build: static localizations
github-actions[bot]
parent
b489b281dd
commit
94d299cdf5
|
|
@ -420,6 +420,7 @@
|
|||
"Also output single joined audio file (will be named <date>_joined.wav)": "同时输出一个音讯档案 (将命名为 <日期>_joined.wav)",
|
||||
"alternate": "交替",
|
||||
"Alternate Steps": "交替叠代",
|
||||
"(alternative implementation for the above; used prior to 1.6.0 for DDIM sampler; ignored if the above is set; changes seeds)": "(上述选项的另一种实作方式; 在 1.6.0 之前用於 DDIM 採样方法; 如果设定了上述选项, 则此选项将被忽略; 影响随机性)",
|
||||
"Alternatively, if one wants to keep faraway details, one may instead make them smaller and closer than they physically would be (in order to fit nicely into the limited depth space).": "或者，如果想保留远處的细节，可以让它们比实际上更小、更近，以便很好地适应有限的深度空间。",
|
||||
"Alternatively, use": "或者，您也可以使用",
|
||||
"Alternatively, you can enable": "或者，您可以启用",
|
||||
|
|
@ -449,6 +450,7 @@
|
|||
"Amount schedule": "强度计劃",
|
||||
"Amount times to repeat upscaling with IMG2IMG (loopback)": "通过图生图放大的重複次数 (回送)",
|
||||
"Amplification of distortion of circles": "圆形变形的放大倍数",
|
||||
"Amplifies the contrast that may be lost in partially masked regions.": "增强在部分遮罩区域中可能减弱的对比度。",
|
||||
"Analog Film": "Analog Film (胶片)",
|
||||
"Analyse": "分析",
|
||||
"Analyse Face": "分析脸部",
|
||||
|
|
@ -2421,11 +2423,15 @@
|
|||
"How many times to improve the generated image iteratively; higher values take longer; very low values can produce bad results": "叠代改进产生的图像多少次；更高的值需要更长的时间；非常低的值会产生不好的结果",
|
||||
"how many times to interpolate the source video. e.g source video fps of 12 and a value of x2 will yield a 24fps interpolated video": "源影片插值次数 (例如, 源影片帧数为12, 插值次数X为2, 则生成一个24帧的插值影片)",
|
||||
"How many times to process an image. Each output is used as the input of the next loop. If set to 1, behavior will be as if this script were not used.": "设定图像處理的迴圈次数，每次迴圈的输出会作为下一个迴圈的输入。若设定为1，则行为会像没有使用此脚本一样。",
|
||||
"How much an image region can change before the original pixels are not blended in anymore.": "一个图像区域在原始像素不再混合之前可以改变的程度。",
|
||||
"How much of noise from each octave is added on each iteration. Higher values will make it more straighter and sharper, while lower values will make it rounder and smoother. It is limited by 1.0 as the resulting gain fill the frame completely with noise.": "每次迭代时，每个倍频程的噪点增加量。数值越大越平直、越锐利，数值越小越圆滑。它的最大限制值为 1.0 ，该数值所产生的增益会使整个画面充满噪点。",
|
||||
"how much the image should look like the previou one and new image frame init. strength schedule might be better if this is higher, around .75 during the keyfames you want to switch on": "上一图像和现在的图像的相似程度和新图像的初始化强度。设定更高的值对强度调度计劃会更好，在你想切换关键帧中，围绕 0.75 设定",
|
||||
"How much to blur the mask before processing, in pixels.": "處理前要对遮罩进行多强的模糊，以画素为单位",
|
||||
"How often, in seconds, to flush the pending tensorboard events and summaries to disk.": "多少秒刷新一次待办 TensorBoard 事件和摘要到磁碟上",
|
||||
"How sharp the transition should be between blended and not blended.": "混合与非混合之间的过渡尖锐程度。",
|
||||
"How should Style Names Rendered on UI": "样式名称的 UI 渲染方式",
|
||||
"How strongly partially masked content should be preserved.": "部分遮罩内容应被保留的强度。",
|
||||
"How strongly the original mask should bias the difference threshold.": "原始遮罩偏离差异阈值的程度。",
|
||||
"How strong of a variation to produce. At 0, there will be no effect. At 1, you will get the complete picture with variation seed (except for ancestral samplers, where you will just get something).": "想要产生多强烈的变化。设为 0 时，将没有效果。设为 1 时，你将获得完全产自差异随机种子的图像（此功能对带有 a 後缀的取样器无效）",
|
||||
"How to complete nested wildcard paths": "万用字元嵌套路径补全方式",
|
||||
"How to complete nested wildcard paths (e.g. \"hair/colours/light/...\")": "万用字元嵌套路径补全方式 (例如: \"hair/colors/light/...\")",
|
||||
|
|
@ -3312,6 +3318,7 @@
|
|||
"Mask Target (e.g., girl, cats)": "遮罩目标（如 girl, cats）",
|
||||
"Mask Threshold": "遮罩阈值",
|
||||
"Mask transparency": "遮罩透明度",
|
||||
"Mask Upload": "上传遮罩",
|
||||
"Mask x(→) offset": "遮罩 X 轴 (→) 偏移",
|
||||
"Mask x(→) offset 10th": "遮罩 X 轴 (→) 偏移",
|
||||
"Mask x(→) offset 2nd": "遮罩 X 轴 (→) 偏移",
|
||||
|
|
@ -4013,6 +4020,7 @@
|
|||
"Output Paths": "输出路径",
|
||||
"Output per image:": "单独输出每张图像：",
|
||||
"output resolution": "输出解析度",
|
||||
"Output Root": "Output 目录根目录",
|
||||
"outputs": "输出",
|
||||
"Output settings: all settings (including fps and max frames)": "输出设定：所有设定（包括帧率和最大帧数）",
|
||||
"Output style": "输出类型",
|
||||
|
|
@ -4130,6 +4138,7 @@
|
|||
"Pipeline": "管缐",
|
||||
"Pix2Pix img CFG schedule": "Pix2Pix 图像CFG排程",
|
||||
"Pixel Art": "Pixel Art (像素艺术)",
|
||||
"Pixel Composite Settings": "像素合成设定",
|
||||
"Pixelize": "像素化",
|
||||
"Pixel Perfect": "完美像素",
|
||||
"Pixel size": "像素尺寸",
|
||||
|
|
@ -5130,6 +5139,7 @@
|
|||
"sharpen face": "锐化脸部",
|
||||
"Sharpness": "锐度",
|
||||
"Sharpness:": "锐化度",
|
||||
"Shifts when preservation of original content occurs during denoising.": "降噪过程中, 原始画面保留比例随採样迭代步数变化的调度函式偏离量。",
|
||||
"should be 2 or lower.": "必须小於等於 2",
|
||||
"Shoulder To Hip": "肩臀距离",
|
||||
"Shoulder Width": "肩宽",
|
||||
|
|
@ -5258,6 +5268,7 @@
|
|||
"softedge_hedsafe": "SoftEdge_HEDSafe (软边缘检测 - 保守 HED 算法)",
|
||||
"softedge_pidinet": "SoftEdge_PiDiNet (软边缘检测 - PiDiNet 算法)",
|
||||
"softedge_pidisafe": "SoftEdge_PiDiNetSafe (软边缘检测 - 保守 PiDiNet 算法)",
|
||||
"softedge_teed": "softedge_teed (软边缘检测 - 高效边缘检测)",
|
||||
"Soft inpainting": "柔和重绘",
|
||||
"Soft inpainting allows you to": "柔和区域重绘可以",
|
||||
"soft_light": "柔光",
|
||||
|
|
@ -5420,7 +5431,9 @@
|
|||
"Styles allow you to add custom text to prompt. Use the {prompt} token in style text, and it will be replaced with user's prompt when applying style. Otherwise, style's text will be added to the end of the prompt.": "预设样式允许自行新增自订文本到提示词中。\n在预设样式文本中使用 {prompt} 词元，在套用预设样式时，它将被使用者的提示词所替代。\n不然的话，预设样式文本会被新增到提示词末尾。",
|
||||
"Style Selector": "样式选择器",
|
||||
"Styles: refresh": "预设样式: 刷新",
|
||||
"Subdirectory": "子目录",
|
||||
"Sub directory depth": "子目录深度",
|
||||
"Subdirectory (even temp dir)": "子目录 (包括临时目录)",
|
||||
"Sub folder:": "子目录: ",
|
||||
"Sub-folder": "子目录",
|
||||
"Sub Folder:": "子目录: ",
|
||||
|
|
@ -6272,6 +6285,7 @@
|
|||
"Weight values": "权重值",
|
||||
"Weight_values": "权重值",
|
||||
"Welcome to LightDiffusionFlow! \\(^o^)/~": "欢迎使用 LightDiffusionFlow! \\(^o^)/~",
|
||||
"What directory the [📂] button opens": "选择 [📂] 按钮开启的目录目录",
|
||||
"What to put inside the masked area before processing it with Stable Diffusion.": "在使用 Stable Diffusion 處理遮罩区域之前要在遮罩区域内放置什麼",
|
||||
"When adding extra network such as Hypernetwork or Lora to prompt, use this multiplier for it.": "当将额外网路（如 Hypernetwork 或 LoRA）新增到提示时，使用此乘数。",
|
||||
"When adding to prompt, refer to lora by": "在新增到提示词时，通过以下格式提及lora",
|
||||
|
|
|
|||
|
|
@ -420,6 +420,7 @@
|
|||
"Also output single joined audio file (will be named <date>_joined.wav)": "同時輸出一個音訊檔案 (將命名為 <日期>_joined.wav)",
|
||||
"alternate": "交替",
|
||||
"Alternate Steps": "交替疊代",
|
||||
"(alternative implementation for the above; used prior to 1.6.0 for DDIM sampler; ignored if the above is set; changes seeds)": "(上述選項的另一種實作方式; 在 1.6.0 之前用於 DDIM 採樣方法; 如果設定了上述選項, 則此選項將被忽略; 影響隨機性)",
|
||||
"Alternatively, if one wants to keep faraway details, one may instead make them smaller and closer than they physically would be (in order to fit nicely into the limited depth space).": "或者，如果想保留遠處的細節，可以讓它們比實際上更小、更近，以便很好地適應有限的深度空間。",
|
||||
"Alternatively, use": "或者，您也可以使用",
|
||||
"Alternatively, you can enable": "或者，您可以啟用",
|
||||
|
|
@ -449,6 +450,7 @@
|
|||
"Amount schedule": "強度計劃",
|
||||
"Amount times to repeat upscaling with IMG2IMG (loopback)": "通過圖生圖放大的重複次數 (回送)",
|
||||
"Amplification of distortion of circles": "圓形變形的放大倍數",
|
||||
"Amplifies the contrast that may be lost in partially masked regions.": "增強在部分遮罩區域中可能減弱的對比度。",
|
||||
"Analog Film": "Analog Film (膠片)",
|
||||
"Analyse": "分析",
|
||||
"Analyse Face": "分析臉部",
|
||||
|
|
@ -2421,11 +2423,15 @@
|
|||
"How many times to improve the generated image iteratively; higher values take longer; very low values can produce bad results": "疊代改進產生的圖像多少次；更高的值需要更長的時間；非常低的值會產生不好的結果",
|
||||
"how many times to interpolate the source video. e.g source video fps of 12 and a value of x2 will yield a 24fps interpolated video": "源影片插值次數 (例如, 源影片幀數為12, 插值次數X為2, 則生成一個24幀的插值影片)",
|
||||
"How many times to process an image. Each output is used as the input of the next loop. If set to 1, behavior will be as if this script were not used.": "設定圖像處理的迴圈次數，每次迴圈的輸出會作為下一個迴圈的輸入。若設定為1，則行為會像沒有使用此腳本一樣。",
|
||||
"How much an image region can change before the original pixels are not blended in anymore.": "一個圖像區域在原始像素不再混合之前可以改變的程度。",
|
||||
"How much of noise from each octave is added on each iteration. Higher values will make it more straighter and sharper, while lower values will make it rounder and smoother. It is limited by 1.0 as the resulting gain fill the frame completely with noise.": "每次迭代時，每個倍頻程的噪點增加量。數值越大越平直、越銳利，數值越小越圓滑。它的最大限制值為 1.0 ，該數值所產生的增益會使整個畫面充滿噪點。",
|
||||
"how much the image should look like the previou one and new image frame init. strength schedule might be better if this is higher, around .75 during the keyfames you want to switch on": "上一圖像和現在的圖像的相似程度和新圖像的初始化強度。設定更高的值對強度調度計劃會更好，在你想切換關鍵幀中，圍繞 0.75 設定",
|
||||
"How much to blur the mask before processing, in pixels.": "處理前要對遮罩進行多強的模糊，以畫素為單位",
|
||||
"How often, in seconds, to flush the pending tensorboard events and summaries to disk.": "多少秒刷新一次待辦 TensorBoard 事件和摘要到磁碟上",
|
||||
"How sharp the transition should be between blended and not blended.": "混合與非混合之間的過渡尖銳程度。",
|
||||
"How should Style Names Rendered on UI": "樣式名稱的 UI 渲染方式",
|
||||
"How strongly partially masked content should be preserved.": "部分遮罩內容應被保留的強度。",
|
||||
"How strongly the original mask should bias the difference threshold.": "原始遮罩偏離差異閾值的程度。",
|
||||
"How strong of a variation to produce. At 0, there will be no effect. At 1, you will get the complete picture with variation seed (except for ancestral samplers, where you will just get something).": "想要產生多強烈的變化。設為 0 時，將沒有效果。設為 1 時，你將獲得完全產自差異隨機種子的圖像（此功能對帶有 a 後綴的取樣器無效）",
|
||||
"How to complete nested wildcard paths": "萬用字元嵌套路徑補全方式",
|
||||
"How to complete nested wildcard paths (e.g. \"hair/colours/light/...\")": "萬用字元嵌套路徑補全方式 (例如: \"hair/colors/light/...\")",
|
||||
|
|
@ -3312,6 +3318,7 @@
|
|||
"Mask Target (e.g., girl, cats)": "遮罩目標（如 girl, cats）",
|
||||
"Mask Threshold": "遮罩閾值",
|
||||
"Mask transparency": "遮罩透明度",
|
||||
"Mask Upload": "上傳遮罩",
|
||||
"Mask x(→) offset": "遮罩 X 軸 (→) 偏移",
|
||||
"Mask x(→) offset 10th": "遮罩 X 軸 (→) 偏移",
|
||||
"Mask x(→) offset 2nd": "遮罩 X 軸 (→) 偏移",
|
||||
|
|
@ -4013,6 +4020,7 @@
|
|||
"Output Paths": "輸出路徑",
|
||||
"Output per image:": "單獨輸出每張圖像：",
|
||||
"output resolution": "輸出解析度",
|
||||
"Output Root": "Output 目錄根目錄",
|
||||
"outputs": "輸出",
|
||||
"Output settings: all settings (including fps and max frames)": "輸出設定：所有設定（包括幀率和最大幀數）",
|
||||
"Output style": "輸出類型",
|
||||
|
|
@ -4130,6 +4138,7 @@
|
|||
"Pipeline": "管線",
|
||||
"Pix2Pix img CFG schedule": "Pix2Pix 圖像CFG排程",
|
||||
"Pixel Art": "Pixel Art (像素藝術)",
|
||||
"Pixel Composite Settings": "像素合成設定",
|
||||
"Pixelize": "像素化",
|
||||
"Pixel Perfect": "完美像素",
|
||||
"Pixel size": "像素尺寸",
|
||||
|
|
@ -5130,6 +5139,7 @@
|
|||
"sharpen face": "銳化臉部",
|
||||
"Sharpness": "銳度",
|
||||
"Sharpness:": "銳化度",
|
||||
"Shifts when preservation of original content occurs during denoising.": "降噪過程中, 原始畫面保留比例隨採樣迭代步數變化的調度函式偏離量。",
|
||||
"should be 2 or lower.": "必須小於等於 2",
|
||||
"Shoulder To Hip": "肩臀距離",
|
||||
"Shoulder Width": "肩寬",
|
||||
|
|
@ -5258,6 +5268,7 @@
|
|||
"softedge_hedsafe": "SoftEdge_HEDSafe (軟邊緣檢測 - 保守 HED 算法)",
|
||||
"softedge_pidinet": "SoftEdge_PiDiNet (軟邊緣檢測 - PiDiNet 算法)",
|
||||
"softedge_pidisafe": "SoftEdge_PiDiNetSafe (軟邊緣檢測 - 保守 PiDiNet 算法)",
|
||||
"softedge_teed": "softedge_teed (軟邊緣檢測 - 高效邊緣檢測)",
|
||||
"Soft inpainting": "柔和重繪",
|
||||
"Soft inpainting allows you to": "柔和區域重繪可以",
|
||||
"soft_light": "柔光",
|
||||
|
|
@ -5420,7 +5431,9 @@
|
|||
"Styles allow you to add custom text to prompt. Use the {prompt} token in style text, and it will be replaced with user's prompt when applying style. Otherwise, style's text will be added to the end of the prompt.": "預設樣式允許自行新增自訂文本到提示詞中。\n在預設樣式文本中使用 {prompt} 詞元，在套用預設樣式時，它將被使用者的提示詞所替代。\n不然的話，預設樣式文本會被新增到提示詞末尾。",
|
||||
"Style Selector": "樣式選擇器",
|
||||
"Styles: refresh": "預設樣式: 刷新",
|
||||
"Subdirectory": "子目錄",
|
||||
"Sub directory depth": "子目錄深度",
|
||||
"Subdirectory (even temp dir)": "子目錄 (包括臨時目錄)",
|
||||
"Sub folder:": "子目錄: ",
|
||||
"Sub-folder": "子目錄",
|
||||
"Sub Folder:": "子目錄: ",
|
||||
|
|
@ -6272,6 +6285,7 @@
|
|||
"Weight values": "權重值",
|
||||
"Weight_values": "權重值",
|
||||
"Welcome to LightDiffusionFlow! \\(^o^)/~": "歡迎使用 LightDiffusionFlow! \\(^o^)/~",
|
||||
"What directory the [📂] button opens": "選擇 [📂] 按鈕開啟的目錄目錄",
|
||||
"What to put inside the masked area before processing it with Stable Diffusion.": "在使用 Stable Diffusion 處理遮罩區域之前要在遮罩區域內放置什麼",
|
||||
"When adding extra network such as Hypernetwork or Lora to prompt, use this multiplier for it.": "當將額外網路（如 Hypernetwork 或 LoRA）新增到提示時，使用此乘數。",
|
||||
"When adding to prompt, refer to lora by": "在新增到提示詞時，通過以下格式提及lora",
|
||||
|
|
|
|||
Loading…
Reference in New Issue