
|
||
"Copy main UI prompt to style.": "複製主介面的提示词到预设样式",
|
||
"Copy Metadata": "複製中继资料",
|
||
"Copy metadata from merged models": "从融合模型中複製元数据",
|
||
"Copy metadata to other models in directory": "複製中继资料至其他目录中的模型",
|
||
"Copy Metdata": "複製元数据",
|
||
"Copy or move captions together": "複製或一起移动描述文本档案",
|
||
"Copy path to clipboard": "将路径複製到剪贴簿",
|
||
"copy to clipboard": "複製到剪贴簿",
|
||
"Copy to ControlNet Inpainting": "複製到 ControlNet 重绘",
|
||
"Copy to ControlNet Segmentation": "複製到 ControlNet 语义分割",
|
||
"Copy to directory": "将图像複製到目标路径",
|
||
"Copy to favorites": "複製到收藏夹",
|
||
"Copy to Inpaint Upload & ControlNet Inpainting": "複製到区域重绘和 ControlNet 重绘",
|
||
"Copy to Inpaint Upload & img2img ControlNet Inpainting": "複製到区域重绘和图生图的 ControlNet 区域重绘",
|
||
"Copy to txt2img ControlNet Inpainting": "複製到文生图 ControlNet 重绘中",
|
||
"Copyright Tags": "版权标籤 (Tags)",
|
||
"cosine": "馀弦（cosine）",
|
||
"cosine_with_restarts": "含重启的馀弦（cosine）",
|
||
"Count of final steps to average together:": "用於平均的最终步数量：",
|
||
"Count tokens of enabled styles": "计入预设样式中的提示词词元长度",
|
||
"Country": "国家",
|
||
"Cover image": "封面图像",
|
||
"Cozy Image Browser": "Cozy 图库浏览器",
|
||
"Cozy Nest Image Browser": "Cozy Nest 图库浏览器",
|
||
"Craft Clay": "Craft Clay (手工粘土)",
|
||
"Create": "建立",
|
||
"create a gif in addition to .mp4 file. supports up to 30 fps, will self-disable at higher fps values": "除 MP4 档案外额外建立 GIF 档案。最高支援30帧，在更高的帧数设定下会自动停用本选项",
|
||
"Create a grid where images will have different parameters. Use inputs below to specify which parameters will be shared by columns and rows": "建立一个网格，图像将有不同的参数。使用下面的输入来指定哪些参数将由列和行共享",
|
||
"Create a new model.": "建立一个新的模型",
|
||
"Create a text file next to every image with generation parameters.": "储存图像时，在每个图像旁边建立一个文本档案储存生成参数",
|
||
"Create a text file with infotext next to every generated image": "在每张生成的图像旁建立包含生成资讯的文本档案",
|
||
"Create aesthetic embedding": "建立美学嵌入",
|
||
"Create aesthetic images embedding": "建立美术风格图集 Embedding",
|
||
"Create an aesthetic embedding out of any number of images": "从任意数量的图像中建立美学嵌入",
|
||
"Create an embedding from one or few pictures and use it to apply their style to generated images.": "用一张或多张图像建立一个 Embedding，并用它将图集的风格转移到要生成的图像上",
|
||
"Create an upscaled version of the current image using hires fix settings.": "使用高解析度修复设定建立当前图像的放大版本",
|
||
"Create animation": "建立动画",
|
||
"Create animation sequence from denoised intermediate steps.": "从降噪过程中的中间步骤建立动画序列。",
|
||
"Create blank canvas": "建立空白画布",
|
||
"Create classification images using training settings without training.": "不开启训练的情况下使用训练的参数设定建立类别图像。",
|
||
"Create debug image": "建立除错图像",
|
||
"Create embedding": "建立嵌入",
|
||
"Create flipped copies": "建立镜像副本",
|
||
"Create From Hub": "从 huggingface 建立",
|
||
"Create hypernetwork": "建立超网路（Hypernetwork）",
|
||
"Create images embedding": "建立图集嵌入",
|
||
"Create inspiration images": "建立灵感图像",
|
||
"Create mask": "建立遮罩",
|
||
"Create Mask": "建立遮罩",
|
||
"Create mask area": "建立遮罩区域",
|
||
"Create masks for img2img based on a depth estimation made by MiDaS.": "根据 MiDaS 的深度估计为图生图创建遮罩。",
|
||
"Create Model": "建立模型",
|
||
"Create New Canvas": "创建新画布",
|
||
"Create Project": "建立项目",
|
||
"Create the danged model already.": "建立一个本就很牛的模型",
|
||
"create time": "按建立时间",
|
||
"Create txt2img canvas": "建立文生图画布",
|
||
"create ui": "建立 UI",
|
||
"Create Version": "建立版本",
|
||
"Create your wildcard library by copying a collection using the dropdown below.": "通过使用下面的下拉列表複製一个集合来建立你的万用字元库",
|
||
"Create your wildcard library by copying a collection using the dropdown in the Collection actions.": "通过 \"合集操作\" 中下拉选单中的複製合集选项，建立万用字元库",
|
||
"Create zip archive when downloading multiple images": "下载多张图像时通过 zip 打包",
|
||
"Created at:": "建立时间：",
|
||
"Creates animation sequence from denoised intermediate steps with video frame interpolation to achieve desired animation duration": "利用视频插值从降噪过程的中间步骤图像中生成动画",
|
||
"CRF": "固定码率因子 (CRF)",
|
||
"crop": "裁剪",
|
||
"Crop and resize": "裁剪",
|
||
"Crop and Resize": "裁剪并调整大小",
|
||
"Crop ControlNet input image only when invoking upscale script.(If not chekced, ControlNet input image will also be cropped when invoking inpaint with inpaint area set to 'Only masked')": "仅当呼叫放大脚本时裁剪 ControlNet 输入图像 (若无检查, ControlNet 输入图像也会在呼叫重绘时重绘区域设定为 \"仅重绘遮罩内容\" 时被修剪)",
|
||
"Crop Images": "裁切图像",
|
||
"crop left coordinate": "左侧裁剪坐标",
|
||
"Crop thumbnail to square": "裁剪缩略图为正方形",
|
||
"Crop to fit": "裁剪以适应宽高比",
|
||
"crop top coordinate": "顶部裁剪坐标",
|
||
"Crop: top, left, bottom, right": "裁切：顶部，左侧，顶部，右侧",
|
||
"Crop_high": "裁剪高度",
|
||
"crop_n_layers": "分层层数",
|
||
"crop_n_points_downscale_factor": "分层採样点坍缩因子",
|
||
"crop_nms_thresh": "分层数量阈值",
|
||
"crop_overlap_ratio": "分层重叠度",
|
||
"Cropping": "裁切",
|
||
"crops_n_layers": "分层层数",
|
||
"Cross attention optimization": "Cross-Attention 最佳化方案",
|
||
"Cross-attention": "Cross-Attention 最佳化方案",
|
||
"Cross-Attention Visualizer": "Cross-Attention 可视化",
|
||
"Crossfade blend rate": "交叉融合强度",
|
||
"csv file with columns for filenames and prompts": "列有档名和提示词的 csv 档案",
|
||
"Ctrl + wheel": "Ctrl + 滚轮",
|
||
"Ctrl+up/down precision when editing (attention:1.1)": "编辑时使用 Ctrl + up/down 调整精度 (注意：1.1)",
|
||
"Ctrl+up/down precision when editing <extra networks:0.9>": "编辑时使用 Ctrl + up/down 调整精度 <额外网路：0.9>",
|
||
"Ctrl+up/down whitespace delimiters": "通过 Ctrl+Up/Down 控制的空白分隔符",
|
||
"Ctrl+up/down word delimiters": "可以使用 Ctrl + ↑/↓ 设定权重的\"提示词分隔符类型\"",
|
||
"Cubist": "Cubist (立体派)",
|
||
"CUDA Settings": "CUDA 设定",
|
||
"Current": "Current (当前/当前帧)",
|
||
"Current batch": "当前批次",
|
||
"Current Booru": "当前的 Booru",
|
||
"Current Cache": "当前缓存目录",
|
||
"Current Dataset to be trained": "当前训练所用数据集",
|
||
"Current Model": "当前模型",
|
||
"Current page": "当前页面",
|
||
"Current page:": "当前页面:",
|
||
"Current ranking": "当前评分",
|
||
"Current version": "当前版本",
|
||
"Currently only supports PNG from webui. Param from NovelAI soon.": "当前仅支援 webui 的 PNG 图像资讯 (NovelAI 的参数提取支援会尽快跟进)",
|
||
"currently selected model": "当前选择的模型",
|
||
"Custom Aria2 command line flags": "自订 Aria2 命令行参数",
|
||
"Custom code": "自订程式码",
|
||
"Custom color for invalid additional networks": "自订无效附加网络的颜色",
|
||
"Custom color of 0 weight": "权重为 0 时的自订颜色",
|
||
"Custom color of disabled dropdown": "已停用的下拉框的自订颜色",
|
||
"Custom color of disabled scripts": "已停用脚本的自订颜色",
|
||
"Custom color of enabled dropdown": "已启用的下拉框的自订颜色",
|
||
"Custom color of enabled scripts": "已启用脚本的自订颜色",
|
||
"Custom Config File": "自订组态档案",
|
||
"Custom Diffusion": "自订扩散",
|
||
"Custom Diffusion is, in short, finetuning-lite with TI, instead of tuning the whole model. Similar speed and memory requirements to TI and supposedly gives better results in less steps.": "简而言之，自订扩散是用 TI 的微调代替整个模型的微调。速度和记忆体需求类似 TI，并且在较少步骤内获得更好的结果。",
|
||
"Custom EXIF": "自订 EXIF 文本",
|
||
"custom fold": "自订目录",
|
||
"Custom height": "自订高度",
|
||
"Custom Model Name": "自定义模型名称",
|
||
"Custom Name (Optional)": "自订名称 （可选）",
|
||
"Custom parameters": "自订参数",
|
||
"Custom resolutions": "自订解析度",
|
||
"Custom save images location": "自订储存图像位置",
|
||
"Custom settings file": "自订设定档",
|
||
"Custom size": "自订尺寸",
|
||
"Custom Theme.": "自定义主题。",
|
||
"Custom VAE": "自订 VAE",
|
||
"Custom width": "自订宽度",
|
||
"custum name": "自订名称",
|
||
"Cut video in to segments": "影片剪辑成片段",
|
||
"Cut white margin from input": "从输入中剪下空白区域",
|
||
"Cutoff strongly.": "强效分隔",
|
||
"Cyan | Red": "青色 | 红色",
|
||
"Cycle BG": "轮转背景图",
|
||
"DAAM": "扩散注意力归因图（DAAM）",
|
||
"Daam script": "Daam 脚本",
|
||
"DAAM stands for Diffusion Attentive Attribution Maps. Enter the attention text (must be a string contained in the prompt) and run. An overlapping image with a heatmap for each attention will be generated along with the original image.": "DAAM 代表扩散注意力归因图（Diffusion Attentive Attribution Maps）。输入注意力文（必须是提示词中包含的字串）并执行。将生成一张与原始图像重叠的图像，每个注意力将附带一个热度图。",
|
||
"dark": "dark (暗黑)",
|
||
"darken": "变暗",
|
||
"Data directory": "资料目录",
|
||
"Database": "资料库",
|
||
"Dataset": "数据集",
|
||
"Dataset directory": "资料集目录",
|
||
"Dataset Directory": "执行个体图像数据目录",
|
||
"Dataset folder structure": "资料集目录结构",
|
||
"Dataset Images": "数据集图像",
|
||
"Dataset Load Settings": "数据集载入设定",
|
||
"Dataset size:": "数据集大小",
|
||
"Dataset Tag Editor": "数据集标记编辑器",
|
||
"date": "日期",
|
||
"Date": "日期",
|
||
"Date Created": "建立日期",
|
||
"Date Modified": "修改日期",
|
||
"Date Modified (newest first)": "修改日期 (优先最新)",
|
||
"Date Modified (oldest first)": "修改日期 (优先最旧)",
|
||
"Date to": "日期至",
|
||
"Date trained:": "训练日期:",
|
||
"Date:": "日期: ",
|
||
"db-storage1111": "资料库储存",
|
||
"Ddetailer Negative prompt": "检测反向提示词",
|
||
"Ddetailer Prompt": "检测正向提示词",
|
||
"DDIM": "DDIM（中，20~40步）",
|
||
"DDIM Eta": "DDIM 採样方法的 Eta 系数",
|
||
"DDPM": "DDPM（不）",
|
||
"de_DE Localization": "德语本地化语言包",
|
||
"debug": "侦错",
|
||
"Debug": "侦错",
|
||
"Debug Buckets": "除错",
|
||
"Debug info": "侦错资讯",
|
||
"Debug Infos": "侦错资讯",
|
||
"Debug level": "侦错等级",
|
||
"Debug log": "侦错日誌",
|
||
"Debug Mode 🡢 debug": "侦错模式 🡢 debug",
|
||
"Decode CFG scale": "解码提示词相关性",
|
||
"Decode steps": "解码叠代步数",
|
||
"Decoder Tile Size": "解码器分块尺寸",
|
||
"Dedicated negative prompt": "专门的负面提示词",
|
||
"deepbooru: escape () brackets": "deepbooru: 转义 (\\) 括号",
|
||
"deepbooru: escape (\\) brackets": "deepbooru: 转义 (\\) 括号",
|
||
"deepbooru: filter out those tags": "deepbooru: 过滤以下标籤",
|
||
"deepbooru: score threshold": "deepbooru: 评分阈值",
|
||
"deepbooru: sort tags alphabetically": "deepbooru: 按字母顺序排序标籤",
|
||
"deepbooru: use spaces in tags": "deepbooru: 在标籤间使用空格",
|
||
"deepfashion2_yolov8s-seg.pt": "deepfashion2_yolov8s-seg.pt (写实 服装)",
|
||
"default": "预设",
|
||
"Default": "预设",
|
||
"Default cropped image output directory": "裁切後的成品的预设输出目录",
|
||
"Default Image CFG": "预设图像引导系数 (CFG)",
|
||
"Default Input Batch Output Directory": "预设批量汇入输出档案目录",
|
||
"default LoRA multiplier": "预设 LoRA 强度倍率",
|
||
"Default magic prompt model": "预设魔法提示词模型",
|
||
"Default multiplier for extra networks": "扩展模型的预设强度倍率",
|
||
"Default Options Button": "预设选项按钮",
|
||
"Default order field for Extra Networks cards": "扩展模型卡片预设排序方式",
|
||
"Default order for Extra Networks cards": "扩展模型卡片预设数据排序方式",
|
||
"Default order:": "预设排序: ",
|
||
"Default Out Batches": "预设输出批次数",
|
||
"Default Sampler": "预设採样方法(Sampler)",
|
||
"Default scoring type": "预设评分类型",
|
||
"Default Sort": "预设排序",
|
||
"Default Steps": "预设迭代步数(Steps)",
|
||
"Default sub folders": "预设子目录",
|
||
"Default Text CFG": "预设文本引导系数(CFG)",
|
||
"Default Upscaled swapper color corrections (requires restart)": "预设放大变换结果时校正颜色 (需重启)",
|
||
"Default Upscaled swapper face restorer (requires restart)": "预设放大变换脸部修复模型 (需重启)",
|
||
"Default Upscaled swapper face restorer visibility (requires restart)": "预设放大变换脸部修复可见程度 (需重启)",
|
||
"Default Upscaled swapper face restorer weight (codeformer) (requires restart)": "预设放大变换脸部修复权重 (CodeFormer) (需重启)",
|
||
"Default Upscaled swapper mask erosion factor, 1 = default behaviour. The larger it is, the more blur is applied around the face. Too large and the facial change is no longer visible. (requires restart)": "预设放大变换遮罩腐蚀系数，1 = 预设行为。系数越大面部周围越模糊。若过大则脸部变换不明显 (需重启)",
|
||
"Default Upscaled swapper sharpen": "预设放大变换结果时锐化",
|
||
"Default Upscaled swapper upscaler (Recommanded : LDSR but slow) (requires restart)": "预设放大变换结果的放大演算法 (推荐: LDSR, 但可能有点慢) (需重启)",
|
||
"Default upscaler for image resize operations": "预设图像缩放演算法",
|
||
"Default Use improved segmented mask (use pastenet to mask only the face) (requires restart)": "预设使用改进的分割遮罩 (仅对面部使用 pastenet 遮罩) (需重启)",
|
||
"default variables: in \\{\\}, like \\{init_mask\\}, \\{video_mask\\}, \\{everywhere\\}": "预设变数：\\{\\}，比如 \\{init_mask\\}, \\{video_mask\\}, \\{everywhere\\}",
|
||
"default variables: in {}, like {init_mask}, {video_mask}, {everywhere}": "预设变数：\\{\\}，比如 \\{init_mask\\}, \\{video_mask\\}, \\{everywhere\\}",
|
||
"Default view for Extra Networks": "额外网络的预设视图",
|
||
"Default width for the Extra Networks directory tree view": "扩展模型树状目录检视的预设宽度",
|
||
"Defaults": "预设设定",
|
||
"defines the seed behavior that is used for animations": "定义用於製作动画的随机数种子行为",
|
||
"deforum-for-automatic1111-webui": "Deforum",
|
||
"Deforum-webui (use tab extension instead!)": "Deforum-webui (请使用页籤上的扩展版本)",
|
||
"delete": "删除",
|
||
"Delete": "删除",
|
||
"Delete 0-entries from exif cache": "从 EXIF 缓存删除 0-entries",
|
||
"Delete All Inputframes": "删除全部输入帧",
|
||
"Delete all preview image": "删除所有预览图像",
|
||
"Delete all wildcards": "删除全部万用字元",
|
||
"DELETE cannot be undone. The files will be deleted completely.": "删除操作无法撤销，档案会被完全删除。",
|
||
"DELETE File(s)": "删除档案",
|
||
"Delete Imgs": "删除图像",
|
||
"Delete intermediate": "删除临时档案",
|
||
"Delete intermediate frames after GIF generation": "生成 GIF 後删除临时帧图像",
|
||
"Delete known junk data": "删除已知垃圾数据",
|
||
"Delete list(-1 for all)": "删除列表（全删填-1）",
|
||
"Delete Model": "删除模型",
|
||
"delete next": "删除後 N 张",
|
||
"Delete old version after download": "下载完成後删除旧版本",
|
||
"Delete old version(s) after download": "下载後删除旧版本",
|
||
"delete or keep raw affected (interpolated/ upscaled depending on the UI section) png imgs": "删除或保留受影响的原始 (根据 UI 设定进行插值/放大) PNG 图像",
|
||
"Delete Selected Skeleton (D key)": "删除选中骨架 (D 键)",
|
||
"Delete Style": "删除样式",
|
||
"DemonCrawl Avatar Generator": "DemonCrawl 头像生成器",
|
||
"Denoise": "重绘幅度",
|
||
"Denoise change:": "降噪变化：",
|
||
"Denoise Change:": "降噪变化：",
|
||
"Denoise strength": "重绘幅度",
|
||
"Denoised": "已降噪",
|
||
"Denoising": "重绘幅度",
|
||
"Denoising Diffusion Implicit Models - best at inpainting": "Denoising Diffusion Implicit models - 最擅长区域重绘",
|
||
"Denoising strenght": "重绘幅度",
|
||
"Denoising strength": "重绘幅度",
|
||
"Denoising strength (Inpaint)": "区域重绘幅度",
|
||
"Denoising strength change factor": "重绘幅度的调整系数",
|
||
"Denoising strength curve": "降噪强度曲缐",
|
||
"Denoising strength for face images": "脸部重绘幅度",
|
||
"Denoising strength for the entire image": "全图重绘幅度",
|
||
"Denoising strength webui": "webui 重绘幅度",
|
||
"denoising_strength": "重绘幅度",
|
||
"Depth": "Depth (深度)",
|
||
"Depth (Midas/Adabins)": "深度模式 (Midas / Adabins)",
|
||
"Depth Algorithm": "深度演算法",
|
||
"Depth aware img2img mask": "深度感知图生图遮罩",
|
||
"Depth Image I/O": "深度影像输入/输出",
|
||
"Depth Library": "深度图图库",
|
||
"Depth Map": "深度图",
|
||
"Depth Maps": "深度图",
|
||
"Depth Maps, Stereo Image, 3D Mesh and Video generator extension.": "深度图、立体图像、3D网格和影片生成器延伸模组。",
|
||
"Depth Output": "深度图输出",
|
||
"Depth Prediction": "深度估计预處理",
|
||
"Depth Prediction demo": "深度估计预處理 Demo",
|
||
"Depth Warping & FOV": "深度变形 & 可视範围",
|
||
"depth_anything": "Depth Anything",
|
||
"depth_hand_refiner": "depth_hand_refiner (深度手部细化)",
|
||
"depth_leres": "depth_leres (LeReS 深度图估算)",
|
||
"depth_leres++": "depth_leres++ (LeReS 深度图估算++)",
|
||
"depth_marigold": "Marigold Depth 高精度深度图",
|
||
"depth_midas": "depth_midas (MiDaS 深度图估算)",
|
||
"depth_zoe": "depth_zoe (ZoeDepth 结合相对和绝对深度)",
|
||
"depthmap2mask": "深度图生遮罩",
|
||
"Descending": "降序",
|
||
"Description": "描述",
|
||
"description-based:": "基於描述：",
|
||
"deselect all": "取消全选",
|
||
"Deselect visible tags": "取消选择可见标籤",
|
||
"Dest Path": "目标路径",
|
||
"Destination directory": "目标目录",
|
||
"Destination Directory": "目标目录",
|
||
"Destination seed(s) (Comma separated)": "目标种子（逗号分割）",
|
||
"det_size : Size of the detection area for face analysis. Higher values may improve quality but reduce speed. Low value may improve detection of very large face.": "det_size : 脸部分析检测区域的大小。更高的数值可提高品质但降低速度。较低的数值可在改进非常大的脸部的检测",
|
||
"det_thresh : Face Detection threshold": "det_thresh : 脸部检测阈值",
|
||
"Detail, Blur, Smooth, Contour:": "细节，模糊，柔度，轮廓：",
|
||
"Detailed": "详细设定",
|
||
"Detailed Save As": "详细储存为",
|
||
"Details": "详细设定",
|
||
"Detect from image": "从图像侦测",
|
||
"Detect from Image": "从图像中提取",
|
||
"Detection": "检测",
|
||
"Detection confidence threshold % (A)": "检测置信阈值 % (A)",
|
||
"Detection confidence threshold % (B)": "检测置信阈值 % (B)",
|
||
"Detection Detailer": "检测细緻化",
|
||
"Detection model confidence threshold": "检测模型置信阈值",
|
||
"Detection model confidence threshold %": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold % 2nd": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold % 3rd": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold % 4th": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold % 5th": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 2nd": "检测模型置信阈值",
|
||
"Detection model confidence threshold 3rd": "检测模型置信阈值",
|
||
"Detection model confidence threshold 4th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 5th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 6th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 7th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 8th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 9th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 10th": "检测模型置信阈值",
|
||
"Detection threshold": "检测阈值",
|
||
"Determines how little respect the algorithm should have for image's content. At 0, nothing will change, and at 1 you'll get an unrelated image. With values below 1.0, processing will take less steps than the Sampling Steps slider specifies.": "决定演算法对图像内容的影响程度。设定 0 时，什麼都不会改变，而在 1 时，你将获得不相关的图像。\n值低於 1.0 时，處理的叠代步数将少於「取样叠代步数」滑桿指定的步数",
|
||
"deterministic": "确定",
|
||
"Deterministic": "确定性的训练",
|
||
"Device Info": "装置资讯",
|
||
"Device precision type": "装置执行精度类型",
|
||
"DH Patch": "DH 更新档",
|
||
"difference": "差异化",
|
||
"Difference": "差分",
|
||
"different": "差异",
|
||
"Diffuse the first frame based on an image, similar to img2img.": "基於图像生成第一帧，类似於图生图",
|
||
"diffusers default": "diffusers 预设",
|
||
"Diffusers LoRA loading variant": "Diffusers LoRA 载入变种",
|
||
"Diffusers model loading variant": "Diffusers 大模型载入变种",
|
||
"Diffusers pipeline": "Diffusers 管缐",
|
||
"Diffusers Settings": "Diffusers 设定",
|
||
"Diffusers VAE loading variant": "Diffusers VAE 载入变种",
|
||
"Diffusion Defender": "扩散防御者",
|
||
"Diffusion Weights (training snapshots)": "Diffusion 权重 (训练快照)",
|
||
"Digital Art": "Digital Art (数字艺术)",
|
||
"Dilation factor (A)": "扩张(Dilation)因子 (A)",
|
||
"Dilation factor (B)": "扩张因子 (B)",
|
||
"Dimension lower bound": "次元下限",
|
||
"Dimension upper bound": "次元上限",
|
||
"dimensions": "解析度",
|
||
"Directly Draw Scribbles": "直接绘製缐稿",
|
||
"Directories": "目录",
|
||
"Directory containing your image files": "你需要處理的图像目录",
|
||
"Directory for batch input images": "批量汇入图像的档案目录",
|
||
"Directory for detected maps auto saving": "检测图的自动储存目录",
|
||
"Directory for saving images using the Save button": "使用「储存」按钮储存图像的目录",
|
||
"Directory for saving init images when using img2img": "图生图初始图像的储存目录",
|
||
"Directory for temporary images; leave empty for default": "暂存影像的目录；留空以使用预设值",
|
||
"Directory name pattern": "目录名称格式",
|
||
"Directory path": "目录路径",
|
||
"directory.": "目录。",
|
||
"Dirs": "Dirs (目录)",
|
||
"Disable": "停用",
|
||
"Disable all extensions": "停用所有扩充功能",
|
||
"Disable all extensions (preserves the list of disabled extensions)": "停用全部扩展 (保留原本已停用扩展的列表)",
|
||
"Disable Async DNS for Aria2": "停用 Aria2 的异步 DNS",
|
||
"Disable at the last loopback time": "最後一次回送时停用",
|
||
"Disable built-in Lora handler": "停用内建 Lora 處理器",
|
||
"Disable Class Matching": "停用类别符合",
|
||
"Disable control type selection": "停用控制类型筛选",
|
||
"disable convert 'AND' to 'BREAK'": "不再将 \"AND \"转换为 \"BREAK\"",
|
||
"Disable de-duplication of wildcards before processing.": "處理前停用万用字元去重",
|
||
"Disable during hires pass": "在高解析度修复过程中停用",
|
||
"Disable dynamic prompts by unchecking this box.": "取消勾选以停用动态提示词",
|
||
"Disable feedback": "停止反馈",
|
||
"Disable for Negative prompt.": "为反向提示词停用本延伸模组效果",
|
||
"Disable function that you don't use": "停用不想使用的功能",
|
||
"Disable image browser (Reload UI required)": "停用 Cozy 图库浏览器 (需重启UI)",
|
||
"Disable image browser (requires reload UI)": "停用 Cozy 图库浏览器 (需要重启)",
|
||
"Disable image generation. Useful if you only want to generate text prompts.": "停用图像生成。如果你只想生成文本提示词的话",
|
||
"Disable image generation. Useful if you only want to generate text prompts. (1 image will still be generated to keep Auto1111 happy.).": "停用图像产生。这很有用，如果你只想产生文字提示。（仍将生成 1 张图像以使 Auto1111 保持执行）",
|
||
"Disable LCM": "停用 LCM",
|
||
"Disable Logging": "停用输出日誌",
|
||
"Disable memmapping for loading .safetensors files.": "载入 .safetensors 档案时停用记忆体映射",
|
||
"Disable negative prompt": "停用反向提示词",
|
||
"Disable openpose edit": "停用 openpose 姿态编辑",
|
||
"Disable photopea edit": "停用 photopea 缐上编辑器",
|
||
"Disable postprocessing operations in extras tab": "在 “後期處理” 页籤中停用的後期處理的功能操作",
|
||
"Disable prompt token counters": "停用提示词词元长度计数器",
|
||
"Disable sorting of wildcards before processing.": "處理前停用万用字元排序",
|
||
"Disable these extensions": "停用这些扩展",
|
||
"Disable waves and gradiant background": "停用波纹和背景渐变效果",
|
||
"Disable waves and gradiant background animations": "停用波纹和背景渐变动画",
|
||
"disabled": "停用",
|
||
"Disabled": "已停用",
|
||
"Disabled for batch input images": "批量汇入图像时停用",
|
||
"Disabled when launched with --hide-ui-dir-config.": "启动 --hide-ui-dir-config 时停用",
|
||
"Disables logging (graphs), may cause minor performance improvements.": "停用输出日誌 (图表) ，也许能略微提升性能。",
|
||
"Disallow usage of checkpoints in ckpt format": "不允许载入 ckpt 格式模型",
|
||
"Disallow usage of models in ckpt format": "不允许使用 ckpt 格式模型",
|
||
"discard": "丢弃",
|
||
"Discard": "丢弃",
|
||
"Discard images with low similarity or no faces :": "丢弃低相似度或不含脸部的图像: ",
|
||
"Discard weights with matching name": "丢弃名称相符的权重",
|
||
"Discard: remove style text from prompt, keep styles dropdown as it is.": "丢弃: 从提示词中删除对应预设样式文本, 并保持预设样式下拉选单不变",
|
||
"Disco": "Disco (迪斯科)",
|
||
"Discord - Dynamic Rich Presence": "Discord 动态状态讯息",
|
||
"Discord Rich Presence": "Discord 丰富存在",
|
||
"discord server": " Discord 伺服器",
|
||
"Discussion Board": "讨论板",
|
||
"Discussions": "讨论串",
|
||
"Disliked images": "不喜欢的图像",
|
||
"Dismiss": "屏蔽",
|
||
"display both english and target language": "同时显示原文与翻译",
|
||
"Display information dialog on Cozy Nest error": "显示 Cozy Nest 的资讯对话框",
|
||
"Display loop number": "显示循环数量",
|
||
"Display loop number (0 = infinite loop)": "显示循环数 (0 = 无限循环)",
|
||
"Display mode:": "显示模式：",
|
||
"Display Name": "显示名称",
|
||
"Display name for this model": "此模型的显示名称",
|
||
"Displays autocompletion hints for tags from image booru boards such as Danbooru. Uses local tag CSV files and includes a config for customization.": "显示来自图像板块（如 Danbooru）的标记自动补齐。使用本地标记CSV 档案，并包含可用於自定义组态的档案",
|
||
"Disregard checkpoint information from pasted infotext": "忽略贴上的生成资讯文本中的 Stable Diffusion 模型资讯",
|
||
"Disregard fields from pasted infotext": "忽略的粘贴板生成资讯文本字段",
|
||
"dithering": "抖动 (dithering)",
|
||
"Divergence (3D effect)": "發散性（3D 效果）",
|
||
"Divide cards by date": "按日期劃分卡片",
|
||
"Divide mode": "分割模式",
|
||
"Divide Ratio": "分割比率",
|
||
"Divisions": "分割",
|
||
"Divisive Norm Multiplier": "Divisive Norm 分裂倍数",
|
||
"Divisive Norm Size": "Divisive Norm 分裂大小",
|
||
"Do not add watermark to images": "不在图像上新增水印",
|
||
"Do not append detectmap to output": "不要将检测图附加到输出目录",
|
||
"Do not apply ControlNet during highres fix": "高解析度修复过程中不套用 ControlNet",
|
||
"Do not do anything special": "什麼都不做",
|
||
"Do not fix prompt schedule for second order samplers.": "不为二阶採样方法修复提示词作用时间",
|
||
"Do not make DPM++ SDE deterministic across different batch sizes.": "不要使 DPM++ SDE 在不同的批次大小之间具有确定性。",
|
||
"Do not optimize attention layers": "无最佳化",
|
||
"Do not resize images": "不要调整影像大小",
|
||
"Do not save grids consisting of one picture": "只有一张图像时不要储存宫格图",
|
||
"Do not save heatmap images": "不储存热度图",
|
||
"Do not show any images in gallery": "不在画廊中显示任何图像",
|
||
"Do not show any images in results for web": "不在网页的结果中显示任何图像",
|
||
"Do not store my preferences or SVG content locally": "不在本地储存设定和SVG图像",
|
||
"Do not upload here until bugfix": "在错误完全修复前不要在此處上传",
|
||
"Do not use this option if you have made changes with the metadata editor without backing up your data!!": "如果在未备份的情况下使用编辑器对元数据进行了更改，则不要勾选此选项！",
|
||
"doc": "文档",
|
||
"Dolly": "希区柯克（推轨变焦）",
|
||
"Dominant image color": "图像主色",
|
||
"Don't": "不要",
|
||
"Don't apply to negative prompts": "不用於反向提示词。",
|
||
"Don't cache latents": "不缓存潜变数",
|
||
"Don't Cache Latents": "不缓存潜变数",
|
||
"Don't checkpoint the gradients, Duh. Set to False to slightly increase speed at the cost of a bit of VRAM.": "储存权重进度时不要储存梯度，啊不废话。设定为 False 以消耗一点显存(VRAM)为代价略微提高速度",
|
||
"don't delete upscaled imgs": "不删除放大前的图像",
|
||
"Don't generate images": "不产生图像",
|
||
"Don't generate, only upscale": "不生成，仅放大",
|
||
"Don't Interrupt in the middle": "不中断生成中的图像",
|
||
"Don't outfill": "不进行填充",
|
||
"Don't Override": "不覆盖",
|
||
"Don't re-scan for wildcard files when pressing the extra networks refresh button": "按下扩展模型刷新按钮时, 不重新扫描万用字元档案",
|
||
"Don't use LoRA in uc if there're no subprompts": "如果没有使用「AND」语法不要在反向提示词中使用LoRA",
|
||
"Don't use prompt magic on negative prompts.": "不要对反向提示词使用提示词魔法。",
|
||
"Don’t use wierd blocky upscale mode. Or maybe do?": "不要用 \"糟糕的分块放大模式\" ，或者也许可以试试？",
|
||
"dot size": "点大小",
|
||
"double-straight-line": "双直缐",
|
||
"down": "下",
|
||
"Downcast model alphas_cumprod to fp16 before sampling. For reproducing old seeds.": "采样前将模型 alphas_cumprod 向下转换为 FP16, 用於复现旧的种子结果",
|
||
"Download": "下载",
|
||
"Download All files": "下载所有档案",
|
||
"Download configuration files from CivitAI": "从 CivitAI 下载组态档案",
|
||
"Download Example Images Locally": "在本地下载範例图像",
|
||
"Download folder:": "下载目录: ",
|
||
"Download Folder:": "下载目录: ",
|
||
"Download Link": "下载网址",
|
||
"Download localization template": "下载本地化模板",
|
||
"Download Max Size Preview": "下载最大尺寸预览图",
|
||
"Download missing activation triggers on startup": "启动时下载缺失的启用触發词",
|
||
"Download missing models upon reading generation parameters from prompt": "从生成参数中的提示词读取并下载缺失的模型",
|
||
"Download missing preview images on startup": "启动时下载缺失的模型预览图",
|
||
"Download model": "下载模型",
|
||
"Download Model": "下载模型",
|
||
"Download models using Aria2": "使用 Aria2 下载模型",
|
||
"Download NSFW (adult) preview images": "允许下载含成人内容的预览图",
|
||
"Download path": "下载路径",
|
||
"Download Queue": "下载伫列",
|
||
"Download system info": "下载系统资讯",
|
||
"Download the pose as .json file": "以 .json 格式储存姿态图",
|
||
"Downloads": "下载",
|
||
"Downscale After Skip": "跳过後缩小",
|
||
"Downscale Factor": "缩小系数",
|
||
"Downscale Method": "缩小演算法",
|
||
"Downscaling": "缩小",
|
||
"DPM adaptive": "DPM adaptive（最慢，自适应，忽略步数）",
|
||
"DPM fast": "DPM fast（不）",
|
||
"DPM++ 2M": "DPM++ 2M（不）",
|
||
"DPM++ 2M Karras": "DPM++ 2M Karras（推，20步，快好收,Forge）",
|
||
"DPM++ 2M SDE": "DPM++ 2M SDE（不）",
|
||
"DPM++ 2M SDE Exponential": "DPM++ 2M SDE Exponential（中，柔少）",
|
||
"DPM++ 2M SDE Heun": "DPM++ 2M SDE Heun（不）",
|
||
"DPM++ 2M SDE Heun Exponential": "DPM++ 2M SDE Heun Exponential（不）",
|
||
"DPM++ 2M SDE Heun Karras": "DPM++ 2M SDE Heun Karras（不）",
|
||
"DPM++ 2M SDE Karras": "DPM++ 2M SDE Karras（可，30步，Fooocus）",
|
||
"DPM++ 2S a": "DPM++ 2S a（不）",
|
||
"DPM++ 2S a Karras": "DPM++ 2S a Karras（不）",
|
||
"DPM++ 3M SDE": "DPM++ 3M SDE（不）",
|
||
"DPM++ 3M SDE Exponential": "DPM++ 3M SDE Exponential（可，40步低CFG）",
|
||
"DPM++ 3M SDE Karras": "DPM++ 3M SDE Karras（可，30步低CFG）",
|
||
"DPM++ SDE": "DPM++ SDE（不）",
|
||
"DPM++ SDE Karras": "DPM++ SDE Karras（中，20+步，慢好不收）",
|
||
"DPM2": "DPM2（不）",
|
||
"DPM2 a": "DPM2 a（不）",
|
||
"DPM2 a Karras": "DPM2 a Karras（不）",
|
||
"DPM2 Karras": "DPM2 Karras（不）",
|
||
"Drag Me": "拖动页面",
|
||
"Draw a mask over an image, and the script will regenerate the masked area with content according to prompt": "在图像上画一个遮罩，脚本会根据提示重新生成遮罩区域的内容",
|
||
"Draw full canvas background": "绘製完整的画布背景",
|
||
"Draw legend": "在图表中包括轴类型和值",
|
||
"Draw Legends": "包含图例註释",
|
||
"Draw mask": "绘製遮罩",
|
||
"Draw region + show mask": "绘製区域和显示遮罩",
|
||
"Drawing": "绘画",
|
||
"Drawing Canvas": "建立画布",
|
||
"DreamArtist": "梦想家（DreamArtist）",
|
||
"DreamArtist Create embedding": "梦想家（DreamArtist）创建嵌入",
|
||
"DreamArtist Train": "梦想家（DreamArtist）训练",
|
||
"DreamArtist-sd-webui-extension": "梦作家",
|
||
"Dreambooth training based on Shivam Shiaro's repo, optimized for lower-VRAM GPUs.": "基於 Shivam Shiaro 的程式码移植的 Dreambooth 训练，为低 VRAM 显示卡做了优化",
|
||
"Dreamscape": "Dreamscape (梦境)",
|
||
"Drop File Here": "拖曳档案到此",
|
||
"Drop Image Here": "拖曳图像到此",
|
||
"Drop out tags when creating prompts.": "在建立提示时删除标籤",
|
||
"Drop tabs here to hide them": "把页籤拖到此處隐藏它们",
|
||
"Drop Video Here": "拖曳影片到此",
|
||
"dropdown": "下拉式清单",
|
||
"Dropdown": "下拉式清单",
|
||
"Dropout tags when create texts": "建立文本时随机丢弃一些标籤",
|
||
"Dry Run": "空执行",
|
||
"Due to ControlNet base extension's inner works it needs its models to be located at 'extensions/deforum-for-automatic1111-webui/models'. So copy, symlink or move them there until a more elegant solution is found. And, as of now, it requires use_init checked for the first run. The ControlNet extension version used in the dev process is a24089a62e70a7fae44b7bf35b51fd584dd55e25, if even with all the other options above used it still breaks, upgrade/downgrade your CN version to this one.": "因为 ControlNet 基层延伸模组在内工作，所以需要将 ControlNet 模型置於 “extensions/deforum-for-automatic1111-webui/models”目录内。在更优雅的解决方法出现之前，请複製，软网址 symlink 或者移动模型。 \n同时目前为止，该延伸模组需要在第一次执行时检查 use_init。\n用於开發程序的 ControlNet 延伸模组版本为 a24089a62e70a7fae44b7bf35b51fd584dd55e25。如果全部按照上文使用还是损坏，请将 ControlNet 版本升级/降级到上述版本。",
|
||
"Due to the limitation of Segment Anything, when there are point prompts, at most 1 box prompt will be allowed; when there are multiple box prompts, no point prompts are allowed.": "由於Segment Anything的限制，当有标记点时，最多允许1个箱体标记；当有多个箱体提示时，不允许使用标记点。",
|
||
"duplicate": "重複的",
|
||
"Duplicate File Behavior": "重複档案行为",
|
||
"Duplicate Skeleton (X-axis)": "複製骨架(X 轴)",
|
||
"Duplicate Skeleton (Z-axis)": "複製骨架(Z 轴)",
|
||
"Duration": "持续时间",
|
||
"during the run sequence, only frames specified by this value will be extracted, saved, and diffused upon. A value of 1 indicates that every frame is to be accounted for. Values of 2 will use every other frame for the sequence. Higher values will skip that number of frames respectively.": "在执行序列期间，只有由该值指定的帧才会被提取、储存和生成。1表示要考虑全部帧。2表示每隔一帧用於序列。设定更较高的 N 值，每次提取将分别跳过 N 帧。",
|
||
"dw_openpose_full": "dw_openpose_full (二阶蒸馏 - 全身姿态估计)",
|
||
"Dyn Cfg Augmentation": "动态 CFG 增强",
|
||
"Dynamic engines support a range of resolutions and batch sizes, at a small cost in performance. Wider ranges will use more VRAM.": "动态 (Dynamic) 引擎支援一个範围的解析度和单批数量，以小量性能消耗为代价。更广的範围需要使用更多的显存。",
|
||
"Dynamic Image Normalization": "图像动态归一化",
|
||
"Dynamic Prompts": "动态提示词",
|
||
"Dynamic Prompts enabled": "启用动态提示词",
|
||
"Dynamic Thresholding": "动态阈值",
|
||
"dynamicprompts library is version 0.29.0": "dynamic prompts 库的版本为: 0.29.0",
|
||
"DynamicThresholding (CFG-Fix) Integrated": "DynamicThresholding (CFG-Fix) Integrated 动态阈值调整（CFG-锁定）",
|
||
"Dystopian": "Dystopian (反乌托邦)",
|
||
"e.g. A portrait photo of embedding_name": "範例： A portrait photo of embedding_name",
|
||
"Each ControlNet unit for each image in a batch": "每张图像的每个 ControlNet 单元各處於一个批次",
|
||
"Each image is center-cropped with an automatically chosen width and height.": "每个图像以自动选择的宽度和高度为中心进行裁剪。",
|
||
"Each key": "显示所有键值",
|
||
"Each preset can be adjusted with the \"Advanced Settings\" option.": "所有预设均可在 \"进阶设定\" 选项中调整。",
|
||
"Each Tags": "每个标籤",
|
||
"Early stopping parameter for CLIP model; 1 is stop at last layer as usual, 2 is stop at penultimate layer, etc.": "CLIP 模型的早期停止参数；1 是按照惯例在最後一层停止，2 是在倒数第二层停止，以此类推。",
|
||
"Easy editing": "简易编辑",
|
||
"EBSynth Mode": "EBSynth 模式",
|
||
"EBSynth Settings": "Ebsynth 设定",
|
||
"Ebsynth-Process": "Ebsynth-流程",
|
||
"edit": "编辑",
|
||
"Edit": "编辑",
|
||
"Edit Caption": "编辑描述",
|
||
"Edit Caption of Selected Image": "编辑被选图像的描述",
|
||
"Edit common tags.": "编辑常见标籤",
|
||
"Edit Exif": "编辑 EXIF 资讯",
|
||
"Edit metadata": "编辑元数据",
|
||
"Edit Model Basic Data": "编辑模型基本数据",
|
||
"Edit Model Trigger Words": "编辑模型触發词",
|
||
"Edit Openpose": "编辑 Openpose",
|
||
"edit prompt words...": "编辑提示词...",
|
||
"edit prompt words... ": "编辑提示词...",
|
||
"Edit styles": "编辑预设样式",
|
||
"Edit SVG": "编辑 SVG",
|
||
"Edit Tags": "编辑标籤 （Edit Tags）",
|
||
"Edit the pose of 3D models in the WebUI, and generate Openpose/Depth/Normal/Canny maps for ControlNet.": "在网页使用者介面上编辑 3D 模型的姿势，并为 ControlNet 产生 Openpose/Depth/Normal/Canny 图。",
|
||
"Edit user metadata": "编辑使用者中继资料",
|
||
"Edit workflow type": "编辑工作流类型",
|
||
"editing": "编辑",
|
||
"Editing Enabled": "启用中继资料编辑",
|
||
"Effect": "效果器",
|
||
"Effective Block Analyzer": "高效区块分析器",
|
||
"Elemental": "组件",
|
||
"Elemental Merge": "组件合併",
|
||
"Elemental Merge, Adjust": "按模型组件合併, 调整",
|
||
"elements": "组件",
|
||
"Elliptic Limbs": "椭圆四肢",
|
||
"EMA (nagetive)": "EMA (负)",
|
||
"EMA (positive)": "EMA (正)",
|
||
"EMA replace steps (nagative)": "EMA 替换步数 (负)",
|
||
"EMA replace steps (positive)": "EMA 替换步数 (正)",
|
||
"ema-only": "仅保留 EMA 权重",
|
||
"Embed photo": "嵌入照片",
|
||
"Embedding": "嵌入",
|
||
"Embedding Editor": "嵌入编辑器",
|
||
"Embedding Learning rate": "嵌入学习率",
|
||
"Embedding Merge": "嵌入合併",
|
||
"Embedding to Shareable PNG": "将 Embedding 转换为可分享的 PNG 图像档案",
|
||
"Embedding token": "Embedding 的词元(Token) / 关键词",
|
||
"embedding-inspector": "嵌入检查器",
|
||
"Embedding: refresh": "嵌入式模型 (Embedding): 刷新",
|
||
"Embeddings": "嵌入",
|
||
"Embeddings editor": "多个嵌入编辑器",
|
||
"Embeddings: loaded": "嵌入式(Embeddings):已载入",
|
||
"Embeddings: skipped": "嵌入式(Embeddings):已跳过",
|
||
"Emphasis mode": "强调模式",
|
||
"Emphasis: use (text) to make model pay more attention to text and [text] to make it pay less attention": "强调符：使用 (文字) 使模型更关注该文本，使用 [文字] 减少其关注度",
|
||
"empty cannot be saved": "留空时无法储存",
|
||
"empty strings cannot be translated": "无法翻译空的文本",
|
||
"Enable": "启用",
|
||
"Enable AA for Downscaling.": "缩小时使用抗锯齿",
|
||
"Enable AA for Upscaling.": "放大时使用抗锯齿",
|
||
"Enable ADetailer": "启用 After Detailer",
|
||
"Enable Ancestral ETA scheduling": "启用 Ancestral 採样方法 ETA 调度",
|
||
"Enable AnimateDiff": "启用 AnimateDiff",
|
||
"Enable Anti Burn (and everything)": "启用 Anti Burn",
|
||
"Enable Autocomplete": "启用标籤自动补全",
|
||
"Enable Autopruning": "启用自动修剪",
|
||
"Enable batch mode": "启用批處理模式",
|
||
"Enable Bilingual Localization": "启用双语翻译对照",
|
||
"Enable CFG-Based guidance": "启用基於 CFG 的引导 (CFG-Based guidance)",
|
||
"Enable Checker": "启用项检测",
|
||
"Enable checkpoint scheduling": "启用模型调度计劃",
|
||
"Enable clear gallery button in txt2img and img2img tabs": "在文生图和图生图页籤中启用清除图像输出列按钮",
|
||
"Enable CLIP skip scheduling": "启用 CLIP 终止层数调度",
|
||
"Enable color correction": "启用颜色校正",
|
||
"Enable comments": "启用註释",
|
||
"Enable Control": "启用控制",
|
||
"Enable controlnet tile resample": "启用 ControlNet 的 tile resample (分块 - 重採样)",
|
||
"Enable Dev mode - adds extra reporting in console": "启用开發者模式 - 在控制台中列印额外回报资讯",
|
||
"Enable Devtools Log": "启用开發工具日誌",
|
||
"Enable dropdown check": "启用下拉框检测",
|
||
"Enable during hires. fix": "在高解析度修复过程中启用",
|
||
"Enable Dynamic Lora Weights": "启用 Dynamic Lora Weights",
|
||
"Enable Dynamic Thresholding (CFG Scale Fix)": "启用动态阈值 (CFG Scale 修复)",
|
||
"Enable emphasis": "启用强调符",
|
||
"Enable extension": "启用延伸模组",
|
||
"Enable extra network check": "启用扩展模型检查",
|
||
"Enable extra network tweaks": "启用扩展网络修改",
|
||
"Enable extras": "开启 ▼",
|
||
"Enable Face Prompt": "启用脸部提示词",
|
||
"Enable feedback during hires. fix": "在高清修复过程中套用反馈",
|
||
"Enable for SDXL": "对 SDXL 模型启用",
|
||
"enable for seamless-tiling of each generated image. Experimental": "启用以使得每个生成的图像都能实作无缝拼接 (实验性)",
|
||
"Enable full page image viewer": "启用整页图像检视器",
|
||
"Enable gif/video playback in the browser": "启用在浏览器内的 GIF 和影片的播放",
|
||
"Enable GroundingDINO": "启用 GroundingDINO",
|
||
"Enable guided images mode": "启用图像引导模式",
|
||
"Enable Hires. fix+": "启用高分修复PLUS",
|
||
"Enable Hypertile U-Net": "启用 Hypertile U-Net",
|
||
"Enable Hypertile U-Net for hires fix second pass": "对高解析度修复层启用 Hypertile U-Net",
|
||
"Enable Hypertile VAE": "启用 Hypertile VAE",
|
||
"Enable IPEX Optimize for Intel GPUs": "为 Intel GPU 启用 IPEX 最佳化",
|
||
"Enable JavaScript aspect ratio controls": "启用前端纵横比控制",
|
||
"Enable Jinja2 templates": "启用 Jinja2 模板",
|
||
"Enable Maintenance tab": "启用 \"维护\" 页籤",
|
||
"Enable model compile (experimental)": "启用模型编译最佳化（实验性）",
|
||
"Enable Model Mixer": "启用模型混合",
|
||
"Enable MultiDiffusion": "启用 MultiDiffusion",
|
||
"Enable neutral-prompt extension": "启用 Neutral Prompt 扩展",
|
||
"Enable Noise Inversion": "启用噪点反转",
|
||
"Enable noise multiplier scheduling": "启用噪点倍率调度",
|
||
"Enable optimized monocular depth estimation": "启用单色深度估算最佳化 (optimized monocular depth estimation)",
|
||
"Enable Or Disable Style Selector": "启用或停用样式选择器",
|
||
"Enable overwrite": "允许覆盖",
|
||
"Enable perspective flip": "启用透视翻转",
|
||
"Enable Pixel Perfect from lllyasviel. Configure your target width and height on txt2img/img2img default panel before preview if you wish to enable pixel perfect.": "启用 lllyasviel 的完美像素模式。在预览前，请在文生图/图生图介面组态好图像的目标宽度和高度。",
|
||
"Enable pixelization": "启用像素化",
|
||
"Enable postprocessing operations in txt2img and img2img tabs": "启用文生图和图生图页籤中的後處理操作",
|
||
"Enable quantization in K samplers for sharper and cleaner results": "对 K 採样方法启用量化以获得更清晰、乾净的结果",
|
||
"Enable quantization in K samplers for sharper and cleaner results. This may change existing seeds": "对 K-diffusion 採样方法启用量化以获得更清晰、乾净的结果。这可能会改变现有的随机种子",
|
||
"Enable quantization in K samplers for sharper and cleaner results. This may change existing seeds. Requires restart to apply.": "在 K 取样器中启用量化以获得更清晰，乾净的结果。这可能会改变现有的随机种子。需要储存设定并重新启动才能套用",
|
||
"Enable Randomize extension": "启用随机化扩展",
|
||
"Enable Refiner": "启用 Refiner",
|
||
"Enable Region 1": "启用区域 1",
|
||
"Enable Region 2": "启用区域 2",
|
||
"Enable Region 3": "启用区域 3",
|
||
"Enable Region 4": "启用区域 4",
|
||
"Enable Region 5": "启用区域 5",
|
||
"Enable Region 6": "启用区域 6",
|
||
"Enable Region 7": "启用区域 7",
|
||
"Enable Region 8": "启用区域 8",
|
||
"Enable sampler scheduling": "启用取样器排程",
|
||
"Enable scribble mode if your image has white background.": "使用白色背景图片时请启用塗鸦模式",
|
||
"Enable sd-webui-comfyui extension": "启用 sd-webui-comfyui 扩展",
|
||
"Enable steps scheduling": "启用迭代步数调度计劃",
|
||
"Enable Style Selector": "启用样式选择器",
|
||
"enable Style Selector by default": "预设启用样式选择器",
|
||
"Enable Subseed scheduling": "启用第二种子调度计劃",
|
||
"Enable Tag Autocompletion": "启用标记自动补齐",
|
||
"Enable tensorboard logging": "启用 Tensorboard 日誌记录",
|
||
"Enable tensorboard logging.": "启用 TensorBoard 日誌记录。",
|
||
"Enable this to generate model with fp16 precision. Results in a smaller checkpoint with minimal loss in quality.": "启用本选项可生成 fp16 精度的模型。缩小模型体积的同时尽量把品质损失降到最低。",
|
||
"Enable this to save VRAM.": "启用此项以节省显存 (VRAM)。",
|
||
"Enable thumbnail tooltips": "启用缩略图工具提示",
|
||
"Enable Tiled Diffusion": "启用 Tiled Diffusion",
|
||
"Enable Tiled VAE": "启用 Tiled VAE",
|
||
"Enable to Store file in object storage that supports the s3 protocol": "将档案储存到支援 S3 协议的物件存储",
|
||
"enable to trigger webui's face restoration on each frame during the generation": "启用以在每一帧生成过程中触發 webui 的脸部修复功能",
|
||
"Enable Token Merging (faster, less VRAM, less accurate)": "启用 Token 合併 (更快，使用更少显存，精确度降低)",
|
||
"Enable tooltip on the canvas": "启用画布上的工具列提示框",
|
||
"Enable Tree View": "启用树状检视",
|
||
"Enable uploading manually created mask to SAM.": "启用手动上传遮罩到 SAM。",
|
||
"Enable upscale with extras": "启用後期處理放大",
|
||
"Enable Vectorizing": "启用矢量化",
|
||
"Enable webcam": "开启网络摄像头",
|
||
"Enable weight check": "启用权重检查",
|
||
"Enable/When": "启用/时机",
|
||
"enabled": "启用",
|
||
"Enabled": "启用",
|
||
"enables 2D mode functions to simulate faux 3D movement": "启用 2D 模式的功能来仿照模拟 3D 运动",
|
||
"enables all 3D motion parameters.": "启用所有 3D 运动参数",
|
||
"Enables the Extra Networks directory tree view by default": "预设启用扩展模型树状目录检视",
|
||
"Enables using AND keyword(composable diffusion) to limit LoRAs to subprompts. Useful when paired with Latent Couple extension.": "允许使用 AND 关键字（composable diffusion）来限制 LoRA 到子提示词。当与潜在变数伴侣扩充功能搭配使用时非常有用。",
|
||
"Enabling this will provide better results and editability, but cost more VRAM.": "启用此功能将提供更好的结果和可编辑性，但会消耗更多显存。",
|
||
"Enabling this will save the EMA unet weights as the 'normal' model weights and ignore the regular unet weights.": "启用本选项会把 EMA U-Net 权重作为 “正常” 模型的权重储存，并且会无视一般 U-Net 权重。",
|
||
"Encoder Color Fix": "编码器颜色修复",
|
||
"Encoder Tile Size": "编码器分块尺寸",
|
||
"end at this step": "在此叠代步数停止",
|
||
"End blur width": "结束模糊宽度",
|
||
"End generation immediately or after completing current batch": "立即或在完成当前批次後结束生成",
|
||
"End of prompt": "提示词後",
|
||
"End Page": "尾页",
|
||
"End Percent": "结束百分比",
|
||
"end the animation at this frame number": "达成此帧数後停止生成",
|
||
"Ending Control Step": "停止控制步数(%)",
|
||
"Ending Control Step schedule": "结束引导时机调度计劃",
|
||
"Engages hybrid compositing of video into animation in various ways with comp alpha as a master mix control.": "使用多种方式参与影片转动画的合成过程, 以合成透明度作为主要方式控制混合",
|
||
"Engine": "引擎",
|
||
"english": "英语",
|
||
"Enhance": "Enhance (增强)",
|
||
"Enhanced img2img": "Enhanced img2img (图生图增强)",
|
||
"Enlarge the brush size": "放大画笔",
|
||
"Enqueue": "排队",
|
||
"Enter a model name for saving checkpoints and lora models.": "输入模型名称以储存检查点和 lora 模型。",
|
||
"enter any additional notes": "输入任何附加注意事项",
|
||
"Enter categody ids, separated by +. For example, if you want bed+person, your input should be 7+12 for ade20k and 59+0 for coco.": "在此输入类别 ID，用 + 分隔。例如，如果你想分割出 床 + 人，使用ade20k协议应该输入 7 + 12，使用coco协议应该输入 59 + 0。",
|
||
"Enter category IDs": "输入类别ID",
|
||
"Enter file name to save": "输入要储存的档名",
|
||
"Enter hypernetwork Dropout structure (or empty). Recommended : 0~0.35 incrementing sequence: 0, 0.05, 0.15": "输入 Hypernetwork Dropout 结构（或空）。推荐：0~0.35 的递增序列：0、0.05、0.15",
|
||
"Enter hypernetwork layer structure": "输入超网路（Hypernetwork）层结构",
|
||
"Enter input path": "填写输入目录",
|
||
"Enter name of token/embedding or token ID as #nnnnn": "输入词元 (token) / 嵌入式模型 (embedding) 的名称或词元 ID 为 #nnnnn",
|
||
"Enter output path": "填写输出目录",
|
||
"Enter prompt here": "在此處输入提示词",
|
||
"Enter prompts (one line for one trigger words)": "输入提示词（一行一个触發词）",
|
||
"Enter relative to webui folder or Full-Absolute path, and make sure it ends with something like this: '20230124234916_%09d.png', just replace 20230124234916 with your batch ID. The %05d is important, don't forget it!": "输入绝对路径或者以 webui 为根目录的相对路径，同时确认路径结尾类似“20230124234916_%09d.png”。只需要将 20230124234916 取代为你的 batch ID。“%05d”很重要，别忘了！",
|
||
"Enter relative to webui folder or Full-Absolute path, and make sure it ends with something like this: '20230124234916_%09d.png', just replace 20230124234916 with your batch ID. The %09d is important, don't forget it!": "输入相对於 webui 目录的路径或者绝对路径，并确保图像以这样的名称为後缀: '20230124234916_%09d.png'，用批次名称取代 20230124234916 即可。别忘了 ％09d ，它很重要!",
|
||
"Enter the path to a txt file containing sample prompts.": "输入包含样本提示的 txt 档案的路径。",
|
||
"enter username for submission": "输入用户名以提交",
|
||
"Enter words and color hexes to mark weights on the sliders for guidance. Hint: Use the txt2img prompt token counter or": "输入文字和颜色十六进制程式码以在滑桿上标记权重作为引导。 提示：使用文生图提示词标记计数器或使用",
|
||
"Enter your custom name.": "输入自订名称",
|
||
"Enter your prompt word (trigger word/prompt/negative prompt)": "输入你的提示词（触發词/提示词/反向提示词）",
|
||
"Enter your trigger word. EX: character_name_(title of novel)": "输入触發词。例如：character_name_\\(title of novel\\)",
|
||
"Enter your trigger word. EX: character_name_\\(title of novel\\)": "输入触發词。例如：character_name_\\(title of novel\\)",
|
||
"Entire Caption": "整个描述",
|
||
"Envelope (Outer Fit)": "信封模式 (贴合外边)",
|
||
"Epochs to Simulate": "要模拟的训练週期",
|
||
"Equirectangular projection": "等距柱状投影图",
|
||
"Erase BG": "移除背景图",
|
||
"error": "错误",
|
||
"Error": "错误",
|
||
"Error Correction Level": "纠错等级",
|
||
"Error threshold": "误差阈值",
|
||
"Error! Composable Lora install failed! Please reinstall composable_lora and restart the WebUI.": "错误! Composable Lora安装發生问题。请尝试重新安装Composable Lora并重新启动WebUI和终端机。",
|
||
"es_ES Localization": "西班牙语本地化语言包",
|
||
"escape (\\) brackets in deepbooru (so they are used as literal brackets and not for emphasis)": "在 deepbooru 中使用转义 (\\) 括号（使其用作括号字元而不是强调符）",
|
||
"Escape brackets": "将结果中的括号进行转义處理",
|
||
"Escape brackets in tag": "转义标记内括号",
|
||
"Escape parentheses on insertion": "插入时转义括号",
|
||
"ESRGAN_4x": "ESRGAN_4x (写实 锐化)",
|
||
"eta (noise multiplier) for ancestral samplers": "Ancestral 採样方法的 Eta (噪点倍率)",
|
||
"eta (noise multiplier) for DDIM": "DDIM 的 Eta (噪点倍率) ",
|
||
"Eta for ancestral samplers": "Ancestral 採样方法的 η 系数",
|
||
"Eta for DDIM": "DDIM 採样方法的 Eta 系数",
|
||
"Eta for k-diffusion samplers": "k-diffusion 採样方法的 Eta 系数",
|
||
"Eta noise seed delta": "Eta 噪点种子偏移（ENSD）",
|
||
"ETA Noise Seed Delta": "Eta 噪点种子偏移量 (ENSD)",
|
||
"etc": "其他",
|
||
"Euler Ancestral - very creative, each can get a completely different picture depending on step count, setting steps higher than 30-40 does not help": "Euler Ancestral - 非常具创意，每个人都可以根据步数获得完全不同的图像，将步数设定高於 30-40 并没有太大帮助",
|
||
"Euler Ancestral - very creative, each can get a completely different picture depending on step count, setting steps to higher than 30-40 does not help": "Euler Ancestral - 非常有创意，可以根据迭代步数获得完全不同的图像，将迭代步数设定为高於 30-40 不会有正面作用",
|
||
"Eval Preset": "Eval 预设",
|
||
"Every prompt in Batch Will Have Random Style": "每个生成批次都会随机套用提示词",
|
||
"ex A.": "例 A：",
|
||
"ex B.": "例 B：",
|
||
"ex C.": "例 C：",
|
||
"EX: ": "例如：",
|
||
"Examine the instance and class images and report any instance images without corresponding class images.": "检查实例和类别图像，并回报任何没有相应类别图像的实例图像。",
|
||
"Example flow:": "工作流範例: ",
|
||
"Example: Default args should use 221 as the total keyframes.": "範例：预设参数下应设定 221 作为关键帧总数",
|
||
"Example: Default args should use 221 as total keyframes.": "範例：预设参数应使用 221 作为总关键帧数。",
|
||
"Example: seed_schedule could use 0:(5), 1:(-1), 219:(-1), 220:(5)": "範例：种子调度计劃可以这麼填写 0:(5), 1:(-1), 219:(-1), 220:(5)",
|
||
"Example: seed_schedule could use 0:(s), 1:(-1), \"max_f-2\":(-1), \"max_f-1\":(s)": "範例：种子调度计劃可以设定为 0:(s), 1:(-1), \"max_f-2\":(-1), \"max_f-1\":(s)",
|
||
"Example: strength_schedule could use 0:(0.25 * cos((72 / 60 * 3.141 * (t + 0) / 30))**13 + 0.7) to make alternating changes each 30 frames": "範例：强度调度计劃可以设定为 0:(0.25 * cos((72 / 60 * 3.141 * (t + 0) / 30))**13 + 0.7) 来使强度在每过 30 帧交替一次变化",
|
||
"Examples": "例子",
|
||
"exampls: Change base alpha from 0.1 to 0.9": "例：从 0.1 至 0.9 改变基层 α",
|
||
"Exclude tag, ..": "排除标籤, ..",
|
||
"Exclude tags (split by comma)": "排除标籤 (逗号分隔)",
|
||
"Exclude Target (e.g., finger, book)": "排除目标（如 finger, book）",
|
||
"Excluded Tag confidences": "排除标籤置信度",
|
||
"Excluded tags": "排除标籤",
|
||
"exclusion": "排除",
|
||
"Excudes (split by comma)": "排除 (逗号分隔)",
|
||
"exif keyword": "exif 关键字",
|
||
"EXIF keyword search": "EXIF 关键词搜寻",
|
||
"exif_data": "EXIF 数据",
|
||
"Existing Caption Action": "既有描述處理",
|
||
"Existing Caption txt Action": "对现有的文字档案进行描述文字的动作",
|
||
"Existing Prompt Contents": "现存的提示词内容",
|
||
"Exit ⭕": "退出",
|
||
"Expand accordion by default": "预设展开手风琴 UI",
|
||
"Expand by default": "预设展开扩充功能",
|
||
"Expand Mask": "展开遮罩设定",
|
||
"Expand Mask Iterations": "拓展遮罩迭代数",
|
||
"Expand mask region": "展开遮罩区域",
|
||
"Expanded Mask": "扩展後遮罩",
|
||
"Experimental features (May be solve the problem of erratic training and difficult to reproduce [set EMA to 0.97])": "实验性功能（可能解决训练不稳定和难以重现的问题 [将 EMA 设定为 0.97]）",
|
||
"Experimental Settings": "实验性设定",
|
||
"Experimental Shared Source:": "实验性共享来源:",
|
||
"Experimental Shared Src": "实验性共享来源",
|
||
"EXPERIMENTAL: LoRA Shared Diffusers Source": "实验性: 共享 LoRA Diffusers 来源",
|
||
"Explanation of Each Parameter": "参数解释",
|
||
"explicit": "色情/露骨内容（Explicit）",
|
||
"Explore Model": "试用模型",
|
||
"Export": "汇出",
|
||
"Export Default Engine": "汇出预设引擎",
|
||
"Export Engine": "汇出引擎",
|
||
"Export type": "输出类型",
|
||
"Exported Text": "输出文本",
|
||
"ExposureOffset": "曝光偏移",
|
||
"extcrop": "裁剪後扩展",
|
||
"Extended prompt guide (jp)": "扩展提示词指南 (日语)",
|
||
"Extension": "扩充功能",
|
||
"Extension for quickly selecting and applying custom.css files, for customizing look and placement of elements in ui.": "用於快速选择和应用 custom.css 档案的延伸模组，以自定义 ui 中元素的外观和位置。",
|
||
"Extension index URL": "扩充列表网址",
|
||
"Extension script for AUTOMATIC1111/stable-diffusion-webui to travel between prompts in latent space.": "一个在潜在变数中对不同提示词之间进行插值渐变，并生成其渐变过程的扩充功能指令码",
|
||
"Extension State": "扩展状态",
|
||
"Extension that gets tags for saved gelbooru images in AUTOMATIC1111's Stable Diffusion webui": "扩充功能，可获取在 AUTOMATIC1111 的 Stable Diffusion webui 中储存的 Gelbooru 图像的标籤",
|
||
"Extension that provides additional training features for hypernetwork training. Also supports using multiple hypernetworks for inference.": "提供超网络训练的额外训练功能的扩充套件。也支援同时使用多个超网络进行推论。",
|
||
"extension to be installed, but will work with it disabled.)": " 扩展, 但本选项功能可以在其禁用时生效)",
|
||
"extension to be installed.": " 延伸模组",
|
||
"Extension version": "扩充功能版本",
|
||
"extensions": "扩展",
|
||
"Extensions": "扩充功能",
|
||
"extensive": "大量",
|
||
"extfull": "填充至完整",
|
||
"extra": "额外的",
|
||
"Extra": "▼",
|
||
"Extra .cni file": "单独的 .cni 档案",
|
||
"Extra args": "额外参数",
|
||
"Extra arguments": "额外参数",
|
||
"Extra arguments for trtexec command in plain text form": "以纯文本形式填写用於 trtexec 指令的额外参数",
|
||
"Extra file in alias only format": "附加词库档案使用仅别称格式",
|
||
"Extra filename": "额外档名",
|
||
"Extra filename (do not use e621.csv here!)": "附加词库档案（不要使用e621.csv）",
|
||
"Extra filename (for small sets of custom tags)": "追加标记档档名（用於小型的自定义标记集）",
|
||
"Extra generation params": "附加生成参数",
|
||
"Extra Network": "扩展模型",
|
||
"Extra network card height": "扩展模型卡片高度",
|
||
"Extra network card width": "扩展模型卡片宽度",
|
||
"Extra Networks": "额外网路",
|
||
"Extra Networks directory view style": "扩展模型目录检视样式",
|
||
"Extra networks separator": "扩展模型分隔文本",
|
||
"Extra networks tab order": "额外网络标籤顺序",
|
||
"Extra Noise Lowpass": "额外噪点低通滤波",
|
||
"Extra Noise Method": "额外噪点演算法",
|
||
"Extra Noise Multiplier": "额外噪点倍数",
|
||
"Extra noise multiplier for img2img and hires fix": "图生图和高解析度修复的额外噪点倍率",
|
||
"Extra Noise Type": "额外噪点类型",
|
||
"Extra path to scan for ControlNet models (e.g. training output directory)": "扫描 ControlNet 模型的额外路径（例如训练输出目录）",
|
||
"Extra path to scan for LoRA models (e.g. training output directory)": "检索低秩微调模型 (LoRA) 的附加目录",
|
||
"Extra paths to scan for LoRA models, comma-separated. Paths containing commas must be enclosed in double quotes. In the path, \" (one quote) must be replaced by \"\" (two quotes).": "扫描 LoRA模型的额外目录，以逗号分隔。包含逗号的路径必须用双引号括起来。在路径中，一个引号「\"」必须替换为「\"\"」两个引号。",
|
||
"Extra steps": "额外迭代步数",
|
||
"Extra text to add before <...> when adding extra network to prompt": "在向提示词中新增扩展模型标籤时在 <…> 之前新增额外文本",
|
||
"Extract": "提取",
|
||
"Extract all faces from a batch of images. Will apply enhancement in the tools enhancement tab.": "从批量图像中提取所有脸部。会套用在 ”工具 --> 增强“ 页籤中设定的增强功能",
|
||
"Extract EMA Weights": "提取 EMA 权重",
|
||
"Extract every nth frame": "每第 n 帧提取一次",
|
||
"Extract Frames": "提取帧",
|
||
"Extract frames from the original video.": "将原始影片转换为帧序列。",
|
||
"Extract from frame": "提取开始帧",
|
||
"Extract nth frame": "每 N 帧提取一次",
|
||
"Extract to frame": "提取结束帧",
|
||
"Extract U-Net features": "提取 U-Net 特征值",
|
||
"Extracted Frame Set": "提取好的帧",
|
||
"extras": "附加功能",
|
||
"Extras": "附加功能",
|
||
"extras history": "更多页籤的历史记录",
|
||
"Extremely slow (OpenCV + FaceMesh)": "极慢 (OpenCV + FaceMesh)",
|
||
"Eyeful_v1.pt": "Eyeful_v1.pt (2D / 写实 / 单眼)",
|
||
"Eyes.pt": "Eyes.pt (2D / 写实 眼)",
|
||
"Face": "脸部",
|
||
"Face Area Magnification": "脸部区域扩展",
|
||
"Face Checkpoint (precedence over reference face)": "脸部模型 (优先於参考图像脸部)",
|
||
"Face checkpoint built with the checkpoint builder in tools. Will overwrite reference image.": "使用模型建置工具建立的脸部模型。会覆盖参考图像",
|
||
"Face Crop option": "脸部修复选项",
|
||
"Face Crop Resolution": "脸部修复解析度",
|
||
"Face Denoising Strength": "脸部降噪强度",
|
||
"Face detection confidence": "脸部辨识强度",
|
||
"Face Detection Method": "人脸辨识演算法",
|
||
"Face margin": "脸部区域大小",
|
||
"face model resolution": "脸部模型解析度",
|
||
"Face restoration": "脸部修复",
|
||
"Face restoration model": "脸部修复模型",
|
||
"Face restore": "脸部修复",
|
||
"Face Restore Model": "脸部修复模型",
|
||
"face_yolov8m.pt": "face_yolov8m.pt (2D / 写实 脸)",
|
||
"face_yolov8n.pt": "face_yolov8n.pt (2D / 写实 脸)",
|
||
"face_yolov8n_v2.pt": "face_yolov8n_v2.pt (2D / 写实 脸)",
|
||
"face_yolov8s.pt": "face_yolov8s.pt (2D / 写实 脸)",
|
||
"FacesV1.pt": "FacesV1.pt (2D / 写实 / 兽迷 脸)",
|
||
"FaceSwapLab FaceSwap Model": "FaceSwapLab FaceSwap 模型",
|
||
"Fairy Tale": "Fairy Tale ( 童话)",
|
||
"Fall-off exponent (lower=higher detail)": "衰减指数（越小细节越好）",
|
||
"False": "否",
|
||
"Fantasy Art": "Fantasy Art (奇幻艺术)",
|
||
"Far clip": "远處裁面",
|
||
"Far schedule": "远處裁面距离调度计劃",
|
||
"fast": "快速",
|
||
"Fast Decoder": "快速解码器",
|
||
"Fast Encoder": "快速编码器",
|
||
"Fast Encoder Color Fix": "快速编码器颜色修复",
|
||
"Fast Encoder may change colors; Can fix it with more RAM and lower speed.": "快速编码器会导致颜色变更；可以使用更多记忆体与时间来修复。",
|
||
"Fast PNG Info": "快速 PNG 资讯",
|
||
"Fast PNG Info ⚡": "⚡ 快速提取 PNG 图像资讯 ⚡",
|
||
"faster": "稍快",
|
||
"favorites": "收藏夹",
|
||
"Favorites": "收藏夹",
|
||
"Favorites path from settings: log/images": "从设定中获取收藏夹路径: log/images",
|
||
"Fax": "传真",
|
||
"Feature-rich UI tab that allows image viewing, search-filtering and editing.": "功能丰富的使用者介面标籤，允许检视图像、搜寻过滤和编辑。",
|
||
"Feedback end": "反馈终止时机",
|
||
"Feedback start": "反馈介入时机",
|
||
"Feedback Strength": "反馈强度",
|
||
"FEMALE": "女性",
|
||
"female-breast.pt": "female-breast.pt (写实 胸部)",
|
||
"female_breast_v1.1-sensitive.pt": "female_breast_v1.1-sensitive.pt (写实 胸部)",
|
||
"female_breast_v2.pt": "female_breast_v2.pt (写实 胸部 不含衣服)",
|
||
"female_breast_v3.2.pt": "female_breast_v3.2.pt stable (写实 胸部 不含衣服)",
|
||
"female_breast_v3.pt": "female_breast_v3.pt (写实 胸部 不含衣服)",
|
||
"female_breast_v4.2.pt": "female_breast_v4.2.pt (写实 胸部 奇幻 不含衣服)",
|
||
"Fetch output folder from a1111 settings (Reload needed to enable)": "从 webui 设定中获取输出目录 (需重载以启用)",
|
||
"Fetch previews for existing models": "获取本地模型预览图",
|
||
"ffmpeg binary. Only set this if it fails otherwise.": "FFMPEG二进制。 只有在其他情况下失败时才设定这个。",
|
||
"FFmpeg CRF value": "FFmpeg CRF 值",
|
||
"FFmpeg path/ location": "FFmpeg 路径",
|
||
"FFmpeg Preset": "FFmpeg 预设",
|
||
"FFmpeg settings": "FFmpeg 设定",
|
||
"fi_FI Localization": "芬兰语本地化语言包",
|
||
"Fields managed in your Parseq manifest override the values and schedules set in other parts of this UI. You can select which values to override by using the \"Managed Fields\" section in Parseq.": "参数定序器清单中管理的字段会覆盖本使用者介面其他部分设定的值和调度计劃。可以通过参数定序器中的 \" 管理字段 (Managed Fields)\"选择要覆盖的值",
|
||
"Fighting Game": "Fighting Game (格闘遊戏)",
|
||
"File": "档案",
|
||
"File editor": "档案编辑器",
|
||
"File extensions": "档案副档名",
|
||
"File format for grids": "宫格图的档案格式",
|
||
"File format for images": "图像的档案格式",
|
||
"File Name": "档案名",
|
||
"File name or path": "档名或路径",
|
||
"file not found: None": "未检索到模型",
|
||
"File size limit for the above option, MB": "档案容量上限（MB）",
|
||
"File size:": "档案大小:",
|
||
"File system": "档案系统",
|
||
"File type": "档案类型",
|
||
"File with inputs": "含输入内容的档案",
|
||
"File:": "档案: ",
|
||
"file_from": "原始档名",
|
||
"file_name": "档名",
|
||
"file_to": "目标储存库",
|
||
"filename": "档名",
|
||
"Filename": "档名",
|
||
"Filename join string": "档案名连接用字串",
|
||
"filename keyword": "档名关键字",
|
||
"Filename keyword search": "档名关键词搜寻",
|
||
"Filename of auto save model": "自动储存模型档名",
|
||
"Filename word regex": "档案名用词的正则表达式",
|
||
"filename(option)": "档名 (可选)",
|
||
"Filename:": "档名: ",
|
||
"Filepath:": "档案路径：",
|
||
"Files in the output directory may be overwritten.": "输出目录中的档案可能会被覆盖。",
|
||
"Files to process": "要處理的档案",
|
||
"Filewords": "风格 / 物品名称",
|
||
"fill": "填充",
|
||
"fill down": "向下扩展",
|
||
"fill it with colors of the image": "用图像的颜色（高强度模糊）填充它",
|
||
"fill it with latent space noise": "以潜在变数空间噪点填充",
|
||
"fill it with latent space zeroes": "以潜在变数填零填充",
|
||
"fill left": "向左扩展",
|
||
"fill right": "向右扩展",
|
||
"fill up": "向上扩展",
|
||
"Fill value used when Padding is set to constant": "填充模式设定为常数时的填充数值",
|
||
"Film Noir": "Film Noir (黑色电影)",
|
||
"Filter": "过滤器",
|
||
"Filter Apply": "套用过滤器",
|
||
"Filter base model:": "底模筛选: ",
|
||
"Filter Base Model:": "底模筛选: ",
|
||
"Filter by Selection": "通过选择过滤",
|
||
"Filter by Tags": "通过标籤过滤",
|
||
"Filter files": "过滤档案",
|
||
"Filter Images": "过滤图像",
|
||
"Filter Images by Tags": "通过标籤过滤图像",
|
||
"filter item": "筛选项",
|
||
"Filter Logic": "过滤逻辑",
|
||
"Filter models by path name": "模型列表将仅显示此路径下的模型",
|
||
"Filter NSFW content": "过滤成人内容 (NSFW)",
|
||
"Filter out following properties (comma seperated). Example film grain, purple, cat": "过滤以下提示词包含的属性 (逗号分隔). 例如: film grain, purple, cat",
|
||
"filter out those tags from deepbooru output (separated by comma)": "从 Deepbooru 输出中过滤掉这些标籤(用逗号分隔)",
|
||
"filter value": "筛选值",
|
||
"Filter values": "筛选值",
|
||
"Final denoising strength": "最终重绘幅度",
|
||
"Find and manage wildcards in the Wildcards Manager tab.": "在万用字元管理器分页中寻找并管理万用字元",
|
||
"find but bo translated:": "已找到但无翻译：",
|
||
"Find more settings on the": "寻找更多设定请前往",
|
||
"Find your cozy spot on Auto1111's webui": "探寻 Auto1111 webui 最舒适的使用方式",
|
||
"Finnish localization": "芬兰语本地化",
|
||
"First": "First (第一生成帧)",
|
||
"First face of batches sources will be extracted and used as input (or blended if blend is activated).": "批量图像源的第一个脸部将作为输入 (或启用混合功能时进行混合)",
|
||
"First frame as init image": "第一帧作为初始化图像",
|
||
"first frame of img2img result": "图生图结果的第一帧",
|
||
"First inference involves compilation of the model for best performance.": "第一次推理会编译模型以获得最佳性能",
|
||
"First Name": "名字",
|
||
"First Page": "首页",
|
||
"first pass": "第一层",
|
||
"First upscaler": "第一放大方法",
|
||
"FirstGen": "FirstGen (處理後生成的第一帧)",
|
||
"Firstpass height": "首次生成高度",
|
||
"Firstpass width": "首次生成宽度",
|
||
"Fit video length": "适配影片长度",
|
||
"Fix broken CLIP position IDs": "修复损坏的 Clip position ID",
|
||
"Fix CFG": "固定引导系数(CFG)",
|
||
"Fix clip": "修复 CLIP",
|
||
"Fix Seed": "固定变异种子(Seed)",
|
||
"fixed": "固定",
|
||
"Fixed Roll": "固定旋转",
|
||
"Fixed seed": "固定随机种子",
|
||
"Fixed size to resize images to": "调整图像大小到固定大小",
|
||
"Flat Papercut": "Flat Papercut (平面剪纸)",
|
||
"Flatfile": "纯文字档案",
|
||
"Flip": "翻转",
|
||
"Float value from 0 to 1": "从 0 到 1 的浮点数数值",
|
||
"Flow consistency mask": "光流一致性遮罩",
|
||
"Flow factor schedule": "光流系数调度计劃",
|
||
"Flow method": "光流演算法",
|
||
"Focal point edges weight": "焦点缐条权重",
|
||
"Focal point entropy weight": "焦点熵权重",
|
||
"Focal point face weight": "焦点脸部权重",
|
||
"Folder": "档案夹",
|
||
"Folder name where output images will be saved": "输出图像的目录储存名称",
|
||
"Folder to Save Generation Images": "用於储存生成图像的目录",
|
||
"folder_from": "源资料夹",
|
||
"folder_to": "目标储存库",
|
||
"Follow installation instructions here": "请跟随此處的安装指引",
|
||
"Font color": "字体颜色",
|
||
"Font for image grids that have text": "有文字的宫格图使用的字体",
|
||
"Font size": "字体大小",
|
||
"Food Photography": "Food Photography (食品摄影)",
|
||
"Foot Size": "脚掌尺寸",
|
||
"For": "用於",
|
||
"For -1 seed, all frames in a GIF have common seed": "GIF 中所有帧共用一个随机种子",
|
||
"For accurate performance measurements, it is recommended to exclude this slower first inference, as it doesn't reflect normal running time.": "若需要准确测量性能, 建议排除较慢的第一次推理, 因为其不能反映正常的执行时间",
|
||
"for ade20k and": "来获得 ade20k 类别, 检视",
|
||
"For advanced keyframing with Math functions, see": "若欲进阶使用数学函数进行关键帧动画，请参考：",
|
||
"For advanced users, you can create a permanent file in \\OneButtonPrompt\\userfiles\\ called antilist.csv": "对於专业使用者，可以在 \\OneButtonPrompt\\userfiles\\ 中建立一个永久档案，命名为 antilist.csv",
|
||
"For advanced users, you can create a permanent file in OneButtonPromptuserfiles called antilist.csv": "对於专业使用者，可以在 \\OneButtonPrompt\\userfiles\\ 中建立一个永久档案，命名为 antilist.csv",
|
||
"for backward compatibility. uses the formula: `width/height`": "为了向後相容性。请使用以下格式: `宽度/高度`",
|
||
"For best prompts with Stable Diffusion 1.* choose the": "要获得 Stable Diffusion 1.x 的最佳提示词，请选择 ",
|
||
"For best prompts with Stable Diffusion 2.* choose the": "要获得 Stable Diffusion 2.x 的最佳提示词，请选择 ",
|
||
"for coco to get category->id map. Note that coco jumps some numbers, so the actual ID is line_number - 21.": "来获得 coco 的类别 -> id 映射。需注意: coco 会跳过部分数字，所以实际 ID 应该是 “劃定数字 - 21 (line_number - 21)”",
|
||
"for depth map.": "获取深度图更多资讯",
|
||
"for detailed explanation.": "以了解详细说明",
|
||
"for explanation of each parameter. If you still cannot understand, use default.": "以了解每个参数的含义。如果仍不理解，请保持预设。",
|
||
"FOR HELP CLICK HERE": "需要帮助请点击这裡",
|
||
"For hires fix, calculate conds of second pass using extra networks of first pass.": "对高清修复使用第一层的扩展网络来为第二层计算条件",
|
||
"For hires fix, use width/height sliders to set final resolution rather than first pass (disables Upscale by, Resize width/height to).": "对於 hires fix，使用宽度/高度滑桿设定最终解析度，而不是第一遍（停用放大比例、调整宽度/高度）",
|
||
"for how many frames the same seed should stick before iterating to the next one": "在迭代到下一个新种子之前该种子应使用多少帧",
|
||
"For image processing do exactly the amount of steps as specified": "在进行图像處理时，准确执行滑块所指定的迭代步数",
|
||
"For inpainting, include masked composite in results for web": "对於区域重绘，将遮罩合成包含在网页结果中。",
|
||
"For inpainting, include the greyscale mask in results for web": "对於区域重绘，将灰度遮罩包含在网页结果中",
|
||
"For inpainting, save a copy of the greyscale mask": "对於区域重绘，储存一份灰度遮罩的副本。",
|
||
"For inpainting, save a masked composite": "对於修补，储存一个遮罩合成图像。",
|
||
"For more details, and functionality, see the documentation (coming soon)": "更多细节和功能，请查阅文档（筹备中）",
|
||
"for more detials": " 来检视更多细节",
|
||
"for more info/ a Guide.": "获取更多资讯 / 指南",
|
||
"For more information, please visit the TensorRT Extension GitHub page": "需要了解更多资讯，可以检视 TensorRT 扩展的 GitHub 页面 → ",
|
||
"For negative prompts, please write your positive prompt, then --neg ugly, text, assymetric, or any other negative tokens of your choice. OR:": "对於反向提示词，请写出你的正向提示词，然後新增 --neg ugly,text,assymetric 等您选择的任何其他反向提示词。或者：",
|
||
"For SD upscale, how much overlap in pixels should there be between tiles. Tiles overlap so that when they are merged back into one picture, there is no clearly visible seam.": "使用 SD 放大时，图块之间应该有多少画素重叠。图块之间需要重叠才可以让它们在合併回一张图像时，没有清晰可见的接缝",
|
||
"for supported extensions)": " 寻找已支援的扩展)",
|
||
"for your animation (leave blank to ignore).": "用於你的动画中（留空表示忽略）",
|
||
"Forbid URLs to local resources": "不允许通过 URL 连缐访问本地资源",
|
||
"force all frames to be in grayscale": "强制所有帧图像为灰度",
|
||
"Force CLIP position_id to int64 before convert": "在转换前强制将 CLIP position_id 转换为 int64",
|
||
"Force convert half to float on interpolation (for some platforms)": "在插值时强制将半精度浮点数转换为全精度 (适用於部分平台)",
|
||
"Force CPU (Requires Custom Script Reload)": "强制使用 CPU（需要重新载入自定义脚本）",
|
||
"Force image gallery to use temporary files": "强制图库使用临时档案",
|
||
"Force Rebuild.": "强制重新建置",
|
||
"Force Reset": "强制重设",
|
||
"Force touch mode": "强制触摸模式",
|
||
"Forearm": "前臂长度",
|
||
"Foreground": "前景",
|
||
"Foreground Transparency": "前景透明度",
|
||
"Format": "格式",
|
||
"format: http://127.0.0.1:port": "格式: http://127.0.0.1:端口号",
|
||
"Found a bug or want to ask for a feature ? Please": "發现了一个错误或想请求新增一个功能？请",
|
||
"Found a bug or want to ask for a feature ? Please use": "發现了一个错误或想请求新增一个功能？请使用",
|
||
"Found a bug or want to ask for a feature ? Please use ": "發现了 Bug 或者有个新的想法？请访问 ",
|
||
"Found tags": "符合的标籤",
|
||
"FOV schedule": "可视範围(FOV)调度计劃",
|
||
"FP8 weight": "FP8 权重",
|
||
"fps": "帧率",
|
||
"FPS": "帧率",
|
||
"fps: ": "帧率：",
|
||
"fraction of sampling steps when the switch to refiner model should happen; 1=never, 0.5=switch in the middle of generation": "在迭代步数完成占比的多少切换 Refiner 模型; 1 = 不切换, 0.5 = 在生成迭代步数完成一半时切换",
|
||
"frame extracted": "帧序列转换完成。",
|
||
"Frame Height": "帧高度",
|
||
"Frame Interpolation": "帧插值",
|
||
"Frame Interpolation to smooth out, slow-mo (or both) any video.": " 进行帧插值来让任何视频获得顺滑的切换效果，慢动作 (或两者皆可)",
|
||
"Frame Interpolation will *not* run if any of the following are enabled: 'Store frames in ram' / 'Skip video for run all'.": "帧差值将不会在以下任一选项启用时启动：“储存帧图像到记忆体” / “跳过影片”",
|
||
"Frame Width": "帧宽度",
|
||
"Framerate": "侦率",
|
||
"Frames": "总帧数",
|
||
"frames per keyframe": "每几帧提取1个关键帧",
|
||
"Frames per second": "每秒多少帧",
|
||
"Frames per second (FPS)": "帧率 (FPS)",
|
||
"Frames Per Wave": "每波帧数",
|
||
"Frames to Video": "帧图像转影片",
|
||
"frappe": "frappe/冰沙（深色-亮）",
|
||
"Free GPU": "释放显存",
|
||
"FreeU Integrated": "FreeU Integrated U-Net 加权最佳化增强",
|
||
"Freeze CLIP Normalization Layers": "冻结 CLIP 正规化层",
|
||
"Frequency": "频率",
|
||
"from": "从",
|
||
"From (full path)": "从 (输入完整路径)",
|
||
"From img2img2 settings": "依照图生图设定",
|
||
"full": "完整",
|
||
"Full": "完整",
|
||
"Full page image viewer: control icon unfocused opacity": "网页全萤幕检视器: 控制图标未悬停时的不透明度",
|
||
"Full page image viewer: enable": "网页全萤幕检视器: 启用",
|
||
"Full page image viewer: gamepad repeat period": "网页全萤幕检视器: 遊戏手柄回报率",
|
||
"Full page image viewer: navigate with gamepad": "网页全萤幕检视器: 启用遊戏手柄导览",
|
||
"Full page image viewer: show images zoomed in by default": "网页全萤幕检视器: 预设情况下显示放大的图像",
|
||
"Full page image viewer: tool bar opacity": "网页全萤幕检视器: 工具列不透明度",
|
||
"full prompts list in a JSON format. value on left side is the frame number": "JSON 格式的完整提示词列表, 左边的值是帧序号",
|
||
"Full quality": "完整品质",
|
||
"Full res mask": "全解析度遮罩",
|
||
"Full res mask padding": "全解析度遮罩的填充预留像素宽度",
|
||
"Fullscreen": "全萤幕",
|
||
"Fullscreen Mode, maximizes the picture so that it fits into the screen and stretches it to its full width": "全萤幕模式, 将图像最大化, 使其符合萤幕, 并拉伸至全尺寸宽度",
|
||
"Fusion": "融合",
|
||
"gallery": "图库",
|
||
"Gallery": "画廊",
|
||
"Gallery height": "(用於输出生成图像的) 画廊高度",
|
||
"Gallery height in _absolute_ percent of your screen (not remaining height)": "图像输出列高度占萤幕的百分比 (非剩馀高度)",
|
||
"Gamepad repeat period, in milliseconds": "遊戏手柄回报率 (单位: 毫秒)",
|
||
"gamma": "伽马值",
|
||
"Gamma": "伽马值",
|
||
"Gamma Correction": "伽马校正 (预處理时检测的图像亮度)",
|
||
"Gap fill technique": "间隙填充技术",
|
||
"Gather": "生成",
|
||
"Gelbooru Prompt": "Gelbooru 提示",
|
||
"Gen": "生成",
|
||
"Gen Options": "生成选项",
|
||
"Gender of the character": "角色性别",
|
||
"General": "一般的",
|
||
"general": "大众级/普通内容（General）",
|
||
"Generate": "产生",
|
||
"GENERATE": "生成",
|
||
"Generate .ebs file.(ebsynth project file)": "生成 .ebs 档案。（Ebsynth 工程档案）",
|
||
"Generate 3D inpainted mesh": "生成 3D着色网格",
|
||
"Generate 3D inpainted mesh. (Sloooow)": "生成 3D inpainted mesh （很慢很慢很慢）",
|
||
"Generate 3D inpainted mesh. (Sloooow, required for generating videos)": "生成最佳化3D网格 (超慢，用於生成影片)",
|
||
"Generate 4 demo videos with 3D inpainted mesh.": "使用 3D 最佳化网格生成4个示範影片",
|
||
"Generate a .ckpt file when saving during training.": "在训练期间储存时产生 .ckpt 档案。",
|
||
"Generate a .ckpt file when training completes.": "在训练完成时产生 .ckpt 档案。",
|
||
"Generate a .ckpt file when training is canceled.": "在训练取消时产生 .ckpt 档案。",
|
||
"Generate a checkpoint at the current training level.": "储存一个位於当前训练进度的模型档案。",
|
||
"Generate a checkpoint at the current training lvel.": "储存一个位於当前训练进度的模型档案。",
|
||
"Generate a mask image.": "生成一个遮罩图像。",
|
||
"Generate a preview image every N steps, 0 to disable": "每隔 N 步生成一次预览图，设定为 0 以停用",
|
||
"generate a prompt from a small base prompt using distilgpt2. Adds a tab with additional control of the model.": "使用 distilgpt2 从小基础提示产生提示。新增一个具有模型额外控制的页籤。",
|
||
"Generate a sequence of images shifting attention in the prompt. This script enables you to give a range to the weight of tokens in a prompt and then generate a sequence of images stepping from the first one to the second.": "根据提示词产生一系列关注逐渐转移的图像。此指令码使你能够在提示词中为标记的权重指定一个範围，然後产生从一端到另一端的一系列图像",
|
||
"Generate all checkpoint preview": "生成所有模型预览图",
|
||
"Generate all checkpoint preview after train finished": "训练完成後生成所有模型的预览图",
|
||
"Generate all possible prompt combinations.": "产生所有可能的提示词组合。",
|
||
"Generate all possible prompts up to a maximum of Batch count * Batch size)": "生成不超过（总批次数 * 每批数量）的所有可能的提示词",
|
||
"Generate All Styles In Order": "顺序生成所有样式",
|
||
"Generate Batch": "批量處理",
|
||
"Generate bounding box": "建立箱体框",
|
||
"Generate Caption": "生成描述文本",
|
||
"Generate Captions": "产生描述",
|
||
"Generate Ckpt": "产生 Ckpt",
|
||
"Generate Class Images": "产生类别(正则) 图像",
|
||
"Generate forever": "无限产生",
|
||
"Generate Graph": "产生图形",
|
||
"Generate graphs from training logs showing learning rate and loss averages over the course of training.": "根据训练日誌生成图表，展示训练过程中的学习率和损失 (Loss) 平均值。",
|
||
"Generate hallways with the depth-to-image model at 512 resolution. It can be tweaked to work with other models/resolutions.": "使用解析度为 512 的深度图像模型产生画廊。它可以调整以适应其他模型 / 解析度。",
|
||
"Generate HeatMap": "生成热力图",
|
||
"Generate human masks": "生成人工遮罩",
|
||
"Generate Info": "产生资讯",
|
||
"Generate inputframes": "生成输入帧",
|
||
"Generate layout for batch process": "生成批量處理的图像分布",
|
||
"Generate layout for single image": "生成单张图像的图像分布",
|
||
"Generate lora weights for extra networks.": "产生附加网路的 LoRA。（警告：如有使用 LoCon功能，需先安装扩充。）",
|
||
"Generate lora weights when saving during training.": "在训练期间储存时产生 LoRA。",
|
||
"Generate lora weights when training completes.": "在训练完成时产生 LoRA。",
|
||
"Generate lora weights when training is canceled.": "在训练取消时产生 LoRA。",
|
||
"Generate me some prompts!": "生成一些提示词",
|
||
"Generate Movie Mode": "影片生成模式",
|
||
"Generate Preview": "产生预览",
|
||
"Generate preview every N frames": "每 N 帧生成预览",
|
||
"Generate preview images every N epochs.": "每 N Epochs 生成一张预览图",
|
||
"Generate preview images every N steps.": "每 N 步生成一次预览图像",
|
||
"Generate preview video during generation? (Preview does not include frame interpolation or upscaling.)": "在生成过程中生成预览影片? (预览影片不包括帧插值或放大)",
|
||
"Generate random prompts from lexica.art (your prompt is used as a search query).": "从 lexica.art 产生随机提示词（你的提示词会被用作搜寻查询）",
|
||
"Generate Sample Images": "产生样本图像",
|
||
"Generate sample images using the currently saved diffusers model.": "使用当前储存的 diffusers 模型生成样本图像。",
|
||
"Generate Samples": "产生样本",
|
||
"Generate simple 3D mesh": "生成简单 3D网格",
|
||
"Generate simple 3D mesh. (Fast, accurate only with ZoeDepth models and no boost, no custom maps)": "生成简单3D网格 (快速, 仅适用於 ZoeDepth 模型, 无 Boost, 无 Maps)",
|
||
"Generate Skeleton/Depth/Normal/Canny Map": "生成骨架/深度(Depth)/法缐(Normal)/硬边缘描缐(Canny)图",
|
||
"Generate Stereo anaglyph image (red/cyan)": "生成 anaglyph 立体图（红/蓝）",
|
||
"Generate Stereo side-by-side image": "生成并排立体图像 (side-by-side image)",
|
||
"Generate stereoscopic image(s)": "生成立体图像",
|
||
"Generate video": "生成影片",
|
||
"Generate Video": "产生影片",
|
||
"Generate video from inpainted mesh.": "从 inpainted mesh 生成影片",
|
||
"Generate video from inpainted(!) mesh.": "从深度图生成影片。",
|
||
"Generated Caption": "已产生的描述",
|
||
"Generated psd file": "生成的 .psd 档案",
|
||
"Generated video": "生成影片",
|
||
"Generates anime tags using databases and models for tokenizing.": "使用资料库和分词模型产生动漫标籤。",
|
||
"Generates highlighted sectors of a submitted input image, based on input prompts. Use with tokenizer extension. See the readme for more info.": "根据输入提示词产生输入图像的突出显示区域。需与 Tokenizer 扩充功能一起使用。详细资讯请参阅自述档案。",
|
||
"Generation": "生产",
|
||
"Generation Info": "生成资讯",
|
||
"Generation mode": "生成模式",
|
||
"Generation Parameters": "生成参数",
|
||
"Generation Settings": "生成设定",
|
||
"Generation settings:": "生成设定:",
|
||
"Generation TEST!!(Ignore Project directory and use the image and mask specified in the main UI)": "生成测试!!（忽略工程目录，使用使用者介面中指定的图像和遮罩）",
|
||
"Generation will stop after finishing this image, click again to stop immediately.": "完成当前图像的生成後将中止生成，再次单击可立即中止。",
|
||
"Generator device": "生成装置",
|
||
"genitalia.pt": "genitalia.pt (写实 生殖器)",
|
||
"German localization": "德语本地化",
|
||
"Get Civitai Model Info by Model Page URL": "从 Civitai 模型页面网址拉取模型资讯",
|
||
"Get comma-separated list of models (for XY Grid)": "生成逗号分隔的模型列表(方便X/Y表使用)",
|
||
"Get javascript logs": "获取 Javascript 日誌",
|
||
"Get List": "获取列表",
|
||
"Get mask": "获取遮罩",
|
||
"Get mask as alpha of image": "将遮罩用於 Alpha 通道图",
|
||
"Get Model Info by Civitai Url": "通过 Civitai 网址获取模型资讯",
|
||
"Get Model Info from Civitai": "从 Civitai 上获取模型资讯",
|
||
"Get Model Info from Civitai by URL": "从 Civitai 网址获取模型资讯",
|
||
"Get prompt from:": "从此處获取提示词：",
|
||
"Get sub directories": "读取子目录",
|
||
"Get Tags": "获取标籤",
|
||
"Getting Started": "新手上路",
|
||
"GFPGAN": "GFPGAN 更还原",
|
||
"GFPGAN as Face enhancer": "使用 GFPGAN 增强脸部",
|
||
"GFPGAN vis.": "GFPGAN 可见程度",
|
||
"GFPGAN visibility": "GFPGAN 可见度",
|
||
"gif2gif": "GIF生GIF",
|
||
"git version info": "Git 版本资讯",
|
||
"github": "GitHub",
|
||
"Give a similarity score between two images (only first face is compared).": "输出两张图像中脸部的相似度分数 (仅比较第一张脸部)",
|
||
"give it a star on GitHub": "在 GitHub 上给它一颗星星",
|
||
"GLOB patterns (comma separated)": "待匹配的 GLOB 模板 (以英文逗号分割)",
|
||
"Glob recursively with input directory pattern": "输入目录模式全域递迴",
|
||
"Global Post-Processing": "全域後期處理设定",
|
||
"Global-Inpainting (all faces)": "全域重绘 (所有脸部)",
|
||
"Glow": "辉光",
|
||
"Glow mode": "辉光模式",
|
||
"Go to Settings → User Interface → Quick Settings List, add sd_unet. Apply these settings, then reload the UI.": "前往设定 → 使用者介面 → 快捷设定列表，新增 sd_unet → 储存设定 → 重载 UI 。",
|
||
"Gold Pendant": "装饰艺术",
|
||
"Gothic": "Gothic (哥特)",
|
||
"grad": "梯度",
|
||
"Grad Accumulation Steps": "梯度累加步数 (Grad Accumulation Steps)",
|
||
"Gradient accumulation steps": "梯度累加步数",
|
||
"Gradient Accumulation Steps": "梯度累积叠代步数",
|
||
"Gradient Checkpointing": "梯度进度记录",
|
||
"Gradient clip value": "梯度剪裁值",
|
||
"Gradient Clipping": "梯度修剪",
|
||
"gradio launch": "启动 Gradio",
|
||
"Gradio theme": "Gradio 主题",
|
||
"Gradio theme (requires restart)": "Gradio 主题样式 (需重启)",
|
||
"Graffiti": "Graffiti (塗鸦)",
|
||
"Graph Smoothing Steps": "图形平滑步骤",
|
||
"graphic design": "graphic design (平面设计)",
|
||
"gray": "灰度",
|
||
"Great": "很好的",
|
||
"greg mode": "greg mode (Greg Mike: 美国艺术家)",
|
||
"Grid layout": "网格布局",
|
||
"Grid margins (px)": "网格边距（px）",
|
||
"Grid row count; use -1 for autodetect and 0 for it to be same as batch size": "宫格图行数； 使用 -1 进行自动检测，使用 0 使其与每批数量相同",
|
||
"Ground Color": "地面颜色",
|
||
"GroundingDINO + Segment Anything can achieve [text prompt]->[object detection]->[segmentation]": "GroundingDINO + Segment Anything 可以实作 [文本提示词]->[物件检测]->[语义分割]",
|
||
"GroundingDINO batch progress status": "GroundingDINO 批量處理状态",
|
||
"GroundingDINO Box Threshold": "GroundingDINO 箱体阈值",
|
||
"GroundingDINO Detection Prompt": "GroundingDINO 检测提示词",
|
||
"GroundingDINO Model (Auto download from huggingface)": "GroundingDINO 模型 (自动从 huggingface 下载)",
|
||
"Group/split table by: (when not started with single quote - so only for prompts, not for merge)": "提示词分组方式（非单引号开头时）：",
|
||
"Grunge": "Grunge (垃圾摇滚)",
|
||
"GTA": "GTA (侠盗猎车手)",
|
||
"Guess Mode": "无提示词引导模式",
|
||
"Guess what - this will be incredibly slow, but it will work for < 8GB GPUs.": "你猜怎麼着 - 这将非常地慢我的老伙计，但它适用於 < 8GB 显存(VRAM)的 GPU",
|
||
"Guidance End (T)": "引导终止时机",
|
||
"Guidance scale": "引导系数",
|
||
"Guidance scale webui": "webui CFG 引导系数",
|
||
"Guidance Start (T)": "引导介入时机",
|
||
"Guidance strength (T)": "引导强度（迭代参与%，Guidance strength）",
|
||
"Guided Images": "引导图像",
|
||
"Guided images schedules": "图像引导参数表",
|
||
"Hair": "头髮",
|
||
"haku-img": "HAKU 图像工具",
|
||
"haku_output": "Haku 输出",
|
||
"HakuImg": "Haku 图像處理",
|
||
"Half": "半精度",
|
||
"Half Model": "半精度模型",
|
||
"Half tile offset pass": "半图块偏移过滤",
|
||
"Half tile offset pass + intersections": "半图块偏移过滤 + 交集",
|
||
"Hand Size": "手掌尺寸",
|
||
"hand_yolov8n.pt": "hand_yolov8n.pt (2D / 写实 手)",
|
||
"hand_yolov8s.pt": "hand_yolov8s.pt (2D / 写实 手)",
|
||
"Hands": "手掌",
|
||
"Happy prompting!": "祝写提示词愉快！",
|
||
"hard_light": "实光",
|
||
"Has EMA:": "有 EMA：",
|
||
"has metadata": "有中继资料",
|
||
"has user metadata": "有使用者中继资料",
|
||
"hash": "杂凑值",
|
||
"Hash:": "杂凑值: ",
|
||
"Hat": "帽子",
|
||
"Head Size": "头部尺寸",
|
||
"Heatmap blend alpha": "热度图混合透明度",
|
||
"Heatmap image scale": "热度图缩放比例",
|
||
"HED Resolution": "HED 解析度（HED Resolution）",
|
||
"height": "高度",
|
||
"Height": "高度",
|
||
"Height 1": "高度 1",
|
||
"Height 2": "高度 2",
|
||
"Height of the image editor": "图像编辑器高度",
|
||
"Height Resolution": "高度解析度",
|
||
"Help": "帮助",
|
||
"Help for Jinja2 templates": "Jinja2 模板帮助",
|
||
"Helper": "助手",
|
||
"here": "这裡",
|
||
"Here, a random number between 1 and 3 words from adjective.txt will be chosen and joined together with the word 'and' instead of the default comma.": "此處，会从 adjective.txt 中选取随机 1 至 3 行，以 'and'（而不是预设的逗号）拼接",
|
||
"Heun": "Heun（不）",
|
||
"Hidden SSID": "隐藏 SSID",
|
||
"Hidden UI tabs": "选择需要隐藏的标籤列",
|
||
"Hidden UI tabs (requires restart)": "需要隐藏的 UI 页籤 (需要重启)",
|
||
"Hide": "隐藏",
|
||
"Hide \"auto-sd-paint-ext Guide/Panel\" after restart.": "重启後隐藏 \"auto-sd-paint-ext Guide/Panel\" 面板",
|
||
"Hide accordion by default": "预设隐藏手风琴 UI",
|
||
"Hide annotator result": "隐藏预處理预览结果",
|
||
"Hide caption": "隐藏描述",
|
||
"Hide checked Civitai Helper buttons on model cards": "隐藏已选中的出现在模型卡片上 Civitai 助手按钮",
|
||
"Hide early access models": "隐藏抢鲜体验模型",
|
||
"Hide extensions with tags": "隐藏含有以下标记的扩充工具",
|
||
"Hide heatmap images": "隐藏热度图",
|
||
"Hide hidden": "隐藏标记为隐藏的图像",
|
||
"Hide networks of unknown versions for model versions": "为以下所选的模型版本隐藏未知版本的模型",
|
||
"Hide Non-API Components (Restarts UI)": "隐藏非 API 组件（需重启 UI）",
|
||
"Hide samplers in user interface": "隐藏使用者介面中的採样方法",
|
||
"Hide samplers in user interface (requires restart)": "在使用者介面中隐藏採样方法 (需重启)",
|
||
"Hide sub-folders that start with a '.'": "隐藏以 \" . \" 开头的子目录",
|
||
"Hide sub-folders that start with a .": "隐藏名称以英文半角句号 \" . \" 开头的子目录",
|
||
"Hide subprompt masks in prompt mode": "在提示词模式下隐藏次级提示词遮罩",
|
||
"High": "高",
|
||
"High res only": "仅高解析度",
|
||
"Higher levels increases complexity and randomness of generated prompt": "随机等级越高, 生成的提示词越複杂和随机",
|
||
"Highest Rated": "Highest Rated (最高评分)",
|
||
"Highres. Denoising Strength": "高解析度修复：重绘幅度",
|
||
"Highres. fix": "高解析度修复",
|
||
"Highres. Height": "高解析度修复：第一遍高度",
|
||
"Highres. percentage chance": "高解析度修复：随机机率",
|
||
"Highres. Width": "高解析度修复：第一遍宽度",
|
||
"Hips": "臀部尺寸",
|
||
"Hires CFG": "高分修复提示词引导系数",
|
||
"Hires checkpoint": "高解析度模型权重存档点",
|
||
"Hires fix: show hires checkpoint and sampler selection": "高解析度修复: 显示高分模型和採样方法选项",
|
||
"Hires fix: show hires prompt and negative prompt": "高解析度修复: 显示高解析度修复的正反提示词输入框",
|
||
"Hires fix: show hires sampler selection": "高解析度修复: 显示高分採样方法选择列",
|
||
"Hires fix: which pass to enable refiner for": "高解析度修复: 选择需要启用 refiner 模型的层",
|
||
"Hires Negative prompt": "高分修复反向提示词",
|
||
"Hires negative prompt": "高解析度反向提示词",
|
||
"Hires Prompt": "高分修复正向提示词",
|
||
"Hires prompt": "高解析度提示词",
|
||
"Hires sampling method": "高解析度取样方法",
|
||
"Hires Sampling method": "高解析度修复採样方法",
|
||
"Hires steps": "高解析步骤",
|
||
"hires upscaler": "高解析度修复放大演算法",
|
||
"Hires upscaler": "高解析度放大工具",
|
||
"Hires-Fix Option": "高解析度修复选项",
|
||
"hires. fix": "高解析度修复",
|
||
"Hires. fix": "高解析度修正（Hires. fix）",
|
||
"Hires. fix+": "高分修复PLUS",
|
||
"Hires. fix+ to do steps optimization": "高分修复 PLUS 来最佳化迭代步数的话",
|
||
"hires_denoising_strength": "高解析度修正重绘幅度",
|
||
"hires_fix": "高解析度修正",
|
||
"hires_steps": "高解析步骤",
|
||
"hires_upscaler": "高解析度放大工具",
|
||
"hiresfix": "高清修复",
|
||
"Historical": "Historical (当前帧前的倒数第二帧)",
|
||
"History": "历史记录",
|
||
"Homepage": "主页",
|
||
"horizontal": "水平",
|
||
"Horizontal": "水平",
|
||
"Horizontal Mirroring": "水平镜像",
|
||
"horizontal only": "仅水平方向",
|
||
"horizontal split num": "水平分割数",
|
||
"Horizontal+Vertical Mirroring": "垂直+水平镜像",
|
||
"Horror": "Horror (恐怖)",
|
||
"Hough distance threshold (MLSD)": "霍夫距离阈值（Hough distance threshold）（MLSD）",
|
||
"Hough Resolution": "霍夫解析度（Hough Resolution）",
|
||
"Hough value threshold (MLSD)": "霍夫值阈值（Hough value threshold）（MLSD）",
|
||
"how close to get to the colors of the input frame image/ the amount each frame during a tweening step to use the new images colors": "贴合输入帧图像的颜色的程度 / 在中间计算步骤中使用新图像颜色的每帧数量",
|
||
"how closely the image should conform to the prompt. Lower values produce more creative results. (recommended range 5-15)": "图像应符合提示词的程度。较低的值会产生更具创造性的结果。（建议範围5-15）",
|
||
"how closely the image should conform to the prompt. Lower values produce more creative results. (recommended range 5-15)`": "图像与提示词的相符程度。较低的数值会产生更有创意的结果 (推荐範围: 5-15)",
|
||
"How many batches of images to create": "建立多少批量次数的图像",
|
||
"How many batches of images to create (has no impact on generation performance or VRAM usage)": "要产生多少批图像（对产生效能或 VRAM 使用没有影响）。",
|
||
"How many classification images to use per instance image.": "每个实例图像使用类别图像的数量。",
|
||
"How many classifier/regularization images to generate at once.": "一次生成多少分类/正则化图像。",
|
||
"How many image to create in a single batch": "每批建立多少图像",
|
||
"How many image to create in a single batch (increases generation performance at cost of higher VRAM usage)": "在一个批次中产生的图像数量，增加这个数量可以加快图像产生速度，但会增加 VRAM 的使用量。",
|
||
"How many images to process at once per training step?": "每步训练要處理多少张图像？",
|
||
"How many results to load at once": "一次载入多少个结果",
|
||
"How many samples to generate per subject.": "每个主题生成多少样本图像。",
|
||
"How many steps to wait before applying semantic guidance, default 10": "在套用语义引导之前需要等待多少步，预设为 10",
|
||
"How many times to improve the generated image iteratively; higher values take longer; very low values can produce bad results": "叠代改进产生的图像多少次；更高的值需要更长的时间；非常低的值会产生不好的结果",
|
||
"how many times to interpolate the source video. e.g source video fps of 12 and a value of x2 will yield a 24fps interpolated video": "源影片插值次数 (例如, 源影片帧数为12, 插值次数X为2, 则生成一个24帧的插值影片)",
|
||
"How many times to process an image. Each output is used as the input of the next loop. If set to 1, behavior will be as if this script were not used.": "设定图像處理的迴圈次数，每次迴圈的输出会作为下一个迴圈的输入。若设定为1，则行为会像没有使用此脚本一样。",
|
||
"How many times to repeat processing an image and using it as input for the next iteration": "重複處理图像并用作下次迭代输入的次数",
|
||
"How many timesteps to smooth graph data over. A lower value means a more jagged graph with more information, higher value will make things prettier but slightly less accurate.": "平滑图表数据的时间步数。数值越小，图表越参差不齐，但信息量越多；数值越大，图表越漂亮，但准确性稍差。",
|
||
"How Many To Generate": "生成数量",
|
||
"How much an image region can change before the original pixels are not blended in anymore.": "一个图像区域在原始像素不再混合之前可以改变的程度。",
|
||
"How much of noise from each octave is added on each iteration. Higher values will make it more straighter and sharper, while lower values will make it rounder and smoother. It is limited by 1.0 as the resulting gain fill the frame completely with noise.": "每次迭代时，每个倍频程的噪点增加量。数值越大越平直、越锐利，数值越小越圆滑。它的最大限制值为 1.0 ，该数值所产生的增益会使整个画面充满噪点。",
|
||
"how much the image should look like the previou one and new image frame init. strength schedule might be better if this is higher, around .75 during the keyfames you want to switch on": "上一图像和现在的图像的相似程度和新图像的初始化强度。设定更高的值对强度调度计劃会更好，在你想切换关键帧中，围绕 0.75 设定",
|
||
"How much to blur the mask before processing, in pixels.": "處理前要对遮罩进行多强的模糊，以画素为单位",
|
||
"How often, in seconds, to flush the pending tensorboard events and summaries to disk.": "多少秒刷新一次待办 TensorBoard 事件和摘要到磁碟上",
|
||
"How sharp the transition should be between blended and not blended.": "混合与非混合之间的过渡尖锐程度。",
|
||
"How should Style Names Rendered on UI": "样式名称的 UI 渲染方式",
|
||
"How strong of a variation to produce. At 0, there will be no effect. At 1, you will get the complete picture with variation seed (except for ancestral samplers, where you will just get something).": "想要产生多强烈的变化。设为 0 时，将没有效果。设为 1 时，你将获得完全产自差异随机种子的图像（此功能对带有 a 後缀的取样器无效）",
|
||
"How strongly partially masked content should be preserved.": "部分遮罩内容应被保留的强度。",
|
||
"How strongly the original mask should bias the difference threshold.": "原始遮罩偏离差异阈值的程度。",
|
||
"How to complete nested wildcard paths": "万用字元嵌套路径补全方式",
|
||
"How to complete nested wildcard paths (e.g. \"hair/colours/light/...\")": "万用字元嵌套路径补全方式 (例如: \"hair/colors/light/...\")",
|
||
"How to handle input image?": "如何處理输入图像",
|
||
"hue": "色相",
|
||
"Hug-the-middle": "保留核心（Hug-the-middle）",
|
||
"huge batch query (TF 2.10, experimental)": "巨量批次查询 (TF 2.10, 实验性)",
|
||
"HuggingFace cache directory, see huggingface_hub guides/manage-cache": "HuggingFace 缓存目录, 检视 huggingface_hub guides/manage-cache",
|
||
"Huggingface token": "Huggingface 令牌",
|
||
"HuggingFace Token": "HuggingFace 标记",
|
||
"humanoid - A random humanoid, males, females, fantasy types, fictional and non-fictional characters. Can add clothing, features and a bunch of other things.": "humanoid - 人形 - 一个随机的人形生物，男性、女性、幻想类型，虚构或非虚构的生物。可以新增服装，特徵和其他东西。",
|
||
"Humans Masking": "人工遮罩",
|
||
"Hybrid composite": "混合合成模式",
|
||
"Hybrid motion": "混合运动模式",
|
||
"Hybrid motion may be used with hybrid composite off, to just use video motion.": "混合运动模式可以在关闭混合合成的情况下使用, 针对影片运动",
|
||
"Hybrid Schedules": "合成调度计劃",
|
||
"Hybrid Settings": "混合设定",
|
||
"Hybrid Video": "混合影片",
|
||
"Hybrid Video Compositing in 2D/3D Mode": "2D/3D 模式下的混合影片合成",
|
||
"Hybrid Video Schedules": "影片混合调度计劃",
|
||
"hybrid_comp_mask_auto_contrast": "自动对比度合成遮罩",
|
||
"hybrid_comp_mask_blend_alpha_schedule": "合成遮罩透明度混合调度计劃",
|
||
"hybrid_comp_mask_type": "合成遮罩类型",
|
||
"Hypernet str.": "超网络 (Hypernetwork) 强度",
|
||
"Hypernetwork": "超网路",
|
||
"Hypernetwork Learning rate": "超网路学习率",
|
||
"Hypernetwork strength": "超网络 (Hypernetwork) 强度",
|
||
"Hypernetwork strengths": "超网络强度",
|
||
"Hypernetwork-Monkeypatch-Extension": "Hypernetwork-Monkeypatch-扩充套件",
|
||
"Hypernetwork: refresh": "超网络 (Hypernetwork): 刷新",
|
||
"Hypernetworks": "超网路（Hypernetwork）",
|
||
"Hypernetworks List": "可选的超网络列表",
|
||
"Hyperrealism": "Hyperrealism (超现实主义-艺术)",
|
||
"HyperTile Integrated": "HyperTile Integrated 高解析度图像分块處理",
|
||
"Hypertile U-Net max depth": "Hypertile U-Net 最大深度",
|
||
"Hypertile U-Net max tile size": "Hypertile U-Net 最大分块尺寸",
|
||
"Hypertile U-Net swap size": "Hypertile U-Net 交换规模",
|
||
"Hypertile VAE max depth": "Hypertile VAE 最大深度",
|
||
"Hypertile VAE max tile size": "Hypertile VAE 最大分块尺寸",
|
||
"Hypertile VAE swap size": "Hypertile VAE 交换规模",
|
||
"I know what I am doing.": "我知道我在做什麼。",
|
||
"I recommend creating an image with txt2img and then sending the result to img2img with the prompt and settings. For this script I use these settings..": "建议使用文生图生成图像并连同参数及提示词發送到图生图使用。对於此脚本作者推荐以下参数：",
|
||
"I want to preview GroundingDINO detection result and select the boxes I want.": "我想预览 GroundingDINO 的结果并选择我想要的箱体。",
|
||
"I'm feeling lucky": "手气不错",
|
||
"I've finished my sketch": "完成绘製",
|
||
"ID input": "ID 输入",
|
||
"Idea and inspiration by xKean.": "这个创意受 xKean 启發。",
|
||
"Idea by redditor jonesaid.": "这个创意来自於 redditor: jonesaid 。",
|
||
"Identifer:BlockID:Elements:Ratio,...,separated by empty line": "辨识名:区块ID:组件:权重,...,用空行分隔",
|
||
"Ids for tokenization (example: 9061, 631, 736)": "用於标记化的 ID（例：9061，631，736）",
|
||
"If \"Save a copy of image before doing face restoration.\" is enabled, save every image during rolling generation": "如果 \"在进行脸部修复前储存图像副本 \" 选项启用，则梯度放大倍数生成时储存每张图像",
|
||
"If $$ is not provided, then 1$$ is assumed.": "若没提供 $$，预设为 1$$",
|
||
"If .srt file is saved, soft-embed the subtitles into the rendered video file": "如果储存了 .srt 档案，则将该字幕档案软嵌入到渲染的影片档案中",
|
||
"If a model was extracted or trained with EMA weights, these will be appended separately to the model for use in training later.": "若模型是提取或者和 EMA 权重一同训练，这些权重会单独新增到模型中，供以日後训练使用。",
|
||
"If an image is specified below, it will be used with highest priority.": "如果在下面指定的一张图像，它将以最高优先级使用。",
|
||
"If an image is too large, crop it from the center.": "如果图像太大，则从中心裁剪掉边缘",
|
||
"If blank or set to 0, parameters in the \"txt2img\" tab are used.": "如留空或设定为 0，则使用 \"文生图\" 页籤中的参数",
|
||
"If checked, the modified area will appear around the edges of the image. If unchecked, the modified area will appear in the center of the image.": "若选中，修改区域将出现在图像的边缘；若不选中，修改区域将显示在图像的中心。",
|
||
"If Deforum crashes due to CN updates, go": "如果 Deforum 由於 ControlNet 版本更新而崩溃，请前往",
|
||
"If EMA weights are saved in a model, these will be extracted instead of the full Unet. Probably not necessary for training or fine-tuning.": "如果模型中储存了 EMA 权重，则提取该权重，而不是完整的 Unet 。\n训练或微调也许没有必要勾选。",
|
||
"If Empty": "如果为空",
|
||
"If enabled, changes the behavior or hybrid_motion to captures motion by comparing the current video frame to the previous rendered image, instead of the previous video frame.": "如启用，将改变混合运动模式的行为，通过比较当前影片帧和上一帧渲染图像来捕获运动，而不是和上一帧影片帧比较。",
|
||
"If enabled, only images will be saved": "启用时, 仅储存图像",
|
||
"if enabled, raw imgs will be deleted after a successful video/ videos (upsacling, interpolation, gif) creation": "如启用, 则在成功建立影片/其他项目 (放大，插值，gif) 後删除原始图像",
|
||
"If loading of the Yolov5_anime model fails, check": "如果 Yolov5_anime 模型载入失败，请检视",
|
||
"If multiple .ebs files are generated, run them all.": "如果生成了多个 .ebs 档案，则需要全部执行。",
|
||
"If non-deforum frames, use the correct number of counting digits. For files like 'bunnies-0000.jpg', you'd use 'bunnies-%04d.jpg'": "如果不是 Deforum 的帧图像, 请使用正确的计数位数。对於像 'bunnies-0000.jpg' 这样的档案, 需使用 'bunnies-%04d.jpg'",
|
||
"If out-* directory already exists in the Project directory, delete it manually before executing.": "如果out-*目录已经存在於工程目录中，请在执行前手动删除它。",
|
||
"If PNG image is larger than 4MB or any dimension is larger than 4000, downscale and save copy as JPG": "如果 PNG 图像大於 4MB 或宽高之一大於 4000，则缩小并储存副本为 JPG 图像",
|
||
"If setting2prompt width, which width-ratio between both columns (0: minimize setting, 1: 50/50, 6: minimize output gallery column)": "设定文生图, 图生图双列宽度比 (0: 最小化左侧列宽度, 1: 双侧列各占50%宽度, 6: 最小化右侧图像输出列)",
|
||
"If setting2prompt width, which width-ratio between both columns (0: minimize setting, 1: 50/50, 6: minimize output gallery column)": "设定文生图, 图生图双列宽度比 (0: 最小化左侧列宽度, 1: 双侧列各占50%宽度, 6: 最小化右侧图像输出列)",
|
||
"If Smart-Step is enabled, the number of iterations for Hires. fix will never be less than this:": "如果启用最佳化迭代步数，高解析度修复的迭代步数将永远不会少於本选项设定的数值：",
|
||
"If the chosen number of terms is greater than the available terms, then some terms will be duplicated, otherwise chosen terms will be unique. This is useful in the case of wildcards, e.g.": "选的项数多於提供的项数时，有些项会重複，其馀情况各选项会保持唯一；\n重複对於万用字元很有用，例如：",
|
||
"If the ControlNet Plugin is enabled, which do you use first?": "若 ControlNet 扩展已启用，优先使用的是？",
|
||
"If the groups wont drop down click": "如果无法下拉组，点击",
|
||
"If the number of tokens is more than the number of vectors, some may be skipped.\nLeave the textbox empty to start with zeroed out vectors": "如果标记数量大於向量数量，则可能会被跳过。\n留下文字方块空白以开始填零的向量",
|
||
"If the saved image file size is above the limit, or its either width or height are above the limit, save a downscaled copy as JPG": "当图像档案大小或尺寸超过限制，另存一份缩小的副本为 JPG 格式",
|
||
"If this is set, then random prompts are generated, even if the seed is the same.": "如果设定了此项，则会产生随机提示词，即使种子相同。",
|
||
"If this option is enabled, watermark will not be added to created images. Warning: if you do not add watermark, you may be behaving in an unethical manner.": "如果启用此选项，水印将不会新增到生成出来的图像中。警告：如果你不新增水印，你的行为可能是不符合专业操守的",
|
||
"If this option is selected, many extra frames will be output for the various processes into the hybridframes folder.": "如启用本选项, 额外帧会输出到多种程序的混合帧目录",
|
||
"If this values is non-zero, it will be added to seed and used to initialize RNG for noises when using samplers with Eta. You can use this to produce even more variation of images, or you can use this to match images of other software if you know what you are doing.": "如果这个值不为零，它将被加入到随机种子中，并在使用带有 Eta 的取样器时用於初始化随机噪点。你可以使用它来产生更多的图像变化，或者你可以使用它来模仿其他软体生成的图像，如果你知道你在做什麼",
|
||
"If true, instead of sending the flattened image, will send just the currently selected layer.": "如果勾选，将不發送拼合後的图像，而只發送当前选中的图层。",
|
||
"If using a blend mask, this controls the blend amount of the video and render for the composite mask.": "如使用混合遮罩，则控制影片的混合量和合成遮罩的渲染量。",
|
||
"If using autocontrast option, this is the high cutoff for the operation.": "如使用自动对比度选项，这是对比度操作的最高隔断值。",
|
||
"If using autocontrast option, this is the low cutoff for the operation.": "如使用自动对比度选项，这是对比度操作的最低隔断值。",
|
||
"If you are using these templates, please let me know if they are useful.": "如果你在用这些模板，请告诉我它们是否有用",
|
||
"If you do not know the path, try opening the folder in Explorer and copying the path": "如果不知道路径，可以尝试在资源管理器开启目录後複製路径",
|
||
"If you do not like the selection, you can modify it manually.": "如果你不喜欢这些选择，你可以手动修改它。",
|
||
"If you have already created a background video in Invert Mask Mode([Ebsynth Utility]->[configuration]->[etc]->[Mask Mode]),": "如果你已经在反相遮罩模式下建立了一个背景影片（[Ebsynth Utility]->[延伸模组组态]->[其他]->[遮罩模式]），",
|
||
"If you have any issues please visit": "如有任何问题欢迎浏览 ",
|
||
"If you have bad results and don't want to fine-tune here, just enable Codeformer in \"Global Post-Processing\".": "若生成了不好的结果图像但又不想从此處微调，那就在 \"全域後期處理\" 中启用 Codeformer",
|
||
"If you have trouble entering the video path manually, you can also use drag and drop.For large videos, please enter the path manually.": "如果你手动输入影片路径嫌麻烦，也可以使用拖放。但是对於大型影片，还是烦请手动输入路径。",
|
||
"If you liked this extension, please": "如果您喜欢这个延伸模组，请",
|
||
"If you still cannot understand, use default.": "如果你仍然无法理解，请保持预设值。",
|
||
"If you want to": "如果你想",
|
||
"If you want to display the original model as well for comparison": "如果你同时想显示原本模型以做对比",
|
||
"If you want to use the same tagging results the next time you run img2img, rename the file to prompts.txt": "如果想在下次执行图生图时使用同样的标记结果，请将该档案重命名为 prompts.txt",
|
||
"If you want to use Width/Height which are not multiples of 64, please change noise_type to 'Uniform', in Keyframes --> Noise.": "如果您想使用非 64 的倍数作为宽度/高度，请在关键帧 --> 噪音中将 噪音类型（noise_type） 设置为 '均匀分佈（Uniform）'。",
|
||
"iFrame height": "Photopea 介面高度",
|
||
"ignore": "无视",
|
||
"Ignore": "忽略",
|
||
"Ignore black area": "忽略黑色区域",
|
||
"Ignore emphasis": "忽略强调符号",
|
||
"Ignore faces larger than specified size": "忽略大於设定尺寸的脸",
|
||
"Ignore mask on ControlNet input image if control type is not inpaint": "若控制类型未设定为 “区域重绘” 时忽略 ControlNet 输入图像上的遮罩",
|
||
"Ignore matching rules when collecting the class dataset. (# of class images must still be configured on the concepts tab).": "收集类别数据集时无视符合规则。(# 仍须在概念页籤上组态类别图像的数量)",
|
||
"Ignore sd-webui grammar": "忽略 SD-WebUI 语法",
|
||
"Ignore selected VAE for stable diffusion checkpoints that have their own .vae.pt next to them": ".vae.pt 模型权重存档点在名称相同时，忽略掉选中的 VAE",
|
||
"Ignore the negative prompt. Magic Prompt and I'm feeling lucky generate negative prompts by default, check this to disable that functionality.": "忽略反向提示词\n魔法提示词和手气不错预设生成反向提示词，勾选此选项以停用这种功能",
|
||
"Ignore whitespace in prompts: All newlines, tabs, and multiple spaces are replaced by a single space": "忽略提示中的空格：所有换行符号、定位点和多个空格都会被替换为一个空格。",
|
||
"Ignore: keep prompt and styles dropdown as it is.": "忽略: 保持提示词和预设样式下拉选单不变",
|
||
"Ignores step count - uses a number of steps determined by the CFG and resolution": "忽略步骤数，使用由 CFG 和解析度确定的步骤数",
|
||
"Illustration": "插画",
|
||
"image": "图像",
|
||
"Image": "映像档",
|
||
"Image border outfill method:": "图像边缘的填充方法：",
|
||
"Image browser": "图库浏览器",
|
||
"Image Browser": "图库浏览器",
|
||
"Image Browser Settings": "Cozy 图库浏览器设定",
|
||
"Image CFG": "图像引导系数(CFG)",
|
||
"Image CFG Scale": "图像提示词相关性",
|
||
"Image Count": "图像数",
|
||
"Image creation progress preview mode": "图像生成过程预览模式",
|
||
"Image data view": "图像数据检视",
|
||
"Image Directory": "图像目录",
|
||
"Image File": "图像档案",
|
||
"Image for Auto Segmentation": "用於语义分割的图像",
|
||
"Image for Image Layout": "用於图像分布的图像",
|
||
"Image for img2img": "图生图的图像",
|
||
"Image for inpainting with mask": "用於区域重绘并手动画遮罩的图像",
|
||
"Image for Recognition": "辨识图像的解析度",
|
||
"Image for Segment Anything": "用於分离的图像",
|
||
"Image Generation Library": "图像生成",
|
||
"Image Generation Scheduler": "图像生成採样方式",
|
||
"Image height": "图像高度",
|
||
"Image Init": "图像初始化",
|
||
"Image Input": "图像输入",
|
||
"image into latent space representation and back. Latent space representation is what stable diffusion is working on during sampling\n(i.e. when the progress bar is between empty and full). For txt2img, VAE is used to create a resulting image after the sampling is finished.\nFor img2img, VAE is used to process user's input image before the sampling, and to create an image after sampling.": " 图像和潜空间表徵互相转换。潜空间表徵是 Stable Diffusion 在採样过程中的实际操作物件。(即进度条處於 \"空\" 和 \"满\" 之间的状态)。\n对于文生图，VAE 仅用於在採样完成後建立 RGB 图像。\n对於图生图，VAE 用於在採样前把使用者输入的图像處理为潜空间表徵，并在採样後建立 RGB 图像。",
|
||
"Image Layout": "图像分布",
|
||
"Image layout status": "图像分布状态",
|
||
"Image Parameters": "图像参数",
|
||
"Image path": "图像路径",
|
||
"Image preview height": "图像预览高度",
|
||
"Image Processing": "图像處理",
|
||
"Image strength schedule": "图像强度调度计劃",
|
||
"Image Tags": "图像标籤 (Tags)",
|
||
"Image to 3D": "图转 3D",
|
||
"Image to 3D mesh": "图像转 3D 网格",
|
||
"Image to be masked": "需要叠加遮罩的图像",
|
||
"Image utils extension. Allows blending, layering, hue and color adjustments, blurring and sketch effects, and basic pixelization.": "图像工具扩充套件。允许混合、分层、色调和颜色调整、模糊和素描效果，以及基本的像素化。",
|
||
"Image width": "图像宽度",
|
||
"Image with MD5 Hash": "以 MD5 杂凑值命名的图像档案",
|
||
"Images Browser": "图库浏览器",
|
||
"Images directory": "图像目录",
|
||
"Images filename pattern": "图像档案名格式",
|
||
"Images folder": "图像目录",
|
||
"Images path": "图像路径",
|
||
"Images to use for keyframe guidance": "用於关键帧引导的图像",
|
||
"img2img": "图生图",
|
||
"img2img alternative test": "图生图的另一种测试",
|
||
"img2img CFG": "图生图的提示词引导系数",
|
||
"img2img DDIM discretize": "图生图 DDIM 离散化",
|
||
"img2img denoise strength": "图生图的重绘幅度",
|
||
"img2img history": "图生图历史记录",
|
||
"Img2Img input will be used if no ControlNet input is specified.": "若不指定 ControlNet 输入图，将使用图生图输入的图像",
|
||
"img2img keyframes.": "将关键帧进行图生图。",
|
||
"img2img model to use": "图生图使用的模型",
|
||
"img2img padding": "图生图的预留像素宽度",
|
||
"Img2Img Repeat Count (Loop Back)": "图生图重複次数（回送）",
|
||
"img2img sampler": "图生图的採样方法",
|
||
"img2img Sampling steps": "图生图的採样迭代步数",
|
||
"img2img scale": "图生图的放大倍数",
|
||
"Img2Img Settings:": "图生图设定：",
|
||
"IMG2IMG upscale": "图生图放大",
|
||
"img2img upscaler": "图生图的放大演算法",
|
||
"img2img-grids": "img2img-网格",
|
||
"img2img: height of image editor": "图生图: 图像编辑器高度",
|
||
"img2img_extra_sort_order": "图像转图像额外排序顺序",
|
||
"Implements an expressive template language for random or combinatorial prompt generation along with features to support deep wildcard directory structures.": "为随机或组合式提示词的生成实作了一种表达性模板语言，并支援深层目录结构中的万用字元",
|
||
"Import": "汇入",
|
||
"Import a model from Huggingface.co instead of using a local checkpoint.": "从 Huggingface.co 汇入模型而非使用本地的模型档案。",
|
||
"Import a model from Huggingface.co instead of using a local checkpoint. Hub model MUST contain diffusion weights. You can specify a local folder with a cloned model, no HF token will be needed in this case.": "从 Huggingface.co 汇入模型，而不是使用本地模型。Huggingface 的模型必须包含 diffusion 权重。可指定带有克隆模型的本地目录，这种情况下不需要 HF 令牌。",
|
||
"import completed!": "汇入完成！",
|
||
"import gradio": "汇入 Gradio",
|
||
"Import image": "汇入图像",
|
||
"import ldm": "汇入 Idm",
|
||
"Import Model from Huggingface Hub": "从 Huggingface Hub 载入模型",
|
||
"Import settings from file": "从档案汇入设定",
|
||
"import sgm": "汇入 sgm",
|
||
"import torch": "汇入 Torch",
|
||
"Important notes and Help": "重要资讯与帮助",
|
||
"Important notes:": "重要资讯:",
|
||
"Important Notes:": "重要事项：",
|
||
"Impressionist": "Impressionist (印象派)",
|
||
"Improve the generated image quality, searches for similar (yet even better!) images in the neighborhood of some known image, focuses on single prompt optimization rather than traveling between multiple prompts.": "提高产生的图像品质，在某个已知图像的附近搜寻类似（甚至更好！）的图像，专注於单个提示的优化，而不是在多个提示之间旅行。",
|
||
"In \"Interpolate existing pics\" mode, FPS is determined *only* by output FPS slider. Audio will be added if requested even with slow-mo \"enabled\", as it does *nothing* in this mode.": "在‘插入已有图像’模式中，帧率仅由帧率设定滑块决定。音讯将会加入，即使在慢动作模式启用情况下，且在此模式下什麼都不会做。",
|
||
"in <>, like <apple>, <hair>": "<>,比如 <apple>, <hair>",
|
||
"In FPS": "输入帧率",
|
||
"In Frame Count": "输入帧数",
|
||
"In Keyframes tab, you can also set": "在关键帧页籤, 可以设定",
|
||
"In loopback mode, on each loop the denoising strength is multiplied by this value. <1 means decreasing variety so your sequence will converge on a fixed picture. >1 means increasing variety so your sequence will become more and more chaotic.": "在回送模式下，在每个循环中，重绘幅度都会乘以该值。<1 表示减少多样性，因此你的这一组图将集中在固定的图像上。>1 意味着增加多样性，因此你的这一组图将变得越来越混乱",
|
||
"In queue...": "排队中……",
|
||
"In Res": "输入解析度",
|
||
"In the filename, '%09d' represents the 9 counting numbers, For '20230124234916_000000001.png', use '20230124234916_%09d.png'": "在档名中, '%09d' 代表9个计数数字, 对於 '20230124234916_000000001.png' , 使用 '20230124234916_%09d.png'",
|
||
"In the main tab, set the subject to humanoids": "在主选单页籤, 设定主题为 humanoids (人形)",
|
||
"In the prefix prompt field then add for example: Art by artistname, 2 people": "然後在前缀提示词段中新增範例: Art by artistname, 2 people",
|
||
"In this case, a random number of artists between 1 and 3 is chosen.": "此例中，会从中随机选 1 至 3 个艺术家",
|
||
"In this case, artist1 will be chosen twice as often as artist2.": "此例中，艺术家 1 将会比艺术家 2 高两倍的机会被选中",
|
||
"IN00": "输入层 00",
|
||
"IN01": "输入层 01",
|
||
"IN02": "输入层 02",
|
||
"IN03": "输入层 03",
|
||
"IN04": "输入层 04",
|
||
"IN05": "输入层 05",
|
||
"IN06": "输入层 06",
|
||
"IN07": "输入层 07",
|
||
"IN08": "输入层 08",
|
||
"IN09": "输入层 09",
|
||
"IN10": "输入层 10",
|
||
"IN11": "输入层 11",
|
||
"IN_A_00": "模型 A 输入层 00",
|
||
"IN_A_01": "模型 A 输入层 01",
|
||
"IN_A_02": "模型 A 输入层 02",
|
||
"IN_A_03": "模型 A 输入层 03",
|
||
"IN_A_04": "模型 A 输入层 04",
|
||
"IN_A_05": "模型 A 输入层 05",
|
||
"IN_A_06": "模型 A 输入层 06",
|
||
"IN_A_07": "模型 A 输入层 07",
|
||
"IN_A_08": "模型 A 输入层 08",
|
||
"IN_A_09": "模型 A 输入层 09",
|
||
"IN_A_10": "模型 A 输入层 10",
|
||
"IN_A_11": "模型 A 输入层 11",
|
||
"IN_B_00": "模型 B 输入层 00",
|
||
"IN_B_01": "模型 B 输入层 01",
|
||
"IN_B_02": "模型 B 输入层 02",
|
||
"IN_B_03": "模型 B 输入层 03",
|
||
"IN_B_04": "模型 B 输入层 04",
|
||
"IN_B_05": "模型 B 输入层 05",
|
||
"IN_B_06": "模型 B 输入层 06",
|
||
"IN_B_07": "模型 B 输入层 07",
|
||
"IN_B_08": "模型 B 输入层 08",
|
||
"IN_B_09": "模型 B 输入层 09",
|
||
"IN_B_10": "模型 B 输入层 10",
|
||
"IN_B_11": "模型 B 输入层 11",
|
||
"Inactive text color for image grids": "网格图未启用文本颜色",
|
||
"Include": "包含",
|
||
"Include artist tags in tag string": "在标籤字串中包含艺术家标籤",
|
||
"Include character tags in tag string": "在标籤字串中包含角色标籤",
|
||
"Include confident of tags matches in results": "在结果中包含标籤的匹组态信度",
|
||
"Include copyright tags in tag string": "在标籤字串中包含版权标籤",
|
||
"Include embeddings in normal tag results": "在普通标籤结果中包含嵌入式模型 (embeddings)",
|
||
"Include images in sub directories": "包含子目录的图像",
|
||
"Include meta tags in tag string": "在标籤字串中包含属性标籤",
|
||
"Include metadata in saved images": "在储存的图像中嵌入元数据",
|
||
"Include ranks of model tags matches in results.": "反推结果包含模型标籤符合等级",
|
||
"Include resource hashes in image metadata (for resource auto-detection on Civitai)": "在图像元数据中嵌入资源杂凑值 (用於在 Civitai 上自动检测资源)",
|
||
"Include Separate Images": "生成图表时，保留每一张图像",
|
||
"Include Sub Grids": "包括子网格",
|
||
"Include Sub Images": "包括子图像",
|
||
"Include sub images": "包含子图像",
|
||
"Include watermark in saved images": "在储存的图像中嵌入水印",
|
||
"Increase coherency by padding from the last comma within n tokens when using more than 75 tokens": "当使用超过 75 个词元(tokens)时，通过从 n 个词元中的最後一个逗号留空来提高一致性",
|
||
"Increment seed after each controlnet batch iteration": "在每次 controlnet 批處理迭代後增大种子",
|
||
"Incremental/decremental percentage (-50%, +50%)": "增减百分比（-50％，+50％）",
|
||
"Indent level": "缩排层级",
|
||
"Index": "索引",
|
||
"Infer styles from prompts of pasted infotext": "推断贴上的生成资讯文本的提示词中的预设样式",
|
||
"Infinite image browsing": "无限图像浏览",
|
||
"Infinite Zoom": "无限缩放",
|
||
"Infinity Grid Generator": "无限网格产生器",
|
||
"Info": "资讯",
|
||
"Info & Help": "资讯与帮助",
|
||
"Info and links": "资讯和网址",
|
||
"Info object": "全部资讯",
|
||
"Info, Links and Help": "资讯、连结与帮助",
|
||
"Information": "资讯",
|
||
"Information, comment and share @": "资讯，评论和分享：",
|
||
"Infotext": "文本资讯",
|
||
"Infotext is what this software calls the text that contains generation parameters and can be used to generate the same picture again.\nIt is displayed in UI below the image. To use infotext, paste it into the prompt and click the ↙️ paste button.": "文本资讯 (生成资讯) 是本项目称为包含生成参数的文本, 可用於再次生成相同的图像。\n它一般显示在 UI 中图像的下方。\n要使用此类别文本, 请贴上其到提示词输入框中，然後单击 ↙️ 按钮。",
|
||
"Init": "初始化",
|
||
"Init image": "初始化图像",
|
||
"Init image box": "初始化图像输入框",
|
||
"Init image URL": "初始化图像网址",
|
||
"Init tab's strength slider should be greater than 0. Recommended value (.65 - .80).": "初始化页籤的强度滑块应设定大於0，推荐设定为 (0.65 - 0.80) 。",
|
||
"Init Video": "初始化影片",
|
||
"initial": "初始化",
|
||
"Initial denoising strength": "初始降噪强度",
|
||
"Initial generated image number": "初始生成的图像编号",
|
||
"Initial seed": "初始种子",
|
||
"initial startup": "初始化启动",
|
||
"Initialization text": "初始化文字",
|
||
"Initialization text (negative)": "初始化文本（反向）",
|
||
"initialize extra networks": "初始化扩展模型",
|
||
"initialize shared": "初始化共享",
|
||
"Initiates extraction of video frames from your video_init_path to the inputframes folder. You only need to do this once and then you can change it to False and re-render": "从视频初始路径提取影片帧到输入帧目录。你只需要操作一次後关闭本选项，再重新渲染",
|
||
"Inner Fit (Scale to Fit)": "贴合内边 (放大以贴合)",
|
||
"InOutPaint": "向内向外绘製",
|
||
"inpaint": "修复",
|
||
"Inpaint": "区域重绘",
|
||
"Inpaint Anything": "全能重绘",
|
||
"Inpaint area": "修复区域",
|
||
"Inpaint Area(Override img2img Inpaint area)": "重绘区域（覆盖图生图的重绘区域）",
|
||
"Inpaint at full resolution": "全解析度区域重绘",
|
||
"Inpaint at full resolution 2nd": "全解析度区域重绘",
|
||
"Inpaint at full resolution 3rd": "全解析度区域重绘",
|
||
"Inpaint at full resolution 4th": "全解析度区域重绘",
|
||
"Inpaint at full resolution 5th": "全解析度区域重绘",
|
||
"Inpaint at full resolution padding, pixels": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 2nd": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 3rd": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 4th": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 5th": "预留像素",
|
||
"Inpaint batch mask directory (required for inpaint batch processing only)": "修补批次遮罩目录（仅适用於批次處理修补功能）",
|
||
"Inpaint denoising strength": "区域重绘幅度",
|
||
"Inpaint denoising strength 2nd": "区域重绘幅度",
|
||
"Inpaint denoising strength 3rd": "区域重绘幅度",
|
||
"Inpaint denoising strength 4th": "区域重绘幅度",
|
||
"Inpaint denoising strength 5th": "区域重绘幅度",
|
||
"Inpaint denoising strength 6th": "区域重绘幅度",
|
||
"Inpaint denoising strength 7th": "区域重绘幅度",
|
||
"Inpaint denoising strength 8th": "区域重绘幅度",
|
||
"Inpaint denoising strength 9th": "区域重绘幅度",
|
||
"Inpaint denoising strength 10th": "区域重绘幅度",
|
||
"inpaint height": "重绘高度",
|
||
"inpaint height 2nd": "重绘高度",
|
||
"inpaint height 3rd": "重绘高度",
|
||
"inpaint height 4th": "重绘高度",
|
||
"inpaint height 5th": "重绘高度",
|
||
"inpaint height 6th": "重绘高度",
|
||
"inpaint height 7th": "重绘高度",
|
||
"inpaint height 8th": "重绘高度",
|
||
"inpaint height 9th": "重绘高度",
|
||
"inpaint height 10th": "重绘高度",
|
||
"Inpaint mask blur": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask blur 2nd": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask blur 3rd": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask blur 4th": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask blur 5th": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask blur 6th": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask blur 7th": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask blur 8th": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask blur 9th": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask blur 10th": "重绘遮罩边缘模糊度",
|
||
"Inpaint mask brush color": "重绘遮罩画笔颜色",
|
||
"Inpaint masked": "重绘遮罩内容",
|
||
"Inpaint model B detections before model A runs": "在模型 A 执行之前，先区域重绘模型 B 的检测",
|
||
"Inpaint not masked": "重绘非遮罩内容",
|
||
"Inpaint only masked": "仅重绘遮罩内容",
|
||
"Inpaint only masked 2nd": "仅重绘遮罩内容",
|
||
"Inpaint only masked 3rd": "仅重绘遮罩内容",
|
||
"Inpaint only masked 4th": "仅重绘遮罩内容",
|
||
"Inpaint only masked 5th": "仅重绘遮罩内容",
|
||
"Inpaint only masked 7th": "仅重绘遮罩内容",
|
||
"Inpaint only masked 8th": "仅重绘遮罩内容",
|
||
"Inpaint only masked 9th": "仅重绘遮罩内容",
|
||
"Inpaint only masked 10th": "仅重绘遮罩内容",
|
||
"Inpaint only masked padding, pixels": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 2nd": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 3rd": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 4th": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 5th": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 6th": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 7th": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 8th": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 9th": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 10th": "仅重绘遮罩区域边缘预留像素",
|
||
"Inpaint selection": "重绘选择区域",
|
||
"inpaint sketch": "修复草图",
|
||
"Inpaint sketch": "修复素描",
|
||
"Inpaint sketch initial brush color": "塗鸦重绘初始画笔颜色",
|
||
"Inpaint upload": "修复上传",
|
||
"inpaint width": "重绘宽度",
|
||
"inpaint width 2nd": "重绘宽度",
|
||
"inpaint width 3rd": "重绘宽度",
|
||
"inpaint width 4th": "重绘宽度",
|
||
"inpaint width 5th": "重绘宽度",
|
||
"inpaint width 6th": "重绘宽度",
|
||
"inpaint width 7th": "重绘宽度",
|
||
"inpaint width 8th": "重绘宽度",
|
||
"inpaint width 9th": "重绘宽度",
|
||
"inpaint width 10th": "重绘宽度",
|
||
"Inpaint+ Height": "重绘+ 高度",
|
||
"Inpaint+ mode guide": "重绘+ 模式指南",
|
||
"Inpaint+ Width": "重绘+ 宽度",
|
||
"inpaint_global_harmonious": "inpaint_global_harmonious (重绘 - 全域融合演算法)",
|
||
"inpaint_only": "inpaint_only (仅区域重绘)",
|
||
"inpaint_only+lama": "inpaint_only+lama (仅区域重绘 + 大型遮罩)",
|
||
"inpainting": "重绘",
|
||
"Inpainting": "重绘",
|
||
"Inpainting conditioning mask strength": "区域重绘时图像调节的遮罩屏蔽强度",
|
||
"Inpainting Model ID": "重绘模型 ID",
|
||
"Inpainting Model ID webui": "webui 重绘模型 ID",
|
||
"Inpainting negative prompt use [gender] instead of men or woman": "使用 [性别] 作为反向提示词而不是简单的 ”man“ 或者 ”woman“",
|
||
"Inpainting Prompt": "重绘提示词",
|
||
"Inpainting prompt use [gender] instead of men or woman": "使用 [性别] 作为正向提示词而不是简单的 ”man“ 或者 ”woman“",
|
||
"Inpainting Sampler": "重绘採样方法",
|
||
"Inpainting seed": "重绘随机种子",
|
||
"Inpainting sends image to inpainting with a mask on face (once for each faces).": "重绘会将图像和脸部遮罩發送到可上传遮罩的区域重绘 (每个脸部一次)",
|
||
"Inpainting steps": "重绘步数",
|
||
"Inpainting webui": "webui 重绘",
|
||
"Input": "输入",
|
||
"Input <= Output": "输出图像 發送到 输入图像",
|
||
"Input audio": "输入音讯",
|
||
"Input directory": "输入目录",
|
||
"Input Directory": "输入目录",
|
||
"Input directory - See also settings tab.": "输入目录 - 也请检视设定选项",
|
||
"Input directory - To recurse use ** or */* in your glob; also check the settings tab.": "输入目录 - 在 glod 中用 ** 或 */* 来使用递迴；也请检视设定页籤",
|
||
"Input file path": "档案输入路径",
|
||
"Input Folder": "输入目录",
|
||
"Input image": "输入图像",
|
||
"Input Image": "输入图像",
|
||
"Input image here": "在此處输入图像",
|
||
"Input images directory": "输入图像目录",
|
||
"Input Mesh (.ply | .obj)": "输入网格档案 (.ply | .obj)",
|
||
"Input Negative Theme": "输入反向情境",
|
||
"Input path": "输入目录",
|
||
"Input Theme": "输入情境",
|
||
"Input Video": "输入影片",
|
||
"Insert [/Model Name] & [/Model Name/Version Name] as default sub folder options": "子目录路径预设插入 [/模型名称] 和 [/模型名称/版本名称]",
|
||
"Insert [\\Author Name] & [\\Model Name] & [\\Model Name\\Version Name] as sub folder options": "插入 [\\作者名称] & [\\模型名称] & [\\模型名称\\版本名称] 作为子目录选项",
|
||
"Insert [\\Model Name] & [\\Model Name\\Version Name] as sub folder options": "插入 [\\模型名称] & [\\模型名称\\版本名称] 作为子目录选项",
|
||
"Insert [Author Name] & [Model Name] & [Model NameVersion Name] as sub folder options": "插入 [\\作者名称] & [\\模型名称] & [\\模型名称\\版本名称] 作为子目录选项",
|
||
"Insert [Model Name] & [Model NameVersion Name] as sub folder options": "插入 [\\模型名称] & [\\模型名称\\版本名称] 作为子目录选项",
|
||
"Insert after": "後缀插入",
|
||
"Insert before": "前缀插入",
|
||
"Insert prompts at the": "将提示词插入到",
|
||
"Insert selected styles into prompt fields": "在提示词中插入选定的模版风格",
|
||
"Inserts matching keyword(s) to the prompt automatically. Update this extension to get the latest model+keyword mappings.": "自动将符合关键字插入提示。更新此延伸模组以获取最新的「模型+关键字」映射。",
|
||
"Inspect": "检查",
|
||
"Inspect any token(a word) or Textual-Inversion embeddings and find out which embeddings are similar. You can mix, modify, or create the embeddings in seconds.": "检查任何标记（一个单词）或文本反转嵌入并找出相似的嵌入。您可以在幾秒钟内混合，修改或创建嵌入。",
|
||
"Inspiration": "灵感",
|
||
"install": "安装",
|
||
"Install": "安装",
|
||
"Install from URL": "从网址安装",
|
||
"installed": "已安装",
|
||
"Installed": "已安装",
|
||
"Installing...": "正在安装...",
|
||
"Instance prompt": "提示词实例",
|
||
"Instance Prompt": "执行个体提示词",
|
||
"Instance prompt(Optional)": "提示词实例 (可选)",
|
||
"Instance Token": "执行个体名称",
|
||
"Instance Token + Class Token + Description": "实例的词元 + 类别的词元 + 描述",
|
||
"Instance Token + Description": "实例的词元(Token) + 描述",
|
||
"Instance token to swap": "要互换的实例的词元(Token)",
|
||
"Instant-ID": "Instant-ID (换脸)",
|
||
"Instead it will pick up all files in the \\upscale_me\\ folder and upscale them with below settings.": "相对应的会用 \\upscale_me\\ 目录中的档案按照下列设定对它们进行放大。",
|
||
"Instead it will pick up all files in the upscale_me folder and upscale them with below settings.": "相对应的会用 \\upscale_me\\ 目录中的档案按照下列设定对它们进行放大。",
|
||
"Instead of generating random prompts from a template, combinatorial generation produces every possible prompt from the given string.\nThe prompt 'I {love|hate} {New York|Chicago} in {June|July|August}' will produce 12 variants in total.\n\nThe value of the 'Seed' field is only used for the first image. To change this, look for 'Fixed seed' in the 'Advanced options' section.": "使用组合产生而非从範本产生随机提示，会从给定的字串中产生所有可能的提示。\n例如提示字串'I {love|hate} {New York|Chicago} in {June|July|August}'，会总共产生12种不同的提示。\n\n「Seed」栏位的值仅会用於生成第一张图像。若要更改此值，请寻找「Advanced options」区块中的「Fixed seed」选项。",
|
||
"instead of Python.": " 而不是 Python",
|
||
"instructs the handling of pixels outside the field of view as they come into the scene.": "选择进入场景的视场外像素的處理演算法",
|
||
"instructs the run to start from a specified point": "指示执行从指定点开始",
|
||
"integrations": "整合功能",
|
||
"interactive splines and Bezier curves": "互动式的曲缐和贝兹曲缐进行关键帧的製作。",
|
||
"Intermediate files path": "临时档案路径",
|
||
"Intermediate results may look better than the end results. /! Intermediate results are cleaned after each run, save them elsewhere if you want to keep them.": "中间的结果可能比最终结果看起来更好。提示: 中间的结果在每次执行後都会被清理，如果你想保留它们，就把它们储存在其他地方",
|
||
"Intermediate results may look better than the end results. /!\\ Intermediate results are cleaned after each run, save them elsewhere if you want to keep them.": "中间的结果可能比最终结果看起来更好。提示: 中间的结果在每次执行後都会被清理，如果你想保留它们，就把它们储存在其他地方",
|
||
"internal order": "内部顺序",
|
||
"Interp X": "插值次数 X",
|
||
"Interpolate existing Video/ Images": "插值已有的影片/图像",
|
||
"Interpolate Phi": "Phi插值",
|
||
"Interpolate upscaled images, if available": "插值放大图像 (如可用)",
|
||
"Interpolation": "插值",
|
||
"interpolation method": "插值模式",
|
||
"Interpolation method": "插值演算法",
|
||
"Interpolation Method": "插值方法",
|
||
"Interpolation rate": "插值速率",
|
||
"Interprocess communication strategy": "程序间通讯方式",
|
||
"Interrogate": "反推",
|
||
"Interrogate\nCLIP": "CLIP\n反推提示词",
|
||
"Interrogate\nDeepBooru": "DeepBooru\n反推提示词",
|
||
"Interrogate CLIP - use CLIP neural network to create a text describing the image, and put it into the prompt field": "CLIP 反推 - 使用 CLIP 神经网络建立图像的文本描述，并且将其填入提示词字段中",
|
||
"Interrogate Deepbooru": "Deepbooru 反推",
|
||
"Interrogate DeepBooru - use DeepBooru neural network to create a text describing the image, and put it into the prompt field": "DeepBooru - 使用 DeepBooru 神经网络建立图像的文本描述，并且将其填入提示词字段中",
|
||
"Interrogate image": "反推图像",
|
||
"Interrogate Options": "反推提示词选项",
|
||
"Interrogate Result": "反推结果",
|
||
"Interrogate Selected Image": "反推所选图像",
|
||
"Interrogate: deepbooru score threshold": "反推：deepbooru 分数阈值",
|
||
"Interrogate: deepbooru sort alphabetically": "反推：deepbooru 按字母顺序排序",
|
||
"Interrogate: include ranks of model tags matches in results (Has no effect on caption-based interrogators).": "反推：在生成结果中包含与模型标籤 (tags) 相符合的等级（对基於生成自然语言描述的反推没有影响）",
|
||
"Interrogate: keep models in VRAM": "反推：将模型保留在显存中",
|
||
"Interrogate: maximum description length": "反推：最大描述长度",
|
||
"Interrogate: minimum description length (excluding artists, etc..)": "反推：最小描述长度（不包括艺术家等）",
|
||
"Interrogate: num_beams for BLIP": "反推：BLIP 集束数量",
|
||
"Interrogate: use artists from artists.csv": "反推：使用 artists.csv 中的艺术家",
|
||
"Interrogates single or multiple image files using various alternative models, similar to deepdanbooru interrogate.": "使用各种替代模型检查单一或多个图像档，类似於 deepdanbooru 的检查。",
|
||
"Interrogator": "反推",
|
||
"Interrogator Settings": "反推器设定",
|
||
"Interrogators": "反推演算法",
|
||
"interrupt": "中止",
|
||
"Interrupt": "中止",
|
||
"Interrupting generation...": "正在中止生成...",
|
||
"Interrupting...": "正在中止...",
|
||
"Intervals": "训练週期 / 间隔",
|
||
"Inversion steps": "反转步数 (Steps)",
|
||
"Invert": "反相",
|
||
"Invert (black=near, white=far)": "反转（黑=近，白=远）",
|
||
"invert (from white bg & black line)": "invert (对白色背景黑色缐条图像反相處理)",
|
||
"Invert colors": "反转颜色",
|
||
"Invert colors if your image has white background.": "对於白色背景图像请开启颜色反转。",
|
||
"Invert DepthMap": "反转深度图",
|
||
"Invert DepthMap (black=near, white=far)": "反转深度图（黑色=近，白色=远）",
|
||
"Invert Input Color": "反转输入颜色",
|
||
"Invert mask": "反转遮罩",
|
||
"Invert selection": "反向选择",
|
||
"Invert sort order": "反转排序顺序",
|
||
"Inverts the composite mask.": "对合成遮罩进行反相處理",
|
||
"IP-Adapter": "IP-Adapter (图像提示适配器)",
|
||
"IP-Adapter Model ID": "IP-Adapter 模型 ID",
|
||
"ip-adapter-auto": "ip-adapter-auto (IP-Adapter 自动判断)",
|
||
"ip-adapter_clip_sd15": "ip-adapter_clip_sd15 (图像提示词自适应控制 - CLIP - SD1.5)",
|
||
"ip-adapter_clip_sdxl": "ip-adapter_clip_sdxl (图像提示词自适应控制 - CLIP - SDXL)",
|
||
"ip-adapter_clip_sdxl_plus_vith": "ip-adapter_clip_sdxl_plus_vith(图像自适应提示词 - CLIP - SDXL - vit-h 增强模型)",
|
||
"ip-adapter_face_id_plus": "ip-adapter_face_id_plus (InsightFace+CLIP-H IP-Adapter)",
|
||
"is a neural network that transforms a standard": " 是一种神经网络，可将标准的 ",
|
||
"is also a good option, it makes compact math formulae for Deforum keyframes by selecting various waveforms.": "是一个不错的选择，它透过选择不同的波形为 Deforum 关键帧生成简洁的数学公式。",
|
||
"is equivalent to": "等同於",
|
||
"is experimental functions and NO PROOF of effectiveness.": " 为实验性功能，不保证有效性。",
|
||
"Is negative text": "是反向提示词",
|
||
"is SDXL": "是 SDXL 模型？",
|
||
"is set,": "已经设定数值，",
|
||
"is the": " 是 ",
|
||
"is the current frame number.": " 是当前帧数序号",
|
||
"is the length of the video, in frames.": " 是影片的整体长度，用帧数来统计",
|
||
"Isometric Style": "Isometric Style (等距风格)",
|
||
"Issue Tracker": "问题追踪",
|
||
"It is a depth aware extension that can help to create multiple complex subjects on a single image. It generates a background, then multiple foreground subjects, cuts their backgrounds after a depth analysis, paste them onto the background and finally does an img2img for a clean finish.": "它是一个深度感知延伸，可以帮助在单张图像上创建多个複杂主题。它先产生背景，再产生多个前景主题，根据深度分析切割它们的背景，将它们贴上到背景上，最後进行图生图，得到一个乾净的结果。",
|
||
"It is automatically set to No when adding, and it needs to be changed again": "新增後自动设定为 No，若有需要请手动调整",
|
||
"It takes time, just wait. Check console log for detail": "检查需要一段时间，请耐心等待。检查控制台日誌以检视详情。",
|
||
"It takes time, just wait. Check console log for details": "需要时间，请耐心等待。检查控制台日誌以检视细节",
|
||
"It will delete any matches to the generated result (case insensitive).": "它将删除生成结果中的的任何符合项（不区分大小写）",
|
||
"It will then recognize the body type and not generate it. It also recognizes the keyword wearing, and will not generate an outfit.": "然後，它将辨识体型来避免生成对应体型。它同样能辨识关键词 \"穿着\"，避免生成服装。",
|
||
"It will translate prompt from your native language into English. So, you can write prompt with your native language.": "这会将您输入的提示词翻译为英文。因此，您可以直接用母语输入提示词。",
|
||
"it_IT Localization": "义大利语本地化语言包",
|
||
"Italian localization": "义大利语本地化",
|
||
"iter": "迭代",
|
||
"Iterate seed every line": "每行输入都换一个随机种子",
|
||
"Iterations": "迭代次数",
|
||
"ja_JP Localization": "日文本地化语言包",
|
||
"Japanese localization": "日语本地化",
|
||
"JavaScript aspect ratio buttons (1:1, 4:3, 16:9, 9:16, 21:9)": "前端纵横比按钮 (填入类似於 1:1, 4:3, 16:9, 9:16, 21:9 的纵横比)",
|
||
"Javascript logs": "Javascript 日誌",
|
||
"JavaScript selection method": "前端选择样式",
|
||
"Jinja2 documentation.": "Jinja2 档案资料。",
|
||
"Jinja2 templates": "Jinja2 模板",
|
||
"Jinja2 templates are an expressive alternative to the standard syntax. See the Help section below for instructions.": "Jinja2 模板是标准语法富有表现力的一种替代品，相关说明参见下方帮助栏",
|
||
"Jinja2 templates are based on the Jinja2 template engine. For more information see the": "Jinja2 模板基於 Jinja2 模板引擎，更多讯息参考",
|
||
"Jinja2 templates is an experimental feature for advanced template generation. It is not recommended for general use unless you are comfortable with writing scripts.": "Jinja2 範本是一个用於进阶範本产生的实验性特性。如果不熟悉编写指令码，正常使用时不建议启用",
|
||
"Jitter step:": "抖动步数: ",
|
||
"Jitter the seeds of sub-generations when doing a rolling generation (Still deterministic)": "在进行梯度放大倍数生成时, 对子代生成的随机种子进行抖动 (图像依旧可复现)",
|
||
"Join the": "加入我们",
|
||
"Join the official Deforum Discord discord.gg/deforum to share your creations and suggestions": "加入官方 Deforum 的 Discord discord.gg/deforum 分享您的创作和建议",
|
||
"json input path (Optional, only for append results)": "json 输入路径（可选，只用於追加结果）",
|
||
"json path": "json 路径",
|
||
"JSON Validator": "JSON 校验器中检查",
|
||
"Judge": "鑑定",
|
||
"Just resize": "拉伸",
|
||
"Just Resize": "拉伸",
|
||
"Just resize (latent upscale)": "仅重新调整大小（潜在变数放大）",
|
||
"k value": "k 值",
|
||
"KaimingNormal": "Kaiming 正态",
|
||
"KaimingUniform": "Kaiming 均匀",
|
||
"Kana Name": "网名",
|
||
"Keep": "保留",
|
||
"Keep -1 for seeds": "保持随机种子为 -1",
|
||
"Keep 3D models in VRAM between runs": "执行时，将3D模型保留在显存中",
|
||
"Keep at 1 for normal behavior.\nSet to different values to compound that many prompts together. My suggestion is to try 2 first.": "设定为 1 保持正常行为。\n设定其他数值来混合更多提示词。我的建议是先尝试设定为 2 。",
|
||
"Keep blank if you don't have mask": "如果没有遮罩, 请保持空白",
|
||
"Keep empty if dont use.": "不使用请留空",
|
||
"Keep Imgs": "保留原图",
|
||
"Keep input image size": "维持输入图像尺寸",
|
||
"Keep interpolated images on disk": "保留插值图像在硬盘",
|
||
"Keep models in VRAM": "将模型保留在显存中",
|
||
"Keep occlusion edges": "保持边缘封闭",
|
||
"Keep original feet 🡢 keep_feet": "保留原图脚部 🡢 keep_feet",
|
||
"Keep original hands 🡢 keep_hands": "保留原图手部 🡢 keep_hands",
|
||
"keep original image before swapping": "变换前储存原始图像",
|
||
"Keep original image channels": "保持原始图像通道",
|
||
"Keep original size": "保持原始尺寸",
|
||
"Keep resolution": "保持解析度",
|
||
"Keep settings persistent upon relaunch of webui": "重启 webui 时保持持久性设定",
|
||
"Keep tag, ..": "保留标籤, ..",
|
||
"Keep temp images": "保留临时图像",
|
||
"Keep the normalization layers of CLIP frozen during training. Advanced usage, may increase model performance and editability.": "训练过程中冻结 CLIP 的归一化层。可提高模型性能和可编辑性的进阶用法。",
|
||
"Keep the Ratio": "保持图像比例",
|
||
"keep whatever was there originally": "保留原来的图像，不进行预處理",
|
||
"Kept tag, ..": "保留标籤, ..",
|
||
"Kernel schedule": "Kernel 调度计劃",
|
||
"kernel size": "画笔大小",
|
||
"key for Fullscreen mode,": " 键进入全萤幕模式, ",
|
||
"key to Reset zoom": " 键重设缩放",
|
||
"key_max_gap: ": "最大关键帧间隔：",
|
||
"key_min_gap: ": "最小关键帧间隔：",
|
||
"key_th: ": "增量帧边缘阈值：",
|
||
"Keyframes": "关键格",
|
||
"Keyframes are output to ": "关键帧已输出到 ",
|
||
"Keyframes: animation settings (animation mode, max frames, border)": "关键帧：动画设定（动画模式，最大帧数，边界）",
|
||
"Keyframes: coherence (color coherence & cadence)": "关键帧：一致性（颜色一致性和间隔）",
|
||
"Keyframes: depth warping": "关键帧：深度变形",
|
||
"Keyframes: generation settings (noise, strength, contrast, scale).": "关键帧：通用设定（噪点，强度，对比度，缩放）",
|
||
"Keyframes: motion parameters for 2D and 3D (angle, zoom, translation, rotation, perspective flip).": "关键帧：2D 和 3D 的运动参数（角度，缩放，变换，旋转，透视翻转）",
|
||
"keys : ": "关键帧：",
|
||
"keyword": "搜寻",
|
||
"Keywords": "触發提示词",
|
||
"Kirigami": "Kirigami (日本剪纸)",
|
||
"Kitchen Theme": "Kitchen 主题",
|
||
"kmeans": "聚类别 (kmeans)",
|
||
"kmeans with dithering": "聚类别 (kmeans) 且 抖动 (dithering)",
|
||
"ko_KR Localization": "韩文在地化语言包",
|
||
"Kohya HRFix Integrated": "Kohya HRFix Integrated 高解析度图像缩放修正",
|
||
"Kohya module:": "Kohya 模组类型:",
|
||
"Kohya-ss Additional Networks": "Kohya-ss 附加网路",
|
||
"Korean localization": "韩语本地化",
|
||
"Krita Plugin.": "Krita 套件",
|
||
"LAB is a more linear approach to mimic human perception of color space - a good default setting for most users.": "LAB 是一种更为缐性的方法，可以模拟人类对色彩空间的感知——这是大多数使用者的一个很好的预设设定。",
|
||
"Label": "标记",
|
||
"ladder": "阶梯式",
|
||
"landscape - A landscape or a landscape with a building.": "landscape - 景观 - 一般景观或有建筑的景观。",
|
||
"Last Image": "上一张图像",
|
||
"Last message": "最後输出资讯",
|
||
"Last Name": "姓",
|
||
"Latent": "潜在变数",
|
||
"Latent (antialiased)": "潜在变数（抗锯齿）",
|
||
"Latent (bicubic antialiased)": "潜在变数（双立方抗锯齿）",
|
||
"Latent (bicubic)": "潜在变数（双立方）",
|
||
"Latent (nearest)": "潜在变数（最接近）",
|
||
"Latent (nearest-exact)": "潜在变数（最接近精确）",
|
||
"Latent Couple": "潜在变数伴侣",
|
||
"Latent Mirror mode": "镜像潜在变数模式",
|
||
"Latent Mirror style": "潜在变数镜像样式",
|
||
"Latent Mirroring": "镜像潜在变数",
|
||
"latent noise": "潜在变数噪点",
|
||
"latent nothing": "潜在变数数值零",
|
||
"Latent tile batch size": "潜在变数分块批次数量",
|
||
"Latent tile height": "潜在变数分块高度",
|
||
"Latent tile overlap": "潜在变数分块重叠",
|
||
"Latent tile width": "潜在变数分块宽度",
|
||
"Latent Upscale": "Latent Upscale (潜空间放大)",
|
||
"LatentModifier Integrated": "LatentModifier Integrated 潜空间修改器",
|
||
"latest": "最新",
|
||
"Latitude": "纬度",
|
||
"latte": "latte/拿铁（浅色）",
|
||
"launcher": "启动器",
|
||
"Layer Divider": "图层分割工具",
|
||
"Layer1": "图层 1",
|
||
"Layer1 mask blur": "图层 1 遮罩模糊",
|
||
"Layer1 mask strength": "图层 1 遮罩强度",
|
||
"Layer1 opacity": "图层 1 透明度",
|
||
"Layer2": "图层 2",
|
||
"Layer2 mask blur": "图层 2 遮罩模糊",
|
||
"Layer2 mask strength": "图层 2 遮罩强度",
|
||
"Layer2 opacity": "图层 2 透明度",
|
||
"Layer3": "图层 3",
|
||
"Layer3 mask blur": "图层 3 遮罩模糊",
|
||
"Layer3 mask strength": "图层 3 遮罩强度",
|
||
"Layer3 opacity": "图层 3 透明度",
|
||
"Layer4": "图层 4",
|
||
"Layer4 mask blur": "图层 4 遮罩模糊",
|
||
"Layer4 mask strength": "图层 4 遮罩强度",
|
||
"Layer4 opacity": "图层 4 透明度",
|
||
"Layer5": "图层 5",
|
||
"Layer5 mask blur": "图层 5 遮罩模糊",
|
||
"Layer5 mask strength": "图层 5 遮罩强度",
|
||
"Layer5 opacity": "图层 5 透明度",
|
||
"Layers": "图层",
|
||
"Lazy": "保守",
|
||
"LDSR processing steps. Lower = faster": "LDSR 處理叠代步数。越少越快",
|
||
"Learn More ➜": "了解详情 ➜",
|
||
"Learning rate": "学习率",
|
||
"Learning Rate": "学习率",
|
||
"Learning Rate Scheduler": "学习率调度器",
|
||
"Learning Rate Warmup Steps": "学习率预热步数",
|
||
"Leave blank to save images to the default path.": "留空以将图像储存到预设路径",
|
||
"Leave blank to save images to the same path.": "留空以将图像储存到相同路径",
|
||
"Leave blank to use base model VAE.": "留空以使用基本模型 VAE。",
|
||
"Leave blank to use instance prompt.": "留空以使用实例提示词",
|
||
"Leave blank to use instance prompt. Optionally use [filewords] to base sample captions on instance images.": "留空以使用执行个体提示。可以选择使用 [filewords] 以执行个体图像为基础生成样本标题。",
|
||
"Leave blank to use same filename as original.": "留空时将使用与原文件相同的档名",
|
||
"Leave empty for auto": "留空时自动生成",
|
||
"Leave empty for default main branch": "留空以使用预设分支",
|
||
"Leave empty for using generation negative prompt": "留空以使用图像生成反向提示词",
|
||
"Leave empty for using generation prompt": "留空以使用图像生成提示词",
|
||
"Leave empty to use img2img batch controlnet input directory": "留空使用img2img批處理controlnet输入目录",
|
||
"Leave empty to use input directory": "留空以使用输入目录",
|
||
"Leave empty to use the --listen address of the ComfyUI server": "留空以使用 ComfyUI 伺服器的 --listen 监听地址",
|
||
"Leave empty to use the same name as model and put results into models/Unet-onnx directory": "留空以使用与 checkpoint 模型相同的名称, 并将转换出的模型放入 models/Unet-onnx 目录",
|
||
"Leave empty to use the same name as onnx and put results into models/Unet-trt directory": "留空以使用与 onnx 模型相同的名称, 并将转换出的模型放入 models/Unet-trt 目录",
|
||
"Leave the prompt field empty": "提示词段留空",
|
||
"Leave this alone unless you know what you are doing": "不明白这个选项的意思的话最好不要动",
|
||
"left": "左",
|
||
"Left click the image to add one positive point (black dot). Right click the image to add one negative point (red dot). Left click the point to remove it.": "左键点击图像新增一个黑色的正向标记点（想提取的部分）。右键点击图像新增一个红色的反向标记点（不想提取的部分）。左键再次点击可以删除标记点。",
|
||
"left-right": "左 - 右",
|
||
"Left/Right Balance": "左/右平衡",
|
||
"Leg Length": "腿部长度",
|
||
"Legacy colormatch": "经典颜色符合",
|
||
"Legacy hash": "旧杂凑值",
|
||
"Legend of Zelda": "Legend of Zelda (塞尔达传说)",
|
||
"Len": "长度",
|
||
"Length": "长度",
|
||
"Lens distortion (Fisheye)": "镜头失真 (鱼眼)",
|
||
"LeReS Resolution": "LeReS 解析度（LeReS Resolution）",
|
||
"Lerp": "缐性插值",
|
||
"Let the Dice roll": "随机融合",
|
||
"Lets you edit captions in training datasets.": "让你可以在这裡编辑训练数据集的描述文本",
|
||
"lets you only match every N frames": " 可以仅在每渲染 N 帧校正一次颜色",
|
||
"libraries": "库",
|
||
"License": "许可协议",
|
||
"License: MIT": "许可: MIT",
|
||
"Licenses": "授权",
|
||
"LightDiffusionFlow File": "LightDiffusionFlow 档案",
|
||
"lighten": "变亮",
|
||
"like here": "网址",
|
||
"Liked images": "喜欢的图像",
|
||
"Limb Width": "四肢宽度",
|
||
"Limit Jinja prompts: Limit the number of prompts to batch_count * batch_size. The default is to generate batch_count * barch_size * number of prompts generated by Jinja": "将提示的数量限制为 batch_count * batch_size。预设是产生 batch_count * batch_size * Jinja 产生的提示数量。",
|
||
"Limit Jinja prompts: Limit the number of prompts to batch_count * batch_size. The default is to generate batch_count * batch_size * number of prompts generated by Jinja": "限制 Jinja 提示词数量：限制提示词数量为 总批次数 * 单批数量 (batch count * batch size)。预设情况下，生成数量为 = 总批次数 * 单批数量 * Jinja 生成的提示词数量",
|
||
"Limit the height of preivews to the height of the browser window (.html preview files are always limited regardless of this setting)": "将预览的高度限制为浏览器视窗高度（.html 预览档始终受此设定的限制）",
|
||
"Limit the maximum number of prompts generated. 0 (default) will generate all images. Useful to prevent an unexpected combinatorial explosion.": "限制产生的提示词数量的上限，预设为0，表示产生所有图像。这个选项可以防止过多的组合。",
|
||
"Line Art": "Line Art (缐条艺术)",
|
||
"line drawing": "line drawing (缐描)",
|
||
"Line Feed": "Line Feed (换行符)",
|
||
"Linear": "缐性（Linear）",
|
||
"linear": "缐性（linear）",
|
||
"linear_burn": "缐性加深",
|
||
"linear_dodge": "缐性加亮",
|
||
"linear_light": "缐性光缐",
|
||
"Lineart": "Lineart (缐稿)",
|
||
"lineart_anime": "lineart_anime (动漫缐稿提取)",
|
||
"lineart_anime_denoise": "lineart_anime_denoise (动漫缐稿提取 - 降噪)",
|
||
"lineart_coarse": "lineart_coarse (粗略缐稿提取)",
|
||
"lineart_realistic": "lineart_realistic (写实缐稿提取)",
|
||
"lineart_standard": "lineart_standard (标准缐稿提取 - 白底黑缐)",
|
||
"lineart_standard (form white bg & black line)": "lineart_standard (标准缐稿提取 - 白底黑缐)",
|
||
"lineart_standard (from white bg & black line)": "lineart_standard (标准缐稿提取 - 白底黑缐反色)",
|
||
"Link to DeepL": "Deepl 在缐翻译网址",
|
||
"Link to image page": "网址到图像页面",
|
||
"Link to online results": "网址到在缐结果",
|
||
"lips_v1.pt": "lips_v1.pt (2D / 写实 嘴唇)",
|
||
"list extensions": "列出扩展",
|
||
"List loaded embeddings": "获取嵌入式模型列表",
|
||
"list localizations": "列出本地化",
|
||
"List of active tabs (separated by commas). Available options are txt2img, img2img, txt2img-grids, img2img-grids, Extras, Favorites, Others, All, Maintenance. Custom folders are also supported by specifying their path.": "启用的图像储存目录标籤 (用逗号分隔). 可用的标籤有, 文生图(txt2img),图生图(img2img), 文生图-网格(txt2img-grids), 图生图-网格(img2img-grids), 後期處理(Extras), 收藏夹(Favorites), 其他(Others), 全部(All), 维护(Maintenance)。 也可以通过指定档案目录来自定义目录标籤.",
|
||
"List of active tabs (separated by commas). Available options are txt2img, img2img, txt2img-grids, img2img-grids, Extras, Favorites, Others. Custom folders are also supported by specifying their path.": "启用的图像储存目录标籤 (用逗号分隔). 可用的标籤有, 文生图(txt2img),图生图(img2img), 文生图-网格(txt2img-grids), 图生图-网格(img2img-grids), 後期處理(Extras), 收藏夹(Favorites), 其他(Others). 也可以通过指定档案目录来自定义目录标籤.",
|
||
"List of model names (with file extension) or their hashes to use as black/whitelist, separated by commas.": "要用作黑名单/白名单的模型名称清单（包括档案副档名）或其杂凑值，用逗号分隔。",
|
||
"List of prompt inputs": "提示词输入列表",
|
||
"List of setting names, separated by commas, for settings that should go to the quick access bar at the top, rather than the usual setting tab. See modules/shared.py for setting names. Requires restarting to apply.": "设定项名称列表，以逗号（,）分隔，该设定会移动到顶部的快速存取列，而不是预设的设定页籤。有关设定名称，请参见 modules/shared.py。需要储存设定并重新启动才能套用",
|
||
"list SD models": "列出 SD 模型",
|
||
"List-Up checkpoints": "列出模型",
|
||
"Literals": "字面值",
|
||
"Live preview display period": "实时预览显示周期",
|
||
"Live preview file format": "实时预览档案格式",
|
||
"Live preview method": "实时预览模式",
|
||
"Live preview subject": "实时预览主题",
|
||
"Live previews": "即时预览",
|
||
"Live Previews": "实时预览",
|
||
"LLuL": "潜空间区域放大",
|
||
"LMS": "LMS（不）",
|
||
"LMS Karras": "LMS Karras（不）",
|
||
"Lo RA Prompt Helper": "LoRA 提示词助手",
|
||
"Load": "载入",
|
||
"load": "载入",
|
||
"Load & Save": "载入 & 储存",
|
||
"Load all installed models": "载入所有已安装的模型",
|
||
"Load All Settings": "载入所有设定",
|
||
"Load an image.": "载入一张图像",
|
||
"Load BG": "载入背景图",
|
||
"Load caption from filename if no text file exists": "当文本档案不存在时，从档名中载入描述",
|
||
"Load CLIP preprocessor model on CPU": "在 CPU 上载入 CLIP 预處理器模型",
|
||
"Load ComfyUI iframes through a reverse proxy (requires reload UI. Needs --api. Default is on if webui is remote)": "通过反向代理载入 ComfyUI 嵌入页面 (需要重载前端; 需要 --api; 对於可远端访问的 webui 预设启用)",
|
||
"Load data from file": "从档案载入数据",
|
||
"Load from JSON": "从 JSON 载入",
|
||
"Load from subdirectories": "从子目录中载入",
|
||
"Load from:": "载入自",
|
||
"Load model": "载入模型",
|
||
"Load model paramters from the last training session.": "从上次训练中载入模型参数",
|
||
"Load models using stream loading method": "使用流式模型载入方法",
|
||
"Load models/files in hidden directories": "载入隐藏目录中的模型/档案",
|
||
"Load Only": "仅载入",
|
||
"Load Params": "载入参数",
|
||
"Load preset": "载入预设",
|
||
"Load Preset": "载入预设",
|
||
"Load results": "载入结果",
|
||
"Load Romdom preset": "随机载入预设",
|
||
"Load Scene": "载入场景",
|
||
"load scripts": "载入脚本",
|
||
"Load SD checkpoint to VRAM from RAM": "从记忆体中载入 SD 模型到显存中",
|
||
"Load Settings": "载入设定",
|
||
"Load settings from:": "组态载入自: ",
|
||
"Load trigger words from Dreambooth model": "从 Dreambooth 模型中载入触發词",
|
||
"load upscalers": "载入放大演算法",
|
||
"Load Video Settings": "载入影片设定",
|
||
"Load your 3D model/animation inside webui, or edit model pose as well, then send screenshot to txt2img or img2img to ControlNet.": "载入你的 3D 模型 / 动画到网页使用者介面，或编辑模型姿势，然後传送截图至文生图或图生图的 ControlNet。",
|
||
"load_history": "载入历史记录",
|
||
"load_switch": "载入开关",
|
||
"Loaded checkpoint is a SDXL checkpoint": "已载入大模型是 SDXL 模型?",
|
||
"Loaded Model:": "载入模型：",
|
||
"Loading...": "载入中...",
|
||
"Loads weights from checkpoint before making images. You can either use hash or a part of filename (as seen in settings) for checkpoint name. Recommended to use with Y axis for less switching.": "在生成图像之前从模型权重存档点中载入权重。你可以使用杂凑值或档案名的一部分（如设定中所示）作为模型权重存档点名称。建议用在Y轴上以减少过程中模型的切换",
|
||
"Local": "本地",
|
||
"Local directory name": "本地目录名称",
|
||
"Local Latent Upscaler. Target an area to selectively enhance details.": "潜在变数区域放大。指定一个範围以选择性增强细节。",
|
||
"localization": "本地化",
|
||
"Localization": "本地化",
|
||
"Localization (requires restart)": "本地化翻译（需要重启）",
|
||
"Localization dirs": "本地化路径",
|
||
"Localization file (Please leave `User interface` - `Localization` as None)": "本地化翻译（请将使用者介面下的本地化翻译设为无）",
|
||
"Localization: refresh": "本地化: 刷新",
|
||
"Location": "FFmpeg 所在位置",
|
||
"Lock current settings": "锁定当前设定",
|
||
"Log": "日誌",
|
||
"Log directory": "日誌目录",
|
||
"Logo": "图标",
|
||
"Long Exposure": "Long Exposure (长曝光)",
|
||
"Longitude": "经度",
|
||
"Loop": "循环",
|
||
"Loop back to initial seed": "再变迁回初始种子",
|
||
"Loopback": "回送",
|
||
"LoopBack mode": "回送模式",
|
||
"Loopback option": "回送选项",
|
||
"Loopback source": "回送源",
|
||
"Looping recommendations:": "循环设定建议：",
|
||
"Loops": "叠代次数",
|
||
"Loops:": "循环次数：",
|
||
"Loose": "宽鬆",
|
||
"Lora": "LoRA",
|
||
"LoRA Block Weight": "LoRA 区块权重",
|
||
"LoRA directory (if not default)": "LoRA 模型目录 (如非预设)",
|
||
"LoRA in negative textencoder": "反向提示词中 LoRA 文本编码器权重",
|
||
"LoRA in negative U-net": "反向提示词中 LoRA 的 U-net 权重",
|
||
"LoRA Model": "LoRA 模型",
|
||
"Lora Model": "LoRA 模型",
|
||
"LoRA model name filter": "LoRA 模型名称过滤器",
|
||
"Lora multiplier": "Lora 强度倍率",
|
||
"Lora not found warning in console": "未找到 Lora 时在控制台显示警告",
|
||
"Lora not found warning popup in webui": "未找到 Lora 时在 webui 弹出警告视窗",
|
||
"LoRA prompt helper": "LoRA 提示词助手",
|
||
"Lora Text Encoder Learning Rate": "LoRA Text Encoder 学习率",
|
||
"Lora Text Encoder Rank": "LoRA 文字编码器等级",
|
||
"Lora Text Weight": "LoRA 文本权重",
|
||
"Lora UNET Learning Rate": "LoRA UNET 学习率",
|
||
"Lora UNET Rank": "LoRA UNET等级",
|
||
"LoRA use buggy requires grad": "LoRA 启用错误梯度需求",
|
||
"Lora Weight": "LoRA 权重",
|
||
"Lora/Networks: use old method that takes longer when you have multiple Loras active and produces same results as kohya-ss/sd-webui-additional-networks extension": "对於 Lora 等模型: 使用旧的载入方法，当多个 Lora 启用时需要更长的时间，并且可以生成与 kohya-ss/sd-webui-additional-networks 扩展相同的结果",
|
||
"Lora: use old method that takes longer when you have multiple Loras active and produces same results as kohya-ss/sd-webui-additional-networks extension": "Lora: 使用旧的载入方法，当多个 Lora 启用时需要更长的时间，并且可以生成与 kohya-ss/sd-webui-additional-networks 扩展相同的结果",
|
||
"Loss for cond match (grad mode)": "符合文字调节(cond)损失 (梯度模式)",
|
||
"Loss for latent match (grad mode)": "符合潜空间(latent)损失 (梯度模式)",
|
||
"low contrast": "low contrast (低对比度)",
|
||
"Low fps": "低帧率",
|
||
"Low res only": "仅低解析度",
|
||
"Low VRAM": "低 VRAM 模式",
|
||
"Low VRAM (8GB or below)": "低显存 (8 GB 以下) 模式",
|
||
"Lower Leg": "小腿长度",
|
||
"Lower limit for X": "X 值下限",
|
||
"Lowpoly": "Low Poly (低多边形)",
|
||
"LyCORIS directory (if not default)": "LyCORIS 模型目录 (如非预设)",
|
||
"M00": "中间层",
|
||
"M_A_00": "模型 A 中间层",
|
||
"M_B_00": "模型 B 中间层",
|
||
"macchiato": "macchiato/玛奇朵（深色）",
|
||
"Made by": "製作者：",
|
||
"Made by deforum.github.io, port for AUTOMATIC1111's webui maintained by kabachuha": "由 deforum.github.io 製作，AUTOMATIC1111 的 webui 移植版本由 kabachuha 维护",
|
||
"Magenta | Green": "洋红色 | 绿色",
|
||
"Magic prompt": "魔法提示词",
|
||
"Magic Prompt adds interesting modifiers to your prompt for a little bit of extra spice.\nThe first time you use it, the MagicPrompt model is downloaded so be patient.\nIf you're running low on VRAM, you might get a CUDA error.": "魔法提示词在提示词中加入有趣的修饰，额外增添趣味。\n首次使用时会下载 MagicPrompt 模型，请耐心等待。\n在低 VRAM 情况下可能会导致 CUDA 报错。",
|
||
"Magic Prompt batch size": "魔法提示词批次大小",
|
||
"Magic Prompt batch size (higher is faster but uses more memory)": "魔法提示词单批数量 (更高的数值会更快但会使用更多记忆体)",
|
||
"Magic prompt blocklist regex": "魔法提示词黑名单。",
|
||
"Magic prompt creativity": "魔法提示词创意",
|
||
"Magic prompt model": "魔法提示词模型",
|
||
"Main": "主选单",
|
||
"Main menu position": "主选单位置",
|
||
"Main Settings": "主设定",
|
||
"Main Splitting": "主分割方法",
|
||
"mainly allows using more than 200 steps. otherwise, it's a mirror-like param of 'strength schedule'": "主要用於允许使用大於 200 的迭代步数。不然的话其实只是近似於强度调度计劃的一个参数",
|
||
"mainly allows using more than 200 steps. Otherwise, it's a mirror-like param of 'strength schedule'": "主要为了允许使用超过 200 的迭代步数。否则的话本选项其实约等於另一个叫 ‘强度调度计劃’ 的参数选项",
|
||
"Maintenance": "维护",
|
||
"Maji Merger": "Maji 融合",
|
||
"Make a backup copy of the model being edited when saving its metadata.": "储存中继资料时，备份正在编辑的模型",
|
||
"Make an attempt to produce a picture similar to what would have been produced with same seed at specified resolution": "在相同随机种子但不同解析度的情况下，尝试生成与指定解析度的生成结果相似的图像",
|
||
"Make GIF": "製作 GIF",
|
||
"make gif in addition to the video/s": "除影片外额外製作 GIF",
|
||
"make GIF in addition to the video/s": "除影片外额外製作 GIF",
|
||
"Make Hires. fix+ run before any other extensions (will reload WebUI)": "使 高解析度修复PLUS 在其他所有延伸模组前执行 (勾选後会立刻重载WebUI)",
|
||
"Make Images": "製作图像",
|
||
"Make K-diffusion samplers produce same images in a batch as when making a single image": "使 K-diffusion 取样器批量生成与生成单个图像时，产出相同的图像",
|
||
"Make LoRA (A-B)": "製作差分 LoRA (A-B)",
|
||
"Make LoRA (alpha * A - beta * B)": "製作差分 LoRA (α × A - β × B)",
|
||
"Make your changes, press 'View changes' to review the changed default values,": "修改後通过点击 '检视更改' 来复查修改後的预设设定数值。\n然後点击 \"套用\" 把更改後的数值写入到 webui 根目录中的 ui-config.json档案中。",
|
||
"Make your choices, adjust your settings, set a name, save. To edit a prior choice, select from dropdown and overwrite.": "做出选择，调整设定，设定名称，储存。要编辑先前的选择，请从下拉列表中选择并覆盖。",
|
||
"Make Zip when Save?": "储存时建立 zip 压缩档案?",
|
||
"MALE": "男性",
|
||
"Manage Extensions": "管理扩展",
|
||
"Manage wildcards for Dynamic Prompts": "管理动态提示词扩充功能的万用字元",
|
||
"manifest for your animation (leave blank to ignore).": " 对应你动画的清单 (留空以忽略)",
|
||
"manipulations": "操作",
|
||
"Manual Class Generation": "手动生成类别",
|
||
"Manual install": "手动安装",
|
||
"mask": "遮罩",
|
||
"Mask": "遮罩",
|
||
"Mask area Only": "仅重绘遮罩区域",
|
||
"Mask blur": "遮罩模糊",
|
||
"Mask Blur": "遮罩边缘模糊度",
|
||
"Mask Blur Kernel Size": "遮罩模糊内核大小",
|
||
"Mask Blur Kernel Size(GaussianBlur)": "遮罩模糊内核大小（高斯模糊）",
|
||
"Mask Blur Kernel Size(MedianBlur)": "遮罩模糊内核大小（中值模糊）",
|
||
"Mask brightness adjust": "遮罩亮度调整",
|
||
"Mask by Category": "按分类建立遮罩",
|
||
"mask content ratio": "遮罩内容比例",
|
||
"Mask contrast adjust": "遮罩对比度调整",
|
||
"Mask contrast schedule is from 0-255. Normal is 1. Affects all masks.": "遮罩对比度调度从 0 到 255。正常为1, 影响所有遮罩",
|
||
"mask created": "遮罩建立完成。",
|
||
"Mask directory": "遮罩图像目录",
|
||
"Mask erosion (-) / dilation (+)": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 2nd": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 3rd": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 4th": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 5th": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 6th": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 7th": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 8th": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 9th": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 10th": "遮罩图像腐蚀 (-) / 遮罩图像膨胀 (+)",
|
||
"Mask file": "遮罩档案",
|
||
"Mask fill": "遮罩填充",
|
||
"Mask for ControlNet Inpaint": "用於 ControlNet 重绘的遮罩",
|
||
"Mask image": "遮罩图像",
|
||
"mask image:": "遮罩图像：",
|
||
"Mask Init": "遮罩初始化",
|
||
"Mask max area ratio": "遮罩区域最大比率",
|
||
"Mask max area ratio 2nd": "遮罩区域最大比率",
|
||
"Mask max area ratio 3rd": "遮罩区域最大比率",
|
||
"Mask max area ratio 4th": "遮罩区域最大比率",
|
||
"Mask max area ratio 5th": "遮罩区域最大比率",
|
||
"Mask max area ratio 6th": "遮罩区域最大比率",
|
||
"Mask max area ratio 7th": "遮罩区域最大比率",
|
||
"Mask max area ratio 8th": "遮罩区域最大比率",
|
||
"Mask max area ratio 9th": "遮罩区域最大比率",
|
||
"Mask max area ratio 10th": "遮罩区域最大比率",
|
||
"Mask merge mode": "遮罩合併模式",
|
||
"Mask merge mode 2nd": "遮罩合併模式",
|
||
"Mask merge mode 3rd": "遮罩合併模式",
|
||
"Mask merge mode 4th": "遮罩合併模式",
|
||
"Mask merge mode 5th": "遮罩合併模式",
|
||
"Mask merge mode 6th": "遮罩合併模式",
|
||
"Mask merge mode 7th": "遮罩合併模式",
|
||
"Mask merge mode 8th": "遮罩合併模式",
|
||
"Mask merge mode 9th": "遮罩合併模式",
|
||
"Mask merge mode 10th": "遮罩合併模式",
|
||
"Mask min area ratio": "遮罩区域最小比率",
|
||
"Mask min area ratio 2nd": "遮罩区域最小比率",
|
||
"Mask min area ratio 3rd": "遮罩区域最小比率",
|
||
"Mask min area ratio 4th": "遮罩区域最小比率",
|
||
"Mask min area ratio 5th": "遮罩区域最小比率",
|
||
"Mask min area ratio 6th": "遮罩区域最小比率",
|
||
"Mask min area ratio 7th": "遮罩区域最小比率",
|
||
"Mask min area ratio 8th": "遮罩区域最小比率",
|
||
"Mask min area ratio 9th": "遮罩区域最小比率",
|
||
"Mask min area ratio 10th": "遮罩区域最小比率",
|
||
"Mask mode": "遮罩模式",
|
||
"Mask Mode": "遮罩模式",
|
||
"Mask Mode(Override img2img Mask mode)": "遮罩模式（覆盖图生图的遮罩模式）",
|
||
"Mask only": "仅遮罩",
|
||
"Mask only the top k largest (0 to disable)": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask only the top k largest (0 to disable) 2nd": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask only the top k largest (0 to disable) 3rd": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask only the top k largest (0 to disable) 4th": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask only the top k largest (0 to disable) 5th": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask only the top k largest (0 to disable) 6th": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask only the top k largest (0 to disable) 7th": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask only the top k largest (0 to disable) 8th": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask only the top k largest (0 to disable) 9th": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask only the top k largest (0 to disable) 10th": "仅處理最大的前 k 个遮罩区域 (0 = 停用)",
|
||
"Mask option": "遮罩选项",
|
||
"Mask overlay blur": "遮罩覆盖模糊度",
|
||
"Mask precision 🡢 mask_precision": "遮罩精度 🡢 mask_precision",
|
||
"Mask Preprocessing": "遮罩處理",
|
||
"Mask schedule": "遮罩调度计劃",
|
||
"Mask Setting": "遮罩设定",
|
||
"Mask size": "遮罩尺寸",
|
||
"Mask source": "遮罩来源",
|
||
"Mask Target (e.g., girl, cats)": "遮罩目标（如 girl, cats）",
|
||
"Mask Threshold": "遮罩阈值",
|
||
"Mask transparency": "遮罩透明度",
|
||
"Mask Upload": "上传遮罩",
|
||
"Mask x(→) offset": "遮罩 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 2nd": "遮罩 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 3rd": "遮罩 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 4th": "遮罩 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 5th": "遮罩 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 6th": "遮罩 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 7th": "遮罩 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 8th": "遮罩 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 9th": "遮罩 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 10th": "遮罩 X 轴 (→) 偏移",
|
||
"Mask y(↑) offset": "遮罩 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 2nd": "遮罩 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 3rd": "遮罩 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 4th": "遮罩 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 5th": "遮罩 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 6th": "遮罩 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 7th": "遮罩 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 8th": "遮罩 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 9th": "遮罩 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 10th": "遮罩 Y 轴 (↑) 偏移",
|
||
"Masked area width (px)": "遮罩区域宽度 (px)",
|
||
"Masked content": "遮罩内容",
|
||
"Masking Method": "遮罩方式",
|
||
"Masking method 🡢 mask_method": "遮罩方法 🡢 mask_method",
|
||
"Masking mode": "遮罩模式",
|
||
"masks from files: in [], like [mask1.png]": "从档案中获取遮罩:[] ，比如 [mask1.png]",
|
||
"Match Frame 0 HSV": "匹配帧 0 HSV",
|
||
"Match Frame 0 LAB": "匹配帧 0 LAB",
|
||
"Match Frame 0 RGB": "匹配帧 0 RGB",
|
||
"Match input size": "符合输入图尺寸",
|
||
"Match input size (size is ignored when using boost)": "符合输入大小（当使用加速器时，大小将被忽略）",
|
||
"Match net size to input size": "符合原图尺寸",
|
||
"Math keyframing explanation docs.google.com/document/d/1pfW1PwbDIuW0cv-dnuyYj1UzPqe23BlSLTJsqazffXM/edit?usp=sharing": "数学关键帧(Math keyframing)解释 docs.google.com/document/d/1pfW1PwbDIuW0cv-dnuyYj1UzPqe23BlSLTJsqazffXM/edit?usp=sharing",
|
||
"Matrix": "矩阵",
|
||
"Matrix mode guide": "矩阵模式指南",
|
||
"Max": "最大值",
|
||
"Max additional denoise": "最大额外去燥",
|
||
"Max Batch Count": "最大批次数量",
|
||
"Max batch-size": "最大单批数量",
|
||
"Max Caption Length (0=unlimited)": "最大描述长度（设 0 为无限制）",
|
||
"Max Caption length (0=unlimited)": "最大描述长度 (0 为无限制)",
|
||
"Max Crop Size": "最大修复尺寸",
|
||
"Max Depth": "最大深度",
|
||
"Max faces units (requires restart)": "最大脸部单元数量 (需要重启)",
|
||
"max frames": "最大帧数",
|
||
"Max frames": "最大帧数量",
|
||
"Max generations (0 = all combinations - the batch count value is ignored)": "最大产生数（0 = 所有组合 - 忽略批次数值）",
|
||
"Max Grad Norms": "最大梯度范数(Max Grad Norms)",
|
||
"Max Gradient norms.": "最大梯度范数(Max Gradient norms)",
|
||
"Max height": "最大高度",
|
||
"Max Image Size": "最大图像尺寸",
|
||
"Max key frames": "最大关键帧数",
|
||
"Max Length": "最大长度",
|
||
"Max magic prompt length": "魔法提示词最大长度",
|
||
"Max models": "最大模型数量",
|
||
"Max number of dataset folders to show": "最多显示幾个数据集目录",
|
||
"Max number of tags": "标记最大数量",
|
||
"Max number of top tags to show": "最多显示幾个常用标记",
|
||
"Max Pixels": "最大尺寸",
|
||
"Max prompt token count": "最大提示词词元计数",
|
||
"Max prompt words for [prompt_words] pattern": "[prompt_words] 格式的最大提示词数量",
|
||
"Max Res": "最大解析度",
|
||
"Max Resolution": "最高解析度",
|
||
"Max resolution of temporary files": "临时档案最大解析度",
|
||
"Max side length": "最大边长",
|
||
"Max steps": "最大叠代步数",
|
||
"Max Token Length": "最大标记长度",
|
||
"Max Token Length (Requires Pad Tokens for > 75)": "最大词元(Token)长度 (词元(Token) > 75 时会进行留空)",
|
||
"Max width": "最大宽度",
|
||
"Max. feedback images": "最大反馈图像数",
|
||
"Max. weight": "最高权重",
|
||
"max_frames": "最大帧数",
|
||
"Maximize area": "最大化面积",
|
||
"Maximum aesthetic_score": "最大美学评分",
|
||
"maximum aesthetic_score": "按美学评分上限过滤",
|
||
"Maximum attention": "最大注意力",
|
||
"Maximum batch size": "最大单批数量",
|
||
"Maximum dimension default": "预设最大尺寸",
|
||
"Maximum execution time (seconds)": "最大执行时间(以秒为单位)",
|
||
"Maximum height": "最大高度",
|
||
"Maximum Image Height:": "图像最大高度",
|
||
"Maximum image size": "最大图像尺寸",
|
||
"Maximum image size, in megapixels": "上述选项的最大图像尺寸，单位：百万像素",
|
||
"Maximum Image Width/Height:": "图像最大宽度/高度：",
|
||
"Maximum Image Width:": "图像最大宽度：",
|
||
"Maximum keyframe gap": "最大关键帧间隔",
|
||
"Maximum Merge models": "最大可合併模型数",
|
||
"Maximum number of checkpoints loaded at the same time": "Stable Diffusion 模型可同时载入的最大数量",
|
||
"Maximum number of faces to detect": "检测的最大人脸数量",
|
||
"Maximum number of images in upscaling cache": "放大缓存中图像的最大数量",
|
||
"Maximum number of tags to be shown in the UI": "UI 能显示的最大标籤数量",
|
||
"Maximum number of tokens after merging (lower improves VRAM usage)": "合併後允许的最大词元数量 (值越低使用越少显存)",
|
||
"Maximum prompt token count": "最大提示词词元长度",
|
||
"Maximum ranking": "最高评分",
|
||
"Maximum results": "最大结果",
|
||
"Maximum score": "最高美学评分",
|
||
"Maximum steps fraction to mirror at": "镜像干涉止步於总叠代步数的",
|
||
"Maximum token length to respect. You probably want to leave this at 75.": "听从的最大词元长度。也许有人想保持本选项数值为 75 。",
|
||
"Maximum width": "最大宽度",
|
||
"Maximum width or height (whichever is higher)": "最大宽度或高度（无论哪个较高）",
|
||
"Maximum width or height default": "最大宽度或高度的预设值",
|
||
"MBW": "分块设定权重(MBW)",
|
||
"MBW Each": "A/B 模型分别分块设定权重 (MBW Each)",
|
||
"mbw weights": "分块权重",
|
||
"mediapipe_face": "mediapipe_face (脸部边缘检测)",
|
||
"mediapipe_face_full": "mediapipe_face_full (写实 脸)",
|
||
"mediapipe_face_mesh": "mediapipe_face_mesh (写实 脸)",
|
||
"mediapipe_face_mesh_eyes_only": "mediapipe_face_mesh_eyes_only (写实 眼)",
|
||
"mediapipe_face_short": "mediapipe_face_short (写实 脸)",
|
||
"medium": "中速",
|
||
"Memo": "备註",
|
||
"Memory": "记忆体",
|
||
"Memory Attention": "记忆体注意力",
|
||
"Memory optimization": "显存最佳化选项",
|
||
"Memory usage": "记忆体使用量",
|
||
"Merge": "合併",
|
||
"merge and apply": "合併後套用",
|
||
"Merge and gen": "融合并生成",
|
||
"Merge And Gen": "融合并生成",
|
||
"Merge and Invert": "合并且反相",
|
||
"Merge and run without saving to drive. Sequential XY merge generations; extract and merge loras, bind loras to ckpt, merge block weights, and more.": "无需储存到硬碟合併并执行。按顺序进行 XY 合併；提取并合併 LoRAs，将 LoRAs 绑定到模型权重存档点，合併区块权重以及更多。",
|
||
"Merge and save": "融合并储存",
|
||
"Merge Block Weighted": "合併块加权",
|
||
"Merge Block Weights": "分块权重融合",
|
||
"Merge Board": "合併面板",
|
||
"Merge LoRAs": "合併 LoRA",
|
||
"Merge mode": "合併模式",
|
||
"Merge Mode": "融合演算法",
|
||
"Merge Model B": "与模型 B 融合",
|
||
"Merge models and load it for generation": "融合模型并载入它生成图像",
|
||
"Merge models with separate rate for each 25 U-Net block (input, middle, output).": "合併模型，每 25 个 U-Net 块（输入、中间、输出）有独立的比率。",
|
||
"Merge multiple models and load it for image generation.": "融合多个模型後载入它生成图像",
|
||
"Merge to Checkpoint": "合併到大模型",
|
||
"Merge!": "融合",
|
||
"Merge&Gen": "融合并生成",
|
||
"Merging Textual Inversion embeddings at runtime from string literals. Phrases and weight values also supported.": "在执行时从字串文字中合併文本反转嵌入。也支援短语和权重值。",
|
||
"Message": "资讯",
|
||
"Meta Tags": "属性标籤 (Tags)",
|
||
"Metadata": "元数据",
|
||
"Metadata in JSON format": "JSON 格式元数据",
|
||
"Metadata to show in XY-Grid label for Model axes, comma-separated (example: \"ss_learning_rate, ss_num_epochs\")": "显示於 X/Y 图表的中继资料，以逗号分隔（例如：\"ss_learning_rate, ss_num_epochs\"）",
|
||
"Metadeta": "元数据",
|
||
"Method": "方案",
|
||
"midas": "MiDaS 深度资讯估算（MiDaS depth estimation）",
|
||
"Midas Resolution": "MiDaS 解析度（MiDaS Resolution）",
|
||
"MiDaS weight (vid2depth)": "MiDaS 权重 (vid2depth)",
|
||
"Middle Name": "中间名",
|
||
"Mimic CFG Scale": "模拟提示词相关性(Mimic CFG Scale)",
|
||
"Mimic Mode": "模拟模式",
|
||
"Mimic Scale": "模拟 CFG 值",
|
||
"Mimic Scale Min": "模拟 CFG 最小值",
|
||
"Min": "最小值",
|
||
"Min batch-size": "最小单批数量",
|
||
"Min height": "最小高度",
|
||
"Min Learning Rate": "最小学习率",
|
||
"Min prompt token count": "最小提示词词元计数",
|
||
"Min reference similarity": "最小参考相似度",
|
||
"Min similarity": "最小相似度",
|
||
"Min tag fraction in batch and interrogations": "单次或批量反推时的最小标籤评分",
|
||
"Min width": "最小宽度",
|
||
"Min-max": "最低 - 最高",
|
||
"Min. strength": "最小强度",
|
||
"Min. weight": "最低权重",
|
||
"min_mask_region_area": "最小遮罩面积",
|
||
"Minecraft": "Minecraft (我的世界)",
|
||
"Minimalist": "Minimalist (极简)",
|
||
"Minimize error": "最小化误差",
|
||
"minimum aesthetic_score": "最小美学分数",
|
||
"Minimum aesthetic_score": "最小美学评分",
|
||
"Minimum attention": "最小注意力",
|
||
"Minimum batch size": "最小单批数量",
|
||
"Minimum dimension default": "预设最小尺寸",
|
||
"Minimum feedback strength at every diffusion step.": "不同迭代步数下的最小反馈强度",
|
||
"Minimum height": "最小高度",
|
||
"Minimum keyframe gap": "最小关键帧间隔",
|
||
"Minimum lighting ratio": "最小照明比率",
|
||
"Minimum number of pages per load": "每次载入的最小页数",
|
||
"Minimum Prior Loss Weight": "最小先前损失权重",
|
||
"Minimum prompt token count": "最小提示词词元长度",
|
||
"Minimum ranking": "最低评分",
|
||
"Minimum score": "最低美学评分",
|
||
"Minimum steps": "最小迭代步数",
|
||
"Minimum width": "最小宽度",
|
||
"Mirror webcam": "镜像网络摄像头",
|
||
"Miscellaneous": "杂项",
|
||
"missing metadata": "缺少中继资料",
|
||
"Mixed": "混合",
|
||
"Mixed Precision": "混合精度",
|
||
"Mixed precision (If your graphics card supports bf16 better)": "混合精度训练（若显卡支援，则 bf16 更佳）",
|
||
"ML-Danbooru Caformer dec-5-97527": "ML-Danbooru Caformer dec-5-97527 (详细 缓慢 推荐)",
|
||
"MLDanbooru Tagger": "ML-Danbooru 标籤器",
|
||
"mlsd": "mlsd (M-LSD 直缐缐条检测)",
|
||
"MLSD": "MLSD (直缐)",
|
||
"MLSD Distance Threshold": "MLSD 距离阈值 (长度)",
|
||
"MLSD Value Threshold": "MLSD 值阈值 (强度)",
|
||
"Mobile Phone": "移动电话",
|
||
"mocha": "mocha/摩卡（深色-暗）",
|
||
"mode": "模式",
|
||
"Mode": "模式",
|
||
"Mode to add the extra tags to the main tag list": "将追加标记加入主标记清单的模式",
|
||
"Mode to use for model list": "模型名称清单的使用模式",
|
||
"model": "模型",
|
||
"Model": "模型",
|
||
"Model 1": "模型 1️⃣",
|
||
"Model 2": "模型 2️⃣",
|
||
"Model 3": "模型 3️⃣",
|
||
"Model 4": "模型 4️⃣",
|
||
"Model 5": "模型 5️⃣",
|
||
"model A": "模型 A",
|
||
"Model A": "模型 A",
|
||
"Model autoload on server start": "伺服器启动时自动载入模型",
|
||
"model B": "模型 B",
|
||
"Model B": "模型 B",
|
||
"model C": "模型 C",
|
||
"Model C": "模型 C",
|
||
"Model cache size (requires restart)": "模型缓存大小（需要储存设定并重新启动）",
|
||
"Model compile backend (experimental)": "模型编译後端 (实验性)",
|
||
"Model compile mode (experimental)": "模型编译模式（实验性）",
|
||
"Model configuration": "模型组态",
|
||
"Model Converter": "模型转换器",
|
||
"Model D": "模型 D",
|
||
"Model description/readme/notes/instructions": "模型的描述资讯",
|
||
"Model directory": "模型目录",
|
||
"Model Epoch:": "模型训练週期：",
|
||
"Model filename:": "模型档名: ",
|
||
"Model Filename:": "模型档名: ",
|
||
"Model format": "模型格式",
|
||
"Model Format": "模型格式",
|
||
"model hash": "模型杂凑值",
|
||
"Model hash": "模型杂凑值",
|
||
"Model Info": "模型资讯",
|
||
"Model is recompiled when resolution, batchsize, device, or samplers like DPM++ or Karras are changed.": "当改变解析度、单批数量、装置、採样方法 (如 DPM++ 或 Karras) 时, 模型将被重新编译",
|
||
"Model Keyword": "Model Keyword (模型关键词)",
|
||
"model list": "模型列表",
|
||
"Model list": "模型列表",
|
||
"Model list will be output here": "模型列表将会在此處输出",
|
||
"Model name": "模型名",
|
||
"Model Name": "模型名称",
|
||
"Model not found, please download one and reload automatic 1111": "无法检索到模型，请至少下载一个後重启 webui",
|
||
"model of the upscaler to use. 'realesr-animevideov3' is much faster but yields smoother, less detailed results. the other models only do x4": "需要使用的超分模型。 'realesr-animevideov3' 速度更快但生成的结果更平滑、更详细。其他超分模型只支援 4 倍放大",
|
||
"Model params": "模型参数",
|
||
"model path": "模型路径",
|
||
"Model path": "模型路径",
|
||
"Model Path": "模型路径",
|
||
"Model path filter": "模型路径过滤器",
|
||
"Model precision": "模型精度",
|
||
"Model Preview XD": "模型预览器",
|
||
"Model Previews": "模型预览器",
|
||
"Model pruning methods": "模型修剪方式",
|
||
"Model Revision:": "模型修正：",
|
||
"Model scheduler to use. Only applies to models before 2.0.": "使用的模型调度器。仅适用於低於 2.0 版本的模型。",
|
||
"Model Selection": "选择模型",
|
||
"Model sort order": "模型排序方式",
|
||
"model to use": "使用的模型",
|
||
"Model Toolkit": "模型工具箱",
|
||
"Model type": "模型类型",
|
||
"Model Type": "模型种类",
|
||
"Model Types": "模型种类",
|
||
"Model URL or Model ID": "模型网址或模型 ID",
|
||
"Model variants": "模型变种",
|
||
"Model Version": "模型版本",
|
||
"Model versions": "模型版本",
|
||
"model-keyword": "模型关键字",
|
||
"model.": " 模型",
|
||
"Model:": "模型: ",
|
||
"model_A": "模型 A",
|
||
"Model_A": "模型A",
|
||
"model_B": "模型 B",
|
||
"Model_B": "模型 B",
|
||
"model_C": "模型 C",
|
||
"model_name": "模型名",
|
||
"ModelID": "模型 ID",
|
||
"models": "模型",
|
||
"Models": "模型",
|
||
"Models directory (if not default)": "模型目录 (如非预设)",
|
||
"Models...": "模型列表...",
|
||
"Modified:": "最後修改日期:",
|
||
"Module Color": "方块颜色",
|
||
"Modules": "模组",
|
||
"Monochrome": "Monochrome (单色)",
|
||
"More advanced options for SD Upscale, less artifacts than original using higher denoise ratio (0.3-0.5).": "比 SD 放大的更为进阶的选项，使用更高的降噪比率 (0.3-0.5)，比原始的更少的人工假象。",
|
||
"More info about Anti Burn": "关於 Anti Burn 的更多资讯",
|
||
"More Information": "更多资讯",
|
||
"Most Downloaded": "Most Downloaded (最多下载)",
|
||
"Most frequent tags in captions": "训练用描述最常用的标记",
|
||
"Most Liked": "Most Liked (最受欢迎)",
|
||
"Motion": "运动",
|
||
"Motion module": "动画模型",
|
||
"Motion parameters:": "运动参数：",
|
||
"Motion preview mode (dry run).": "运动预览模式 (预演)",
|
||
"Motion use prev img": "运动使用前帧渲染图像",
|
||
"Mouse over image: Press": "滑鼠置於图像之上:按住 ",
|
||
"Mouse over the labels to access tooltips that provide explanations for the parameters.": "将滑鼠悬停在标籤上可提供参数的说明提示",
|
||
"Mov2Mov output path for image": "Mov2Mov 图像输出路径",
|
||
"Mov2Mov output path for vedio": "Mov2Mov 影片输出路径",
|
||
"Mov2Mov output path for video": "Mov2Mov 影片输出路径",
|
||
"Move": "移动",
|
||
"Move buttons copy instead of move": "将移动按钮以複製取代",
|
||
"move canvas left/right in pixels per frame": "以每帧多少像素左/右移动画布",
|
||
"move canvas towards/away from view [speed set by FOV]": "将画布靠近/远离镜头 [速度由可视範围设定决定］",
|
||
"move canvas up/down in pixels per frame": "以每帧多少像素上/下移动画布",
|
||
"Move completion popup together with text cursor": "移动弹出视窗至文字游标處",
|
||
"Move ControlNet images to CPU (if applicable)": "将 ControlNet 图像移至 CPU（如果可使用）",
|
||
"Move ControlNet tensor to CPU (if applicable)": "将 ControlNet tensor 移至CPU (如果适用)",
|
||
"Move face restoration model from VRAM into RAM after processing": "脸部修复處理完成後，将此模型从 VRAM 移至 RAM",
|
||
"Move File(s)": "移动档案",
|
||
"Move Mode (X key)": "移动模式(X 键)",
|
||
"Move motion module to CPU (default if lowvram)": "将模型移动到 CPU (lowvram 预设行为)",
|
||
"Move or Delete": "移动或删除",
|
||
"Move or Delete Files": "移动/删除档案",
|
||
"Move quicksettings to image setting panel": "移动快速设定到左侧图像设定面板",
|
||
"Move to archive": "移至归档",
|
||
"Move to directory": "移动到目录",
|
||
"Move to favorites": "移动到收藏夹",
|
||
"Move VAE and CLIP to RAM when training hypernetwork. Saves VRAM.": "训练超网络时将 VAE 和 CLIP 模型移动到记忆体，可节省显存",
|
||
"Move VAE and CLIP to RAM when training if possible": "训练时尽可能将 VAE 与 CLIP 模型移动到记忆体",
|
||
"Move VAE and CLIP to RAM when training if possible. Saves VRAM.": "训练时将 VAE 和 CLIP 从 VRAM 移放到 RAM 如果可行的话，节省 VRAM",
|
||
"Move VAE to GPU": "将 VAE 移至 GPU",
|
||
"Move VAE to GPU (if possible)": "将 VAE 移动到 GPU (如果允许)",
|
||
"Move visible tags to exclude tags": "将可见标籤移至排除标籤",
|
||
"Move visible tags to keep tags": "将可见标籤移至保留标籤",
|
||
"Move/Copy/Delete matching .txt files": "将图像的移动、複製、删除操作应用到与之同名的 txt 档案",
|
||
"Moved or deleted images will be unloaded.": "被移动或被删除的图像会被卸载。",
|
||
"Movie Input": "影片输入",
|
||
"Moving canvas": "移动画布",
|
||
"Moving the canvas": "移动画布",
|
||
"Mul": "倍乘",
|
||
"Multi ControlNet: Max models amount (requires restart)": "ControlNet Unit 的最大数量 (需重启)",
|
||
"Multi Merge": "多重合併",
|
||
"Multi Model Merge": "多模型合併",
|
||
"Multi Proc Cmd": "多进程指令",
|
||
"Multi string search: part1, part2.. (Enter key to update)": "多字符检索: 第 1 部分, 第 2 部分 ... (按回车 [Enter] 键更新)",
|
||
"Multi-ControlNet: ControlNet unit number (requires restart)": "多重 ControlNet: ControlNet 单元数量 (需重启)",
|
||
"Multi-frame rendering": "多帧渲染",
|
||
"Multi-Inputs": "多张上传",
|
||
"multi-subject-render": "多主题绘製",
|
||
"MultiDiffusion Integrated": "MultiDiffusion Integrated 分块绘製放大",
|
||
"Multiple Hypernetworks": "多个超网络",
|
||
"Multiple lane merge support(up to 10). Save and Load your merging combination as Recipes, which is simple text.": "支援多条道路合併(多达10条)，可以将合併组合储存为「食谱」，食谱是一个简单的文字档案。",
|
||
"Multiplication (2^N)": "倍率 (2^N)",
|
||
"Multiplication (x0.5, x1.5)": "倍率 （x0.5, x1.5）",
|
||
"multiplier": "倍率",
|
||
"Multiplier": "倍率",
|
||
"Multiplier (M) - set to 0 to get model A": "倍率（M）- 设为 0 等价於模型 A",
|
||
"Multiplier for extra networks": "额外网络的乘数",
|
||
"multiply": "色彩增值",
|
||
"must be enabled": "选项需要启用",
|
||
"My prompt is more important": "我的提示词更重要",
|
||
"NAIConvert": "NAI转换",
|
||
"naive": "樸素卷积演算法",
|
||
"naive_interpolating": "樸素插值演算法",
|
||
"name": "名称",
|
||
"Name": "名称",
|
||
"Name 0": "名称 0",
|
||
"Name 1": "名称 1",
|
||
"Name 2": "名称 2",
|
||
"Name 3": "名称 3",
|
||
"Name 4": "名称 4",
|
||
"Name 5": "名称 5",
|
||
"Name 6": "名称 6",
|
||
"Name 7": "名称 7",
|
||
"Name 8": "名称 8",
|
||
"Name 9": "名称 9",
|
||
"Name 10": "名称 10",
|
||
"Name 11": "名称 11",
|
||
"Name 12": "名称 12",
|
||
"Name 13": "名称 13",
|
||
"Name 14": "名称 14",
|
||
"Name 15": "名称 15",
|
||
"Name matching rule for preview files": "预览档的名称符合规则",
|
||
"Name of saved checkpoint to load weights from": "用於载入权重的模型名称",
|
||
"Name of the character": "角色名称",
|
||
"Native Diffusers": "原生 Diffusers",
|
||
"native textarea": " 原生文本区域",
|
||
"Nautical": "Nautical (航海)",
|
||
"Navigate image viewer with gamepad": "使用遊戏手柄导览图像检视器",
|
||
"Near clip": "近端衰减",
|
||
"Near schedule": "近處裁面距离调度计劃",
|
||
"Nearest": "最邻近整数缩放（Nearest）",
|
||
"Neck": "颈部",
|
||
"Need help?": "需要帮助？",
|
||
"need help? please visit our": "需要帮助? 请浏览我们的 ",
|
||
"need input your want to translate": "请输入你想翻译的内容",
|
||
"neg_prompt": "反向提示词",
|
||
"negative": "反向",
|
||
"Negative": "反向提示词",
|
||
"Negative Filter": "Negative 过滤器",
|
||
"Negative Guidance minimum sigma": "反向提示词引导最小 sigma",
|
||
"Negative lr weight": "反向的学习率权重",
|
||
"Negative prompt": "反向提示词",
|
||
"Negative Prompt": "反向提示词",
|
||
"Negative prompt\n(Press Ctrl+Enter to generate, Alt+Enter to skip, Esc to interrupt)": "反向提示词 Negative prompt\n(按 Ctrl+Enter 开始生成，Alt+Enter 跳过当前图像，ESC 停止生成)",
|
||
"Negative prompt (press Ctrl+Enter or Alt+Enter to generate)": "反向提示词（按 Ctrl+Enter 或 Alt+Enter 产生）",
|
||
"Negative prompt for hires fix pass.\nLeave empty to use the same negative prompt as in first pass.": "用於高分修复层的反向提示词\n留空以使用与第一层相同的提示词",
|
||
"Negative prompt for upscale (replaces generation prompt)": "用於放大的反向提示词 (取代生成提示词)",
|
||
"Negative prompt mode": "反向提示词模式",
|
||
"negative prompt to be appended to *all* prompts. DON'T use --neg here!": "反向提示词会被新增到左右提示词内，请勿在此處使用 --neg 字段",
|
||
"Negative Prompt Weight": "反向提示词权重",
|
||
"Negative Prompt, will also be appended": "追加反向提示词",
|
||
"Negative prompt: please enter Y if this prompt is a negative prompt.": "反向提示词：如果该提示词是反向提示词，请输入 Y。",
|
||
"Negative Prompts": "反向提示词",
|
||
"Negative strength": "反向情境强度",
|
||
"Negative weight": "反向反馈权重",
|
||
"negative_prompt": "反相提示词",
|
||
"Neon Noir": "Neon Noir (霓虹黑色)",
|
||
"Neon Punk": "Neon Punk (霓虹朋克)",
|
||
"Net dim (128 ~ 144MB)": "网络维度 (128 ~ 144MB)",
|
||
"Net height": "深度图高度",
|
||
"Net width": "深度图宽度",
|
||
"Network module": "附加网路类型",
|
||
"Network module (used throughout this tab)": "附加网络类型(仅此页面使用)",
|
||
"Network module 1": "附加网路类型 1️⃣",
|
||
"Network module 2": "附加网路类型 2️⃣",
|
||
"Network module 3": "附加网路类型 3️⃣",
|
||
"Network module 4": "附加网路类型 4️⃣",
|
||
"Network module 5": "附加网路类型 5️⃣",
|
||
"Never": "从不",
|
||
"Nevysha Cozy Nest Settings": "Nevysha Cozy Nest 设定",
|
||
"Nevysha Cozy Nest Update Info": "Nevysha Cozy Nest 更新资讯",
|
||
"New Canvas Height": "画布高度",
|
||
"New Canvas Width": "画布宽度",
|
||
"new commits": "新提交版本",
|
||
"New defaults will apply after you restart the UI.": "新的预设设定将会在重启 UI 後套用。",
|
||
"New model name": "新模型名称",
|
||
"New Preset": "新预设",
|
||
"New preset name ": "新预设名称",
|
||
"New row": "新一行",
|
||
"New Scribble Drawing Height": "新缐稿画板高度",
|
||
"New Scribble Drawing Width": "新缐稿画板宽度",
|
||
"New text file will be created if you are using filename as captions.": "如果您使用档名作为标籤，将建立新的文本档案",
|
||
"Newest": "Newest (最新)",
|
||
"newest first": "最新的在最前面",
|
||
"Next batch": "下一批",
|
||
"Next page": "下一页",
|
||
"Next Page": "下一页",
|
||
"Nickname": "暱称",
|
||
"nipple.pt": "nipple.pt (2D / 写实 乳头)",
|
||
"no": "否",
|
||
"No": "否",
|
||
"no find:": "未找到：",
|
||
"no image selected": "未选择图像",
|
||
"No interpolation": "无插值",
|
||
"No interpolation will be used. Requires one model; A. Allows for format conversion and VAE baking.": "直接输出主要模型。需要一个模型 A。可用於模型格式转换和嵌入 VAE。",
|
||
"No model has new version": "所有模型均是最新版本",
|
||
"No Preview Found": "查无预览档",
|
||
"no-ema": "删除 EMA 权重",
|
||
"no_NO Localization": "挪威语本地化语言包",
|
||
"Noise": "噪点(点)",
|
||
"Noise Inversion": "噪点反转",
|
||
"Noise mask schedule": "噪点遮罩调度计劃",
|
||
"Noise multiplier for img2img": "图生图的噪声乘数",
|
||
"Noise multiplier for img2img 2nd": "图生图噪点倍率",
|
||
"Noise multiplier for img2img 3rd": "图生图噪点倍率",
|
||
"Noise multiplier for img2img 4th": "图生图噪点倍率",
|
||
"Noise multiplier for img2img 5th": "图生图噪点倍率",
|
||
"Noise multiplier for img2img 6th": "图生图噪点倍率",
|
||
"Noise multiplier for img2img 7th": "图生图噪点倍率",
|
||
"Noise multiplier for img2img 8th": "图生图噪点倍率",
|
||
"Noise multiplier for img2img 9th": "图生图噪点倍率",
|
||
"Noise multiplier for img2img 10th": "图生图噪点倍率",
|
||
"Noise multiplier schedule": "噪点倍率调度计劃",
|
||
"noise multiplier; applies to Euler a and other samplers that have the letter 'a' in them": "噪点倍率; 应用於 Euler a 和其他带 a 的採样方法",
|
||
"noise multiplier; applies to Euler A and other samplers that have the letter 'a' in them": "噪点倍率; 适用於 Euler a 和其他带有 ‘a’ 的採样方法",
|
||
"Noise schedule": "噪点调度计劃",
|
||
"Noise schedule for sampling": "採样噪点调度器类型",
|
||
"Noise scheduler": "噪点调度器",
|
||
"Noise Strength": "噪点强度",
|
||
"Noise Tolerance": "噪点容忍度",
|
||
"Noise type": "噪点类型",
|
||
"none": "无",
|
||
"None": "无",
|
||
"NONE": "无",
|
||
"None (just grayscale)": "什麼都不做（灰度模式）",
|
||
"None - prompt only": "无 - 仅提示词",
|
||
"norm": "範数",
|
||
"normal": "普通",
|
||
"Normal Background Threshold": "背景辨识阈值",
|
||
"Normal background threshold": "背景辨识阈值（Normal background threshold）",
|
||
"Normal Resolution": "法缐贴图解析度（Normal Resolution）",
|
||
"Normal with batch": "正常（带批處理）",
|
||
"normal_bae": "normal_bae (Bae 法缐贴图提取 新)",
|
||
"normal_midas": "normal_midas (Midas 法缐贴图提取 旧)",
|
||
"Normalizes each image separately by mean and standard deviation in your dataset. Useful to preserve likeness to your images.": "根据数据集中的平均值和标准差分别对每幅图像进行归一化處理。有助於保持图像的相似性。",
|
||
"Normally, changing the resolution will completely change an image, even when using the same seed. If you generated an image with a particular seed and then changed the resolution, put the original resolution here to get an image that more closely resemles the original": "一般情况下，即使使用相同的种子，改变解析度也会完全改变图像。如果使用特定种子生成图像，然後但又需要改变解析度，请在此输入原始解析度以获得更接近原始解析度的图像。",
|
||
"Normally, it creates a single random prompt. With prompt compounder, it will generate multiple prompts and compound them together.": "一般情况下只能建立一个单一的随机提示。但有了提示词混合，可以生成多个提示词并将它们複合在一起。",
|
||
"NormalMap": "NormalMap (法缐贴图)",
|
||
"Norwegian localization": "挪威语本地化",
|
||
"Nose To Neck": "鼻颈距离",
|
||
"not": "不会",
|
||
"not save grid": "不储存网格图",
|
||
"note": "注意事项",
|
||
"Note": "注意事项",
|
||
"Note that parseq overrides:": "以下参数将会被参数定序器覆盖设定：",
|
||
"Note:": "注意：",
|
||
"Note: Each model will download between 300mb and 1.4gb of data on first use.": "註记：每个模型第一次使用时会下载 300MB 到 1.4GB 的档案。",
|
||
"NOTE: If the 'Generate' button doesn't work, go in Settings and click 'Restart Gradio and Refresh...'.": "注意：如果“生成”按钮不起作用，请进入“设定”并单击“重启 Gradio 及刷新...”。",
|
||
"Note: Moved or deleted images will be unloaded.": "备註：已移动或已删除的图像将被卸载。",
|
||
"Notes": "备註",
|
||
"Nothing": "无",
|
||
"Nothing here. Add some content to the following directories:": "这裡什麼都没有。加入一些内容至以下目录：",
|
||
"Nothing selected": "未选取",
|
||
"Notification sound volume": "通知音量",
|
||
"Now use it like this:": "然後像这样使用：",
|
||
"NSFW checker": "NSFW 检查器",
|
||
"NSFW content": "允许成人内容",
|
||
"NSFW score threshold. Any image part with a score above this value will be treated as NSFW (use extension responsibly !). 1=Disable filtering": "NSFW 评分阈值。分数高於预设值的会被视为 NSFW 图像 (做人做事应有责任心)。1 = 停用 NSFW 过滤",
|
||
"Nucleus Sampling": "Nucleus Sampling (核心取样)",
|
||
"NUl Image Enhancer": "NUI 图像增强",
|
||
"Number": "数量",
|
||
"Number of cached models": "缓存大模型数量",
|
||
"Number of cached VAEs": "缓存 VAE 数量",
|
||
"Number of clusters:": "簇数：",
|
||
"Number of columns for added settings": "新增设定的列数",
|
||
"Number of columns on image gallery": "图库显示图像列数",
|
||
"Number of columns on the page": "每页列数",
|
||
"Number of connections to use for downloading a model": "下载模型时使用的连缐数",
|
||
"Number of epochs": "epoch 数量",
|
||
"Number of epochs after which training will be paused for the specified time. Useful if you want to give your GPU a rest.": "每训练多少 Epoch 後暂停。使 GPU 充分休息。",
|
||
"Number of frames": "总帧数",
|
||
"Number of frames for lead in/out": "汇入／汇出帧数",
|
||
"Number of grids in each row": "每行显示多少格",
|
||
"Number of Hard Resets": "硬重设数量",
|
||
"number of images to delete consecutively next": "接下来要连续删除的图像数",
|
||
"Number of iterations": "迭代次数",
|
||
"Number of Lora networks to keep cached in memory": "可缓存在内存中的 Lora 模型数量",
|
||
"Number of negative vectors per token": "每个标记的反向向量数",
|
||
"Number of parallel calculations": "并行计算数",
|
||
"Number of pictures displayed on each page": "每页显示的图像数量",
|
||
"Number of random seed(s)": "随机种子数量",
|
||
"Number of repeats for a single input image per epoch; used only for displaying epoch number": "每期（epoch）中单个输入图像的重複次数； 仅用於显示期（epoch）数",
|
||
"Number of rows on the page": "每页行数",
|
||
"Number of samples to generate": "要生成的样本数量",
|
||
"Number of Samples to Generate": "产生样本的数量",
|
||
"Number of sampling steps for upscaled picture. If 0, uses same as for original.": "放大图像的取样步数。如果为0，则使用与原始图像相同的值。",
|
||
"Number of sampling steps to use when generating preview images.": "生成预览图像时要使用的採样迭代步数",
|
||
"number of seed": "种子值",
|
||
"Number of steps for the warmup in the lr scheduler.": "学习率调度器中的预热步数",
|
||
"Number of steps for the warmup in the lr scheduler. LR will start at 0 and increase to this value over the specified number of steps.": "LR 调度器中预热的步数。LR 会从 0 开始按指定的步数内递增至该值。",
|
||
"number of the frames that we will blend between current imagined image and input frame image": "当前想像图像和输入帧图像之间混合的帧数",
|
||
"Number of updates steps to accumulate before performing a backward/update pass.": "在执行反向传播/更新之前累积的更新步数。",
|
||
"Number of vectors per token": "每个标记的向量数",
|
||
"object - Can be a random object, a building or a vehicle.": "object - 物件 - 可以是一个随机的物体，也可以是一个建筑物或一辆车。",
|
||
"official Deforum Discord": "官方 Deforum Discord",
|
||
"Official Deforum Wiki:": "官方 Deforum Wiki：",
|
||
"Offset Noise": "噪声偏移",
|
||
"old localizations": "过时的本地化语言包",
|
||
"Old unmaintained localizations that used to be a part of main repository": "曾经在主分支上但现在不再维护的旧语言包",
|
||
"oldest first": "最旧的在最前面",
|
||
"On": "开",
|
||
"On, concurrent (don't pause generation)": "开, 并發處理 (不暂停生成程序)",
|
||
"once": "一次",
|
||
"Once turned on, it will retry for n amount of times to get an image with the quality score. If not, it will take the best image so far and continue.": "一旦启用，它将持续生成 N 次以获得具有一定品质分数的图像。如果没有，它将保留评分最好的图像持续生成。",
|
||
"Once you select a model it will take some time to load.": "模型选择後将花费一段时间载入。",
|
||
"One Button Prompt": "One Button Prompt (一键生成提示词)",
|
||
"One Button Run and Upscale": "一键执行并放大",
|
||
"One-Time Hash Generation for externally downloaded models.": "为外部下载模型进行一次性杂凑生成",
|
||
"online": "缐上",
|
||
"Online 3D Openpose Editor": "在缐 3D Openpose 编辑器",
|
||
"Online resources:": "在缐资源：",
|
||
"Only": "只有",
|
||
"only 2D motion parameters will be used, but this mode uses the least amount of VRAM. You can optionally enable flip_2d_perspective to enable some psuedo-3d animation parameters while in 2D mode.": "将只使用 2D 运动参数，该模式下使用的显存最少。你可以选择启用 2D 透视翻转，以便在 2D 模式下启用一些模拟 3D 动画的参数",
|
||
"only affects the 'Blend'": " 仅影响 '混合' ",
|
||
"Only applies to inpainting models. Determines how strongly to mask off the original image for inpainting and img2img. 1.0 means fully masked, which is the default behaviour. 0.0 means a fully unmasked conditioning. Lower values will help preserve the overall composition of the image, but will struggle with large changes.": "仅适用於区域重绘专用的模型（模型後缀为 inpainting.ckpt 的模型）。决定了遮罩在区域重绘以及图生图中遮蔽原图内容的强度。 1.0 表示完全遮蔽原图，这是预设行为。 0.0 表示完全不遮蔽让原图进行图像调节。较低的值将有助於保持原图的整体构图，但很难遇到较大的变化。",
|
||
"Only copy to models with no metadata": "仅複製到没有中继资料的模型（不覆盖原中继资料）",
|
||
"Only copy to models with same session ID": "仅複製到具有相同作业阶段 ID 的模型",
|
||
"Only extract keyframes (recommended)": "只提取关键帧（推荐）",
|
||
"only for training": "仅用於训练",
|
||
"Only Hand": "仅显示手部(移除脚部)",
|
||
"Only hidden": "仅显示隐藏图像",
|
||
"ONLY in use when working with a P2P ckpt!": "此选项仅在载入 Pix2Pix 模型时生效",
|
||
"Only keep one model on device": "仅保留一个模型在显存中",
|
||
"Only masked": "仅被遮罩",
|
||
"Only masked padding, pixels": "仅填充遮罩部分（像素）",
|
||
"Only Mouth": "仅嘴部",
|
||
"only other types --> Will pick only from the more unique types, such as stained glass window or a funko pop": "only other types -- 仅其它类型 --> 只从其他更独特的类型中挑选，如彩色玻璃窗或一隻玩具人偶。",
|
||
"Only Selected Tags": "仅选中标籤",
|
||
"Only send requests to these workers": "仅向这些节点發送请求",
|
||
"Only send requests to trusted workers": "仅向白名单中的节点發送请求",
|
||
"Only show .safetensors format models": "仅显示 .safetensors 档案格式的模型",
|
||
"Only show alias": "仅显示别名",
|
||
"Only Show Models have no Info": "只显示缺少资讯的模型",
|
||
"Only show models that have/don't have user-added metadata": "仅显示（有 / 无）使用者中继资料",
|
||
"Only store preferences locally": "仅在本地储存设定",
|
||
"Only track the mouth": "仅追踪嘴部",
|
||
"Only upscale will not use txt2img to generate an image.": "仅放大时不会通过文生图功能生成图像",
|
||
"Only use mid-control when inference": "仅在生成图像时使用中间层控制 (mid-control)",
|
||
"Only use Random seeds (Unless comparing paths)": "只用随机种子（除非需要对比变迁轨迹）",
|
||
"Only user list": "仅使用者清单",
|
||
"Onnx model filename": "Onnx 模型档名 (包含路径)",
|
||
"ONNX opset version": "ONNX 算子集版本",
|
||
"Opacity": "不透明度",
|
||
"Open drawing canvas!": "建立绘图画布（使用手绘草稿而非上传的图像）",
|
||
"Open for Clip Aesthetic!": "打开以调整 CLIP 美学！",
|
||
"Open images output directory": "打开图像输出目录",
|
||
"Open images output directory.": "开启图像输出目录",
|
||
"Open intermediate results": "立即开启当前效果图",
|
||
"Open model Url on the user's client side, rather than server side": "在使用者客户端侧开启模型网址，而不是服务端侧",
|
||
"Open model Url on the user's client side, rather than server side. If you are running WebUI locally, disabling this may open URLs in your default internet browser if it is different than the one you are running WebUI in": "在使用者客户端侧开启模型网址，而不是服务端侧。如果是在本地执行 WebUI，停用本选项可能会导致使用预设浏览器开启模型网址 (如果预设浏览器与正执行 WebUI 的浏览器不同)",
|
||
"Open model Url on the user's client side, rather than server side.If you are running WebUI locally, disabling this may open URLs in yourdefault internet browser if it is different than the one you are runningWebUI in": "在使用者客户端侧开启模型网址，而不是服务端侧。如果是在本地执行 WebUI，停用本选项可能会使用预设浏览器开启模型网址 (如果预设浏览器与正执行 WebUI 的浏览器不同)",
|
||
"Open new canvas": "开启新画布",
|
||
"Open New Canvas": "打开新画布",
|
||
"Open New Scribble Drawing Canvas": "建立新的缐稿画板",
|
||
"Open output directory": "开启输出目录",
|
||
"Open results": "开启最终效果图",
|
||
"Open TextEditor": "开启文本编辑器",
|
||
"Open the generated .ebs under project directory and press [Run All] button.": "开启工程目录下生成的 .ebs 档案，然後按 [Run All] 按钮。",
|
||
"Open this model's civitai url": "在新页籤开启本模型的 Civitai 页面",
|
||
"Open Url At Client Side": "在客户端侧开启网址",
|
||
"Open...": "开启...",
|
||
"open_url_button": "开启网址按钮",
|
||
"openOutpaint": "开源图像延伸模组",
|
||
"openOutpaint extension": "openOutpaint 延伸模组",
|
||
"openpose": "openpose (OpenPose 姿态)",
|
||
"OpenPose": "OpenPose (姿态)",
|
||
"OpenPose Editor": "OpenPose编辑器",
|
||
"openpose-editor": "openPose 编辑器",
|
||
"openpose_face": "openpose_face (OpenPose 姿态及脸部)",
|
||
"openpose_faceonly": "openpose_faceonly (OpenPose 仅脸部)",
|
||
"openpose_full": "openpose_full (OpenPose 姿态、手部及脸部)",
|
||
"openpose_hand": "openpose_hand (OpenPose 姿态及手部)",
|
||
"Optical Flow": "光流法",
|
||
"Optical flow cadence": "生成间隔中启用光流法",
|
||
"Optical flow generation": "光流生成",
|
||
"Optimal batch-size": "最优单批数量",
|
||
"Optimal height": "最优高度",
|
||
"Optimal prompt token count": "最优提示词词元计数",
|
||
"Optimal width": "最优宽度",
|
||
"Optimizations": "最佳化设定",
|
||
"Optimize attention layers with sdp (torch >= 2.0.0 required)": "使用 sdp 最佳化注意力层 (需 torch >= 2.0.0)",
|
||
"Optimize attention layers with xformers": "使用 xformers 最佳化注意力层",
|
||
"Optimize GIFs with gifsicle, reduces file size": "使用 gifsicle 最佳化 GIF，减小档案大小",
|
||
"Optimizer": "优化器",
|
||
"Optimizer algorithm.\nRecommended settings (LR = Learning Rate, WD = Weight Decay):\nTorch / 8Bit AdamW - LR: 2e-6, WD: 0.01\nLion - LR: 5e-7, WD: 0.02\nAdamW Adapt - LR: 0.05, WD: 0\nLion Adapt - LR: ??, WD:0\nSGD Adapt - LR: 1, WD: 0\nAdan Adapt - LR: 0.2, WD: 0.01": "最佳化设定。\n推荐以下设定 (LR = 学习率, WD = 权重衰减):\nTorch / 8Bit AdamW - LR: 2e-6, WD: 0.01\nLion - LR: 5e-7, WD: 0.02\nAdamW Adapt - LR: 0.05, WD: 0\nLion Adapt - LR: ??, WD:0\nSGD Adapt - LR: 1, WD: 0\nAdan Adapt - LR: 0.2, WD: 0.01",
|
||
"Optimizer type": "最佳化器类型",
|
||
"optimizes the self-attention layer within U-Net and VAE models,\n resulting in a reduction in computation time ranging from 1 to 4 times. The larger the generated image is, the greater the\n benefit.": " 最佳化 U-Net 和 VAE 模型的自注意力层，使计算时间减少 50% 到 75% 不等。生成的图像越大，效果越明显。",
|
||
"Optional, uses selected model's directory if blank": "可选，若留空则使用预设目录",
|
||
"Optionally use [filewords] to read image captions from files.": "可以选择使用 [filewords] 从档案中读取图像标题。",
|
||
"Options": "选项",
|
||
"Options are all options hardcoded, and additional you added in additional_components.py": "选项都是硬编码的选项，并且是您在 additional_components.py 中新增的附加选项",
|
||
"Options can be given weights:": "可以给选项权重：",
|
||
"Options in main UI": "主介面额外选项",
|
||
"Options in main UI - img2img": "主介面额外选项 - 图生图",
|
||
"Options in main UI - number of columns": "主介面的额外选项 - 列数",
|
||
"Options in main UI - place into an accordion": "主介面的额外选项 - 置入一个手风琴容器",
|
||
"Options in main UI - txt2img": "主介面额外选项 - 文生图",
|
||
"opts onchange": "选项更改",
|
||
"or": "或",
|
||
"OR": "或",
|
||
"or to CTRL+SHIFT": "或是 Ctrl + Shift",
|
||
"or, manually enhance the image": "↓手动控制图像增强参数↓",
|
||
"Order": "排序",
|
||
"Organization": "组织",
|
||
"Origami": "Origami (日本折纸)",
|
||
"original": "原图",
|
||
"Original Deforum Github repo github.com/deforum/stable-diffusion": "原始 Deforum Github 储存库 github.com/deforum/stable-diffusion",
|
||
"Original file's hash (good for deleting duplication)": "原始档案的杂凑值（有利於删除重複项）",
|
||
"Original filename without extension": "没有副档名的原始档名",
|
||
"Original file’s hash (good for deleting duplication)": "原始档案杂凑值 (有助於检测重複项)",
|
||
"Original First": "原文优先",
|
||
"Original FPS": "原始 FPS",
|
||
"Original Image": "原始图像",
|
||
"Original model": "原始模型",
|
||
"Original Movie Path": "原始影片路径（路径和档名均不可包含中文、下劃缐和特殊符号）",
|
||
"Original negative prompt": "初始反向提示词",
|
||
"Original prompt": "初始提示词",
|
||
"Original Text = \"A, A, B, C\" Common Tags = \"B, A\" Edit Tags = \"X, Y\"": "原文本 = \"A, A, B, C\" 常用标籤 = \"B, A\" 编辑标籤 = \"X, Y\"",
|
||
"Original Text = \"A, B, C\" Common Tags = \"(nothing)\" Edit Tags = \"X, Y\"": "原文本 = \"A, B, C\" 常用标籤 = \"(nothing)\" 编辑标籤 = \"X, Y\"",
|
||
"Original Text = \"A, B, C, D, E\" Common Tags = \"A, B, D\" Edit Tags = \", X, \"": "原文本 = \"A, B, C, D, E\" 常用标籤 = \"A, B, D\" 编辑标籤 = \", X, \"",
|
||
"Original total duration": "原始总时长",
|
||
"Original total frames": "原始总帧数",
|
||
"original video frame": "原始视频帧",
|
||
"Original Weights": "原始权重",
|
||
"Original:": "原项目:",
|
||
"OriginalImg": "OriginalImg (原始输入的第一帧)",
|
||
"Other": "其他",
|
||
"other imports": "其他汇入项",
|
||
"Other Info": "其他资讯",
|
||
"Other prompt fields": "其他提示词段",
|
||
"Other Setting": "其他设定",
|
||
"Other:": "其他:",
|
||
"others": "其他",
|
||
"Others": "其他",
|
||
"Otherwise, read the": "否则，请阅读",
|
||
"OUT": "输出层",
|
||
"Out Res": "输出解析度",
|
||
"OUT00": "输出层 00",
|
||
"OUT01": "输出层 01",
|
||
"OUT02": "输出层 02",
|
||
"OUT03": "输出层 03",
|
||
"OUT04": "输出层 04",
|
||
"OUT05": "输出层 05",
|
||
"OUT06": "输出层 06",
|
||
"OUT07": "输出层 07",
|
||
"OUT08": "输出层 08",
|
||
"OUT09": "输出层 09",
|
||
"OUT10": "输出层 10",
|
||
"OUT11": "输出层 11",
|
||
"OUT_A_00": "模型 A 输出层 00",
|
||
"OUT_A_01": "模型 A 输出层 01",
|
||
"OUT_A_02": "模型 A 输出层 02",
|
||
"OUT_A_03": "模型 A 输出层 03",
|
||
"OUT_A_04": "模型 A 输出层 04",
|
||
"OUT_A_05": "模型 A 输出层 05",
|
||
"OUT_A_06": "模型 A 输出层 06",
|
||
"OUT_A_07": "模型 A 输出层 07",
|
||
"OUT_A_08": "模型 A 输出层 08",
|
||
"OUT_A_09": "模型 A 输出层 09",
|
||
"OUT_A_10": "模型 A 输出层 10",
|
||
"OUT_A_11": "模型 A 输出层 11",
|
||
"OUT_B_00": "模型 B 输出层 00",
|
||
"OUT_B_01": "模型 B 输出层 01",
|
||
"OUT_B_02": "模型 B 输出层 02",
|
||
"OUT_B_03": "模型 B 输出层 03",
|
||
"OUT_B_04": "模型 B 输出层 04",
|
||
"OUT_B_05": "模型 B 输出层 05",
|
||
"OUT_B_06": "模型 B 输出层 06",
|
||
"OUT_B_07": "模型 B 输出层 07",
|
||
"OUT_B_08": "模型 B 输出层 08",
|
||
"OUT_B_09": "模型 B 输出层 09",
|
||
"OUT_B_10": "模型 B 输出层 10",
|
||
"OUT_B_11": "模型 B 输出层 11",
|
||
"Outer Fit (Shrink to Fit)": "贴合外边 (收缩以贴合)",
|
||
"Outfill border color:": "填充颜色：",
|
||
"Outfill method:": "填充方法：",
|
||
"outline inflating": "轮廓填充",
|
||
"Outpainting direction": "向外绘製的方向",
|
||
"Outpainting mk2": "向外绘製第二版",
|
||
"output": "输出",
|
||
"Output": "输出",
|
||
"Output animation path": "动画输出路径",
|
||
"Output Batches": "输出批次数",
|
||
"Output DepthMap": "储存深度图",
|
||
"Output directory": "输出目录",
|
||
"Output Directory": "输出目录",
|
||
"Output directory for grids": "网格图输出目录",
|
||
"Output directory for grids; if empty, defaults to two directories below": "宫格图的输出目录； 如果为空，则预设为以下两个目录",
|
||
"Output directory for images from extras tab": "更多页籤的输出目录",
|
||
"Output directory for images; if empty, defaults to three directories below": "图像的输出目录； 如果为空，则预设为以下三个目录",
|
||
"Output directory for img2img grids": "图生图宫格的输出目录",
|
||
"Output directory for img2img images": "图生图的输出目录",
|
||
"Output directory for mask previews": "遮罩预览的输出目录",
|
||
"Output directory for masks": "遮罩输出目录",
|
||
"Output directory for txt2img grids": "文生图宫格的输出目录",
|
||
"Output directory for txt2img images": "文生图的输出目录",
|
||
"Output filename": "输出档名",
|
||
"Output filename format": "输出档名格式",
|
||
"Output filename formats": "输出档名格式",
|
||
"Output format": "输出格式",
|
||
"output height resolution": "输出高度解析度",
|
||
"Output Image Width": "输出图像宽度",
|
||
"output images will be placed in a folder with this name ({timestring} token will be replaced) inside the img2img output folder. Supports params placeholders. e.g {seed}, {w}, {h}, {prompts}": "输出图像会置於图生图输出目录内含此名称的目录中。( {timestring} 这个词元会被取代) \n也支援参数佔位符, 例如: {seed}, {w}, {h}, {prompts} 等",
|
||
"output images will be placed in a folder with this name, inside of the img2img output folder": "输出图像将会储存在指定名字的目录内，用於取代原有的图生图输出目录",
|
||
"Output images will be shown here": "输出图像会在此處展示",
|
||
"Output Mask directory": "遮罩输出目录",
|
||
"Output Mode": "输出模式",
|
||
"Output Model Name": "输出模型档名",
|
||
"Output name": "输出名称",
|
||
"Output name:": "输出名称: ",
|
||
"Output path": "输出路径",
|
||
"Output Paths": "输出路径",
|
||
"Output per image:": "单独输出每张图像：",
|
||
"output resolution": "输出解析度",
|
||
"Output Root": "Output 目录根目录",
|
||
"Output settings: all settings (including fps and max frames)": "输出设定：所有设定（包括帧率和最大帧数）",
|
||
"Output Size": "输出尺寸",
|
||
"Output style": "输出类型",
|
||
"Output type": "输出类型",
|
||
"output video resolution": "输出影片的解析度",
|
||
"outputs": "输出",
|
||
"Overlap": "重叠",
|
||
"Overlap ratio": "重叠比率",
|
||
"overlay": "覆盖",
|
||
"Overlay mask": "覆盖遮罩",
|
||
"Overlay original for inpaint": "重绘时使用原图覆盖遮罩外区域",
|
||
"Override": "覆盖",
|
||
"Override `Denoising strength` to 1?": "覆写「重绘幅度」为 1？",
|
||
"Override `prompt` to the same value as `original prompt`?(and `negative prompt`)": "覆写「提示词」为「初始提示词」？（「反向提示词」同理）",
|
||
"Override `Sampling method` to Euler?(this method is built for it)": "覆写「採样方法」为 Euler？（这个方法就是为它设计的）",
|
||
"Override `Sampling Steps` to the same value as `Decode steps`?": "覆写「取样叠代步数」为「解码叠代步数」？",
|
||
"Override inpaint to original": "覆写区域重绘中的原图",
|
||
"Override mask blur to 0": "遮罩模糊数值覆写为 0",
|
||
"Override options (choose the related subject type first for better results)": "覆盖选项 (首选相关的主题类型以获得更好的结果)",
|
||
"Override settings": "覆写设定",
|
||
"Override the sampling selection from the main UI (Recommended as only below sampling methods have been validated for OpenVINO)": "覆盖主介面的採样方法选择 (推荐开启, 因为仅以下採样方法已针对 OpenVINO 进行了验证)",
|
||
"override:": "覆盖以下参数：",
|
||
"override_settings": "覆盖设定",
|
||
"overwrite": "允许覆盖",
|
||
"Overwrite": "覆写",
|
||
"Overwrite any existing previews, tags or descriptions.": "覆盖任意已存在的预览图, 标籤, 或描述",
|
||
"Overwrite Checkpoint if exist (else will add number)": "覆盖已存在的同名模型 (不勾选将会在名称後新增序号)",
|
||
"Overwrite existing": "覆写既有",
|
||
"Overwrite extracted frames": "覆盖已有帧",
|
||
"Overwrite image size": "覆写图像尺寸",
|
||
"Overwrite input frames": "覆盖输入帧",
|
||
"Overwrite Old Embedding": "覆写旧的嵌入",
|
||
"Overwrite Old Hypernetwork": "覆写旧的超网路（Hypernetwork）",
|
||
"Overwrite priority": "覆盖优先级",
|
||
"Overwrite subject": "覆盖主题",
|
||
"Overwrite subject:": "覆盖主题:",
|
||
"Overwrite type of image:": "覆盖图像类型",
|
||
"p value": "p 值",
|
||
"Pad begin/end frames": "预留开始/结束帧",
|
||
"Pad prompt/negative prompt": "填充提示词/反向提示词到等长",
|
||
"Pad prompt/negative prompt (v0)": "填充提示词/反向提示词到等长 (v0)",
|
||
"Pad prompt/negative prompt to be same length": "补齐正向/反向提示词到相同长度",
|
||
"Pad the input images token lenght to this amount. You probably want to do this.": "将输入图像的词元长度垫齐到此数量。你可能会想要这样做",
|
||
"Pad the input images token length to this amount. You probably want to do this.": "把输入图像的词元长度填充到本选项设定长度。也许会有人有这个需求。",
|
||
"Pad Tokens": "填充标记",
|
||
"Padding": "内距",
|
||
"Padding mode": "填充模式",
|
||
"Padding Mode": "填充模式",
|
||
"Padding options": "填充选项",
|
||
"Padding token (ID or single token)": "填充提示词(完整ID或者单个提示词)",
|
||
"Page": "页面",
|
||
"Page Index": "页数",
|
||
"Page navigation as header": "页面导览列作为页眉",
|
||
"Page Number": "页数",
|
||
"Pages:": "页码：",
|
||
"pan canvas left/right in degrees per frame": "以每帧为单位向左/向右偏移画布",
|
||
"Panorama to 3D mesh": "全景图转 3D 网格",
|
||
"Panorama Viewer": "全景图像检视器",
|
||
"Paper Mache": "Paper Mache (纸浆模)",
|
||
"Paper Quilling": "Paper Quilling (衍纸艺术)",
|
||
"Papercut Collage": "Papercut Collage (拼贴剪纸)",
|
||
"Papercut Shadow Box": "Papercut Shadow Box (剪纸影盒)",
|
||
"Parameter": "参数",
|
||
"Parameters": "参数",
|
||
"Parameters to take from png info": "从 PNG 资讯中提取的参数",
|
||
"Params": "参数",
|
||
"Parse Recipe": "剖析配方",
|
||
"Parse Result": "剖析结果",
|
||
"Parse!": "解析",
|
||
"Parseq": "参数定序器 (parameter sequencer)",
|
||
"Parseq does": "参数定序器将",
|
||
"Parseq Manifest (JSON or URL)": "参数定序器组态档案（JSON 或者网址）",
|
||
"Parses instance prompts separated by the following characters [,;.!?], and prevents breaking up tokens when using the tokenizer. Useful if you have prompts separated by a lot of tags.": "解析被以下字元分隔的实例提示词 [,;.!?] ，并防止在使用词元分析器时将词元打乱。在有被大量字元分隔的提示词时十分有用。",
|
||
"Passing ControlNet parameters with \"Send to img2img\"": "使用\"發送到图生图\"时传输 ControlNet 参数",
|
||
"Password": "密码",
|
||
"paste": "贴上",
|
||
"Paste available values into the field": "将可用的值贴上到字段中",
|
||
"Paste ControlNet parameters in infotext": "将 ControlNet 参数写入到生成资讯中",
|
||
"paste_append": "贴上附件",
|
||
"Path": "路径",
|
||
"Path for saving your persistent settings file:": "持久性设定档案的储存路径",
|
||
"path name": "路径名",
|
||
"Path relative to the webui folder": "相对於 webui 目录的路径",
|
||
"Path to classifier ckpt, can be empty": "分类器的路径，可以是空白",
|
||
"Path to directory containing annotator model directories (requires restart, overrides corresponding command line flag)": "包含预處理器模型的路径（需要重新启动，取代命令行设置）",
|
||
"Path to directory where to write outputs": "进行输出的目录路径",
|
||
"Path to directory with classification images": "分类图像的目录路径",
|
||
"Path to directory with input images": "带有输入图像的目录路径",
|
||
"Path to JSON file with concepts to train, or a JSON string.": "包含要训练的概念的 JSON 档案的路径，或 JSON 字串",
|
||
"Path to JSON file with concepts to train.": "带有要训练概念的 JSON 档案的路径。",
|
||
"Path to read videos from": "读取影片的路径",
|
||
"Path to save AnimateDiff motion modules": "AnimateDiff 运动模组储存路径",
|
||
"Path to save results of sadtalker": "Sadtalker 输出结果储存路径",
|
||
"Path to settings file you want to load. Path can be relative to webui folder OR full - absolute": "需要载入的设定档案路径。该路径可以相对於 SD-WebUI 根目录，也可以是完整的绝对路径",
|
||
"Path to store extracted frame sets in": "储存截取帧的路径",
|
||
"path/to/classify": "分类/路径",
|
||
"path/to/output": "输出/路径",
|
||
"Path:": "路径: ",
|
||
"path_recorder": "路径记录",
|
||
"Paths for saving": "储存路径",
|
||
"Pause": "暂停",
|
||
"Pause After N Epochs": "N 阶段後暂停",
|
||
"PBRemTools": "精确背景去除工具",
|
||
"penisV2.pt": "penisV2.pt (2D / 写实 生殖器 男)",
|
||
"per side": "每边数量",
|
||
"Percentage of tokens to be merged (higher improves speed)": "Token 合併的中词元被合併的百分比 (值越高速度提升越大)",
|
||
"Perform warmup": "进行预热",
|
||
"performance": "性能",
|
||
"performance is measured in iterations per second (it/s) and reported for different batch sizes (e.g. 1, 2, 4, 8, 16...)": "性能以每秒多少迭代次数 (it/s) 作为单位，并按不同的单批数量 (如 1、2、4、8、16......) 进行报告。",
|
||
"Performance Wizard (WIP)": "效能嚮导（半成品）",
|
||
"perlin": "柏林 (perlin)",
|
||
"Perlin noise is a more natural looking noise. It is heterogeneous and less sharp than uniform noise, this way it is more likely that new details will appear in a more coherent way. This is the new default setting.": "柏林噪点是一种看起来更自然的噪点。与均匀噪点相比，它具有异质性且不那麼锐利，这种方法可以以更加连贯的方式出现新的细节。这是新版本的预设设定。",
|
||
"Perlin octaves": "柏林噪点倍频",
|
||
"Perlin persistence": "柏林噪点递增幅度",
|
||
"persistent cond cache": "持久化调整缓存",
|
||
"Persistent cond cache": "持久化调整缓存",
|
||
"person_yolov8n-seg.pt": "person_yolov8n-seg.pt (2D / 写实 全身)",
|
||
"person_yolov8s-seg.pt": "person_yolov8s-seg.pt (2D / 写实 全身)",
|
||
"Personal CivitAI API key": "个人 CivitAI API 密钥",
|
||
"Perspective": "透视",
|
||
"Perspective Flip": "透视翻转",
|
||
"Perspective flip gamma": "透视翻转伽马值",
|
||
"Perspective flip phi": "透视翻转角度（垂直）",
|
||
"Perspective flip theta": "透视翻转角度（水平）",
|
||
"Perspective flip tv": "透视翻转消失点",
|
||
"Phone": "电话",
|
||
"Photographic": "Photographic (摄影)",
|
||
"PhotoMaker": "PhotoMaker (个性化人像图像)",
|
||
"Photopea popup warning": "Photopea 弹窗警告",
|
||
"Pick every n-th frame": "每 n 帧挑选 1 帧",
|
||
"Pick frames every n-th": "每 n 帧挑选 1 帧",
|
||
"Pick Subfolder and Model Version": "选择子目录与模型版本",
|
||
"Pics to Interpolate": "要插值的图像",
|
||
"pin_light": "小光源",
|
||
"pipeline": "管缐",
|
||
"Pipeline": "管缐",
|
||
"PitEyeDetailer-v1-seg.pt": "PitEyeDetailer-v1-seg.pt (2D / 写实 / 单眼)",
|
||
"PitEyeDetailer-v1b-seg.pt": "PitEyeDetailer-v1b-seg.pt (2D / 写实 / 单眼)",
|
||
"PitGlassesDetailer-v1-seg.pt": "PitGlassesDetailer-v1-seg.pt (眼镜)",
|
||
"PitHandDetailer-v1-seg.pt": "PitHandDetailer-v1-seg.pt (2D / 写实 / 手)",
|
||
"PitHandDetailer-v1b-seg.pt.pt": "PitHandDetailer-v1b-seg.pt (2D / 写实 / 手)",
|
||
"Pix2Pix img CFG schedule": "Pix2Pix 图像CFG排程",
|
||
"Pixel Art": "Pixel Art (像素艺术)",
|
||
"Pixel Composite Settings": "像素合成设定",
|
||
"Pixel Perfect": "完美像素",
|
||
"Pixel size": "像素尺寸",
|
||
"Pixelization": "像素化",
|
||
"Pixelize": "像素化",
|
||
"Pixels to expand": "拓展的画素数",
|
||
"Place added settings into an accordion": "将新增的设定置入一个手风琴容器中",
|
||
"Place options in main UI into an accordion": "将选项置入主介面的一个手风琴式的容器中",
|
||
"Place this at back of generated prompt (suffix)": "此框填写的提示词放在生成提示词的後面 (後缀)",
|
||
"Place this in front of generated prompt (prefix)": "此框填写的提示词放在生成提示词的前面 (前缀)",
|
||
"Plain text / URL / Custom format": "纯文本 / URL / 自订格式",
|
||
"Platform": "执行平台",
|
||
"Play notification sound after image generation": "完成图像生成後播放通知声音",
|
||
"Please add text prompts to generate masks": "请新增文本提示词以生成遮罩",
|
||
"Please always keep values in math functions above 0.": "请始终保证数学函式中的值大於 0",
|
||
"Please click": "请点击",
|
||
"Please enable the following settings to use controlnet from this script.": "请启用以下设定，以保证可以在此脚本中呼叫ControlNet。",
|
||
"Please press 'Refresh' to load selected content!": "请点击 \"刷新\" 按钮载入所选内容！",
|
||
"Please select a valid lightdiffusionflow or image file!": "请选择一个有效的 LightDiffusionFlow 或图像档案！",
|
||
"Please switch to 3D animation mode to view this section.": "请切换到 3D 动画模式来检视该部分",
|
||
"Please test on small images before actual upscale. Default params require denoise <= 0.6": "请在实际扩图前用小解析度图像进行测试, 预设参数需求降噪强度小於或等於0.6",
|
||
"Please use smaller tile size when got CUDA error: out of memory.": "当出现 CUDA error: out of memory 时，使用更小的分块尺寸",
|
||
"Please use smaller tile size when see CUDA error: out of memory.": "如果看到 CUDA 错误：out of memory ，请降低分块尺寸。",
|
||
"PLMS": "PLMS（不）",
|
||
"Plot": "图表",
|
||
"Plot the LoRA weight in all steps": "产生LoRA在每一个迭代步数的权重的图表",
|
||
"Plugin first": "扩展优先",
|
||
"PNG info": "PNG 图像资讯",
|
||
"PNG Info": "图像资讯",
|
||
"PNG info directory": "PNG 资讯目录",
|
||
"PNGINFO Beautify": "PNGINFO Beautify 美化",
|
||
"PNGs": "图像（PNG格式）",
|
||
"point1 x": "X 轴点 1",
|
||
"point1 y": "Y 轴点 1",
|
||
"point2 x": "X 轴点 2",
|
||
"point2 y": "Y 轴点 2",
|
||
"point3 x": "X轴点 3",
|
||
"point3 y": "Y 轴点 3",
|
||
"Pointillism": "Pointillism (点画派)",
|
||
"points_per_batch": "每批采样点",
|
||
"points_per_side": "每边采样点",
|
||
"Pokémon": "Pokémon (宝可梦)",
|
||
"polylines_sharp": "多边形算法 - 锐利",
|
||
"polylines_soft": "多边形算法 - 柔和",
|
||
"polynomial": "多项式（polynomial）",
|
||
"Polynomial Power": "多项式功率",
|
||
"Pooling Avg": "池化平均值",
|
||
"Pooling Max": "池化最大值",
|
||
"Poor man's outpainting": "效果稍差的向外绘製",
|
||
"Pop Art": "Pop Art (波普艺术)",
|
||
"Pose": "姿势",
|
||
"Pose style": "姿态样式",
|
||
"Position (center to edge)": "位置 (中心到边缘)",
|
||
"Position (left to right)": "位置 (从左到右)",
|
||
"Positioning the effect on the y-axis": "在 Y 轴定位效果",
|
||
"Positions": "位置",
|
||
"positive": "正向",
|
||
"Positive": "正向提示词",
|
||
"Positive \"filewords\" only": "仅使用正向「词彙」",
|
||
"Positive / Negative Prompts": "正向 / 反向提示词",
|
||
"Positive Filter": "Positive 过滤器",
|
||
"Positive prompt mode": "正向提示词模式",
|
||
"positive prompt to be appended to *all* prompts": "正向提示词会被新增到所有提示词中",
|
||
"Post Processing": "後期處理",
|
||
"Post-Inpainting (After swapping)": "後重绘 (变换後)",
|
||
"Post-Processing": "後處理",
|
||
"Post-Processing & Advanced Mask Options": "後期處理 & 进阶遮罩设定",
|
||
"Post-processing and mask settings for unit faces. Best result : checks all, use LDSR, use Codeformer": "适用於脸部单元的後期處理和遮罩设定。最好的结果: 检查所有设定，启用 LSDR，启用 Codeformer",
|
||
"Postprocess": "後期處理",
|
||
"Postprocess (latent)": "後期處理 (潜空间)",
|
||
"Postprocessing": "後處理",
|
||
"Postprocessing operation order": "後處理操作顺序",
|
||
"Pre-defined aspect ratio buttons (1:1, 4:3, 16:9, 9:16, 21:9)": "纵横比按钮预设 (输入格式: 1:1, 4:3, 16:9, 9:16, 21:9)",
|
||
"Pre-defined percentage buttons (75, 125, 150)": "百分比按钮预设 (输入格式: 75, 125, 150)",
|
||
"Pre-defined percentage display format": "百分比预设显示格式",
|
||
"pre-depth background removal": "pre-depth 背景消除",
|
||
"Pre-Inpainting (before swapping)": "预重绘 (变换前)",
|
||
"Pre-inpainting sends face to inpainting before swapping": "在变换前後發送图像到区域重绘进行重绘",
|
||
"Pre-Processing": "预處理",
|
||
"Pre-trained model, determines if aesthetic/non-aesthetic, does 5 different style recognition modes, and Waifu confirmation. Also has a tab with Batch processing.": "预先训练的模型，用於判断美学/非美学，进行五种不同样式的识别模式，以及 Waifu 确认。此外还有批次處理的标籤。",
|
||
"Precision": "精度",
|
||
"Precision for (attention:1.1) when editing the prompt with Ctrl+up/down": "通过 Ctrl+Up/Down 编辑形如 (attention:1.1) 词条的精度",
|
||
"Precision for <extra networks:0.9> when editing the prompt with Ctrl+up/down": "通过 Ctrl+Up/Down 编辑形如 <extra networks:0.9> 词条的精度",
|
||
"pred_iou_thresh": "预测滤波阈值",
|
||
"Predefined percentage buttons, applied to dimensions (75, 125, 150)": "预设的百分比按钮，套用於尺寸（75,125,150）",
|
||
"Predefined percentage display format": "预设百分比显示格式",
|
||
"predicted_iou_threshold": "预测交并比阈值",
|
||
"Preferred VAE": "偏好VAE",
|
||
"Preferred VAE: refresh": "首选 VAE: 刷新",
|
||
"Preferred weight": "首选权重",
|
||
"Prefix": "前缀",
|
||
"prefix + prefix + prompt + suffix": "prefix + prefix + prompt + suffix (前缀 + 前缀 + 提示词 + 後缀)",
|
||
"prefix AND prompt + suffix": "prefix AND prompt + suffix (前缀 AND 提示词 + 後缀)",
|
||
"Preload images at startup": "在启动时预载入图像",
|
||
"Preload images at startup for first tab": "在启动时为第一个页籤预载图像",
|
||
"prepare ebsynth": "预處理 Ebsynth",
|
||
"prepare environment": "准备环境",
|
||
"prepend": "放前面",
|
||
"Prepend": "新增到开头",
|
||
"Prepend additional tags": "将额外标籤前置",
|
||
"preprocess": "预處理",
|
||
"Preprocess": "预處理",
|
||
"Preprocess images": "图像预處理",
|
||
"Preprocessing steps": "预處理步骤",
|
||
"Preprocessor": "预處理器",
|
||
"Preprocessor Preview": "预處理器预览",
|
||
"Preprocessor resolution": "预處理器解析度",
|
||
"Preprocessor Resolution": "预處理器解析度",
|
||
"Prerequisites and Important Info:": "前提条件和重要资讯：",
|
||
"Preset": "预设",
|
||
"Preset Manager": "预设管理器",
|
||
"Preset Name": "预设名",
|
||
"Preset Utilities": "预设工具",
|
||
"Preset utility tool for ui. Offers compatibility with custom scripts. (to a limit)": "预设工具，用於 ui。提供与自定义脚本的兼容性。（有限制）",
|
||
"Preset Weights": "预设权重",
|
||
"Preset_Weights": "预设权重",
|
||
"Presets": "预设",
|
||
"Prespective flip — Low VRAM pseudo-3D mode:": "透视翻转 — 低显存(VRAM)伪3D模式:",
|
||
"Press enter to add new tag": "按下 Enter 键新增新提示词",
|
||
"Press enter to add tag": "输入回车新增新标籤",
|
||
"Pretrained VAE Name or Path": "预训练 VAE 名称或路径",
|
||
"Prev batch": "上一批",
|
||
"Prev page": "上一页",
|
||
"Prev Page": "上一页",
|
||
"Prevent Empty Spot": "防止空白区域",
|
||
"Prevent empty spots in grid (when set to autodetect)": "（启用自动侦测时）防止宫格图中出现空位",
|
||
"Prevent Stability-AI's ldm/sgm modules from printing noise to console.": "阻止 Stability-AI 的 ldm/sgm 模组向控制台列印垃圾资讯",
|
||
"Prevents overfit by clipping gradient norms. Default value is 0.0. Recommended value for Lora is 1.0": "通过裁剪梯度归一层防止过拟合。预设 0.0。推荐 Lora 使用 1.0 。",
|
||
"Preview": "预览",
|
||
"Preview annotator result": "预览预處理结果",
|
||
"Preview as Input": "预處理结果作为输入",
|
||
"Preview automatically when add/remove points": "新增/删除标记点时自动预览",
|
||
"Preview Image": "预览图像",
|
||
"Preview image negative prompt": "预览图反向提示词",
|
||
"Preview image prompt": "预览图提示词",
|
||
"Preview Image Selection": "预览图像选择",
|
||
"Preview mask": "预览遮罩",
|
||
"Preview motion only. Uses a static picture for init, and draw motion reference rectangle.": "仅预览运动效果。使用一张静态图像进行初始化，然後绘製运动参考矩形",
|
||
"Preview Segmentation": "预览分离结果",
|
||
"Preview segmentation image": "预览语义分割图像",
|
||
"Previous": "Previous (上一生成帧)",
|
||
"Previous Page": "前一页",
|
||
"Primary detection model (A)": "首要检测模型 (A)",
|
||
"Primary model": "模型 A",
|
||
"Primary model (A)": "主要模型（A）",
|
||
"Primary model (A): refresh": "模型 A: 刷新",
|
||
"Print": "输出",
|
||
"Print a list of Textual Inversion embeddings when loading model": "载入模型时在控制台列印 Textual Inversion embeddings 模型列表资讯",
|
||
"Print all deviations": "输出所有偏移量",
|
||
"print change": "列印变更",
|
||
"Print debug logs to the console": "在控制台显示除错讯息。",
|
||
"Print extra hypernetwork information to console.": "将额外的超网路资讯印到控制台。",
|
||
"Print image deletion messages to the console": "将图像删除讯息列印到控制台",
|
||
"Print prompts to console when generating with txt2img and img2img.": "在控制台列印文生图和图生图生成图像时使用的提示词",
|
||
"Print stack traces before exiting the program with ctrl+c.": "在使用 Ctrl + C 退出程序前列印堆叠追蹤资讯",
|
||
"Print warning logs to the console": "在控制台显示警告讯息",
|
||
"Prior Loss": "先前的损失",
|
||
"Prior Loss Target": "先前损失目标",
|
||
"Prior Loss Weight": "先前损失权重",
|
||
"Prior loss weight.": "先验损失权重",
|
||
"Process": "行程, 程序",
|
||
"Process & Save": "處理 & 储存",
|
||
"Process an image, use it as an input, repeat.": "處理一张图像，将其作为输入，并重复",
|
||
"Process Att-Map": "處理注意力图（Att-Map）",
|
||
"Process given file(s) under the input folder, seperate by comma": "指定在输入目录中要處理图像的档名 (使用逗号隔开)",
|
||
"Process Hires. fix": "處理高清修复",
|
||
"Process images in a directory on the same machine where the server is running.": "處理伺服器主机上的某一个目录中的图像。",
|
||
"Process Stage": "过程步骤",
|
||
"Process Text": "處理文本",
|
||
"Process type": "處理类型",
|
||
"processing |": "處理中 |",
|
||
"Produce an image that can be tiled.": "生成可用於平舖的图像",
|
||
"Progressbar and preview update period": "进度条/预览图更新周期",
|
||
"Progressbar/preview update period, in milliseconds": "进度条/预览图更新周期 (毫秒)",
|
||
"Project": "项目",
|
||
"Project directory": "工程目录（不可包含中文、下换缐和特殊符号）",
|
||
"project setting": "工程设定",
|
||
"project_dir not found": "工程目录未找到",
|
||
"Promot Textarea": "提示词文本区",
|
||
"prompt": "提示词",
|
||
"Prompt": "提示词",
|
||
"Prompt\n(Press Ctrl+Enter to generate, Alt+Enter to skip, Esc to interrupt)": "正向提示词 Prompt\n(按 Ctrl+Enter 开始生成，Alt+Enter 跳过当前图像，ESC 停止生成)",
|
||
"Prompt (press Ctrl+Enter or Alt+Enter to generate)": "提示词（按 Ctrl+Enter 或 Alt+Enter 产生）",
|
||
"prompt 1": "提示词①",
|
||
"prompt 2": "提示词②",
|
||
"prompt 3": "提示词③",
|
||
"prompt 4": "提示词④",
|
||
"prompt 5": "提示词⑤",
|
||
"Prompt attention parser": "提示词注意力解析器",
|
||
"Prompt blacklist, find and replace, for semi-private and public instances.": "提示黑名单，寻找并替换半私人和公共执行个体。",
|
||
"Prompt Changes": "提示词调整",
|
||
"Prompt compounder": "提示词混合",
|
||
"Prompt editing": "提示词编辑",
|
||
"Prompt fields": "提示词段",
|
||
"Prompt for face": "针对脸部的提示词",
|
||
"Prompt for Face": "脸部提示词",
|
||
"Prompt for hires fix pass.\nLeave empty to use the same prompt as in first pass.": "用於高分修复层的正向提示词\n留空以使用与第一层相同的提示词",
|
||
"Prompt for tokenization": "给标记化准备的提示词",
|
||
"Prompt for upscale (added to generation prompt)": "用於放大的正向提示词 (追加到生成提示词後)",
|
||
"Prompt Formatter": "提示词规范化",
|
||
"Prompt Gallery": "提示词画廊",
|
||
"Prompt Generator": "提示产生器",
|
||
"Prompt Magic": "提示词魔法",
|
||
"Prompt matrix": "提示词矩阵",
|
||
"Prompt mode": "提示词模式",
|
||
"Prompt Mode": "提示词模式",
|
||
"Prompt mode guide": "提示词模式指南",
|
||
"Prompt order": "提示词顺序",
|
||
"Prompt S/R": "提示词搜寻 / 替换",
|
||
"Prompt seperator": "提示词分隔符",
|
||
"Prompt seperator mode": "提示词分隔模式",
|
||
"Prompt template": "提示模板",
|
||
"Prompt template file": "提示词模版档案",
|
||
"Prompt template: refresh": "提示词模板: 刷新",
|
||
"Prompt to be visualized": "用於可视化的提示词",
|
||
"Prompt Translator": "提示词翻译器",
|
||
"prompt travel": "提示词变迁",
|
||
"Prompt Travel": "提示词变迁",
|
||
"Prompt word wrap length limit": "提示词换组长度限制",
|
||
"Prompt, will append to your t2i prompt": "追加提示词",
|
||
"prompt-bracket-checker": "提示括号检查器",
|
||
"Prompt-Ex": "提示词-Ex",
|
||
"Promptgen": "提示词生成器",
|
||
"prompting": "提示词",
|
||
"Prompts": "提示词",
|
||
"Prompts are stored in JSON format. If you've got an error, check it in a": "提示词以 JSON 格式存储。如果有错误，请在 ",
|
||
"Prompts are stored in JSON format. If you've got an error, check it in the validator,": "提示词以 JSON 格式储存。如有误，请前往校验器检查: ",
|
||
"Prompts are stored in JSON format. If you've got an error, check it in validator,": "提示词以 JSON 格式存储。如果您有错误，请在验证器中检查，",
|
||
"prompts for your animation in a JSON format. Use --neg words to add 'words' as negative prompt": "动画的提示词以 JSON 格式储存。使用 --neg 字段去新增反向提示词",
|
||
"Prompts from file or textbox": "从文字方块或档案载入提示词",
|
||
"Prompts from png info will be appended to prompts set in ui.": "从 PNG 资讯中提取的提示词将被附加到 UI 中设定的提示词集。",
|
||
"Prompts negative": "反向提示词",
|
||
"Prompts positive": "正向提示词",
|
||
"Provide Simplified Chinese localization for the WebUI": "提供简体中文本地化翻译",
|
||
"Provider": "提供方",
|
||
"Provides a tab to display equirectangular images in interactive 3d-view.": "提供一个分页以显示互动式 3D 视图中的等矩形图像。",
|
||
"Provides an interface to browse created images in the web browser.": "在网页浏览器裡提供一个浏览已产生的图像使用者介面",
|
||
"Provides connection to Discord RPC, showing a fancy table in the user profile.": "提供与 Discord RPC 的连接，在使用者资料页面显示漂亮的表格。",
|
||
"Proxy": "代理",
|
||
"Proxy to use for fetching models and model data. Format: http://127.0.0.1:port": "用於获取模型和模型数据的代理 (格式: http://127.0.0.1:端口号)",
|
||
"prune": "裁剪",
|
||
"Pruning Methods": "模型修剪",
|
||
"pt_BR Localization": "巴西葡萄牙语本地化语言包",
|
||
"Pure Noise": "纯噪点",
|
||
"Push File To 🤗": "将档案推送到 🤗",
|
||
"Push File to 🤗 Hugging Face": "将档案推送到 🤗 Hugging Face",
|
||
"Push Folder To 🤗": "将目录推送到 🤗",
|
||
"Push Folder to 🤗 Hugging Face": "将目录推送到 🤗 Hugging Face",
|
||
"pussyV2.pt": "pussyV2.pt (2D / 写实 生殖器 女)",
|
||
"Put variable parts at start of prompt": "把可变部分放在提示词的开头",
|
||
"Put weight sets. float number x 25": "输入权重，共 25 个浮点数，逗号分隔",
|
||
"quad": "二阶",
|
||
"Quality": "品质",
|
||
"Quality for saved jpeg images": "储存的 JPEG 图像的品质",
|
||
"Quality Gate": "品质把关",
|
||
"Quantize": "量化",
|
||
"query": "查询",
|
||
"questionable": "强烈性暗示/可疑内容（Questionable）",
|
||
"Queue front": "新增到伫列前",
|
||
"queue:": "排队中: ",
|
||
"Queued": "已排队",
|
||
"Queued At": "伫列于",
|
||
"quick": "快速",
|
||
"Quick": "快速设定",
|
||
"Quick batch": "快速批處理",
|
||
"Quick Guide": "快速指引",
|
||
"Quick Save": "快速储存",
|
||
"Quick start": "快速开始（Quick start）",
|
||
"quick-css": "快速 CSS",
|
||
"Quicksettings list": "快捷设定列表",
|
||
"Quicksettings position": "快速设定位置",
|
||
"R-ESRGAN 4x+": "R-ESRGAN 4x+ (通用 锐度最高，细节更多)",
|
||
"R-ESRGAN 4x+ Anime6B": "R-ESRGAN 4x+ Anime6B (2D 轻微的羽化/模糊處理)",
|
||
"R-ESRGAN AnimeVideo": "R-ESRGAN AnimeVideo (2D 针对影片放大處理，模糊程度更高)",
|
||
"R-ESRGAN General 4xV3": "R-ESRGAN General 4xV3 (细节上更倾向於4X+ 模糊程度上也比Anime6B大一点)",
|
||
"R-ESRGAN General WDN 4xV3": "R-ESRGAN General WDN 4xV3 (2D 适用於厚塗插画)",
|
||
"radio-buttons": "单选按钮",
|
||
"random": "随机",
|
||
"Random choices": "随机选择",
|
||
"Random Jitter": "随机抖动",
|
||
"Random Mode": "随机模式",
|
||
"Random number generator source.": "随机数生成来源",
|
||
"Random number generator source. Changes seeds drastically. Use CPU to produce the same picture across different vidocard vendors.": "随机数的生成来源。大幅度改变种子。使用CPU来在不同型号显卡间产生相同的图像",
|
||
"Random patches by D8ahazard. Auto-load config YAML files for v2, 2.1 models; patch latent-diffusion to fix attention on 2.1 models (black boxes without no-half), whatever else I come up with.": "D8ahazard 的随机修补程式。自动载入 v2、2.1 模型的 YAML 组态档案；修补 2.1 模型的潜在变数扩散以修复注意力（没有 no-half 的黑盒子），以及其他任何我想到的。",
|
||
"Random prompt": "随机提示词",
|
||
"Random seed for ToMe partition": "Token 合併分区的随机数种子",
|
||
"Randomize": "随机化",
|
||
"Randomize CFG": "随机引导系数(CFG)",
|
||
"Randomize CFG Scale": "随机化 提示词引导系数(CFG Scale)",
|
||
"Randomize CLIP skip": "随机化 CLIP 终止层数",
|
||
"Randomize For Each Iteration": "随机化每次迭代生成",
|
||
"Randomize Height": "随机化 高度",
|
||
"Randomize Highres. Denoising Strength": "随机化 高解析度修复的重绘幅度(Denoising)",
|
||
"Randomize Highres. Height": "随机化 高解析度修复的第一遍的高度",
|
||
"Randomize Highres. percentage": "随机化 启用高解析度修复的机率",
|
||
"Randomize Highres. Width": "随机化 高解析度修复的第一遍的宽度",
|
||
"Randomize Sampler": "随机化採样方法",
|
||
"Randomize Seed": "随机变异种子(Seed)",
|
||
"Randomize Steps": "随机化 採样迭代步数",
|
||
"Randomize Style": "随机样式",
|
||
"Randomize Width": "随机化 宽度",
|
||
"Randomly decide to flip images horizontally.": "随机决定是否水平翻转图像。",
|
||
"Randomly display the pictures of the artist's or artistic genres typical style, more pictures of this artist or genre is displayed after selecting. So you don't have to worry about how hard it is to choose the right style of art when you create.": "随机显示一位艺术家或某艺术流派的图像，选择後会显示更多该艺术家或艺术流派的图像。所以你不用担心在创作时难以选择出想要的艺术风格",
|
||
"Randomly selects a keyword from the prompt and adds emphasis to it. Try this with Fixed Seed enabled.": "随机强调提示词中的一个关键词，尝试前要启用固定随机种子",
|
||
"Randomness": "随机度",
|
||
"range": "範围",
|
||
"Range": "範围",
|
||
"Range of stepped values (min, max, step)": "含步数的随机範围（最小，最大，步数）",
|
||
"ranking": "评等",
|
||
"ranking filter": "以评等筛选",
|
||
"Ranking filter": "评分过滤器",
|
||
"Rate strength": "速率强度",
|
||
"rating": "评分",
|
||
"Rating": "评分",
|
||
"Rating confidences": "评分置信度",
|
||
"Rating confidents": "评分置信度",
|
||
"Ratings and included tags": "评分并包含标籤",
|
||
"Raw percentage (50%, 150%)": "原始百分比（50％，150％）",
|
||
"Re-enable the bug that trained the tenc embedding layer for LoRA.": "重新启用 LoRA 训练文本编码器 (tenc) 嵌入层的错误。",
|
||
"Re-run your combinatorial batch this many times with a different seed each time.": "这个选项表示用不同的种子重新执行组合产生的批次数据。在每次执行中，种子值都会改变，这样可以产生不同的随机顺序或排列组合。",
|
||
"Re-run your combinatorial batch this many times with a different seed each time.\nThe maximum number of outputs = Combinatorial batches * Batch size * Batch count.\nTo specify the maximum number of prompt combinations use 'Batch count'/'Batch size' options.": "重複做多批次组合生成，每次用不同的随机种子\n最大输出数为 组合批次 * 批量（Batch size） * 批次（Batch count）\n在 “批次” 和 “批量” 處指定提示词组合的最大数量",
|
||
"Read Caption from Selected Image": "从选择的图像中读取描述",
|
||
"Read generation parameters from prompt or last generation if prompt is empty into user interface.": "从提示词中读取生成参数，如果提示词为空，则读取上一次的生成参数到使用者介面",
|
||
"read metadata": "读取元数据",
|
||
"Read metadata from selected checkpoints": "从所选模型中读取元数据",
|
||
"Read parameters (prompt, etc...) from txt2img tab when making previews": "进行预览时，从文生图页籤中读取参数（提示词等）",
|
||
"Read prompts from text boxes": "读取文本框中的提示词",
|
||
"Read tabular commands": "读取 tabular 指令",
|
||
"Read tags from text files": "从文本档案中读取提示词",
|
||
"read_last_image": "载入上次图像",
|
||
"read_last_settings": "载入上次设定",
|
||
"Real Estate": "Real Estate (房地产摄影)",
|
||
"Reapply ranking after moving files": "移动档案後重新评分",
|
||
"Rebuild exif cache": "重建 EXIF 缓存",
|
||
"Rebuild Index": "重建页面",
|
||
"Recipe": "配方",
|
||
"Recolor": "Recolor (重上色)",
|
||
"recolor_intensity": "recolor_intensity (重上色 - 调节 “图像强度” 以去色)",
|
||
"recolor_luminance": "recolor_luminance (重上色 - 调节 “图像亮度” 以去色)",
|
||
"recombine ebsynth": "重组 Ebsynth",
|
||
"Recommend enabling the following settings.": "建议启用以下设定：",
|
||
"Recommended inference settings": "推荐生成设定",
|
||
"Recommended settings: Sampling Steps: 80-100, Sampler: Euler a, Denoising strength: 0.8": "推荐设定：取样叠代步数：80-100，取样器：Euler a，重绘幅度：0.8",
|
||
"Recommended settings: Use from inpaint tab, inpaint at full res ON, denoise <0.5": "推荐设定：於区域重绘页籤使用，开启全解析度区域重绘，重绘幅度(Denoising) < 0.5",
|
||
"Recommended to set tile sizes as large as possible before got CUDA error: out of memory.": "建议在得到 CUDA error: out of memory 报错前尽可能大的设定编码器分块大小",
|
||
"Reconstruct prompt from existing image and put it into the prompt field.": "从现有的图像中重构出提示词，并将其放入提示词的输入文字方块",
|
||
"Reconstruction loss weight": "重建损失权重",
|
||
"record": "记录",
|
||
"Record accessable images directories": "记忆可访问的图像目录",
|
||
"Recreate hash for existing files": "为已存在档案重建杂凑",
|
||
"Rectangular": "矩形",
|
||
"Recursively search for wildcards": "递迴检索万用字元",
|
||
"red-cyan-anaglyph": "红蓝浮雕效果",
|
||
"red/green/blue": "red(红)/green(绿)/blue(蓝)",
|
||
"Redo generation": "重做生成",
|
||
"Redraw options:": "重绘选项：",
|
||
"Ref image (for conviently locate regions)": "参考图（用於方便定位区域）",
|
||
"Reference": "Reference (参考)",
|
||
"Reference Control (enabled with image below)": "通过参考图像控制 (仅当下方有输入图时启用)",
|
||
"Reference Control Mode": "参考控制模式",
|
||
"Reference Control Weight": "参考控制权重",
|
||
"Reference Image": "参考图像",
|
||
"Reference Image Resize Mode": "参考图像缩放模式",
|
||
"Reference is an image. First face will be extracted.": "需要一张图像进行参考。提取第一张图的脸部",
|
||
"Reference source face : start from 0": "参考脸部源: 从 0 开始",
|
||
"Reference Type for Reference-Only": "仅参考模式的参考类型",
|
||
"Reference-Only": "Reference-Only (仅参考)",
|
||
"Reference-Only Control (enabled only when a reference image below is present)": "Reference-Only Control（仅当下方有参考图时启用）",
|
||
"reference_adain": "reference_adain (仅参考输入图 - 自适应实例规範)",
|
||
"reference_adain+attn": "reference_adain+attn (仅参考输入图 - 自适应实例规範 + 关联)",
|
||
"reference_only": "reference_only (仅参考输入图)",
|
||
"Refiner": "精炼（Refiner）",
|
||
"Refiner checkpoint": "Refiner 模型",
|
||
"Refiner Denosing Fraction:": "Refiner 重绘切换时机:",
|
||
"Refiner model": "Refiner 模型",
|
||
"Refiner Model": "Refiner 模型",
|
||
"Refiner Model ID": "Refiner 模型 ID",
|
||
"Refiner options": "Refiner 选项",
|
||
"Refiner switch at": "Refiner 切换时机",
|
||
"Reflect image around border": "从边缘镜像图像内容",
|
||
"reflection": "反射",
|
||
"reflection will attempt to approximate the image and tile/repeat pixels": "反射模式下会尝试近似图像并平铺/重複像素",
|
||
"refresh": "重新整理",
|
||
"Refresh": "重新整理",
|
||
"Refresh all checkpoint preview info": "刷新所有模型预览资讯",
|
||
"Refresh Civitai Helper": "刷新 Civitai 助手",
|
||
"Refresh Civitai Helper's additional buttons": "刷新 Civitai 助手的附加按钮",
|
||
"Refresh Civitai Helper's model card buttons": "刷新 Civitai 助手 的模型卡片按钮",
|
||
"Refresh data": "刷新数据",
|
||
"Refresh Embeddings": "重新整理多个嵌入",
|
||
"Refresh extension list": "刷新扩展列表",
|
||
"Refresh internal temp files": "刷新内部临时档案",
|
||
"Refresh models": "重新整理模型列表",
|
||
"Refresh openOutpaint": "重新整理开源图像延伸模组",
|
||
"Refresh page": "刷新页面",
|
||
"Refresh Style": "刷新样式",
|
||
"Refresh TAC temp files": "刷新 TAC 缓存档案",
|
||
"refresh textual inversion templates": "刷新嵌入式模板",
|
||
"refresh VAE": "刷新 VAE",
|
||
"Refresh wildcards": "重新整理万用字元",
|
||
"Regenerate": "重新生成",
|
||
"regex - e.g. ^(?!.*Hires).*$": "正则表达式 - 如 ^(?!.*Hires).*$",
|
||
"Region": "区域数",
|
||
"Region 1": "区域 1",
|
||
"Region 2": "区域 2",
|
||
"Region 3": "区域 3",
|
||
"Region 4": "区域 4",
|
||
"Region 5": "区域 5",
|
||
"Region 6": "区域 6",
|
||
"Region 7": "区域 7",
|
||
"Region 8": "区域 8",
|
||
"Region Prompt Control": "分区提示词控制",
|
||
"Regions": "区域",
|
||
"Regular expression pattern for blocking terms out of the generated prompt. Applied case-insensitively. For instance, to block both \"purple\" and \"interdimensional\", you could use the pattern \"purple|interdimensional\".": "用於排除提示词语的表达式。忽略大小写。例如，要封锁 'purple' 和 'interdimensional'，可以使用 'purple | interdimensional'",
|
||
"Regular expression; if weights's name matches it, the weights is not written to the resulting checkpoint. Use ^model_ema to discard EMA weights.": "正则表达式；如果 weights 的名称与其匹配，则不将 weights 写入得到的检查点。使用 ^model_ema 丢弃 EMA weights。",
|
||
"Related to original file": "与原始档案相关",
|
||
"Related to output file": "与输出档案相关",
|
||
"Relative": "相对",
|
||
"Release notes": "發布说明",
|
||
"Reload Cache List": "重载缓存列表",
|
||
"Reload checkpoint": "刷新模型列表",
|
||
"Reload Checkpoints": "重新载入模型",
|
||
"Reload custom script bodies (No ui updates, No restart)": "重新载入自订指令码主体（使用者介面不刷新，不重新启动）",
|
||
"reload hypernetworks": "重载超网络",
|
||
"Reload model back to VRAM": "重新载入模型到显存",
|
||
"Reload Presets": "重载预设",
|
||
"Reload scripts": "重载脚本",
|
||
"Reload settings": "重新载入设定",
|
||
"Reload Tags": "重载标籤",
|
||
"Reload the last SD checkpoint back into VRAM": "重新载入上一个模型权重存档点至 VRAM",
|
||
"Reload UI": "重新载入 UI",
|
||
"Reload UI needed to apply": "需重载前端",
|
||
"Reload UI scripts when using Reload UI option": "当使用 “重载 UI” 选项时重新载入 UI 脚本",
|
||
"Reload/Save Settings (config.json)": "重新载入/储存设定 (config.json)",
|
||
"Reloading...": "正在重新载入...",
|
||
"Reloat List": "重新载入列表",
|
||
"remake dimension": "重制维度",
|
||
"Rembg Model": "背景移除模型",
|
||
"Remember this choice?": "记住这个选择？",
|
||
"Remote": "远端",
|
||
"Remove": "移除",
|
||
"Remove all point prompts": "移除所有标记点",
|
||
"Remove Auto Trans": "移除自动翻译的文字",
|
||
"Remove background": "移除背景",
|
||
"Remove Background %": "背景排除（%）",
|
||
"Remove background image": "移除背景图像",
|
||
"Remove batch": "移除批次选择",
|
||
"Remove cfg": "移除提示词引导系数 (CFG)",
|
||
"Remove checkboxes": "移除複选框",
|
||
"Remove dimensions": "移除解析度",
|
||
"Remove duplicate prompts": "删除重複提示词",
|
||
"Remove duplicate tags": "移除重複标籤",
|
||
"Remove duplicated tag": "删除重複标籤",
|
||
"Remove empty prompts": "删除空提示词",
|
||
"Remove from saved directories": "从已储存的目录移除",
|
||
"Remove head": "移除头帧",
|
||
"Remove hires_fix": "移除高解析度修复 (Hires. fix)",
|
||
"Remove Image": "移除图像",
|
||
"Remove inpaint": "移除区域重绘",
|
||
"Remove last": "删除最後一条",
|
||
"Remove motion module from any memory": "从记忆体卸载动画模型",
|
||
"Remove Near %": "近景排除（%）",
|
||
"Remove occluded edges": "移除遮挡边缘",
|
||
"Remove override_settings": "移除覆盖设定",
|
||
"Remove results with the \"animated\" tag": "删除带有 \"animated\" (动图)标籤的结果",
|
||
"Remove sampler": "移除採样方法",
|
||
"Remove scripts": "移除脚本",
|
||
"Remove sd_model_checkpoint": "移除 stable diffusion checkpoint 模型",
|
||
"Remove sd_vae": "移除 SD VAE (外挂 VAE 模型)",
|
||
"Remove seed": "移除随机数种子",
|
||
"Remove selected": "移除当前选择的图像",
|
||
"Remove selected tags": "移除选中标籤",
|
||
"Remove selection [Delete]": "移除选择 [删除]",
|
||
"Remove tail": "移除尾帧",
|
||
"Remove this model": "移除此模型",
|
||
"Remove token_merging_ratio": "移除 Token 合併比率",
|
||
"remove_model_button": "移除模型按钮",
|
||
"Removes backgrounds from pictures.": "从图像移除背景。",
|
||
"renaissance": "renaissance (文艺复兴)",
|
||
"Renaissance": "Renaissance (文艺复兴)",
|
||
"Rename images": "重新命名图像",
|
||
"Rename keyframes.": "重新命名关键帧。",
|
||
"Rename New": "重新命名",
|
||
"Rename this model": "重新命名此模型",
|
||
"rename_model_button": "重新命名模型按钮",
|
||
"Renew Page": "刷新页面",
|
||
"Renoise kernel size": "重铺噪点大小",
|
||
"Renoise strength": "重铺噪点强度",
|
||
"Repeats": "重複",
|
||
"repeats the edge of the pixels, and extends them. Animations with quick motion may yield lines where this border function was attempting to populate pixels into the empty space created.": "重複并延长像素的边缘。快速运动镜头类型的动画可能会产生缐条，边界函式会试图将像素填充到建立的空隙中",
|
||
"Repetition Penalty": "重複惩罚",
|
||
"Replace": "取代",
|
||
"replace": "取代",
|
||
"Replace '_' with ' '(Does not affect the function to add tokens using add_token.txt.)": "用空格取代下劃缐（不影响使用 add_token.txt 新增 Token 的功能）",
|
||
"Replace Class with Subject in Caption": "在描述中将类别取代为主题",
|
||
"Replace new-line character with comma": "用逗号取代换行符",
|
||
"Replace Old Metadata Formats*": "*取代旧版元数据格式*",
|
||
"Replace or save the selected component.": "取代或储存所选组件",
|
||
"Replace order": "取代顺序",
|
||
"Replace order (replace mode)": "取代顺序 (取代模式)",
|
||
"Replace preview": "替换预览",
|
||
"replace preview": "取代预览",
|
||
"replace preview image with currently selected in gallery": "用当前网页输出中选中的图像取代预览图像",
|
||
"Replace spaces with a comma and a space": "用逗号', '取代空格",
|
||
"Replace Text": "取代文本",
|
||
"Replace underscore in tag with whitespace": "将标记内下横缐替换成空格",
|
||
"Replace underscores with spaces": "用空格取代下劃缐'_'",
|
||
"Replace underscores with spaces on insertion": "插入时将下横缐替换成空格",
|
||
"replace_preview_button": "取代预览图像按钮",
|
||
"Replaces NSFW images with black.": "用黑色替换 NSFW 图像。",
|
||
"replicate": "複製",
|
||
"Report a bug": "回报错误",
|
||
"Request browser notifications": "请求浏览器通知",
|
||
"Requires the": "需要安装 ",
|
||
"reroll": "回滚",
|
||
"Reroll blank frames": "回滚空白帧",
|
||
"Reroll patience": "回滚最大次数",
|
||
"Resblock": "残差块（用於残差神经网络 ResNet）",
|
||
"Rescale Cfg Phi": "重缩放 CFG Phi插值",
|
||
"Reserved: total amout of video memory allocated by the Torch library ": "预留：Torch 库分配的显存总量",
|
||
"reset": "重设",
|
||
"Reset": "重设",
|
||
"Reset Aspect Ratio": "重设纵横比",
|
||
"Reset CLIP ids": "重设 CLIP ID",
|
||
"reset current": "重设为当前",
|
||
"reset default": "重设为预设",
|
||
"Reset default (Reload UI needed to apply)": "重设为预设值（需重载UI）",
|
||
"Reset mixer": "重设合併设定",
|
||
"Reset recipe text area": "重设配方文本区域",
|
||
"Reset Tile Size": "重设分块大小",
|
||
"Reset vars": "重设变数(vars)",
|
||
"Reset Zoom": "重设缩放",
|
||
"Reset zoom and canvas position": "重设缩放和画布方位",
|
||
"Reset zoom and canvas positon": "重设缩放倍数和画布位置",
|
||
"resizable": "可缩放",
|
||
"resize": "缩放",
|
||
"Resize": "缩放比例",
|
||
"Resize and fill": "填充",
|
||
"Resize and Fill": "调整大小并填充",
|
||
"Resize by": "按比例调整大小",
|
||
"Resize crops to 512x512": "缩放裁剪至 512x512",
|
||
"Resize height to": "将高度调整至",
|
||
"Resize image to target resolution. Unless height and width match, you will get incorrect aspect ratio.": "将图像大小调整为目标解析度。除非高度和宽度符合，否则你将获得不正确的纵横比",
|
||
"Resize mode": "缩放模式",
|
||
"Resize Mode": "缩放模式",
|
||
"Resize mode -": "缩放模式",
|
||
"Resize result back to original dimensions": "将结果调整回原始尺寸",
|
||
"Resize seed from height": "高度（缩放种子）",
|
||
"Resize seed from width": "宽度（缩放种子）",
|
||
"Resize the image so that entirety of image is inside target resolution. Fill empty space with image's colors.": "调整图像大小，使整个图像在目标解析度内。用图像的颜色填充空白区域",
|
||
"Resize the image so that entirety of target resolution is filled with the image. Crop parts that stick out.": "调整图像大小，使整个目标解析度都被图像填充。裁剪多出来的部分",
|
||
"Resize to": "调整大小至",
|
||
"Resize width to": "将宽度调整至",
|
||
"resize: from": "调整大小: 来源",
|
||
"resize_mode": "缩放模式",
|
||
"Resizes image to this height. If 0, height is inferred from either of two nearby sliders.": "将图像调整到此高度。如果为0，则高度会从两个附近的滑块之一推断。",
|
||
"Resizes image to this width. If 0, width is inferred from either of two nearby sliders.": "将图像调整到此宽度。如果为0，则宽度会从两个附近的滑块之一推断。",
|
||
"Resizing objective": "调整大小目标",
|
||
"Resolution": "解析度",
|
||
"Resolution:": "解析度:",
|
||
"Resolutions:": "解析度:",
|
||
"Resources": "其他资料",
|
||
"Restart": "Restart（推）",
|
||
"Restart debug": "重启侦错",
|
||
"Restart Gradio and Refresh components (Custom Scripts, ui.py, js and css only)": "重启 Gradio 并刷新组件（仅限自订脚本、ui.py、js 和 css）",
|
||
"Restart server": "重启伺服器",
|
||
"Restart UI": "重载前端",
|
||
"Restore Checkpoint": "还原模型",
|
||
"Restore Checkpoint after process": "完成後恢复开始前选择的模型(ckpt)",
|
||
"restore config state file": "恢复组态状态档案",
|
||
"Restore defaults": "恢复预设",
|
||
"Restore Face": "脸部修复",
|
||
"Restore faces": "脸部修复",
|
||
"Restore Faces": "脸部修复",
|
||
"Restore faces after ADetailer": "在 After Detailer 之後修复脸部",
|
||
"Restore faces after ADetailer 2nd": "在 After Detailer 之後修复脸部",
|
||
"Restore faces after ADetailer 3rd": "在 After Detailer 之後修复脸部",
|
||
"Restore faces after ADetailer 4th": "在 After Detailer 之後修复脸部",
|
||
"Restore faces after ADetailer 5th": "在 After Detailer 之後修复脸部",
|
||
"Restore faces after ADetailer 6th": "在 After Detailer 之後修复脸部",
|
||
"Restore faces after ADetailer 7th": "在 After Detailer 之後修复脸部",
|
||
"Restore faces after ADetailer 8th": "在 After Detailer 之後修复脸部",
|
||
"Restore faces after ADetailer 9th": "在 After Detailer 之後修复脸部",
|
||
"Restore faces after ADetailer 10th": "在 After Detailer 之後修复脸部",
|
||
"Restore Faces, Tiling & more": "恢复脸部、平铺和更多功能",
|
||
"Restore Last Scene": "恢复上次场景",
|
||
"Restore low quality faces using GFPGAN neural network": "使用 GFPGAN 神经网路修复低品质脸部",
|
||
"Restore progress": "恢复程序",
|
||
"Restore Selected Config": "恢复所选组态",
|
||
"Restore settings after rendering a job": "生成任务结束後恢复设定",
|
||
"Restore settings to default": "恢复至预设设定",
|
||
"Restore system defaults": "恢复系统预设",
|
||
"Restore VAE": "还原 VAE",
|
||
"Restore visibility": "脸部修复强度",
|
||
"restore_faces": "脸部修复",
|
||
"Result = \"A, B, C, X, Y\" (add X and Y to the end (default))": "结果 = \"A, B, C, X, Y\" （将 X 和 Y 新增至末尾(预设)）",
|
||
"Result = \"X, C, E\" (A->\"\", B->X, D->\"\")": "结果 = \"X, C, E\" (A->\"\", B->X, D->\"\")",
|
||
"Result = \"X, Y, A, B, C\" (add X and Y to the beginning (\"Prepend additional tags\" checked))": "结果 = \"X, Y, A, B, C\" （将 X 和 Y 新增至开头(请勾选“将 tags 新增至开头”)）",
|
||
"Result = \"Y, Y, X, C\" (B->X, A->Y)": "结果 = \"Y, Y, X, C\" (B->X, A->Y)",
|
||
"Result = A": "结果 = A",
|
||
"Result = A * (1 - M) + B * M": "结果 = A * (1 - M) + B * M",
|
||
"Result = A + (B - C) * M": "结果 = A + (B - C) * M",
|
||
"Results": "结果",
|
||
"Resume & Run from file": "继续执行并从档案执行",
|
||
"Resume Animation": "继续动画",
|
||
"Resume from timestring": "从时间字串继续执行",
|
||
"Resume timestring": "从时间字串继续执行",
|
||
"Retouch": "修复程度",
|
||
"Retro Arcade": "Retro Arcade (复古街机)",
|
||
"Retro Game": "Retro Game (复古遊戏)",
|
||
"Return image with chosen live preview method on interrupt": "当生成过程中断时，通过所选的实时预览模式提供结果图像",
|
||
"Return mask": "回送遮罩",
|
||
"Reuse original image": "复用原图",
|
||
"Reuse seed from last generation, mostly useful if it was randomed": "重用上一次使用的随机种子，如果想要固定结果就会很有用",
|
||
"Reuse seed from last generation, mostly useful if it was randomized": "使用上一次生成所用的随机数种子，用於复现结果",
|
||
"Reverse": "反转",
|
||
"Reverse model sort order": "反向排序",
|
||
"Revision": "Revision (图像提示词)",
|
||
"revision_clipvision": "revision_clipvision (CLIP 整合嵌入图像提示 - 作为补充)",
|
||
"revision_ignore_prompt": "revision_ignore_prompt (CLIP 整合嵌入图像提示 - 忽略原有提示词)",
|
||
"rgb": "RGB",
|
||
"RGB to BGR": "RGB 转 BGR",
|
||
"rho": "rho (噪点密度)",
|
||
"RIFE v4.6 and FILM.": "RIFE v4.6 和 FILM.",
|
||
"right": "右",
|
||
"Right click generate forever menu": "右键单击开启无限生成选单",
|
||
"right-left": "右 - 左",
|
||
"roll canvas clockwise/anticlockwise": "顺时针/逆时针滚动画布",
|
||
"Roll Channels": "三原色频道轮替",
|
||
"Roll three": "抽三位出来",
|
||
"Rolling factor": "梯度放大倍数",
|
||
"romanticism": "romanticism (浪漫主义)",
|
||
"rotate canvas clockwise/anticlockwise in degrees per frame": "以每帧多少度数顺时针/逆时针旋转画布",
|
||
"Rotate images (clockwise)": "旋转图像 (顺时针)",
|
||
"Rotation 3D X": "3D 旋转 X",
|
||
"Rotation 3D Y": "3D 旋转 Y",
|
||
"Rotation 3D Z": "3D 旋转 Z",
|
||
"Round": "轮数",
|
||
"RPG Fantasy Game": "RPG Fantasy Game (角色扮演奇幻遊戏)",
|
||
"ru_RU Localization": "俄语本地化语言包",
|
||
"run": "执行",
|
||
"Run": "执行",
|
||
"Run benchmark": "执行效能评测",
|
||
"Run Cleaner": "执行清理器",
|
||
"run command": "执行指令",
|
||
"Run ControlNet Inpaint": "执行 ControlNet 重绘",
|
||
"run extensions installers": "执行扩展安装程序",
|
||
"run from a list of setting .txt files. Upload them to the box on the right (visible when enabled)": "从TXT设定档案列表载入。上传它们到右侧框内 (启用後可见)",
|
||
"Run from Settings file": "从设定档执行",
|
||
"Run Inpainting": "执行重绘",
|
||
"Run Inpainting on offline network (Models not auto-downloaded)": "脱机执行重绘 (不自动下载模型)",
|
||
"Run Merge": "开始合併",
|
||
"Run on incomplete": "中断後仍然执行",
|
||
"Run Padding": "执行填充",
|
||
"Run preprocessor": "执行预處理",
|
||
"Run Python code. Advanced user only. Must run program with --allow-code for this to work": "执行 Python 程式码。仅限老手使用。必须以 --allow-code 来开启程序，才能使其执行",
|
||
"Run Rand": "开始执行随机",
|
||
"Run Segment Anything": "执行 Segment Anything",
|
||
"Run Segment Anything on CPU": "用 CPU 执行 Segment Anything",
|
||
"Run settings": "执行设定",
|
||
"Run: Sampler, Width, Height, tiling, resize seed.": "执行参数： 採样方法，宽度，高度，平铺图，种子大小调整",
|
||
"Run: seed, subseed, subseed strength.": "执行参数：第二种子，第二种子强度",
|
||
"running benchmark may take a while. extensive tests may result in gpu out-of-memory conditions.": "执行基准测试需要花费大量时间。大量测试可能会导致 GPU 显存溢出。",
|
||
"Running ebsynth.(on your self)": "执行 Ebsynth。（自行操作）",
|
||
"Runs txt2img, img2img, highres-fix at increasing dimensions and batch sizes until OOM, and outputs data to graph.": "执行递增的图像尺寸与批次数量文生图、图生图以及高解析修复直到将记忆体耗尽，并输出资料图表。",
|
||
"Russian localization": "俄语本地化",
|
||
"SAG Mask Threshold": "SAG 遮罩阈值",
|
||
"SAM Model": "SAM 模型",
|
||
"SAM requires an input image. Please upload an image first.": "SAM 需要你先上传一张图像。",
|
||
"Same Gender": "相同性别",
|
||
"same to Strength": "与强度相同",
|
||
"Sample Batch Size": "样本批次大小",
|
||
"Sample CFG Scale": "样本CFG比例",
|
||
"Sample extension. Allows you to use __name__ syntax in your prompt to get a random line from a file named name.txt in the wildcards directory. Also see Dynamic Prompts for similar functionality.": "扩展範例。允许你在提示词中使用 __name__ 语法时，会从 wildcards 目录中一个名为 name.txt 的档案中随机获取一行作为输入。动态提示词扩展也有类似功能",
|
||
"Sample guidance scale": "样本的指导尺度(guidance scale) - 类似基准 CFG scale 的概念",
|
||
"Sample Height": "样本高度",
|
||
"Sample Image Generation": "生成样本图像",
|
||
"Sample Image Negative Prompt": "样本图像的反向提示词",
|
||
"Sample Image Prompt": "样本图像提示词",
|
||
"Sample Negative Prompt": "样本反向提示词",
|
||
"Sample Prompt": "样本提示词",
|
||
"Sample Prompt File": "样本提示档案",
|
||
"Sample Prompt Template File": "样本提示词範本档案",
|
||
"Sample Prompts": "样本提示词",
|
||
"Sample Seed": "样本种子",
|
||
"Sample Steps": "样本步数",
|
||
"Sample steps": "样本迭代步数",
|
||
"Sample Width": "样本宽度",
|
||
"sampler": "取样器",
|
||
"Sampler": "取样器",
|
||
"Sampler options": "採样器选项",
|
||
"Sampler parameters": "取样器参数",
|
||
"Sampler schedule": "取样器排程",
|
||
"Sampler Settings": "採样方法设定",
|
||
"Sampler:": "採样方法: ",
|
||
"Sampling method": "取样方法",
|
||
"Sampling method -": "採样方法（sampler）-",
|
||
"Sampling method webui": "webui 採样方法",
|
||
"Sampling settings": "採样方法设定",
|
||
"Sampling steps": "取样步骤",
|
||
"Sampling Steps": "採样叠代步数",
|
||
"Sampling steps -": "迭代步数（step）-",
|
||
"Sampling steps webui": "webui 採样迭代步数",
|
||
"Sanity Sample Negative Prompt": "样本反向提示词",
|
||
"Sanity Sample Prompt": "样本提示词",
|
||
"Sanity Sample Seed": "样本种子",
|
||
"Sanity Samples": "合理性採样样本",
|
||
"saturation": "饱和度",
|
||
"Saturation": "饱和度",
|
||
"save": "储存",
|
||
"Save": "储存",
|
||
"Save & Restart": "储存并重启",
|
||
"Save 3D depth maps": "储存 3D 深度图",
|
||
"Save a checkpoint every N epochs.": "每 N Epochs 储存一次模型",
|
||
"Save a checkpoint every N steps, 0 to disable": "每隔 N 步储存一次模型权重进度(ckpt)，设定为 0 以停用",
|
||
"Save a checkpoint every N steps. ": "每 N 步储存一次模型权重进度",
|
||
"Save a copy of embedding to log directory every N steps, 0 to disable": "每 N 步将嵌入的副本储存到记录目录，0 表示停用",
|
||
"Save a copy of image before applying color correction to img2img results": "在对图生图结果套用颜色校正之前储存图像副本",
|
||
"Save a copy of image before applying highres fix.": "在做高解析度修复之前储存初始图像副本",
|
||
"Save a copy of image before doing face restoration.": "在进行脸部修复之前储存图像副本",
|
||
"Save all changes": "储存所有更改",
|
||
"Save alpha crop": "裁剪时保留透明度",
|
||
"Save an .srt (subtitles) file with the generation info along with each animation": "随动画储存包含生成资讯的.srt (字幕) 档案",
|
||
"Save an csv containing the loss to log directory every N steps, 0 to disable": "每 N 步储存一个包含 loss 的 CSV 档案到记录目录，0 表示停用",
|
||
"Save an image to log directory every N steps, 0 to disable": "每 N 步储存一张图像到记录目录，0 表示停用",
|
||
"Save and Test Webhook": "储存并测试 Webhook",
|
||
"save animation's depth maps as extra files": "额外储存动画深度图档案",
|
||
"save anime gif": "储存 GIF 动画",
|
||
"Save as": "储存为",
|
||
"save as csv": "储存为 csv",
|
||
"Save as csv(default)": "储存为 csv (预设)",
|
||
"Save as float16": "以 float16 储存",
|
||
"Save as half": "储存半精度模型",
|
||
"Save as preset": "储存为预设",
|
||
"Save as safetensors": "存为 SafeTensors 格式",
|
||
"save as txt": "储存为 txt",
|
||
"Save as txt": "储存为 txt",
|
||
"Save background instead of foreground": "储存背景而不是前景",
|
||
"Save Caption to .txt File": "储存描述文本为 .txt 档案",
|
||
"Save category (Windows only)": "储存类别（仅限Windows）",
|
||
"Save changes": "储存更改",
|
||
"save checkpoint after merge": "在整合後储存当前模型",
|
||
"Save Checkpoint Frequency": "储存模型权重进度(ckpt)的频率",
|
||
"Save Checkpoint to Subdirectory": "储存检查点到子目录",
|
||
"Save Controlnet Data in ...": "储存 ControlNet 数据到...",
|
||
"Save copy of large images as JPG": "将超过大小限制的图像储存JPG副本",
|
||
"Save crops to:": "储存裁剪好的成品到：",
|
||
"save csv": "储存 CSV ",
|
||
"Save Current Config": "储存当前组态",
|
||
"Save Current Model": "储存当前模型",
|
||
"Save current prompts as a style. If you add the token {prompt} to the text, the style use that as placeholder for your prompt when you use the style in the future.": "将当前的提示词储存为模版风格。如果你在文本中新增{prompt}标记，那麼将来你使用该模版风格时，你现有的提示词会取代模版风格中的{prompt}",
|
||
"Save current settings": "储存当前设定",
|
||
"Save current settings as default": "将当前设定储存为预设值",
|
||
"Save depth map": "储存深度图",
|
||
"Save depth maps": "储存深度图",
|
||
"Save DepthMap": "储存深度图",
|
||
"Save EMA Weights to Generated Models": "将 EMA 权重储存到产生的模型中",
|
||
"Save Embedding": "储存嵌入",
|
||
"Save every n epochs": "每 n 个 epoch 储存一次",
|
||
"Save for ALL presets": "储存为所有预设",
|
||
"Save format": "储存格式",
|
||
"Save generated images within tensorboard.": "在 TensorBoard 中储存产生的图像。",
|
||
"Save generation params text": "储存生成参数文本",
|
||
"Save grids to a subdirectory": "将宫格图储存到子目录",
|
||
"Save images": "储存图像",
|
||
"Save Images": "储存图像",
|
||
"Save images before ADetailer": "在进行後期细节修复前储存原始生成图像",
|
||
"Save images to a subdirectory": "将图像储存到子目录",
|
||
"Save images with embedding in PNG chunks": "储存图像，并在 PNG 图像档案中嵌入档案",
|
||
"Save in .safetensors format": "以 .safetensors 格式储存",
|
||
"Save incomplete images": "储存未完成的图像",
|
||
"Save init images when using img2img": "使用图生图时储存初始图像",
|
||
"Save Intermediate Images": "储存中间图像",
|
||
"Save intermediate images during the sampling process. You can also make videos from the intermediate images.": "在採样过程中储存中间图像。您也可以从中间图像製作影片。",
|
||
"Save JSON": "储存为 JSON",
|
||
"Save LyCORIS models to Lora directory. Do not use this if you are on older versions of webui or you use an extension that handles LyCORIS models.": "将 LyCORIS 模型储存到 Lora 目录 (若使用旧版本 webui 或使用 LyCORIS 扩展，请勿启用本选项)",
|
||
"Save mask": "储存遮罩",
|
||
"Save mask previews": "储存遮罩预览",
|
||
"Save masked image": "储存遮罩後图像",
|
||
"Save masks": "储存遮罩",
|
||
"save merged model ID to": "储存合併模型 ID 到",
|
||
"save metadata": "储存元数据",
|
||
"Save metadata": "储存元数据",
|
||
"Save Metadata": "储存中继资料",
|
||
"Save metadata (.safetensors only)": "储存元数据 (仅限 .safetensors)",
|
||
"Save metadata as caption": "将元数据储存为描述文本",
|
||
"save model": "储存模型",
|
||
"Save Model Frequency (Epochs)": "储存模型频率（训练週期）",
|
||
"Save model info": "储存模型资讯",
|
||
"Save Name": "储存档名",
|
||
"Save Only": "仅储存",
|
||
"Save options:": "输出到 output 的图像：",
|
||
"Save Original": "储存原件",
|
||
"Save original image": "储存原始图像",
|
||
"Save original image if face detection fails": "若脸部检测失败则储存原始图像",
|
||
"Save original image with mask and bounding box": "储存带有遮罩和箱体的原始图像",
|
||
"Save Outputs": "储存输出结果",
|
||
"Save path for images": "图像储存路径",
|
||
"Save PNG": "储存为 PNG",
|
||
"Save PNGinfo to grid": "将生成参数写入网格图（可用图像资讯直接辨识网格图）",
|
||
"save precision": "储存精度",
|
||
"Save preprocessed": "储存预處理",
|
||
"Save Preset": "储存预设",
|
||
"Save Presets": "储存预设",
|
||
"Save preview": "储存预览",
|
||
"Save Preview(s) Frequency": "储存预览图的频率",
|
||
"Save Preview(s) Frequency (Epochs)": "储存预览频率（训练週期）",
|
||
"Save prompts as text file": "储存提示词到文本档案",
|
||
"Save ranking in image's pnginfo": "在PNG图像资讯中储存评分",
|
||
"Save results as video": "储存结果为影片",
|
||
"Save Scene": "储存场景",
|
||
"Save score as EXIF or PNG Info Chunk": "将分数储存为 EXIF 或 PNG Info Chunk",
|
||
"Save separate diffusers snapshots when saving during training.": "在训练期间储存独立的模型。",
|
||
"Save separate diffusers snapshots when training completes.": "训练完成後储存独立的模型。",
|
||
"Save separate diffusers snapshots when training is canceled.": "当训练被取消时储存独立的模型。",
|
||
"save setting": "储存设定",
|
||
"Save Setting": "储存设定",
|
||
"save settings": "储存设定",
|
||
"Save Settings": "储存设定",
|
||
"Save settings as default": "将当前设定储存为预设值",
|
||
"Save style": "储存样式",
|
||
"Save Style": "储存样式",
|
||
"save successful": "储存成功",
|
||
"Save tags": "储存标籤",
|
||
"Save Tags": "储存标籤",
|
||
"Save tags (Windows only)": "储存标籤（仅限Windows）",
|
||
"Save tags after download": "下载後储存标籤",
|
||
"Save template to metadata: Write prompt template into the PNG metadata": "将範本储存至元数据：将提示词範本写入PNG数据中",
|
||
"Save text information about generation parameters as chunks to png files": "将有关生成参数的文本资讯，作为块储存到 PNG 图像档案中",
|
||
"Save textual inversion and hypernet settings to a text file whenever training starts.": "每次训练开始时，将文本反转和超网路设定储存到一个文字档案中。",
|
||
"Save the current merged model": "储存当前融合的模型",
|
||
"Save the foreground masks": "储存前景遮罩",
|
||
"Save the image to a dedicated directory (log/images).": "储存图像到指定目录 (预设: log/images)",
|
||
"Save the image to a dedicated directory (log\\images).": "储存图像到指定目录 (预设: log\\images)",
|
||
"Save to Presets": "储存到预设",
|
||
"Save to tags files": "储存标籤到档案",
|
||
"Save vector to text file": "将向量储存到文本档案",
|
||
"Save Video Settings": "储存影片设定",
|
||
"Save WebP in lossless format (highest quality, largest file size)": "储存为无损 WebP 格式 (最高品质，最大档案体积)",
|
||
"Save Weights": "储存权重",
|
||
"Save wildcards": "储存万用字元",
|
||
"Save with JSON": "储存为 JSON 格式",
|
||
"Save zip archive with images to a dedicated directory (log/images)": "储存包含图像的 .zip 档案到指定目录 (预设: log/images)",
|
||
"Save zip archive with images to a dedicated directory (log\\images)": "储存包含图像的 .zip 档案到指定目录 (预设: log\\images)",
|
||
"Saved Configs": "已储存的组态",
|
||
"Saved Configs: refresh": "已储存的组态: 刷新",
|
||
"Saved directories": "已储存的目录",
|
||
"Saves Optimizer state as separate *.optim file. Training can be resumed with HN itself and matching optim file.": "将最佳化器状态储存为单独的 *.optim 档案。可以使用超网络(HN)本身和符合的 optim 档案继续中断了的训练。",
|
||
"Saves Optimizer state as separate *.optim file. Training of embedding or HN can be resumed with the matching optim file.": "将优化器状态储存为独立的 *.optim 档。嵌入或超网路的训练可以使用相符合的优化档恢复。",
|
||
"Saving": "储存",
|
||
"Saving images": "图像储存",
|
||
"Saving images/grids": "储存图像 / 宫格图",
|
||
"Saving the image to an existing file": "已有同名档案时的储存行为",
|
||
"Saving to a directory": "储存到目录",
|
||
"Scale": "放大倍率",
|
||
"Scale by": "等比缩放",
|
||
"Scale Depth": "缩放深度",
|
||
"Scale Factor": "比例因子",
|
||
"Scale from image size": "从图像大小缩放",
|
||
"Scale Height": "高度比例",
|
||
"Scale Learning Rate": "缩放学习率",
|
||
"Scale Position": "比例位置",
|
||
"Scale Prior Loss": "缩放先前的损失",
|
||
"scale the canvas size, multiplicatively. [static = 1.0]": "缩放画布大小, 系数倍乘 [static = 1.0]",
|
||
"Scale the learning rate by the number of GPUs, gradient accumulation steps, and batch size.": "通过 GPU 数量、梯度累加步数(gradient accumulation steps)和每批数量(batch size)来缩放学习率",
|
||
"Scale to": "指定解析度缩放",
|
||
"Scale to Fit (Inner Fit)": "缩放到比例 (贴合内边)",
|
||
"Scale to maximum width or height": "放大至最大宽度或高度",
|
||
"Scale Width": "宽度比例",
|
||
"Scaling Startpoint": "缩放起点",
|
||
"Scan": "扫描",
|
||
"Scan Exif-/.txt-data (initially slower, but required for many features to work)": "扫描图像的 Exif 资讯与同名 txt 数据档案（初始读取速度较慢，许多功能都需要需要本选项启用）",
|
||
"Scan Exif-/.txt-data (slower, but required for exif-keyword-search)": "扫描图像的 Exif 资讯与同名 txt 档案（会拖慢读取速度，但使用搜寻生成资讯关键字的时候必须开启）",
|
||
"Scan for available updates": "检索可用更新",
|
||
"Scan for duplicate models": "检索重複模型",
|
||
"Scan for:": "检索: ",
|
||
"Scan Models for Civitai": "扫描并符合 Civitai 模型记录",
|
||
"Scanning takes time, just wait. Check console log for detail": "扫描需要一段时间，请耐心等待。检查控制台日誌以检视详情。",
|
||
"Scanning takes time, just wait. Check console log for details": "扫描需要时间，请耐心等待。检查控制台日誌以检视细节",
|
||
"scene": "scene (情景)",
|
||
"schedule": "参数表",
|
||
"Schedule controls how much the composite video is mixed in, whether set to mask is None or using a mask. This is the master mix.": "调度计劃控制複合影片的混合比例，无论是否使用遮罩。这是主混合设定。",
|
||
"Schedule to use for official training stuff.": "选择要用於训练官方东西的调度器",
|
||
"Scheduler": "调度器",
|
||
"scheduler type": "调度器类型",
|
||
"Scheduler type": "调度器类型",
|
||
"Scheduler:": "採样方法: ",
|
||
"science": "科学",
|
||
"Scoring type": "评分类型",
|
||
"screen": "滤色",
|
||
"Scribble": "Scribble (塗鸦)",
|
||
"Scribble Mode": "塗鸦模式",
|
||
"Scribble Mode (Invert colors)": "塗鸦模式（反色，强制预處理器重新辨识）",
|
||
"Scribble Mode (Reverse color)": "塗鸦模式 (反色)",
|
||
"Scribble/Sketch": "Scribble/Sketch (塗鸦/草图)",
|
||
"scribble_hed": "scribble_hed (塗鸦 - 整体嵌套)",
|
||
"scribble_pidinet": "scribble_pidinet (塗鸦 - 像素差分)",
|
||
"scribble_xdog": "scribble_xdog (塗鸦 - 强化边缘)",
|
||
"script": "指令码",
|
||
"Script": "指令码",
|
||
"Script Enabled": "启用脚本",
|
||
"Script first": "脚本优先",
|
||
"Script names to apply to ADetailer (separated by comma)": "应用於 After Detailer 的脚本名称 (用逗号分隔)",
|
||
"scripts": "脚本",
|
||
"sd model (experimental)": "SD 模型 (实验性)",
|
||
"SD Unet: refresh": "SD Unet: 刷新",
|
||
"SD upscale": "使用 SD 放大",
|
||
"SD VAE": "模型的 VAE",
|
||
"SD VAE: refresh": "SD VAE: 刷新",
|
||
"sd-extension-aesthetic-scorer": "美学评分延伸模组",
|
||
"sd-extension-system-info": "系统资讯面板",
|
||
"sd-parseq manifest": "sd-parseq 组态档案",
|
||
"sd-webui-agent-scheduler": "Agent Scheduler 任务排程代理",
|
||
"sd-webui-bilingual-localization": "Bilingual Localization 双语翻译对照",
|
||
"sd-webui-gelbooru-prompt": "Gelbooru 标籤自动摘录延伸模组",
|
||
"sd-webui-inpaint-anything": "Inpaint Anything 全能重绘",
|
||
"sd-webui-lobe-theme": "Lobe theme",
|
||
"sd-webui-multiple-hypernetworks": "複数超网络载入",
|
||
"sd-webui-pnginfo-beautify": "PNGINFO Beautify 美化",
|
||
"SD1.5 resolutions": "SD1.5 常用解析度",
|
||
"sd_model_hash": "SD模型杂凑值",
|
||
"sdweb-merge-board": "合併面板",
|
||
"sdweb-xyplus": "X/Y图表 Plus 延伸模组",
|
||
"SDXL base resolutions": "SDXL 官方解析度",
|
||
"SDXL high aesthetic score": "SDXL 美学分数高值",
|
||
"SDXL low aesthetic score": "SDXL 美学分数低值",
|
||
"SDXL Styles": "SDXL Styles 风格样式选择器",
|
||
"Seach models": "搜寻模型",
|
||
"seamlessly blend original content with inpainted content": "将原始画面与重绘内容无缝混合",
|
||
"Seams denoise strenght": "接缝重绘幅度",
|
||
"Seams fix": "储存接缝修复图像",
|
||
"Seams fix:": "储存接缝修复图像",
|
||
"Seams Mask blur (offset pass only)": "接缝遮罩边缘模糊程度 (仅偏移层)",
|
||
"Seams padding": "接缝填充度",
|
||
"Seams Width": "接缝宽度",
|
||
"search": "检索",
|
||
"Search": "搜寻",
|
||
"Search and Replace": "搜寻与取代",
|
||
"Search and Replace for all images displayed.": "搜寻并取代所有显示的图像",
|
||
"Search and Replace in": "在何處搜寻和取代",
|
||
"Search anything : Prompt, Size, Model, ...": "检索任意内容: 提示词, 尺寸, 模型, ...",
|
||
"Search Booru": "搜 Booru",
|
||
"Search by alias": "以别名搜寻",
|
||
"Search by translation": "以翻译搜寻",
|
||
"Search CivitAI": "检索 CivitAI",
|
||
"Search for embeddings": "搜寻嵌入",
|
||
"Search for hypernetworks": "搜寻超网络",
|
||
"Search for Loras": "搜寻 LoRA",
|
||
"Search for LyCORIS/LoHa": "检索 LyCORIS/LoHa 模型",
|
||
"Search for models": "搜寻模型",
|
||
"Search for webui style names": "检索 webui 预设样式名城",
|
||
"Search for wildcards": "搜寻万用字元",
|
||
"search huggingface models": "搜寻 Huggingface 模型",
|
||
"Search in wildcard names...": "使用万用字元名称检索...",
|
||
"Search Mode": "检索模式",
|
||
"Search models": "搜寻模型",
|
||
"Search negative prompt": "搜寻反向提示词",
|
||
"Search results": "搜寻结果",
|
||
"Search Results": "搜寻结果",
|
||
"Search string": "搜字串",
|
||
"Search tag, .. ->": "检索标籤, .. ->",
|
||
"Search Tags": "检索标籤",
|
||
"Search tags / Filter images by tags": "搜寻标籤 / 按标籤筛选图像",
|
||
"Search tags / Filter images by tags (INCLUSIVE)": "通过搜寻 / 筛选标籤来过滤图像（包含）",
|
||
"Search Term:": "检索词: ",
|
||
"Search Text": "搜寻文本",
|
||
"Search type:": "检索类型: ",
|
||
"Search workflows in subdirectories": "在子目录检索工作流",
|
||
"Search...": "搜寻...",
|
||
"Search:": "检索：",
|
||
"seascape": "seascape (海景)",
|
||
"second pass": "第二层",
|
||
"Second upscaler": "第二放大方法",
|
||
"Secondary detection model (B) (optional)": "次要检测模型 (B) (可选)",
|
||
"Secondary model": "模型 B",
|
||
"Secondary model (B)": "次要模型（B）",
|
||
"Secondary model (B): refresh": "模型 B: 刷新",
|
||
"Secondary Upscaler": "二级放大演算法",
|
||
"seconds": "秒",
|
||
"Security": "安全性",
|
||
"See": "检视",
|
||
"See here for explanation of each parameter.": "有关每个参数的说明，请点击 这裡 检视。",
|
||
"See the progress.": "检视图像增强的实时预览程序",
|
||
"seed": "种子",
|
||
"Seed": "随机种子",
|
||
"Seed behavior": "种子行为",
|
||
"Seed Combination": "种子数（Seed）",
|
||
"Seed for Random Ratio": "随机比率种子",
|
||
"seed for the whole video generation.": " 种子 (供整个视频生成过程使用)",
|
||
"Seed iter N": "种子迭代量 N",
|
||
"Seed of a different picture to be mixed into the generation.": "将要参与生成的另一张图的随机种子",
|
||
"Seed schedule": "种子调度计劃",
|
||
"Seed training RNG. Useful for testing, but may cause minor performance reduction.": "RNG 随机数种子训练。对测试有用，也许会导致性能略微下降。",
|
||
"seed travel": "种子变迁",
|
||
"Seed travel": "种子变迁",
|
||
"Seed:": "种子: ",
|
||
"seed_schedule should start and end on the same seed.": "种子调度计劃应该在同一种子上开始和结束",
|
||
"Seeds": "随机种子",
|
||
"Seg": "Seg (语义分割)",
|
||
"seg_anime_face": "seg_anime_face (语义分割 - 动漫脸部)",
|
||
"seg_ofade20k": "seg_ofade20k (语义分割 - OneFormer 算法 - ADE20k 协议)",
|
||
"seg_ofcoco": "seg_ofcoco (语义分割 - OneFormer 算法 - COCO 协议)",
|
||
"seg_ufade20k": "seg_ufade20k (语义分割 - UniFormer 算法 - ADE20k 协议)",
|
||
"Segment Anything": "Segment Anything\n",
|
||
"Segment Anything Model ID": "Segment Anything 模型 ID",
|
||
"Segment Anything Output": "Segment Anything 输出",
|
||
"Segment Anything status": "Segment Anything 状态",
|
||
"Segmentation": "Segmentation (语义分割)",
|
||
"segmentation prompt": "图像切分提示词",
|
||
"Segmentation status": "语义分割状态",
|
||
"Select": "选择模型",
|
||
"Select a collection": "选择选集",
|
||
"Select a component class or specific component.": "选择一个组件类别或特定组件",
|
||
"Select a device": "选择装置",
|
||
"Select a local config for the model from the configs directory of the webui root": "从 webui 根目录中的组态目录中选取本地组态",
|
||
"Select a sampling method": "选择採样方法",
|
||
"Select activation function of hypernetwork": "选择超网络的启用函式",
|
||
"Select activation function of hypernetwork. Recommended : Swish / Linear(none)": "选择超网路（Hypernetwork）的启用函数。建议：Swish／Linear（缐性，等於不用）",
|
||
"select all": "全选",
|
||
"Select blocks to change": "选择需要改动的分块",
|
||
"Select brush color": "选择画笔颜色",
|
||
"Select components to hide": "选择要隐藏的组件",
|
||
"Select Image": "选择图像",
|
||
"Select images from the left gallery.": "从左侧选择图像",
|
||
"Select joining char": "选择接合字母",
|
||
"Select keyframes to be given to ebsynth.": "Ebsynth 提取关键帧。",
|
||
"Select Layer weights initialization. Recommended: Kaiming for relu-like, Xavier for sigmoid-like, Normal otherwise": "选择层权重初始化方式。建议：relu-like 选 Kaiming，sigmoid-like 选 Xavier，其它选 Normal。",
|
||
"Select Layer weights initialization. relu-like - Kaiming, sigmoid-like - Xavier is recommended": "选择初始化层权重的方案，类别relu - Kaiming，类别sigmoid - Xavier 都是比较推荐的选项",
|
||
"Select model": "选择模型",
|
||
"Select or create a model to begin.": "选择或建立一个模型",
|
||
"Select or Create a Model.": "选择或建立一个模型。",
|
||
"Select preset": "选择预设",
|
||
"Select prompt": "选择提示词",
|
||
"Select Style": "选择样式",
|
||
"Select Tags": "选择标籤",
|
||
"Select template:": "选择模板:",
|
||
"Select the face to be swapped, you can sort by size or use the same gender as the desired face:": "选择要变换的脸部，可按大小排序或使用相同性别的作为所需脸部:",
|
||
"select the frame interpolation engine. hover on the options for more info": "选择帧插值引擎。悬停滑鼠指针在选项上检视更多资讯",
|
||
"Select this if you want to use the same seed for every generated image.\nThis is useful if you want to test prompt variations while using the same seed.\nIf there are no wildcards then all the images will be identical.": "勾选此选项以对每张产生的图像用同样的随机种子。\n这在想用同样的随机种子测试提示词变化时会有用。\n没有万用字元则所有图像会相同。",
|
||
"Select Translater": "翻译引擎：",
|
||
"Select visible tags": "选择可见标籤",
|
||
"Select which DAT models to show in the web UI.": "选择要在 webui 中显示的 DAT 模型",
|
||
"Select which Real-ESRGAN models to show in the web UI.": "选择要在 webui 显示的 Real-ESRGAN 模型",
|
||
"Select which Real-ESRGAN models to show in the web UI. (Requires restart)": "选择在网页介面显示哪些 Real-ESRGAN 模型。(需重启)",
|
||
"select-list": "选择列表",
|
||
"selected": "选中的",
|
||
"Selected": "已选取",
|
||
"Selected image": "当前所选图像",
|
||
"Selected Image :": "选择图像",
|
||
"Selected models for sharing": "可选共享的模型",
|
||
"Selected One": "选择一个",
|
||
"Selected Tags": "选中的标籤",
|
||
"selected tags from the images displayed.": "来自显示图像中已选择的标籤",
|
||
"Selected VAE overrides per-model preferences": "使用选中的 VAE 覆盖每个大模型的 VAE 首选项",
|
||
"selects the type of animation": "选择动画类型",
|
||
"Selects the type of Optical Flow to use if Optical Flow is selected in Hybrid motion.": "如果在混合运动模式中选择了光流法，则选择要使用的光流演算法类型",
|
||
"SelfAttentionGuidance Integrated": "SelfAttentionGuidance Integrated 自我注意引导",
|
||
"Send blended image to img2img Inpainting tab": "将混合後的图像發送到区域重绘页籤",
|
||
"Send dimensions to stable diffusion": "将当前图像尺寸资讯發送到生成设定",
|
||
"Send first frame to img2img Inpainting tab": "将首帧發送到区域重绘页籤",
|
||
"Send image and generation parameters to extras tab.": "發送图像和生成参数到後期處理页籤",
|
||
"Send image and generation parameters to img2img inpaint tab.": "發送图像和生成参数到图生图区域重绘页籤",
|
||
"Send image and generation parameters to img2img tab.": "發送图像和生成参数到图生图页籤",
|
||
"Send image and generation parameters to SVD tab.": "發送图像和生成参数到SVD影片生成页籤",
|
||
"Send image to tag selection": "發送到 标籤 (Tag) 选择",
|
||
"Send interrupt": "發送中断指令",
|
||
"Send pose to /openpose_editor_index for edit.": "發送姿态图到 openpose editor 页面编辑",
|
||
"send priority": "發送优先级",
|
||
"Send prompt up": "發送提示词到上方",
|
||
"Send seed when sending prompt or image to other interface": "将提示词或者图像發送到 >> 其他介面时，把随机种子也传送过去",
|
||
"Send size when sending prompt or image to another interface": "發送提示或图像到其他介面时，發送大小",
|
||
"Send this image to ControlNet.": ">> ControlNet",
|
||
"Send to": "發送至",
|
||
"Send to Blend": ">> 混合器",
|
||
"Send to Canvas Editor": "發送到 Canvas Editor",
|
||
"Send to ControlNet": ">> ControlNet",
|
||
"Send to ControlNet (img2img)": "發送到 ControlNet (图生图)",
|
||
"Send to ControlNet (txt2img)": "發送到 ControlNet (文生图)",
|
||
"Send to Controlnet-img2img": "發送到 图生图 - ControlNet",
|
||
"Send to Controlnet-txt2img": "發送到 文生图 - ControlNet",
|
||
"Send to Effect": ">> 效果器",
|
||
"Send to extras": ">> 附加功能",
|
||
"Send to Extras": "發送到 後期處理",
|
||
"Send to img2img": ">> 图生图",
|
||
"Send to img2img ControlNet": "發送到 图生图 ControlNet",
|
||
"Send to img2img inpaint": "發送到图生图重绘",
|
||
"Send to img2img:": ">> 图生图\n（数字对应模型号码）",
|
||
"Send to inpaint": ">> 区域重绘",
|
||
"Send to inpaint upload": ">> 区域重绘",
|
||
"Send to ip2p": "發送到 图生图 pix2pix",
|
||
"Send to Layer1": ">> 图层 1",
|
||
"Send to Layer2": ">> 图层 2",
|
||
"Send to Layer3": ">> 图层 3",
|
||
"Send to Layer4": ">> 图层 4",
|
||
"Send to Layer5": ">> 图层 5",
|
||
"Send to Multi-Merge": "發送到 多重合併",
|
||
"Send to openOutpaint": ">> openOutpaint",
|
||
"Send to QR Compare": "發送到 二维码对比器",
|
||
"Send to QR Scanner": "發送到 二维码扫描器",
|
||
"Send to Recipe": "發送到 配方",
|
||
"Send to txt2img": ">> 文生图",
|
||
"Send to txt2img and img2img": "發送到 文生图和图生图",
|
||
"Send to txt2img ControlNet": "發送到 文生图 ControlNet",
|
||
"Send to txt2img:": ">> 文生图\n（数字对应模型号码）",
|
||
"Send training samples to a Discord channel after generation.": "把生成的训练样本图像發送到 Discord 频道。",
|
||
"sensitive": "轻微性暗示/敏感内容（Sensitive）",
|
||
"Separate a list of words with commas, and the first word will be used as a keyword: script will search for this word in the prompt, and replace it with others": "以逗号分割的单词列表，第一个单词将被用作关键词：脚本将在提示词中搜寻这个单词，并用其他单词取代它",
|
||
"Separate a list of words with commas, and the script will make a variation of prompt with those words for their every possible order": "以逗号分割的单词列表，脚本会排列出这些单词的所有排列方式，并加入提示词各生成一次",
|
||
"Separate Feature Channels": "分享功能通道",
|
||
"Separate prompts into parts using vertical pipe character (|) and the script will create a picture for every combination of them (except for the first part, which will be present in all combinations)": "用竖缐分隔符(|)将提示词分成若干部分，脚本将为它们每个可能的组合建立一个图像（始终保留提示的第一部分，使用相同的种子）",
|
||
"Separate UNet/Text Encoder weights": "单独设定 UNet 及文字编码器的权重",
|
||
"Separate values for X axis using commas.": "使用逗号分隔 X 轴的值",
|
||
"Separate values for Y axis using commas.": "使用逗号分隔 Y 轴的值",
|
||
"sequential apply": "按顺序套用",
|
||
"Sequential Merge Parameters": "合併参数序列",
|
||
"Sequential XY Merge and Generation": "顺序合併并生成 XY 图",
|
||
"Server start time": "伺服器启动时间",
|
||
"Set": "设定",
|
||
"Set \"Hires steps\" to [0], if you need": "设定 \"高分迭代步数\" 为 [0], 如果你需要",
|
||
"Set 'seed_behavior' to 'schedule' under the Seed Scheduling section below.": "在下面的“种子调度”部分下，将 “seed_behavior” 设定为 “schedule” 。",
|
||
"Set a variable like so:": "像这样设定变数：",
|
||
"Set Gradients to None When Zeroing": "将梯度设定为 0 的时候设定为无",
|
||
"Set Init tab's strength slider greater than 0. Recommended value (.65 - .80).": "将Init页籤的强度滑块设定为大於0。建议值（.65-.80）。",
|
||
"Set new defaults": "设定新预设值",
|
||
"Set Random Pose": "设定随机姿势",
|
||
"Set ranking to": "设定评分为",
|
||
"set samplers": "设定採样方法",
|
||
"Set seed to -1, which will cause a new random number to be used every time": "将随机种子设定为 -1，则每次都会使用一个新的随机数",
|
||
"Set the Latent Couple extension to 2 area’s (standard setting)": "设定 Latent Couple 延伸模组为 2 分区域 (标准设定)",
|
||
"Set the maximum number of words to be used in the [prompt_words] option; ATTENTION: If the words are too long, they may exceed the maximum length of the file path that the system can handle": "设定在[prompt_words]选项中要使用的最大字数；注意：如果字数太长，可能会超过系统可處理的档案路径的最大长度",
|
||
"Set the preprocessor to [invert] If your image has white background and black lines.": "如果您的缐稿图像是白色背景和黑色缐条，请将预處理器设置为 [invert]。",
|
||
"Set the prompt compounder to: 2": "设定提示词混合为: 2",
|
||
"Set the Prompt Seperator mode to: automatic": "设定提示词分隔模式为: 自动",
|
||
"Set the Prompt Seperator mode to: prefix AND prompt + suffix": "设定提示词分隔模式为: prefix AND prompt + suffix （前缀 AND 提示词 + 後缀）",
|
||
"Set the Prompt seperator to: AND": "设定提示词分隔符为: AND",
|
||
"Set the strength to 0 automatically when no init image is used": "当无初始化图像在再被使用时，强度值将自动设定为 0",
|
||
"Set the value of seed to -1 when Generate forever buttons are clicked": "当点击 \"无限生成\" 按钮时，设定随机数种子的值为-1",
|
||
"Set this or number of steps to train for, not both.": "设定这个或者'训练迭代步数'，两者不能同时用",
|
||
"Set this to 2 to increase speed?": "将此设定为 2 以提高速度？",
|
||
"Set to 0 to disable": "设定为0以停用",
|
||
"set to default": "设为预设",
|
||
"Set Up": "建立",
|
||
"Set your total number of keyframes to be 21 more than the last inserted keyframe image.": "将关键帧总数设定得比最後插入的关键帧图像大 21",
|
||
"set_index": "设定索引",
|
||
"sets a midpoint at which a depth-map is to be drawn: range [-1 to +1]": "设定绘製深度图的中点: 範围 [ -1 到 +1 ]",
|
||
"Setting files": "设定档案",
|
||
"settings": "设定",
|
||
"Settings": "设定",
|
||
"Settings File": "设定档案",
|
||
"settings file path can be relative to webui folder OR full - absolute": "设定档案路径可以相对於 SD-WebUI 根目录，也可以是完整的绝对路径",
|
||
"Settings file Path can be relative to webui folder OR full - absolute": "设定档案路径可以相对於 SD-WebUI 根目录，也可以是完整的绝对路径",
|
||
"settings for": "设定。包括: ",
|
||
"Settings for img2img": "图生图设定项",
|
||
"Settings for txt2img": "文生图设定项",
|
||
"Settings in img2img hidden under Accordion": "图生图中的设定隐入手风琴容器",
|
||
"Settings in txt2img hidden under Accordion": "文生图中的设定隐入手风琴容器",
|
||
"Settings in UI": "UI 便捷设定",
|
||
"Settings stack. If it's not checked, it wont overwrite. Apply one, then another. Reset is old, update how you need.": "设定堆叠。如果未选中，则不会覆盖。套用一个，再套用另一个。重设已过时，请根据需要进行更新。",
|
||
"Settings->ControlNet->Allow other script to control this extension": "设定->ControlNet->允许其他脚本控制此扩展",
|
||
"Settings->Interrogate Option->Interrogate: include ranks of model tags matches in results": "设定->反推设定->反推结果包含模型标籤符合等级",
|
||
"setup codeformer": "设定 CodeFormer",
|
||
"setup gfpgan": "设定 GFPGAN",
|
||
"setup paths": "设定路径",
|
||
"setup SD model": "设定 SD 模型",
|
||
"SFW mode 👀 (blur all images)": "健全模式 👀 (模糊所有图像)",
|
||
"SGM noise multiplier": "使用 SGM 噪点倍率",
|
||
"SHA256 hash of the current checkpoint": "当前模型的 SHA256 杂凑值",
|
||
"Shapes": "形状",
|
||
"Share attention in batch": "在一批生成中共享注意力",
|
||
"Shared memory": "共享记忆体",
|
||
"sharpen face": "锐化脸部",
|
||
"Sharpness": "锐度",
|
||
"Sharpness Method": "锐度算法",
|
||
"Sharpness Multiplier": "锐度倍数",
|
||
"Sharpness, Brightness, Color, Contrast:": "锐利度，明亮度，色调，对比度",
|
||
"Sharpness:": "锐化度",
|
||
"Shift attention": "转移注意力",
|
||
"shift-attention": "关注转移",
|
||
"Shifts when preservation of original content occurs during denoising.": "降噪过程中, 原始画面保留比例随採样迭代步数变化的调度函式偏离量。",
|
||
"should be 2 or lower.": "必须小於等於 2",
|
||
"Shoulder To Hip": "肩臀距离",
|
||
"Shoulder Width": "肩宽",
|
||
"Show": "显示",
|
||
"Show '?' next to tags, linking to its Danbooru or e621 wiki page": "在标籤 旁显示 '?' , 网址到其 Danbooru 或 e621 的 Wiki 页面",
|
||
"Show '?' next to tags, linking to its Danbooru or e621 wiki page (Warning: This is an external site and very likely contains NSFW examples!)": "在标记旁显示「？」，连结到其 Danbooru 或 e621 wiki 页面（警告：这是外部网站，很可能包含 NSFW 内容！）",
|
||
"Show a progress bar in the console for tiled upscaling.": "在控制台中新增用於显示分块放大图像进度的进度条",
|
||
"Show Ad": "显示广告",
|
||
"Show Additional Generation Info": "显示附加生成资讯",
|
||
"Show all pages": "显示所有页面",
|
||
"Show all results": "显示所有结果",
|
||
"Show API Key": "显示 API Key",
|
||
"Show Aria2 logs in CMD": "在 CMD 中显示 Aria2 日誌",
|
||
"Show Aria2 Logs in CMD": "在 CMD (控制台) 显示 Aria2 日誌",
|
||
"Show Aria2 logs in console": "在控制台显示 Aria2 日誌",
|
||
"Show Axis": "显示轴",
|
||
"Show batch images in gradio gallerie output": "在 Gradio Gallerie 输出中批量显示图像",
|
||
"Show batch images in gradio gallery output": "在 Gradio 图像输出框中批量显示图像",
|
||
"Show Button On Thumb Mode": "在缩略图模式下显示按钮",
|
||
"Show Button On Thumb Mode in SD webui versions before 1.5.0": "在 SD webui 1.5.0 前的版本的拇指模型检视下显示按钮",
|
||
"Show cards for models in hidden directories": "显示隐藏目录中的模型卡片",
|
||
"Show Civitai Link events in the console": "在控制台输出 Civitai Link 事件",
|
||
"Show command for conversion": "显示转换命令行",
|
||
"Show console debug": "在控制台显示侦错资讯",
|
||
"Show console logs during update scanning": "在更新扫描过程中显示控制台日誌",
|
||
"Show debug message": "显示侦错资讯",
|
||
"Show DepthMap": "显示深度图",
|
||
"Show description of how to edit tags": "显示如何编辑标籤",
|
||
"Show description on card": "在卡片上显示描述资讯",
|
||
"Show dirs": "显示目录",
|
||
"Show extra networks": "显示扩展模型面板",
|
||
"Show extra options": "显示额外选项",
|
||
"Show generated images in ui": "在使用者介面上显示产生了的图像",
|
||
"Show generation progress in window title.": "在视窗标题中显示生成进度",
|
||
"Show gradio deprecation warnings in console.": "在控制台中显示 Gradio 的弃用警告",
|
||
"Show Grid": "显示网格",
|
||
"Show grid in gallery": "在画廊中显示网格图",
|
||
"Show grid in results for web": "在网页的结果中显示宫格图",
|
||
"Show Ground": "显示地面",
|
||
"Show HeatMap": "显示热度图",
|
||
"Show hidden directories": "显示隐藏目录",
|
||
"Show image creation progress every N sampling steps. Set 0 to disable.": "在每 N 个採样迭代步数显示图像生成进度。设定 0 停用",
|
||
"Show image creation progress every N sampling steps. Set to 0 to disable. Set to -1 to show after completion of batch.": "每 N 个採样迭代步数显示图像生成进度。设定 0 停用，设定 -1 使预览在批量生成完成之後再显示",
|
||
"Show Images": "显示图像",
|
||
"Show images zoomed in by default in full page image viewer": "在整页图像检视器中，预设放大显示图像",
|
||
"Show intermediate steps": "显示中间步骤",
|
||
"Show internal metadata": "显示内部元数据",
|
||
"Show Live preview in full page image viewer": "允许实时预览在网页全萤幕图像检视器开启时显示",
|
||
"Show live previews of the created image": "显示所创建的图像的实时预览",
|
||
"Show live tag translation below prompt": "在提示词下方显示实时标籤翻译",
|
||
"Show live tag translation below prompt (WIP, expect some bugs)": "在提示词下方显示实时标籤翻译 (未完成，预计会有一些bug)",
|
||
"Show maximum dimension button": "显示最大尺寸按钮",
|
||
"Show maximum width or height button": "显示最大宽度或高度按钮",
|
||
"Show minimum dimension button": "显示最小尺寸按钮",
|
||
"Show more info": "显示更多资讯",
|
||
"Show new live preview image every N sampling steps. Set to -1 to show after completion of batch.": "每N个採样步骤更新一次实时预览图像，设定为-1以在每批次完成後显示，设定为0关闭实时预览 (建议设为0，开启会佔用大量显存和显卡算力)",
|
||
"Show only favorite Axis Option": "仅显示常用坐标轴类型",
|
||
"Show only one page": "仅显示一页",
|
||
"Show only the tags selected in the Positive Filter": "只展示在 Positive 过滤器中的被选中标籤",
|
||
"Show original image": "显示原始图像",
|
||
"Show pre-defined aspect ratio buttons": "显示纵横比预设按钮",
|
||
"Show pre-defined percentage buttons": "显示百分比预设按钮",
|
||
"Show predefined percentage buttons": "显示预设的百分比按钮",
|
||
"Show Preview": "显示预览",
|
||
"Show preview thumbnails for extra networks if available": "显示扩展模型预览缩略图 (如可用)",
|
||
"Show previews of all images generated in a batch as a grid": "以宫格图的形式，预览批量产生的所有图像",
|
||
"Show progress indicator": "显示进度指示器",
|
||
"Show progressbar": "显示进度列",
|
||
"Show result images": "显示输出图像",
|
||
"Show Textbox": "显示文本框",
|
||
"Show the Extra Networks directory view by default": "预设显示扩展模型目录检视",
|
||
"Show the first N batch img2img results in UI": "在 UI 中显示前 N 批的图生图结果",
|
||
"Show verbose debug info at console": "在控制台中输出详尽的侦错资讯",
|
||
"Show warnings in console.": "在控制台显示警告讯息。",
|
||
"Show Width/Height and Batch sliders in same row": "在同一列中显示宽度 / 高度和批量滑块",
|
||
"Show/hide extra networks": "显示 / 隐藏额外的网路",
|
||
"Show/Hide Generation Info": "显示/隐藏生成资讯",
|
||
"Shows a gallery of generated pictures by artists separated into categories.": "将艺术家按类别劃分，并显示其产生出来的图像",
|
||
"Shrink the brush size": "缩小画笔",
|
||
"shuffle": "shuffle (随机洗牌)",
|
||
"Shuffle": "Shuffle (随机洗牌)",
|
||
"Shuffle Tags": "洗牌标籤",
|
||
"Shuffle tags by ',' when creating prompts.": "在建立提示时用 ',' 洗牌标籤",
|
||
"Shuffle wildcards before use for more random outputs": "使用前打乱万用字元以获取更随机的结果",
|
||
"Shuffleing tags by ',' when create texts.": "建立文本时打乱以 ',' 分割的标籤",
|
||
"Shutdown server": "关闭伺服器",
|
||
"Sidebar": "侧侧边列",
|
||
"Sides": "每边张数",
|
||
"Sigma adjustment for finding noise for image": "为寻找图中噪点的希格玛（Sigma）调整",
|
||
"sigma churn": "希格玛流失量（sigma churn）",
|
||
"Sigma Churn": "希格玛流失量（Sigma Churn）",
|
||
"sigma max": "最大 Sigma",
|
||
"Sigma max": "希格玛最大值（Sigma max）",
|
||
"sigma min": "最小 Sigma",
|
||
"Sigma min": "希格玛最小值（Sigma min）",
|
||
"sigma noise": "希格玛噪点量（sigma noise）",
|
||
"Sigma noise": "希格玛噪点量（Sigma noise）",
|
||
"Sigma Noise": "Sigma 噪点",
|
||
"Sigma schedule": "Sigma 调度计劃",
|
||
"sigma tmax": "sigma tmax (最大时间步长)",
|
||
"sigma tmin": "希格玛最小值（sigma tmin）",
|
||
"Silhouette": "Silhouette (剪影)",
|
||
"similar": "相似",
|
||
"Similarity": "相似度",
|
||
"Simple": "单一值",
|
||
"Simple (Auto-value)": "单一值（自动取值）",
|
||
"Simple :": "简要地说: ",
|
||
"Simplified Chinese localization": "简体中文本地化",
|
||
"Simplified Chinese localization, recommend using with Bilingual Localization.": "简体中文本地化，推荐搭配双语翻译对照扩充功能使用。",
|
||
"Simplified Chinese localization.": "简体中文本地化。",
|
||
"Since compilation happens only on the first run, the first inference (or warm up inference) will be slower than subsequent inferences.": "由於编译仅在第一次执行时进行, 所以第一次推理 (预热推理) 会比後续推理慢",
|
||
"Since there is a self-attention operation in VAE, it may change the distribution of features. This processing will superimpose the attention map of self-attention on the original Att-Map.": "由於 VAE 中使用了自我注意力机制，这可能会改变特徵的分佈。这种處理会将自我注意力产生的注意力图与原始的注意力图叠加在一起。",
|
||
"Single": "单次處理",
|
||
"single image": "单张图像",
|
||
"Single image": "单张图像",
|
||
"Single Image": "单张图像",
|
||
"Single process": "单次處理",
|
||
"Single text file with all prompts": "包含所有提示词的一个文本档案",
|
||
"Size": "尺寸",
|
||
"size": "尺寸",
|
||
"Size of the face when recreating": "重建脸部的尺寸",
|
||
"Size of the thumbnails (px)": "缩略图大小 (单位: 像素)",
|
||
"Size to generate": "生成规格",
|
||
"Size:": "大小: ",
|
||
"sketch": "素描",
|
||
"Sketch": "素描",
|
||
"Sketch initial brush color": "塗鸦初始画笔颜色",
|
||
"Skip": "跳过",
|
||
"Skip frame extraction": "跳过部分帧提取",
|
||
"Skip generation and use (edited/custom) depthmaps in output directory when a file already exists.": "当档案已存在时，跳过生成并使用输出目录中的（已存在/自订）的深度图。",
|
||
"Skip generation and use (edited/custom) depthmaps in output directory when a file exists.": "当档案已存在时, 跳过生成并在输出目录中使用 (编辑後/自订) 的深度图",
|
||
"Skip img2img processing when using img2img initial image": "使用图生图初始图像时跳过图生图處理",
|
||
"Skip negative prompt for steps where image is already mostly denoised; the higher this value, the more skips there will be; provides increased performance in exchange for minor quality reduction.": "对图像已经完成大部分降噪的採样步数, 跳过反向提示词; 这个值越高, 跳过的步数就越多; 以轻微的品质降低换取更高的性能",
|
||
"Skip NSFW Preview Images": "下载预览图时跳过含成人内容的图像",
|
||
"SKip NSFW Preview images": "下载预览图时跳过含成人内容的图像",
|
||
"SKip NSFW Preview Images": "下载预览图时跳过含成人内容的图像",
|
||
"Skip steps": "跳过步骤数",
|
||
"Skip video creation": "跳过影片生成",
|
||
"Skip/Reset CLIP position_ids": "跳过或重设 CLIP position_ids 键值",
|
||
"Slerp angle": "球面缐性插值角度",
|
||
"Slerp interpolation": "球面缐性插值角度",
|
||
"slow": "慢速",
|
||
"Slow Mo": "慢动作",
|
||
"Slow start": "缓慢开始（Slow start）",
|
||
"Slow-Mo the interpolated video, audio will not be used if enabled": "慢动作插值影片, 启用後不使用音讯",
|
||
"slower": "很慢",
|
||
"Small script for AUTOMATIC1111/stable-diffusion-webui to create images that exists between seeds.": "一个用於生成不同随机种子之间的渐变过程的小指令码",
|
||
"Smart pre-process including auto subject identification, caption subject swapping, and upscaling/facial restoration.": "智慧预處理，包括自动识别主体、切换描述文字主体和放大／脸部恢复",
|
||
"Smart Preprocess": "智慧预處理",
|
||
"Smart Process": "智慧预處理",
|
||
"Smart subject": "智能主题",
|
||
"Smart subject tries to determine what to and not to generate based on your subject. Example, if your Overwrite subject is formed like this: Obese man wearing a kimono": "智能主题会尝试根据你的主题决定要生成什麼和避免生成什麼。\n比如说，如果你的覆盖主题是这样的格式：穿着和服的肥胖男子",
|
||
"Smoothing": "柔和度",
|
||
"Smoothing generated images by skipping a few very last steps and averaging together some images before them.": "跳过最後幾步并将之前的一些图像平均在一起，以平滑生成的图像。",
|
||
"Snapshot to Resume": "从 Snapshot 恢复",
|
||
"So it's normal for the first inference after a settings change to be slower, while subsequent inferences use the optimized compiled model and run faster.": "所以设定更改後的第一次推理速度较慢是正常的, 後续推理会使用编译最佳化後的模型且速度更快",
|
||
"Socket port for image browser": "Cozy 图库浏览器的 Socket 连接埠",
|
||
"Soft inpainting": "柔和重绘",
|
||
"Soft inpainting allows you to": "柔和区域重绘可以",
|
||
"soft_light": "柔光",
|
||
"SoftEdge": "SoftEdge (软边缘)",
|
||
"softedge_hed": "softedge_hed (软边缘检测 - HED)",
|
||
"softedge_hedsafe": "softedge_hedsafe (软边缘检测 - 保守 HED 算法)",
|
||
"softedge_pidinet": "softedge_pidinet (软边缘检测 - PiDiNet 算法)",
|
||
"softedge_pidisafe": "softedge_pidisafe (软边缘检测 - 保守 PiDiNet 算法)",
|
||
"softedge_teed": "softedge_teed (软边缘检测 - 高效边缘检测)",
|
||
"Solid color": "纯色",
|
||
"solution.": "的解决方法。",
|
||
"Some settings have been moved to the settings tab. Find them in the Dynamic Prompts section.": "一些选项已经被移动至设定中，在设定裡的 Dynamic Prompt 选项下可以找到",
|
||
"Sonar": "声纳",
|
||
"Sort ascending": "升序",
|
||
"Sort bounding boxes by": "按以下方式对边界框进行排序",
|
||
"sort by": "排序方式",
|
||
"Sort by": "排序方式",
|
||
"Sort by alphabetical order": "按首字母顺序排序",
|
||
"Sort by date created": "按建立日期排序",
|
||
"Sort by date modified": "按修改日期排序",
|
||
"Sort by filename": "按档名排序",
|
||
"Sort by path": "按路径排序",
|
||
"Sort by size (larger>smaller)": "按大小排序 (更大>更小)",
|
||
"Sort by:": "排序方式: ",
|
||
"Sort By:": "排序方式: ",
|
||
"Sort caption on save": "储存时对描述排序",
|
||
"Sort descending": "降序",
|
||
"Sort LoRA models by": "LoRA 模型的排序方式",
|
||
"Sort models by": "排序方式",
|
||
"Sort Order": "排序方式",
|
||
"Sort tags": "排序标籤",
|
||
"Sort tags in the images displayed.": "在已显示的图像中排序标籤",
|
||
"Sort wildcard file contents alphabetically": "按字母顺序排列万用字元档案内容",
|
||
"Sorting": "排序",
|
||
"Soundtrack path": "音轨路径",
|
||
"Source": "来源",
|
||
"Source Checkpoint": "源模型权重存档点",
|
||
"Source Checkpoint:": "来源模型权重存档点：",
|
||
"Source directory": "来源目录",
|
||
"Source embedding to convert": "用於转换的源 Embedding",
|
||
"Source image": "原始图像",
|
||
"Source image URL": "源图像地址",
|
||
"Source Images": "图像源",
|
||
"Source Path": "来源路径",
|
||
"Source URL where this model could be found": "模型的發布网址",
|
||
"space": "空间",
|
||
"Space": "Space (空间艺术)",
|
||
"Spanish localization": "西班牙语本地化",
|
||
"SparseCtrl": "SparseCtrl (稀疏控制)",
|
||
"Specific branch name": "特定分支名",
|
||
"specify a custom settings file and ignore settings displayed in the interface": "指定自订设定档案并忽略介面中显示的设定",
|
||
"Specify model revision": "指定模型版本",
|
||
"Specify model variant": "指定模型变种",
|
||
"Specify the amount that you wish to expand the mask by (recommend 0-10)": "设定遮罩扩展量（建议0-10）",
|
||
"Specify the amount that you wish to expand the mask by (recommend 30)": "设定遮罩扩展量（建议30）",
|
||
"specify your own seed schedule": "指定自己所需的种子调度计劃",
|
||
"specify your own seed schedule (found on the Keyframes page)": "指定你自己的种子数表（可在关键帧页籤中找到）",
|
||
"Spectral Mod Mode": "光谱调製模式",
|
||
"Spectral Mod Multiplier": "光谱调製倍数",
|
||
"Spectral Mod Percentile": "光谱调製百分比",
|
||
"Speech": "语音",
|
||
"split": "分离",
|
||
"Split based on cuts (as well)": "基於分割进行提取（同时）",
|
||
"Split image overlap ratio": "分割图像重叠的比率",
|
||
"Split image threshold": "图像分割阈值",
|
||
"Split mode": "分割模式",
|
||
"Split over-sized images": "分割过大的图像",
|
||
"Split oversized images": "分割过大的图像",
|
||
"Split oversized images into two": "将过大的图像分为两份",
|
||
"Split sides again after inpainting?": "重绘後分边?",
|
||
"Split Video": "分割影片",
|
||
"Splits model loss during training into Instance Loss and Prior Loss. Requires class images to be enabled.": "将训练过程中的模型损失分为 \"实例损失\" 和 \"先验损失\" 。需要启用类别图像。",
|
||
"square": "square (方图)",
|
||
"SR Model": "SR 模型",
|
||
"SSAA": "超级採样抗锯齿",
|
||
"Stability API Settings": "Stability API 设定",
|
||
"stability_score_offset": "稳定性得分偏移",
|
||
"stability_score_thresh": "稳定性得分阈值",
|
||
"stability_score_threshold": "稳定性得分阈值",
|
||
"Stable Diffusion": "SD",
|
||
"Stable Diffusion backend": "Stable Diffusion 後端",
|
||
"Stable Diffusion checkpoint": "Stable Diffusion 模型权重存档点",
|
||
"Stable Diffusion checkpoint autoload on server start": "在伺服器启动时自动载入 Stable Diffusion 模型",
|
||
"Stable Diffusion checkpoint: refresh": "SD 模型: 刷新",
|
||
"Stable Diffusion version": "Stable Diffusion 版本",
|
||
"Stable Diffusion XL": "SDXL",
|
||
"Stable Horde API Key": "Stable Horde API 密钥",
|
||
"Stable Horde Client": "Stable Horde 用户端",
|
||
"Stable Horde Client. Generate pictures using other user's PC. Useful if u have no GPU.": "Stable Horde 用户端。使用其他使用者的 PC 产生图像。如果自己没有 GPU 的话，这很有用。",
|
||
"Stable Horde Endpoint": "Stable Horde 伺服器地址",
|
||
"Stable Horde Interrogation": "Stable Horde 反推",
|
||
"Stable Horde Settings": "Stable Horde 设定",
|
||
"Stable Horde Worker": "Stable Horde 工作端",
|
||
"stable-diffusion-webui-aesthetic-gradients": "美术风格梯度",
|
||
"stable-diffusion-webui-aesthetic-image-scorer": "美术风格评分",
|
||
"stable-diffusion-webui-artists-to-study": "艺术家图库",
|
||
"stable-diffusion-webui-auto-tls-https": "自动 tls-https",
|
||
"stable-diffusion-webui-conditioning-highres-fix": "高解析度修复原图调节强度 ",
|
||
"stable-diffusion-webui-dataset-tag-editor": "数据集标籤编辑器",
|
||
"stable-diffusion-webui-embedding-editor": "Embedding 编辑器",
|
||
"stable-diffusion-webui-inspiration": "灵感",
|
||
"stable-diffusion-webui-localization-zh_Hant": "繁体中文（zh_Hant）语言包",
|
||
"stable-diffusion-webui-prompt-travel": "提示词变迁",
|
||
"stable-diffusion-webui-randomize": "随机化",
|
||
"stable-diffusion-webui-tokenizer": "词元分析器(tokenizer)",
|
||
"Stackable": "可堆叠",
|
||
"Stackable checkbox is not used for saves, it's used when making a selection from the dropdown, whether to apply as stackable or not": "可堆叠複选框不用於储存，它用於从下拉列表中进行选择，无论是否套用为可堆叠",
|
||
"Stacked Papercut": "Stacked Papercut (叠式剪纸)",
|
||
"stage 1": "步骤 1",
|
||
"Stage 1": "第一阶段",
|
||
"stage 2": "步骤 2",
|
||
"Stage 2": "第二阶段",
|
||
"stage 3": "步骤 3",
|
||
"stage 3.5": "步骤 3.5",
|
||
"stage 4": "步骤 4",
|
||
"stage 5": "步骤 5",
|
||
"stage 6": "步骤 6",
|
||
"stage 7": "步骤 7",
|
||
"stage 8": "步骤 8",
|
||
"stage1": "步骤 1",
|
||
"stage2": "步骤 2",
|
||
"stained glass": "stained glass (彩色玻璃)",
|
||
"Stained Glass": "Stained Glass (染色玻璃)",
|
||
"stars": "按 Star 数量",
|
||
"Start At Step": "开始作用时机",
|
||
"Start Auto Translate": "开始自动翻译",
|
||
"Start batch process": "开始批量處理",
|
||
"Start Cropping": "开始裁剪",
|
||
"Start drawing": "开始绘製",
|
||
"start extracting the input video only from this frame number": "指定输入影片某帧开始提取",
|
||
"Start from Axis": "优先遍历的坐标轴",
|
||
"Start generating and upscaling!": "开始生成并放大",
|
||
"Start of prompt": "提示词前",
|
||
"Start of the prompt": "起始提示词",
|
||
"Start parsing settings...": "开始解析设定...",
|
||
"Start Percent": "开始百分比",
|
||
"Start steps": "开始步数",
|
||
"Start training.": "开始训练",
|
||
"Start WebUi with option --api for this to work.": "启动 WebUi 时加入 --api 启动参数来保证本页籤的功能正常工作。",
|
||
"Starting Control Step": "开始控制步数(%)",
|
||
"Starting Control Step schedule": "引导介入时机调度计劃",
|
||
"Starting seed for the animation. -1 for random": "动画起始随机数种子。设定 -1 为随机",
|
||
"Startup profile": "启动计时",
|
||
"State": "执行状态",
|
||
"State to restore": "待恢复部分",
|
||
"Static engines support a single specific output resolution and batch size.": "静态 (Static) 引擎支援单个特定的输出解析度和单批数量。",
|
||
"status": "状态",
|
||
"Status": "状态",
|
||
"Status:": "状态: ",
|
||
"Std": "标准差",
|
||
"Steal 'em quick, by using": "更快的提取方式。通过使用 ",
|
||
"Steampunk": "Steampunk (蒸汽朋克)",
|
||
"step": "迭代步数",
|
||
"Step": "迭代步数",
|
||
"Step count": "步数",
|
||
"Step count (grad mode)": "步数 (梯度模式)",
|
||
"Step method": "步进方法",
|
||
"Step method (grad mode)": "步进方法 (梯度模式)",
|
||
"Step Ratio of Text Encoder Training": "文字编码器训练步骤比率",
|
||
"Step size": "步幅 (梯度模式)",
|
||
"Step size (grad mode)": "步幅 (梯度模式)",
|
||
"Steps": "叠代步数",
|
||
"steps": "叠代步数",
|
||
"Steps (Number of images between each seed)": "步数（每个种子之间的图像数量）",
|
||
"Steps Animation": "步骤动画",
|
||
"Steps animation": "预览动画化 (Steps animation)",
|
||
"Steps between prompts": "每个提示词之间的迭代步伐",
|
||
"Steps schedule": "迭代步数调度计劃",
|
||
"Steps:": "步数: ",
|
||
"Sticker": "贴纸",
|
||
"still life": "still life (静物画)",
|
||
"Still Mode (fewer hand motion, works with preprocess `full`)": "静止模式 (更少的手部运动, 需要和 `完整` 预處理一起工作)",
|
||
"Still Mode (fewer head motion, works with preprocess `full`)": "静止模式 (更少的头部运动, 需要和 `完整` 预處理一起工作)",
|
||
"Stop": "停止",
|
||
"Stop at CLIP layers": "在 CLIP 模型的最後哪一层停下",
|
||
"Stop At last layers of CLIP model": "在 CLIP 模型的最後哪一层停下 (Clip skip)",
|
||
"Stop At Step": "终止作用时机",
|
||
"Stop generation of current batch and continues onto next batch": "中止当前批次的生成并继续生成下一个批次",
|
||
"Stop processing current image and continue processing.": "停止處理当前图像，并继续處理下一个",
|
||
"Stop processing images and return any results accumulated so far.": "停止處理图像，并返回迄今为止累积的任何结果",
|
||
"stop the extraction of the video at this frame number. -1 for no limits": "指定输入影片某帧结束提取，-1 表示无限制（全部）",
|
||
"Stop XY": "停止生成 X/Y 图",
|
||
"Store all steps of inference also (slow!)": "同时储存推理中的所有步 （慢！）",
|
||
"Store frames in ram": "将帧储存到记忆体",
|
||
"Store images in database": "在数据库中存储图像",
|
||
"Store preferences and SVG content locally": "在本地储存设定和SVG图像",
|
||
"storybook realism": "storybook realism (故事书写实主义/迪士尼艺术)",
|
||
"straight-line": "直缐",
|
||
"Strategy Game": "Strategy Game (策略遊戏)",
|
||
"Strategy is to sample from a shortlist of the top K tokens. This approach allows the other high-scoring tokens a chance of being picked.": "原理是从前K个token的列表中进行採样，这种方法使得其他高分token有机会被选中",
|
||
"street art": "street art (街头艺术)",
|
||
"Street Fighter": "Street Fighter (街头霸王)",
|
||
"streetscape": "streetscape (街景)",
|
||
"strength": "强度",
|
||
"Strength": "强度",
|
||
"Strength 0 no init": "强度为 0 时停用初始化",
|
||
"Strength of negative feedback relative to positive feedback.": "相对於正向反馈的反向反馈权重强度",
|
||
"Strength schedule": "强度调度计劃",
|
||
"Stretch image": "拉伸图像",
|
||
"Stretch pixels at border": "延伸边缘的画素",
|
||
"Strict": "严格",
|
||
"Strict Tokens": "严格的标记",
|
||
"Stride": "步幅",
|
||
"String to use as left bracket for parser variants, .e.g {variant1|variant2|variant3}": "作为解析器变体左括号的字串，例如 {variant1|variant2|variant3}",
|
||
"String to use as right bracket for parser variants, .e.g {variant1|variant2|variant3}": "作为解析器变体右括号的字串，例如 {variant1|variant2|variant3}",
|
||
"String to use as wrap for parser wildcard, .e.g __wildcard__": "用作解析万用字元的字串指令，例如 __wildcard__",
|
||
"Style": "样式",
|
||
"Style 1": "模版风格 1",
|
||
"Style 2": "模版风格 2",
|
||
"Style Fidelity": "风格保真度",
|
||
"Style Fidelity (only for \"Balanced\" mode)": "风格保真度 (仅用於 \"平衡\" 模式)",
|
||
"Style Name": "样式名称",
|
||
"Style Selector": "样式选择器",
|
||
"Style to apply; styles have components for both positive and negative prompts and apply to both": "要使用的模版风格； 模版风格包含正向和反向提示词，并应用於两者\n🎨 随机新增一个艺术家到提示词中\n ↙️ 从提示词中读取生成参数，如果提示词为空，则读取上一次的生成参数到使用者介面\n💾 将当前的提示词储存为模版风格(储存在styles.csv)\n📋 将所选模板风格，应用於当前提示词\n如果你在文本中新增{prompt}标记，并储存为模版风格\n那麼将来你使用该模版风格时，你现有的提示词会取代模版风格中的{prompt}",
|
||
"StyleAlign Integrated": "StyleAlign Integrated 风格对齐",
|
||
"StylePile": "样式积累",
|
||
"Styles": "样式",
|
||
"Styles allow you to add custom text to prompt. Use the {prompt} token in style text, and it will be replaced with user's prompt when applying style. Otherwise, style's text will be added to the end of the prompt.": "预设样式允许自行新增自订文本到提示词中。\n在预设样式文本中使用 {prompt} 词元，在套用预设样式时，它将被使用者的提示词所替代。\n不然的话，预设样式文本会被新增到提示词末尾。",
|
||
"Styles: refresh": "预设样式: 刷新",
|
||
"Sub directories": "子目录",
|
||
"Sub directory depth": "子目录深度",
|
||
"Sub folder:": "子目录: ",
|
||
"Sub Folder:": "子目录: ",
|
||
"Sub-folder": "子目录",
|
||
"Subdirectory": "子目录",
|
||
"Subdirectory (even temp dir)": "子目录 (包括临时目录)",
|
||
"Subject": "主题",
|
||
"Subject Class": "主题类别",
|
||
"Subject class to crop (leave blank to auto-detect)": "要裁切的主题类别（留空以自动侦测）",
|
||
"Subject Name": "主题名称",
|
||
"Subject Name to replace class with in captions": "要在描述中将类别取代的主题名称",
|
||
"Subject Name to replace class with in cations": "描述文本中要取代类别(class)的主体名(subject)",
|
||
"Subject Types": "主题类型",
|
||
"Submit": "提交",
|
||
"Submit results": "提交结果",
|
||
"SubSeed": "第二种子",
|
||
"subseed": "差异随机种子",
|
||
"Subseed schedule": "第二种子调度计劃",
|
||
"Subseed strength schedule": "第二种子强度调度计劃",
|
||
"subtract": "减去",
|
||
"Suffix": "後缀名",
|
||
"Suggested weight": "建议权重",
|
||
"Sum": "和",
|
||
"sum Twice:(A*(1-alpha)+B*alpha)*(1-beta)+C*beta": "两次求和: (A*(1-α)+B*α)*(1-β)+C*β",
|
||
"Super Mario": "Super Mario (超级马里奥)",
|
||
"superfast": "超级快",
|
||
"SuperMerger": "超级融合器",
|
||
"Supported engines:": "支援的引擎：",
|
||
"Supports boolean operations: (! - negation, & - and, | - or, ^ - xor, - difference, () - nested operations)": "支援布尔运算：（！-否定/取反，&-与，|-或，^-异或，\\-差分，()-嵌套操作）",
|
||
"Supports boolean operations: (! - negation, & - and, | - or, ^ - xor, \\ - difference, () - nested operations)": "支援布尔运算：（！-否定/取反，&-与，|-或，^-异或，\\-差分，()-嵌套操作）",
|
||
"Surrealist": "Surrealist (超现实主义-哲学)",
|
||
"SVD": "SVD-影片生成",
|
||
"Swap axes": "互换坐标轴",
|
||
"Swap Batch": "交换批次",
|
||
"Swap hotkey combinations for Zoom and Adjust brush resize": "交换缩放和调整画笔大小的热键组合",
|
||
"Swap Negative Prompt": "交换反向提示词",
|
||
"Swap Prompt": "交换提示词",
|
||
"Swap Sample Faces": "交换 Sample Faces",
|
||
"Swap Size": "重叠交换尺寸",
|
||
"Swap Steps": "交换叠代步数",
|
||
"Swap X/Y axes": "交换 X/Y 轴",
|
||
"Swap X/Z axes": "交换 X/Z 轴",
|
||
"swap XY": "互换 XY 轴",
|
||
"Swap Y/Z axes": "交换 Y/Z 轴",
|
||
"Swipe left/right navigates to the next image": "左右滑动时导览到下一张图像",
|
||
"Switch at": "切换於",
|
||
"Switch background color by clicking the Enable buttons in SD Web UI": "透过在网页使用者介面中点击启用按钮来切换背景颜色。",
|
||
"Switch negative prompt between Native language and English": "切换反向提示词显示语言 (母语/英语)",
|
||
"Switch prompt between Native language and English": "切换提示词显示语言 (母语/英语)",
|
||
"switch to another model in the middle of generation": "在生成中途切换的另一个模型",
|
||
"Switch to Inpaint Upload": "發送到 重绘遮罩",
|
||
"Switch to refiner by sampling steps instead of model timesteps. Old behavior for refiner.": "根据採样迭代步数 (而不是模型时间步数) 来判断切换到 Refiner 的时机, 此为 Refiner 旧版行为",
|
||
"Switch width/height": "互换宽高值",
|
||
"symbol:color-hex, symbol:color-hex, ...": "文字:颜色程式码, 文字:颜色程式码, ...",
|
||
"symbolism": "symbolism (象徵主义)",
|
||
"Sync with Default SD checkpoint": "与预设 SD 模型同步",
|
||
"Synchronize with main seed": "与主随机数种子同步",
|
||
"Syntax cheatsheet": "语法速查表",
|
||
"Sysinfo": "系统资讯",
|
||
"system": "系统",
|
||
"System": "系统",
|
||
"System data": "系统资讯",
|
||
"System Info": "系统资讯",
|
||
"System: peak amout of video memory allocated by all running programs, out of total capacity": "系统：所有执行程序分配的显存峰值，占总容量的百分比",
|
||
"T2I-Adapter": "T2I-Adapter (文生图)",
|
||
"T2IA": "T2IA (自适应)",
|
||
"t2ia_color_grid": "t2ia_color_grid (文本到图像自适应控制 - 色彩像素化)",
|
||
"t2ia_sketch_pidi": "t2ia_sketch_pidi (文本到图像自适应控制 - 草绘边缘像素差分)",
|
||
"t2ia_style_clipvision": "t2ia_style_clipvision (文本到图像自适应控制 - 风格迁移)",
|
||
"tab": "页籤",
|
||
"Tab": "Tab (制表符)",
|
||
"Tag": "标籤",
|
||
"Tag Autocomplete": "标记自动补齐",
|
||
"Tag confidences": "标籤置信度",
|
||
"Tag confidents": "标籤置信度",
|
||
"Tag file output format. Leave blank to use same filename or e.g. \"[name].[hash:sha1].[output_extension]\". Also allowed are [extension] or any other [hash:<algorithm>] supported by hashlib": "标籤档案输出格式。留空以使用相同档名或以下範例。“[name].[hash:sha1].[output_extension]”。同时允许使用 [extension] 或 hashlib 支援的任何其他 [hash:<algorithm>] 算法。",
|
||
"Tag filename": "标记档档名",
|
||
"Tag images": "多图打标",
|
||
"Tag one image": "单图打标",
|
||
"Tagger": "WD 1.4 标籤器",
|
||
"Tagging": "打标",
|
||
"Tagging Confidence Threshold": "标籤置信度阈值",
|
||
"Tags": "标记",
|
||
"tags from the images displayed.": "显示图像的标籤",
|
||
"Tags To Ignore": "要忽略的标记",
|
||
"Take the focus off the prompt when working with a canvas": "使用画布时, 将焦点从提示词上移开",
|
||
"Target": "目标",
|
||
"Target ControlNet models": "目标 ControlNet 模型",
|
||
"Target ControlNet number": "目标 ControlNet 号码",
|
||
"Target dataset num: ": "目标数据集数量：",
|
||
"Target face : Comma separated face number(s)": "目标脸部: 使用逗号分隔脸部序号",
|
||
"Target Folder": "目标目录",
|
||
"Target language": "目标语言",
|
||
"Target Language": "目标语言",
|
||
"Target size type": "图像尺寸类型",
|
||
"Target tokens (comma separated)": "分隔目标提示词(逗号分隔)",
|
||
"Task History": "任务历史",
|
||
"Task Id": "任务 ID",
|
||
"Task Queue": "任务伫列",
|
||
"Tattoo": "纹身",
|
||
"Techwear Fashion": "Techwear Fashion (科技时尚-服装)",
|
||
"temparature": "色温",
|
||
"temperature": "色温",
|
||
"template": "模板",
|
||
"Templates": "模板",
|
||
"Temporal-Warp": "Temporal 修复",
|
||
"TENC Gradient Clip Norm": "裁剪文本编码器 (TENC/CLIP) 梯度归一层",
|
||
"TEnc Weight 1": "文字编码器权重 1️⃣",
|
||
"TEnc Weight 2": "文字编码器权重 2️⃣",
|
||
"TEnc Weight 3": "文字编码器权重 3️⃣",
|
||
"TEnc Weight 4": "文字编码器权重 4️⃣",
|
||
"TEnc Weight 5": "文字编码器权重 5️⃣",
|
||
"TENC Weight Decay": "文本编码器 (TENC/CLIP) 权重衰减",
|
||
"TensorRT Exporter": "TensorRT 汇出",
|
||
"TensorRT Extension": "TensorRT 扩展",
|
||
"TensorRT uses optimized engines for specific resolutions and batch sizes. You can generate as many optimized engines as desired. Types:": "TensorRT 对特定解析度和批次数量使用最佳化引擎。可以根据需要生成任意数量的最佳化引擎。类型：",
|
||
"Tertiary model": "模型 C",
|
||
"Tertiary model (C)": "第三模型（C）",
|
||
"Tertiary model (C): refresh": "模型 C: 刷新",
|
||
"Test a base prompt with different checkpoints and for the checkpoints specific prompt templates ": "使用不同的检查点和检查点特定的提示词模板测试基本提示词 ",
|
||
"Test prompt": "测试提示词",
|
||
"TEST-MAX-ALL": "全部测试",
|
||
"Testing": "测试",
|
||
"Text": "文字",
|
||
"Text CFG": "文本引导系数(CFG)",
|
||
"Text color for image grids": "网格图文本颜色",
|
||
"Text data view": "文本数据检视",
|
||
"Text Editor": "文本编辑器",
|
||
"text encoder": "文本编码器",
|
||
"Text Encoder Learning Rate": "文本编码器 (TE/CLIP) 学习率 (LR)",
|
||
"Text file for each image": "对应每个图像的文本档案",
|
||
"Text files directory (optional, will load from input dir if not specified)": "文本档案目录 (可选, 如不指定将从输入目录载入)",
|
||
"Text files directory (Optional, will load from input dir if not specified)": "文本档案目录 (可选, 如不指定将从输入目录载入)",
|
||
"Text input": "文本输入",
|
||
"text2prompt": "文生提示词",
|
||
"Text2Prompt": "文生提示词",
|
||
"Textbox": "文字方块",
|
||
"textile": "textile (纺织艺术)",
|
||
"Textual Inversion": "文本反转（Textual Inversion）",
|
||
"TextualInversion": "Textual Inversion (嵌入式 T.I. Embedding)",
|
||
"Texture": "Texture (纹理)",
|
||
"th_TH Localization": "泰语本地化语言包",
|
||
"Thai localization": "泰语本地化",
|
||
"The": "这个 ",
|
||
"The \"Export Default Engines\" selection adds support for resolutions between 512x512 and 768x768 for Stable Diffusion 1.5 and 768x768 to 1024x1024 for SDXL with batch sizes 1 to 4.": "“汇出预设引擎” 选新增了对 Stable Diffusion 1.5 中 512x512 和 768x768 的解析度支援，以及单批数量 1 - 4 的 SDXL 768x768 和 1024x1024 的解析度支援。",
|
||
"The 1st and last keyframe images should match.": "第一个和最後一个关键帧图像应该符合。",
|
||
"the 2D vanishing point of perspective (rec. range 30-160)": "2D 透视消失点 (rec. 範围: 30-160)",
|
||
"The algorithm is not able to enhance all images.": "本演算法不能增强所有图像",
|
||
"The algorithm used to generate noise used in the diffusion process.": "扩散过程中用於产生噪点的演算法。",
|
||
"The alpha schedule controls overall alpha for video mix, whether using a composite mask or not.": "半透明调度计劃控制影片混合的整体透明度, 无论是否使用合成遮罩",
|
||
"The annotator directory inside the SAM extension directory is only a symbolic link. This is to save your space and make the extension repository clean.": "SAM 扩展目录中的解释器目录只是符号网址。这样能够节省你的硬盘空间，并使扩展库更加有序。",
|
||
"The beta1 parameter for the Adam optimizer.": "Adam 最佳化器的 beta1 参数",
|
||
"The beta2 parameter for the Adam optimizer.": "Adam 最佳化器的 beta2 参数",
|
||
"The Classifier-Free Guidance Scale to use for classifier/regularization images.": "用於分类/正则化图像的无分类器引导系数 (CFG Scale - 无分类器引导系数(Classifier-Free Guidance Scale))",
|
||
"The Classifier-Free Guidance Scale to use for preview images.": "用於生成预览图像的无分类器引导系数。",
|
||
"The code for this extension:": "此扩充功能的程式码：",
|
||
"The current workflow is [text prompt]->[object detection]->[segmentation]. Semantic segmentation support is in Auto SAM panel.": "目前的工作流是 [文本提示词]->[物件检测]->[语义分割]。语义分割支援在自动 SAM 面板中。",
|
||
"The denoising curve controls the rate of denoising strength change each loop. Aggressive: Most of the change will happen towards the start of the loops. Linear: Change will be constant through all loops. Lazy: Most of the change will happen towards the end of the loops.": "降噪曲缐控制每个迴圈中降噪强度的变化率。Aggressive（激进）：大部分的变化会發生在迴圈的开始。Linear（缐性）：变化会在所有迴圈中保持恆定。Lazy（懒惰）：大部分的变化会發生在迴圈的结尾。",
|
||
"The denoising strength for the final loop of each image in the batch.": "每个批次中每张图像的最後迴圈的重绘幅度。",
|
||
"The difference between the last two models will be added to the first. Requires three models; A, B and C. The result is calculated as A + (B - C) * M": "後两个模型的差值将叠加在主要模型上。需要输入 A、B、C 三个模型。计算公式为 A + (B - C) * M",
|
||
"the directory / URL at which your video file is located for Video Input mode only": "影片档案所在的目录/网址，仅适用於影片输入模式",
|
||
"The directory containing classification/regularization images.": "包含分类/正则化图像的目录",
|
||
"The directory containing training images.": "包含训练图像的目录",
|
||
"the directory in which your mask video is located.": "影片遮罩所在目录",
|
||
"The existing prompt and negative prompt fields are ignored.": "会使现有的正向提示词和反向提示词段被忽略。",
|
||
"The following will only affect reference face image (and is not affected by sort by size) :": "以下选项会仅影响参考的脸部图像 (且不受影响大小排序影响)",
|
||
"The frames per second that the video will run at": "影片的每秒播放帧数",
|
||
"The generated file is a slugified version of the prompt and can be found in the same directory as the generated images.\nE.g. in ./outputs/txt2img-images/.": "产生的档案包含處理过的提示词，和产生的图像在同一目录。\n例如 ./outputs/txt2img-images/",
|
||
"The Guided images mode exposes the following variables for the prompts and the schedules:": "图像引导模式为提示词和调度计劃提供以下变数：",
|
||
"The height of the output images, in pixels (must be a multiple of 64)": "输出图像的高度（像素）（必须能整除於 64）",
|
||
"The learning rate scheduler to use.": "要使用的学习率调度器",
|
||
"The learning rate scheduler to use. All schedulers use the provided warmup time except for 'constant'. For dadapt_with_warmup it 10% total steps is recommended. You may need to add additional epochs to compensate.": "所用的学习率调度器。所有调度器使用预设的预热时间 (除 ‘constant’ 外) 。对於自带预热的 dadapt ，推荐设定为总步数的 10% 。可能需要增加额外的 Epoches 进行补偿。",
|
||
"the location of images to create the video from, when use_manual_settings is checked": "当 使用手动设定 选项选中时, 用於建立影片的图像位置",
|
||
"the maximum number of output images to be created": "所需要生成的最大输出图像数",
|
||
"The maximum number of tokens for the output of the model": "模型输出的最大token数",
|
||
"The model to train.": "要训练的模型",
|
||
"The name of the model to create.": "要建立的模型的名称",
|
||
"The number of Perlin noise octaves, that is the count of P-noise iterations. Higher values will make the noise more soft and smoke-like, whereas lower values will make it look more organic and spotty. It is limited by 8 octaves as the resulting gain will run out of bounds.": "柏林噪点倍频程数，即柏林噪点迭代次数。数值越大，噪点越柔和，越像烟雾；数值越小，噪点越有机，越有斑点。最大限制为 8 倍频程，因为更高倍数产生的增益将超出範围。",
|
||
"The number of prompts to generate per batch. Increasing this can speed up prompt generation at the expense of slightly increased VRAM usage.": "每个批次要产生的提示词数量。增加此数量可以加快提示词产生速度，但会略微增加 VRAM 的使用。",
|
||
"The number of results to generate. Not guaranteed if models fails to create them": "生成的提示词批数，部分批次可能会生成失败",
|
||
"The number of steps per image (Epoch) to train the text encoder for. Set 0.5 for 50% of the epochs": "每幅图像训练文本编码器 (TE/CLIP) 的步数。设定 0.5 相当於 50% 的 Epochs 。",
|
||
"The number of steps to use when generating classifier/regularization images.": "生成分类/正则化图像时使用的步数。",
|
||
"The number of times the script will inference your image and increase the resolution in increments. The amount the resolution is increased each loop is determined by this number and the maximum image width/height. The more loops, the more chances of your image picking up more detail, but also artifacts. 4 to 10 is what I find to work best, but you may like more or less.": "脚本将推断图像并逐步增加解析度的次数。 每个循环增加的解析度量由这个数字和最大图像宽度/高度决定。 循环次数越多，图像获得更多细节的机会就越大，但也会出现伪影。 4 到 10 为推荐数值，可按照需求调节。",
|
||
"The official port of Deforum, an extensive script for 2D and 3D animations, supporting keyframable sequences, dynamic math parameters (even inside the prompts), dynamic masking, depth estimation and warping.": "Deforum 的官方移植，一个用於 2D 和 3D 动画的延伸模组指令码，支援关键帧序列、动态数学参数（甚至可用於提示词内）、动态遮罩、深度预测和变形",
|
||
"The other site allows for making keyframes using": "另一个网站允许使用",
|
||
"the pan effect angle": "偏移效果角度",
|
||
"The parameter for repetition penalty. 1.0 means no penalty. Default setting is 1.2. Paper explaining it is linked to Github's readme": "重複惩罚的参数。 1.0 表示没有處罚。 预设设定为 1.2。 它的说明参考 Github 的readme档案",
|
||
"the path to a custom settings file": "自订设定档案的路径",
|
||
"The path to a txt file to use for sample prompts. Use [filewords] or [name] to insert class token in sample prompts": "用於生成样本图像的 txt 文本档案路径。使用 [filewords] 或 [name] 以在样本图像提示词中插入类别词元",
|
||
"The path to the concepts JSON file, or a JSON string.": "储存概念的 JSON 档案的路径，或 JSON 字串。",
|
||
"the path to your init image": "初始化图像的路径",
|
||
"the path to your mask image": "遮罩档案的路径",
|
||
"the path/ URL to an audio file to accompany the video": "影片附带的音讯档案的路径 / 网址",
|
||
"The position in postprocess at which this script will be executed; 0 means it will be executed before any scripts, 99 means it will probably be executed last.": "本脚本在後處理程序中的执行时机; 0 意味着在所有脚本之前执行, 99 意味着可能在最後执行",
|
||
"The process of creating a video can be divided into the following stages.": "创作影片需要以下幾个步骤。",
|
||
"The prompt to use to generate a sample image": "用於生成样本图像的正向提示词",
|
||
"The prompt to use when generating preview images.": "用於生成预览图像的提示词。",
|
||
"The rate at which the model learns. Default is 0.000005. Use a lower value like 0.000002 or 0.000001 for more complex subjects...like people.": "模型的学习速率。预设为 0.000005。对於更複杂的主体......比如人物，使用较低的值，如 0.000002 或 0.000001",
|
||
"The rate at which the model learns. Default is 2e-6. For optimizers with D-Adaptation recommended learning rate is 1.0": "模型的学习速度。预设设定为 2e-6 。若使用 D-Adaptation 的最佳化器，推荐学习率设定为 1.0 。",
|
||
"the required timestamp to reference when resuming. Currently only available in 2D & 3D mode, the timestamp is saved as the settings .txt file name as well as images produced during your previous run. The format follows: yyyymmddhhmmss - a timestamp of when the run was started to diffuse.": "恢复时需要指定的时间戳。目前仅支援在 2D 和 3D模式中可用，该时间戳在中断之前的图像生成过程中所储存的 settings.txt 中。参数格式如下: yyyymmddhhmmss - 开始执行本延伸模组时会自动生成一个时间戳",
|
||
"The resolution of input images. When using bucketing, this is the maximum size of image buckets.": "输入图像的解析度。启用切分图像时，这也是图像切分的最大尺寸。",
|
||
"The resolution of input images. You probably want to pre-process them to match this.": "输入图像的解析度。你可能希望对它们进行预處理以符合它",
|
||
"The results are stored in timestamp_prompts.txt.": "将结果储存在 timestamp_prompts.txt 中。",
|
||
"the roll effect angle": "所旋转的角度（X轴，一般性指水平）",
|
||
"The search term that determines the inpainting mask": "决定重绘遮罩的搜寻条件",
|
||
"The seed to use when generating samples. Set to -1 to use a random seed every time.": "生成样本时使用的随机数种子。设定为 -1 随机使用种子。",
|
||
"The seed to use when generating the validation sample image. -1 is not supported.": "生成验证样本图像时使用的种子。不能设定 -1。",
|
||
"the seed value will increment by 1 for each subsequent frame of the animation": "动画每完成一帧，种子值都将以 1 递增。",
|
||
"the seed will remain fixed across all frames of animation": "动画中所有帧的随机种子将被固定",
|
||
"the seed will remain fixed across all frames of animation. **NOT RECOMMENDED.** Unless you know what you are doing, it will *deep fry* the pictures over time": "种子将在动画的所有帧生成中保持不变。 **不推荐** 除非你确切知道自己在做什麼, 随着时间的推移，图像会像 ”烧焦“ 一样。",
|
||
"The smaller this value, the narrower the keyframe spacing, and if set to 0, the keyframes will be equally spaced at the value of [Minimum keyframe gap].": "这个值越小，关键帧的间隔就越小，如果设定为0，关键帧的间隔将与[最小关键帧间隔]的值相同。",
|
||
"The source checkpoint to extract for training.": "用於训练的要提取的源模型(ckpt)",
|
||
"the tilt effect angle": "所翻转的垂直角度（Y轴）",
|
||
"The type of memory attention to use. 'Xformers' will provide better performance than flash_attention, but requires a separate installation.": "启用的记忆体注意力类型。\"Xformers\" 比 \"flash attention\" 性能更好，但需要单独安装。",
|
||
"The untranslated characters will be translated automatically and will not affect the old translations. Use the function in the lower right corner to easily check and quickly modify the current translation.1,Save the setting;2,Click start button;3,Reload your browser.": "未被翻译的字句将会自动翻译且不会影响原有的翻译。使用右下角的功能来简单的检视并快速编辑正确的翻译：1. 储存设定 2. 点选开始按钮 3. 重新载入 UI",
|
||
"The URL to the model on huggingface. Should be in the format of 'developer/model_name'.": "Huggingface 模型的 URL。格式应为 'developer/model_name'。",
|
||
"The WebSocket is currently": "WebSocket 当前状态为",
|
||
"The weight decay for the Text Encoder. Values closer to 0 closely match your training dataset, and values closer to 1 generalize more and deviate from your training dataset. Default is 1e-2. For Dreambooth, recommended value is same as AdamW Weight Decay. For Lora recommended value is 0.01-0.02 higher than AdamW Weight Decay.": "文本编码器的权重衰减。越接近 0 的值越和训练数据集符合，而越接近 1 的值则越泛化且偏离训练数据集。预设 1e-2。对於 Dreambooth 推荐设定的值和 AdamW 权重衰减相同。对於 Lora，推荐设定的值比 AdamW Weight Decay 高 0.01-0.02 。",
|
||
"the whole folder, generated before, not just the output folder": "提前建立好的整个工程目录，而不仅仅是输出目录",
|
||
"The width of the focus region in pixels": "对焦区域的宽度 (单位: 像素)",
|
||
"The width of the output images, in pixels (must be a multiple of 64)": "输出图像的宽度（像素，必须能整除於 64）",
|
||
"then use": "然後使用",
|
||
"There are a lot of special things build in, based on various research papers. Just try it, and let it surprise you.": "根据各种研究论文建置了许多特殊效果。儘管试一下，让它给你带来惊喜。",
|
||
"There are an immense number of image types, not only paintings and photo's, but also isometric renders and funko pops.\nYou can however, overwrite it with the most popular ones.": "大量的图像类型，不仅有画作和照片，还有 等距/等轴渲染 和 Funko Pops (玩具人偶) 。\n不过你可以用最流行的图像类型覆盖它。",
|
||
"There is *no* Batch mode like in vanilla deforum. Please Use the txt2img tab for that.": "本延伸模组没有批處理模式，请使用文生图页籤",
|
||
"These can be used to add textual inversion and LoRA’s. They can also be used to add your models trigger words.": "这裡用来新增 嵌入式(T.I. Embedding) 和 LoRA 。同样可以用来新增模型触發词。",
|
||
"These parameters are checkboxes that apply a PIL Image Filter to the final image.": "这些参数是将 PIL 图像过滤器应用於最终图像的複选框",
|
||
"These parameters are sliders that adjust the sharpness, brightness, color, and contrast of the image. 1 will result in no adjustments, less than one reduces these settings for the final image and greater than 1 increases these settings.": "这些参数调整图像的锐度、亮度、色调和对比度。 1 将不做调整，小於 1 会减少效果，大於 1 会增加效果。",
|
||
"These parameters set the maximum width and height of the final image. Always start with an image smaller than these dimensions. The smaller you start, the more impressive the results. I usually start at either 340x512 or 512x768": "这些参数设定最终图像的最大宽度和高度。初始图像应始终小於这些尺寸。初始图越小，结果变化越大。（作者）通常从 340x512 或 512x768 开始",
|
||
"Thick Layered Papercut": "Thick Layered Papercut (厚层剪纸)",
|
||
"Thigh": "大腿长度",
|
||
"Third column (reference) image": "第三列 (参考) 图像",
|
||
"This can add multiple pose characters, detect pose from image, save to PNG, and send to controlnet extension.": "可添加多个姿势角色，从图像中检测姿势，储存为 PNG 并發送到 ControlNet 扩充功能。",
|
||
"This extension works well with text captions in comma-separated style (such as the tags generated by DeepBooru interrogator).": "使用以逗号分隔的标籤会让延伸模组更好的工作。（比如由 DeepBooru 反推生成的标籤）",
|
||
"This fork for auto1111's webui github.com/deforum-art/deforum-for-automatic1111-webui": "此克隆用於 auto1111 的 webui github.com/deforum-art/deforum-for-automatic1111-webui",
|
||
"This generator will generate a complete full prompt for you, based on randomness. You can increase the slider, to include more things to put into the prompt. \nRecommended is keeping it around 3-7. Use 10 at your own risk.": "本生成器会根据随机等级为你生成一段完整的提示词。可以通过滑块提高数值，以在提示词中包含更多的东西。\n建议保持在3-7左右。使用10的话後果自负。",
|
||
"This is a technique to reduce memory usage by clearing activations of certain layers and recomputing them during a backward pass. Effectively, this trades extra computation time for reduced memory usage.": "一种通过清除部分层的启用并在反向传播时重新计算来减少显存使用量的技术。实际是用额外的计算时间换取更少的显存使用量。",
|
||
"This is an extra stage.": "这是一个额外的步骤。",
|
||
"This is Extension for rewriting Inpainting conditioning mask strength value relative to Denoising strength at runtime. This is useful for Inpainting models such as sd-v1-5-inpainting.ckpt": "这是在执行时重新实作的区域重绘图像调节遮罩强度（相对於重绘强度）的扩充功能。这对於区域重绘专用的模型（例如 sd-v1-5-inpainting.ckpt）很有用",
|
||
"This is ignored if neither batch run or ebsynth are checked": "如果批量處理或 Ebsynth 模式都没有被选中，此项将被忽略",
|
||
"This is the total number of training steps that will be performed on each instance image.": "在每张图像上执行的训练步数总数。",
|
||
"This is your models list.": "这是您的模型列表。",
|
||
"this link": "这个网址",
|
||
"This mode works ONLY with 2D/3D animation modes. Interpolation and Video Input modes aren't supported.": "此模式仅适用於2D/3D动画模式。不支持帧插值和影片输入模式。",
|
||
"This option generates unique hashes for models that were not downloaded with this extension.\nA hash is required for any of the options below to work, a model with no hash will be skipped.\nInitial hash generation is a one-time process per file.": "此选项对其他未使用此扩展下载的模型生成唯一的杂凑值；\n以下所有选项都需要杂凑值才能工作，没有杂凑值的模型将被跳过；\n初始杂凑生成是每个档案的一次性过程。",
|
||
"this option renders N times before the final render. it is suggested to lower your steps if you up your redo. seed is randomized during redo generations and restored afterwards": "在最终渲染前进行 N 次渲染。如果增加重做次数，建议降低迭代步数。随机数种子在重做过程中被随机化，并在重做後被恢复。",
|
||
"this option takes twice as long because it generates twice in order to capture the optical flow from the previous image to the first generation, then warps the previous image and redoes the generation": "该选项需要两倍生成时间，因为它会生成两次图像，以捕获从上一幅图像到第一次生成的光流，接着变形上一幅图像并重新生成",
|
||
"This page allows you to add some settings to the main interface of txt2img and img2img tabs.": "本页面允许自订新增部分设定到文生图和图生图页籤中的主介面",
|
||
"This page allows you to change default values in UI elements on other tabs.": "本页面允许你去修改其他页籤中的 UI 预设设定",
|
||
"This panel is for those who want to upload mask to ControlNet inpainting. It is not part of the SAM feature. It might be removed someday when ControlNet support uploading image and mask. It serves as a temporarily workaround to overcome the unavailability of image with mask uploading feature in ControlNet extension.": "此面板是为想把遮罩上传到 ControlNet 重绘的人准备的。这不是 SAM 的功能。当某天 ControlNet 支援上传图像和遮罩时，此功能可能会删除。这是一个临时解决方案，以解决 ControlNet 不能上传遮罩的问题。",
|
||
"This preset affects?": "该预设中包含？",
|
||
"This regular expression will be used extract words from filename, and they will be joined using the option below into label text used for training. Leave empty to keep filename text as it is.": "此正则表达式将用於从档案名中提取单词，并将使用以下选项将它们接合到用於训练的标记文本中。留空以保持档案名文本不变",
|
||
"This requires Controlnet 1.1 extension and the tile resample model, install this if you haven't\nIn settings for Controlnet, enable \"Allow other script to control this extension\"": "这需要 ControlNet 1.1 延伸模组和 tile resample 预處理器对应的模型，如果没有请安装！\n在设定页面的 ControlNet 设定中启用 ”允许其他脚本控制此扩展“ 。",
|
||
"This requires the Ultimate SD Upscale extension, install this if you haven't": "这需要 Ultimate SD Upscale 延伸模组，如果没有请安装！",
|
||
"This script is deprecated. Please use the full Deforum extension instead.": "此脚本已废弃。请改用完整的 Deforum 扩展。",
|
||
"This SD extension allows you to turn posts from various image boorus into stable diffusion prompts. It does so by pulling a list of tags down from their API. You can copy-paste in a link to the post you want yourself, or use the built-in search feature to do it all without leaving SD.": "这个 SD 延伸可以将各种图像 boorus 的文章转换为稳定扩散提示。它通过从API下载标籤列表来完成此操作。您可以自行複製贴上您想要的文章的网址，或使用内置的搜寻功能在不离开 SD 的情况下完成所有操作。",
|
||
"This setting changes the amount of resolution increase per loop, keeping the changes from being linear. The higher the value the more significant the resolution changes toward the end of the looping.": "此设定会更改每次循环的解析度增加量，以避免缐性变化。值越高，解析度在循环结束时的变化就越大。",
|
||
"This setting will increase or decrease the denoising strength every loop. A higher value will increase the denoising strength, while a lower value will decrease it. A setting of 1 keeps the denoising strength as it is set on the img2img settings.": "此设定将增加或减少每个循环的降噪强度。较高的值会增加降噪强度，较低的值会降低降噪强度。设定为 1 会沿用图生图设定中的降噪强度。",
|
||
"This string will be used to join split words into a single line if the option above is enabled.": "如果启用了上述选项，则此處的字元会用於将拆分的单词接合为同一行",
|
||
"this subreddit": "此页面",
|
||
"This text is used to rotate the feature space of the imgs embs": "此文本用於旋转图集嵌入的特徵空间",
|
||
"This was originally a bug in the first release when using multiple batches, now brought back as a feature.\nRaised by redditor drone2222, to bring this back as a toggle, since it did create interesting results. So here it is.": "这原本是第一个版本中使用多批次时的一个 bug ，现在作为一个功能回归。\n由 redditor: drone2222提出，让它作为一个切换选项功能回归，因为它确实创造了有趣的结果。就是这样一个功能。",
|
||
"This way, you can create unlimited variants of a subject.": "通过这种方法，你可以建立同一个主题的无数变种图像。",
|
||
"This way, you don’t ever have to add it manually again. This file won’t be overwritten during upgrades.": "通过这个方法，就不需要每次都手动新增。这个档案不会在本延伸模组更新时被覆盖。",
|
||
"This Will Override Selected Style": "启用会覆盖已选择的样式",
|
||
"This will produce one prompt for each colour in the wildcard.txt file.": "会为 colours.txt 中的每个颜色产生一条提示词",
|
||
"This will produce the following prompts:": "会产生下列提示词",
|
||
"This will produce three prompts, one for each color. The prompt tag is used to mark the text that will be used as the prompt. If no prompt tag is present then only one prompt is assumed": "会产生三条提示词，每个颜色各一条；\n 提示词标籤用於标记作为提示词的文字；\n 如果没有提示词标籤则预设为仅一条提示词",
|
||
"This will randomly choose one of the three colors.": "会随机从三种颜色中选一个",
|
||
"Those settings are heavy on DOM modification and might conflict with some others extensions": "这些设定对 DOM 修改程度很大, 可能与其他扩展衝突",
|
||
"threshold": "阈值",
|
||
"Threshold": "阈值",
|
||
"Threshold (Use only when basis is absolute)": "阈值 (仅在基准设为绝对时可用)",
|
||
"Threshold A": "阈值 A",
|
||
"Threshold B": "阈值 B",
|
||
"Threshold of delta frame edge": "关键帧间隔差异阈值",
|
||
"Threshold Percentile": "阈值百分比",
|
||
"Threshold schedule": "阈值调度计劃",
|
||
"Threshold Value Lower": "阈值下限",
|
||
"Threshold Value Upper": "阈值上限",
|
||
"Thresholding Mode": "阈值模式",
|
||
"thumbs": "缩略检视",
|
||
"tile": "分块",
|
||
"Tile": "Tile (分块)",
|
||
"Tile Batch Size": "分块单批数量",
|
||
"Tile count:": "卡片显示数量: ",
|
||
"tile division BG Removers": "分块化背景去除",
|
||
"tile height": "分块高度",
|
||
"Tile height": "图块高度",
|
||
"Tile Height": "分块高度",
|
||
"Tile overlap": "图块重叠的画素",
|
||
"Tile Overlap": "分块重叠",
|
||
"Tile overlap for DAT upscalers.": "DAT 超解析度的分块重叠像素大小",
|
||
"Tile overlap for ESRGAN upscalers.": "ESRGAN 超解析度的分块重叠像素大小",
|
||
"Tile overlap for SCUNET upscalers.": "SCUNET 超解析度的分块重叠像素大小",
|
||
"Tile overlap, in pixels for ESRGAN upscalers. Low values = visible seam.": "ESRGAN 超解析度的分块重叠像素大小。数值越低意味着分块间的接缝越明显",
|
||
"Tile overlap, in pixels for SCUNET upscalers. Low values = visible seam.": "SCUNET 超解析度的分块重叠像素大小。数值越低意味着分块间的接缝越明显",
|
||
"Tile overlap, in pixels for SwinIR. Low values = visible seam.": "SwinIR 的图块重叠画素。较小时可见接缝",
|
||
"Tile Size": "分块尺寸",
|
||
"Tile size for all SwinIR.": "适用所有 SwinIR 系演算法的图块尺寸",
|
||
"Tile size for DAT upscalers.": "DAT 超解析度使用的分块尺寸",
|
||
"Tile size for ESRGAN upscalers.": "ESRGAN 超解析度使用的分块尺寸",
|
||
"Tile size for ESRGAN upscalers. 0 = no tiling.": "ESRGAN 使用的分块尺寸 。数值设为0意味着不分块",
|
||
"Tile size for SCUNET upscalers.": "SCUNET 超解析度的分块尺寸",
|
||
"Tile size for SCUNET upscalers. 0 = no tiling.": "SCUNET 超解析度的分块尺寸。数值设为0意味着不分块",
|
||
"Tile size:": "卡片大小: ",
|
||
"tile width": "分块宽度",
|
||
"Tile width": "图块宽度",
|
||
"Tile Width": "分块宽度",
|
||
"Tile/Blur": "Tile/Blur (分块/模糊)",
|
||
"tile_colorfix": "tile_colorfix (分块 - 固定颜色)",
|
||
"tile_colorfix+sharp": "tile_colorfix+sharp (分块 - 固定颜色 + 锐化)",
|
||
"tile_gaussian": "Tile_Gaussian (分块 - 高斯模糊處理)",
|
||
"tile_resample": "tile_resample (分块 - 重採样)",
|
||
"Tiled VAE": "分块 VAE",
|
||
"Tiling": "可平铺",
|
||
"tiling": "可平铺",
|
||
"Tiling direction": "分块方向",
|
||
"Tilt adjustment threshold": "俯仰调节阈值",
|
||
"tilt canvas up/down in degrees per frame": "以每帧为单位向上/向下倾斜画布",
|
||
"Tilt shift": "移轴 (镜头)",
|
||
"Tilt-Shift": "Tilt-Shift (移轴)",
|
||
"Time": "时间",
|
||
"Time in ms to wait before triggering completion again": "再次显示自动补全标籤的等待时间 (单位: 毫秒)",
|
||
"Time in ms to wait before triggering completion again (Requires restart)": "在再次触發完成之前等待的毫秒数（需要储存设定并重新启动）",
|
||
"Time period:": "时间範围: ",
|
||
"Time Period:": "时间範围: ",
|
||
"Time taken:": "用时：",
|
||
"timestamp": "时间戳",
|
||
"Tips": "小提示",
|
||
"title": "标题",
|
||
"Title": "职位",
|
||
"to": "至",
|
||
"to (full path)": "到 (输入完整路径)",
|
||
"To apply, go to quick set. Save now works immediately in other tab without restart, filters out non-common between tabs.": "要套用，请转到快速设定。现在储存可以立即在其他页籤中工作，无需重新启动，过滤掉页籤之间的不常见内容。",
|
||
"to discuss about Cozy Nest": "去讨论关於 Cozy Nest 的话题~",
|
||
"To enable seed schedule select seed behavior — 'schedule'": "要启用种子调度，请选择随机种子行为——“调度”",
|
||
"To enable, check use_mask in the Init tab": "如需启用，请检查是否启用初始化页籤中的 启用遮罩 选项",
|
||
"To first difference": "补全到首次差异",
|
||
"to fix the issue.": "修复",
|
||
"To Generate Your Prompt in All Available Styles, Its Better to set batch count to 43 ( Style Count)": "以所有的可用的样式生成提示词，最好把总批次数设定为 43 （目前样式总数）",
|
||
"To Generate Your Prompt in All Available Styles, Its Better to set batch count to 77 ( Style Count)": "以所有的可用的样式生成提示词，最好把总批次数设定为 77 （目前样式总数）",
|
||
"To Language": "翻译为：",
|
||
"To next folder level": "补全到下一级目录",
|
||
"to read the documentation of each parameter.": "阅读关於各参数的说明。",
|
||
"to see which words are constructed using multiple sub-words, e.g. 'computer' doesn't exist in stable diffusion's CLIP dictionary and instead 'compu' and 'ter' are used (1 word but 2 embedding vectors). Currently buggy and needs a moment to process before pressing the button. If it doesn't work after a moment, try adding a random space to refresh it.": "检视哪些词是使用多个子词构成的，例如 Stable Diffusion 的 CLIP 字典中不存在 'computer'，而是使用 'compu' 以及 'ter'（一个单字但使用两个嵌入向量）。目前这个扩充功能还有点问题，在按下按钮之前需要一点时间来處理。如果过了一段时间还是不行，试试随便加个空格重新整理一下",
|
||
"to see which words are constructed using multiple sub-words, e.g. 'computer' doesn't exist in stable diffusion's CLIP dictionary and instead 'compu' and 'ter' are used (1 word but 2 Embedding vectors). Currently buggy and needs a moment to process before pressing the button. If it doesn't work after a moment, try adding a random space to refresh it.": "检视哪些词是使用多个子词构成的，例如 Stable Diffusion 的 CLIP 字典中不存在 'computer'，而是使用 'compu' 以及 'ter'（1 个单词但使用 2 个 Embedding 向量）。目前这个扩展还有点问题，在按下按钮之前需要一点时间来處理。如果过了一会还是不行，试试随便加个空格刷新一下",
|
||
"to share your creations and suggestions.": "来分享您的创作和建议。",
|
||
"to understand following options.": "以理解下方选项。",
|
||
"To use an alternate VAE, you can specify the path to a directory containing a pytorch_model.bin representing your VAE.": "若要使用其他 VAE ，可以指定一个包含代表 VAE 的 pytorch_model.bin 目录的路径。",
|
||
"Toggle overlap": "重叠切换",
|
||
"Token": "词元",
|
||
"Token Length": "词元长度",
|
||
"Token Merging": "高分修复TOME",
|
||
"Token Merging (ToMe)": "词元合併 (ToMe)",
|
||
"Token Merging - Max downsample": "TOME - 最大降採样",
|
||
"Token Merging - Ratio": "TOME 合併比率",
|
||
"Token merging ratio": "Token 合併比率",
|
||
"Token merging ratio for high-res pass": "高分层的 Token 合併比率",
|
||
"Token merging ratio for img2img": "图生图的 Token 合併比率",
|
||
"Tokenize": "标记拆分",
|
||
"tokenizer": "标记解析器",
|
||
"Tokenizer": "标记解析器",
|
||
"Tokens": "标记",
|
||
"ToMe for Hires. fix": "为高解析度修复启用 Tokens 合併最佳化",
|
||
"ToMe max. tokens": "Token 合併最大词元数",
|
||
"ToMe merge ratio": "Token 合併比率",
|
||
"ToMe Merging Ratio": "ToMe 合併比率",
|
||
"ToMe seed": "Token 合併随机数种子",
|
||
"Tone Curve": "色调曲缐",
|
||
"Tonemap Method": "色调映射演算法",
|
||
"Tonemap Multiplier": "色调映射倍数",
|
||
"Tonemap Percentile": "色调映射百分比",
|
||
"Toolkit": "模型工具箱",
|
||
"Tools": "工具",
|
||
"top": "顶部",
|
||
"top-bottom": "上 - 下",
|
||
"Top/Bottom Balance": "上/下平衡",
|
||
"top_centered": "顶部居中",
|
||
"Torch active: Peak amount of VRAM used by Torch during generation, excluding cached data.\nTorch reserved: Peak amount of VRAM allocated by Torch, including all active and cached data.\nSys VRAM: Peak amount of VRAM allocation across all applications / total GPU VRAM (peak utilization%).": "Torch active： 在生成过程中，Torch使用的显存(VRAM)峰值，不包括缓存的数据。\nTorch reserved： Torch 分配的显存(VRAM)的峰值量，包括所有活动和缓存数据。\nSys VRAM： 所有应用程式分配的显存(VRAM)的峰值量 / GPU 的总显存(VRAM)（峰值利用率%）",
|
||
"torch GPU test": "Torch GPU 测试",
|
||
"total": "总计",
|
||
"Total Images": "图像总数",
|
||
"Total num of layers (reload required)": "图层总数 (需要重启)",
|
||
"Total num of point for curve (reload required)": "曲缐点总数 (需要重启)",
|
||
"Total Number of Class/Reg Images": "用於分类/规范化的图像总数",
|
||
"Total number of classification images to use. Set to 0 to disable.": "要使用的分类 (classification) 图像总数。设定为 0 以停用",
|
||
"Total number of classification/regularization images to use. If no images exist, they will be generated. Set to 0 to disable prior preservation.": "要使用的分类/正则化图像总数。如果没有图像，就生成一些。设定为 0 以停用先验存留(prior preservation)",
|
||
"Total number of training steps to perform. If provided, overrides num_train_epochs.": "要执行的训练迭代步数总数。如果填了，则覆盖 '训练多少期(num_train_epochs)'",
|
||
"Total video length [s]": "影片总长度[秒]",
|
||
"Towards Controllable One-Shot Text-to-Image Generation via Contrastive Prompt-Tuning.": "通过对比调整提示词，实作可控的一次性文字档案到图像生成",
|
||
"tr_TR Localization": "土耳其语本地化语言包",
|
||
"Trace each layers": "追蹤每个层级",
|
||
"Traditional Chinese localization": "正体中文本地化",
|
||
"Traditional Chinese localization (mixin zh_TW and zh_Hans)": "繁体中文（zh_Hant）语言包（合併 zh_TW 与 zh_Hans 语言包已翻译的内容来让介面有更多中文说明）",
|
||
"Train": "训练",
|
||
"Train an embedding or Hypernetwork; you must specify a directory with a set of 1:1 ratio images": "训练嵌入或者超网路；必须指定一个具有一组 1:1 比例图像的目录",
|
||
"Train an embedding; must specify a directory with a set of 1:1 ratio images": "训练 Embedding； 必须指定一组具有 1:1 比例图像的目录",
|
||
"Train base model": "训练底模",
|
||
"Train EMA": "训练 EMA",
|
||
"Train embedding": "训练嵌入式模型",
|
||
"Train Embedding": "训练嵌入",
|
||
"Train hypernetwork": "训练超网络",
|
||
"Train Hypernetwork": "训练超网路",
|
||
"Train Imagic Only": "仅意象训练",
|
||
"Train Inpainting Model": "训练区域重绘模型",
|
||
"Train Model": "训练模型",
|
||
"Train multiple concepts from a JSON file or string.": "从 JSON 档案或字串训练多个概念。",
|
||
"Train number of repetitions": "训练重複次数",
|
||
"Train Text Encoder": "训练文本编码器",
|
||
"Train U-Net": "训练 U-Net",
|
||
"Train UNET": "训练 UNET",
|
||
"Train with DreamArtist": "使用梦想家（DreamArtist）训练",
|
||
"Train with reconstruction": "训练时开启重建",
|
||
"Trained tags (if any):": "训练标籤 (如有): ",
|
||
"Trained Tags (if any):": "训练标籤 (如有): ",
|
||
"training": "训练",
|
||
"Training": "训练",
|
||
"Training dataset tags": "训练数据集标记",
|
||
"Training Epochs": "训练多少期(Epochs)",
|
||
"Training info": "训练资讯",
|
||
"Training parameters": "训练参数",
|
||
"Training Picker": "训练图挑选器",
|
||
"Training Prompts": "训练提示词",
|
||
"Training steps": "训练迭代步数",
|
||
"Training Steps": "训练迭代步数",
|
||
"Training Steps Per Image (Epochs)": "每张图像的训练步数（训练週期）",
|
||
"Training Wizard (Object/Style)": "训练嚮导（物件 / 样式）",
|
||
"Training Wizard (Person)": "训练嚮导（人物）",
|
||
"training-picker": "训练图挑选器",
|
||
"Trajectory": "运动轨迹",
|
||
"Transform Center X": "旋转中心点 X 轴",
|
||
"Transform Center Y": "旋转中心点 Y 轴",
|
||
"Transformer": "变换器",
|
||
"Transition Smoothness": "过渡平滑程度",
|
||
"translate": "翻译",
|
||
"Translate": "翻译",
|
||
"Translate Negative Prompt": "翻译反向提示词",
|
||
"translate negative prompt.": "翻译反向提示词。",
|
||
"Translate Prompt": "翻译提示词",
|
||
"Translate prompt words into:": "将提示词翻译为：",
|
||
"translate prompt.": "翻译提示词。",
|
||
"Translate: x, y, z": "移动幅度：x, y, z",
|
||
"translated fail:": "翻译失败：",
|
||
"Translated Negative Prompt": "反向提示词翻译",
|
||
"Translated Prompt": "提示词翻译",
|
||
"Translated Status": "翻译状态",
|
||
"translated text": "翻译",
|
||
"Translated Text": "翻译文字",
|
||
"Translation display order": "翻译显示顺序",
|
||
"Translation file uses old 3-column translation format instead of the new 2-column one": "翻译档使用旧的三栏位翻译格式，而非新的两栏位格式",
|
||
"Translation filename": "翻译档档名",
|
||
"Translation First": "翻译优先",
|
||
"Translation Service Setting": "翻译服务设定",
|
||
"Translation X": "平移 X",
|
||
"Translation Y": "平移 Y",
|
||
"Translation Z": "平移 Z",
|
||
"Transparent": "透明",
|
||
"Transparent PNG": "透明PNG",
|
||
"transparent-background": "透明背景",
|
||
"transparent-background AND clipseg": "透明背景和 CLIP 分割",
|
||
"transparent-background options": "透明背景选项",
|
||
"Travel mode": "变迁模式",
|
||
"Travel steps between stages": "每个阶段变迁的迭代步数",
|
||
"Treat card description as HTML": "将卡片描述视作 HTML",
|
||
"Treat LoCon's as LORA's": "将 LoCon 视为 LORA ",
|
||
"Tree": "Tree (树状)",
|
||
"Tribal": "Tribal (部落民族)",
|
||
"Trigger Word": "触發词",
|
||
"Trim mask by sketch": "根据草图修剪遮罩",
|
||
"Triple sum:A*(1-alpha-beta)+B*alpha+C*beta": "三重加权和: A*(1-α-β)+B*α+C*β",
|
||
"True": "是",
|
||
"Truncate tags by token count": "按词元长度截断标籤",
|
||
"Truncate tags by token count.": "按词元长度截断标籤",
|
||
"Try to add known trigger words for LORA/LyCO models": "尝试为 LoRA/LyCORIS 模型新增已知触發词",
|
||
"Tuning": "调整",
|
||
"Turkish localization": "土耳其语本地化",
|
||
"Turn on pin_memory for DataLoader. Makes training slightly faster but can increase memory usage.": "对 DataLoader 开启 pin_memory。使训练略快，但可能会增加记忆体使用量。",
|
||
"Turn the depthmap into absolute black/white": "转换深度图为纯黑或纯白",
|
||
"turn_page_switch": "翻页开关",
|
||
"Tutorial": "教学",
|
||
"Tweening frames schedule": "中间计算帧调度计劃",
|
||
"txt2img": "文生图",
|
||
"TXT2IMG": "文生图",
|
||
"txt2img history": "文生图历史记录",
|
||
"txt2img-grids": "文生图网格",
|
||
"txt2img/img2img UI item order": "文生图 / 图生图 UI 项目顺序",
|
||
"txt2img_extra_sort_order": "文字转图像额外排序顺序",
|
||
"Type": "类型",
|
||
"type of image": "图像类型",
|
||
"Typography": "Typography (字体排印)",
|
||
"U-Net features": "U-Net 特征值",
|
||
"ua_UA Localization": "乌克兰语本地化语言包",
|
||
"UI alternatives": "UI 替代方案",
|
||
"UI Component order": "UI 组件排序",
|
||
"UI Default global post processing face restorer visibility (requires restart)": "UI 预设全域後期處理脸部修复可见程度 (需重启)",
|
||
"UI Default global post processing face restorer (requires restart)": "UI 预设全域後期處理脸部修复模型 (需重启)",
|
||
"UI Default global post processing face restorer weight (requires restart)": "UI 预设全域後期處理脸部修复权重 (需重启)",
|
||
"UI Default global post processing upscaler (requires restart)": "UI 预设全域後期處理放大演算法 (需重启)",
|
||
"UI Default global post processing upscaler visibility(requires restart)": "UI 预设全域後期處理放大演算法强度 (需重启)",
|
||
"UI Default inpainting negative prompt [gender] (requires restart)": "UI 预设重绘 [性别] 反向提示词 (需重启)",
|
||
"UI Default inpainting prompt [gender] is replaced by man or woman (requires restart)": "UI 预设重绘 [性别] 提示词取代为男性或女性 (需重启)",
|
||
"UI item order for txt2img/img2img tabs": "文生图/图生图 介面元素顺序",
|
||
"UI related": "使用者介面相关",
|
||
"UI tab order": "标籤列元素顺序",
|
||
"ui text": "使用者介面文字",
|
||
"UI theme": "UI 主题",
|
||
"ukiyo-e": "ukiyo-e (浮世绘)",
|
||
"Ukrainian localization": "乌克兰语本地化",
|
||
"Ultimate SD Upscale": "终极 SD 放大",
|
||
"Ultimate SD upscale": "终极 SD 放大",
|
||
"ultrafast": "极致速度",
|
||
"ultrawide": "ultrawide (超宽图)",
|
||
"Uncategorized": "未分类",
|
||
"Uncatgorized": "未分类",
|
||
"Uncheck all copies": "取消勾选所有选择",
|
||
"Underscore replacement excludes (split by comma)": "下劃缐取代排除项 (逗号分隔)",
|
||
"Undo": "重做",
|
||
"Unet Learning rate": "Unet 模型的学习率",
|
||
"UNet Weight 1": "UNet 权重 1️⃣",
|
||
"UNet Weight 2": "UNet 权重 2️⃣",
|
||
"UNet Weight 3": "UNet 权重 3️⃣",
|
||
"UNet Weight 4": "UNet 权重 4️⃣",
|
||
"UNet Weight 5": "UNet 权重 5️⃣",
|
||
"Unfreeze Model": "解冻模型",
|
||
"Unfreeze seed": "不固定种子",
|
||
"Unfreezes model layers and allows for potentially better training, but makes increased VRAM usage more likely.": "解冻模型分层来获得更好的训练效果，但更有可能只是单纯增加显存的使用量。",
|
||
"Unified Predictor-Corrector Framework for Fast Sampling of Diffusion Models": "统一的预测校正框架用於快速採样扩散模型",
|
||
"Uniform noise covers the entire frame. It somewhat flattens and sharpens the video over time, but may be good for cartoonish look. This is the old default setting.": "均匀噪点覆盖整个画面。随着时间的推移，它会在一定程度上使视频变得平滑和锐利，但也许适合卡通效果。曾是旧版本的预设设定。",
|
||
"UniPC": "UniPC（可，10步，快）",
|
||
"UniPC lower order final": "UniPC 最终步採用低阶取样。",
|
||
"UniPC order": "UniPC 低阶步数",
|
||
"UniPC Order": "UniPC 取样顺序。",
|
||
"UniPC order (must be < sampling steps)": "UniPC 的预测校正次数 (需小於採样步数)",
|
||
"UniPC skip type": "UniPC 跳过类型",
|
||
"UniPC variant": "UniPC 变体",
|
||
"unknown": "未知",
|
||
"Unlink seed from prompt": "将随机种子与提示词解绑",
|
||
"Unload": "卸载",
|
||
"Unload all interrogate models": "卸载所有反推模型",
|
||
"Unload all models from memory": "从记忆体中卸载所有模型",
|
||
"unload model": "卸载模型",
|
||
"Unload model": "卸载模型",
|
||
"Unload Model": "卸载模型",
|
||
"Unload model after running": "反推完成後卸载模型",
|
||
"Unload model to free VRAM": "卸载模型以释放显存",
|
||
"Unload models": "卸载模型",
|
||
"Unload SD checkpoint to free VRAM": "卸载模型权重存档点以释放 VRAM",
|
||
"Unload SD checkpoint to RAM": "卸载 SD 模型到记忆体中",
|
||
"Unload VAE and CLIP from VRAM when training": "训练时从显存中卸载 VAE 和 CLIP 模型",
|
||
"Unnecessary Javascript file": "多馀的 Javascript 档案",
|
||
"Unprompted": "非文本（程式码化）提示词",
|
||
"Unprompted Seed": "Unprompted 随机数种子",
|
||
"Unprompted Template Editor": "Unprompted 模板编辑器",
|
||
"Unused": "未使用",
|
||
"unzip the file to": "将档案解压缩到",
|
||
"up": "上",
|
||
"Upcast cross attention layer to float32": "将交叉注意层升级为 float32",
|
||
"Upcast cross attention layer to FP32": "将交叉关注层向上转换到 FP32",
|
||
"update": "更新",
|
||
"Update": "更新",
|
||
"Update All Tags": "更新所有标籤",
|
||
"Update assigned tags": "更新已选标籤的模型",
|
||
"Update Dataset": "上传数据集",
|
||
"Update directory names in database": "更新数据库中的目录名字",
|
||
"Update Extension and Restart": "更新扩充并重新启动",
|
||
"Update image generation information (Experimental)": "更新图像生成资讯 (实验性)",
|
||
"Update installed extensions": "更新已安装扩展",
|
||
"Update instructions:": "更新指引：",
|
||
"update list": "更新列表",
|
||
"Update Mask": "更新遮罩",
|
||
"Update model info & tags": "更新模型资讯和标籤",
|
||
"Update model preview": "更新模型预览",
|
||
"Update Models": "更新模型",
|
||
"Update Parameters": "更新参数",
|
||
"Update Selected Tags": "更新所选项目的标籤",
|
||
"Update tags for:": "为所选项目更新标籤: ",
|
||
"update time": "按更新时间",
|
||
"Updated At": "更新于",
|
||
"Upload GIF": "上传 GIF",
|
||
"Upload image": "上传图像",
|
||
"Upload Image or .cni file": "上传图像或 .cni 档案",
|
||
"Upload Images": "上传图像",
|
||
"Upload independent control image": "上传独立的控制图像",
|
||
"Upload mask": "上传遮罩图像",
|
||
"Upload mask here cus gradio": "在此上传遮罩",
|
||
"Upload mask image": "上传遮罩图像",
|
||
"Upload Mask to ControlNet Inpainting": "上传遮罩到 ControNet 重绘",
|
||
"Upload OR TTS": "上传音讯或 TTS",
|
||
"Upload prompt inputs": "上传提示词输入档案",
|
||
"uploaded video FPS": "上传影片的帧率",
|
||
"uploaded video resolution": "上传影片的解析度",
|
||
"uploaded video total frame count": "上传影片的总帧数",
|
||
"Uploading...": "上传中...",
|
||
"Upper Arm": "上臂长度",
|
||
"Upper limit for X": "X 值上限",
|
||
"Upscale": "图像放大",
|
||
"Upscale and Resize": "放大并缩放比例",
|
||
"Upscale Before Restoring Faces": "放大後再进行脸部修复",
|
||
"Upscale by": "放大至",
|
||
"Upscale factor": "放大倍数",
|
||
"Upscale height": "放大高度",
|
||
"Upscale height to": "将高度放大到",
|
||
"Upscale image normally, split result into tiles, improve each tile using img2img, merge whole image back": "正常放大图像，将结果分割成分块(tiles)，用图生图改进每个图块，最後将整个图像合併回来",
|
||
"Upscale image with IMG2IMG": "通过图生图放大图像",
|
||
"Upscale latent space image when doing hires. fix": "做高解析度修复时，也放大潜空间图像",
|
||
"Upscale masked region to target resolution, do inpainting, downscale back and paste into original image": "将遮罩区域（包括预留像素长度的缓衝区域）放大到目标解析度，进行区域重绘。\n然後缩小并贴上回原始图像中",
|
||
"Upscale method": "放大方法",
|
||
"Upscale Method": "放大演算法",
|
||
"Upscale model": "超分模型",
|
||
"upscale output imgs when run is finished": "执行结束後放大输出图像",
|
||
"Upscale ratio": "放大比率",
|
||
"Upscale Ratio": "放大比例",
|
||
"Upscale resize": "放大倍数",
|
||
"Upscale width": "放大宽度",
|
||
"Upscale width to": "将宽度放大到",
|
||
"Upscaled": "储存 SD 放大的图像",
|
||
"Upscaled swapper mask erosion factor, 1 = default behaviour.": "放大变换的遮罩腐蚀系数，1 = 预设行为",
|
||
"Upscaler": "放大演算法",
|
||
"upscaler 1": "放大演算法 1",
|
||
"Upscaler 1": "放大演算法 1",
|
||
"upscaler 2": "放大演算法 2",
|
||
"Upscaler 2": "放大演算法 2",
|
||
"Upscaler 2 vis.": "放大演算法 2 可见程度",
|
||
"Upscaler 2 visibility": "放大演算法 2 可见度",
|
||
"Upscaler for img2img": "图生图的放大演算法",
|
||
"Upscaler scale": "放大倍数",
|
||
"Upscaler visibility (if scale = 1)": "放大强度（如果倍率=1）",
|
||
"Upscaling": "放大",
|
||
"Upscaling is performed on the whole image and all faces (including not swapped). Upscaling happens before face restoration.": "对整个图像和所有脸部 (包括未变换的脸部) 进行放大。放大在脸部修复之前进行",
|
||
"URL": "网址",
|
||
"URL for extension's git repository": "扩充功能的 git 储存库网址",
|
||
"Usage guide": "使用指南",
|
||
"Uscale the image in latent space. Alternative is to produce the full image from latent representation, upscale that, and then move it back to latent space.": "放大潜空间中的图像。而另一种方法是，从潜变数表达中直接解码并生成完整的图像，接着放大它，然後再将其编码回潜空间",
|
||
"Use": "使用 ",
|
||
"Use \"Maximum dimension\" for aspect ratio buttons (by default we use the max width or height)": "使用 “最大尺寸” 作为纵横比按钮 (预设使用最大宽度或最大高度)",
|
||
"Use 8bit Adam": "使用 8bit Adam",
|
||
"use 256/512 model?": "使用 256 或 512 解析度模型？",
|
||
"Use a": "启用一个",
|
||
"Use a grayscale image as a mask on your init image. Whiter areas of the mask are areas that change more.": "在初始化图像上使用灰度图像作为遮罩。遮罩区域中越接近白色变化越大",
|
||
"Use a two step process to partially create an image at smaller resolution, upscale, and then improve details in it without changing composition": "使用两步處理的时候，以较小的解析度生成初步图像，接着放大图像，然後在不更改构图的情况下改进其中的细节",
|
||
"Use A1111 resize mode when input is from A1111.": "当输入图来自 A1111 时，使用 A1111 的缩放模式",
|
||
"Use alpha as mask": "启用透明度遮罩",
|
||
"Use an": "使用一个",
|
||
"Use an empty output directory to save pictures normally instead of writing to the output directory.": "输出图像到一个空目录，而非设定裡指定的输出目录。",
|
||
"Use another image as ControlNet input": "使用另外的图像输入 ControlNet",
|
||
"Use another image as mask": "使用另外的图像作为遮罩",
|
||
"Use automatic height for gallery (requires Gradio >= 3.36.0)": "启用画廊自动高度 (需要 Gradio 版本 >= 3.36.0)",
|
||
"Use base prompt": "使用基础提示词 (Base Prompt)",
|
||
"Use batch input directory as image source": "使用档案目录批量汇入图像源",
|
||
"Use blacklist?": "启用黑名单",
|
||
"Use BLIP for caption": "使用 BLIP 产生描述（自然语言描述）",
|
||
"Use brush": "使用画笔",
|
||
"Use cache": "使用缓存",
|
||
"Use checkbox to enable the extension; it will be enabled or disabled when you click apply button": "勾选要启用的扩充功能并按下套用以启用，取消勾选则停用",
|
||
"Use checkbox to mark the extension for update; it will be updated when you click apply button": "勾选要更新的扩充功能并按下套用以更新",
|
||
"Use color corrections": "使用色彩校正",
|
||
"Use common negative prompt": "使用常见反向提示词 (Common Negative Prompt)",
|
||
"Use common prompt": "使用常见提示词 (Common Prompt)",
|
||
"Use Concepts List": "使用概念列表",
|
||
"Use Control Net inpaint model": "使用 ControlNet 的 inpait 模型",
|
||
"Use CPU": "使用 CPU",
|
||
"Use CPU for SAM": "使用 CPU 进行 SAM 處理",
|
||
"Use CPU Only (SLOW)": "只用 CPU (很慢)",
|
||
"Use cross attention optimizations while training": "训练时开启 cross attention 最佳化",
|
||
"Use custom colors": "使用自订颜色",
|
||
"Use custom DepthMap": "使用自订深度图",
|
||
"Use Custom Threshold (Booru)": "使用自订阈值 (Booru)",
|
||
"Use Custom Threshold (WDv1.4 Tagger)": "使用自订阈值 (WDv1.4 标籤器)",
|
||
"Use deepbooru for caption": "使用 deepbooru 产生描述（标记）",
|
||
"Use delta values for movement parameters": "使用增量值作为运动参数",
|
||
"Use Depth Map If exists in /video_key_depth": "使用深度图（如果存在/video_key_depth目录）",
|
||
"Use depth warping": "启用深度变形",
|
||
"Use different seed for each picture": "对每张图像使用不同的种子",
|
||
"Use different seeds for images along X axis.": "为 X 轴的每张图像使用不同随机种子",
|
||
"Use different seeds for images along Y axis.": "为 Y 轴的每张图像使用不同随机种子",
|
||
"Use different seeds for images along Z axis.": "为 Z 轴的每张图像使用不同随机种子",
|
||
"Use dropdown for sampler selection instead of radio group": "使用下拉式选单代替单选群组选择取样器",
|
||
"Use dropout": "採用 dropout 防止过拟合",
|
||
"Use EMA": "使用 EMA",
|
||
"Use EMA for finetuning": "使用 EMA 权重进行微调",
|
||
"Use EMA for prediction": "使用 EMA 进行预测",
|
||
"Use EMA Weights for Inference": "使用EMA权重进行推论",
|
||
"use Face Crop img2img": "使用图生图脸部修复",
|
||
"Use Fast Mode(It will be faster, but the quality of the mask will be lower.)": "使用快速模式（它会更快，但遮罩品质会较低）。",
|
||
"Use following tags to define how filenames for images are chosen: [steps], [cfg], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; leave empty for default.": "使用以下标籤选择如何定义图像的档名： [steps], [cfg], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; 预设请留空",
|
||
"Use following tags to define how filenames for images are chosen: [steps], [cfg], [prompt_hash], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [model_name], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; leave empty for default.": "使用以下标籤选择如何定义图像的档名: [steps], [cfg], [prompt_hash], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [model_name], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; 预设请留空.",
|
||
"Use following tags to define how subdirectories for images and grids are chosen: [steps], [cfg], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]; leave empty for default.": "使用以下标籤定义如何选择图像和网格图的子目录： [steps], [cfg], [prompt], [prompt_no_styles], [prompt_spaces], [width], [height], [styles], [sampler], [seed], [model_hash], [prompt_words], [date], [datetime], [datetime<Format>], [datetime<Format><Time Zone>], [job_timestamp]。预设请留空",
|
||
"Use FP16 or BF16 (if available) will help improve memory performance. Required when using 'xformers'.": "使用 FP16 或 BF16 (如可用) 有助於提高记忆体性能。启用 \"xformers\" 时需要。",
|
||
"Use GPU": "使用 GPU",
|
||
"Use GPU, only for CUDA on Windows/Linux - experimental and risky, can messed up dependencies (requires restart)": "使用 GPU, 仅限 Windows/Linux 上使用 CUDA - 实验中且高风险, 可能损坏相依 (需要重启)",
|
||
"Use grid (output to grid dir)": "使用网格（输出到网格目录）",
|
||
"Use half floats": "启用半精度浮点",
|
||
"Use Hash from Metadata (May have false-positives but can be useful if you've pruned models)": "使用元数据中的杂凑 (可能会有误报，但对已修剪的模型很有用)",
|
||
"Use improved segmented mask (use pastenet to mask only the face)": "使用改良的分离遮罩 (通过 pastenet 仅标记脸部)",
|
||
"Use init": "启用初始化",
|
||
"Use init image as video": "使用初始图像作为影片",
|
||
"Use init image instead of video. Doesn't require generation of inputframes.": "使用初始图像代替影片。无需生成输入帧",
|
||
"Use inpaint width/height": "启用自订重绘宽高",
|
||
"Use input image's alpha channel as mask": "使用输入图像的透明度通道作为遮罩",
|
||
"Use Interrogator Caption": "使用反推打标",
|
||
"Use Jit": "使用实时产出模式",
|
||
"Use kohya-ss's finetuning metadata json": "使用 kohya-ss 的微调 metadata json",
|
||
"Use layers as row instead of Batch Length": "将图层作为行而非批次长度使用",
|
||
"Use local groundingdino to bypass C++ problem": "启用本地 Groundingdino 以绕过 C++ 问题",
|
||
"Use local HTML file for model info": "使用本地 HTML 档案作为模型资讯",
|
||
"Use LORA": "使用 LoRA",
|
||
"Use LORA directory for LoCon's": "LoCon 使用 LORA 目录",
|
||
"Use Lora Extended": "使用 LoRA 扩充功能（Locon）",
|
||
"Use Lora in uc diffusion model": "在反向提示词的diffusion model使用LoRA",
|
||
"Use Lora in uc text model encoder": "在反向提示词的text model encoder使用LoRA",
|
||
"Use lossless compression for webp images": "对 webp 图像使用无损压缩",
|
||
"Use LyCoris handler for all Lora types": "使用 LyCORIS 處理器载入所有 Lora 模型",
|
||
"Use main sampler": "使用文生图採样方法",
|
||
"Use mask": "启用遮罩",
|
||
"Use Mask": "使用遮罩",
|
||
"Use mask as output alpha channel": "使用遮罩作为透明度通道输出",
|
||
"Use mask video": "使用影片遮罩",
|
||
"use MBW": "使用分块合併",
|
||
"use Merge Block Weights": "使用分块合併",
|
||
"Use mid-control on highres pass (second pass)": "进行高解析度修复时使用中间层控制 (mid-control)",
|
||
"Use mid-layer control on highres pass (second pass)": "进行高清修复时使用中间层控制(mid-control)",
|
||
"Use minimal area (for close faces)": "使用最小区域（适用近處的脸）",
|
||
"Use minimal area for face selection": "用最小面积进行脸部选择",
|
||
"Use model EMA weights when possible": "尽可能使用模型 EMA 权重",
|
||
"Use negative embedding (DreamArtist)": "使用反向 Embedding (梦作家)",
|
||
"Use noise mask": "启用噪点遮罩",
|
||
"Use old aspect ratio formula": "使用旧版纵横比格式",
|
||
"Use old emphasis implementation. Can be useful to reproduce old seeds.": "使用旧的强调符实作。可用於复现旧随机种子",
|
||
"Use old karras scheduler sigmas (0.1 to 10).": "使用旧的 karras 调度器 sigma（0.1 至 10）",
|
||
"Use old prompt editing timelines.": "使用旧的提示词时间分布表达式",
|
||
"Use only-mid-control on high-res. fix (second pass)": "在高解析度修复 (第二通道) 中仅使用中间层 (mid-control) 控制",
|
||
"use optical flow estimation for your in-between (cadence) frames": "对中间 (间隔) 帧启用光流估计",
|
||
"Use optimized images in the thumbnail interface (significantly reduces the amount of data transferred)": "在缩略图介面中使用最佳化的图像 (显着减少传输数据量)",
|
||
"Use original name for output filename during batch process in extras tab": "在更多页籤中的批量處理过程中，使用原始名称作为输出档案名",
|
||
"Use output of nth layer from back of text encoder (n>=1)": "使用文本编码器 (TE/CLIP) 後第 n 层的输出 (n>=1)",
|
||
"Use PNG alpha channel as loss weight": "使用 PNG 透明通道作为损失权重",
|
||
"Use Preprocess image If exists in /controlnet_preprocess": "使用预處理图像（如果存在/controlnet_preprocess目录）",
|
||
"use prompt and setting by image": "按图像资讯使用提示词和设定",
|
||
"Use prompt from preview image": "一键使用本模型预览图所使用的提示词",
|
||
"Use punctuation?": "使用标点符号",
|
||
"Use random seeds for sub-generations when doing a rolling generation (WARNING!!! The result will be non-deterministic!!!)": "在进行梯度放大倍数生成时, 对子代生成套用随机种子 (警告!!! 图像结果随机无法复现!!!)",
|
||
"Use raw CLIP token to calculate token count (without emphasis or embeddings)": "使用原始 CLIP 词元数计算词元长度（不含 emphasis 或 embeddings）",
|
||
"Use recursive with glob pattern": "使用 glob 模式递迴搜寻",
|
||
"Use recycle bin when deleting images": "删除图像时丢入资源回收桶",
|
||
"Use regex": "使用正则表达式",
|
||
"Use Riffusion model to produce music in gradio. To replicate original interpolation technique, input the prompt travel extension output frames into the riffusion tab.": "使用 Riffusion 模型在 gradio 中产生音乐。要重现原始插值技巧，请将提示旅行延伸模组输出帧输入到 Riffusion 页面中。",
|
||
"Use same checkpoint": "使用相同 SD 模型",
|
||
"Use same random seed for all lines": "每行输入都使用同一个随机种子",
|
||
"Use same sampler": "使用相同採样方法",
|
||
"Use same seed for all images": "为所有图像使用同一个随机种子",
|
||
"Use same VAE": "使用相同 VAE",
|
||
"use scale": "启用缩放",
|
||
"Use SD webui's built-in hashing functions for model hashes. If SD webui was launced with `--no-hashing`, hashing will fail, but this provides a hash cache, which should make repeat model scanning faster.": "模型使用 SD WebUI 内建的杂凑函式。若使用 “--no-hashing” 指令启动 SD WebUI，计算杂凑会失败；但 WebUI 提供杂凑缓存，使重複扫描更快速",
|
||
"Use SD webui's built-in hashing functions for model hashes. This provides a hash cache, which should make repeat model scanning faster and make hashes reusable across features.": "模型杂凑使用 SD WebUI 内建的杂凑函式。这可作为一份杂凑缓存跨功能复用，使重複模型扫描更快速",
|
||
"Use separate CFG scale": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 2nd": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 3rd": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 4th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 5th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 6th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 7th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 8th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 9th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 10th": "使用独立的提示词引导系数",
|
||
"Use separate checkpoint": "使用独立模型",
|
||
"Use separate checkpoint 2nd": "使用独立模型",
|
||
"Use separate checkpoint 3rd": "使用独立模型",
|
||
"Use separate checkpoint 4th": "使用独立模型",
|
||
"Use separate checkpoint 5th": "使用独立模型",
|
||
"Use separate checkpoint 6th": "使用独立模型",
|
||
"Use separate checkpoint 7th": "使用独立模型",
|
||
"Use separate checkpoint 8th": "使用独立模型",
|
||
"Use separate checkpoint 9th": "使用独立模型",
|
||
"Use separate checkpoint 10th": "使用独立模型",
|
||
"Use separate CLIP skip": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 2nd": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 3rd": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 4th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 5th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 6th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 7th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 8th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 9th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 10th": "使用独立 CLIP 终止层数",
|
||
"Use separate noise multiplier": "使用独立噪点参数",
|
||
"Use separate noise multiplier 2nd": "使用独立噪点参数",
|
||
"Use separate noise multiplier 3rd": "使用独立噪点参数",
|
||
"Use separate noise multiplier 4th": "使用独立噪点参数",
|
||
"Use separate noise multiplier 5th": "使用独立噪点参数",
|
||
"Use separate noise multiplier 6th": "使用独立噪点参数",
|
||
"Use separate noise multiplier 7th": "使用独立噪点参数",
|
||
"Use separate noise multiplier 8th": "使用独立噪点参数",
|
||
"Use separate noise multiplier 9th": "使用独立噪点参数",
|
||
"Use separate noise multiplier 10th": "使用独立噪点参数",
|
||
"Use separate sampler": "使用独立採样方法",
|
||
"Use separate sampler 2nd": "使用独立採样方法",
|
||
"Use separate sampler 3rd": "使用独立採样方法",
|
||
"Use separate sampler 4th": "使用独立採样方法",
|
||
"Use separate sampler 5th": "使用独立採样方法",
|
||
"Use separate sampler 6th": "使用独立採样方法",
|
||
"Use separate sampler 7th": "使用独立採样方法",
|
||
"Use separate sampler 8th": "使用独立採样方法",
|
||
"Use separate sampler 9th": "使用独立採样方法",
|
||
"Use separate sampler 10th": "使用独立採样方法",
|
||
"Use separate steps": "使用独立迭代步数",
|
||
"Use separate steps 2nd": "使用独立迭代步数",
|
||
"Use separate steps 3rd": "使用独立迭代步数",
|
||
"Use separate steps 4th": "使用独立迭代步数",
|
||
"Use separate steps 5th": "使用独立迭代步数",
|
||
"Use separate steps 6th": "使用独立迭代步数",
|
||
"Use separate steps 7th": "使用独立迭代步数",
|
||
"Use separate steps 8th": "使用独立迭代步数",
|
||
"Use separate steps 9th": "使用独立迭代步数",
|
||
"Use separate steps 10th": "使用独立迭代步数",
|
||
"Use separate VAE": "使用独立 VAE",
|
||
"Use separate VAE 2nd": "使用独立 VAE",
|
||
"Use separate VAE 3rd": "使用独立 VAE",
|
||
"Use separate VAE 4th": "使用独立 VAE",
|
||
"Use separate VAE 5th": "使用独立 VAE",
|
||
"Use separate VAE 6th": "使用独立 VAE",
|
||
"Use separate VAE 7th": "使用独立 VAE",
|
||
"Use separate VAE 8th": "使用独立 VAE",
|
||
"Use separate VAE 9th": "使用独立 VAE",
|
||
"Use separate VAE 10th": "使用独立 VAE",
|
||
"Use separate width/height": "使用独立重绘宽高",
|
||
"Use separate width/height 2nd": "使用独立重绘宽高",
|
||
"Use separate width/height 3rd": "使用独立重绘宽高",
|
||
"Use separate width/height 4th": "使用独立重绘宽高",
|
||
"Use separate width/height 5th": "使用独立重绘宽高",
|
||
"Use separate width/height 6th": "使用独立重绘宽高",
|
||
"Use separate width/height 7th": "使用独立重绘宽高",
|
||
"Use separate width/height 8th": "使用独立重绘宽高",
|
||
"Use separate width/height 9th": "使用独立重绘宽高",
|
||
"Use separate width/height 10th": "使用独立重绘宽高",
|
||
"Use Smart-Steps": "最佳化迭代次数",
|
||
"Use Space Instead Of _": "使用 \"空格 \" 代替 \"下劃缐_\"",
|
||
"use spaces for tags in deepbooru": "在 deepbooru 中为标籤使用空格",
|
||
"Use spaces instead of underscore": "使用空格代替下劃缐",
|
||
"Use static shapes.": "使用静态形状 (固定解析度)",
|
||
"Use sub folders inside custom images location": "使用自订图像位置内的子目录",
|
||
"Use tags like [seed] and [date] to define how filenames for images are chosen. Leave empty for default.": "使用[seed]和[date]等标记来选择如何定义图像的档名。留空使用预设值",
|
||
"Use tags like [seed] and [date] to define how subdirectories for images and grids are chosen. Leave empty for default.": "使用[seed]和[date]等标记来选择如何定义图像和网格的子目录。留空使用预设值",
|
||
"Use TensorFloat 32": "使用TensorFloat 32",
|
||
"Use Text Escape": "使用文本转义",
|
||
"Use text inputs instead of dropdowns": "使用文本输入而不是下拉选单",
|
||
"Use the filter icon to filter results.": "使用筛选图标来筛选所需内容",
|
||
"Use the img2img inpainting tab.": "使用图生图区域重绘面板。",
|
||
"Use the negative_prompts field to automatically append all words as a negative prompt. *Don't* add --neg in the negative_prompts field!": "使用 negative_prompts 字段自动将所有单词附加为反向提示词，不要在 negative_prempts 字段中新增 --neg ！",
|
||
"Use the same seed for all prompts in this batch": "对这批次中的所有提示词使用相同的种子",
|
||
"Use the wildcard in your script by typing the name of the file or copying the text from the Wildcards file text box": "通过键入档名或从万用字元档案文本框中複製文本，来将万用字元应用到你的脚本中",
|
||
"Use the wildcard in your script by typing the name of the file or copying the text from the Wildcards file text box.": "通过键入档名或从 \"万用字元档案\" 文本框中複製文本来在脚本中使用万用字元",
|
||
"Use this extension to generate optimized engines and enable the best performance on NVIDIA RTX GPUs with TensorRT. Please follow the instructions below to set everything up.": "使用此扩展生成最佳化过的引擎，并在带有 TensorRT 的 NVIDIA RTX GPU 上实作最佳性能。请按照以下说明进行设定。",
|
||
"Use this negative prompt": "使用此框填写的反向提示词",
|
||
"Use this when scanning can not find a local model on civitai": "无法通过扫描获取本地模型资讯时使用此功能",
|
||
"Use torch.compile to accelerate SwinIR.": "使用 torch.compile 加速 SwinIR",
|
||
"Use transformers models to generate prompts.": "使用 transformers 模型产生提示词。",
|
||
"Use txt2img": "使用文生图",
|
||
"Use Ultimate SD Upscale script instead": "使用 Ultimate SD Upscale 脚本作为替代",
|
||
"Use Upscaled": "启用放大",
|
||
"Use upscaler name as filename suffix in the extras tab": "使用上色器名称作为附加档的档名後缀",
|
||
"Use v2 CLIP Model": "使用 v2 CLIP 模型",
|
||
"Use via API": "使用API",
|
||
"Use web address or local path. Note: if the image box below is used then this field is ignored.": "使用网页地址或者本地路径地址。注意：如果要使用下方的图像输入框，则忽略本段",
|
||
"Use wildcards for negative prompts": "对反向提示词使用万用字元",
|
||
"Use xformers": "使用 xformers",
|
||
"Used for securing the Web API. Click the refresh button to the right to (re)generate your key, the trash icon to remove it.": "用於保护 Web API 的安全。点击右侧刷新按钮可 (重新) 生成密钥，点击垃圾桶按钮可移除密钥。",
|
||
"Useful for I'm feeling lucky and Magic Prompt. If this is set, then negative prompts are not generated.": "对手气不错和魔法提示词很有用。如果设定了此项，则不会生成否定提示",
|
||
"User agent for requests": "發送请求使用的 User-Agent",
|
||
"User guide for v0.5 docs.google.com/document/d/1pEobUknMFMkn8F5TMsv8qRzamXX_75BShMMXV8IFslI/edit": "v0.5 使用者指南 docs.google.com/document/d/1pEobUknMFMkn8F5TMsv8qRzamXX_75BShMMXV8IFslI/edit",
|
||
"User interface": "使用者介面",
|
||
"User Interface": "使用者介面",
|
||
"User name": "用户名",
|
||
"username": "用户名",
|
||
"Username": "用户名",
|
||
"Uses a trained model file, produces WD 1.4 Tags. Model link - https://mega.nz/file/ptA2jSSB#G4INKHQG2x2pGAVQBn-yd_U5dMgevGF8YYM9CR_R1SY": "使用经过训练的模型档案，生成 Waifu Diffusion 1.4 标籤。模型网址 - https://mega.nz/file/ptA2jSSB#G4INKHQG2x2pGAVQBn-yd_U5dMgevGF8YYM9CR_R1SY",
|
||
"Uses aesthetic image scorer extension to check the quality of the image.": "使用 aesthetic image scorer (美学图像评分) 延伸模组来检测图像品质",
|
||
"Uses existing CLiP model with an additional small pretrained model to calculate perceived aesthetic score of an image.": "使用现有的 CLiP 模型和额外的小型预训练模型来计算图像的感知美学分数。",
|
||
"Uses Imagic for training instead of full dreambooth, useful for training with a single instance image.": "使用 Imagic 进行训练，而不是使用完整的 Dreambooth，这对单图像训练非常有效。",
|
||
"Uses Low-rank Adaptation for Fast Text-to-Image Diffusion Fine-tuning. Uses less VRAM, saves a .pt file instead of a full checkpoint": "使用低秩微调模型进行快速的文生图扩散微调。需要的显存更小，储存一个 .pt 格式的档案而不是完整的大模型。",
|
||
"Uses the filename.txt file's content as the image labels instead of the instance prompt": "使用 档名.txt 档案的内容作为图像的提示词而非实例提示词",
|
||
"Uses the image's filename as the image labels instead of the instance prompt": "使用图像的档名作为图像标籤而非实例提示词",
|
||
"Uses the lexica.art API to create random prompts.\nThe prompt in the main prompt box is used as a search string.\nLeaving the prompt box blank returns a list of completely randomly chosen prompts.\nTry it out, it can be quite fun.": "用 lexica.art API 生成随机提示词\n提示词框中的内容会作为搜寻字串\n留空提示词框会得到一组完全随机选择的提示词\n用用看，它会很有趣",
|
||
"Uses your": "使用你的",
|
||
"Using": "使用",
|
||
"Using pre-trained models, produce pixel art out of images in the extras tab.": "使用预先训练的模型，在附加标籤中将图像转换为像素艺术。",
|
||
"V2 Model:": "V2 模型：",
|
||
"VAE Checkpoints to cache in RAM": "在缓存记忆体中缓存 VAE 模型权重存档点",
|
||
"VAE Merger": "VAE 融合",
|
||
"VAE model": "VAE 模型",
|
||
"VAE type for decode": "用於解码的 VAE 类型",
|
||
"VAE type for encode": "用於编码的 VAE 类型",
|
||
"vagina-v2.6.pt": "vagina-v2.6.pt (写实 生殖器 女)",
|
||
"vagina-v3.2.pt": "vagina-v3.2.pt (写实 生殖器 女 奇幻)",
|
||
"Validate": "验证",
|
||
"value": "值",
|
||
"Value to set/add/mul": "用於 设定/新增/倍乘 的数值",
|
||
"values": "固定值",
|
||
"values are recommended!": "值更推荐！",
|
||
"Values closer to 0 closely match your training dataset, and values closer to 1 generalize more and deviate from your training dataset. Default is 1e-2, values lower than 0.1 are recommended. For D-Adaptation values between 0.02 and 0.04 are recommended": "越接近 0 的值越和训练数据集符合，而越接近 1 的值则越泛化且偏离训练数据集。预设 1e-2，推荐使用小於 0.1 的值。对於 D-Adaptation 推荐取 0.02 至 0.04 之间的值。",
|
||
"Var. seed": "差异随机种子",
|
||
"Var. strength": "差异强度",
|
||
"Variability Measure": "可变性测量",
|
||
"Variables": "变数",
|
||
"Variation seed": "差异随机种子",
|
||
"Variation strength": "差异强度",
|
||
"Variational autoencoder": "变分自编码器",
|
||
"Vary seeds for X": "X 轴 变异种子",
|
||
"Vary seeds for Y": "Y 轴 变异种子",
|
||
"Vary seeds for Z": "Z 轴 变异种子",
|
||
"Vector": "向量",
|
||
"Vector Studio": "Vector Studio - 矢量工作室",
|
||
"Vectors": "向量",
|
||
"verbose console output": "将详细资讯输出到控制台",
|
||
"version": "版本",
|
||
"Version": "版本",
|
||
"version 2.14.0 of the WebUI extension": "的 webui 扩展版本为: 2.14.0",
|
||
"version:": "版本: ",
|
||
"Version:": "版本: ",
|
||
"vertical": "垂直",
|
||
"Vertical": "垂直",
|
||
"Vertical Mirroring": "垂直镜像",
|
||
"vertical only": "仅垂直方向",
|
||
"vertical split num": "垂直分割数",
|
||
"Very cheap approximation. Very fast compared to VAE, but produces pictures with 8 times smaller horizontal/vertical resolution and extremely low quality.": "非常低负载的近似值。比 VAE 快得多，但是生成的图像横纵解析度要小 8 倍，品质非常低。",
|
||
"veryfast": "非常快",
|
||
"veryslow": "非常慢",
|
||
"Vid2depth": "影片转深度",
|
||
"Video": "视讯",
|
||
"Video above or below gallery": "影片播放器位於画廊上方或下方",
|
||
"Video Depth": "影片深度",
|
||
"Video drop last frame": "丢弃影片最後一帧",
|
||
"Video encoding": "影片编码",
|
||
"Video file format": "影片格式",
|
||
"Video FPS": "影片 FPS",
|
||
"Video Init": "影片初始化",
|
||
"Video init path": "初始化影片路径",
|
||
"Video init path/ URL": "影片初始化路径/网址",
|
||
"Video Input": "影片输入",
|
||
"Video mask path": "影片遮罩路径",
|
||
"Video Name": "影片名称",
|
||
"Video output": "影片输出",
|
||
"Video Output Settings": "影片输出设定",
|
||
"Video path": "影片路径",
|
||
"Video player height (px)": "影片播放器高度 (px)",
|
||
"Video player width (px)": "影片播放器宽度 (px)",
|
||
"Video Quality (crf)": "影片品质（CRF智能码率）",
|
||
"Video Segment Duration (seconds)": "影片片段长度（秒）",
|
||
"Video source": "视频源",
|
||
"Video to extract frames from:": "要从中提取帧的影片：",
|
||
"Video to get Depth from": "从视频中获取深度",
|
||
"Video to Interpolate": "要插值的影片",
|
||
"Video to Upscale": "待放大影片",
|
||
"Video Upscaling": "影片放大",
|
||
"video_init_path, extract_nth_frame, overwrite_extracted_frames": "影片初始化路径, 提取第N帧, 覆盖提取帧",
|
||
"video_input mode only, enables the extraction and use of a separate video file intended for use as a mask. White areas of the extracted video frames will not be affected by diffusion, while black areas will be fully effected. Lighter/darker areas are affected dynamically.": "仅 影片输入 模式使用，提取和使用单独的影片档案作为遮罩。提取的影片帧的白色区域将不受生成器的影响，而黑色区域将完全受到影响。较亮/较暗的区域会受到动态影响。",
|
||
"View changes": "检视更改",
|
||
"View Path": "检视路径",
|
||
"View Path Select": "检视路径选择",
|
||
"View saved data": "检视已储存数据",
|
||
"View the wiki for usage tips.": "点击检视 Wiki 获取使用说明",
|
||
"Vignette": "暗角",
|
||
"Visibility": "可见度",
|
||
"Visual style": "视觉风格",
|
||
"Visualize": "视觉化",
|
||
"visualize and make template": "可视化并製作模板",
|
||
"Visualize Cross-Attention": "可视化跨注意力",
|
||
"vivid_light": "强烈光缐",
|
||
"VRAM Estimator": "VRAM 估量器",
|
||
"VRAM usage polls per second during generation.": "生成图像时, 每秒查询显存 (VRAM) 使用情况的次数",
|
||
"VRAM usage polls per second during generation. Set to 0 to disable.": "生成图像时，每秒查询显存 (VRAM) 使用情况的次数。设定为 0 可停用",
|
||
"Waiting...": "等待中...",
|
||
"Want to figure out what a good prompt might be to create new images like an existing one? The CLIP Interrogator is here to get you answers!": "想知道生成类似於已有图像的新图像的最佳提示词是什麼吗？CLIP Interrogator (CLIP 反推扩展) 将给你带来答案！",
|
||
"Warmup Period": "热身时间",
|
||
"Warmup Steps": "预热步数",
|
||
"Warn if changes in caption is not saved": "在描述的更改未被储存时發出警告",
|
||
"WARNING : Settings are immediately applied but will not be saved until you click \"Save\"": "警告：设定修改後会立即套用，但在点击“储存”之前不会被储存",
|
||
"WARNING : Some visual settings are immediately applied but will not be saved until you click \"Save\"": "警告: 部分视觉设定修改後会立即套用, 但在点击 ”储存“ 之前不会被储存",
|
||
"Warning: jpeg found in output folder. Jpeg images are not supported": "警告: 在输出目录發现 Jpeg 档案。 Jpeg 图像暂不支持",
|
||
"watercolor": "watercolor (水彩)",
|
||
"Watercolor": "Watercolor (水彩)",
|
||
"Wave offset (ignore this if you don't know what it means)": "波形偏移（如果你不知道这是什麼，忽略就好）",
|
||
"Waves color": "波形颜色",
|
||
"WD 1.4 Tagger": "WD 1.4 标记器",
|
||
"WD14 ConvNeXTV2 v1": "WD14 ConvNeXTV2 v1 (稍微详细 快速 推荐)",
|
||
"WDv1.4 Tagger Score Threshold": "WDv1.4 标籤器评分阈值",
|
||
"WebSocket status": "WebSocket 状态",
|
||
"WebUI extension for ControlNet. Note: (WIP), so don't expect seed reproducibility - as updates may change things.": "ControlNet 的 WebUI 扩充功能。注意：由於仍在开發中，因此不保证种子的再现性，因为更新可能会更改内容。",
|
||
"WebUI State": "WebUI 状态",
|
||
"webui-tokenizer": "标记解析器扩充功能",
|
||
"Weight": "权重",
|
||
"Weight (0 = maximum effect, 1 = minimum effect)": "权重 (0 = 最强效果, 1 = 最弱效果)",
|
||
"Weight 1": "权重 1️⃣",
|
||
"Weight 2": "权重 2️⃣",
|
||
"Weight 3": "权重 3️⃣",
|
||
"Weight 4": "权重 4️⃣",
|
||
"Weight 5": "权重 5️⃣",
|
||
"Weight Decay": "权重衰减",
|
||
"Weight decay for the Adam optimizer, duh.": "Adam 最佳化器的权重衰减（废话）",
|
||
"Weight for cond match": "用於符合文字调节(cond)的权重",
|
||
"Weight for cond match (grad/replace-grad mode)": "用於符合文字调节(cond)的权重 (梯度/取代模式)",
|
||
"Weight for latent match": "用於匹配潜空间(latent)的权重",
|
||
"Weight for latent match (grad/replace-grad mode)": "用於匹配潜空间(latent)的权重 (梯度/取代模式)",
|
||
"Weight schedule": "权重调度计劃",
|
||
"Weight sum": "加权和",
|
||
"Weight sum:A*(1-alpha)+B*alpha": "加权和: A*(1-α)+B*α",
|
||
"Weight threshold": "权重阈值",
|
||
"Weight values": "权重值",
|
||
"Weight_values": "权重值",
|
||
"Weighted sum": "加权和",
|
||
"Weights": "权重",
|
||
"weights alpha": "权重 α",
|
||
"Weights alpha": "权重 α",
|
||
"weights beta": "权重 β",
|
||
"Weights beta": "权重 β",
|
||
"weights for alpha, base alpha,IN00,IN02,...IN11,M00,OUT00,...,OUT11": "α 的权重 （基层α,输入层00,输入层01,...,输入层11,中间层,输出层00,...,输出层11）",
|
||
"Weights Presets": "权重预设",
|
||
"Weights setting": "权重设定",
|
||
"Weights Setting": "权重设定",
|
||
"weights,for beta, base beta,IN00,IN02,...IN11,M00,OUT00,...,OUT11": "β 的权重 （基层β,输入层00,输入层01,...,输入层11,中间层,输出层00,...,输出层11）",
|
||
"Welcome to LightDiffusionFlow! (^o^)/~": "欢迎使用 LightDiffusionFlow! \\(^o^)/~",
|
||
"Welcome to LightDiffusionFlow! \\(^o^)/~": "欢迎使用 LightDiffusionFlow! \\(^o^)/~",
|
||
"What directory the [📂] button opens": "选择 [📂] 按钮开启的目录目录",
|
||
"What to put inside the masked area before processing it with Stable Diffusion.": "在使用 Stable Diffusion 處理遮罩区域之前要在遮罩区域内放置什麼",
|
||
"When 'Pause After N Epochs' is greater than 0, this is the amount of time, in seconds, that training will be paused for": "当 \"完成 N Epochs 後暂停\" 选项设定大於 0 时，每次暂停的时间 (单位: 秒)。",
|
||
"When adding extra network such as Hypernetwork or Lora to prompt, use this multiplier for it.": "当将额外网路（如 Hypernetwork 或 LoRA）新增到提示时，使用此乘数。",
|
||
"When adding to prompt, refer to lora by": "在新增到提示词时，通过以下格式提及lora",
|
||
"When adding to prompt, refer to Lora by": "将扩展模型新增到提示词时，通过以下格式提及lora",
|
||
"when checked, do not output a video": "启用时, 不输出影片",
|
||
"When enabled, a checkpoint will be generated at the specified epoch intervals while training is active. This also controls manual generation using the 'save weights' button while training is active.": "启用本选项後，会在训练过程中以特定间隔 (多少个 Epochs) 生成模型。同时也能使用 “储存权重” 按钮来手动生成模型。",
|
||
"When enabled, a checkpoint will be generated when training completes successfully.": "启用本选项後，会在训练顺利完成後生成一个模型。",
|
||
"When enabled, a checkpoint will be generated when training is canceled by the user.": "本选项启用後，会在训练被使用者取消时生成一个模型。",
|
||
"When enabled, a unique snapshot of the diffusion weights will be saved at each specified epoch interval. This uses more HDD space (A LOT), but allows resuming from training, including the optimizer state.": "启用本选项後，训练过程中会在特定时间间隔 (多少个 Epochs) 独立储存 diffusion 权重快照。这会使用非常多的硬盘空间，但可以从训练中恢复包括最佳化器状态之类的参数。",
|
||
"When enabled, a unique snapshot of the diffusion weights will be saved when training completes. This uses more HDD space, but allows resuming from training including the optimizer state.": "启用本选项後，训练顺利完成後会独立储存一个 diffusion 权重快照。这会使用更多的硬盘空间，但可以从训练中恢复包括最佳化器状态之类的参数。",
|
||
"When enabled, a unique snapshot of the diffusion weights will be saved when training is canceled. This uses more HDD space, but allows resuming from training including the optimizer state.": "启用本选项後，训练被手动取消时会独立储存一个 diffusion 权重快照。这会使用更多的硬盘空间，但可以从训练中恢复包括最佳化器状态之类的参数。",
|
||
"When enabled, checkpoints will be saved to a subdirectory in the selected checkpoints folder.": "启用本选项时，模型会储存到指定的模型储存子目录。",
|
||
"When enabled, tags after the first ',' in a prompt will be randomly ordered, which can potentially improve training.": "启用後，在提示词中第一个\", \"之後的标籤将随机打乱，也许能改善训练效果。",
|
||
"when enabled, will re-extract video frames each run. When using video_input mode, the run will be instructed to write video frames to the drive. If you’ve already populated the frames needed, uncheck this box to skip past redundant extraction, and immediately start the render. If you have not extracted frames, you must run at least once with this box checked to write the necessary frames.": "启用时，将在每次执行时重新提取影片帧。使用 影片输入 模式时，执行程序将视频帧写入驱动器。如果已经填充了所需的帧，请取消选中此框以跳过多馀的提取，然後立即开始渲染。如果尚未提取帧，则必须在选中此框的情况下至少执行一次，以写入必要的帧。",
|
||
"When loading models attempt stream loading optimized for slow or network storage": "为低速硬盘或网络存储使用流式模型载入最佳化",
|
||
"When loading models attempt to reuse previous model dictionary": "载入模型时尝试复用上一模型的字典",
|
||
"When performing the backwards pass, gradients will be set to none, instead of creating a new empty tensor. This will slightly improve VRAM.": "在执行反向传播时，梯度会设定为无，并不会建立一个新的空 tensor 。可略微改善显存用量。",
|
||
"When reading generation parameters from text into UI (from PNG info or pasted text), do not change the selected model/checkpoint.": "从文本读取生成参数到使用者介面（从 PNG 图像资讯或贴上文本）时，不要更改选定的模型权重存档点",
|
||
"When searched": "检索时",
|
||
"When this box is *checked* latents will not be cached. When latents are not cached, you will save a bit of VRAM, but train slightly slower": "当此框被 *选中* 时，将不会缓存潜变数 (latents) 。当潜变数 (latents) 没有被缓存时，你会节省一点显存 (VRAM) ，但训练速度会稍微慢一些",
|
||
"When this box is checked latents will be cached. Caching latents will use more VRAM, but improve training speed.": "启用本选项时，将缓存潜变数 。缓存的潜变数会佔用更多显存，但能提高训练速度。",
|
||
"when this box is checked, and FFMPEG mp4 is selected as the output format, an audio file will be multiplexed with the video.": "选中此框并以 FFMPEG mp4 为输出格式时, 音讯档案将与影片复用",
|
||
"When using \"Save\" button, save images to a subdirectory": "使用「储存」按钮时，将图像储存到子目录",
|
||
"When using 'Save' button, only save a single selected image": "使用「储存」按钮时，只储存一个选定的图像",
|
||
"When using [filewords], this is the class identifier to use/find in existing prompts. Should be a single word.": "使用 [filewords] 时，这是在现有提示词中使用或寻找的类别关键字。应是单词。",
|
||
"When using [filewords], this is the class to use when building prompts.": "使用 [filewords] 时，构建提示时使用的类别(正则)。",
|
||
"When using [filewords], this is the instance identifier that is unique to your subject. Should be a single word.": "使用 [filewords] 时，这是主题独有的实例关键字。应是单词。",
|
||
"When using [filewords], this is the subject to use when building prompts.": "使用 [filewords] 时，构建提示时使用的主题。",
|
||
"When you are done click the": "点击 ",
|
||
"When you fill in the Overwrite subject field, that subject will be used to build the dynamic prompt around. It is best, if you set the subject type to match the subject. For example, set it to humanoid if you place a person in the override subject field.": "填写覆盖主题词段将被用来建立动态提示词。最好把主题类型设定为与主题相符合。例如：如果你在覆盖主题词段中放置一个人，就把它设定为人形。",
|
||
"When you have --xformers in your command line args, you want AnimateDiff to": "启用 xformers 时 AnimateDiff 的行为",
|
||
"Where to insert the trigger keyword": "在何處插入触發关键词",
|
||
"Where to save Controlnet data?": "在哪储存 Controlnet 数据？",
|
||
"Whether to use optical flow to blend frames during cadence (if cadence more than 1)": "在生成间隔期间，使用光流法渲染帧（即使间隔大於1）",
|
||
"Which algorithm to use to produce the image": "使用哪种演算法生成图像",
|
||
"Which model to use?": "使用的模型",
|
||
"whimsical": "whimsical (奇幻)",
|
||
"White is Opaque": "白色不透明",
|
||
"Whitelist": "白名单",
|
||
"Whole picture": "全图",
|
||
"wide": "wide (宽图)",
|
||
"width": "宽度",
|
||
"Width": "宽度",
|
||
"Width 1": "宽度 1",
|
||
"Width 2": "宽度 2",
|
||
"Width/height limit for the above option, in pixels": "解析度宽高上限（px）",
|
||
"Wildcard folder exclusion list": "万用字元目录排除列表",
|
||
"Wildcards": "万用字元",
|
||
"Wildcards can be used and the joiner can also be specified:": "可以用万用字元，也可以指定拼接符",
|
||
"Wildcards file": "万用字元档案",
|
||
"Wildcards Manager": "万用字元管理器",
|
||
"Will be added to negative prompts": "会被新增到反向提示词中",
|
||
"Will be added to prompt along with Lora": "将与 Lora 一同新增到提示中",
|
||
"will do nothing!": "将不生效!",
|
||
"will ignore all motion parameters and attempt to reference a video loaded into the runtime, specified by the video_init_path. Max_frames is ignored during video_input mode, and instead, follows the number of frames pulled from the video’s length. Resume_from_timestring is NOT available with Video_Input mode.": "将忽略所有的运动参数，并试图参照载入到执行环境的影片，由影片初始化路径指定。在影片输入模式下，最大帧数会被忽略，而是遵循从影片长度中提取的帧数。从时间字串恢复选项在视频输入模式下不可用。",
|
||
"will output a greyscale depth map image alongside the output images.": "将与输出图像一起输出灰度深度图图像。",
|
||
"Will show your current sd model selected. Also showing if you are idle, or generating something - in that case, total image/s being generated.": "在 Discord 动态状态显示目前选用的模型名称。另外也会显示閒置中或正在产生图像等讯息。",
|
||
"will then become available.": "目录内的文字档案将可以被读取。",
|
||
"Will upscale the image by the selected scale factor; use width and height sliders to set tile size": "将会通过所选择的缩放因子将图像放大；使用宽度和高度滑块设定砖大小",
|
||
"Will upscale the image depending on the selected target size type": "将根据选择的目标尺寸类型对图像进行放大。",
|
||
"Will upscale the image to twice the dimensions; use width and height sliders to set tile size": "将图像放大到两倍尺寸； 使用宽度和高度滑块设定分块尺寸(tile size)",
|
||
"With confidence": "输出置信度权重",
|
||
"With img2img, do exactly the amount of steps the slider specifies (normally you'd do less with less denoising).": "在进行图生图的时候，确切地执行滑块指定的迭代步数（正常情况下更弱的重绘幅度需要更少的迭代步数）",
|
||
"With img2img, do exactly the amount of steps the slider specifies.": "图生图时，准确执行滑块指定的迭代步数",
|
||
"With img2img, fill image's transparent parts with this color.": "在 img2img 中，以此颜色填满图像的透明部分。",
|
||
"With img2img, fill transparent parts of the input image with this color.": "图生图时, 用本选项设定的颜色填充到输入图像的透明部分",
|
||
"With Workflow mode, you turn off the automatic generation of new prompts on ‘generate’, and it will use the Workflow prompt field instead. So you can work and finetune any fun prompts without turning of the script.": "在工作流模式下，关闭了 \"生成 \"时自动生成新提示词的功能，它会使用工作流提示词作为代替。因此可以在不开启脚本的情况下工作和对有趣的提示词进行微调。",
|
||
"Word delimiters when editing the prompt with Ctrl+up/down": "可以通过 Ctrl+Up/Down 编辑提示词权重的 \"提示词分隔符类型\"",
|
||
"word masks": " 提示词遮罩 ",
|
||
"words in here will be added to the start of all positive prompts": "这裡的提示词将被新增到所有正向提示词的开头",
|
||
"Worker Client for Stable Horde. Generate pictures for other users with your PC. Please see readme for additional instructions.": "Stable Horde 工作端。使用您的 PC 为其他使用者产生图像。请阅读说明以获取其他指示。",
|
||
"Worker Name": "节点名称",
|
||
"Workflow": "工作流",
|
||
"Workflow assist": "工作流协助",
|
||
"Workflow assist, suggestions by redditor Woisek.": "工作流协助，由 redditor: Woisek 提出。",
|
||
"Workflow Editor": "工作流编辑器",
|
||
"Workflow mode, turns off prompt generation and uses below Workflow prompt instead.": "工作流模式：关闭提示词生成，使用以下的工作流提示词代替。",
|
||
"Workflow prompt": "工作流提示词",
|
||
"Workflows": "工作流",
|
||
"wrap": "包裹",
|
||
"Write all generated prompts to a file": "将所有产生的提示词写入档案",
|
||
"Write image to a directory (default - log/images) and generation parameters into csv file.": "将图像写入目录（预设 — log/images）并将生成参数写入CSV表格档案",
|
||
"Write infotext to metadata of the generated image": "写入生成资讯到生成图像的元数据中",
|
||
"write merged model ID to": "将融合模型 ID 写入到",
|
||
"Write prompts to file": "将提示词写入档案",
|
||
"Write prompts to file: Create a new .txt file for every batch containing the prompt template as well as the generated prompts.": "将提示写入档案：为每个批次创建一个新的 .txt 档案，其中包含提示範本和产生的提示词。",
|
||
"Write raw prompt to image": "将提示词写入图像",
|
||
"Write template into image metadata.": "将範本写入图像中继资料。",
|
||
"Write the prompt template into the image metadata": "将提示词範本写入图像数据。",
|
||
"Write weights to tags files": "写入权重到标籤档案中",
|
||
"X center axis for 2D angle/zoom": "用於 2D 角度/缩放 的 X 轴中心",
|
||
"x center axis for 2D angle/zoom *only*": "2D 旋转/缩放中 X 轴的中心点",
|
||
"X offset (A)": "X 偏移 (A)",
|
||
"X offset (B)": "X 偏移 (B)",
|
||
"X panning": "沿 X 轴滚动",
|
||
"X type": "X 轴类型",
|
||
"X Types": "X 轴类型",
|
||
"X values": "X 轴值",
|
||
"X Values": "X 轴值",
|
||
"X/Y plot": "X/Y 图表",
|
||
"X/Y Plus-1.4.2": "X/Y图表 Plus",
|
||
"X/Y/Z plot": "X/Y/Z 图表",
|
||
"XavierNormal": "Xavier 正态",
|
||
"XavierUniform": "Xavier 均匀",
|
||
"xmenber": "X 值",
|
||
"xtype": "X 类型",
|
||
"XYZ plot": "XYZ 图",
|
||
"XYZ Plot": "XYZ 图",
|
||
"XYZ plot settings": "XYZ 图设定",
|
||
"Y center axis for 2D angle/zoom": "用於 2D 角度/缩放的 Y 轴中心",
|
||
"y center axis for 2D angle/zoom *only*": "2D 旋转/缩放中 Y 轴中心点",
|
||
"Y offset (A)": "Y 偏移 (A)",
|
||
"Y offset (B)": "Y 偏移 (B)",
|
||
"Y panning": "沿 Y 轴滚动",
|
||
"Y type": "Y 轴类型",
|
||
"Y Types": "Y 轴类型",
|
||
"Y values": "Y 轴值",
|
||
"Y Values": "Y 轴值",
|
||
"Yellow | Blue": "黄色 | 蓝色",
|
||
"Yes": "是",
|
||
"ymenber": "Y 值",
|
||
"You are using": "你正在使用 ",
|
||
"You can add more wildcards by creating a text file with one term per line and name is mywildcards.txt. Place it in G:\\ai-paint\\extensions\\sd-dynamic-prompts\\wildcards.": "你可以建立一个每行一个术语且名称为 mywildcards.txt 的文本档案来新增更多万用字元，并把他放置在.\\extensions\\sd-dynamic-prompts\\wildcards目录下",
|
||
"You can also choose the prompt seperator mode for use with Latent Couple extension": "可以选择提示词分隔模式来使用 Latent Couple 延伸模组",
|
||
"You can change the maximum execution time, by default it’s 30seconds.": "你可以调节最大执行时间，预设 30 秒。",
|
||
"You can choose a certain subject type, if you want to generate something more specific. It has the following types:": "需要生成更具体的图像, 可以选择主题类型。有以下幾种：",
|
||
"You can enhance semantic segmentation for control_v11p_sd15_seg from lllyasviel. Non-semantic segmentation for Edit-Anything will be supported when they convert their models to lllyasviel format.": "你可以使用 lllyasviel 的 control_v11p_sd15_seg 模型进行语义分割。当模型转换为 lllyasviel 格式时，将还将支援Edit-Anything 的非语义分割。",
|
||
"You can enhance semantic segmentation for control_v11p_sd15_seg from lllyasviel. You can also utilize": "可以使用 lllyasviel 的 control_v11p_sd15_seg 模型强化语义分割功能。也可以使用 ",
|
||
"You can generate image layout either in single image or in batch. Since there might be A LOT of outputs, there is no gallery for preview. You need to go to the output folder for either single image or batch process.": "你可以生成单张或批量的图像分布。由於可能有大量图像输出，所以无法预览。你需要进入输出目录，检视和进行後续操作。",
|
||
"You can mask images by their categories via semantic segmentation. Please enter category ids (integers), separated by": "可通过语义分割将图像分类屏蔽。请输入类别ID (整数) , 以",
|
||
"You can mask images by their categories via semantic segmentation. Please enter category ids (integers), separated by +. Visit here for ade20k and here for coco to get category->id map. Note that coco jumps some numbers, so the actual ID is line_number - 21.": "你可以通过语义分割模型按类别建立遮罩。请输入类别 ID（整数），用+分隔。可以访问 [这裡] 获取 ade20k 的分类列表，或者 [这裡] 获取 coco 的分类列表。注意，coco 会略过一些数字，所以实际的 ID 是列表中编号 -21。",
|
||
"You can now start generating images accelerated by TRT. If you need to create more Engines, go to the TensorRT tab.": "现在开始就可以通过 TRT 加速生成图像。如果需要建立更多的引擎，可以回到 TensorRT 页籤继续建立。",
|
||
"You can put any image or images or video you like in the background.": "你可以任何你喜欢的图像或者影片放在背景中。",
|
||
"You can put comma seperated values here, those will be ignored from any list processing. For example, adding \"\"film grain, sepia\"\", will make these values not appear during generation.": "可以填入用逗号隔开的提示词，这些提示词包含的值将会在所有列表處理中被忽略。例如，新增 “”film grain, sepia“” ，将会使得这些提示词包含的值在生成时不出现。",
|
||
"You can specify \"path_to_project_dir/inv/crossfade_tmp\".": "可以将其设定为“你的工程目录/inv/crossfade_tmp”。",
|
||
"You can specify in this field -> [Ebsynth Utility]->[configuration]->[stage 8]->[Background source]": "你可以在这裡设定 -> [Ebsynth Utility]->[延伸模组组态]->[步骤 8]->[背景源]",
|
||
"You can stop the algorithm at any time": "你可以在任意时间停止图像增强演算法",
|
||
"You can toggle the separator mode. Standardly this is a comma, but you can choose an AND or a BREAK.": "可以切换提示词分隔符。标准设定应该为逗号，但现在可以选择 AND 或者 BREAK 。",
|
||
"You can try it by own, to dig more deeper into Abyss ...": "可自行探索，以窥深渊...",
|
||
"You can turn it off and maybe add your own in the prefix or suffix prompt fields": "可以关闭本选项，然後可以在前缀或後缀提示词段中新增自己想要指定的艺术家。",
|
||
"You can use this as a guided image tool or as a looper depending on your settings in the keyframe images field. \n Set the keyframes and the images that you want to show up. \n Note: the number of frames between each keyframe should be greater than the tweening frames.": "根据关键帧图像字段中的设定，可以将其用作引导图像工具或循环器。\n设定要显示的关键帧和图像。\n注意：每个关键帧之间的帧数应大於中间帧。",
|
||
"You can use this as a guided image tool or as a looper depending on your settings in the keyframe images field. \n Set the keyframes and the images that you want to show up. \n Note: the number of frames between each keyframe should be greater than the tweening frames.": "根据关键帧图像字段中的设定，可以将其用作引导图像工具或循环器。\n设定要显示的关键帧和图像。\n注意：每个关键帧之间的帧数应大於中间帧。",
|
||
"You can use this as a guided image tool or as a looper depending on your settings in the keyframe images field. \n Set the keyframes and the images that you want to show up. \n Note: the number of frames between each keyframe should be greater than the tweening frames.": "可以将其作为引导图像工具或循环工具来使用，具体取决於您在关键帧图像字段的设定。\n 设定想要展示的关键帧和图像。\n 注意：每个关键帧之间的帧数应大於过渡帧。",
|
||
"You DID NOT load any model!": "你还没有载入任何模型！",
|
||
"You don't need a mask to composite video. But, Mask types can control the way that video is composited with the previous image each frame.": "合成影片不需要遮罩。但遮罩类型可以控制影片与上一帧图像合成的方式。",
|
||
"You may configurate automatic sam generation. ": "你可以组态自动 SAM 的参数。",
|
||
"You may configurate automatic sam generation. See": "可以组态以下项目来自动 SAM 。检视",
|
||
"You may configurate the following items and generate masked image for all images under a directory. This mode is designed for generating LoRA/LyCORIS training set.": "组态以下项目，为目录下所有图像生成遮罩。该模式用於生成 LoRA / LyCORIS 训练集。",
|
||
"You must enter text prompts to enable groundingdino. Otherwise this extension will fall back to point prompts only.": "必须输入文本提示词才能启用 GroundingDINO，否则将仅使用标记点。",
|
||
"You probably want this to be 'fp16'.": "你可能想要设定为半精度 (fp16)。",
|
||
"Your Civitai API Key": "Civitai API 密钥",
|
||
"Your Civitai Link Key": "Civitai Link 密钥",
|
||
"Your huggingface token to use for cloning files.": "用於下载档案的 huggingface 令牌",
|
||
"your select language": "选择的语言",
|
||
"ytype": "Y 类型",
|
||
"Z type": "Z 轴类型",
|
||
"Z values": "Z 轴值",
|
||
"z-a": "字母顺序：从z到a",
|
||
"Z123": "Z123-3D生成",
|
||
"Zentangle": "Zentangle (禅绕画)",
|
||
"Zero Terminal SNR": "零终信噪比 (Zero Terminal-SNR)",
|
||
"zeros": "空",
|
||
"zeros will not add any new pixel information": "空模式下不会新增任何新的像素资讯",
|
||
"zh_CN Localization": "简体中文本地化语言包",
|
||
"zh_Hans": "zh_Hans (简体中文)",
|
||
"zh_Hans Localization": "简体中文本地化语言包",
|
||
"zh_Hant": "zh_Hant (繁體中文)",
|
||
"zh_Hant Localization": "繁体中文（zh_Hant）语言包",
|
||
"zh_TW Localization": "正体中文在地化语言包",
|
||
"Zip": "打包下载",
|
||
"ZIP Code": "邮政编码",
|
||
"ZoeDepth was not trained on panoramic images. It doesn't know anything about panoramas or spherical projection. Here, we just treat the estimated depth as radius and some projection errors are expected. Nonetheless, ZoeDepth still works surprisingly well on 360 reconstruction.": "ZoeDepth 不是基於全景图像上训练的。它无法辨识全景图或球形投影的特徵。在这个页籤，它仅把估计的深度当作半径，所以会产生一些预料中的投影误差。儘管如此，ZoeDepth 在 360° 重建模型上仍有令人惊讶的效果。",
|
||
"ZoeDepth was not trained on panoramic images. It doesn’t know anything about panoramas or spherical projection. Here, we just treat the estimated depth as radius and some projection errors are expected. Nonetheless, ZoeDepth still works surprisingly well on 360 reconstruction.": "ZoeDepth 不是基於全景图像上训练的。它无法辨识全景图或球形投影的特徵。在这个页籤，它仅把估计的深度当作半径，所以会产生一些预料中的投影误差。儘管如此，ZoeDepth 在 360° 重建模型上仍有令人惊讶的效果。",
|
||
"Zoom": "缩放",
|
||
"Zoom canvas": "画布缩放",
|
||
"Zoom in masked area": "缩放遮罩区域",
|
||
"{1-3$$artist1|artist2|artist3}": "{1-3$$艺术家1|艺术家2|艺术家3}",
|
||
"{2$$__artist__|__artist__}": "{2$$__艺术家__|__艺术家_}",
|
||
"{2$$__artist__}": "{2$$__艺术家__}",
|
||
"{2$$artist1|artist2|artist3}": "{2$$艺术家1|艺术家2|艺术家3}",
|
||
"{2::artist1|artist2}": "{2::艺术家1|艺术家2}",
|
||
"{{1-$$and$$__adjective__}}": "{{1-3$$and$$__adjective__}}",
|
||
"“automatic” is entirely build around Latent Couple. It will pass artists and the amount of people/animals/objects to generate in the prompt automatically. Set the prompt compounder equal to the amount of areas defined in Laten Couple.": "\"自动\" 是完全围绕 Latent Couple 建置的。它将在提示词中自动传递艺术家和要生成的人/动物/物件的数量。将提示词混合值设定为等於 Latent Couple 中定义的分区数量。",
|
||
"↻ Reset": "↻ 重设",
|
||
"⏱ Changelog": "⏱ 更新日誌",
|
||
"♻️ Reset settings": "♻️ 恢复预设设定",
|
||
"⚙️ Basic Settings": "⚙️ 基础设定",
|
||
"⚙️ General Settings": "⚙️ 基础设定",
|
||
"⚙️ Load": "⚙️ 载入",
|
||
"⚠ Caution: You should only use these options if you know what you are doing. ⚠": "⚠ 警告：只有您知道在做什麼时才使用这些选项。⚠",
|
||
"⚠️ Important info, please read carefully": "⚠️ 重要资讯，请仔细阅读",
|
||
"❌ Del": "❌ 删除",
|
||
"❌Delete": "❌删除",
|
||
"❔ Known Issues": "❔ 已知问题",
|
||
"➕ Add": "➕ 新增",
|
||
"➕ Positive Mask": "➕ 正向遮罩",
|
||
"➖ Negative Mask": "➖ 反向遮罩",
|
||
"➖ Remove": "➖ 移除",
|
||
"➠ Inpaint": "➠ 区域重绘",
|
||
"➠ Inpaint sketch": "➠ 塗鸦重绘",
|
||
"➠ Sketch": "➠ 塗鸦",
|
||
"清空正面提示词": "清空正向提示词",
|
||
"清空负面提示词": "清空反向提示词",
|
||
"🎉 Promo": "🎉 广告",
|
||
"🎓 Guides": "🎓 教程",
|
||
"🎥 Reset Camera": "🎥 重设镜头",
|
||
"🎨 Color Correction Settings": "🎨 颜色校正设定",
|
||
"🎭 Mask Settings": "🎭 遮罩设定",
|
||
"👍 Like": "👍 喜欢",
|
||
"👍 Likes": "👍 喜欢的",
|
||
"👎 Dislike": "👎 不喜欢",
|
||
"👎 Dislikes": "👎 不喜欢的",
|
||
"💡 About": "💡 关於",
|
||
"💾 Apply settings": "💾 套用设定",
|
||
"💾 Download image": "💾 下载图像",
|
||
"💾 Save": "💾 储存",
|
||
"💾🧍 Save Pose": "💾🧍 储存姿态",
|
||
"📁\nOpen PSD folder": "📁\n开启 PSD 储存目录",
|
||
"📂 Open templates folder": "📂 开启模板目录",
|
||
"📋 Copy to clipboard": "📋 複製到剪切板",
|
||
"📘 Manual": "📘 使用手册",
|
||
"📝 Dry Run": "📝 试运行",
|
||
"📣 Announcements": "📣 公告",
|
||
"🔄 All Reset": "🔄 全部重设",
|
||
"🔄 Reload ComfyUI interfaces (client side)": "🔄 重载 ComfyUI 介面 (客户端)",
|
||
"🔄 Reload settings": "🔄 重新载入设定",
|
||
"🕵️♂️ CLIP Interrogator 🕵️♂️": "🕵️♂️ CLIP 反推 🕵️♂️",
|
||
"🖼 Set": "🖼 设定",
|
||
"😭 SadTalker: Learning Realistic 3D Motion Coefficients for Stylized Audio-Driven Single Image Talking Face Animation (CVPR 2023)": "😭 SadTalker: 通过学习 3D 运动参数来製作的风格化音讯驱动单图脸部说话动画 (CVPR 2023)",
|
||
"🤗 token": "🤗 令牌",
|
||
"🦒 Colab Run Command": "🦒 Colab 执行指令",
|
||
"🧍 Reset Pose": "🧍 重设姿态",
|
||
"🧙 Wizard": "🧙 嚮导"
|
||
}
|