build: static localizations

localizations/zh_Hans.json

@@ -12,6 +12,7 @@
   "##txt2img_controlnet_ControlNet_controlnet_type_filter_radio##Normal": "法缐图",
   "'add_soundtrack' and 'soundtrack_path' aren't being honoured in \"Interpolate an existing video\" mode. Original vid audio will be used instead with the same slow-mo rules above.": "‘新增音讯’和‘音讯路径’将不会在‘插入现有影片’模式中执行，原有影片的音讯将会使用相同的慢动作规则设定",
   "'seed_behavior' will be forcibly set to 'schedule'.": "“种子行为” 会被强制设为 “调度计劃” 来进行调度",
+  "(\"Add Textual Inversion hashes to infotext\" needs to be enabled)": "(需启用 \"新增 Lora 的杂凑值文本到图像资讯中\" 选项)",
   "(\"When searched\" option will only show the item when the search string has 4 characters or more)": "(\"检索时\" 选项只有当搜寻字串有4个或更多字符时, 才会显示隐藏栏目)",
   "(0 = default (7 for karras, 1 for polyexponential); higher values result in a more steep noise schedule (decreases faster))": "(0 = 预设 (karras 选择 7, polyexponential 选择 1); 值越高噪点调度曲缐越陡峭 (递减更快速))",
   "(0 = default (7 for karras, 1 for polyexponential); higher values result in a steeper noise schedule (decreases faster))": "(0 = 预设 (karras 设定 7, polyexponential 设定 1); 值越高会得到越陡峭的噪点调度曲缐 (递减更快速))",
@@ -111,6 +112,7 @@
   "(e.g. \"hair/colours/light/...\")": "(例如: \"hair/colors/light/...\")",
   "(Early access models are only downloadable for supporter tier members)": "(抢鲜体验模型仅供支持者级的成员下载)",
   "(Early access models are only downloadable for supporter tier members, Requires API key)": "(抢鲜体验模型仅供支持者级别的成员下载, 需要 API 密钥)",
+  "(Enable Clip skip for the secondary clip model in sdxl. Has no effect on SD 1.5 or SD 2.0/2.1.)": "(为 SDXL 中的第二模型启用 Clip 终止层数调整选项. 对 SD 1.5 或 SD 2.0/2.1 模型无效)",
   "(enable stochasticity; start value of the sigma range; only applies to Euler, Heun, and DPM2)": "(启用随机流失率; sigma 波动範围的最低值; 仅作用於 Euler, Heun, 和 DPM2 採样方法)",
   "(enables hypertile for all modes, including hires fix second pass; noticeable change in details of the generated picture)": "(为所有模型启用 Hypertile, 包括高解析度修复层; 生成图像的细节会有明显变化)",
   "(enables hypertile just for hires fix second pass - regardless of whether the above setting is enabled)": "(仅对高解析度修复层启用 Hypertile - 无论是否启用上述选项)",
@@ -144,6 +146,7 @@
   "(larger = more neural network layers affected; minor effect on performance)": "(数值越大意味着受影响的神经网络层越多; 对性能影响不大)",
   "(larger = worse performance)": "(数值越大意味着性能越差)",
   "(lets you override the noise schedule for k-diffusion samplers; choosing Automatic disables the three parameters below)": "(覆盖 k-diffusion 採样方法的噪点调度器; 选择自动会停用以下的三个参数)",
+  "(load T5 text encoder; increases VRAM use by a lot, potentially improving quality of generation; requires model reload to apply)": "(载入 T5 文本编码器; 大幅提高显存用量, 可能会提高生成品质; 需重载模型以生效)",
   "(LoCon requires SD-WebUI v1.5 or higher,  DoRA requires v1.9 or higher)": "(LoCon 需要 SD-WebUI 版本为 v1.5 或更高,  DoRA 需要 v1.9 或更高)",
   "(Low values = visible seam)": "(数值越低=接缝越明显)",
   "(M1) Multiplier": "(M1) 倍率",
@@ -1488,6 +1491,7 @@
   "Clip skip": "Clip 跳过层",
   "Clip skip (2 if training anime model)": "CLIP 终止层数 (训练二次元模型时调至 2)",
   "CLIP skip schedule": "CLIP 终止层数调度计劃",
+  "Clip skip SDXL": "SDXL Clip 终止层数",
   "Clip skip:": "CLIP 终止层数:",
   "CLIP tensors checker": "Clip tensors 检测",
   "CLIP: maximum number of lines in text file": "CLIP: 文本档案的最大行数",
@@ -2461,6 +2465,7 @@
   "Enable Style Selector": "启用样式选择器",
   "enable Style Selector by default": "预设启用样式选择器",
   "Enable Subseed scheduling": "启用第二种子调度计劃",
+  "Enable T5": "启用 T5 ",
   "Enable Tag Autocompletion": "启用标记自动补齐",
   "Enable tensorboard logging": "启用 Tensorboard 日誌记录",
   "Enable tensorboard logging.": "启用 TensorBoard 日誌记录。",
@@ -5235,6 +5240,7 @@
   "Prev page": "上一页",
   "Prevent Empty Spot": "防止空白区域",
   "Prevent empty spots in grid (when set to autodetect)": "（启用自动侦测时）防止宫格图中出现空位",
+  "Prevent screen sleep during generation": "防止在生成过程中萤幕进入睡眠状态",
   "Prevent Stability-AI's ldm/sgm modules from printing noise to console.": "阻止 Stability-AI 的 ldm/sgm 模组向控制台列印垃圾资讯",
   "Prevents overfit by clipping gradient norms. Default value is 0.0. Recommended value for Lora is 1.0": "通过裁剪梯度归一层防止过拟合。预设 0.0。推荐 Lora 使用 1.0 。",
   "Preview": "预览",
@@ -7786,6 +7792,7 @@
   "Write all generated prompts to a file": "将所有产生的提示词写入档案",
   "Write image to a directory (default - log/images) and generation parameters into csv file.": "将图像写入目录（预设 — log/images）并将生成参数写入CSV表格档案",
   "Write infotext to metadata of the generated image": "写入生成资讯到生成图像的元数据中",
+  "Write log.csv when saving images using 'Save' button": "当使用 “储存” 按钮储存图像时写入 log.csv 档案",
   "write merged model ID to": "将融合模型 ID 写入到",
   "Write prompts to file": "将提示词写入档案",
   "Write prompts to file: Create a new .txt file for every batch containing the prompt template as well as the generated prompts.": "将提示写入档案：为每个批次创建一个新的 .txt 档案，其中包含提示範本和产生的提示词。",

localizations/zh_Hant.json

@@ -12,6 +12,7 @@
   "##txt2img_controlnet_ControlNet_controlnet_type_filter_radio##Normal": "法線圖",
   "'add_soundtrack' and 'soundtrack_path' aren't being honoured in \"Interpolate an existing video\" mode. Original vid audio will be used instead with the same slow-mo rules above.": "‘新增音訊’和‘音訊路徑’將不會在‘插入現有影片’模式中執行，原有影片的音訊將會使用相同的慢動作規則設定",
   "'seed_behavior' will be forcibly set to 'schedule'.": "“種子行為” 會被強制設為 “調度計劃” 來進行調度",
+  "(\"Add Textual Inversion hashes to infotext\" needs to be enabled)": "(需啟用 \"新增 Lora 的雜湊值文本到圖像資訊中\" 選項)",
   "(\"When searched\" option will only show the item when the search string has 4 characters or more)": "(\"檢索時\" 選項只有當搜尋字串有4個或更多字符時, 才會顯示隱藏欄目)",
   "(0 = default (7 for karras, 1 for polyexponential); higher values result in a more steep noise schedule (decreases faster))": "(0 = 預設 (karras 選擇 7, polyexponential 選擇 1); 值越高噪點調度曲線越陡峭 (遞減更快速))",
   "(0 = default (7 for karras, 1 for polyexponential); higher values result in a steeper noise schedule (decreases faster))": "(0 = 預設 (karras 設定 7, polyexponential 設定 1); 值越高會得到越陡峭的噪點調度曲線 (遞減更快速))",
@@ -111,6 +112,7 @@
   "(e.g. \"hair/colours/light/...\")": "(例如: \"hair/colors/light/...\")",
   "(Early access models are only downloadable for supporter tier members)": "(搶鮮體驗模型僅供支持者級的成員下載)",
   "(Early access models are only downloadable for supporter tier members, Requires API key)": "(搶鮮體驗模型僅供支持者級別的成員下載, 需要 API 密鑰)",
+  "(Enable Clip skip for the secondary clip model in sdxl. Has no effect on SD 1.5 or SD 2.0/2.1.)": "(為 SDXL 中的第二模型啟用 Clip 終止層數調整選項. 對 SD 1.5 或 SD 2.0/2.1 模型無效)",
   "(enable stochasticity; start value of the sigma range; only applies to Euler, Heun, and DPM2)": "(啟用隨機流失率; sigma 波動範圍的最低值; 僅作用於 Euler, Heun, 和 DPM2 採樣方法)",
   "(enables hypertile for all modes, including hires fix second pass; noticeable change in details of the generated picture)": "(為所有模型啟用 Hypertile, 包括高解析度修復層; 生成圖像的細節會有明顯變化)",
   "(enables hypertile just for hires fix second pass - regardless of whether the above setting is enabled)": "(僅對高解析度修復層啟用 Hypertile - 無論是否啟用上述選項)",
@@ -144,6 +146,7 @@
   "(larger = more neural network layers affected; minor effect on performance)": "(數值越大意味著受影響的神經網絡層越多; 對性能影響不大)",
   "(larger = worse performance)": "(數值越大意味著性能越差)",
   "(lets you override the noise schedule for k-diffusion samplers; choosing Automatic disables the three parameters below)": "(覆蓋 k-diffusion 採樣方法的噪點調度器; 選擇自動會停用以下的三個參數)",
+  "(load T5 text encoder; increases VRAM use by a lot, potentially improving quality of generation; requires model reload to apply)": "(載入 T5 文本編碼器; 大幅提高顯存用量, 可能會提高生成品質; 需重載模型以生效)",
   "(LoCon requires SD-WebUI v1.5 or higher,  DoRA requires v1.9 or higher)": "(LoCon 需要 SD-WebUI 版本為 v1.5 或更高,  DoRA 需要 v1.9 或更高)",
   "(Low values = visible seam)": "(數值越低=接縫越明顯)",
   "(M1) Multiplier": "(M1) 倍率",
@@ -1488,6 +1491,7 @@
   "Clip skip": "Clip 跳過層",
   "Clip skip (2 if training anime model)": "CLIP 終止層數 (訓練二次元模型時調至 2)",
   "CLIP skip schedule": "CLIP 終止層數調度計劃",
+  "Clip skip SDXL": "SDXL Clip 終止層數",
   "Clip skip:": "CLIP 終止層數:",
   "CLIP tensors checker": "Clip tensors 檢測",
   "CLIP: maximum number of lines in text file": "CLIP: 文本檔案的最大行數",
@@ -2461,6 +2465,7 @@
   "Enable Style Selector": "啟用樣式選擇器",
   "enable Style Selector by default": "預設啟用樣式選擇器",
   "Enable Subseed scheduling": "啟用第二種子調度計劃",
+  "Enable T5": "啟用 T5 ",
   "Enable Tag Autocompletion": "啟用標記自動補齊",
   "Enable tensorboard logging": "啟用 Tensorboard 日誌記錄",
   "Enable tensorboard logging.": "啟用 TensorBoard 日誌記錄。",
@@ -5235,6 +5240,7 @@
   "Prev page": "上一頁",
   "Prevent Empty Spot": "防止空白區域",
   "Prevent empty spots in grid (when set to autodetect)": "（啟用自動偵測時）防止宮格圖中出現空位",
+  "Prevent screen sleep during generation": "防止在生成過程中螢幕進入睡眠狀態",
   "Prevent Stability-AI's ldm/sgm modules from printing noise to console.": "阻止 Stability-AI 的 ldm/sgm 模組向控制台列印垃圾資訊",
   "Prevents overfit by clipping gradient norms. Default value is 0.0. Recommended value for Lora is 1.0": "通過裁剪梯度歸一層防止過擬合。預設 0.0。推薦 Lora 使用 1.0 。",
   "Preview": "預覽",
@@ -7786,6 +7792,7 @@
   "Write all generated prompts to a file": "將所有產生的提示詞寫入檔案",
   "Write image to a directory (default - log/images) and generation parameters into csv file.": "將圖像寫入目錄（預設 — log/images）並將生成參數寫入CSV表格檔案",
   "Write infotext to metadata of the generated image": "寫入生成資訊到生成圖像的元數據中",
+  "Write log.csv when saving images using 'Save' button": "當使用 “儲存” 按鈕儲存圖像時寫入 log.csv 檔案",
   "write merged model ID to": "將融合模型 ID 寫入到",
   "Write prompts to file": "將提示詞寫入檔案",
   "Write prompts to file: Create a new .txt file for every batch containing the prompt template as well as the generated prompts.": "將提示寫入檔案：為每個批次創建一個新的 .txt 檔案，其中包含提示範本和產生的提示詞。",