5316 lines
387 KiB
JSON
5316 lines
387 KiB
JSON
{
|
||
"= '": " = ' ",
|
||
"🗃️": "📦",
|
||
"(0 = default (~0.03); minimum noise strength for k-diffusion noise scheduler)": "(0 = 默认 (~0.03); k-diffusion 噪声调度器的最小噪声强度)",
|
||
"(0 = default (~14.6); maximum noise strength for k-diffusion noise schedule)": "(0 = 默认 (~14.6); k-diffusion 噪声调度器的最大噪声强度)",
|
||
"(0 = default (~14.6); maximum noise strength for k-diffusion noise scheduler)": "(0 = 默认 (~14.6); k-diffusion 噪声调度器的最大噪声强度)",
|
||
"(0 = default (7 for karras, 1 for polyexponential); higher values result in a more steep noise schedule (decreases faster))": "(0 = 默认 (karras 选择 7, polyexponential 选择 1); 值越高噪声调度曲线越陡峭 (递减更快速))",
|
||
"(0 = default (7 for karras, 1 for polyexponential); higher values result in a steeper noise schedule (decreases faster))": "(0 = 默认 (karras 设置 7, polyexponential 设置 1); 值越高会得到越陡峭的噪声调度曲线 (递减更快速))",
|
||
"(0 = disable)": "(0 = 禁用)",
|
||
"(0 = disabled (default); should be lower than denoising strength)": "(0 = 禁用 (默认); 设置的数值应小于重绘幅度)",
|
||
"(0=disable, higher=faster)": "(0 = 禁用, 数值越大 = 越快速)",
|
||
"(0 = inf; end value of the sigma range; only applies to Euler, Heun, and DPM2)": "(0 = inf; sigma 波动范围的最大值; 仅作用于 Euler, Heun, 和 DPM2 采样方法)",
|
||
"(0 = maximum effect; 1 = minimum effect)": "(0 = 最大强度; 1 = 最小强度)",
|
||
"(0 = No limit)": "(0 = 无限制)",
|
||
"(0 = no tiling)": "(0 = 不分块)",
|
||
"10. Generate": "10. 生成",
|
||
"10th": "单元 10",
|
||
"{1-3$$artist1|artist2|artist3}": "{1-3$$艺术家1|艺术家2|艺术家3}",
|
||
"180 Degree Rotation": "180 度旋转",
|
||
"1. Create your wildcard library by copying a collection using the dropdown below.": "1. 通过使用下拉菜单复制一个集合来创建您的通配符库。",
|
||
"(1) Face Detection": "(1) 脸部识别",
|
||
"1. Get Model Info by Civitai Url": "从 Civitai 链接拉取模型信息",
|
||
"1. Get your key at": "1. 访问后面的网址获得你的 Key ",
|
||
"1. Go to img2img tab": "1. 前往 图生图 选项卡",
|
||
"-1 means that it is calculated automatically. If both are -1, the size will be the same as the source size.": "-1意味着自动计算。如果宽高都是-1，则将与源视频尺寸相同。",
|
||
"(1 = original size)": "(1 = 原始尺寸)",
|
||
"1st": "单元 1",
|
||
"1st and last digit must be 0 and values should be between 0 and 1. ex:'0, 0.01, 0'": "第一个和最后一个数字必须是 0，其他值应介于 0 和 1 之间。如：’0, 0.01, 0’",
|
||
"1st and last digit must be 1. ex:'1, 2, 1'": "第一个和最后一个数字必须是 1。例：'1, 2, 1'",
|
||
"1. The tags common to all displayed images are shown in comma separated style.": "1. 所有显示图像的共同标签要用逗号分隔的样式显示。\n\n ",
|
||
"{2$$__artist__}": "{2$$__艺术家__}",
|
||
"{2$$artist1|artist2|artist3}": "{2$$艺术家1|艺术家2|艺术家3}",
|
||
"{2$$__artist__|__artist__}": "{2$$__艺术家__|__艺术家_}",
|
||
"{2::artist1|artist2}": "{2::艺术家1|艺术家2}",
|
||
"2. Click on any of the files that appear in the tree to edit them.": "2. 单击列表中出现的文件来进行编辑。",
|
||
"(2) Crop and Resize the Faces": "(2) 裁切和调整脸部大小",
|
||
"2D & 3D operator to move canvas left/right in pixels per frame": "以每帧多少像素为单位向左/向右移动画布的 2D&3D 操作",
|
||
"2D & 3D operator to move canvas up/down in pixels per frame": "以每帧多少像素为单位向上/向下移动画布的 2D&3D 操作",
|
||
"2D and 3D settings": "2D 与 3D 设定",
|
||
"2D operator that scales the canvas size, multiplicatively. [static = 1.0]": "缩放画布大小的2D操作符，以倍数缩放。[static=1.0]",
|
||
"2D operator to rotate canvas clockwise/anticlockwise in degrees per frame": "2D 操作器对每帧动画顺时针/逆时针旋转所指定的角度",
|
||
"2D or 3D animation_mode": " 2D 或 3D 动画模式中",
|
||
"2nd": "单元 2",
|
||
"2. Refresh checkpoint list after authentication to get available checkpoints": "2. 完成认证后刷新 CheckPoint 列表获得可用的 CheckPoint",
|
||
"2. Select [ebsynth utility] in the script combo box": "2. 在脚本框里选择 [ebsynth utility]",
|
||
"2. When changes are applied, all tags in each displayed images are replaced.": "当应用更改时，所有所显示的图像的标签将会被替换",
|
||
"360 Panorama to 3D": "360°全景图转 3D",
|
||
"3D Fov settings:": "3D 视野设置:",
|
||
"3d glb": "3D (GLB 格式)",
|
||
"3D Mesh": "3D 网格",
|
||
"3D Openpose": "3D 骨架模型编辑 （3D Openpose）",
|
||
"3D operator to move canvas towards/away from view [speed set by FOV]": "将画布靠近/远离镜头的 3D 操作 [速度由视场角设置决定]",
|
||
"3D operator to pan canvas left/right in degrees per frame": "以每帧为单位向左/向右偏移画布的 3D 操作",
|
||
"3D operator to roll canvas clockwise/anticlockwise": "顺时针/逆时针滚动画布的 3D 操作",
|
||
"3D operator to tilt canvas up/down in degrees per frame": "以每帧为单位向上/向下倾斜画布的 3D 操作",
|
||
"3. Download Model": "下载模型",
|
||
"3D settings": "3D 设定",
|
||
"3. Fill in the \"Project directory\" field with ": "3. 在“工程目录”框中填写 ",
|
||
"3. Generate without making your GPU go brrrr!": "3. 生成时不会让你的 GPU 发出咆哮！",
|
||
"3. If you change some tags into blank, they will be erased.": "如果你更改某些标签到空白处，他们将会被移除",
|
||
"3rd": "单元 3",
|
||
"(3) Recreate the Faces": "(3) 脸部重绘",
|
||
"4. If you add some tags to the end, they will be added to the end/beginning of the text file.": "如果你将一些标签添加至末端，它们将被添加在文本文件的开始/末尾。",
|
||
"(4) Paste the Faces": "(4) 脸部融合",
|
||
"4. Select in the \"Mask Mode(Override img2img Mask mode)\" field with ": "4. 在“蒙版模式（覆盖图生图的蒙版模式）”中选择 ",
|
||
"4th": "单元 4",
|
||
"512x Model": "512x 模型",
|
||
"(5) Blend the entire image": "(5) 全图重绘融合",
|
||
"5. Changes are not applied to the text files until the \"Save all changes\" button is pressed.": "在按下保存所有更改的按钮之前，所有在文本文件中所做的更改将不会生效",
|
||
"5. I recommend to fill in the \"Width\" field with ": "5. 建议将“宽度”设置为 ",
|
||
"5th": "单元 5",
|
||
"6. I recommend to fill in the \"Height\" field with ": "6. 建议将“高度”设置为 ",
|
||
"6th": "单元 6",
|
||
"7. I recommend to fill in the \"Denoising strength\" field with lower than 0.35": "7. 建议将“重绘幅度”设置为小于0.35",
|
||
"7th": "单元 7",
|
||
"8. Fill in the remaining configuration fields of img2img. No image and mask settings are required.": "8. 填写图生图其他的设置。不需要设置图像和蒙版。",
|
||
"8th": "单元 8",
|
||
"90 Degree Rotation": "90 度旋转",
|
||
"9. Drop any image onto the img2img main screen. This is necessary to avoid errors, but does not affect the results of img2img.": "9. 拖拽任意图片到图生图主窗口。这样做能有效避免错误，但不会影响图生图的结果。",
|
||
"9th": "单元 9",
|
||
"A1111 txt2img (Euler a)": "AUTOMATIC1111 webui 文生图 (Euler a 采样方法)",
|
||
"A, B or C": "A, B 或 C",
|
||
"About": "关于",
|
||
"Abs": "绝对值",
|
||
"Absolute": "绝对",
|
||
"abs. path or url to audio file": "音频文件的绝对路径或 URL",
|
||
"abstract": "abstract (抽象艺术)",
|
||
"Accent": "强调色",
|
||
"Accent color": "强调色",
|
||
"Accent Generate Button": "强调生成按钮",
|
||
"Access results in ‘Open results’.": "点击“打开最终效果图”获取增强后的图片",
|
||
"According to Live preview subject setting": "实时预览主体设置",
|
||
"Accumulation steps": "累加步数",
|
||
"Action": "操作",
|
||
"Action on existing caption": "对已有标注的操作",
|
||
"Actions": "其他操作",
|
||
"Activate Selected Script": "激活选定脚本",
|
||
"Activation keywords, comma-separated": "该模型的触发词，以逗号分隔",
|
||
"Activation text": "触发词",
|
||
"Active": "启用",
|
||
"Active in img2img": "在图生图激活",
|
||
"Active in img2img (Requires restart)": "在图生图中启用 (需重启)",
|
||
"Active in negative prompts": "在反向提示词输入框激活",
|
||
"Active in negative prompts (Requires restart)": "在反向提示词输入框中启用 (需重启)",
|
||
"Active in third party textboxes": "在第三方扩展文本输入框激活",
|
||
"Active in third party textboxes [Dataset Tag Editor] [Image Browser] [Tagger] [Multidiffusion Upscaler] (Requires restart)": "在第三方文本框中激活标签自动补全 [数据集标签编辑器 (Dataset Tag Editor)] [图库浏览器] [WD1.4标签器(Tagger)] [Multidiffusion 超分辨率] (需重启)",
|
||
"Active in third party textboxes [Dataset Tag Editor] (Requires restart)": "在第三方输入框中启用 [数据集标签编辑器] (需重启)",
|
||
"Active in txt2img": "在文生图激活",
|
||
"Active in txt2img (Requires restart)": "在文生图中启用 (需重启)",
|
||
"Active Layer Only": "仅发送图层",
|
||
"Active: peak amount of video memory used during generation (excluding cached data)": "活动：生成过程中使用的显存峰值（不含缓存数据）",
|
||
"A custom name to use when saving .ckpt and .pt files. Subdirectories will also be named this.": "一个在保存 .ckpt 和 .pt 文件时使用的自定义名称。子目录也会以此命名。",
|
||
"Adam Weight Decay": "Adam 权重衰减 (Weight Decay)",
|
||
"AdamW Weight Decay": "AdamW 权重衰减 (Weight Decay)",
|
||
"Adaptive (Gaussian)": "自适应（高斯）",
|
||
"Adaptive (Mean)": "自适应（平均值）",
|
||
"add": "新增",
|
||
"➕ Add": "➕ 添加",
|
||
"Add": "添加",
|
||
"Add additional prompting to the prefix, suffix and negative prompt in this screen. The actual prompt fields are ignored.": "在此场景下添加附加提示词到前缀、后缀、反向提示词。实际的提示词段会被忽略。",
|
||
"Add additional prompts to the head": "在起始添加额外的提示词",
|
||
"Add ALL Displayed": "添加所有当前显示的图片",
|
||
"Add a prompt prefix, suffix and the negative prompt in the respective fields. They will be automatically added during processing.": "在相应的字段中添加提示词前缀、后缀和反向提示词。它们会在处理过程中被自动添加。",
|
||
"Add a second progress bar to the console that shows progress for an entire job.": "向控制台添加第二个进度条以显示作业的整体进度",
|
||
"add audio to video from file/url or init video": "从文件/链接或初始视频中提取音频以完成添加",
|
||
"Add background image": "添加背景图片",
|
||
"Add Background image": "添加背景图片",
|
||
"Add Background Image": "添加背景图片",
|
||
"Add Blur": "添加模糊",
|
||
"Add Custom Mappings": "添加自定义映射",
|
||
"Add Detail": "添加细节",
|
||
"Add difference": "差额叠加",
|
||
"Add difference:A+(B-C)*alpha": "差额叠加: A+(B-C)*α",
|
||
"Added": "已添加",
|
||
"Add extended info (seed, prompt) to filename when saving grid": "保存网格图时，将扩展信息（随机种子、提示词）添加到文件名",
|
||
"Add hypernetwork to prompt": "将 hypernetwork 添加到提示词",
|
||
"Add image number to grid": "在网格图上添加图像编号",
|
||
"Add inpaint batch mask directory to enable inpaint batch processing.": "添加重绘蒙版目录以启用重绘蒙版功能",
|
||
"Additional cli arguments to pass to ComfyUI (requires reload UI. Do NOT prepend --comfyui-, these are directly forwarded to comfyui)": "ComfyUI 附加的额外启动参数 (需要重载 UI。请勿在此添加 --comfyui- 前缀)",
|
||
"Additional components": "附加组件",
|
||
"Additional description": "附加说明",
|
||
"Additional Generation Info": "附加生成信息",
|
||
"Additional Networks": "Additional Networks",
|
||
"Additional options": "附加选项",
|
||
"Additional tags (comma split)": "附加标签 (逗号分隔)",
|
||
"Additional tags (split by comma)": "附加标签 (逗号分隔)",
|
||
"Add last frame to keyframes": "设置最后一帧为关键帧",
|
||
"Add layer normalization": "启用网络层归一化处理",
|
||
"Add Lora hashes to infotext": "添加 Lora 的哈希值文本到图片信息中",
|
||
"Add Lora to prompt": "将 Lora 添加到提示词",
|
||
"Add LyCORIS to prompt": "将 LyCORIS 添加到提示词",
|
||
"Add mask by sketch": "根据草图添加蒙版",
|
||
"Add merge recipe metadata": "添加融合配方信息",
|
||
"Add model hash to generation information": "将模型哈希值添加到生成信息",
|
||
"Add model name to generation information": "将模型名称添加到生成信息",
|
||
"AddNet Model 1": "附加模型 1",
|
||
"AddNet Model 2": "附加模型 2",
|
||
"AddNet Model 3": "附加模型 3",
|
||
"AddNet Model 4": "附加模型 4",
|
||
"AddNet Model 5": "附加模型 5",
|
||
"AddNet TEnc Weight 1": "附加模型 1 Text Encoder 权重",
|
||
"AddNet TEnc Weight 2": "附加模型 2 Text Encoder 权重",
|
||
"AddNet TEnc Weight 3": "附加模型 3 Text Encoder 权重",
|
||
"AddNet TEnc Weight 4": "附加模型 4 Text Encoder 权重",
|
||
"AddNet TEnc Weight 5": "附加模型 5 Text Encoder 权重",
|
||
"AddNet UNet Weight 1": "附加模型 1 UNet 权重",
|
||
"AddNet UNet Weight 2": "附加模型 2 UNet 权重",
|
||
"AddNet UNet Weight 3": "附加模型 3 UNet 权重",
|
||
"AddNet UNet Weight 4": "附加模型 4 UNet 权重",
|
||
"AddNet UNet Weight 5": "附加模型 5 UNet 权重",
|
||
"AddNet Weight 1": "附加模型 1 权重",
|
||
"AddNet Weight 2": "附加模型 2 权重",
|
||
"AddNet Weight 3": "附加模型 3 权重",
|
||
"AddNet Weight 4": "附加模型 4 权重",
|
||
"AddNet Weight 5": "附加模型 5 权重",
|
||
"Add network to prompt": "将 Lora 等模型添加到提示词",
|
||
"Add new prompts": "添加新提示词",
|
||
"Add N to seed when repeating": "重复时在种子数上加 N",
|
||
"Add number to filename when saving": "在文件名前添加序号",
|
||
"Add program version to generation information": "将项目版本添加到生成信息",
|
||
"add prompt by image": "按图像信息添加提示词",
|
||
"Add/Remove...": "添加/删除...",
|
||
"Address": "地址",
|
||
"Address of the ComfyUI server as seen from the webui. Only used by the extension to load the ComfyUI iframe (requires reload UI)": "ComfyUI 前端服务器访问地址，仅用于嵌套 ComfyUI 网页框架 (需要重载 UI)",
|
||
"Add selection [Enter]": "添加选择 [输入]",
|
||
"Add Smart-Steps minimum step and ToMe merging ratio value to generation information.": "将优化迭代步数和TOME合并比率数值信息添加到图像生成信息中",
|
||
"Add soundtrack": "添加音轨",
|
||
"'add_soundtrack' and 'soundtrack_path' aren't being honoured in \"Interpolate an existing video\" mode. Original vid audio will be used instead with the same slow-mo rules above.": "‘添加音频’和‘音频路径’将不会在‘插入现有视频’模式中执行，原有视频的音频将会使用相同的慢动作规则设置",
|
||
"Add Textual Inversion hashes to infotext": "将 Textual Inversion 哈希值添加到生成信息",
|
||
"Add to / replace in saved directories": "添加/替换 已保存的目录",
|
||
"Add to Sequence X": "添加到 X 轴",
|
||
"Add to Sequence Y": "添加到 Y 轴",
|
||
"Add trigger words to prompt": "一键添加本模型的触发词到提示词输入框",
|
||
"Add user name to generation information when authenticated": "将已认证的用户名添加到生成信息",
|
||
"Add Vectorscope CC parameters to generation information": "向生成信息中添加 Vectorscope CC 参数",
|
||
"Add weights to Sequence X": "将权重添加到 X 序列中",
|
||
"ADetailer CFG scale": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 10th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 2nd": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 3rd": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 4th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 5th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 6th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 7th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 8th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CFG scale 9th": "After Detailer 提示词引导系数 (CFG scale)",
|
||
"ADetailer CLIP skip": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 10th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 2nd": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 3rd": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 4th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 5th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 6th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 7th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 8th": "After Detailer CLIP 终止层数",
|
||
"ADetailer CLIP skip 9th": "After Detailer CLIP 终止层数",
|
||
"ADetailer confidence threshold %": "置信阈值 (单位: %)",
|
||
"ADetailer denoising strength": "重绘幅度",
|
||
"ADetailer erosion (-) / dilation (+)": "图像腐蚀 (-) / 图像膨胀 (+)",
|
||
"ADetailer mask blur": "重绘蒙版边缘模糊度",
|
||
"ADetailer model": "After Detailer 模型",
|
||
"ADetailer model 10th": "After Detailer 模型",
|
||
"ADetailer model 2nd": "After Detailer 模型",
|
||
"ADetailer model 3rd": "After Detailer 模型",
|
||
"ADetailer model 4th": "After Detailer 模型",
|
||
"ADetailer model 5th": "After Detailer 模型",
|
||
"ADetailer model 6th": "After Detailer 模型",
|
||
"ADetailer model 7th": "After Detailer 模型",
|
||
"ADetailer model 8th": "After Detailer 模型",
|
||
"ADetailer model 9th": "After Detailer 模型",
|
||
"ADetailer negative prompt": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 10th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 2nd": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 2nd\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 3rd": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 3rd\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 4th": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 4th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 5th": "After Detailer 反向提示词",
|
||
"ADetailer negative prompt 5th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 6th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 7th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 8th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt 9th\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer negative prompt\nIf blank, the main negative prompt is used.": "ADetailer 反向提示词\n如果 ADetailer 的反向提示词为空，则使用默认的反向提示词",
|
||
"ADetailer prompt": "After Detailer 正向提示词",
|
||
"ADetailer prompt 10th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 2nd": "After Detailer 正向提示词",
|
||
"ADetailer prompt 2nd\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 3rd": "After Detailer 正向提示词",
|
||
"ADetailer prompt 3rd\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 4th": "After Detailer 正向提示词",
|
||
"ADetailer prompt 4th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 5th": "After Detailer 正向提示词",
|
||
"ADetailer prompt 5th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 6th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 7th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 8th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt 9th\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer prompt\nIf blank, the main prompt is used.": "ADetailer 提示词\n如果 ADetailer 的提示词为空，则使用默认提示词",
|
||
"ADetailer sampler": "After Detailer 采样方法",
|
||
"ADetailer sampler 10th": "After Detailer 采样方法",
|
||
"ADetailer sampler 2nd": "After Detailer 采样方法",
|
||
"ADetailer sampler 3rd": "After Detailer 采样方法",
|
||
"ADetailer sampler 4th": "After Detailer 采样方法",
|
||
"ADetailer sampler 5th": "After Detailer 采样方法",
|
||
"ADetailer sampler 6th": "After Detailer 采样方法",
|
||
"ADetailer sampler 7th": "After Detailer 采样方法",
|
||
"ADetailer sampler 8th": "After Detailer 采样方法",
|
||
"ADetailer sampler 9th": "After Detailer 采样方法",
|
||
"ADetailer steps": "After Detailer 迭代步数",
|
||
"ADetailer steps 10th": "After Detailer 迭代步数",
|
||
"ADetailer steps 2nd": "After Detailer 迭代步数",
|
||
"ADetailer steps 3rd": "After Detailer 迭代步数",
|
||
"ADetailer steps 4th": "After Detailer 迭代步数",
|
||
"ADetailer steps 5th": "After Detailer 迭代步数",
|
||
"ADetailer steps 6th": "After Detailer 迭代步数",
|
||
"ADetailer steps 7th": "After Detailer 迭代步数",
|
||
"ADetailer steps 8th": "After Detailer 迭代步数",
|
||
"ADetailer steps 9th": "After Detailer 迭代步数",
|
||
"ADetailer x(→) offset": "X轴 (→) 偏移",
|
||
"ADetailer y(↑) offset": "Y轴 (↑) 偏移",
|
||
"A directory on the same machine where the server is running.": "服务器主机上某一目录",
|
||
"A directory or a file": "一个文件或文件夹",
|
||
"Adjust brush size": "调整画笔大小",
|
||
"adjust denoise each img2img batch": "调整每个图生图批次的重绘幅度",
|
||
"adjusts the aspect ratio for the depth calculation (normally 1)": "调节深度计算的纵横比 (通常为 1)",
|
||
"adjusts the aspect ratio for the depth calculations": "调整深度计算的纵横比",
|
||
"Adjusts the generated prompt. You will need to experiment with this setting.": "调整生成的提示词，使用时要不断尝试并调整此设置",
|
||
"adjusts the overall contrast per frame [default neutral at 1.0]": "调整每帧图像的整体对比度 [默认值为1.0]",
|
||
"adjusts the overall contrast per frame [neutral at 1.0, recommended to *not* play with this param]": "调整每帧图像的整体对比度 [默认值为1.0，*不* 推荐使用此参数]",
|
||
"adjusts the scale at which the canvas is moved in 3D by the translation_z value. [maximum range -180 to +180, with 0 being undefined. Values closer to 180 will make the image have less depth, while values closer to 0 will allow more depth]": "通过平移 Z 调整画布在三维空间中移动的比例 [最大范围 -180 至 +180 ，0 值未定义。接近 180 会降低图像的纵深感，而接近 0 会增加］",
|
||
"Adjusts the size of the image by multiplying the original width and height by the selected value. Ignored if either Resize width to or Resize height to are non-zero.": "通过将原宽度和高度乘以选定值来调整图像的大小。如果宽度调整为非零或高度调整为非零，则忽略。",
|
||
"Adjust strength": "调整强度",
|
||
"adjust the brightness of the mask. Should be a positive number, with 1.0 meaning no adjustment.": "调整蒙版的亮度。该值应该为正数，1.0 表示无调整",
|
||
"Adjust tilt for detected faces": "调节俯仰以便检测面部",
|
||
"Admirable": "极好的",
|
||
"ads": "含广告",
|
||
"Advanced": "高级",
|
||
"Advanced editing": "进阶编辑",
|
||
"Advanced options": "高级选项",
|
||
"Advanced Options": "高级选项",
|
||
"Advanced Settings": "高级设置",
|
||
"Aesthetic Image Scorer": "美术风格评分",
|
||
"aesthetic_score": "美学评分",
|
||
"Affected areas": "匹配区域",
|
||
"Affects optical flow hybrid motion. 1 is normal flow. -1 is negative flow. 0.5 is half flow, etc...": "影响光流合成运动。1为正常流量；-1为负流量；0.5为半流量，以此类推...",
|
||
"Affine": "仿射",
|
||
"A file on the same machine where the server is running.": "服务器所在主机上的文件",
|
||
"After": "之后",
|
||
"After Generation": "完成生成后",
|
||
"A generic prompt used to generate a sample image to verify model fidelity.": "用于生成样本图像来检验模型的忠诚度的通用提示词。",
|
||
"Aggressive": "激进",
|
||
"A higher temperature will produce more diverse results, but with a higher risk of less coherent text": "较高的 Temperature 值会产生更加多样化的结果，但输出文本不连贯的风险也较高",
|
||
"A integrated translator for translating prompts to English using Deepl or Baidu.": "一个通过 DeepL 或百度将提示词翻译成英文的集成翻译器。",
|
||
"Alias from file": "从文件读取别名",
|
||
"all": "全部",
|
||
"All": "全部",
|
||
"All Displayed Ones": "所有已显示的",
|
||
"all - force multiple --> idea by redditor WestWordHoeDown, it forces to choose between 2 and 3 image types": "all -- 全部 - 强制混合 --> 来自于 redditor: WestWordHoeDown 的创意，强制选择 2-3 种图像类型。",
|
||
"All models in this directory will receive the selected model's metadata": "此目录下所有模型都将被粘贴与选中模型完全相同的元数据",
|
||
"all --> normally picks a image type as random. Can choose a ‘other’ more unique type.": "all -- 全部 --> 通常会随机选择一个图像类型。可以选择一个 \"其他\" 更独特的类型。",
|
||
"Allow detectmap auto saving": "允许自动保存检测图 (detected maps)",
|
||
"Allow img2img": "允许图生图",
|
||
"Allow manually uploading pnginfo from the uploaded plugin image to txt2img or img2img.": "允许从扩展中已上传的图像中手动上传 PNG 图片信息到文生图或图生图",
|
||
"Allow NSFW": "允许成人内容",
|
||
"Allow other script to control this extension": "允许其他脚本控制此扩展",
|
||
"allow overwrite": "允许覆盖文件",
|
||
"Allow overwrite output-model": "允许输出时覆盖同名模型",
|
||
"Allow Preview": "允许预览",
|
||
"Allows for random parameters during txt2img generation. This script is processed for all generations, regardless of the script selected, meaning this script will function with others as well, such as AUTOMATIC1111/stable-diffusion-webui-wildcards": "允许在文生图的生成期间使用随机的参数。无论选择哪种脚本，此脚本都会针对所有的生成进行处理，这意味着此脚本也可以与其他脚本一起使用，如通配符",
|
||
"allows keyframing different samplers. Use names as they appear in ui dropdown in 'run' tab": "允许为不同关键帧使用不一样的采样方法，使用出现在运行参数选项卡中的采样方法下拉选项的名字",
|
||
"allows keyframing different sd models. use *full* name as appears in ui dropdown": "允许关键帧使用不同的 SD 模型。使用出现在 UI 中 Stable Diffusion 模型下拉选项的模型 *完整* 名称",
|
||
"Allows the model to learn brightness and contrast with greater detail during training. Value controls the strength of the effect, 0 disables it.": "允许模型在训练过程中更详尽地学习亮度和对比度。本选项数值控制学习效果的强弱，0 则不生效。",
|
||
"Allows you to easily, or even completely automatically start using HTTPS.": "允许您轻松地，甚至完全自动地开始使用 HTTPS。",
|
||
"🔄 All Reset": "🔄 全部重置",
|
||
"alpha": "α",
|
||
"Alphabetical Order": "字母顺序",
|
||
"Alpha (default is half of Net dim)": "Alpha 值 (默认为网络维度的一半)",
|
||
"Alpha matting": "Alpha 遮罩",
|
||
"alpha threshold": "透明度阈值",
|
||
"Alpha threshold": "透明度阈值",
|
||
"also delete off-screen images": "允许同时删除屏幕外的图片",
|
||
"also enable wierd blocky upscale mode": "同时启用糟糕的分块放大模式",
|
||
"alternate": "交替",
|
||
"Alternate Steps": "交替迭代",
|
||
"Alternatively, if one wants to keep faraway details, one may instead make them smaller and closer than they physically would be (in order to fit nicely into the limited depth space).": "或者，如果想保留远处的细节，可以让它们比实际上更小、更近，以便很好地适应有限的深度空间。",
|
||
"Alternatively, use": "或者, 使用 ",
|
||
"Alternatively, you can enable": "或者，您可以启用",
|
||
"Alt+left/right moves prompt elements": "使用 Alt+ ←/→ 移动提示词内容",
|
||
"Always": "保持",
|
||
"Always append space if inserting at the end of the textbox": "如果在文本输入框的末尾插入，总是附加空格",
|
||
"Always discard next-to-last sigma": "始终舍弃倒数第二个 sigma 值",
|
||
"Always Display Buttons": "总是显示按钮",
|
||
"Always fully": "补全完整嵌套",
|
||
"Always print all generation info to standard output": "始终将所有生成信息输出到控制台",
|
||
"Always save all generated image grids": "始终保存所有生成的网格图",
|
||
"Always save all generated images": "始终保存所有生成的图像",
|
||
"Always show all networks on the Lora page": "在 Lora 页面保持显示所有模型",
|
||
"A merger of the two checkpoints will be generated in your": "合并后的模型将保存在您的",
|
||
"(amount of additional noise to counteract loss of detail during sampling)": "(用于抵消采样过程中丢失细节的额外噪声量)",
|
||
"(amount of additional noise to counteract loss of detail during sampling; only applies to Euler, Heun, and DPM2)": "(用于抵消采样过程中丢失细节的额外噪声量; 仅作用于 Euler, Heun, 和 DPM2 采样方法)",
|
||
"amount of graininess to add per frame for diffusion diversity": "每帧增加的颗粒度数量，用于扩散多样性",
|
||
"Amount of images to generate": "图像生成数量",
|
||
"amount of presence of previous frame to influence next frame, also controls steps in the following formula [steps - (strength_schedule * steps)]": "前一帧影响下一帧的存在量，也控制下式中的步数：[steps - (strength_schedule * steps)]",
|
||
"(amount of stochasticity; only applies to Euler, Heun, and DPM2)": "(随机流失率大小; 仅作用于 Euler, Heun, 和 DPM2 采样方法)",
|
||
"Amount of time to pause between Epochs (s)": "每次暂停的时长 (s)",
|
||
"Amount of tries": "尝试次数",
|
||
"Amount schedule": "强度计划",
|
||
"Amount times to repeat upscaling with IMG2IMG (loopback)": "通过图生图放大的重复次数 (回送)",
|
||
"Amplification of distortion of circles": "圆形变形的放大倍数",
|
||
"Analysis": "分析",
|
||
"Analysis Mode": "分析模式",
|
||
"Analyze": "分析",
|
||
"Analyzes video frames for camera motion and applies movement to render.": "分析视频帧中的镜头运动, 并将运动应用于渲染",
|
||
"Ancestral ETA Schedule": "Ancestral ETA 调度计划",
|
||
"and": "与",
|
||
"AND": "与",
|
||
"and drop a star if you like it!": ", 如果喜欢本插件的话还请点个 Star !",
|
||
"and generate images according to random segmentation which preserve image layout.": " 来根据保存图像的布局随机分割生成图像。",
|
||
"and report your problem.": "反馈遇到的问题",
|
||
"and restart webui, and enjoy the joy of creation!": "并重启 webui，享受创作的乐趣！",
|
||
", and the underlying": "，底层 ",
|
||
"and upscale to the size of the original video.": "放大图片到原始视频的尺寸。",
|
||
"A negative prompt for the generic sample image.": "用于生成样本图像的通用反向提示词。",
|
||
"A negative prompt to use when generating class images. Can be empty.": "生成类别图像时使用的反向提示词。可留空。",
|
||
"A negative prompt to use when generating preview images.": "用于生成预览图像的反向提示词。",
|
||
"Angle": "角度",
|
||
"angular": "angular (棱角)",
|
||
"animal": "animal (动物)",
|
||
"animal - A random (fictional) animal. Has a chance to have human characteristics, such as clothing added.": "animal - 动物 - 一只随机的（虚构的）动物。可能会拥有人类的特征，如穿衣服。",
|
||
"animation": "动画",
|
||
"Animation mode": "动画模式",
|
||
"anime": "anime (动漫)",
|
||
"Anime": "动漫",
|
||
"Anime-inclined great guide (by FizzleDorf) with lots of examples:": "很不错的、带有许多示例的动画指南 (由 FizzleDorf 制作) : ",
|
||
"anime key visual": "anime key visual (动漫主视觉图/海报)",
|
||
"Anime Remove Background": "动漫移除背景模式",
|
||
"Anime Style (Up Detection, Down mask Quality)": "动漫风格模式 (提高识别能力, 降低蒙版质量)",
|
||
"Annotator resolution": "预处理器分辨率",
|
||
"Answer": "响应",
|
||
"Anti Blur": "模糊抑制",
|
||
"API endpoint": "API 端点",
|
||
"API Endpoint": "API 端点",
|
||
"API info may not be necessary for some boorus, but certain information or posts may fail to load without it. For example, Danbooru doesn't show certain posts in search results unless you auth as a Gold tier member.": "API 信息对于某些 booru 站点可能不是必需的，但如果没有它，某些信息或图帖可能无法加载。 例如，除非你的 API 验证属于黄金会员，否则 Danbooru 可能不会在搜索结果中显示某些图帖。",
|
||
"API key": "API Key",
|
||
"API Key": "API 密钥",
|
||
"API Keys": "API 密钥",
|
||
"append": "追加",
|
||
"Append": "追加至末尾",
|
||
"Append Artist tags from CLIP": "使用来自 CLIP 的艺术家标签",
|
||
"Append Caption to File Name": "将描述文本追加到文件名之后",
|
||
"Append comma on tag autocompletion": "自动添加逗号",
|
||
"Append commas": "追加逗号",
|
||
"Append DeepDanbooru to Caption": "把 DeepDanbooru 的结果追加到已有的描述文本之后",
|
||
"Append Flavor tags from CLIP": "使用来自 CLIP 的风格标签",
|
||
"Append Hires prompts to the end of the original prompts instead of replacing it.": "将高分辨率修复提示词追加到原始提示词的末尾，而不是替换它们",
|
||
"Append interrogated prompt at each iteration": "在每次迭代时添加何种反推模型反推出的提示词",
|
||
"Append Medium tags from CLIP": "使用来自 CLIP 的介质标签",
|
||
"Append png info to prompts": "将 PNG 信息添加到提示词中",
|
||
"Append prompts, not replace": "追加提示词 (非替换)",
|
||
"Append space on tag autocompletion": "标签补全后自动添加空格",
|
||
"Apply": "应用",
|
||
"Apply all selected styles from the style selction dropdown in main UI to the prompt.": "从主界面的预设样式选择下拉菜单中将所有选定的预设样式应用到提示词。",
|
||
"Apply and quit": "应用更改并退出",
|
||
"Apply and restart UI": "应用更改并重启",
|
||
"Apply block weight from text": "从文本框应用分块权重值",
|
||
"Apply changes to ALL displayed images": "将更改应用于所有已显示的图像",
|
||
"Apply changes to filtered images": "应用更改至过滤后的图片",
|
||
"Apply changes to selected image": "将更改应用于所选图像",
|
||
"Apply color correction to img2img results to match original colors": "对图生图结果应用颜色校正以匹配原始颜色",
|
||
"Apply color correction to img2img results to match original colors.": "对图生图结果应用颜色校正以匹配原始颜色",
|
||
"apply colormatch before adding noise (use with CN's Tile)": "在添加噪声前应用颜色匹配 (和 ControlNet 的 Tile 模型一起使用)",
|
||
"Apply data": "应用数据",
|
||
"Apply horizontal Flip": "应用水平翻转",
|
||
"Apply Horizontal Flip": "应用水平翻转",
|
||
"Apply if any": "应用 (如有)",
|
||
"Apply if any: remove style text from prompt; if any styles are found in prompt, put them into styles dropdown, otherwise keep it as it is.": "应用 (如有): 从提示词中删除对应预设样式文本; 将匹配到的预设样式加入下拉菜单",
|
||
"Apply inside mask only": "仅使用内部蒙版",
|
||
"Apply mask to original image": "应用蒙版到原始图",
|
||
"Apply mask to the Ref Image": "应用蒙版到参考图",
|
||
"Apply mask to the result": "应用蒙版到结果",
|
||
"Apply only selected scripts to ADetailer": "只将选定的脚本应用于 After Detailer",
|
||
"Apply Presets": "应用预设",
|
||
"Apply (Reload UI)": "应用 (重载 UI)",
|
||
"Apply: remove style text from prompt, always replace styles dropdown value with found styles (even if none are found).": "应用: 从提示词中删除对应预设样式文本; 总是将下拉菜单内容替换为相应预设样式名 (即使不存在对应预设)",
|
||
"Apply scripts to faces": "使用脚本识别脸部",
|
||
"Apply selected styles to current prompt": "将所选预设样式插入到当前提示词之后",
|
||
"Apply selection filter": "应用选择过滤器",
|
||
"Apply settings": "保存设置",
|
||
"Apply Settings": "保存设置",
|
||
"Apply to": "应用到",
|
||
"Apply transfer control when loading models": "加载模型时应用控制转移",
|
||
"A prompt describing the subject. Use [Filewords] to parse image filename/.txt to insert existing prompt here.": "描述主题的提示词。使用 [Filewords] 解析图像文件名/.txt 文本文件来在此处插入现有提示词。",
|
||
"A prompt for generating classification/regularization images. See the readme for more info.": "生成分类/正则化图像用的提示词。详细信息请查阅 readme 。",
|
||
"A prompt used to generate a 'baseline' image that will be created with other samples to verify model fidelity.": "用于生成基准图像的提示词。会和其他样本一同生成来检验模型的忠诚度。",
|
||
"a random seed will be used on each frame of the animation": "种子会随机生成并被应用于动画中的每一帧",
|
||
"A range can be provided:": "项数可以有范围",
|
||
"architecture": "architecture (建筑)",
|
||
"Architecture": "架构",
|
||
"Archive filename pattern": "压缩包文件名格式",
|
||
"Area": "区域",
|
||
"Area (large to small)": "面积 (从大到小)",
|
||
"Area lower bound": "图片最小面积（宽*高）",
|
||
"Area upper bound": "图片最大面积（宽*高）",
|
||
"Arguments are case-sensitive.": "参数区分大小写。",
|
||
"Arm Length": "手臂长度",
|
||
"art deco": "art deco (装饰艺术)",
|
||
"Artistic": "艺术",
|
||
"Artists have a major impact on the result. Automatically, it will select between 0-3 artists out of 3483 artists for your prompt.": "Artists (艺术家风格) 对图像结果有很大影响。它会自动从 3483 名艺术家中选择 0-3 名艺术家名作为你提示词的一部分。",
|
||
"art nouveau": "art nouveau (新艺术运动)",
|
||
"Arxiv": "预印本 (Arxiv)",
|
||
"as a UI to define your animation schedules (see the Parseq section in the Init tab).": " 作为定义动画参数表的UI (请参见初始化选项卡中的参数定序器部分) .",
|
||
"Ascending": "升序",
|
||
"A setting of 1 will cause every frame to receive diffusion in the sequence of image outputs. A setting of 2 will only diffuse on every other frame, yet motion will still be in effect. The output of images during the cadence sequence will be automatically blended, additively and saved to the specified drive. This may improve the illusion of coherence in some workflows as the content and context of an image will not change or diffuse during frames that were skipped. Higher values of 4-8 cadence will skip over a larger amount of frames and only diffuse the “Nth” frame as set by the diffusion_cadence value. This may produce more continuity in an animation, at the cost of little opportunity to add more diffused content. In extreme examples, motion within a frame will fail to produce diverse prompt context, and the space will be filled with lines or approximations of content - resulting in unexpected animation patterns and artifacts. Video Input & Interpolation modes are not affected by diffusion_cadence.": "设置为 1 将使每个帧在图像输出序列中生成图像。设置为 2 将每隔一帧进行图像生成，但运动仍然有效。间隔序列期间的图像输出将自动混合、添加并保存到指定驱动器。这可能会改善某些工作流中的一致性错觉，因为图像的内容和上下文在跳过的帧期间不会改变或扩散。更高的间隔值，例如4-8，将跳过更多的帧，并仅生成由生成间隔值设置的“第N”帧。这可能会在动画中产生更多的连续性，但几乎没有机会添加更多的扩散内容。在极端的例子中，帧内的运动将无法产生不同的提示上下文，并且空间将充满线条或近似的内容，从而导致意外的动画模式和伪影。视频输入和插值模式不受生成间隔值的影响。",
|
||
"Aspect Ratio Helper": "纵横比助手",
|
||
"Aspect Ratio schedule": "纵横比调度计划",
|
||
"Attempt to automatically set training parameters based on total VRAM. Still under development.": "尝试根据总显存自动设置训练参数。仍在开发中。",
|
||
"Attention grabber": "Attention grabber (赋予随机提示词权重)",
|
||
"Attention Heatmap": "关键词热力图",
|
||
"Attention texts for visualization. (comma separated)": "待可视化关键词 (逗号分隔)",
|
||
"Audio (if provided) will *not* be transferred to the interpolated video if Slow-Mo is enabled.": "音频 (如果提供了) 在以下选项启用时将不会转码压制进帧插值后的视频内：慢动作",
|
||
"Audio Player 0": "音频播放器 0",
|
||
"Audio Player 1": "音频播放器 1",
|
||
"Audio Player 2": "音频播放器 2",
|
||
"Audio Player 3": "音频播放器 3",
|
||
"Audio Player 4": "音频播放器 4",
|
||
"Audio Player 5": "音频播放器 5",
|
||
"Audio Player 6": "音频播放器 6",
|
||
"Audio Player 7": "音频播放器 7",
|
||
"Author": "作者",
|
||
"Author of this model": "此模型的作者",
|
||
"auto": "自动",
|
||
"Auto": "自动",
|
||
"autocast": "自动转换",
|
||
"Autocomplete options": "自动补全选项",
|
||
"Autocontrast low/high cutoff schedules 0-100. Low 0 High 100 is full range.": "自动对比度低/高隔离调度从 0 到 100。最低值 0 到最高值 100 是整体范围",
|
||
"Auto-contrasts the mask for the composite. If enabled, uses the low/high autocontrast cutoff schedules.": "对蒙版进行自动对比度处理后进行合成。如启用，则使用低/高自动对比度隔离调度计划。",
|
||
"auto-delete imgs when video is ready": "视频完成时自动删除图片",
|
||
"auto-delete inputframes (incl CN ones) when video is ready": "当视频完成时自动删除输入帧 (包括 ControlNet 选项卡中的)",
|
||
"Auto detect size from img2img": "从图生图自动检测图像尺寸",
|
||
"Auto focal point crop": "自动面部焦点剪裁",
|
||
"Auto load and save JSON database": "自动加载并保存 JSON 数据库",
|
||
"automatic": "自动",
|
||
"Automatic": "自动",
|
||
"Automatically expands an image that does not fit completely in the canvas area, similar to manually pressing the S and R buttons": "自动展开不完全匹配画布区域的图像, 相当于手动按下 S 和 R 按钮",
|
||
"Automatically open webui in browser on startup": "启动后自动在浏览器打开 webui 界面",
|
||
"Automatically purge wildcard cache on every generation.": "每次生成时自动清理通配符缓存",
|
||
"Automatically revert VAE to 32-bit floats": "自动恢复 VAE 为 float32",
|
||
"Automatically update your prompt with interesting modifiers. (Runs slowly the first time)": "使用有趣的修饰符自动更新你的提示词。(第一次运行会比较慢)",
|
||
"“automatic” is entirely build around Latent Couple. It will pass artists and the amount of people/animals/objects to generate in the prompt automatically. Set the prompt compounder equal to the amount of areas defined in Laten Couple.": "\"自动\" 是完全围绕 Latent Couple 构建的。它将在提示词中自动传递艺术家和要生成的人/动物/物件的数量。将提示词混合值设置为等于 Latent Couple 中定义的分区数量。",
|
||
"Automaticlly revert VAE to 32-bit floats": "自动恢复 VAE 为 float32",
|
||
"Auto SAM": "自动 SAM",
|
||
"Auto SAM Config": "自动 SAM 配置",
|
||
"Auto SAM is mainly for semantic segmentation and image layout generation, which is supported based on ControlNet. You must have ControlNet extension installed, and you should not change its directory name (sd-webui-controlnet).": "自动 SAM 基于 ControlNet 的支持，主要用于语义分割和图像分层。需安装 ControlNet 扩展，且不能修改其目录名 (sd-webui-controlnet)。",
|
||
"Auto search port": "自动检索端口",
|
||
"Auto segmentation output": "自动语义分割输出",
|
||
"Auto-sized crop": "自动按比例剪裁缩放",
|
||
"Auto Tagging": "自动标记",
|
||
"Auto Tagging option": "自动标记选项",
|
||
"Available": "可下载",
|
||
"Available LORA": "可用的 LORA 模型",
|
||
"Available LORAs": "可用的 LORA 模型",
|
||
"Available LyCORIS": "可用的 LyCORIS 模型",
|
||
"A value that determines the output of random number generator - if you create an image with same parameters and seed as another image, you'll get the same result": "一个决定随机数生成器输出的值 - 以相同参数和相同种子进行多次生成，会得到相同的多张图像\n🎲 将随机种子设置为-1，则每次都会使用一个新的随机数\n♻️ 复用上一次使用的随机种子，对于固定输出结果有用",
|
||
"A weighted sum will be used for interpolation. Requires two models; A and B. The result is calculated as A * (1 - M) + B * M": "最终模型权重是前两个模型按比例相加的结果。需要 A、B 两个模型。计算公式为 A * (1 - M) + B * M",
|
||
"Axis": "轴",
|
||
"a-z": "按首字母正序",
|
||
"Backend": "后端",
|
||
"- Background": "- 背景",
|
||
"Background": "背景",
|
||
"background color": "背景颜色",
|
||
"Background Color": "背景颜色",
|
||
"Background color for image grids": "网格图背景颜色",
|
||
"Background gradiant color": "背景渐变色",
|
||
"Background source(mp4 or directory containing images)": "背景源（mp4 或包含图像的目录）",
|
||
"Background type": "背景类型",
|
||
"Backup original text file (original file will be renamed like filename.000, .001, .002, ...)": "备份原本 txt 文件 (原文件会被重命名，类似于：.000, .001, .002, ...)",
|
||
"Backup/Restore": "备份/恢复",
|
||
"Bake in VAE": "嵌入 VAE 模型",
|
||
"Balance between eyes": "双眼间距平衡",
|
||
"Balanced": "均衡",
|
||
"baroque": "baroque (巴洛克)",
|
||
"Base": "基层值",
|
||
"Base alpha": "α 基数",
|
||
"Base Depth": "基础深度",
|
||
"Base on Stable Diffusion V2": "基于 Stable Diffusion v2 模型",
|
||
"Base Ratio": "基础比率",
|
||
"Base Sampler": "基础采样器",
|
||
"Basic": "基础",
|
||
"Basic info": "基本信息",
|
||
"Basis": "基准",
|
||
"Batch": "批量处理",
|
||
"Batch count": "总批次数",
|
||
"Batch Edit Captions": "批量编辑描述",
|
||
"Batch from Dir": "批量处理文件夹",
|
||
"Batch from directory": "批量处理文件夹",
|
||
"Batch from Directory": "批量处理文件夹",
|
||
"Batch Images": "批处理图像",
|
||
"Batch img2img": "批量图生图",
|
||
"Batch import prompts": "批量导入提示词",
|
||
"Batching": "批量操作",
|
||
"Batch Mode, Resume and more": "批处理模式，恢复和更多",
|
||
"Batch Mode/ run from setting files": "批处理模式 / 从设置文件中加载",
|
||
"Batch name": "批次名称",
|
||
"batch process": "批量处理",
|
||
"Batch process": "批量处理",
|
||
"Batch Process": "批量处理",
|
||
"Batch Run": "批量处理",
|
||
"Batch Settings": "批量处理设置",
|
||
"batch size": "批量大小",
|
||
"Batch size": "单批数量",
|
||
"Batch Size": "单批数量 (Batch Size)",
|
||
"batch size for large queries": "巨量查询的批次数量",
|
||
"batch size in generation": "生成的单批数量",
|
||
"batch size, restore face, hires fix settigns must be set here": "单批数量, 面部修复, 高分辨率修复等功能需要在本页面设置",
|
||
"Batch Size to Simulate": "模拟单批数量 (Batch Size)",
|
||
"Batch-Warp": "批量修复",
|
||
"bauhaus": "bauhaus (包豪斯)",
|
||
"Beam Search": "Beam Search (集束检索)",
|
||
"Before": "之前",
|
||
"Before Motion": "镜头运动前",
|
||
"Beginners guide": "新手指南",
|
||
"Begin train": "开始训练",
|
||
"behind": "落后",
|
||
"behind HEAD": "落后于 HEAD",
|
||
"Below here, you can generate a set of random prompts, and send them to the Workflow prompt field. The generation of the prompt uses the settings in the Main tab.": "在下方可以生成一组随机的提示词，并将它们发送到工作流提示词段。提示词的生成使用主菜单中的选项设置。",
|
||
"Benchmark Data": "基准测试数据",
|
||
"Benchmark level": "基准测试水平",
|
||
"Benchmarks...": "基准测试...",
|
||
"best": "最佳",
|
||
"best practice page": "最佳做法页面",
|
||
"Be sure to check the 'Write prompts to file' checkbox if you don't want to lose the generated prompts. Note, one image is still generated.": "不想丢失生成的提示词的话，需确保勾选 “写入提示词到文件”。\n注意：依旧会生成一张图像",
|
||
"beta": "β",
|
||
"Better": "更好的",
|
||
"Bicubic": "双三次",
|
||
"Bilinear": "双线性",
|
||
"Bilingual Localization": "双语对照本地化",
|
||
"Birthday": "生日",
|
||
"Bitwise operation": "按位 (Bitwise) 运算",
|
||
"Blacklist": "黑名单",
|
||
"Black/Whitelist models": "属于 黑/白名单 的模型",
|
||
"blend": "混合",
|
||
"Blend": "混合",
|
||
"Blend Average": "平均混合",
|
||
"Blend factor max": "最大混合系数",
|
||
"Blend factor slope": "混合斜率系数",
|
||
"Blend mode": "混合模式",
|
||
"BLIP: maximum description length": "BLIP: 最大描述长度",
|
||
"BLIP: minimum description length": "BLIP: 最小描述长度",
|
||
"BLIP: num_beams": "BLIP: 集束搜索候选项数目",
|
||
"Block ID": "区块 ID",
|
||
"Block method": "分块模式",
|
||
"Block size": "区块大小",
|
||
"blur": "模糊",
|
||
"Blur": "模糊",
|
||
"Blur amount:": "模糊度：",
|
||
"Blur edges of final overlay mask, if used. Minimum = 0 (no blur)": "最终覆盖蒙版的边缘模糊 (如启用) 。最小值=0 (无模糊)",
|
||
"- Body": "- 身体",
|
||
"Body Parameters": "身体参数",
|
||
"(booru only)": "(仅 booru)",
|
||
"Booru Score Threshold": "Booru 极限阈值",
|
||
"BOOST (multi-resolution merging)": "BOOST（分块生成后拼合）",
|
||
"border": "边框",
|
||
"Border": "边缘",
|
||
"border frames": "边界帧数",
|
||
"Border Frames": "边界帧数",
|
||
"Border Key Frames": "边界关键帧数",
|
||
"Border mode": "边界处理模式",
|
||
"both": "两者",
|
||
"Both": "两者",
|
||
"both directions": "双向",
|
||
"bottom-top": "下 - 上",
|
||
"box_nms_thresh": "箱体数量阈值",
|
||
"branch": "分支",
|
||
"Branch": "分支",
|
||
"brightness": "亮度",
|
||
"Brightness": "亮度",
|
||
"Brightness:": "明亮度",
|
||
"Bring prompts and setting into one column left side": "将正反提示词输入框和设置移动到左侧",
|
||
"(brush color of inpaint mask)": "(重绘蒙版画笔颜色)",
|
||
"Bucket Cropping": "Bucket Cropping (桶裁剪)",
|
||
"Bucket Steps": "Bucket Steps (桶步数)",
|
||
"built-in": "内置",
|
||
"built with gradio": "基于 Gradio 构建",
|
||
"Built with Gradio": "基于 Gradio 构建",
|
||
"button to free up memory.": " 按钮来释放显存",
|
||
"By comma": "逗号分组",
|
||
"By default and where supported, SVG-Edit can store your editor preferences and SVG content locally on your machine so you do not need to add these back each time you load SVG-Edit. If, for privacy reasons, you do not wish to store this information on your machine, you can change away from the default option below.": "默认情况下，SVG Edit 可以将设置和SVG图像保存在你的电脑上，因此你不需要在每次使用 SVG Edit 时重复设置。如果出于隐私因素，你不希望将信息保存在你的电脑上，你可以更改以下默认选项。",
|
||
"By default, the algorithm tends to like dark images too much, if you think the output is too dark or not dark enough, you can adjust this ratio. 1 = ‘Do not darken at all’, 0 = ‘A totally black image is ok’, default = 0.9.": "默认情况下，算法倾向于生成较黑的图像，如果你认为输出的图像太黑或不够黑，你可以调整最小照明比率。1=\"完全不变暗\"，0=\"全黑的图像\"，默认=0.9",
|
||
"By none": "不分组",
|
||
"By tokens": "词元分组",
|
||
"By vectors": "向量分组",
|
||
"By words": "单词分组",
|
||
"Cache gradio themes locally": "缓存 Gradio 主题到本地",
|
||
"Cache Latents": "缓存潜变量",
|
||
"Cache LDSR model in memory": "将 LDSR 模型缓存在内存中",
|
||
"Cadence": "生成间隔",
|
||
"Cafe Aesthetic": "Cafe 美学",
|
||
"calculate dimension of LoRAs(It may take a few minutes if there are many LoRAs)": "计算 LoRA 维度 (取决于模型数量，可能需要数分钟)",
|
||
"Calculate hash": "计算哈希值",
|
||
"Calculate Split Loss": "分割计算损失 (Loss) 值",
|
||
"- Camera": "- 镜头",
|
||
"Camera Far": "镜头最远渲染距离",
|
||
"Camera Focal Length": "镜头焦距",
|
||
"Camera Near": "镜头最近渲染距离",
|
||
"Camera Parameters": "镜头参数",
|
||
"Can be empty, indicating no translation": "可以为空，表示无需翻译",
|
||
"Can be empty,indicating no translation": "可以为空，表示无需翻译",
|
||
"Cancel": "取消",
|
||
"Cancel generate forever": "停止无限生成",
|
||
"Cancel training.": "取消训练",
|
||
"canny": "canny (硬边缘检测)",
|
||
"Canny": "Canny (硬边缘)",
|
||
"Canvas Height": "画布高度",
|
||
"Canvas Hotkeys": "画布热键",
|
||
"- Canvas Size": "- 画布尺寸",
|
||
"Canvas Width": "画布宽度",
|
||
"Caption Backup File": "描述备份文件",
|
||
"Caption File Ext": "文件扩展名",
|
||
"Caption of Selected Image": "被选图片的描述",
|
||
"Caption: Returns a string describing the image": "描述文本: 返回的用于描述图像的字符串",
|
||
"Captions": "描述文本",
|
||
"Caption Text File": "描述文本文件",
|
||
"Caption type": "描述文本类型",
|
||
"Card height for Extra Networks": "扩展模型卡片高度",
|
||
"Card height for Extra Networks (px)": "扩展模型卡牌高度 (px)",
|
||
"cards": "卡牌视图",
|
||
"Card text scale": "卡片文本大小",
|
||
"Card width for Extra Networks": "扩展模型卡片宽度",
|
||
"Card width for Extra Networks (px)": "扩展模型卡牌宽度 (px)",
|
||
"cartoon": "cartoon (卡通)",
|
||
"Cartoon": "卡通",
|
||
"cascadePSP": "CascadePSP",
|
||
"case sensitive": "区分大小写",
|
||
"Categorical mask status": "分类蒙版状态",
|
||
"Categorys of prompt": "提示词分类",
|
||
"Catppuccin Flavor": "Catppuccin 主题样式（背景颜色）",
|
||
"⚠ Caution: You should only use these options if you know what you are doing. ⚠": "⚠ 警告: 你需要清楚知道自己在做什么才能使用这些选项. ⚠",
|
||
"centered": "居中",
|
||
"(CF10) Checkpoint format": "(CF10) 模型格式",
|
||
"(CF1) Checkpoint format": "(CF1) 模型格式",
|
||
"(CF2) Checkpoint format": "(CF2) 模型格式",
|
||
"(CF3) Checkpoint format": "(CF3) 模型格式",
|
||
"(CF4) Checkpoint format": "(CF4) 模型格式",
|
||
"(CF5) Checkpoint format": "(CF5) 模型格式",
|
||
"(CF6) Checkpoint format": "(CF6) 模型格式",
|
||
"(CF7) Checkpoint format": "(CF7) 模型格式",
|
||
"(CF8) Checkpoint format": "(CF8) 模型格式",
|
||
"(CF9) Checkpoint format": "(CF9) 模型格式",
|
||
"cfg_scale": "提示词引导系数 (CFG)",
|
||
"CFG scale": "提示词引导系数 (CFG Scale)",
|
||
"CFG Scale": "提示词引导系数 (CFG Scale)",
|
||
"CFG scale schedule": "CFG 系数调度计划",
|
||
"changeable blocks : BASE,IN00,IN01,IN02,IN03,IN04,IN05,IN06,IN07,IN08,IN09,IN10,IN11,M00,OUT00,OUT01,OUT02,OUT03,OUT04,OUT05,OUT06,OUT07,OUT08,OUT09,OUT10,OUT11": "可更改区块: \nBASE,IN00,IN01,IN02,IN03,IN04,IN05,IN06,IN07,IN08,IN09,IN10,IN11,M00,OUT00,OUT01,OUT02,OUT03,OUT04,OUT05,OUT06,OUT07,OUT08,OUT09,OUT10,OUT11",
|
||
"Change brightness": "调节亮度",
|
||
"Change checkpoint": "更改模型",
|
||
"Change contrast": "调节对比度",
|
||
"Change CTRL keybindings to SHIFT": "将 CTRL 绑定更改为 SHIFT",
|
||
"Change gain": "调节增强强度",
|
||
"Change gamma": "调节伽马",
|
||
"Changes are not applied to the text files until the \"Save all changes\" button is pressed.": "更改不会被应用至文本文件，直到 “保存所有更改” 按钮被按下",
|
||
"Change saturation": "调节饱和度",
|
||
"(changes seeds drastically; use CPU to produce the same picture across different videocard vendors)": "(显著改变种子效果; 使用 CPU 选项可使不同型号显卡产生相同图像)",
|
||
"(changes seeds drastically; use CPU to produce the same picture across different videocard vendors; use NV to produce same picture as on NVidia videocards)": "(大幅改变种子效果, 使用 CPU 选项使不同型号显卡产生相同图像; 使用 NV 选项来产生与 NVIDIA 显卡相同的图像)",
|
||
"(changes seeds drastically; use CPU to produce the same picture across different vidocard vendors)": "(大幅改变种子效果, 使用 CPU 选项使不同型号显卡产生相同图像)",
|
||
"Change your brush width to make it thinner if you want to draw something.": "绘制内容前请先调整画笔粗细。",
|
||
"Chant filename": "Chant 文件名",
|
||
"Chant filename (Chants are longer prompt presets)": "Chant 文件名（Chant 指较长的提示词预设）",
|
||
"(Chants are longer prompt presets)": "(Chants 是较长的提示词预设)",
|
||
"character": "character (角色)",
|
||
"Chat": "聊天",
|
||
"ChatGPT Model Name": "ChatGPT 模型名称",
|
||
"Cheap neural network approximation. Very fast compared to VAE, but produces pictures with 4 times smaller horizontal/vertical resolution and lower quality.": "廉价的神经网络近似值。与VAE相比速度非常快，但生成的图片水平/垂直分辨率是VAE的四分之一，质量较低",
|
||
"Checkbox": "勾选框",
|
||
"Check Console log for Downloading Status": "检查控制台日志以查看下载信息",
|
||
"Check for updates": "检查更新",
|
||
"Check models' new version": "检查模型版本更新",
|
||
"Check models’ new version": "检索模型的新版本",
|
||
"Check New Version from Civitai": "从 Civitai 上检查版本更新",
|
||
"checkpoint": "模型",
|
||
"Checkpoint": "模型",
|
||
"Checkpoint A": "大模型 A",
|
||
"Checkpoint B": "大模型 B",
|
||
"Checkpoint Dropdown": "大模型下拉列表",
|
||
"Checkpoint format": "模型格式",
|
||
"Checkpoint Format": "模型格式",
|
||
"Checkpoint Merger": "模型融合",
|
||
"Checkpoint name": "模型名",
|
||
"Checkpoints": "模型",
|
||
"Checkpoint schedule": "模型表",
|
||
"Checkpoints to cache in RAM": "保留在内存中的 Stable Diffusion 模型数量",
|
||
"Check progress": "查看进度",
|
||
"Check system info for validity": "检测系统信息的有效性",
|
||
"Check tensors": "检测 tensors",
|
||
"check this box to enable guided images mode": "选中该项启用图像引导模式",
|
||
"Check this if you want to generate random prompts, even if your seed is fixed": "勾选此选项可在随机种子固定的情况下依然生成随机提示词",
|
||
"* check your CLI for outputs": "* 检查 CLI 的输出",
|
||
"* check your CLI for outputs *": "* 检查 CLI 的输出 *",
|
||
"Chess": "分块",
|
||
"children's illustration": "children's illustration (儿童画作)",
|
||
"choose an algorithm/ method for keeping color coherence across the animation": "选择一种算法/方法来保持整个动画的颜色一致性",
|
||
"Choose a number of terms from a list, in this case we choose two artists:": "从列表中选几项，在此示例中选择了两个艺术家",
|
||
"Choose latent sampling method": "选择潜变量采样方法",
|
||
"Choose Min-max to activate these controls": "在评分过滤器选择 “最低-最高” 以激活控件",
|
||
"Choose mode:": "选择模式：",
|
||
"Choose preprocessor for semantic segmentation:": "选择语义分割的预处理器：",
|
||
"choose the frame interpolation engine and version": "选择帧插值引擎类型和版本",
|
||
"(choose Unet model: Automatic = use one with same filename as checkpoint; None = use Unet from checkpoint)": "(选择 Unet 模型: 自动 = 使用与大模型文件名相同的文件; 无 = 使用大模型中的 Unet)",
|
||
"(choose VAE model: Automatic = use one with same filename as checkpoint; None = use VAE from checkpoint)": "(选择 VAE 模型: 自动 = 选择与 Stable Diffusion 模型文件名相同的 VAE 模型; 无 = 使用所选择的 Stable Diffusion 模型的内置 VAE)",
|
||
"Choose which animation params are to be saved to the .srt file (Frame # and Seed will always be saved):": "选择要保存到 .srt 文件中的动画参数 (Frame # 和 Seed 将始终保存):",
|
||
"Choose your favorite mask:": "请选择你喜欢的蒙版：",
|
||
"chromatic": "色度",
|
||
"Chromatic": "色度",
|
||
"circle": "圆形",
|
||
"City": "城市",
|
||
"cityscape": "cityscape (城市景观)",
|
||
"Civitai Helper": "Civitai 助手",
|
||
"Civitai URL": "Civitai 链接",
|
||
"Civitai URL or Model ID": "Civitai 地址或模型 ID",
|
||
"ckpt": "ckpt",
|
||
"Class": "组件类别",
|
||
"Class Generation Schedulers": "类别生成调度器",
|
||
"classic": "经典",
|
||
"Classification CFG Scale": "分类提示词引导系数(Classification CFG scale)",
|
||
"Classification Dataset Directory": "分类 (Classification) 数据集目录",
|
||
"Classification Image Negative Prompt": "分类(classification)图像反向提示词",
|
||
"Classification Steps": "分类(Classification)步数",
|
||
"Classifier Free Guidance Scale - how strongly the image should conform to prompt - lower values produce more creative results": "无分类器引导系数(Classifier Free Guidance Scale) - 图像应在多大程度上服从提示词 - 较低的值会产生更有创意的结果",
|
||
"Classify type": "分类类型",
|
||
"Class Image Generation": "类别图像生成",
|
||
"Class Images Per Instance Image": "每个实例图像的类别图像数",
|
||
"Class prompt": "类别(Class)正向提示词",
|
||
"Class Prompt": "类别(Class)正向提示词",
|
||
"Class Token": "词元类别",
|
||
"clean": "clean (绿色、清洁)",
|
||
"Cleanup non-default temporary directory when starting webui": "启动 WebUI 时清理非默认临时目录",
|
||
"Clear": "清除",
|
||
"Clear all": "清空全部",
|
||
"Clear ALL filters": "清除所有过滤器",
|
||
"Clear prompt": "清空提示词内容",
|
||
"Clear selection": "清空选择",
|
||
"Clear tag filters": "标签清除过滤器",
|
||
"Clear values": "清空数值",
|
||
"Click Enhance.": "点击“增强”按钮",
|
||
"Click Here": "点击这里",
|
||
"Click here after the generation to show the video": "生成完成后点这里显示视频",
|
||
"click here to gather relevant info": "点击此处以收集相关信息",
|
||
"Click on the files that appear in the tree to edit them.": "选择下方列表中的文件来进行编辑",
|
||
"Click to Upload": "点击上传",
|
||
"Clip and renormalize": "衰减与规格化",
|
||
"🕵️♂️ CLIP Interrogator 🕵️♂️": "🕵️♂️ CLIP 反推 🕵️♂️",
|
||
"CLIP Interrogator on Github": "GitHub上的 CLIP Interrogator (CLIP 反推扩展)",
|
||
"CLIP Maximum length": "CLIP 反推最大长度",
|
||
"CLIP: maximum number of lines in text file": "CLIP: 文本文件的最大行数",
|
||
"CLIP Minimum length": "CLIP 反推最小长度",
|
||
"CLiP model": "CLiP 模型",
|
||
"CLIP Model": "CLIP 模型",
|
||
"CLIP models:": "CLIP 模型:",
|
||
"clipseg": "CLIP 分割",
|
||
"clipseg options": "CLIPSeg 选项",
|
||
"Clip skip": "CLIP 终止层数",
|
||
"Clip skip:": "CLIP 终止层数:",
|
||
"Clip Skip": "CLIP 终止层数",
|
||
"CLIP Skip": "CLIP 终止层数",
|
||
"Clip skip (2 if training anime model)": "CLIP 终止层数 (训练二次元模型时调至 2)",
|
||
"CLIP: skip inquire categories": "CLIP: 跳过查询类别",
|
||
"CLIP skip schedule": "CLIP 终止层数调度计划",
|
||
"CLIP tensors checker": "Clip tensors 检测",
|
||
"clip_threshold": "裁剪阈值",
|
||
"Close": "关闭",
|
||
"Closed": "关闭",
|
||
"Close Preview": "关闭预览",
|
||
"Closer is brighter": "越近越亮",
|
||
"Close the video": "关闭视频",
|
||
"cloudscape": "cloudscape (云景)",
|
||
"cluster num": "簇数",
|
||
"Codec": "编码器",
|
||
"CodeFormers (Face restoration)": "CodeFormers (面部修复)",
|
||
"CodeFormer vis.": "CodeFormer 可见程度",
|
||
"CodeFormer visibility": "CodeFormer 可见程度",
|
||
"CodeFormer weight": "CodeFormer 权重",
|
||
"CodeFormer Weight": "CodeFormer 权重",
|
||
"CodeFormer weight (0 = maximum effect, 1 = minimum effect)": "CodeFormer 权重 (0 = 效果最强，1 = 效果最弱)",
|
||
"CodeFormer weight parameter; 0 = maximum effect; 1 = minimum effect": "CodeFormer 权重参数；为 0 时效果最大；为 1 时效果最小",
|
||
"Coherence": "一致性",
|
||
"🦒 Colab Run Command": "🦒 Colab 运行命令",
|
||
"collage": "collage (拼贴)",
|
||
"Collection actions": "合集操作",
|
||
"Color": "颜色",
|
||
"color_burn": "颜色加深",
|
||
"color_coherence": "颜色一致性",
|
||
"Color coherence": "颜色一致性",
|
||
"Color coherence may be used with hybrid composite off, to just use video color.": "颜色一致性可以在混合合成关闭的情况下使用, 针对视频色彩",
|
||
"color_coherence_video_every_N_frames": "每 N 帧校正视频颜色",
|
||
"Color correction factor": "颜色校正系数",
|
||
"color_dodge": "颜色减淡",
|
||
"Color Fix": "颜色修正",
|
||
"Color force Grayscale": "强制颜色空间为灰度",
|
||
"colorful": "colorful (多彩)",
|
||
"[color-matcher]": "颜色匹配器",
|
||
"Color Matcher Ref Image": "颜色匹配器参考图",
|
||
"Color Matcher Ref Image Type": "颜色匹配器参考图类型",
|
||
"color mode": "颜色模式",
|
||
"Color reduce algo": "色彩减弱算法",
|
||
"colors": "色块",
|
||
"Color sketch inpainting": "彩色涂鸦重绘",
|
||
"Color Transfer Method": "颜色迁移算法",
|
||
"Color variation": "色彩变种",
|
||
"Combinations": "组合",
|
||
"Combinatorial batches": "组合批次数",
|
||
"Combinatorial generation": "组合生成",
|
||
"Combine axis": "拼合方向",
|
||
"Combined": "兼有",
|
||
"Combine input and depthmap into one image": "原图和深度图拼合为一张",
|
||
"Combine interrogations": "合并反推",
|
||
"Combine into one image": "拼合为一张图像",
|
||
"ComfyUI install location": "ComfyUI 安装路径",
|
||
"ComfyUI server graceful termination timeout (in seconds) when reloading the gradio UI (-1 to block until the ComfyUI server exits normally)": "UI 重载时 ComfyUI 服务器最长平稳退出时间限制 (秒) (-1 代表持续等待 ComfyUI 服务器正常退出)",
|
||
"comics": "comics (美漫)",
|
||
"comma": "逗号",
|
||
"Comma separated face number(s)": "逗号分隔的面部编号",
|
||
"Comma-separated list of tab names; tabs listed here will appear in the extra networks UI first and in order lsited.": "以逗号分割的选项卡名称列表；这里列出的选项卡将首先按顺序出现在扩展模型面板中",
|
||
"Comma-separated list of tags (\"artist, style, character, 2d, 3d...\")": "以逗号分割的标签列表 (如 \"artist,style,character,2d,3d...\")",
|
||
"Commit": "提交",
|
||
"Common Tags": "原标签 (Common Tags)",
|
||
"Comp alpha schedule": "透明度组合调度计划",
|
||
"Compatibility": "兼容性",
|
||
"Complete documentation is available at https://github.com/adieyal/sd-dynamic-prompts. Please report any issues on GitHub.": "完整文档已在以下地址发布: https://github.com/adieyal/sd-dynamic-prompts 如有任何问题请在 GitHub 反馈",
|
||
"Comp mask auto contrast": "自动对比度合成蒙版",
|
||
"Comp mask auto contrast cutoff high schedule": "合成蒙版自动对比度隔离高值调度计划",
|
||
"Comp mask auto contrast cutoff low schedule": "合成蒙版自动对比度隔离低值调度计划",
|
||
"Comp mask blend alpha schedule": "合成蒙版透明度混合调度计划",
|
||
"Comp mask contrast schedule": "合成蒙版对比度调度计划",
|
||
"Comp mask equalize": "合成蒙版量化",
|
||
"Comp mask inverse": "合成蒙版反转",
|
||
"Comp mask type": "合成蒙版类型",
|
||
"Component": "模型组件",
|
||
"Composable Mask scheduling": "蒙版组合调度计划",
|
||
"Composite audio files extracted from the original video onto the concatenated video.": "将原始视频中的音频整合到生成的视频中。",
|
||
"Composite video with previous frame init image in": "前一帧初始图像的合成视频在",
|
||
"Comp save extra frames": "保存合成过程所有额外帧",
|
||
"Compute Settings": "计算设置",
|
||
"Concatenate each frame while crossfading.": "在交叉融合运算时串联每一帧。",
|
||
"Concavity of distortion of circles": "圆形变形的凹凸程度",
|
||
"concept": "concept (概念)",
|
||
"Concept 1": "概念 1",
|
||
"Concept 2": "概念 2",
|
||
"Concept 3": "概念 3",
|
||
"Concept 4": "概念 4",
|
||
"concept art": "concept art (概念艺术)",
|
||
"concept - Can be a concept, such as “a X of Y”, or an historical event such as “The Trojan War”.": "concept - 概念 - 可以是一种概念：例如一个事物的某种特质；或者是一个历史事件，例如 “特洛伊战争“ 。",
|
||
"Concepts": "概念",
|
||
"Concepts List": "概念列表",
|
||
"Config Backup: Config": "配置备份：配置",
|
||
"Config file for Adapter models": "Adapter 模型配置文件路径",
|
||
"Config file for Control Net models": "ControlNet 模型配置文件路径",
|
||
"Config Name": "配置名",
|
||
"Config Presets": "预设配置",
|
||
"Config-Presets": "预设配置",
|
||
"configuration": "插件设置",
|
||
"configuration for": "详细设置",
|
||
"Configure colors. See the Settings section in the README for more info. Must be valid JSON.": "配置颜色。更多信息请查看 README 中的 \"Settings (设置)\" 部分。需要有效的 JSON。",
|
||
"Configure Hotkeys. For possible values, see https://www.w3.org/TR/uievents-key, or leave empty / set to 'None' to disable. Must be valid JSON.": "配置热键。对于可能的取值，请查看该链接: https://www.w3.org/TR/uievents-key ，留空或设置为 '无' 来禁用。需要有效的 JSON。",
|
||
"Connect": "连接",
|
||
"Connecting": "连接中",
|
||
"Connection errored out.": "连接出错",
|
||
"Consider a donation on ko-fi! :3": "考虑在 ko-fi 上为本插件赞助! :3",
|
||
"Consistency mask blur": "一致性蒙版模糊",
|
||
"Console logging": "控制台日志记录",
|
||
"Console log tag counts per file, no progress bar": "逐文件在控制台输出标签计数日志 (无进度条)",
|
||
"Containing directory": "目标模型目录",
|
||
"contrast": "对比度",
|
||
"Contrast": "对比度",
|
||
"Contrast:": "对比度",
|
||
"Contrast schedule": "对比度调度计划",
|
||
"control animation mode, will hide non relevant params upon change": "动画控制模式，会在修改模式后自动隐藏不相关参数",
|
||
"Control Mode": "控制模式",
|
||
"Control Mode (Guess Mode)": "控制类型 (猜测模式)",
|
||
"controlnet: A neural network structure to control diffusion models by adding extra conditions. Check manual for setup info.": "ControlNet: 一种通过添加额外条件来控制扩散模型的神经网络结构。请查看手册了解如何设置。",
|
||
"ControlNet Fastload": "ControlNet 快速配置",
|
||
"ControlNet Fastload Plugin First": "ControlNet Fastload 扩展优先",
|
||
"ControlNet guidance end": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 10th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 2nd": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 3rd": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 4th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 5th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 6th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 7th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 8th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance end 9th": "ControlNet 引导结束时机",
|
||
"ControlNet guidance start": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 10th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 2nd": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 3rd": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 4th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 5th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 6th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 7th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 8th": "ControlNet 引导介入时机",
|
||
"ControlNet guidance start 9th": "ControlNet 引导介入时机",
|
||
"ControlNet Inpaint Index": "ControlNet 重绘 Unit 序号",
|
||
"ControlNet inpainting Gaussian blur sigma": "ControlNet 重绘高斯模糊 Sigma",
|
||
"ControlNet inpaint model index": "ControlNet 的 inpaint 模型启用单元页",
|
||
"ControlNet inpaint not masked": "ControlNet 重绘不使用蒙版",
|
||
"ControlNet Inpaint Number": "ControlNet 重绘序号",
|
||
"Controlnet input directory": "ControlNet 输入目录",
|
||
"ControlNet input directory": "ControlNet 的输入目录",
|
||
"ControlNet Input Video/ Image Path": "ControlNet 输入 视频/图像 的路径",
|
||
"ControlNet Input Video Path": "ControlNet 输入视频路径",
|
||
"ControlNet is more important": "更偏向 ControlNet",
|
||
"ControlNet Mask Video/ Image Path (*NOT WORKING, kept in UI for CN's devs testing!*)": "ControlNet 蒙版 视频/图像 的路径 (*暂时不可用, 保留在 UI 中方便 ControlNet 的开发测试*)",
|
||
"ControlNet Mask Video Path": "ControlNet 视频蒙版路径",
|
||
"ControlNet model": "ControlNet 模型",
|
||
"ControlNet model 10th": "ControlNet 模型",
|
||
"ControlNet model 2nd": "ControlNet 模型",
|
||
"ControlNet model 3rd": "ControlNet 模型",
|
||
"ControlNet model 4th": "ControlNet 模型",
|
||
"ControlNet model 5th": "ControlNet 模型",
|
||
"ControlNet model 6th": "ControlNet 模型",
|
||
"ControlNet model 7th": "ControlNet 模型",
|
||
"ControlNet model 8th": "ControlNet 模型",
|
||
"ControlNet model 9th": "ControlNet 模型",
|
||
"ControlNet Model ID": "ControlNet 模型",
|
||
"ControlNet model index": "ControlNet 模型编号",
|
||
"ControlNet number": "ControlNet 单元序号",
|
||
"ControlNet option": "ControlNet 选项",
|
||
"ControlNet options": "ControlNet 选项",
|
||
"ControlNet Plugin First": "ControlNet 扩展优先",
|
||
"[ControlNet] Preprocessor": "[ControlNet] 预处理器",
|
||
"ControlNet Preprocessor": "ControlNet 预处理器",
|
||
"[ControlNet] Pre Resolution": "[ControlNet] 预处理器 分辨率",
|
||
"[ControlNet] Pre Threshold A": "[ControlNet] 预处理器 阈值A",
|
||
"[ControlNet] Pre Threshold B": "[ControlNet] 预处理器 阈值B",
|
||
"[ControlNet] Resize Mode": "[ControlNet] 缩放模式",
|
||
"ControlNet Segmentation Index": "ControlNet 语义分割 Unit 序号",
|
||
"Controlnet tile model name": "Controlnet tile 模型名",
|
||
"ControlNet Video Input": "ControlNet 视频输入",
|
||
"ControlNet Video Mask Input": "ControlNet 视频蒙版输入",
|
||
"ControlNet weight": "ControlNet 权重",
|
||
"[ControlNet] Weight": "[ControlNet] 权重",
|
||
"Control Net Weight": "ControlNet 权重",
|
||
"ControlNet weight 10th": "ControlNet 权重",
|
||
"ControlNet weight 2nd": "ControlNet 权重",
|
||
"ControlNet weight 3rd": "ControlNet 权重",
|
||
"ControlNet weight 4th": "ControlNet 权重",
|
||
"ControlNet weight 5th": "ControlNet 权重",
|
||
"ControlNet weight 6th": "ControlNet 权重",
|
||
"ControlNet weight 7th": "ControlNet 权重",
|
||
"ControlNet weight 8th": "ControlNet 权重",
|
||
"ControlNet weight 9th": "ControlNet 权重",
|
||
"Control Net Weight For Face": "ControlNet 脸部权重",
|
||
"controls for how many frames the same seed should stick before iterating to the next one": "控制在迭代到下一个新种子之前该种子应使用多少帧",
|
||
"controls pixel generation method for images smaller than the frame. hover on the options to see more info": "控制小于设定画布的图像的像素生成模式。鼠标指针悬停在选项上以查看更多信息",
|
||
"Controls the contrast of the composite mask. 0.5 if half, 1 is normal contrast, 2 is double, etc.": "控制合成蒙版的对比度。0.5为一半对比度，1为正常对比度，2为双倍对比度，以此类推。",
|
||
"controls the handling of pixels outside the field of view as they come into the scene": "选择视场外像素进入场景时的处理方式",
|
||
"Controls the maximum length in tokens of the generated prompt.": "按词元数控制提示词生成的最大长度",
|
||
"controls the seed behavior that is used for animation. hover on the options to see more info": "控制用于制作动画的随机数种子行为。悬浮鼠标指针在不同选项上查看更多信息。",
|
||
"Controls the strength of the diffusion on the init image. 0 = disabled": "控制初始化图像生成器的强度。 0 = 禁用",
|
||
"controls which sampler to use at a specific scheduled frame": "控制在特定调度计划的帧使用什么采样方法",
|
||
"Control Type": "控制类型",
|
||
"Control Weight": "控制权重",
|
||
"convert": "转换",
|
||
"Convert a 360 spherical panorama to a 3D mesh": "将单张 360° 球形全景图转换为 3D 网格",
|
||
"Convert a single 2D image to a 3D mesh": "将单张 3D 图像转换为 3D 网格",
|
||
"Convert currently loaded checkpoint into ONNX. The conversion will fail catastrophically if TensorRT was used at any point prior to conversion, so you might have to restart webui before doing the conversion.": "将当前加载的 checkpoint 转换为 ONNX 模型。如果在转换前的任意时间加载了 TensorRT, 转换会失败。推荐在转换前重启 webui",
|
||
"Converted checkpoints will be saved in your": "转换出的模型将会保存在你的",
|
||
"Convert Folder": "转换该目录",
|
||
"Convert ONNX to TensorRT": "将 ONNX 模型转换为 TensorRT 模型",
|
||
"Convert to ONNX": "转换为 ONNX 模型",
|
||
"Convert Unet to ONNX": "转换 Unet 为 ONNX 模型",
|
||
"copy": "复制",
|
||
"Copy": "复制",
|
||
"Copy and Overwrite": "复制与覆写",
|
||
"Copy caption from selected images automatically": "自动从被选图片中复制描述",
|
||
"Copy collection": "复制集合",
|
||
"Copy config from": "复制配置文件",
|
||
"Copy image to:": "复制当前图像到: ",
|
||
"Copy Metadata": "开始复制元数据",
|
||
"Copy metadata from merged models": "从融合模型中复制元数据",
|
||
"Copy metadata to other models in directory": "将元数据复制到文件夹中的其他模型",
|
||
"Copy or move captions together": "复制或一起移动描述文本文件",
|
||
"copy to clipboard": "复制",
|
||
"📋 Copy to clipboard": "📋 复制到剪切板",
|
||
"Copy to ControlNet Inpainting": "复制到 ControlNet 重绘",
|
||
"Copy to ControlNet Segmentation": "复制到 ControlNet 语义分割",
|
||
"Copy to favorites": "复制到收藏夹",
|
||
"Copy to Inpaint Upload & ControlNet Inpainting": "复制到局部重绘和 ControlNet 重绘",
|
||
"Copy to txt2img ControlNet Inpainting": "复制到文生图 ControlNet 重绘中",
|
||
"cosine": "余弦",
|
||
"cosine_with_restarts": "周期重启余弦",
|
||
"Country": "国家",
|
||
"Cover image": "封面图像",
|
||
"Cozy Image Browser": "Cozy 图库浏览器",
|
||
"Cozy Nest Image Browser": "Cozy Nest 图库浏览器",
|
||
"Create": "创建",
|
||
"create a gif in addition to .mp4 file. supports up to 30 fps, will self-disable at higher fps values": "除 MP4 文件外额外创建 GIF 文件。最高支持30帧，在更高的帧数设置下会自动禁用本选项",
|
||
"Create a new model.": "创建一个新的模型",
|
||
"Create animation": "创建动画",
|
||
"Create a text file next to every image with generation parameters.": "同时为每个图片创建一个文本文件储存生成参数",
|
||
"Create blank canvas": "创建空白画布",
|
||
"Create classification images using training settings without training.": "不开启训练的情况下使用训练的参数设置创建类别图像。",
|
||
"Created at:": "创建时间：",
|
||
"Create debug image": "创建调试(debug)图像",
|
||
"Create embedding": "创建嵌入式模型",
|
||
"Create flipped copies": "创建水平翻转副本",
|
||
"Create From Hub": "从 Huggingface Hub 中创建",
|
||
"Create hypernetwork": "创建超网络 (Hypernetwork)",
|
||
"Create mask area": "创建蒙版区域",
|
||
"Create Model": "创建模型",
|
||
"<create new>": "<新建>",
|
||
"Create New Canvas": "创建新画布",
|
||
"Create Project": "创建项目",
|
||
"Creates animation sequence from denoised intermediate steps with video frame interpolation to achieve desired animation duration": "利用视频插值从降噪过程的中间步骤图像中生成动画",
|
||
"create time": "按创建时间",
|
||
"Create txt2img canvas": "创建文生图画布",
|
||
"Create Version": "创建版本",
|
||
"Create your wildcard library by copying a collection using the dropdown below.": "通过使用下面的下拉列表复制一个集合来创建你的通配符库",
|
||
"Create your wildcard library by copying a collection using the dropdown in the Collection actions.": "通过 \"合集操作\" 中下拉菜单中的复制合集选项，创建通配符库",
|
||
"CRF": "固定码率因子 (CRF)",
|
||
"crop": "裁剪",
|
||
"Crop and resize": "裁剪后缩放",
|
||
"Crop and Resize": "裁剪后缩放",
|
||
"Crop Images": "剪裁图像",
|
||
"crop left coordinate": "左侧裁剪坐标",
|
||
"crop_n_layers": "分层层数",
|
||
"crop_nms_thresh": "分层数量阈值",
|
||
"crop_n_points_downscale_factor": "分层采样点坍缩因子",
|
||
"crop_overlap_ratio": "分层重叠度",
|
||
"Cropping": "剪裁",
|
||
"Crop to fit": "裁剪以适应宽高比",
|
||
"crop top coordinate": "顶部裁剪坐标",
|
||
"Crop: top, left, bottom, right": "裁切：顶部，左侧，顶部，右侧",
|
||
"Cross-attention": "Cross-Attention 优化方案",
|
||
"Cross attention optimization": "Cross-Attention 优化方案",
|
||
"Crossfade blend rate": "交叉融合强度",
|
||
"csv file with columns for filenames and prompts": "列有文件名和提示词的 csv 文件",
|
||
"Ctrl+up/down precision when editing (attention:1.1)": "使用 Ctrl + ↑/↓ 设置 \"(tag:1.1)\" 时的精度",
|
||
"Ctrl+up/down precision when editing <extra networks:0.9>": "使用 Ctrl + ↑/↓ 设置 \"<extra networks:0.9>\" 时的精度",
|
||
"Ctrl+up/down word delimiters": "可以使用 Ctrl + ↑/↓ 设置权重的\"提示词分隔符类型\"",
|
||
"cubism": "cubism (立体主义)",
|
||
"Current": "Current (当前/当前帧)",
|
||
"Current batch": "当前批次",
|
||
"Current Cache": "当前缓存目录",
|
||
"Current Dataset to be trained": "当前训练所用数据集",
|
||
"currently selected model": "当前选择的模型",
|
||
"Current Model": "当前模型",
|
||
"Current ranking": "当前评分",
|
||
"Current version": "当前版本",
|
||
"Custom Config File": "自定义配置文件",
|
||
"Custom EXIF": "自定义 EXIF 文本",
|
||
"Custom Model Name": "自定义模型名称",
|
||
"Custom Name (Optional)": "自定义名称 (可选)",
|
||
"Custom parameters": "自定义参数",
|
||
"Custom settings file": "自定义设置文件",
|
||
"Custom size": "自定义尺寸",
|
||
"custum name": "自定义名称",
|
||
"Cutoff strongly.": "强效分隔",
|
||
"Cut video in to segments": "视频剪辑成片段",
|
||
"Cut white margin from input": "从输入中剪切空白区域",
|
||
"Cyan | Red": "青色 | 红色",
|
||
"Cycle BG": "轮转背景图",
|
||
"Daam script": "Daam 脚本",
|
||
"dark": "dark (暗黑)",
|
||
"darken": "变暗",
|
||
"Dataset": "数据集",
|
||
"Dataset directory": "数据集目录",
|
||
"Dataset Directory": "数据集目录",
|
||
"Dataset folder structure": "数据集文件夹结构",
|
||
"Dataset Images": "数据集图片",
|
||
"Dataset Load Settings": "数据集加载设置",
|
||
"Dataset size:": "数据集大小",
|
||
"date": "日期",
|
||
"Date": "日期",
|
||
"Date Created": "创建日期",
|
||
"Date Modified": "修改日期",
|
||
"Date trained:": "训练日期:",
|
||
"debug": "调试",
|
||
"Debug": "调试",
|
||
"Debug Buckets": "调试工具包 (Debug Buckets)",
|
||
"Debug info": "调试信息",
|
||
"Debug level": "调试等级",
|
||
"Debug log": "调试日志",
|
||
"Decode CFG scale": "解码提示词引导系数(CFG scale)",
|
||
"Decoder Tile Size": "解码器分块大小",
|
||
"Decode steps": "解码迭代步数",
|
||
"Dedicated negative prompt": "专门的负面提示词",
|
||
"deepbooru: escape (\\) brackets": "deepbooru: 转义 (\\) 括号",
|
||
"deepbooru: filter out those tags": "deepbooru: 过滤以下标签",
|
||
"deepbooru: score threshold": "deepbooru: 评分阈值",
|
||
"deepbooru: sort tags alphabetically": "deepbooru: 按字母顺序排序标签",
|
||
"deepbooru: use spaces in tags": "deepbooru: 在标签间使用空格",
|
||
"default": "默认",
|
||
"Default": "默认",
|
||
"(default brush color of img2img inpaint sketch)": "(图生图涂鸦重绘默认画笔颜色)",
|
||
"(default brush color of img2img sketch)": "(图生图涂鸦默认画笔颜色)",
|
||
"Default Image CFG": "默认图像引导系数 (CFG)",
|
||
"default LoRA multiplier": "默认 LoRA 强度倍率",
|
||
"Default magic prompt model": "默认魔法提示词模型",
|
||
"Default multiplier for extra networks": "默认扩展模型强度倍率",
|
||
"Defaults": "默认设置",
|
||
"Default scoring type": "默认评分类型",
|
||
"Default Sort": "默认排序",
|
||
"Default upscaler for image resize operations": "默认图像缩放算法",
|
||
"default variables: in \\{\\}, like \\{init_mask\\}, \\{video_mask\\}, \\{everywhere\\}": "默认变量：\\{\\}，比如 \\{init_mask\\}, \\{video_mask\\}, \\{everywhere\\}",
|
||
"Default view for Extra Networks": "默认扩展模型视图",
|
||
"defines the seed behavior that is used for animations": "定义用于制作动画的随机数种子行为",
|
||
"❌ Del": "❌ 删除",
|
||
"delete": "删除",
|
||
"❌Delete": "❌删除",
|
||
"Delete": "删除",
|
||
"Delete 0-entries from exif cache": "从 EXIF 缓存删除 0-entries",
|
||
"Delete All Inputframes": "删除全部输入帧",
|
||
"Delete all preview image": "删除所有预览图片",
|
||
"Delete all wildcards": "删除所有通配符",
|
||
"DELETE cannot be undone. The files will be deleted completely.": "删除操作无法撤销，文件会被完全删除。",
|
||
"DELETE File(s)": "删除文件",
|
||
"Delete Imgs": "删除图像",
|
||
"Delete intermediate": "删除临时文件",
|
||
"Delete intermediate frames after GIF generation": "生成 GIF 后删除临时帧图片",
|
||
"(Delete keyframe, or Add keyframe from ": "(删除或增加关键帧，关键帧文件夹： ",
|
||
"delete next": "删除后 N 张",
|
||
"delete or keep raw affected (interpolated/ upscaled depending on the UI section) png imgs": "删除或保留受影响的原始 (根据 UI 设置进行插值/放大) PNG 图像",
|
||
"Delete Selected Skeleton (D key)": "删除选中骨架 (D 键)",
|
||
"Delete Style": "删除样式",
|
||
"Denoise": "降噪",
|
||
"Denoise strength": "重绘幅度",
|
||
"Denoising": "重绘幅度",
|
||
"Denoising Diffusion Implicit Models - best at inpainting": "Denoising Diffusion Implicit models - (DDIM) - 最擅长局部重绘",
|
||
"Denoising strength": "重绘幅度",
|
||
"Denoising strength curve": "重绘幅度曲线",
|
||
"Denoising strength for face images": "脸部重绘幅度",
|
||
"Denoising strength for the entire image": "全图重绘幅度",
|
||
"Denoising strength (Inpaint)": "局部重绘幅度",
|
||
"Depth": "Depth (深度)",
|
||
"Depth Algorithm": "深度算法",
|
||
"depth_leres": "depth_leres (LeReS 深度图估算)",
|
||
"depth_leres++": "depth_leres++ (LeReS 深度图估算++)",
|
||
"Depth Map": "深度图",
|
||
"Depth Maps": "深度图",
|
||
"depth_midas": "depth_midas (MiDaS 深度图估算)",
|
||
"Depth (Midas/Adabins)": "深度模式 (Midas / Adabins)",
|
||
"Depth Output": "深度图输出",
|
||
"Depth Prediction": "深度估计预处理",
|
||
"Depth Prediction demo": "深度估计预处理 Demo",
|
||
"Depth Warping & FOV": "深度变形 & 视场角",
|
||
"depth_zoe": "depth_zoe (ZoE 深度图估算)",
|
||
"Descending": "降序",
|
||
"Description": "描述",
|
||
"description-based:": "基于描述：",
|
||
"deselect all": "取消全选",
|
||
"Deselect visible tags": "取消选择可见标签",
|
||
"Destination directory": "目标目录",
|
||
"Destination Directory": "目标文件夹",
|
||
"Dest Path": "目标路径",
|
||
"detailed": "detailed (细节)",
|
||
"Detailed": "详细设置",
|
||
"Detailed Save As": "详细保存为",
|
||
"Details": "详细设置",
|
||
"Detect from image": "从图像中提取",
|
||
"Detect from Image": "从图像中提取",
|
||
"Detection": "检测",
|
||
"Detection model confidence threshold": "检测模型置信阈值",
|
||
"Detection model confidence threshold %": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 10th": "检测模型置信阈值",
|
||
"Detection model confidence threshold % 2nd": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 2nd": "检测模型置信阈值",
|
||
"Detection model confidence threshold % 3rd": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 3rd": "检测模型置信阈值",
|
||
"Detection model confidence threshold % 4th": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 4th": "检测模型置信阈值",
|
||
"Detection model confidence threshold % 5th": "检测模型置信阈值 (单位: %)",
|
||
"Detection model confidence threshold 5th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 6th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 7th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 8th": "检测模型置信阈值",
|
||
"Detection model confidence threshold 9th": "检测模型置信阈值",
|
||
"Determines how little respect the algorithm should have for image's content. At 0, nothing will change, and at 1 you'll get an unrelated image. With values below 1.0, processing will take less steps than the Sampling Steps slider specifies.": "决定算法对图像内容的影响程度。设置 0 时，什么都不会改变，而在 1 时，你将获得不相关的图像。\n值低于 1.0 时，处理的迭代步数将少于“采样迭代步数”滑块指定的步数",
|
||
"deterministic": "可复现的",
|
||
"Deterministic": "确定性",
|
||
"Device Info": "设备信息",
|
||
"difference": "差值",
|
||
"Difference": "差分",
|
||
"Diffuse the first frame based on an image, similar to img2img.": "基于图像生成第一帧，类似于图生图",
|
||
"Diffusion Weights (training snapshots)": "Diffusion 权重 (训练快照)",
|
||
"digital": "digital (数字)",
|
||
"digital art": "digital art (数字艺术)",
|
||
"Dilation factor (B)": "扩张因子 (B)",
|
||
"Dimension lower bound": "最小维度",
|
||
"Dimension upper bound": "最大维度",
|
||
"Directly Draw Scribbles": "直接绘制线稿",
|
||
"Directories": "目录",
|
||
"directory.": "目录。",
|
||
"Directory for detected maps auto saving": "检测图 (detected maps) 保存路径",
|
||
"Directory for saving images using the Save button": "“保存” 按钮输出文件夹",
|
||
"Directory for saving init images when using img2img": "图生图初始图像的保存文件夹",
|
||
"Directory for temporary images; leave empty for default": "临时图像目录；默认为空",
|
||
"(directory is hidden if its name starts with \".\")": "(如果目录的名称以 \".\" 开头, 就会被隐藏)",
|
||
"(directory is hidden if its name starts with \".\".)": "(如果目录的名称以 \".\" 开头, 就会被隐藏)",
|
||
"Directory name pattern": "目录名称格式",
|
||
"Directory path": "目录路径",
|
||
"Disable": "禁用",
|
||
"Disable all extensions": "停用所有扩展",
|
||
"Disable at the last loopback time": "最后一次回送时禁用",
|
||
"Disable built-in Lora handler": "停用内置 Lora 处理器",
|
||
"Disable Class Matching": "禁用类别匹配",
|
||
"Disable control type selection": "禁用控制类型筛选",
|
||
"disable convert 'AND' to 'BREAK'": "不再将 \"AND \"转换为 \"BREAK\"",
|
||
"disabled": "禁用",
|
||
"Disabled": "已禁用",
|
||
"Disable de-duplication of wildcards before processing.": "处理前禁用通配符去重",
|
||
"Disable during hires pass": "在高分辨率修复过程中停用",
|
||
"Disable dynamic prompts by unchecking this box.": "取消勾选来禁用动态提示词",
|
||
"Disable feedback": "停止反馈",
|
||
"Disable for Negative prompt.": "为反向提示词禁用本插件效果",
|
||
"Disable function that you don't use": "禁用不想使用的功能",
|
||
"Disable image browser (Reload UI required)": "禁用 Cozy 图库浏览器 (需重启UI)",
|
||
"Disable image browser (requires reload UI)": "禁用 Cozy 图库浏览器 (需要重启)",
|
||
"Disable Logging": "禁用输出日志",
|
||
"Disable memmapping for loading .safetensors files.": "加载 .safetensors 文件时禁用内存映射",
|
||
"Disable openpose edit": "禁用 openpose 姿态编辑",
|
||
"Disable prompt token counters": "禁用提示词词元长度计数器",
|
||
"Disables logging (graphs), may cause minor performance improvements.": "禁用输出日志 (图表) ，也许能略微提升性能。",
|
||
"Disable sorting of wildcards before processing.": "处理前禁用通配符排序",
|
||
"(disable to update the selected Gradio theme)": "(禁用以更新选中的 Gradio 主题)",
|
||
"Disable waves and gradiant background": "禁用波纹和背景渐变效果",
|
||
"Disable waves and gradiant background animations": "禁用波纹和背景渐变动画",
|
||
"Discard": "丢弃",
|
||
"Discard: remove style text from prompt, keep styles dropdown as it is.": "丢弃: 从提示词中删除对应预设样式文本, 并保持预设样式下拉菜单不变",
|
||
"Discard weights with matching name": "删除键名匹配该正则表达式的权重",
|
||
"discord server": " Discord 服务器",
|
||
"Discussions": "讨论",
|
||
"👎 Dislike": "👎 不喜欢",
|
||
"Disliked images": "不喜欢的图片",
|
||
"👎 Dislikes": "👎 不喜欢的",
|
||
"display both english and target language": "同时显示英语和目标语言",
|
||
"Display information dialog on Cozy Nest error": "显示 Cozy Nest 的信息对话框",
|
||
"Display loop number (0 = infinite loop)": "显示循环数 (0 = 无限循环)",
|
||
"Display mode:": "显示模式：",
|
||
"Display Name": "显示名称",
|
||
"Display name for this model": "此模型的显示名",
|
||
"Disregard checkpoint information from pasted infotext": "忽略粘贴的生成信息文本中的 Stable Diffusion 模型信息",
|
||
"dithering": "抖动 (dithering)",
|
||
"Divergence (3D effect)": "发散性（3D 效果）",
|
||
"Divide mode": "分割模式",
|
||
"Divide Ratio": "分割比率",
|
||
"Divisions": "分区方式",
|
||
"Dolly": "希区柯克（推轨变焦）",
|
||
"Do not add watermark to images": "不在图像上添加水印",
|
||
"Do not append detectmap to output": "不输出检测图 (detected maps) (如深度估算图、动作检测图等)",
|
||
"Do not apply ControlNet during highres fix": "高分辨率修复过程中不应用 ControlNet",
|
||
"Do not do anything special": "什么都不做",
|
||
"Do not fix prompt schedule for second order samplers.": "不为二阶采样方法修复提示词作用时间",
|
||
"Do not make DPM++ SDE deterministic across different batch sizes.": "保留 DPM++ SDE 采样器 在不同的批次大小之间的结果差异",
|
||
"(Do not recalculate conds from prompts if prompts have not changed since previous calculation)": "(若提示词自上次计算后未发生变化, 则不根据提示词重新调整计算)",
|
||
"Do not resize images": "不调整图像大小",
|
||
"Do not save grids consisting of one picture": "当仅有一张图时不保存网格图",
|
||
"Do not save heatmap images": "不保存热力图图像",
|
||
"Do not show any images in results for web": "不在浏览器输出结果中显示任何图像",
|
||
"Do not store my preferences or SVG content locally": "不在本地保存设置和SVG图像",
|
||
"Do not upload here until bugfix": "在错误完全修复前不要在此处上传",
|
||
"Don't": "不要",
|
||
"Don't apply to negative prompts": "不将此设置应用到反向提示词",
|
||
"Don't cache latents": "不缓存潜变量",
|
||
"Don't Cache Latents": "不缓存潜变量",
|
||
"don't delete upscaled imgs": "不删除放大前的图像",
|
||
"Don't generate images": "不生成图像",
|
||
"Don't generate, only upscale": "不生成，仅放大",
|
||
"Don't outfill": "不进行填充",
|
||
"Don't Override": "不覆盖",
|
||
"Don't use prompt magic on negative prompts.": "不将魔法提示词应用到反向提示词",
|
||
"Don’t use wierd blocky upscale mode. Or maybe do?": "不要用 \"糟糕的分块放大模式\" ，或者也许可以试试？",
|
||
"dot size": "点大小",
|
||
"double-straight-line": "双直线",
|
||
"down": "下",
|
||
"Download": "下载",
|
||
"Download All files": "下载所有文件",
|
||
"Download configuration files from CivitAI": "从 CivitAI 下载配置文件",
|
||
"💾 Download image": "💾 下载图片",
|
||
"Download localization template": "导出 localization 模板",
|
||
"Download Max Size Preview": "下载最大尺寸预览图",
|
||
"Download missing models upon reading generation parameters from prompt": "从生成参数中的提示词读取并下载缺失的模型",
|
||
"Download missing preview images on startup": "启动时下载缺失的模型预览图",
|
||
"Download Model": "下载模型",
|
||
"Download NSFW (adult) preview images": "允许下载含成人内容的预览图",
|
||
"Download system info": "下载系统信息",
|
||
"Download the pose as .json file": "以 .json 格式保存姿态图",
|
||
"Downscaling": "缩小",
|
||
"Drag Me": "拖动页面",
|
||
"Draw full canvas background": "绘制完整的画布背景",
|
||
"Drawing": "绘画",
|
||
"Drawing Canvas": "创建画布",
|
||
"Draw legend": "包含图例注释",
|
||
"Draw Legends": "包含图例注释",
|
||
"Draw mask": "绘制蒙版",
|
||
"Draw region + show mask": "绘制区域和显示蒙版",
|
||
"Dreambooth": "Dreambooth",
|
||
"dropdown": "下拉列表",
|
||
"Dropdown": "下拉列表",
|
||
"Drop File Here": "拖拽文件到此",
|
||
"Drop Image Here": "拖动图像至此",
|
||
"Drop out tags when creating prompts.": "创建提示词时丢弃标签(tags)",
|
||
"Drop tabs here to hide them": "把选项卡拖到此处隐藏它们",
|
||
"Drop Video Here": "拖动视频至此",
|
||
"Dry Run": "试运行",
|
||
"Due to ControlNet base extension's inner works it needs its models to be located at 'extensions/deforum-for-automatic1111-webui/models'. So copy, symlink or move them there until a more elegant solution is found. And, as of now, it requires use_init checked for the first run. The ControlNet extension version used in the dev process is a24089a62e70a7fae44b7bf35b51fd584dd55e25, if even with all the other options above used it still breaks, upgrade/downgrade your CN version to this one.": "因为 ControlNet 基层插件在内工作，所以需要将 ControlNet 模型置于 “extensions/deforum-for-automatic1111-webui/models”文件夹内。在更优雅的解决方法出现之前，请复制，软链接 symlink 或者移动模型。 \n同时目前为止，该插件需要在第一次运行时检查 use_init。\n用于开发进程的 ControlNet 插件版本为 a24089a62e70a7fae44b7bf35b51fd584dd55e25。如果全部按照上文使用还是损坏，请将 ControlNet 版本升级/降级到上述版本。",
|
||
"Due to the limitation of Segment Anything, when there are point prompts, at most 1 box prompt will be allowed; when there are multiple box prompts, no point prompts are allowed.": "由于Segment Anything的限制，当有标记点时，最多允许1个箱体标记；当有多个箱体提示时，不允许使用标记点。",
|
||
"duplicate": "重复的",
|
||
"Duplicate Skeleton (X-axis)": "复制骨架(X 轴)",
|
||
"Duplicate Skeleton (Z-axis)": "复制骨架(Z 轴)",
|
||
"Duration": "时长",
|
||
"during the run sequence, only frames specified by this value will be extracted, saved, and diffused upon. A value of 1 indicates that every frame is to be accounted for. Values of 2 will use every other frame for the sequence. Higher values will skip that number of frames respectively.": "在运行序列期间，只有由该值指定的帧才会被提取、保存和生成。1表示要考虑全部帧。2表示每隔一帧用于序列。设置更较高的 N 值，每次提取将分别跳过 N 帧。",
|
||
"dw_openpose_full": "dw_openpose_full (二阶蒸馏 - 全身姿态估计)",
|
||
"Dynamic Image Normalization": "图像动态归一化",
|
||
"Dynamic Prompts": "Dynamic Prompts (动态提示词)",
|
||
"Dynamic Prompts enabled": "启用动态提示词",
|
||
"dynamicprompts library is version 0.29.0": "dynamic prompts 库的版本为: 0.29.0",
|
||
"Each image is center-cropped with an automatically chosen width and height.": "每张图片都会以自动选择好的宽和高进行中心裁剪",
|
||
"Each Tags": "每个标签",
|
||
"Early stopping parameter for CLIP model; 1 is stop at last layer as usual, 2 is stop at penultimate layer, etc.": "CLIP 模型的提前终止层参数；1是像往常一样停在最后一层，2是停在倒数第二层，以此类推",
|
||
"Easy editing": "简易编辑",
|
||
"EBSynth Mode": "EBSynth 模式",
|
||
"Ebsynth-Process": "Ebsynth-流程",
|
||
"EBSynth Settings": "Ebsynth 设置",
|
||
"[Ebsynth Utility]->[configuration]->[stage 2]->[Threshold of delta frame edge]": "[Ebsynth Utility]->[插件设置]->[步骤 2]->[关键帧间隔差异阈值]",
|
||
"edit": "编辑",
|
||
"Edit": "编辑",
|
||
"Edit Caption": "编辑描述",
|
||
"Edit Caption of Selected Image": "编辑被选图片的描述",
|
||
"Edit common tags.": "编辑常见标签",
|
||
"Edit Exif": "编辑 EXIF 信息",
|
||
"editing": "后期编辑",
|
||
"Editing Enabled": "开启元数据编辑",
|
||
"Edit metadata": "编辑元数据",
|
||
"Edit Model Basic Data": "编辑模型基本数据",
|
||
"Edit Model Trigger Words": "编辑模型触发词",
|
||
"Edit Openpose": "编辑 Openpose",
|
||
"edit prompt words...": "编辑提示词...",
|
||
"edit prompt words... ": "编辑提示词...",
|
||
"Edit styles": "编辑预设样式",
|
||
"Edit SVG": "编辑 SVG",
|
||
"Edit Tags": "编辑标签 （Edit Tags）",
|
||
"Edit workflow type": "编辑工作流类型",
|
||
"Effect": "效果",
|
||
"Effective Block Analyzer": "高效区块分析器",
|
||
"(e.g. \"hair/colours/light/...\")": "(例如: \"hair/colors/light/...\")",
|
||
"Elemental": "组件",
|
||
"Elemental Merge, Adjust": "按模型组件合并, 调整",
|
||
"elements": "组件",
|
||
"EMA (nagetive)": "EMA (负)",
|
||
"ema-only": "仅保留 EMA 权重",
|
||
"EMA (positive)": "EMA (正)",
|
||
"Embedding": "嵌入式模型 (Embedding)",
|
||
"Embedding Learning rate": "嵌入式模型学习率",
|
||
"Embeddings: loaded": "嵌入式(Embeddings):已加载",
|
||
"Embeddings: skipped": "嵌入式(Embeddings):已跳过",
|
||
"Embed photo": "嵌入照片",
|
||
"Emphasis: use (text) to make model pay more attention to text and [text] to make it pay less attention": "强调符：使用 (文字) 使模型更关注该文本，使用 [文字] 减少其关注度",
|
||
"empty cannot be saved": "留空时无法保存",
|
||
"empty strings cannot be translated": "无法翻译空的文本",
|
||
"Enable": "启用",
|
||
"Enable AA for Downscaling.": "缩小时使用抗锯齿",
|
||
"Enable AA for Upscaling.": "放大时使用抗锯齿",
|
||
"Enable ADetailer": "启用 After Detailer",
|
||
"Enable Ancestral ETA scheduling": "启用 Ancestral 采样方法 ETA 调度",
|
||
"Enable AnimateDiff": "启用 AnimateDiff",
|
||
"Enable Anti Burn (and everything)": "启用 Anti Burn",
|
||
"Enable Autocomplete": "启用标签自动补全",
|
||
"Enable Autopruning": "启用自动修剪",
|
||
"Enable batch mode": "启用批处理模式",
|
||
"Enable Bilingual Localization": "启用双语对照翻译插件",
|
||
"Enable CFG-Based guidance": "启用基于 CFG 的引导 (CFG-Based guidance)",
|
||
"Enable checkpoint scheduling": "启用模型调度计划",
|
||
"Enable clear gallery button in txt2img and img2img tabs": "在文生图和图生图标签页中启用清除图片输出栏按钮",
|
||
"Enable CLIP skip scheduling": "启用 CLIP 终止层数调度",
|
||
"Enable color correction": "启用颜色校正",
|
||
"Enable Control": "启用控制",
|
||
"Enable controlnet tile resample": "启用 ControlNet 的 tile resample (分块 - 重采样)",
|
||
"enabled": "启用",
|
||
"Enabled": "启用",
|
||
"Enable Dev mode - adds extra reporting in console": "启用开发者模式 - 在控制台中打印额外回报信息",
|
||
"Enable Dynamic Thresholding (CFG Scale Fix)": "启用动态阈值 (CFG Scale 修复)",
|
||
"Enable emphasis": "启用强调符",
|
||
"Enable extension": "启用插件",
|
||
"Enable extra network tweaks": "启用扩展网络修改",
|
||
"Enable extras": "打开 ▼",
|
||
"Enable Face Prompt": "启用脸部提示词",
|
||
"Enable feedback during hires. fix": "在高清修复过程中应用反馈",
|
||
"enable for seamless-tiling of each generated image. Experimental": "启用以使得每个生成的图像都能实现无缝拼接 (实验性)",
|
||
"Enable full page image viewer": "启用网页全屏图像查看器",
|
||
"Enable GroundingDINO": "启用 GroundingDINO",
|
||
"Enable guided images mode": "启用图像引导模式",
|
||
"Enable Hires. fix+": "启用高分修复PLUS",
|
||
"Enable JavaScript aspect ratio controls": "启用前端纵横比控制",
|
||
"Enable Jinja2 templates": "启用 Jinja2 模板",
|
||
"Enable Maintenance tab": "启用 \"维护\" 选项卡",
|
||
"Enable model compile (experimental)": "启用模型编译优化（实验性）",
|
||
"Enable MultiDiffusion": "启用 MultiDiffusion",
|
||
"Enable neutral-prompt extension": "启用 Neutral Prompt 扩展",
|
||
"Enable Noise Inversion": "启用噪声反转",
|
||
"Enable noise multiplier scheduling": "启用噪声倍率调度",
|
||
"Enable optimized monocular depth estimation": "启用单色深度估算优化 (optimized monocular depth estimation)",
|
||
"Enable overwrite": "允许覆盖",
|
||
"Enable perspective flip": "启用透视翻转",
|
||
"Enable pixelization": "启用像素化",
|
||
"Enable Pixel Perfect from lllyasviel. Configure your target width and height on txt2img/img2img default panel before preview if you wish to enable pixel perfect.": "启用 lllyasviel 的完美像素模式。在预览前，请在文生图/图生图界面配置好图像的目标宽度和高度。",
|
||
"Enable postprocessing operations in txt2img and img2img tabs": "在文生图/图生图选项卡中启用后处理操作",
|
||
"Enable quantization in K samplers for sharper and cleaner results": "对 K 采样器启用量化以获得更清晰、干净的结果",
|
||
"Enable quantization in K samplers for sharper and cleaner results. This may change existing seeds": "对 K-diffusion 采样方法启用量化以获得更清晰、干净的结果。这可能会改变现有的随机种子",
|
||
"Enable quantization in K samplers for sharper and cleaner results. This may change existing seeds. Requires restart to apply.": "对 K 采样器启用量化以获得更清晰、干净的结果。这可能会改变现有的随机种子。需重启才能应用。",
|
||
"Enable Randomize extension": "启用随机化扩展",
|
||
"Enable Refiner": "启用 Refiner",
|
||
"Enable Region 1": "启用区域 1",
|
||
"Enable Region 2": "启用区域 2",
|
||
"Enable Region 3": "启用区域 3",
|
||
"Enable Region 4": "启用区域 4",
|
||
"Enable Region 5": "启用区域 5",
|
||
"Enable Region 6": "启用区域 6",
|
||
"Enable Region 7": "启用区域 7",
|
||
"Enable Region 8": "启用区域 8",
|
||
"enables 2D mode functions to simulate faux 3D movement": "启用 2D 模式的功能来仿照模拟 3D 运动",
|
||
"Enable sampler scheduling": "启用采样方法调度计划",
|
||
"Enable sd-webui-comfyui extension": "启用 sd-webui-comfyui 扩展",
|
||
"Enable steps scheduling": "启用迭代步数调度计划",
|
||
"(enable stochasticity; start value of the sigma range; only applies to Euler, Heun, and DPM2)": "(启用随机流失率; sigma 波动范围的最低值; 仅作用于 Euler, Heun, 和 DPM2 采样方法)",
|
||
"Enable Style Selector": "启用样式选择器",
|
||
"Enable Subseed scheduling": "启用第二种子调度计划",
|
||
"Enable Tag Autocompletion": "启用标签自动补全",
|
||
"Enable tensorboard logging": "启用 Tensorboard 日志记录",
|
||
"Enable tensorboard logging.": "启用 Tensorboard 日志记录",
|
||
"Enable this to generate model with fp16 precision. Results in a smaller checkpoint with minimal loss in quality.": "启用本选项可生成 fp16 精度的模型。缩小模型体积的同时尽量把质量损失降到最低。",
|
||
"Enable this to save VRAM.": "启用此项以节省显存 (VRAM)。",
|
||
"Enable thumbnail tooltips": "启用缩略图工具提示",
|
||
"Enable Tiled Diffusion": "启用 Tiled Diffusion",
|
||
"Enable Tiled VAE": "启用 Tiled VAE",
|
||
"Enable tooltip on the canvas": "启用画布上的工具列提示框",
|
||
"enable to trigger webui's face restoration on each frame during the generation": "启用以在每一帧生成过程中触发 webui 的面部修复功能",
|
||
"Enable uploading manually created mask to SAM.": "启用手动上传蒙版到 SAM。",
|
||
"Enable upscale with extras": "启用后期处理放大",
|
||
"Enable Vectorizing": "启用矢量化",
|
||
"Enable webcam": "开启网络摄像头",
|
||
"Enabling this will provide better results and editability, but cost more VRAM.": "启用此功能将提供更好的结果和可编辑性，但会消耗更多显存。",
|
||
"Enabling this will save the EMA unet weights as the 'normal' model weights and ignore the regular unet weights.": "启用本选项会把 EMA U-Net 权重作为 “正常” 模型的权重保存，并且会无视常规 U-Net 权重。",
|
||
"Encoder Color Fix": "编码器颜色修复",
|
||
"Encoder Tile Size": "编码器分块大小",
|
||
"end at this step": "结束控制步数",
|
||
"End blur width": "结束模糊宽度",
|
||
"Ending Control Step": "引导终止时机",
|
||
"Ending Control Step schedule": "结束引导时机调度计划",
|
||
"End Page": "尾页",
|
||
"end the animation at this frame number": "达成此帧数后停止生成",
|
||
"Engages hybrid compositing of video into animation in various ways with comp alpha as a master mix control.": "使用多种方式参与视频转动画的合成过程, 以合成透明度作为主要方式控制混合",
|
||
"Engine": "引擎",
|
||
"Enhance": "增强",
|
||
"Enhanced img2img": "Enhanced img2img (图生图增强)",
|
||
"(ENSD; does not improve anything, just produces different results for ancestral samplers - only useful for reproducing images)": "(ENSD: 对图像质量无任何提升, 只为 Ancestral 采样方法产生不同的结果 - 仅对复现图像有用)",
|
||
"Enter a model name for saving checkpoints and lora models.": "输入一个模型名来保存 checkpoints 和 lora 模型",
|
||
"enter any additional notes": "输入任何附加注意事项",
|
||
"Enter categody ids, separated by +. For example, if you want bed+person, your input should be 7+12 for ade20k and 59+0 for coco.": "在此输入类别 ID，用 + 分隔。例如，如果你想分割出 床 + 人，使用ade20k协议应该输入 7 + 12，使用coco协议应该输入 59 + 0。",
|
||
"Enter category IDs": "输入类别ID",
|
||
"Enter file name to save": "输入要保存的文件名",
|
||
"Enter hypernetwork Dropout structure (or empty). Recommended : 0~0.35 incrementing sequence: 0, 0.05, 0.15": "输入 Hypernetwork Dropout 结构（或留空）\n推荐：0~0.35\n递增排序：0、0.05、0.15",
|
||
"Enter hypernetwork layer structure": "超网络层结构",
|
||
"Enter input path": "填写输入目录",
|
||
"Enter output path": "填写输出目录",
|
||
"Enter prompt here": "在此处输入提示词",
|
||
"Enter prompts (one line for one trigger words)": "输入提示词（一行一个触发词）",
|
||
"Enter relative to webui folder or Full-Absolute path, and make sure it ends with something like this: '20230124234916_%09d.png', just replace 20230124234916 with your batch ID. The %05d is important, don't forget it!": "输入绝对路径或者以 webui 为根目录的相对路径，同时确认路径结尾类似“20230124234916_%09d.png”。只需要将 20230124234916 替换为你的 batch ID。“%05d”很重要，别忘了！",
|
||
"Enter relative to webui folder or Full-Absolute path, and make sure it ends with something like this: '20230124234916_%09d.png', just replace 20230124234916 with your batch ID. The %09d is important, don't forget it!": "输入相对于 webui 文件夹的路径或者绝对路径，并确保图片以这样的名称为后缀: '20230124234916_%09d.png'，用批次名称替换 20230124234916 即可。别忘了 ％09d ，它很重要!",
|
||
"Enter the path to a txt file containing sample prompts.": "输入包含样本图像提示词的 txt 文本文件的路径",
|
||
"enter username for submission": "输入用户名以提交",
|
||
"Enter your custom name.": "输入自定义名称",
|
||
"Enter your prompt word (trigger word/prompt/negative prompt)": "输入你的提示词（触发词/提示词/反向提示词）",
|
||
"Enter your trigger word. EX: character_name_\\(title of novel\\)": "输入触发词。例如：character_name_\\(title of novel\\)",
|
||
"Entire Caption": "整个描述",
|
||
"Epochs to Simulate": "模拟 Epochs 数",
|
||
"Equirectangular projection": "等距柱状投影图",
|
||
"Erase BG": "移除背景图",
|
||
"Error": "错误",
|
||
"Error Correction Level": "纠错等级",
|
||
"Error threshold": "错误阈值 (%)",
|
||
"Escape brackets": "将结果中的括号进行转义处理",
|
||
"Escape parentheses on insertion": "插入时转义括号",
|
||
"Eta for ancestral samplers": "Ancestral 采样方法的 η 系数",
|
||
"Eta for DDIM": "DDIM 采样方法的 Eta 系数",
|
||
"Eta for k-diffusion samplers": "k-diffusion 采样方法的 Eta 系数",
|
||
"eta (noise multiplier) for ancestral samplers": "Ancestral 采样器的 Eta (噪声倍率)",
|
||
"eta (noise multiplier) for DDIM": "DDIM 的 Eta (噪声倍率) ",
|
||
"Eta noise seed delta": "η 噪声种子偏移量 (ENSD)",
|
||
"etc": "其他",
|
||
"Euler Ancestral - very creative, each can get a completely different picture depending on step count, setting steps higher than 30-40 does not help": "Euler Ancestral - 非常有创意，取决于迭代步数不同而生成完全不同的图像，这意味着将迭代步数设置为高于 30-40 不会有任何帮助",
|
||
"EX: ": "例如：",
|
||
"ex A.": "例 A：",
|
||
"Examine the instance and class images and report any instance images without corresponding class images.": "检查实例和类别图像，并回报任何没有相应类别图像的实例图像。",
|
||
"Example: Default args should use 221 as the total keyframes.": "示例：默认参数下应设置 221 作为关键帧总数",
|
||
"Example: Default args should use 221 as total keyframes.": "示例：默认参数应使用 221 作为总关键帧数。",
|
||
"Example flow:": "工作流示例: ",
|
||
"Examples": "例子",
|
||
"Example: seed_schedule could use 0:(5), 1:(-1), 219:(-1), 220:(5)": "示例：种子调度计划可以这么填写 0:(5), 1:(-1), 219:(-1), 220:(5)",
|
||
"Example: seed_schedule could use 0:(s), 1:(-1), \"max_f-2\":(-1), \"max_f-1\":(s)": "示例：种子调度计划可以设置为 0:(s), 1:(-1), \"max_f-2\":(-1), \"max_f-1\":(s)",
|
||
"Example: strength_schedule could use 0:(0.25 * cos((72 / 60 * 3.141 * (t + 0) / 30))**13 + 0.7) to make alternating changes each 30 frames": "示例：强度调度计划可以设置为 0:(0.25 * cos((72 / 60 * 3.141 * (t + 0) / 30))**13 + 0.7) 来使强度在每过 30 帧交替一次变化",
|
||
"ex B.": "例 B：",
|
||
"ex C.": "例 C：",
|
||
"Excluded Tag confidences": "排除标签置信度",
|
||
"Excluded tags": "排除标签",
|
||
"Exclude tag, ..": "排除标签, ..",
|
||
"Exclude tags (split by comma)": "排除标签 (逗号分隔)",
|
||
"Exclude Target (e.g., finger, book)": "排除目标（如 finger, book）",
|
||
"exclusion": "排除",
|
||
"Excudes (split by comma)": "排除 (逗号分隔)",
|
||
"exif_data": "EXIF 数据",
|
||
"exif keyword": "EXIF 关键词",
|
||
"EXIF keyword search": "EXIF 关键词搜索",
|
||
"Existing Caption txt Action": "对已有标注的 txt 文件的操作",
|
||
"Expanded Mask": "扩展后蒙版",
|
||
"Expand Mask": "展开蒙版设置",
|
||
"Expand mask region": "展开蒙版区域",
|
||
"(Experimental, keep cond caches across jobs, reduce overhead.)": "(实验性功能；在不同任务中保留缓存以减少开销)",
|
||
"EXPERIMENTAL: LoRA Shared Diffusers Source": "实验性: 共享 LoRA Diffusers 来源",
|
||
"Experimental Settings": "实验性设置",
|
||
"Experimental Shared Source:": "实验性共享来源:",
|
||
"Experimental Shared Src": "实验性共享来源",
|
||
"Export": "导出",
|
||
"Exported Text": "输出文本",
|
||
"Export type": "输出类型",
|
||
"ExposureOffset": "曝光偏移",
|
||
"expressionism": "expressionism (表现主义)",
|
||
"extcrop": "裁剪后扩展",
|
||
"Extended prompt guide (jp)": "扩展提示词指南 (日语)",
|
||
"Extension": "扩展",
|
||
"Extension index URL": "扩展列表地址",
|
||
"Extensions": "扩展",
|
||
"Extension State": "扩展状态",
|
||
"extension to be installed.": " 插件",
|
||
"extension to be installed, but will work with it disabled.)": " 扩展, 但本选项功能可以在其禁用时生效)",
|
||
"Extension version": "扩展版本",
|
||
"extensive": "大量",
|
||
"extfull": "填充至完整",
|
||
"extra": "额外",
|
||
"Extra": "▼",
|
||
"Extra args": "额外参数",
|
||
"Extra arguments": "额外参数",
|
||
"Extra arguments for trtexec command in plain text form": "以纯文本形式填写用于 trtexec 命令的额外参数",
|
||
"Extra .cni file": "单独的 .cni 文件",
|
||
"Extract EMA Weights": "提取 EMA 权重",
|
||
"Extract frames from the original video.": "将原始视频转换为帧序列。",
|
||
"Extract from frame": "提取开始帧",
|
||
"Extract nth frame": "每 N 帧提取一次",
|
||
"Extract to frame": "提取结束帧",
|
||
"Extract U-Net features": "提取 U-Net 特征值",
|
||
"Extra filename": "额外文件名",
|
||
"Extra filename (for small sets of custom tags)": "额外文件名（用于小部分的自定义Tag）",
|
||
"Extra generation params": "附加生成参数",
|
||
"Extra network card height": "扩展模型卡片高度",
|
||
"Extra network card width": "扩展模型卡片宽度",
|
||
"Extra Networks": "扩展模型",
|
||
"Extra networks separator": "扩展模型分隔文本",
|
||
"Extra networks tab order": "扩展模型类型选项卡顺序",
|
||
"Extra noise multiplier for img2img and hires fix": "图生图和高分辨率修复的额外噪声倍率",
|
||
"Extra paths to scan for LoRA models, comma-separated. Paths containing commas must be enclosed in double quotes. In the path, \" (one quote) must be replaced by \"\" (two quotes).": "扫描低秩微调模型 (LoRA) 的附加目录，以逗号分隔。包含逗号的路径必须用双引号括起来。 在路径中，\"（一个引号）必须替换为\"\"（两个引号）。",
|
||
"Extra path to scan for ControlNet models (e.g. training output directory)": "检索 ControlNet 模型的附加目录（如训练输出目录）",
|
||
"extras": "后期处理",
|
||
"Extras": "后期处理",
|
||
"Extra steps": "额外迭代步数",
|
||
"(extra text to add before <...> when adding extra network to prompt)": "(添加扩展模型到提示词时, 在 <...> 之前添加的额外文本)",
|
||
"Extra text to add before <...> when adding extra network to prompt": "在向提示词中添加扩展模型标签时在 <…> 之前添加额外文本",
|
||
"Extremely slow (OpenCV + FaceMesh)": "极慢 (OpenCV + FaceMesh)",
|
||
"Face": "脸部",
|
||
"Face Area Magnification": "脸部区域扩展",
|
||
"Face Crop option": "脸部修复选项",
|
||
"Face Crop Resolution": "脸部修复分辨率",
|
||
"Face Denoising Strength": "脸部去噪强度",
|
||
"Face detection confidence": "脸部识别强度",
|
||
"Face Detection Method": "人脸识别算法",
|
||
"Face Editor": "Face Editor (脸部修复)",
|
||
"Face margin": "脸部区域大小",
|
||
"face model resolution": "脸部模型分辨率",
|
||
"Face restoration": "面部修复",
|
||
"Face restoration model": "面部修复模型",
|
||
"Face Restore Model": "面部修复模型",
|
||
"Fall-off exponent (lower=higher detail)": "衰减指数(越小 = 细节越多)",
|
||
"False": "否",
|
||
"fantasy": "fantasy (魔幻)",
|
||
"Far clip": "远端衰减",
|
||
"Far schedule": "远处裁面距离调度计划",
|
||
"fashion": "fashion (时尚)",
|
||
"fast": "快速",
|
||
"Fast Decoder": "使用快速解码器",
|
||
"Fast Encoder": "使用快速编码器",
|
||
"Fast Encoder Color Fix": "快速编码器颜色修复",
|
||
"Fast Encoder may change colors; Can fix it with more RAM and lower speed.": "快速编码器可能会导致颜色偏差；通过使用更大的内存和更慢的速度可以避免这个情况",
|
||
"faster": "稍快",
|
||
"fauvism": "fauvism (野兽派)",
|
||
"favorites": "收藏夹",
|
||
"Favorites": "收藏夹",
|
||
"Favorites path from settings: log/images": "从设置中获取收藏夹路径: log/images",
|
||
"Fax": "传真",
|
||
"Feedback end": "反馈终止时机",
|
||
"Feedback start": "反馈介入时机",
|
||
"Fetch output folder from a1111 settings (Reload needed to enable)": "从 webui 设置中获取输出文件夹 (需重载以启用)",
|
||
"ffmpeg binary. Only set this if it fails otherwise.": "FFMPEG二进制。 只有在其他情况下失败时才设置这个。",
|
||
"FFmpeg CRF value": "FFmpeg CRF 值",
|
||
"FFmpeg path/ location": "FFmpeg 路径",
|
||
"FFmpeg Preset": "FFmpeg 预设",
|
||
"FFmpeg settings": "FFmpeg 设置",
|
||
"Fields managed in your Parseq manifest override the values and schedules set in other parts of this UI. You can select which values to override by using the \"Managed Fields\" section in Parseq.": "参数定序器清单中管理的字段会覆盖本用户界面其他部分设置的值和调度计划。可以通过参数定序器中的 \" 管理字段 (Managed Fields)\"选择要覆盖的值",
|
||
"figurativism": "figurativism (具象主义)",
|
||
"File": "文件",
|
||
"File editor": "编辑文件",
|
||
"File extensions": "文件扩展名",
|
||
"File format for grids": "网格图文件格式",
|
||
"File format for images": "图片文件后缀（格式）",
|
||
"file_from": "源文件名",
|
||
"file_name": "文件名",
|
||
"filename": "文件名",
|
||
"Filename": "文件名",
|
||
"File Name": "文件名",
|
||
"Filename join string": "文件名连接用字符串",
|
||
"Filename keyword search": "文件名关键词搜索",
|
||
"filename(option)": "文件名 (可选)",
|
||
"File name or path": "文件名或路径",
|
||
"Filename word regex": "文件名用词的正则表达式",
|
||
"Filepath:": "文件路径：",
|
||
"Files in the output directory may be overwritten.": "输出目录中的文件可能会被覆盖。",
|
||
"File size:": "文件大小:",
|
||
"File size limit for the above option, MB": "上述选项的文件大小限制 (单位: MB)",
|
||
"Files to process": "要处理的文件",
|
||
"File system": "文件系统",
|
||
"file_to": "目标仓库",
|
||
"File type": "文件类型",
|
||
"Filewords": "提示词文件 (Filewords)",
|
||
"fill": "填充",
|
||
"fill down": "向下扩展",
|
||
"fill it with colors of the image": "用图像颜色 (高强度模糊) 填充",
|
||
"fill it with latent space noise": "用潜空间噪声填充",
|
||
"fill it with latent space zeroes": "用空白潜空间填充",
|
||
"fill left": "向左扩展",
|
||
"fill right": "向右扩展",
|
||
"fill up": "向上扩展",
|
||
"Filter by Selection": "通过选择过滤",
|
||
"Filter by Tags": "通过标签过滤",
|
||
"Filter Images": "过滤图片",
|
||
"Filter Images by Tags": "通过标签过滤图片",
|
||
"Filter Logic": "过滤逻辑",
|
||
"Filter models by path name": "按路径名筛选模型",
|
||
"Filter NSFW content": "过滤成人内容 (NSFW)",
|
||
"Filter out following properties (comma seperated). Example film grain, purple, cat": "过滤以下提示词包含的属性 (逗号分隔). 例如: film grain, purple, cat",
|
||
"Filter values": "过滤值",
|
||
"Final denoising strength": "最终重绘幅度",
|
||
"Find and manage wildcards in the Wildcards Manager tab.": "在通配符管理选项卡中管理你的通配符",
|
||
"find but bo translated:": "已找到但无翻译：",
|
||
"Find more settings on the": "更多设置见",
|
||
"Find your cozy spot on Auto1111's webui": "探寻 Auto1111 webui 最舒适的使用方式",
|
||
"First": "First (第一生成帧)",
|
||
"First frame as init image": "第一帧作为初始化图像",
|
||
"first frame of img2img result": "图生图结果的第一帧",
|
||
"FirstGen": "FirstGen (处理后生成的第一帧)",
|
||
"First Name": "名字",
|
||
"First Page": "首页",
|
||
"Firstpass height": "首次生成高度",
|
||
"Firstpass width": "首次生成宽度",
|
||
"First upscaler": "第一放大方法",
|
||
"Fit video length": "适配视频长度",
|
||
"Fix broken CLIP position IDs": "修复损坏的 Clip position ID",
|
||
"Fix clip": "修复 CLIP",
|
||
"fixed": "固定",
|
||
"Fixed seed": "固定种子",
|
||
"(fixes very slow loading speed in some cases)": "(修复某些情况下加载速度非常慢的问题)",
|
||
"Flip": "翻转",
|
||
"Flow consistency mask": "光流一致性蒙版",
|
||
"Flow factor schedule": "光流系数调度计划",
|
||
"Flow method": "光流算法",
|
||
"Focal point entropy weight": "焦点熵权重",
|
||
"Focal point face weight": "焦点面部权重",
|
||
"folder_from": "源文件夹",
|
||
"folder_to": "目标仓库",
|
||
"Follow installation instructions here": "请跟随此处的安装指引",
|
||
"Font color": "字体颜色",
|
||
"Font for image grids that have text": "网格图文字字体",
|
||
"Font size": "字体大小",
|
||
"Foot Size": "脚掌尺寸",
|
||
"for ade20k and": "来获得 ade20k 类别, 查看",
|
||
"For advanced keyframing with Math functions, see": "对于想使用数学函数执行高级关键帧控制的用户，请参阅",
|
||
"For advanced users, you can create a permanent file in \\OneButtonPrompt\\userfiles\\ called antilist.csv": "对于专业用户，可以在 \\OneButtonPrompt\\userfiles\\ 中创建一个永久文件，命名为 antilist.csv",
|
||
"for backward compatibility. uses the formula: `width/height`": "为了向后兼容性。请使用以下格式: `宽度/高度`",
|
||
"For best prompts with Stable Diffusion 1.* choose the": "要获得 Stable Diffusion 1.x 的最佳提示词，请选择 ",
|
||
"For best prompts with Stable Diffusion 2.* choose the": "要获得 Stable Diffusion 2.x 的最佳提示词，请选择 ",
|
||
"force all frames to be in grayscale": "强制所有帧图像为灰度",
|
||
"Force convert half to float on interpolation (for some platforms)": "在插值时强制将半精度浮点数转换为全精度 (适用于部分平台)",
|
||
"Force CPU (Requires Custom Script Reload)": "强制使用 CPU (需重载自定义脚本)",
|
||
"Force image gallery to use temporary files": "强制图库使用临时文件",
|
||
"Force Reset": "强制重置",
|
||
"Force touch mode": "强制触摸模式",
|
||
"for coco to get category->id map. Note that coco jumps some numbers, so the actual ID is line_number - 21.": "来获得 coco 的类别 -> id 映射。需注意: coco 会跳过部分数字，所以实际 ID 应该是 “划定数字 - 21 (line_number - 21)”",
|
||
"for depth map.": "获取深度图更多信息",
|
||
"for detailed explanation.": "以了解详细信息。",
|
||
"Forearm": "前臂长度",
|
||
"Foreground": "前景",
|
||
"Foreground Transparency": "前景透明度",
|
||
"for explanation of each parameter. If you still cannot understand, use default.": "以了解每个参数的含义。如果仍不理解，请保持默认。",
|
||
"FOR HELP CLICK HERE": "点击此处获取帮助",
|
||
"For hires fix, calculate conds of second pass using extra networks of first pass.": "对高清修复使用第一层的扩展网络来为第二层计算条件",
|
||
"For hires fix, use width/height sliders to set final resolution rather than first pass (disables Upscale by, Resize width/height to).": "在高分辨率修复中，通过长宽滑块设定最终分辨率 (关闭放大倍率和自适应分辨率设置)",
|
||
"for how many frames the same seed should stick before iterating to the next one": "在迭代到下一个新种子之前该种子应使用多少帧",
|
||
"For image processing do exactly the amount of steps as specified": "在进行图片处理时，准确执行滑块所指定的迭代步数",
|
||
"For inpainting, include masked composite in results for web": "使用重绘时，在网页结果中包含复合蒙版",
|
||
"For inpainting, include the greyscale mask in results for web": "使用重绘时，在网页结果中包含灰度蒙版图",
|
||
"For inpainting, save a copy of the greyscale mask": "使用重绘时，保存一份灰度蒙版副本",
|
||
"For inpainting, save a masked composite": "使用重绘时，保存一份复合蒙版",
|
||
"Format": "格式",
|
||
"format: http://127.0.0.1:port": "格式: http://127.0.0.1:端口号",
|
||
"For more details, and functionality, see the documentation (coming soon)": "更多细节和功能，请查阅文档（筹备中）",
|
||
"for more detials": " 来查看更多细节",
|
||
"for more info/ a Guide.": "获取更多信息 / 指南",
|
||
"For negative prompts, please write your positive prompt, then --neg ugly, text, assymetric, or any other negative tokens of your choice. OR:": "对于反向提示词，请写出你的正向提示词，然后添加 --neg ugly,text,assymetric 等您选择的任何其他反向提示词。或者：",
|
||
"For SD upscale, how much overlap in pixels should there be between tiles. Tiles overlap so that when they are merged back into one picture, there is no clearly visible seam.": "使用 SD 放大 (SD upscale) 时，分块(Tiles)间的像素重叠宽度\n分块(Tiles)间重叠有助于使它们合并最终图像时避免过于明显的接缝",
|
||
"(for small sets of custom tags)": "(少量的自定义标签)",
|
||
"for supported extensions)": " 寻找已支持的扩展)",
|
||
"for your animation (leave blank to ignore).": "用于你的动画中（留空表示忽略）",
|
||
"Found a bug or want to ask for a feature ? Please": "发现了一个错误或想请求添加一个功能？请",
|
||
"Found a bug or want to ask for a feature ? Please use": "发现了一个错误或想请求添加一个功能？请使用",
|
||
"Found a bug or want to ask for a feature ? Please use ": "发现了 Bug 或者有个新的想法？请访问 ",
|
||
"Found tags": "匹配的标签",
|
||
"FOV schedule": "视场角(FOV)调度计划",
|
||
"fp16": "fp16",
|
||
"fp32": "fp32",
|
||
"fps": "帧率",
|
||
"fps: ": "帧率：",
|
||
"FPS": "帧率",
|
||
"fraction of sampling steps when the switch to refiner model should happen; 1=never, 0.5=switch in the middle of generation": "在迭代步数完成占比的多少切换 Refiner 模型; 1 = 不切换, 0.5 = 在生成迭代步数完成一半时切换",
|
||
"(fraction of sampling steps when the swtch to refiner model should happen; 1=never, 0.5=switch in the middle of generation)": "(在迭代步数完成占比的多少切换 Refiner 模型; 1 = 不切换, 0.5 = 在生成迭代步数完成一半时切换)",
|
||
"frame extracted": "帧序列转换完成。",
|
||
"Frame Height": "帧高度",
|
||
"Frame Interpolation": "帧插值",
|
||
"Frame Interpolation to smooth out, slow-mo (or both) any video.": " 进行帧插值来让任何视频获得顺滑的切换效果，慢动作 (或两者皆可)",
|
||
"Frame Interpolation will *not* run if any of the following are enabled: 'Store frames in ram' / 'Skip video for run all'.": "帧差值将不会在以下任一选项启用时启动：“保存帧图像到内存” / “跳过视频”",
|
||
"Framerate": "帧率",
|
||
"Frames": "总帧数",
|
||
"frames per keyframe": "每几帧提取1个关键帧",
|
||
"Frames per second (FPS)": "帧率 (FPS)",
|
||
"Frames Per Wave": "每波帧数",
|
||
"Frames to Video": "帧图片转视频",
|
||
"Frame Width": "帧宽度",
|
||
"Free GPU": "释放显存",
|
||
"Freeze CLIP Normalization Layers": "冻结 CLIP 归一化层",
|
||
"Frequency": "频率",
|
||
"(from CivitAI)": "(来自 Civitai)",
|
||
"From (full path)": "从 (输入完整路径)",
|
||
"full": "完整",
|
||
"Full": "完整",
|
||
"full prompts list in a JSON format. value on left side is the frame number": "JSON 格式的完整提示词列表, 左边的值是帧序号",
|
||
"Full res mask": "全分辨率蒙版",
|
||
"Full res mask padding": "全分辨率蒙版的填充预留像素宽度",
|
||
"Fullscreen": "全屏",
|
||
"Fullscreen Mode, maximizes the picture so that it fits into the screen and stretches it to its full width": "全屏模式, 将图片最大化, 使其匹配屏幕, 并拉伸至全尺寸宽度",
|
||
"(Full = slow but pretty; Approx NN and TAESD = fast but low quality; Approx cheap = super fast but terrible otherwise)": "(完整 = 慢但显示效果好; Approx NN 和 TAESD = 快速但低质量; Approx cheap = 超级快但最糟糕)",
|
||
"gallery": "图库",
|
||
"Gallery": "画廊",
|
||
"Gallery height in _absolute_ percent of your screen (not remaining height)": "图像输出栏高度占屏幕的百分比 (非剩余高度)",
|
||
"Gamepad repeat period, in milliseconds": "游戏手柄回报率 (单位: 毫秒)",
|
||
"gamma": "伽马值",
|
||
"Gamma": "伽马值",
|
||
"Gap fill technique": "间隙填充技术",
|
||
"Gather": "生成",
|
||
"Gen": "生成",
|
||
"General": "一般设置",
|
||
"Generate": "生成",
|
||
"Generate 3D inpainted mesh": "生成 3D着色网格",
|
||
"Generate 3D inpainted mesh. (Sloooow, required for generating videos)": "生成优化3D网格 (超慢，用于生成视频)",
|
||
"Generate 4 demo videos with 3D inpainted mesh.": "使用 3D 优化网格生成4个演示视频",
|
||
"Generate a checkpoint at the current training level.": "保存一个位于当前训练进度的模型文件。",
|
||
"Generate a checkpoint at the current training lvel.": "保存一个位于当前训练进度的模型文件。",
|
||
"Generate a .ckpt file when saving during training.": "训练过程中保存的同时生成一个 .ckpt 文件",
|
||
"Generate a .ckpt file when training completes.": "训练完成时生成一个 .ckpt 文件",
|
||
"Generate a .ckpt file when training is canceled.": "手动取消训练时生成一个 .ckpt 文件",
|
||
"Generate all checkpoint preview": "生成所有模型预览图",
|
||
"Generate all checkpoint preview after train finished": "训练完成后生成所有模型的预览图",
|
||
"Generate a mask image.": "生成一个蒙版图像。",
|
||
"Generate Batch": "批量处理",
|
||
"Generate Caption": "生成描述文本",
|
||
"Generate Ckpt": "创建模型",
|
||
"Generate Class Images": "生成类别图像",
|
||
"Generated video": "生成视频",
|
||
"Generate .ebs file.(ebsynth project file)": "生成 .ebs 文件。（Ebsynth 工程文件）",
|
||
"Generate forever": "无限生成",
|
||
"Generate Graph": "生成图表",
|
||
"Generate graphs from training logs showing learning rate and loss averages over the course of training.": "根据训练日志生成图表，展示训练过程中的学习率和损失 (Loss) 平均值。",
|
||
"Generate HeatMap": "生成热力图",
|
||
"Generate human masks": "生成人工蒙版",
|
||
"Generate Info": "生成信息",
|
||
"Generate inputframes": "生成输入帧",
|
||
"Generate layout for batch process": "生成批量处理的图像分布",
|
||
"Generate layout for single image": "生成单张图像的图像分布",
|
||
"Generate me some prompts!": "生成一些提示词",
|
||
"Generate Movie Mode": "视频生成模式",
|
||
"Generate Preview": "生成预览",
|
||
"Generate preview every N frames": "每 N 帧生成预览",
|
||
"Generate preview images every N epochs.": "每 N Epochs 生成一张预览图",
|
||
"Generate preview images every N steps.": "每 N 步生成一次预览图像",
|
||
"Generate preview video during generation? (Preview does not include frame interpolation or upscaling.)": "在生成过程中生成预览视频? (预览视频不包括帧插值或放大)",
|
||
"Generate random prompts from lexica.art (your prompt is used as a search query).": "从 lexica.art 生成随机提示词（你的提示词会被用作搜索查询）",
|
||
"Generate Sample Images": "生成样本图像",
|
||
"Generate sample images using the currently saved diffusers model.": "使用当前保存的 diffusers 模型生成样本图像。",
|
||
"Generate simple 3D mesh": "生成简单 3D网格",
|
||
"Generate simple 3D mesh. (Fast, accurate only with ZoeDepth models and no boost, no custom maps)": "生成简单3D网格 (快速, 仅适用于 ZoeDepth 模型, 无 Boost, 无 Maps)",
|
||
"Generate stereoscopic image(s)": "生成立体图像",
|
||
"Generate video": "生成视频",
|
||
"Generate Video": "生成视频",
|
||
"Generate video from inpainted(!) mesh.": "从深度图生成视频。",
|
||
"Generation": "生成",
|
||
"Generation Info": "生成信息",
|
||
"Generation mode": "生成模式",
|
||
"Generation Parameters": "生成参数",
|
||
"Generation settings:": "生成设置:",
|
||
"Generation TEST!!(Ignore Project directory and use the image and mask specified in the main UI)": "生成测试!!（忽略工程目录，使用用户界面中指定的图像和蒙版）",
|
||
"Gen Options": "生成选项",
|
||
"Get Civitai Model Info by Model Page URL": "从 Civitai 模型页面链接拉取模型信息",
|
||
"*Get depth from uploaded video*": "*从上传的视频中获取深度*",
|
||
"Get javascript logs": "获取 Javascript 日志",
|
||
"Get List": "获取列表",
|
||
"Get mask as alpha of image": "将蒙版用于 alpha 通道图",
|
||
"Get Model Info from Civitai": "从 Civitai 上获取模型信息",
|
||
"Get Model Info from Civitai by URL": "从 Civitai 链接获取模型信息",
|
||
"Get sub directories": "打开子目录文件夹",
|
||
"Get Tags": "获取标签",
|
||
"GFPGAN as Face enhancer": "使用 GFPGAN 增强面部",
|
||
"GFPGAN vis.": "GFPGAN 可见程度",
|
||
"GFPGAN visibility": "GFPGAN 可见程度",
|
||
"github": "GitHub",
|
||
"give it a star on GitHub": "在 Github 上给一个大大的 Star 来支持我们",
|
||
"Glob recursively with input directory pattern": "输入目录模式全局递归",
|
||
"Glow": "辉光",
|
||
"Glow mode": "辉光模式",
|
||
"Gold Pendant": "装饰艺术",
|
||
"gore": "gore (血腥)",
|
||
"Gothic": "哥特",
|
||
"grad": "梯度",
|
||
"Gradient accumulation steps": "梯度累加步数",
|
||
"Gradient Accumulation Steps": "梯度累加步数(Gradient Accumulation Steps)",
|
||
"Gradient Checkpointing": "梯度进度记录(Gradient Checkpointing) - 时间换显存",
|
||
"Gradient Clipping": "梯度 Clip 修剪",
|
||
"Gradient clip value": "梯度 Clip 值",
|
||
"Gradio theme": "Gradio 主题",
|
||
"Gradio theme (requires restart)": "Gradio 主题样式 (需重启)",
|
||
"graffiti": "graffiti (涂鸦)",
|
||
"graphic design": "graphic design (平面设计)",
|
||
"Graph Smoothing Steps": "图表平滑步数",
|
||
"gray": "灰度",
|
||
"Great": "很好的",
|
||
"greg mode": "greg mode (Greg Mike: 美国艺术家)",
|
||
"Grid layout": "网格图布局",
|
||
"Grid margins (px)": "网格图边框 (单位: 像素)",
|
||
"Grid row count; use -1 for autodetect and 0 for it to be same as batch size": "网格图行数； 使用 -1 进行自动检测，使用 0 使其与单批数量相同",
|
||
"GroundingDINO batch progress status": "GroundingDINO 批量处理状态",
|
||
"GroundingDINO Box Threshold": "GroundingDINO 箱体阈值",
|
||
"GroundingDINO Detection Prompt": "GroundingDINO 检测提示词",
|
||
"GroundingDINO Model (Auto download from huggingface)": "GroundingDINO 模型 (自动从 huggingface 下载)",
|
||
"GroundingDINO + Segment Anything can achieve [text prompt]->[object detection]->[segmentation]": "GroundingDINO + Segment Anything 可以实现 [文本提示词]->[对象检测]->[语义分割]",
|
||
"Group/split table by: (when not started with single quote - so only for prompts, not for merge)": "提示词分组方式（非单引号开头时）：",
|
||
"Guess Mode": "无提示词引导模式",
|
||
"Guidance End (T)": "引导终止时机",
|
||
"Guidance Start (T)": "引导介入时机",
|
||
"Guided Images": "引导图像",
|
||
"Guided images schedules": "图像引导参数表",
|
||
"Hair": "头发",
|
||
"HakuImg": "Haku 图像处理",
|
||
"haku_output": "Haku 输出",
|
||
"Half Model": "半精度模型",
|
||
"Hands": "手掌",
|
||
"Hand Size": "手掌尺寸",
|
||
"hard_light": "强光",
|
||
"Has EMA:": "是否有 EMA:",
|
||
"hash": "哈希",
|
||
"has metadata": "有元数据",
|
||
"has user metadata": "内嵌用户元数据",
|
||
"Hat": "帽子",
|
||
"Head Size": "头部尺寸",
|
||
"height": "高度",
|
||
"Height": "高度",
|
||
"Height of the image editor": "图像编辑器高度",
|
||
"Height Resolution": "高度分辨率",
|
||
"Help": "帮助",
|
||
"Help for Jinja2 templates": "Jinja2 模板帮助",
|
||
"[here]": "[这里]",
|
||
"here": "这里",
|
||
"Here, a random number between 1 and 3 words from adjective.txt will be chosen and joined together with the word 'and' instead of the default comma.": "此处，会从 adjective.txt 中选取随机 1 至 3 行，以 'and' (而不是默认的逗号)拼接",
|
||
"Hidden SSID": "隐藏 SSID",
|
||
"Hidden UI tabs": "选择需要隐藏的 UI 标签栏",
|
||
"Hidden UI tabs (requires restart)": "需要隐藏的 UI 选项卡 (需要重启)",
|
||
"Hide": "隐藏",
|
||
"Hide annotator result": "隐藏预处理预览结果",
|
||
"Hide caption": "隐藏文本标注",
|
||
"Hide extensions with tags": "隐藏含有以下标签的扩展",
|
||
"Hide heatmap images": "隐藏热力图图像",
|
||
"Hide networks of unknown versions for model versions": "为以下所选的模型版本隐藏未知版本的模型",
|
||
"Hide Non-API Components (Restarts UI)": "隐藏非 API 组件（需重启 UI）",
|
||
"Hide samplers in user interface": "隐藏用户界面中的采样方法",
|
||
"Hide samplers in user interface (requires restart)": "在用户界面中隐藏采样器 (需重启)",
|
||
"high contrast": "high contrast (高对比度)",
|
||
"Higher levels increases complexity and randomness of generated prompt": "随机等级越高, 生成的提示词越复杂和随机",
|
||
"Highres. fix": "高分辨率修复",
|
||
"Hips": "臀部尺寸",
|
||
"Hires CFG": "高分修复提示词引导系数",
|
||
"Hires checkpoint": "高分模型",
|
||
"hires. fix": "高分辨率修复",
|
||
"hiresfix": "高清修复",
|
||
"Hires. fix": "高分辨率修复 (Hires. fix)",
|
||
"Hires. fix+": "高分修复PLUS",
|
||
"Hires fix: show hires checkpoint and sampler selection": "高分辨率修复: 显示高分模型和采样方法选项",
|
||
"Hires fix: show hires prompt and negative prompt": "高分辨率修复: 显示高分辨率修复的正反提示词输入框",
|
||
"Hires fix: show hires sampler selection": "高分辨率修复: 显示高分采样方法选择栏",
|
||
"Hires. fix+ to do steps optimization": "高分修复 PLUS 来优化迭代步数的话",
|
||
"Hires Negative prompt": "高分修复反向提示词",
|
||
"Hires Prompt": "高分修复正向提示词",
|
||
"Hires sampling method": "高分采样方法",
|
||
"Hires Sampling method": "高分辨率修复采样方法",
|
||
"Hires steps": "高分迭代步数",
|
||
"hires upscaler": "高分辨率修复放大算法",
|
||
"Historical": "Historical (当前帧前的倒数第二帧)",
|
||
"History": "历史记录",
|
||
"Homepage": "主页",
|
||
"horizontal": "水平",
|
||
"Horizontal": "水平",
|
||
"Horizontal Mirroring": "水平镜像",
|
||
"horizontal only": "仅水平方向",
|
||
"horizontal split num": "水平分割数",
|
||
"Horizontal+Vertical Mirroring": "水平+垂直镜像",
|
||
"horror": "horror (恐怖)",
|
||
"how closely the image should conform to the prompt. Lower values produce more creative results. (recommended range 5-15)": "图像应符合提示词的程度。较低的值会产生更具创造性的结果。（建议范围5-15）",
|
||
"how closely the image should conform to the prompt. Lower values produce more creative results. (recommended range 5-15)`": "图像与提示词的相符程度。较低的数值会产生更有创意的结果 (推荐范围: 5-15)",
|
||
"how close to get to the colors of the input frame image/ the amount each frame during a tweening step to use the new images colors": "贴合输入帧图像的颜色的程度 / 在中间计算步骤中使用新图像颜色的每帧数量",
|
||
"How many batches of images to create": "创建多少批量次数的图像",
|
||
"How many classification images to use per instance image.": "每个实例图像使用类别图像的数量。",
|
||
"How many classifier/regularization images to generate at once.": "一次生成多少分类/正则化图像。",
|
||
"How many images to process at once per training step?": "每步训练要处理多少张图像？",
|
||
"How many results to load at once": "一次性加载标签数",
|
||
"How many samples to generate per subject.": "每个主题生成多少样本图像。",
|
||
"How many timesteps to smooth graph data over. A lower value means a more jagged graph with more information, higher value will make things prettier but slightly less accurate.": "平滑图表数据的时间步数。数值越小，图表越参差不齐，但信息量越多；数值越大，图表越漂亮，但准确性稍差。",
|
||
"How many times to improve the generated image iteratively; higher values take longer; very low values can produce bad results": "迭代改进生成的图像的次数；较高的值需要更长的时间；非常低的值会产生不好的结果。",
|
||
"how many times to interpolate the source video. e.g source video fps of 12 and a value of x2 will yield a 24fps interpolated video": "源视频插值次数 (例如, 源视频帧数为12, 插值次数X为2, 则生成一个24帧的插值视频)",
|
||
"How many times to process an image. Each output is used as the input of the next loop. If set to 1, behavior will be as if this script were not used.": "单个图像的处理次数\n每次输出结果都被用作下一个处理的输入\n设置为 1 等同于不启用这个脚本",
|
||
"How much of noise from each octave is added on each iteration. Higher values will make it more straighter and sharper, while lower values will make it rounder and smoother. It is limited by 1.0 as the resulting gain fill the frame completely with noise.": "每次迭代时，每个倍频程的噪声增加量。数值越大越平直、越锐利，数值越小越圆滑。它的最大限制值为 1.0 ，该数值所产生的增益会使整个画面充满噪点。",
|
||
"how much the image should look like the previou one and new image frame init. strength schedule might be better if this is higher, around .75 during the keyfames you want to switch on": "上一图像和现在的图像的相似程度和新图像的初始化强度。设置更高的值对强度调度计划会更好，在你想切换关键帧中，围绕 0.75 设置",
|
||
"How much to blur the mask before processing, in pixels.": "处理前对蒙版进行模糊的强度 (单位: 像素)",
|
||
"How often, in seconds, to flush the pending tensorboard events and summaries to disk.": "刷新间隔，单位为秒；将待处理的 Tensorboard 事件和摘要刷新到硬盘",
|
||
"How strong of a variation to produce. At 0, there will be no effect. At 1, you will get the complete picture with variation seed (except for ancestral samplers, where you will just get something).": "变化强度。设为 0 时，将没有效果\n设为 1 时，你将获得完全产自差异随机种子的图像 (此功能对带有 a 后缀的采样器无效)",
|
||
"How to complete nested wildcard paths": "通配符嵌套路径补全方式",
|
||
"How to complete nested wildcard paths (e.g. \"hair/colours/light/...\")": "通配符嵌套路径补全方式 (例如: \"hair/colors/light/...\")",
|
||
"How to handle input image?": "如何处理输入图像",
|
||
"hue": "色相",
|
||
"huge batch query (TF 2.10, experimental)": "巨量批次查询 (TF 2.10, 实验性)",
|
||
"HuggingFace cache directory, see huggingface_hub guides/manage-cache": "HuggingFace 缓存目录, 查看 huggingface_hub guides/manage-cache",
|
||
"HuggingFace Token": "HuggingFace 访问令牌",
|
||
"humanoid": "humanoid (人形)",
|
||
"humanoid - A random humanoid, males, females, fantasy types, fictional and non-fictional characters. Can add clothing, features and a bunch of other things.": "humanoid - 人形 - 一个随机的人形生物，男性、女性、幻想类型，虚构或非虚构的生物。可以添加服装，特征和其他东西。",
|
||
"Humans Masking": "人工蒙版",
|
||
"hybrid_comp_mask_auto_contrast": "自动对比度合成蒙版",
|
||
"hybrid_comp_mask_blend_alpha_schedule": "合成蒙版透明度混合调度计划",
|
||
"hybrid_comp_mask_type": "合成蒙版类型",
|
||
"Hybrid composite": "混合合成模式",
|
||
"Hybrid motion": "混合运动模式",
|
||
"Hybrid motion may be used with hybrid composite off, to just use video motion.": "混合运动模式可以在关闭混合合成的情况下使用, 针对视频运动",
|
||
"Hybrid Schedules": "合成调度计划",
|
||
"Hybrid Settings": "混合设置",
|
||
"Hybrid Video": "混合视频",
|
||
"Hybrid Video Compositing in 2D/3D Mode": "2D/3D 模式下的混合视频合成",
|
||
"Hybrid Video Schedules": "视频混合调度计划",
|
||
"Hypernetwork": "超网络 (Hypernetwork)",
|
||
"Hypernetwork Learning rate": "超网络学习率",
|
||
"Hypernetworks": "超网络 (Hypernetworks)",
|
||
"Idea and inspiration by xKean.": "这个创意受 xKean 启发。",
|
||
"Idea by redditor jonesaid.": "这个创意来自于 redditor: jonesaid 。",
|
||
"Identifer:BlockID:Elements:Ratio,...,separated by empty line": "识别名:区块ID:组件:权重,...,用空行分隔",
|
||
"If $$ is not provided, then 1$$ is assumed.": "若不提供 $$，默认为 1$$",
|
||
"If a model was extracted or trained with EMA weights, these will be appended separately to the model for use in training later.": "若模型是提取或者和 EMA 权重一同训练，这些权重会单独添加到模型中，供以日后训练使用。",
|
||
"If an image is specified below, it will be used with highest priority.": "如果在下面指定的一张图像，它将以最高优先级使用。",
|
||
"If an image is too large, crop it from the center.": "如果图像太大，则从中心裁剪掉边缘",
|
||
"If blank or set to 0, parameters in the \"txt2img\" tab are used.": "如留空或设置为 0，则使用 \"文生图\" 选项卡中的参数",
|
||
"If checked, the modified area will appear around the edges of the image. If unchecked, the modified area will appear in the center of the image.": "若选中，修改区域将出现在图像的边缘；若不选中，修改区域将显示在图像的中心。",
|
||
"If Deforum crashes due to CN updates, go": "如果 Deforum 由于 ControlNet 版本更新而崩溃，请前往",
|
||
"If EMA weights are saved in a model, these will be extracted instead of the full Unet. Probably not necessary for training or fine-tuning.": "如果模型中保存了 EMA 权重，则提取该权重，而不是完整的 Unet 。\n训练或微调也许没有必要勾选。",
|
||
"If Empty": "如果为空",
|
||
"If enabled, changes the behavior or hybrid_motion to captures motion by comparing the current video frame to the previous rendered image, instead of the previous video frame.": "如启用，将改变混合运动模式的行为，通过比较当前视频帧和上一帧渲染图像来捕获运动，而不是和上一帧视频帧比较。",
|
||
"If enabled, only images will be saved": "启用时, 仅保存图片",
|
||
"if enabled, raw imgs will be deleted after a successful video/ videos (upsacling, interpolation, gif) creation": "如启用, 则在成功创建视频/其他项目 (放大，插值，gif) 后删除原始图像",
|
||
"If loading of the Yolov5_anime model fails, check": "如果 Yolov5_anime 模型加载失败，请查看",
|
||
"If multiple .ebs files are generated, run them all.": "如果生成了多个 .ebs 文件，则需要全部运行。",
|
||
"If non-deforum frames, use the correct number of counting digits. For files like 'bunnies-0000.jpg', you'd use 'bunnies-%04d.jpg'": "如果不是 Deforum 的帧图片, 请使用正确的计数位数。对于像 'bunnies-0000.jpg' 这样的文件, 需使用 'bunnies-%04d.jpg'",
|
||
"(if not: sort by score)": "(如不启用: 按评分排序标签)",
|
||
"(if not: use underscores)": "(如不启用: 使用下划线)",
|
||
"If out-* directory already exists in the Project directory, delete it manually before executing.": "如果out-*目录已经存在于工程目录中，请在执行前手动删除它。",
|
||
"iFrame height": "Photopea 界面高度",
|
||
"If \"Save a copy of image before doing face restoration.\" is enabled, save every image during rolling generation": "如果 \"在进行面部修复前保存图像副本 \" 选项启用，则梯度放大倍数生成时保存每张图像",
|
||
"If setting2prompt width, which width-ratio between both columns (0: minimize setting, 1: 50/50, 6: minimize output gallery column)": "设置文生图, 图生图双栏宽度比 (0: 最小化左侧栏宽度, 1: 双侧栏各占50%宽度, 6: 最小化右侧图像输出栏)",
|
||
"If setting2prompt width, which width-ratio between both columns (0: minimize setting, 1: 50/50, 6: minimize output gallery column)": "设置文生图, 图生图双栏宽度比 (0: 最小化左侧栏宽度, 1: 双侧栏各占50%宽度, 6: 最小化右侧图像输出栏)",
|
||
"If Smart-Step is enabled, the number of iterations for Hires. fix will never be less than this:": "如果启用优化迭代步数，高分辨率修复的迭代步数将永远不会少于本选项设置的数值：",
|
||
"If .srt file is saved, soft-embed the subtitles into the rendered video file": "如果保存了 .srt 文件，则将该字幕文件软嵌入到渲染的视频文件中",
|
||
"If the chosen number of terms is greater than the available terms, then some terms will be duplicated, otherwise chosen terms will be unique. This is useful in the case of wildcards, e.g.": "选的项数多于提供的项数时，有些项会重复，其余情况各选项会保持唯一；\n重复对于通配符很有用，例如：",
|
||
"If the ControlNet Plugin is enabled, which do you use first?": "若 ControlNet 扩展已启用，优先使用的是？",
|
||
"(if the file size is above the limit, or either width or height are above the limit)": "(如果图像文件大小超过限制, 或者其宽度或高度超过限制)",
|
||
"If the number of tokens is more than the number of vectors, some may be skipped.\nLeave the textbox empty to start with zeroed out vectors": "如果 Tokens 数量多于向量数量，一些 Tokens 可能会被跳过\n把输入文本框留空，就可以从清零的向量开始",
|
||
"If the saved image file size is above the limit, or its either width or height are above the limit, save a downscaled copy as JPG": "当图像文件大小或尺寸超过限制，另存一份缩小的副本为 JPG 格式",
|
||
"If this option is selected, many extra frames will be output for the various processes into the hybridframes folder.": "如启用本选项, 额外帧会输出到多种进程的混合帧文件夹",
|
||
"If this values is non-zero, it will be added to seed and used to initialize RNG for noises when using samplers with Eta. You can use this to produce even more variation of images, or you can use this to match images of other software if you know what you are doing.": "如果此值非零，它将被添加到种子中，并在使用Eta的采样器时用于初始化随机噪声。\n你可以用它来产生更多的图像变化，或者用它来模仿其他软件生成的图像，如果你确切知道本选项的功能和你在做什么的话。",
|
||
"If true, instead of sending the flattened image, will send just the currently selected layer.": "如果勾选，将不发送拼合后的图像，而只发送当前选中的图层。",
|
||
"If using a blend mask, this controls the blend amount of the video and render for the composite mask.": "如使用混合蒙版，则控制视频的混合量和合成蒙版的渲染量。",
|
||
"If using autocontrast option, this is the high cutoff for the operation.": "如使用自动对比度选项，这是对比度操作的最高隔断值。",
|
||
"If using autocontrast option, this is the low cutoff for the operation.": "如使用自动对比度选项，这是对比度操作的最低隔断值。",
|
||
"If you are using these templates, please let me know if they are useful.": "如果你在用这些模板，请告诉我它们是否有用",
|
||
"(If you choose 'Shift' you cannot scroll horizontally, 'Alt' can cause a little trouble in firefox)": "(如果选择 'Shift' 则不能控制水平移动, Firefox 浏览器下选择 'Alt' 会出点小问题)",
|
||
"If you do not know the path, try opening the folder in Explorer and copying the path": "如果不知道路径，可以尝试在资源管理器打开文件夹后复制路径",
|
||
"If you do not like the selection, you can modify it manually.": "如果你不喜欢这些选择，你可以手动修改它。",
|
||
"If you have already created a background video in Invert Mask Mode([Ebsynth Utility]->[configuration]->[etc]->[Mask Mode]),": "如果你已经在反相蒙版模式下创建了一个背景视频（[Ebsynth Utility]->[插件配置]->[其他]->[蒙版模式]），",
|
||
"If you have any issues please visit": "如有任何问题欢迎浏览 ",
|
||
"If you have trouble entering the video path manually, you can also use drag and drop.For large videos, please enter the path manually.": "如果你手动输入视频路径嫌麻烦，也可以使用拖放。但是对于大型视频，还是烦请手动输入路径。",
|
||
"If you liked this extension, please": "如果你喜欢本插件，请",
|
||
"(If your wildcard files have a specific custom order, disable this to keep it)": "(若通配符文件有特定的自定义顺序, 请禁用本选项以保留他们)",
|
||
"If you still cannot understand, use default.": "如果你仍然无法理解，请保持默认值。",
|
||
"If you want to": "如果你想",
|
||
"If you want to use the same tagging results the next time you run img2img, rename the file to prompts.txt": "如果想在下次运行图生图时使用同样的标记结果，请将该文件重命名为 prompts.txt",
|
||
"If you want to use Width/Height which are not multiples of 64, please change noise_type to 'Uniform', in Keyframes --> Noise.": "如果你的宽 / 高参数不是 64 的倍数， 请设置 噪声_类型 选项为 'Uniform‘ , 该选项在关键帧 --> 噪声选项卡内",
|
||
"ignore": "无视",
|
||
"Ignore": "忽略",
|
||
"Ignore emphasis": "忽略强调符号",
|
||
"Ignore faces larger than specified size": "忽略大于设定尺寸的脸",
|
||
"Ignore: keep prompt and styles dropdown as it is.": "忽略: 保持提示词和预设样式下拉菜单不变",
|
||
"(ignore last layers of CLIP network; 1 ignores none, 2 ignores one layer)": "(CLIP 网络的忽略层数; 1 不忽略, 2 忽略 1 层)",
|
||
"Ignore mask on ControlNet input image if control type is not inpaint": "若控制类型未设置为 “局部重绘” 时忽略 ControlNet 输入图像上的蒙版",
|
||
"Ignore matching rules when collecting the class dataset. (# of class images must still be configured on the concepts tab).": "收集类别数据集时无视匹配规则。(# 仍须在概念选项卡上配置类别图像的数量)",
|
||
"Ignore selected VAE for stable diffusion checkpoints that have their own .vae.pt next to them": "对于拥有同名 .vae.pt 的模型，忽略外挂 VAE 设置",
|
||
"Ignores step count - uses a number of steps determined by the CFG and resolution": "忽略迭代步数 - 使用由 CFG 和分辨率确定的步数",
|
||
"Ignore whitespace in prompts: All newlines, tabs, and multiple spaces are replaced by a single space": "忽略提示词中的空白：所有换行符、Tab键缩进、多个空格均会被单个空格替换",
|
||
"I know what I am doing.": "高级选项",
|
||
"Illustration": "插画",
|
||
"image": "图像",
|
||
"Image": "图像",
|
||
"Image browser": "图库浏览器",
|
||
"Image Browser": "图库浏览器",
|
||
"Image Browser Settings": "Cozy 图库浏览器设置",
|
||
"Image CFG Scale": "图像引导系数 (CFG)",
|
||
"Image Count": "图片数量",
|
||
"Image creation progress preview mode": "图像生成过程预览模式",
|
||
"Image data view": "图像数据查看",
|
||
"Image Directory": "图像目录",
|
||
"Image File": "图像文件",
|
||
"Image for Auto Segmentation": "用于语义分割的图像",
|
||
"Image for Image Layout": "用于图像分布的图像",
|
||
"Image for img2img": "图生图的图像",
|
||
"Image for inpainting with mask": "用于使用蒙版进行局部重绘的图像",
|
||
"Image for Recognition": "识别图像的分辨率",
|
||
"Image for Segment Anything": "用于分离的图像",
|
||
"Image Generation Library": "图像生成库",
|
||
"Image Generation Scheduler": "图像生成调度器",
|
||
"Image height": "图像高度",
|
||
"Image Init": "图像初始化",
|
||
"image into latent space representation and back. Latent space representation is what stable diffusion is working on during sampling\n(i.e. when the progress bar is between empty and full). For txt2img, VAE is used to create a resulting image after the sampling is finished.\nFor img2img, VAE is used to process user's input image before the sampling, and to create an image after sampling.": " 图像和潜空间表征互相转换。潜空间表征是 Stable Diffusion 在采样过程中的实际操作对象。(即进度条处于 \"空\" 和 \"满\" 之间的状态)。\n对于文生图，VAE 仅用于在采样完成后创建 RGB 图像。\n对于图生图，VAE 用于在采样前把用户输入的图像处理为潜空间表征，并在采样后创建 RGB 图像。",
|
||
"Image Layout": "图像分布",
|
||
"Image layout status": "图像分布状态",
|
||
"Image Parameters": "图像参数",
|
||
"Image path": "图像路径",
|
||
"Image preview height": "预览图高度",
|
||
"Image Processing": "图像处理",
|
||
"(Images are output to ": "(图像将输出到 ",
|
||
"Images directory": "图像目录",
|
||
"Images filename pattern": "图片文件名格式",
|
||
"Images folder": "图像文件夹",
|
||
"Images path": "图像路径",
|
||
"Images to use for keyframe guidance": "用于关键帧引导的图像",
|
||
"Image strength schedule": "图像强度调度计划",
|
||
"Image to 3D": "图转 3D",
|
||
"Image to 3D mesh": "图像转 3D 网格",
|
||
"Image to be masked": "需要叠加蒙版的图像",
|
||
"Image width": "图像宽度",
|
||
"I'm feeling lucky": "手气不错",
|
||
"img2img": "图生图",
|
||
"img2img alternative test": "图生图的替代性测试",
|
||
"img2img CFG": "图生图的提示词引导系数",
|
||
"img2img DDIM discretize": "图生图 DDIM 离散化",
|
||
"img2img denoise strength": "图生图的重绘幅度",
|
||
"img2img-grids": "图生图 (网格)",
|
||
"img2img: height of image editor": "图生图: 图像编辑器高度",
|
||
"img2img history": "图生图历史记录",
|
||
"Img2Img input will be used if no ControlNet input is specified.": "若不指定 ControlNet 输入图，将使用图生图输入的图片",
|
||
"img2img keyframes.": "将关键帧进行图生图。",
|
||
"img2img model to use": "图生图使用的模型",
|
||
"img2img padding": "图生图的预留像素宽度",
|
||
"Img2Img Repeat Count (Loop Back)": "图生图重复次数（回送）",
|
||
"img2img sampler": "图生图的采样方法",
|
||
"img2img Sampling steps": "图生图的采样迭代步数",
|
||
"img2img scale": "图生图的放大倍数",
|
||
"Img2Img Settings:": "图生图设置：",
|
||
"IMG2IMG upscale": "图生图放大",
|
||
"img2img upscaler": "图生图的放大算法",
|
||
"Import": "导入",
|
||
"Import a model from Huggingface.co instead of using a local checkpoint.": "从 Huggingface.co 导入模型而非使用本地的模型文件。",
|
||
"Import a model from Huggingface.co instead of using a local checkpoint. Hub model MUST contain diffusion weights. You can specify a local folder with a cloned model, no HF token will be needed in this case.": "从 Huggingface.co 导入模型，而不是使用本地模型。Huggingface 的模型必须包含 diffusion 权重。可指定带有克隆模型的本地文件夹，这种情况下不需要 HF 令牌。",
|
||
"Important notes:": "重要信息:",
|
||
"Important Notes:": "重要事项：",
|
||
"Important notes and Help": "重要信息与帮助",
|
||
"*Important* notes on Prompts": "关于提示词模式的重要提示",
|
||
"Import Model from Huggingface Hub": "从 Huggingface Hub 载入模型",
|
||
"Import settings from file": "从文件导入设置",
|
||
"impressionism": "impressionism (印象派)",
|
||
"(improves performance when prompt and negative prompt have different lengths; changes seeds)": "(当正向提示词与反向提示词长度不同时启用本选项可以提升性能; 影响随机性)",
|
||
"IN00": "输入层 00",
|
||
"IN01": "输入层 01",
|
||
"IN02": "输入层 02",
|
||
"IN03": "输入层 03",
|
||
"IN04": "输入层 04",
|
||
"IN05": "输入层 05",
|
||
"IN06": "输入层 06",
|
||
"IN07": "输入层 07",
|
||
"IN08": "输入层 08",
|
||
"IN09": "输入层 09",
|
||
"IN10": "输入层 10",
|
||
"IN11": "输入层 11",
|
||
"IN_A_00": "模型 A 输入层 00",
|
||
"IN_A_01": "模型 A 输入层 01",
|
||
"IN_A_02": "模型 A 输入层 02",
|
||
"IN_A_03": "模型 A 输入层 03",
|
||
"IN_A_04": "模型 A 输入层 04",
|
||
"IN_A_05": "模型 A 输入层 05",
|
||
"IN_A_06": "模型 A 输入层 06",
|
||
"IN_A_07": "模型 A 输入层 07",
|
||
"IN_A_08": "模型 A 输入层 08",
|
||
"IN_A_09": "模型 A 输入层 09",
|
||
"IN_A_10": "模型 A 输入层 10",
|
||
"IN_A_11": "模型 A 输入层 11",
|
||
"Inactive text color for image grids": "网格图未激活文本颜色",
|
||
"IN_B_00": "模型 B 输入层 00",
|
||
"IN_B_01": "模型 B 输入层 01",
|
||
"IN_B_02": "模型 B 输入层 02",
|
||
"IN_B_03": "模型 B 输入层 03",
|
||
"IN_B_04": "模型 B 输入层 04",
|
||
"IN_B_05": "模型 B 输入层 05",
|
||
"IN_B_06": "模型 B 输入层 06",
|
||
"IN_B_07": "模型 B 输入层 07",
|
||
"IN_B_08": "模型 B 输入层 08",
|
||
"IN_B_09": "模型 B 输入层 09",
|
||
"IN_B_10": "模型 B 输入层 10",
|
||
"IN_B_11": "模型 B 输入层 11",
|
||
"Include": "包含",
|
||
"Include confident of tags matches in results": "在结果中包含标签的匹配置信度",
|
||
"Include images in sub directories": "显示子目录中的图片",
|
||
"Include ranks of model tags matches in results.": "反推结果包含模型标签匹配等级",
|
||
"Include resource hashes in image metadata (for resource auto-detection on Civitai)": "在图像元数据中嵌入资源哈希值 (用于在 Civitai 上自动检测资源)",
|
||
"Include Sub Grids": "包含次级网格图",
|
||
"Include Sub Images": "包含次级图像",
|
||
"Increment seed after each controlnet batch iteration": "在每次 ControlNet 完成批量迭代后增加种子",
|
||
"Index": "索引",
|
||
"Infer styles from prompts of pasted infotext": "推断粘贴的生成信息文本的提示词中的预设样式",
|
||
"info": "info",
|
||
"Info": "信息",
|
||
"Info and links": "资讯和链接",
|
||
"Info & Help": "信息与帮助",
|
||
"Info, Links and Help": "基本信息与帮助链接",
|
||
"Info object": "全部信息",
|
||
"Information, comment and share @": "信息，评论和分享：",
|
||
"Infotext": "文本信息",
|
||
"In FPS": "输入帧率",
|
||
"In Frame Count": "输入帧数",
|
||
"In \"Interpolate existing pics\" mode, FPS is determined *only* by output FPS slider. Audio will be added if requested even with slow-mo \"enabled\", as it does *nothing* in this mode.": "在‘插入已有图像’模式中，帧率仅由帧率设置滑块决定。音频将会加入，即使在慢动作模式启用情况下，且在此模式下什么都不会做。",
|
||
"Init": "初始化",
|
||
"initial": "初始化",
|
||
"Initial denoising strength": "初始去噪强度",
|
||
"Initial generated image number": "初始生成的图像编号",
|
||
"Initialization text": "初始化文本",
|
||
"Initiates extraction of video frames from your video_init_path to the inputframes folder. You only need to do this once and then you can change it to False and re-render": "从视频初始路径提取视频帧到输入帧文件夹。你只需要操作一次后关闭本选项，再重新渲染",
|
||
"Init image": "初始化图像",
|
||
"Init tab's strength slider should be greater than 0. Recommended value (.65 - .80).": "初始化选项卡的强度滑块应设置大于0，推荐设置为 (0.65 - 0.80) 。",
|
||
"Init Video": "初始化视频",
|
||
"In Keyframes tab, you can also set": "在关键帧选项卡, 可以设置",
|
||
"in <>, like <apple>, <hair>": "<>,比如 <apple>, <hair>",
|
||
"(in megapixels)": "(单位: 百万像素)",
|
||
"(in milliseconds)": "(单位: 毫秒)",
|
||
"Inner Fit (Scale to Fit)": "贴合内边 (放大以贴合)",
|
||
"InOutPaint": "向内向外绘制",
|
||
"inpaint": "局部重绘",
|
||
"Inpaint": "局部重绘",
|
||
"Inpaint area": "重绘区域",
|
||
"Inpaint Area(Override img2img Inpaint area)": "重绘区域（覆盖图生图的重绘区域）",
|
||
"Inpaint at full resolution 2nd": "全分辨率局部重绘",
|
||
"Inpaint at full resolution 3rd": "全分辨率局部重绘",
|
||
"Inpaint at full resolution 4th": "全分辨率局部重绘",
|
||
"Inpaint at full resolution 5th": "全分辨率局部重绘",
|
||
"Inpaint at full resolution padding, pixels 2nd": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 3rd": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 4th": "预留像素",
|
||
"Inpaint at full resolution padding, pixels 5th": "预留像素",
|
||
"Inpaint batch mask directory (required for inpaint batch processing only)": "批量重绘蒙版目录 (仅限批量重绘使用)",
|
||
"Inpaint denoising strength": "局部重绘幅度",
|
||
"Inpaint denoising strength 10th": "局部重绘幅度",
|
||
"Inpaint denoising strength 2nd": "局部重绘幅度",
|
||
"Inpaint denoising strength 3rd": "局部重绘幅度",
|
||
"Inpaint denoising strength 4th": "局部重绘幅度",
|
||
"Inpaint denoising strength 5th": "局部重绘幅度",
|
||
"Inpaint denoising strength 6th": "局部重绘幅度",
|
||
"Inpaint denoising strength 7th": "局部重绘幅度",
|
||
"Inpaint denoising strength 8th": "局部重绘幅度",
|
||
"Inpaint denoising strength 9th": "局部重绘幅度",
|
||
"inpaint_global_harmonious": "Inpaint_Global_Harmonious (重绘 - 全局融合算法)",
|
||
"inpaint height": "重绘高度",
|
||
"Inpaint+ Height": "重绘+ 高度",
|
||
"inpaint height 10th": "重绘高度",
|
||
"inpaint height 2nd": "重绘高度",
|
||
"inpaint height 3rd": "重绘高度",
|
||
"inpaint height 4th": "重绘高度",
|
||
"inpaint height 5th": "重绘高度",
|
||
"inpaint height 6th": "重绘高度",
|
||
"inpaint height 7th": "重绘高度",
|
||
"inpaint height 8th": "重绘高度",
|
||
"inpaint height 9th": "重绘高度",
|
||
"inpainting": "重绘",
|
||
"Inpainting": "重绘",
|
||
"Inpainting conditioning mask strength": "局部重绘时图像调节的蒙版屏蔽强度",
|
||
"Inpaint mask blur": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 10th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 2nd": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 3rd": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 4th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 5th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 6th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 7th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 8th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask blur 9th": "重绘蒙版边缘模糊度",
|
||
"Inpaint mask brush color": "重绘蒙版画笔颜色",
|
||
"Inpaint masked": "重绘蒙版内容",
|
||
"Inpaint+ mode guide": "重绘+ 模式指南",
|
||
"Inpaint not masked": "重绘非蒙版内容",
|
||
"inpaint_only": "inpaint_only (仅局部重绘)",
|
||
"inpaint_only+lama": "inpaint_only+lama (仅局部重绘 + 大型蒙版)",
|
||
"Inpaint only masked": "仅重绘蒙版内容",
|
||
"Inpaint only masked 10th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 2nd": "仅重绘蒙版内容",
|
||
"Inpaint only masked 3rd": "仅重绘蒙版内容",
|
||
"Inpaint only masked 4th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 5th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 7th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 8th": "仅重绘蒙版内容",
|
||
"Inpaint only masked 9th": "仅重绘蒙版内容",
|
||
"Inpaint only masked padding, pixels": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 10th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 2nd": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 3rd": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 4th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 5th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 6th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 7th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 8th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint only masked padding, pixels 9th": "仅重绘蒙版区域边缘预留像素",
|
||
"Inpaint selection": "重绘选择区域",
|
||
"inpaint sketch": "涂鸦重绘",
|
||
"Inpaint sketch": "涂鸦重绘",
|
||
"Inpaint sketch initial brush color": "涂鸦重绘初始画笔颜色",
|
||
"Inpaint upload": "上传重绘蒙版",
|
||
"inpaint width": "重绘宽度",
|
||
"Inpaint+ Width": "重绘+ 宽度",
|
||
"inpaint width 10th": "重绘宽度",
|
||
"inpaint width 2nd": "重绘宽度",
|
||
"inpaint width 3rd": "重绘宽度",
|
||
"inpaint width 4th": "重绘宽度",
|
||
"inpaint width 5th": "重绘宽度",
|
||
"inpaint width 6th": "重绘宽度",
|
||
"inpaint width 7th": "重绘宽度",
|
||
"inpaint width 8th": "重绘宽度",
|
||
"inpaint width 9th": "重绘宽度",
|
||
"(in pixels)": "(单位: 像素)",
|
||
"Input": "输入",
|
||
"Input audio": "输入音频",
|
||
"Input directory": "输入目录",
|
||
"Input Directory": "输入目录",
|
||
"Input directory - See also settings tab.": "输入目录 - 也请查看设置选项",
|
||
"Input Folder": "输入文件夹",
|
||
"Input Image": "输入图像",
|
||
"Input images directory": "输入图像目录",
|
||
"Input Mesh (.ply | .obj)": "输入网格文件 (.ply | .obj)",
|
||
"Input <= Output": "输出图像 发送到 输入图像",
|
||
"Input path": "输入目录",
|
||
"Input Video": "输入视频",
|
||
"In queue...": "排队中……",
|
||
"In Res": "输入分辨率",
|
||
"(in sampling steps - show new live preview image every N sampling steps; -1 = only show after completion of batch)": "(每N个采样步骤更新一次实时预览图像; 设置为-1以在每批次完成后显示)",
|
||
"Insert after": "后插",
|
||
"Insert before": "前插",
|
||
"Inspect": "检查",
|
||
"install": "安装",
|
||
"Install": "安装",
|
||
"installation": "installation (装置艺术)",
|
||
"installed": "已安装",
|
||
"Installed": "已安装",
|
||
"Install from URL": "从网址安装",
|
||
"Installing...": "正在安装...",
|
||
"Instance prompt": "提示词实例",
|
||
"Instance Prompt": "提示词实例",
|
||
"Instance prompt(Optional)": "提示词实例 (可选)",
|
||
"Instance Token": "词元实例",
|
||
"Instead it will pick up all files in the \\upscale_me\\ folder and upscale them with below settings.": "相对应的会用 \\upscale_me\\ 文件夹中的文件按照下列设置对它们进行放大。",
|
||
"Instead of generating random prompts from a template, combinatorial generation produces every possible prompt from the given string.\nThe prompt 'I {love|hate} {New York|Chicago} in {June|July|August}' will produce 12 variants in total.\n\nThe value of the 'Seed' field is only used for the first image. To change this, look for 'Fixed seed' in the 'Advanced options' section.": "组合生成并非从模板生成随机提示词，而是从给定字符串中生成每个可能出现的提示词。\n以下 'I {love|hate} {New York|Chicago} in {June|July|August}' 将共生成12种可能的提示词组合。\n\n“种子”字段的值仅用于第一张图像。若要更改此设置，请在“高级选项”部分中查找“固定种子”。",
|
||
"instructs the handling of pixels outside the field of view as they come into the scene.": "选择进入场景的视场外像素的处理算法",
|
||
"instructs the run to start from a specified point": "指示运行从指定点开始",
|
||
"integrations": "集成功能",
|
||
"interactive splines and Bezier curves": "交互式样条曲线和贝赛尔曲线",
|
||
"Intermediate files path": "临时文件路径",
|
||
"Intermediate results may look better than the end results. /!\\ Intermediate results are cleaned after each run, save them elsewhere if you want to keep them.": "中间的结果可能比最终结果看起来更好。提示: 中间的结果在每次运行后都会被清理，如果你想保留它们，就把它们保存在其他地方",
|
||
"internal order": "内部排序",
|
||
"Interpolate existing Video/ Images": "插值已有的视频/图像",
|
||
"*Interpolate Pics*": "*插值图像*",
|
||
"Interpolate upscaled images, if available": "插值放大图像 (如可用)",
|
||
"*Interpolate Video*": "*插值视频*",
|
||
"Interpolation": "插值",
|
||
"interpolation method": "插值模式",
|
||
"Interpolation method": "插值算法",
|
||
"Interpolation Method": "融合算法",
|
||
"Interprocess communication strategy": "进程间通讯方式",
|
||
"Interp X": "插值次数 X",
|
||
"Interrogate": "反推",
|
||
"Interrogate\nCLIP": "CLIP\n反推",
|
||
"Interrogate\nDeepBooru": "DeepBooru\n反推",
|
||
"Interrogate image": "反推图像",
|
||
"Interrogate: keep models in VRAM": "反推：将模型保留在显存中",
|
||
"Interrogate: num_beams for BLIP": "反推：BLIP 集束数量",
|
||
"Interrogate Options": "反推设置",
|
||
"Interrogate Result": "反推结果",
|
||
"Interrogate Selected Image": "反推所选图片",
|
||
"Interrogator": "反推",
|
||
"Interrogators": "反推算法",
|
||
"Interrogator Settings": "反推器设置",
|
||
"interrupt": "中止",
|
||
"Interrupt": "中止",
|
||
"Intervals": "间隔",
|
||
"In the filename, '%09d' represents the 9 counting numbers, For '20230124234916_000000001.png', use '20230124234916_%09d.png'": "在文件名中, '%09d' 代表9个计数数字, 对于 '20230124234916_000000001.png' , 使用 '20230124234916_%09d.png'",
|
||
"In the main tab, set the subject to humanoids": "在主菜单标签页, 设置主题为 humanoids (人形)",
|
||
"In the prefix prompt field then add for example: Art by artistname, 2 people": "然后在前缀提示词段中添加示例: Art by artistname, 2 people",
|
||
"In this case, a random number of artists between 1 and 3 is chosen.": "在此示例中，会从中随机选 1 至 3 个艺术家",
|
||
"In this case, artist1 will be chosen twice as often as artist2.": "这种情况下，artist1被选中的概率就会是artist2的两倍",
|
||
"(in tokens - for texts shorter than specified, if they don't fit into 75 token limit, move them to the next 75 token chunk)": "(Token 中短于指定长度的提示词, 如果它们不符合 75 Tokens 的上限, 则将他们移至下一个 75 Tokens 组中)",
|
||
"Inversion steps": "反转步数 (Steps)",
|
||
"Invert": "反相",
|
||
"Invert (black=near, white=far)": "反转（黑=近，白=远）",
|
||
"Invert colors": "反转颜色",
|
||
"Invert colors if your image has white background.": "对于白色背景图片请开启颜色反转。",
|
||
"Invert DepthMap": "反转深度图",
|
||
"Invert DepthMap (black=near, white=far)": "反转深度图（黑色=近，白色=远）",
|
||
"invert (from white bg & black line)": "invert (白底黑线反色)",
|
||
"Invert Input Color": "反转输入颜色",
|
||
"Invert mask": "反转蒙版",
|
||
"Invert selection": "反向选择",
|
||
"Inverts the composite mask.": "对合成蒙版进行反相处理",
|
||
"is also a good option, it makes compact math formulae for Deforum keyframes by selecting various waveforms.": " 也是一个很好的选择，它可以通过选择各种波形来为 Deforum 关键帧生成严谨的数学公式.",
|
||
"is a neural network that transforms a standard": " 是一种神经网络，可将标准的 ",
|
||
"is equivalent to": "等同于",
|
||
"is experimental functions and NO PROOF of effectiveness.": " 为实验性功能，不保证有效性。",
|
||
"is set,": "已经设置数值，",
|
||
"is the": " 是 ",
|
||
"is the current frame number.": " 是当前帧数序号",
|
||
"is the length of the video, in frames.": " 是视频的整体长度，用帧数来统计",
|
||
"iter": "迭代",
|
||
"Iterate seed every line": "每行输入都换一个随机种子",
|
||
"Iterations": "迭代",
|
||
"It is automatically set to No when adding, and it needs to be changed again": "添加后自动设置为 No，若有需要请手动调整",
|
||
"It takes time, just wait. Check console log for detail": "检查需要一段时间，请耐心等待。检查控制台日志以查看详情。",
|
||
"It will then recognize the body type and not generate it. It also recognizes the keyword wearing, and will not generate an outfit.": "然后，它将识别体型来避免生成对应体型。它同样能识别关键词 \"穿着\"，避免生成服装。",
|
||
"It will translate prompt from your native language into English. So, you can write prompt with your native language.": "这会将您输入的提示词翻译为英文。因此，您可以直接用母语输入提示词。",
|
||
"I want to preview GroundingDINO detection result and select the boxes I want.": "我想预览 GroundingDINO 的结果并选择我想要的箱体。",
|
||
"Javascript logs": "Javascript 日志",
|
||
"JavaScript selection method": "前端选择样式",
|
||
"Jinja2 documentation.": "Jinja2 文档",
|
||
"Jinja2 templates": "Jinja2 模板",
|
||
"Jinja2 templates are an expressive alternative to the standard syntax. See the Help section below for instructions.": "Jinja2 模板是标准语法富有表现力的一种替代品，相关说明参见下方帮助栏",
|
||
"Jinja2 templates are based on the Jinja2 template engine. For more information see the": "Jinja2 模板基于 Jinja2 模板引擎，更多信息参见 ",
|
||
"Jinja2 templates is an experimental feature for advanced template generation. It is not recommended for general use unless you are comfortable with writing scripts.": "Jinja2 模板是一个用于高级模板生成的实验特性。如果不熟悉编写脚本，正常使用时不推荐启用",
|
||
"Jitter step:": "抖动步数: ",
|
||
"Jitter the seeds of sub-generations when doing a rolling generation (Still deterministic)": "在进行梯度放大倍数生成时, 对子代生成的随机种子进行抖动 (图像依旧可复现)",
|
||
"Join the": "加入",
|
||
"- Joints and Limbs": "- 关节和四肢",
|
||
"json path": "json 路径",
|
||
"JSON Validator": "JSON 校验器中检查",
|
||
"Judge": "鉴定",
|
||
"Just resize": "仅调整大小",
|
||
"Just Resize": "仅调整大小",
|
||
"Just resize (latent upscale)": "调整大小 (潜空间放大)",
|
||
"Kana Name": "网名",
|
||
"Keep -1 for seeds": "保持种子随机",
|
||
"Keep at 1 for normal behavior.\nSet to different values to compound that many prompts together. My suggestion is to try 2 first.": "设置为 1 保持正常行为。\n设置其他数值来混合更多提示词。我的建议是先尝试设置为 2 。",
|
||
"Keep blank if you don't have mask": "如果没有遮罩, 请保持空白",
|
||
"Keep Imgs": "保留原图",
|
||
"Keep input image size": "保持输入图像大小",
|
||
"Keep interpolated images on disk": "保留插值图像在硬盘",
|
||
"Keep models in VRAM": "将模型保留在显存中",
|
||
"Keep occlusion edges": "保持边缘封闭",
|
||
"Keep original size": "保持原始尺寸",
|
||
"Keep resolution": "保持分辨率不变",
|
||
"Keep settings persistent upon relaunch of webui": "重启 webui 时保持持久性设置",
|
||
"Keep temp images": "保留临时图像",
|
||
"Keep the normalization layers of CLIP frozen during training. Advanced usage, may increase model performance and editability.": "训练过程中冻结 CLIP 的归一化层。可提高模型性能和可编辑性的高级用法。",
|
||
"Keep the Ratio": "保持图像比例",
|
||
"keep whatever was there originally": "保留原来的图像，不进行预处理",
|
||
"Kept tag, ..": "保留标签, ..",
|
||
"Kernel schedule": "Kernel 调度计划",
|
||
"kernel size": "画笔大小",
|
||
"key for Fullscreen mode,": "键进入全屏模式，",
|
||
"Keyframes": "关键帧",
|
||
"Keyframes: animation settings (animation mode, max frames, border)": "关键帧：动画设置（动画模式，最大帧数，边界）",
|
||
"Keyframes are output to ": "关键帧已输出到 ",
|
||
"Keyframes: coherence (color coherence & cadence)": "关键帧：一致性（颜色一致性和间隔）",
|
||
"Keyframes: depth warping": "关键帧：深度变形",
|
||
"Keyframes: generation settings (noise, strength, contrast, scale).": "关键帧：通用设置（噪点，强度，对比度，缩放）",
|
||
"Keyframes: motion parameters for 2D and 3D (angle, zoom, translation, rotation, perspective flip).": "关键帧：2D 和 3D 的运动参数（角度，缩放，变换，旋转，透视翻转）",
|
||
"key_max_gap: ": "最大关键帧间隔：",
|
||
"key_min_gap: ": "最小关键帧间隔：",
|
||
"keys : ": "关键帧：",
|
||
"key_th: ": "增量帧边缘阈值：",
|
||
"Keywords": "关键词",
|
||
"kmeans": "聚类 (kmeans)",
|
||
"kmeans with dithering": "聚类 (kmeans) 且 抖动 (dithering)",
|
||
"Kohya module:": "Kohya 模块类型:",
|
||
"Label": "标记",
|
||
"LAB is a more linear approach to mimic human perception of color space - a good default setting for most users.": "LAB 是一种更为线性的方法，可以模拟人类对色彩空间的感知——这是大多数用户的一个很好的默认设置。",
|
||
"ladder": "阶梯式",
|
||
"landscape": "landscape (景观)",
|
||
"landscape - A landscape or a landscape with a building.": "landscape - 景观 - 一般景观或有建筑的景观。",
|
||
"Last Image": "上一张图片",
|
||
"Last message": "最后输出信息",
|
||
"Last Name": "姓",
|
||
"Latent Mirroring": "Latent Mirroring (镜像潜空间)",
|
||
"Latent Mirror mode": "潜空间镜像应用模式",
|
||
"Latent Mirror style": "潜空间镜像方式",
|
||
"latent noise": "潜空间噪声",
|
||
"latent nothing": "空白潜空间",
|
||
"Latent tile batch size": "潜空间分块单批数量",
|
||
"Latent tile height": "潜空间分块高度",
|
||
"Latent tile overlap": "潜空间分块重叠",
|
||
"Latent tile width": "潜空间分块宽度",
|
||
"Latent Upscale": "Latent Upscale (潜空间放大)",
|
||
"latest": "最新",
|
||
"Latitude": "纬度",
|
||
"Layer1": "图层 1",
|
||
"Layer1 mask blur": "图层 1 蒙版模糊度",
|
||
"Layer1 mask strength": "图层 1 蒙版强度",
|
||
"Layer1 opacity": "图层 1 透明度",
|
||
"Layer2": "图层 2",
|
||
"Layer2 mask blur": "图层 2 蒙版模糊度",
|
||
"Layer2 mask strength": "图层 2 蒙版强度",
|
||
"Layer2 opacity": "图层 2 透明度",
|
||
"Layer3": "图层 3",
|
||
"Layer3 mask blur": "图层 3 蒙版模糊度",
|
||
"Layer3 mask strength": "图层 3 蒙版强度",
|
||
"Layer3 opacity": "图层 3 透明度",
|
||
"Layer4": "图层 4",
|
||
"Layer4 mask blur": "图层 4 蒙版模糊度",
|
||
"Layer4 mask strength": "图层 4 蒙版强度",
|
||
"Layer4 opacity": "图层 4 透明度",
|
||
"Layer5": "图层 5",
|
||
"Layer5 mask blur": "图层 5 蒙版模糊度",
|
||
"Layer5 mask strength": "图层 5 蒙版强度",
|
||
"Layer5 opacity": "图层 5 透明度",
|
||
"Layers": "图层",
|
||
"Lazy": "保守",
|
||
"LDSR processing steps. Lower = faster": "LDSR 处理步数。越少越快",
|
||
"Learning rate": "学习率",
|
||
"Learning Rate": "学习率 (LR)",
|
||
"Learning Rate Scheduler": "学习率调度器",
|
||
"Learning Rate Warmup Steps": "学习率预热步数",
|
||
"Leave blank to save images to the default path.": "留空以将图像保存到默认路径",
|
||
"Leave blank to save images to the same path.": "留空以将图像保存到相同路径",
|
||
"Leave blank to use base model VAE.": "留空以使用底模 VAE",
|
||
"Leave blank to use instance prompt. Optionally use [filewords] to base sample captions on instance images.": "留空以使用提示词实例。也可选用 [filewords] 来使用实例图像的描述文本进行样本图像生成。",
|
||
"Leave empty for auto": "留空时自动生成",
|
||
"Leave empty for default main branch": "留空以使用默认分支",
|
||
"Leave empty for using generation negative prompt": "留空以使用图片生成反向提示词",
|
||
"Leave empty for using generation prompt": "留空以使用图片生成提示词",
|
||
"Leave empty to use img2img batch controlnet input directory": "留空以使用图生图批量处理 ControlNet 输入目录",
|
||
"Leave empty to use input directory": "留空以使用普通输入目录",
|
||
"Leave empty to use the --listen address of the ComfyUI server": "留空以使用 ComfyUI 服务器的 --listen 监听地址",
|
||
"Leave empty to use the same name as model and put results into models/Unet-onnx directory": "留空以使用与 checkpoint 模型相同的名称, 并将转换出的模型放入 models/Unet-onnx 目录",
|
||
"Leave empty to use the same name as onnx and put results into models/Unet-trt directory": "留空以使用与 onnx 模型相同的名称, 并将转换出的模型放入 models/Unet-trt 目录",
|
||
"Leave the prompt field empty": "提示词段留空",
|
||
"Leave this alone unless you know what you are doing": "不明白这个选项的意思的话最好不要动",
|
||
"left": "左",
|
||
"Left click the image to add one positive point (black dot). Right click the image to add one negative point (red dot). Left click the point to remove it.": "左键点击图像添加一个黑色的正向标记点（想提取的部分）。右键点击图像添加一个红色的反向标记点（不想提取的部分）。左键再次点击可以删除标记点。",
|
||
"left-right": "左 - 右",
|
||
"Legacy colormatch": "经典颜色匹配",
|
||
"Legacy hash": "旧哈希值",
|
||
"Leg Length": "腿部长度",
|
||
"Len": "长度",
|
||
"Length": "长度",
|
||
"Lens distortion (Fisheye)": "镜头失真 (鱼眼)",
|
||
"Lerp": "线性插值",
|
||
"lets you only match every N frames": " 可以仅在每渲染 N 帧校正一次颜色",
|
||
"(lets you override the noise schedule for k-diffusion samplers; choosing Automatic disables the three parameters below)": "(覆盖 k-diffusion 采样方法的噪声调度器; 选择自动会禁用以下的三个参数)",
|
||
"libraries": "库",
|
||
"Licenses": "许可协议",
|
||
"light": "light (照明艺术)",
|
||
"lighten": "变亮",
|
||
"👍 Like": "👍 喜欢",
|
||
"Liked images": "喜欢的图片",
|
||
"like here": "链接",
|
||
"👍 Likes": "👍 喜欢的",
|
||
"Limb Width": "四肢宽度",
|
||
"Limit Jinja prompts: Limit the number of prompts to batch_count * batch_size. The default is to generate batch_count * batch_size * number of prompts generated by Jinja": "限制 Jinja 提示词数量：限制提示词数量为 总批次数 * 单批数量 (batch count * batch size)。默认情况下，生成数量为 = 总批次数 * 单批数量 * Jinja 生成的提示词数量",
|
||
"Limit the maximum number of prompts generated. 0 (default) will generate all images. Useful to prevent an unexpected combinatorial explosion.": "限制生成的最大提示词数。 0（默认）将生成所有图像。 有助于防止设置不当造成组合总数过多。",
|
||
"Linear": "线性",
|
||
"linear_burn": "线性加深",
|
||
"linear_dodge": "线性减淡",
|
||
"linear_light": "线性光",
|
||
"Lineart": "Lineart (线稿)",
|
||
"lineart_anime": "lineart_anime (动漫线稿提取)",
|
||
"lineart_anime_denoise": "lineart_anime_denoise (动漫线稿提取 - 去噪)",
|
||
"lineart_coarse": "lineart_coarse (粗略线稿提取)",
|
||
"lineart_realistic": "lineart_realistic (写实线稿提取)",
|
||
"lineart_standard": "lineart_standard (标准线稿提取 - 白底黑线)",
|
||
"lineart_standard (form white bg & black line)": "lineart_standard (标准线稿提取 - 白底黑线)",
|
||
"lineart_standard (from white bg & black line)": "lineart_standard (标准线稿提取 - 白底黑线反色)",
|
||
"line drawing": "line drawing (线描)",
|
||
"Link to DeepL": "Deepl 在线翻译链接",
|
||
"Link to online results": "链接到在线结果",
|
||
"List loaded embeddings": "获取嵌入式模型列表",
|
||
"List of active tabs (separated by commas). Available options are txt2img, img2img, txt2img-grids, img2img-grids, Extras, Favorites, Others, All, Maintenance. Custom folders are also supported by specifying their path.": "激活的图像保存目录标签 (用逗号分隔). 可用的标签有, 文生图(txt2img),图生图(img2img), 文生图-网格(txt2img-grids), 图生图-网格(img2img-grids), 后期处理(Extras), 收藏夹(Favorites), 其他(Others), 全部(All), 维护(Maintenance)。 也可以通过指定文件目录来自定义目录标签.",
|
||
"List of active tabs (separated by commas). Available options are txt2img, img2img, txt2img-grids, img2img-grids, Extras, Favorites, Others. Custom folders are also supported by specifying their path.": "激活的图像保存目录标签 (用逗号分隔). 可用的标签有, 文生图(txt2img),图生图(img2img), 文生图-网格(txt2img-grids), 图生图-网格(img2img-grids), 后期处理(Extras), 收藏夹(Favorites), 其他(Others). 也可以通过指定文件目录来自定义目录标签.",
|
||
"List of model names (with file extension) or their hashes to use as black/whitelist, separated by commas.": "用于黑/白名单的模型名称（带文件扩展名）或其哈希值的列表，用逗号分隔",
|
||
"List of prompt inputs": "提示词输入列表",
|
||
"List of setting names, separated by commas, for settings that should go to the quick access bar at the top, rather than the usual setting tab. See modules/shared.py for setting names. Requires restarting to apply.": "设置项名称的列表，以英文逗号分隔，该设置会移动到顶部的快速访问栏，而不是默认的设置选项卡。有关设置名称，请参阅 modules/shared.py。(需保存设置并重启)",
|
||
"Literals": "字面量",
|
||
"Live preview display period": "实时预览显示周期",
|
||
"Live preview file format": "实时预览文件格式",
|
||
"Live preview method": "实时预览模式",
|
||
"Live previews": "实时过程预览",
|
||
"Live preview subject": "实时预览主体",
|
||
"⚙️ Load": "⚙️ 加载",
|
||
"Load": "加载",
|
||
"Load All Settings": "载入所有设置",
|
||
"Load an image.": "加载一张图片",
|
||
"Load BG": "加载背景图",
|
||
"Load caption from filename if no text file exists": "当文本文件不存在时，从文件名中加载描述",
|
||
"Load ComfyUI iframes through a reverse proxy (requires reload UI. Needs --api. Default is on if webui is remote)": "通过反向代理加载 ComfyUI 嵌入页面 (需要重载前端; 需要 --api; 对于可远程访问的 webui 默认启用)",
|
||
"Load data from file": "从文件加载数据",
|
||
"Loaded Model:": "加载的模型",
|
||
"Load from:": "加载扩展列表",
|
||
"Load from JSON": "加载 JSON",
|
||
"Load from subdirectories": "从子目录中加载",
|
||
"load_history": "加载历史记录",
|
||
"Loading...": "载入中...",
|
||
"Load model": "加载模型",
|
||
"Load models/files in hidden directories": "加载隐藏目录中的模型/文件",
|
||
"Load models using stream loading method": "使用流式模型加载方法",
|
||
"Load Only": "仅加载",
|
||
"Load Params": "载入参数",
|
||
"Load preset": "加载预设",
|
||
"Load Preset": "加载预设",
|
||
"Load results": "加载结果",
|
||
"Load Romdom preset": "随机加载预设",
|
||
"Load & Save": "加载 & 保存",
|
||
"Load Scene": "加载场景",
|
||
"Load Settings": "载入设定",
|
||
"Load settings from:": "配置加载自: ",
|
||
"Load trigger words from Dreambooth model": "从 Dreambooth 模型中加载触发词",
|
||
"Load Video Settings": "载入视频设置",
|
||
"Local": "本地",
|
||
"Local directory name": "本地目录名",
|
||
"localization": "本地化",
|
||
"Localization": "本地化",
|
||
"Localization file (Please leave `User interface` - `Localization` as None)": "本地化文件 (请将\"用户界面\" - “本地化翻译”选项设置为“无”)",
|
||
"Localization (requires restart)": "本地化翻译（需要重启）",
|
||
"Location": "FFmpeg 所在位置",
|
||
"Log": "日志",
|
||
"Log directory": "日志目录",
|
||
"Logo": "图标",
|
||
"Longitude": "经度",
|
||
"Loop": "循环",
|
||
"Loopback": "回送",
|
||
"[Loopback] Automatically send generated images to this ControlNet unit": "[回送] 自动将生成后的图像发送到此 ControlNet 单元",
|
||
"LoopBack mode": "回送模式",
|
||
"Loopback option": "回送选项",
|
||
"Loopback source": "回送源",
|
||
"Looping recommendations:": "循环设置建议：",
|
||
"Loops": "回送次数",
|
||
"LoRA Block Weight": "LoRA Block Weight (LoRA 区块权重配置)",
|
||
"LoRA directory (if not default)": "LoRA 模型目录 (如非默认)",
|
||
"LoRA in negative textencoder": "反向提示词中 LoRA 文本编码器权重",
|
||
"LoRA in negative U-net": "反向提示词中 LoRA 的 U-net 权重",
|
||
"LoRA model name filter": "按名称过滤低秩微调 (LoRA) 模型",
|
||
"Lora multiplier": "Lora 强度倍率",
|
||
"Lora/Networks: use old method that takes longer when you have multiple Loras active and produces same results as kohya-ss/sd-webui-additional-networks extension": "对于 Lora 等模型: 使用旧的加载方法，当多个 Lora 激活时需要更长的时间，并且可以生成与 kohya-ss/sd-webui-additional-networks 扩展相同的结果",
|
||
"LoRA prompt helper": "LoRA 提示词助手",
|
||
"Lo RA Prompt Helper": "LoRA 提示词助手",
|
||
"LoRA use buggy requires grad": "LoRA 启用错误梯度需求",
|
||
"Lora: use old method that takes longer when you have multiple Loras active and produces same results as kohya-ss/sd-webui-additional-networks extension": "Lora: 使用旧的加载方法，当多个 Lora 激活时需要更长的时间，并且可以生成与 kohya-ss/sd-webui-additional-networks 扩展相同的结果",
|
||
"low contrast": "low contrast (低对比度)",
|
||
"Lower Leg": "小腿长度",
|
||
"Low fps": "低帧率",
|
||
"(Low values = visible seam)": "(数值越低=接缝越明显)",
|
||
"Low VRAM": "低显存模式",
|
||
"Low VRAM (8GB or below)": "低显存 (8 GB 以下) 模式",
|
||
"luminism": "luminism (光色派)",
|
||
"LyCORIS directory (if not default)": "LyCORIS 模型目录 (如非默认)",
|
||
"M00": "中间层",
|
||
"M_A_00": "模型 A 中间层",
|
||
"Made by": "制作方: ",
|
||
"Made by deforum.github.io, port for AUTOMATIC1111's webui maintained by kabachuha": "由 deforum.github.io 制作，AUTOMATIC1111 的 webui 移植版本由 kabachuha 维护",
|
||
"Magenta | Green": "洋红色 | 绿色",
|
||
"magical realism": "magical realism (魔幻现实主义)",
|
||
"Magic prompt": "魔法提示词",
|
||
"Magic Prompt adds interesting modifiers to your prompt for a little bit of extra spice.\nThe first time you use it, the MagicPrompt model is downloaded so be patient.\nIf you're running low on VRAM, you might get a CUDA error.": "魔法提示词在提示词中加入有趣的修饰，额外增添趣味\n首次使用时会下载 MagicPrompt 模型，请耐心等待\n在低显存情况下可能会导致 CUDA 报错",
|
||
"Magic Prompt batch size (higher is faster but uses more memory)": "魔法提示词单批数量 (更高的数值会更快但会使用更多内存)",
|
||
"Magic prompt blocklist regex": "魔法提示词黑名单正则表达式",
|
||
"Magic prompt creativity": "魔法提示词创意",
|
||
"Magic prompt model": "魔法提示词模型",
|
||
"Main": "主菜单",
|
||
"mainly allows using more than 200 steps. otherwise, it's a mirror-like param of 'strength schedule'": "主要用于允许使用大于 200 的迭代步数。不然的话其实只是近似于强度调度计划的一个参数",
|
||
"Main menu position": "主菜单位置",
|
||
"Main Settings": "主设置",
|
||
"Maintenance": "维护",
|
||
"Make a backup copy of the model being edited when saving its metadata.": "保存元数据时，备份当前编辑的模型文件",
|
||
"Make an attempt to produce a picture similar to what would have been produced with same seed at specified resolution": "尝试生成与同一种子在特定分辨率下产生的图片相似的图片",
|
||
"Make GIF": "制作 GIF",
|
||
"make gif in addition to the video/s": "除视频外额外制作 GIF",
|
||
"Make Hires. fix+ run before any other extensions (will reload WebUI)": "使 高分辨率修复PLUS 在其他所有插件前执行 (勾选后会立刻重载WebUI)",
|
||
"Make Images": "制作图像",
|
||
"Make K-diffusion samplers produce same images in a batch as when making a single image": "使 K-diffusion 采样方法在批量生成与生成单个图像时，产出相同的结果",
|
||
"Make LoRA (A-B)": "制作差分 LoRA (A-B)",
|
||
"Make LoRA (alpha * A - beta * B)": "制作差分 LoRA (α × A - β × B)",
|
||
"Make your changes, press 'View changes' to review the changed default values,": "修改后通过点击 '查看更改' 来复查修改后的默认设置数值。\n然后点击 \"应用\" 把更改后的数值写入到 webui 根目录中的 ui-config.json文件中。",
|
||
"Make your choices, adjust your settings, set a name, save. To edit a prior choice, select from dropdown and overwrite.": "做出选择，调整设置，设置名称，保存。要编辑先前的选择，请从下拉列表中选择并覆盖。",
|
||
"Make Zip when Save?": "保存时创建 zip 压缩文件?",
|
||
"Manage Extensions": "管理扩展",
|
||
"Manage wildcards for Dynamic Prompts": "为 Dynamic Prompts 管理通配符",
|
||
"manga": "manga (日漫)",
|
||
"manifest for your animation (leave blank to ignore).": " 对应你动画的清单 (留空以忽略)",
|
||
"manipulations": "控制",
|
||
"Manual Class Generation": "手动生成类别",
|
||
"Manual install": "手动安装",
|
||
"mask": "蒙版",
|
||
"Mask": "蒙版",
|
||
"Mask blur": "蒙版边缘模糊度",
|
||
"Mask Blur": "蒙版边缘模糊度",
|
||
"Mask Blur Kernel Size": "蒙版模糊内核大小",
|
||
"Mask Blur Kernel Size(GaussianBlur)": "蒙版模糊内核大小（高斯模糊）",
|
||
"Mask Blur Kernel Size(MedianBlur)": "蒙版模糊内核大小（中值模糊）",
|
||
"Mask brightness adjust": "蒙版亮度调整",
|
||
"Mask by Category": "按分类创建蒙版",
|
||
"mask content ratio": "蒙版内容比例",
|
||
"Mask contrast adjust": "蒙版对比度调整",
|
||
"Mask contrast schedule is from 0-255. Normal is 1. Affects all masks.": "蒙版对比度调度从 0 到 255。正常为1, 影响所有蒙版",
|
||
"Mask directory": "遮罩图像目录",
|
||
"Masked area width (px)": "蒙版区域宽度 (px)",
|
||
"Masked content": "蒙版区域内容处理",
|
||
"Mask erosion (-) / dilation (+)": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 10th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 2nd": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 3rd": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 4th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 5th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 6th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 7th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 8th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask erosion (-) / dilation (+) 9th": "蒙版图像腐蚀 (-) / 蒙版图像膨胀 (+)",
|
||
"Mask file": "蒙版文件",
|
||
"Mask fill": "蒙版填充",
|
||
"Mask for ControlNet Inpaint": "用于 ControlNet 重绘的蒙版",
|
||
"mask image:": "蒙版图像：",
|
||
"Masking Method": "蒙版方式",
|
||
"Mask Init": "蒙版初始化",
|
||
"Mask max area ratio": "蒙版区域最大比率",
|
||
"Mask max area ratio 10th": "蒙版区域最大比率",
|
||
"Mask max area ratio 2nd": "蒙版区域最大比率",
|
||
"Mask max area ratio 3rd": "蒙版区域最大比率",
|
||
"Mask max area ratio 4th": "蒙版区域最大比率",
|
||
"Mask max area ratio 5th": "蒙版区域最大比率",
|
||
"Mask max area ratio 6th": "蒙版区域最大比率",
|
||
"Mask max area ratio 7th": "蒙版区域最大比率",
|
||
"Mask max area ratio 8th": "蒙版区域最大比率",
|
||
"Mask max area ratio 9th": "蒙版区域最大比率",
|
||
"Mask merge mode": "蒙版合并模式",
|
||
"Mask merge mode 10th": "蒙版合并模式",
|
||
"Mask merge mode 2nd": "蒙版合并模式",
|
||
"Mask merge mode 3rd": "蒙版合并模式",
|
||
"Mask merge mode 4th": "蒙版合并模式",
|
||
"Mask merge mode 5th": "蒙版合并模式",
|
||
"Mask merge mode 6th": "蒙版合并模式",
|
||
"Mask merge mode 7th": "蒙版合并模式",
|
||
"Mask merge mode 8th": "蒙版合并模式",
|
||
"Mask merge mode 9th": "蒙版合并模式",
|
||
"Mask min area ratio": "蒙版区域最小比率",
|
||
"Mask min area ratio 10th": "蒙版区域最小比率",
|
||
"Mask min area ratio 2nd": "蒙版区域最小比率",
|
||
"Mask min area ratio 3rd": "蒙版区域最小比率",
|
||
"Mask min area ratio 4th": "蒙版区域最小比率",
|
||
"Mask min area ratio 5th": "蒙版区域最小比率",
|
||
"Mask min area ratio 6th": "蒙版区域最小比率",
|
||
"Mask min area ratio 7th": "蒙版区域最小比率",
|
||
"Mask min area ratio 8th": "蒙版区域最小比率",
|
||
"Mask min area ratio 9th": "蒙版区域最小比率",
|
||
"Mask mode": "蒙版模式",
|
||
"Mask Mode": "蒙版模式",
|
||
"Mask Mode(Override img2img Mask mode)": "蒙版模式（覆盖图生图的蒙版模式）",
|
||
"Mask option": "蒙版选项",
|
||
"Mask overlay blur": "蒙版覆盖模糊度",
|
||
"Mask Preprocessing": "蒙版处理",
|
||
"Mask schedule": "蒙版调度计划",
|
||
"Mask Setting": "蒙版设置",
|
||
"masks from files: in [], like [mask1.png]": "从文件中获取蒙版:[] ，比如 [mask1.png]",
|
||
"Mask size": "蒙版尺寸",
|
||
"Mask source": "蒙版来源",
|
||
"Mask Target (e.g., girl, cats)": "蒙版目标（如 girl, cats）",
|
||
"Mask Threshold": "蒙版阈值",
|
||
"Mask transparency": "蒙版透明度",
|
||
"Mask x(→) offset": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 10th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 2nd": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 3rd": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 4th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 5th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 6th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 7th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 8th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask x(→) offset 9th": "蒙版 X 轴 (→) 偏移",
|
||
"Mask y(↑) offset": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 10th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 2nd": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 3rd": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 4th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 5th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 6th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 7th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 8th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Mask y(↑) offset 9th": "蒙版 Y 轴 (↑) 偏移",
|
||
"Match input size": "匹配输入图尺寸",
|
||
"Match net size to input size": "匹配原图尺寸",
|
||
"Matrix": "矩阵",
|
||
"Matrix mode guide": "矩阵模式指南",
|
||
"Max": "最大值",
|
||
"Max additional denoise": "最大额外去燥",
|
||
"Max Batch Count": "最大批次数量",
|
||
"Max Crop Size": "最大修复尺寸",
|
||
"Max. feedback images": "最大反馈图片数",
|
||
"max frames": "最大帧数",
|
||
"max_frames": "最大帧数",
|
||
"Max frames": "最大帧数",
|
||
"Max generations (0 = all combinations - the batch count value is ignored)": "最大生成数（0 = 所有组合数 - 忽略批次计数值）",
|
||
"Max Image Size": "最大图像尺寸",
|
||
"Maximize area": "最大化面积",
|
||
"Maximum aesthetic_score": "最大美学评分",
|
||
"Maximum attention": "最大权重",
|
||
"Maximum batch size": "最大单批数量",
|
||
"Maximum execution time (seconds)": "最大执行时间(以秒为单位)",
|
||
"Maximum height": "最大高度",
|
||
"Maximum Image Height:": "图片最大高度",
|
||
"Maximum image size": "最大图像尺寸",
|
||
"Maximum image size, in megapixels": "上述选项的最大图像尺寸，单位：百万像素",
|
||
"Maximum Image Width:": "图片最大宽度：",
|
||
"Maximum Image Width/Height:": "图片最大宽度/高度：",
|
||
"Maximum keyframe gap": "最大关键帧间隔",
|
||
"Maximum number of checkpoints loaded at the same time": "Stable Diffusion 模型可同时加载的最大数量",
|
||
"Maximum number of faces to detect": "检测的最大人脸数量",
|
||
"Maximum number of images in upscaling cache": "图像放大缓存中的最大图片数量",
|
||
"Maximum number of tags to be shown in the UI": "UI 能显示的最大标签数量",
|
||
"Maximum prompt token count": "最大提示词词元长度",
|
||
"Maximum ranking": "最高评分",
|
||
"Maximum results": "候选Tag最大数量",
|
||
"Maximum score": "最高美学评分",
|
||
"Maximum steps fraction to mirror at": "镜像干涉止步于总迭代步数的",
|
||
"Maximum token length to respect. You probably want to leave this at 75.": "听从的最大词元长度。也许有人想保持本选项数值为 75 。",
|
||
"Maximum width": "最大宽度",
|
||
"Max key frames": "最大关键帧数",
|
||
"Max Length": "最大长度",
|
||
"Max magic prompt length": "魔法提示词最大长度",
|
||
"Max models": "最大模型数量",
|
||
"Max number of dataset folders to show": "要显示的最大数据集文件夹数",
|
||
"Max number of top tags to show": "要显示的最大常见标签数",
|
||
"Max prompt words for [prompt_words] pattern": "用于替代 [prompt_words] 占位符的最大提示词数量",
|
||
"Max Res": "最大分辨率",
|
||
"Max Resolution": "最大分辨率",
|
||
"Max resolution of temporary files": "临时文件最大分辨率",
|
||
"Max steps": "最大步数",
|
||
"Max Token Length": "最大词元长度",
|
||
"Max. weight": "最高权重",
|
||
"M_B_00": "模型 B 中间层",
|
||
"MBW": "分块设置权重(MBW)",
|
||
"MBW Each": "A/B 模型分别分块设置权重 (MBW Each)",
|
||
"mbw weights": "分块权重",
|
||
"mediapipe_face": "mediapipe_face (脸部边缘检测)",
|
||
"medium": "中速",
|
||
"melanin": "melanin (黑色素/黑人)",
|
||
"Memo": "备注",
|
||
"Memory": "内存",
|
||
"Memory Attention": "内存注意力",
|
||
"Memory optimization": "显存优化选项",
|
||
"Memory usage": "内存使用量",
|
||
"Merge": "融合",
|
||
"Merge!": "融合",
|
||
"Merge and gen": "融合并生成",
|
||
"Merge And Gen": "融合并生成",
|
||
"Merge and Invert": "合并且反相",
|
||
"Merge Block Weighted": "模型分块合并",
|
||
"Merge&Gen": "融合并生成",
|
||
"Merge LoRAs": "合并 LoRA",
|
||
"Merge mode": "合并模式",
|
||
"Merge Mode": "融合算法",
|
||
"Merge models and load it for generation": "融合模型并加载它生成图像",
|
||
"Merge to Checkpoint": "合并到大模型",
|
||
"Message": "信息",
|
||
"messy": "messy (混乱)",
|
||
"Metadata": "元数据",
|
||
"Metadata in JSON format": "JSON 格式元数据",
|
||
"Metadata to show in XY-Grid label for Model axes, comma-separated (example: \"ss_learning_rate, ss_num_epochs\")": "显示在 X/Y 表标签下的元数据选项，以逗号分隔（示例：\"ss_learning_rate, ss_num_epochs\"）",
|
||
"Metadeta": "元数据",
|
||
"Method": "方案",
|
||
"(method to decode latent to image)": "(把潜变量解码为图像的方法)",
|
||
"(method to encode image to latent (use in img2img, hires-fix or inpaint mask))": "(把图像编码为潜变量的方法 (在图生图, 高分辨率修复或重绘蒙版中启用))",
|
||
"MiDaS weight (vid2depth)": "MiDaS 权重 (vid2depth)",
|
||
"Middle Name": "中间名",
|
||
"Min": "最小值",
|
||
"Minimize error": "最小错误阈值",
|
||
"minimum aesthetic_score": "按美学评分下限过滤",
|
||
"Minimum aesthetic_score": "最小美学评分",
|
||
"Minimum attention": "最小权重",
|
||
"Minimum batch size": "最小单批数量",
|
||
"Minimum height": "最小高度",
|
||
"Minimum keyframe gap": "最小关键帧间隔",
|
||
"Minimum lighting ratio": "最小照明比率",
|
||
"Minimum number of pages per load": "每次加载的最小页数",
|
||
"Minimum Prior Loss Weight": "最小先验损失权重",
|
||
"Minimum prompt token count": "最小提示词词元长度",
|
||
"Minimum ranking": "最低评分",
|
||
"Minimum score": "最低美学评分",
|
||
"Minimum steps": "最小迭代步数",
|
||
"Minimum width": "最小宽度",
|
||
"min_mask_region_area": "最小蒙版面积",
|
||
"Min-max": "最低 - 最高",
|
||
"Min tag fraction in batch and interrogations": "单次或批量反推时的最小标签评分",
|
||
"Min. weight": "最低权重",
|
||
"Mirror webcam": "镜像网络摄像头",
|
||
"Miscellaneous": "杂项",
|
||
"missing metadata": " 无元数据",
|
||
"Mixed": "混合",
|
||
"Mixed Precision": "混合精度",
|
||
"Mixed precision (If your graphics card supports bf16 better)": "混合精度训练（若显卡支持，则 bf16 更佳）",
|
||
"MLDanbooru Tagger": "ML-Danbooru 标签器",
|
||
"mlsd": "mlsd (M-LSD 直线线条检测)",
|
||
"MLSD": "MLSD (直线)",
|
||
"Mobile Phone": "移动电话",
|
||
"mode": "模式",
|
||
"Mode": "模式",
|
||
"model": "模型",
|
||
"model.": " 模型",
|
||
"Model": "模型",
|
||
"Model:": "模型: ",
|
||
"Model 1": "模型 1",
|
||
"Model 2": "模型 2",
|
||
"Model 3": "模型 3",
|
||
"Model 4": "模型 4",
|
||
"Model 5": "模型 5",
|
||
"model A": "模型 A",
|
||
"model_A": "模型 A",
|
||
"Model A": "模型 A",
|
||
"Model_A": "模型A",
|
||
"model B": "模型 B",
|
||
"model_B": "模型 B",
|
||
"Model B": "模型 B",
|
||
"Model_B": "模型 B",
|
||
"model C": "模型 C",
|
||
"Model C": "模型 C",
|
||
"Model cache size (requires restart)": "模型缓存数量 (需重启)",
|
||
"Model compile mode (experimental)": "模型编译模式（实验性）",
|
||
"Model Converter": "模型转换",
|
||
"Model description/readme/notes/instructions": "模型的描述信息/说明/注释/指引",
|
||
"Model Epoch:": "模型 Epoch 数:",
|
||
"model hash": "模型哈希值",
|
||
"Model hash": "模型哈希值",
|
||
"model-keyword": "model-keyword (模型关键词)",
|
||
"model list": "模型列表",
|
||
"Model list": "模型列表",
|
||
"model_name": "模型名",
|
||
"Model Name": "模型名称",
|
||
"(Model names [with file extension] or their hashes, separated by commas)": "(模型名 [需要带文件拓展名] 或它们的哈希值, 用逗号分隔)",
|
||
"model of the upscaler to use. 'realesr-animevideov3' is much faster but yields smoother, less detailed results. the other models only do x4": "需要使用的超分模型。 'realesr-animevideov3' 速度更快但生成的结果更平滑、更详细。其他超分模型只支持 4 倍放大",
|
||
"Model params": "模型参数",
|
||
"Model path": "模型路径",
|
||
"Model Path": "模型路径",
|
||
"Model path filter": "按模型路径过滤",
|
||
"Model Revision:": "模型修订版本号:",
|
||
"models": "模型相关",
|
||
"Models": "模型",
|
||
"Models...": "模型列表...",
|
||
"Model scheduler to use. Only applies to models before 2.0.": "使用的模型调度器。仅适用于低于 2.0 版本的模型。",
|
||
"Models directory (if not default)": "模型目录 (如非默认)",
|
||
"Model Selection": "选择模型",
|
||
"Model Toolkit": "模型工具箱",
|
||
"model to use": "使用的模型",
|
||
"Model type": "模型类型",
|
||
"Model Type": "模型种类",
|
||
"Model Types": "模型种类",
|
||
"Model Version": "模型版本",
|
||
"Mode to add the extra tags to the main tag list": "选择将额外标签添加到主要标签列表的模式",
|
||
"Mode to use for model list": "模型列表模式",
|
||
"Modified:": "最后修改日期:",
|
||
"Module Color": "方块颜色",
|
||
"Modules": "模块",
|
||
"monochromatic": "monochromatic (单色调)",
|
||
"More info about Anti Burn": "关于 Anti Burn 的更多信息",
|
||
"Motion": "运动",
|
||
"Motion module": "动画模型",
|
||
"Motion use prev img": "运动使用前帧渲染图像",
|
||
"Mov2Mov output path for image": "Mov2Mov 图片输出路径",
|
||
"Mov2Mov output path for vedio": "Mov2Mov 视频输出路径",
|
||
"Mov2Mov output path for video": "Mov2Mov 视频输出路径",
|
||
"Move": "移动",
|
||
"Move buttons copy instead of move": "将图库浏览器内所有 \"移动\" 按钮改为 \"复制\" 按钮",
|
||
"move canvas left/right in pixels per frame": "以每帧多少像素左/右移动画布",
|
||
"move canvas towards/away from view [speed set by FOV]": "将画布靠近/远离镜头 [速度由视场角设置决定］",
|
||
"move canvas up/down in pixels per frame": "以每帧多少像素上/下移动画布",
|
||
"Move completion popup together with text cursor": "将弹出窗口与文本光标一起移动",
|
||
"Move ControlNet images to CPU (if applicable)": "将 ControlNet 图像移动到 CPU (如果适用)",
|
||
"Move ControlNet tensor to CPU (if applicable)": "将 ControlNet tensor 移至CPU (如果适用)",
|
||
"Move/Copy/Delete matching .txt files": "将图片的移动、复制、删除操作应用到与之同名的 txt 文件",
|
||
"Move face restoration model from VRAM into RAM after processing": "处理完成后，将面部修复模型从显存卸载到内存",
|
||
"Move File(s)": "移动文件",
|
||
"Move Mode (X key)": "移动模式(X 键)",
|
||
"Move motion module to CPU (default if lowvram)": "将模型移动到 CPU (lowvram 默认行为)",
|
||
"Move or Delete": "移动或删除",
|
||
"Move or Delete Files": "移动/删除文件",
|
||
"Move quicksettings to image setting panel": "移动快速设置到左侧图像设置面板",
|
||
"Move to archive": "移至归档",
|
||
"Move to directory": "将图片移动到目标路径",
|
||
"Move to favorites": " 移动到收藏夹",
|
||
"Move VAE and CLIP to RAM when training hypernetwork. Saves VRAM.": "训练超网络时将 VAE 和 CLIP 模型移动到内存，可节省显存",
|
||
"Move VAE and CLIP to RAM when training if possible": "训练时尽可能将 VAE 与 CLIP 模型移动到内存",
|
||
"Move VAE and CLIP to RAM when training if possible. Saves VRAM.": "如果可行，训练时将 VAE 和 CLIP 模型从显存移动到内存，可节省显存",
|
||
"Move VAE to GPU": "将 VAE 移动到 GPU",
|
||
"Move VAE to GPU (if possible)": "将 VAE 移动到 GPU (如果允许)",
|
||
"Move visible tags to exclude tags": "将可见标签移至排除标签",
|
||
"Move visible tags to keep tags": "将可见标签移至保留标签",
|
||
"Moving canvas": "移动画布",
|
||
"Moving the canvas": "移动画布",
|
||
"Multi ControlNet: Max models amount (requires restart)": "ControlNet Unit 的最大数量 (需重启)",
|
||
"Multi-frame rendering": "多帧渲染",
|
||
"Multi Merge": "多重合并",
|
||
"Multi Model Merge": "多模型合并",
|
||
"Multiplication (2^N)": "倍率 (2^N)",
|
||
"multiplier": "倍率",
|
||
"Multiplier": "倍率",
|
||
"Multiplier for extra networks": "扩展模型默认权重",
|
||
"Multiplier (M) - set to 0 to get model A": "融合比例 (M) - 设为 0 等价于直接输出模型 A",
|
||
"multiply": "乘积",
|
||
"Multi Proc Cmd": "多进程命令",
|
||
"Multi string search: part1, part2.. (Enter key to update)": "多字符检索: 第 1 部分, 第 2 部分 ... (按回车 [Enter] 键更新)",
|
||
"must be enabled": "选项需要启用",
|
||
"(must be < sampling steps)": "(需小于迭代步数)",
|
||
"My prompt is more important": "更偏向提示词",
|
||
"naive": "朴素卷积算法",
|
||
"naive_interpolating": "朴素插值算法",
|
||
"name": "名称",
|
||
"Name": "名称",
|
||
"Name 0": "名称 0",
|
||
"Name 1": "名称 1",
|
||
"Name 10": "名称 10",
|
||
"Name 11": "名称 11",
|
||
"Name 12": "名称 12",
|
||
"Name 13": "名称 13",
|
||
"Name 14": "名称 14",
|
||
"Name 15": "名称 15",
|
||
"Name 2": "名称 2",
|
||
"Name 3": "名称 3",
|
||
"Name 4": "名称 4",
|
||
"Name 5": "名称 5",
|
||
"Name 6": "名称 6",
|
||
"Name 7": "名称 7",
|
||
"Name 8": "名称 8",
|
||
"Name 9": "名称 9",
|
||
"Name of saved checkpoint to load weights from": "用于加载权重的模型名称",
|
||
"Native Diffusers": "原生 Diffusers",
|
||
"nature": "nature (自然主义)",
|
||
"Navigate image viewer with gamepad": "使用游戏手柄导航图像查看器",
|
||
"Near clip": "近端衰减",
|
||
"Near schedule": "近处裁面距离调度计划",
|
||
"Neck": "颈部",
|
||
"Need help?": "需要帮助？",
|
||
"need help? please visit our": "需要帮助? 请浏览我们的 ",
|
||
"need input your want to translate": "请输入你想翻译的内容",
|
||
"negative": "反向提示词",
|
||
"Negative Filter": "Negative 过滤器",
|
||
"Negative Guidance minimum sigma": "反向提示词引导最小 sigma",
|
||
"Negative prompt": "反向提示词",
|
||
"Negative Prompt": "反向提示词",
|
||
"Negative prompt for hires fix pass.\nLeave empty to use the same negative prompt as in first pass.": "用于高分修复层的反向提示词\n留空以使用与第一层相同的提示词",
|
||
"Negative prompt for upscale (replaces generation prompt)": "用于放大的反向提示词 (替换生成提示词)",
|
||
"Negative prompt mode": "反向提示词模式",
|
||
"Negative prompt: please enter Y if this prompt is a negative prompt.": "反向提示词：如果该提示词是反向提示词，请输入 Y。",
|
||
"Negative prompt (press Ctrl+Enter or Alt+Enter to generate)": "反向提示词 (按 Ctrl+Enter 或 Alt+Enter 开始生成)\nNegative prompt",
|
||
"Negative Prompts": "反向提示词",
|
||
"negative prompt to be appended to *all* prompts. DON'T use --neg here!": "反向提示词会被添加到左右提示词内，请勿在此处使用 --neg 字段",
|
||
"Negative Prompt Weight": "反向提示词权重",
|
||
"Negative Prompt, will also be appended": "追加反向提示词",
|
||
"neg_prompt": "反向提示词",
|
||
"Net dim (128 ~ 144MB)": "网络维度 (128 ~ 144MB)",
|
||
"Net height": "深度图高度",
|
||
"Net width": "深度图宽度",
|
||
"Network module": "附加网络模块",
|
||
"Network module 1": "附加模型 1",
|
||
"Network module 2": "附加模型 2",
|
||
"Network module 3": "附加模型 3",
|
||
"Network module 4": "附加模型 4",
|
||
"Network module 5": "附加模型 5",
|
||
"Never": "从不",
|
||
"Nevysha Cozy Nest Settings": "Nevysha Cozy Nest 设置",
|
||
"Nevysha Cozy Nest Update Info": "Nevysha Cozy Nest 更新信息",
|
||
"New Canvas Height": "新画布高度",
|
||
"New Canvas Width": "新画布宽度",
|
||
"new commits": "新提交版本",
|
||
"New defaults will apply after you restart the UI.": "新的默认设置将会在重启 UI 后应用。",
|
||
"newest first": "按发布日期倒序",
|
||
"New preset name ": "新预设名称",
|
||
"New row": "新一行",
|
||
"New Scribble Drawing Height": "新线稿画板高度",
|
||
"New Scribble Drawing Width": "新线稿画板宽度",
|
||
"New text file will be created if you are using filename as captions.": "如果您使用文件名作为描述，将创建新的文本文件",
|
||
"Next batch": "下一批",
|
||
"Next Page": "下一页",
|
||
"Nickname": "昵称",
|
||
"no": "否",
|
||
"No": "否",
|
||
"no-ema": "删除 EMA 权重",
|
||
"no find:": "未找到：",
|
||
"no image selected": "没有图片被选中",
|
||
"No interpolation": "原样输出",
|
||
"No interpolation will be used. Requires one model; A. Allows for format conversion and VAE baking.": "直接输出主要模型。需要一个模型 A。可用于模型格式转换和嵌入 VAE。",
|
||
"Noise": "噪声(点)",
|
||
"Noise Inversion": "噪声反转",
|
||
"Noise mask schedule": "噪声蒙版调度计划",
|
||
"(noise multiplier; applies to Euler a and other samplers that have a in them)": "(噪声倍率: 适用于 Euler a 和其他具有 a 的采样方法)",
|
||
"noise multiplier; applies to Euler a and other samplers that have the letter 'a' in them": "噪声倍率; 应用于 Euler a 和其他带 a 的采样方法",
|
||
"(noise multiplier; currently only applies to ancestral samplers (i.e. Euler a) and SDE samplers)": "(噪声倍率; 当前仅作用于 Ancestral 采样方法 (例如 Euler a) 和 SDE 采样方法)",
|
||
"Noise multiplier for img2img": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 10th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 2nd": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 3rd": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 4th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 5th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 6th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 7th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 8th": "图生图噪声倍率",
|
||
"Noise multiplier for img2img 9th": "图生图噪声倍率",
|
||
"(noise multiplier; higher = more unperdictable results)": "(噪声倍率; 越高 = 结果越难以预测)",
|
||
"(noise multiplier; higher = more unpredictable results)": "(噪声倍率; 越高 = 结果越难以预测)",
|
||
"Noise multiplier schedule": "噪声倍率调度计划",
|
||
"Noise schedule": "噪声调度计划",
|
||
"Noise scheduler": "噪声调度器",
|
||
"Noise Tolerance": "噪声容忍度",
|
||
"Noise type": "噪声类型",
|
||
"No model has new version": "所有模型均是最新版本",
|
||
"none": "无",
|
||
"None": "无",
|
||
"NONE": "无",
|
||
"None (just grayscale)": "什么都不做（灰度模式）",
|
||
"None - prompt only": "无 - 仅提示词",
|
||
"normal": "正常",
|
||
"Normal": "Normal",
|
||
"normal_bae": "normal_bae (Bae 法线贴图提取)",
|
||
"Normalizes each image separately by mean and standard deviation in your dataset. Useful to preserve likeness to your images.": "根据数据集中的平均值和标准差分别对每幅图像进行归一化处理。有助于保持图像的相似性。",
|
||
"Normally, changing the resolution will completely change an image, even when using the same seed. If you generated an image with a particular seed and then changed the resolution, put the original resolution here to get an image that more closely resemles the original": "一般情况下，即使使用相同的种子，改变分辨率也会完全改变图像。如果使用特定种子生成图像，然后但又需要改变分辨率，请在此输入原始分辨率以获得更接近原始分辨率的图像。",
|
||
"Normally, it creates a single random prompt. With prompt compounder, it will generate multiple prompts and compound them together.": "一般情况下只能创建一个单一的随机提示。但有了提示词混合，可以生成多个提示词并将它们复合在一起。",
|
||
"(normally you'd do less with less denoising)": "(正常情况下越小的重绘幅度需要的迭代步数更少)",
|
||
"normal_midas": "normal_midas (Midas 法线贴图提取)",
|
||
"Normal with batch": "正常（带批处理）",
|
||
"Nose To Neck": "鼻颈距离",
|
||
"not": "不会",
|
||
"note": "注意事项",
|
||
"Note": "注意事项",
|
||
"Note: Moved or deleted images will be unloaded.": "备注：已移动或已删除的图像将被卸载。",
|
||
"Notes": "注意事项",
|
||
"Note that parseq overrides:": "以下参数将会被参数定序器覆盖设置：",
|
||
"(not for Video Input mode)": " (不用于视频输入模式)",
|
||
"Nothing here. Add some content to the following directories:": "暂无内容。请添加模型到以下目录：",
|
||
"(No Trigger Word)": "(无触发词)",
|
||
"not save grid": "不保存网格图",
|
||
"Now use it like this:": "然后像这样使用：",
|
||
"Nucleus Sampling": "Nucleus Sampling (核心取样)",
|
||
"nudity": "nudity (裸体)",
|
||
"NUl Image Enhancer": "NUI 图像增强",
|
||
"Number of columns on the page": "每页列数",
|
||
"Number of epochs": "epoch 数量",
|
||
"Number of epochs after which training will be paused for the specified time. Useful if you want to give your GPU a rest.": "每训练多少 Epoch 后暂停。使 GPU 充分休息。",
|
||
"Number of frames": "总帧数",
|
||
"Number of iterations": "迭代次数",
|
||
"Number of Lora networks to keep cached in memory": "可缓存在内存中的 Lora 模型数量",
|
||
"Number of negative vectors per token": "每个词元的反向向量数",
|
||
"Number of repeats for a single input image per epoch; used only for displaying epoch number": "每期 (epoch) 中单个输入图像的重复次数； 仅用于显示期数",
|
||
"Number of rows on the page": "每页行数",
|
||
"Number of samples to generate": "要生成的样本数量",
|
||
"Number of Samples to Generate": "要生成的样本数量",
|
||
"Number of sampling steps for upscaled picture. If 0, uses same as for original.": "高分辨率修复图片的迭代步数。如果为0，则使用与文生图设置相同的迭代步数。",
|
||
"number of seed": "种子值",
|
||
"Number of steps for the warmup in the lr scheduler. LR will start at 0 and increase to this value over the specified number of steps.": "LR 调度器中预热的步数。LR 会从 0 开始按指定的步数内递增至该值。",
|
||
"number of the frames that we will blend between current imagined image and input frame image": "当前想象图像和输入帧图像之间混合的帧数",
|
||
"Number of updates steps to accumulate before performing a backward/update pass.": "在执行反向传播/更新之前累积的更新步数。",
|
||
"Number of vectors per token": "每个词元的向量数",
|
||
"(O10) Output ckpt Name": "(O10) 输出模型文件名",
|
||
"(O1) Output ckpt Name": "(O1) 输出模型文件名",
|
||
"(O2) Output ckpt Name": "(O2) 输出模型文件名",
|
||
"(O3) Output ckpt Name": "(O3) 输出模型文件名",
|
||
"(O4) Output ckpt Name": "(O4) 输出模型文件名",
|
||
"(O5) Output ckpt Name": "(O5) 输出模型文件名",
|
||
"(O6) Output ckpt Name": "(O6) 输出模型文件名",
|
||
"(O7) Output ckpt Name": "(O7) 输出模型文件名",
|
||
"(O8) Output ckpt Name": "(O8) 输出模型文件名",
|
||
"(O9) Output ckpt Name": "(O9) 输出模型文件名",
|
||
"object": "object (物件)",
|
||
"object - Can be a random object, a building or a vehicle.": "object - 物件 - 可以是一个随机的物体，也可以是一个建筑物或一辆车。",
|
||
"(obsolete; set to 0 and use the two settings above instead)": "(已过时; 设置为 0 以使用上述两个选项的设置)",
|
||
"octane render": "octane render (OC渲染)",
|
||
"official Deforum Discord": " Deforum 官方 Discord 频道",
|
||
"Official Deforum Wiki:": "Deforum 官方 Wiki: ",
|
||
"Offset Noise": "噪声偏移 (Offset Noise)",
|
||
"# of in-between frames that will not be directly diffused": "不会被直接扩散的中间帧的 # 数",
|
||
"# of threads to use for hash calculation (increase if using an SSD)": "用于哈希计算的线程数 (如果使用 SSD 可适当增加)",
|
||
"oldest first": "按发布日期正序",
|
||
"On": "开",
|
||
"once": "单次复用",
|
||
"Once turned on, it will retry for n amount of times to get an image with the quality score. If not, it will take the best image so far and continue.": "一旦启用，它将持续生成 N 次以获得具有一定质量分数的图像。如果没有，它将保留评分最好的图像持续生成。",
|
||
"On, concurrent (don't pause generation)": "开, 并发处理 (不暂停生成进程)",
|
||
"One Button Prompt": "One Button Prompt (一键生成提示词)",
|
||
"One Button Run and Upscale": "一键运行并放大",
|
||
"online": "线上服务",
|
||
"Online 3D Openpose Editor": "在线 3D Openpose 编辑器",
|
||
"Only": "仅",
|
||
"only 2D motion parameters will be used, but this mode uses the least amount of VRAM. You can optionally enable flip_2d_perspective to enable some psuedo-3d animation parameters while in 2D mode.": "将只使用 2D 运动参数，该模式下使用的显存最少。你可以选择启用 2D 透视翻转，以便在 2D 模式下启用一些模拟 3D 动画的参数",
|
||
"only affects the 'Blend'": " 仅影响 '混合' ",
|
||
"(only applies if non-zero and overrides above)": "(仅在数值设置为非零时启用, 启用时覆盖原 Token 合并比率设置)",
|
||
"Only applies to inpainting models. Determines how strongly to mask off the original image for inpainting and img2img. 1.0 means fully masked, which is the default behaviour. 0.0 means a fully unmasked conditioning. Lower values will help preserve the overall composition of the image, but will struggle with large changes.": "仅适用于局部重绘专用的模型（模型后缀为 inpainting.ckpt 的模型）。决定了蒙版在局部重绘以及图生图中屏蔽原图内容的强度。 1.0 表示完全屏蔽原图，这是默认行为。0.0 表示完全不屏蔽让原图进行图像调节。较低的值将有助于保持原图的整体构图，但很难遇到较大的变化",
|
||
"Only copy to models with no metadata": "仅复制到不含元数据的模型",
|
||
"Only copy to models with same session ID": "仅复制到具有相同 Session ID 的模型",
|
||
"Only Hand": "仅显示手部(移除脚部)",
|
||
"ONLY in use when working with a P2P ckpt!": "此选项仅在加载 Pix2Pix 模型时生效",
|
||
"*Only in use with pix2pix checkpoints!*": "*仅在加载 Pix2Pix 模型时生效!*",
|
||
"Only keep one model on device": "仅保留一个模型在显存中",
|
||
"Only masked": "仅蒙版区域",
|
||
"Only masked padding, pixels": "仅蒙版区域下边缘预留像素",
|
||
"Only Mouth": "仅嘴部",
|
||
"only other types --> Will pick only from the more unique types, such as stained glass window or a funko pop": "only other types -- 仅其它类型 --> 只从其他更独特的类型中挑选，如彩色玻璃窗或一只玩具人偶。",
|
||
"Only Selected Tags": "仅选中标签",
|
||
"Only show alias": "仅展示别名",
|
||
"Only Show Models have no Info": "只显示缺少信息的模型",
|
||
"Only show models that have/don't have user-added metadata": "按是否有元数据过滤模型",
|
||
"Only show .safetensors format models": "只显示 .safetensors 格式的模型",
|
||
"Only store preferences locally": "仅在本地保存设置",
|
||
"Only track the mouth": "仅追踪嘴部",
|
||
"Only upscale will not use txt2img to generate an image.": "仅放大时不会通过文生图功能生成图像",
|
||
"Only use mid-control when inference": "仅在生成图片时使用中间层控制 (mid-control)",
|
||
"Only user list": "仅用户清单",
|
||
"Onnx model filename": "Onnx 模型文件名 (包含路径)",
|
||
"ONNX opset version": "ONNX 算子集版本",
|
||
"(O)Output Model Name": "输出模型文件名",
|
||
"Opacity": "不透明度",
|
||
"Open...": "打开...",
|
||
"Open images output directory": "打开图像输出目录",
|
||
"Open images output directory.": "打开图像输出目录",
|
||
"Open intermediate results": "立即打开当前效果图",
|
||
"Open new canvas": "打开新画布",
|
||
"Open New Canvas": "打开新画布",
|
||
"Open New Scribble Drawing Canvas": "创建新的线稿画板",
|
||
"Open output directory": "打开输出目录",
|
||
"openpose": "openpose (OpenPose 姿态)",
|
||
"OpenPose": "OpenPose (姿态)",
|
||
"OpenPose Editor": "OpenPose 编辑器",
|
||
"openpose_face": "openpose_face (OpenPose 姿态及脸部)",
|
||
"openpose_faceonly": "openpose_faceonly (OpenPose 仅脸部)",
|
||
"openpose_full": "openpose_full (OpenPose 姿态、手部及脸部)",
|
||
"openpose_hand": "openpose_hand (OpenPose 姿态及手部)",
|
||
"Open results": "打开最终效果图",
|
||
"Open TextEditor": "打开文本编辑器",
|
||
"Open the generated .ebs under project directory and press [Run All] button.": "打开工程目录下生成的 .ebs 文件，然后按 [Run All] 按钮。",
|
||
"Open this model's civitai url": "在新标签页打开本模型的 Civitai 页面",
|
||
"Open Url At Client Side": "在浏览器侧打开链接",
|
||
"Optical Flow": "光流法",
|
||
"Optical flow cadence": "生成间隔中启用光流法",
|
||
"Optical flow generation": "光流生成",
|
||
"Optimizations": "优化设置",
|
||
"Optimizer": "优化器",
|
||
"Optimizer algorithm.\nRecommended settings (LR = Learning Rate, WD = Weight Decay):\nTorch / 8Bit AdamW - LR: 2e-6, WD: 0.01\nLion - LR: 5e-7, WD: 0.02\nAdamW Adapt - LR: 0.05, WD: 0\nLion Adapt - LR: ??, WD:0\nSGD Adapt - LR: 1, WD: 0\nAdan Adapt - LR: 0.2, WD: 0.01": "优化设置。\n推荐以下设置 (LR = 学习率, WD = 权重衰减):\nTorch / 8Bit AdamW - LR: 2e-6, WD: 0.01\nLion - LR: 5e-7, WD: 0.02\nAdamW Adapt - LR: 0.05, WD: 0\nLion Adapt - LR: ??, WD:0\nSGD Adapt - LR: 1, WD: 0\nAdan Adapt - LR: 0.2, WD: 0.01",
|
||
"Optimizer type": "优化器类型",
|
||
"Optionally use [filewords] to read image captions from files.": "可选择使用 [filewords] 去从文件中读取图像的描述",
|
||
"(Optional) Path to directory with classification/regularization images": "(可选) 带有分类/正则化图像的目录路径",
|
||
"(optional) separated by commas. EX: Character Name/Style Attributes": "（可选）用逗号分隔，例如：Character Name/Style Attributes",
|
||
"Options": "选项",
|
||
"Options are all options hardcoded, and additional you added in additional_components.py": "选项都是硬编码的选项，并且是您在 additional_components.py 中添加的附加选项",
|
||
"Options can be given weights:": "选项可以被赋予权重",
|
||
"Options in main UI": "主界面额外选项",
|
||
"Options in main UI - img2img": "主界面额外选项 - 图生图",
|
||
"Options in main UI - number of columns": "主界面的额外选项 - 列数",
|
||
"Options in main UI - place into an accordion": "主界面的额外选项 - 置入一个手风琴容器",
|
||
"Options in main UI - txt2img": "主界面额外选项 - 文生图",
|
||
"- or -": "- 或 -",
|
||
"or": "或",
|
||
"OR": "或",
|
||
"Order": "排序",
|
||
"Organization": "组织",
|
||
"original": "原图",
|
||
"Original:": "原项目:",
|
||
": Original extension": ": 原始扩展名",
|
||
": Original extension\nAvailable algorithms:": ": 原始扩展名\n可用算法: ",
|
||
": Original filename without extension": ": 没有扩展名的原始文件名",
|
||
"Original filename without extension": "没有扩展名的原始文件名",
|
||
"Original file’s hash (good for deleting duplication)": "原始文件哈希值 (有助于检测重复项)",
|
||
"Original First": "原文在上",
|
||
"Original Image": "原始图像",
|
||
"OriginalImg": "OriginalImg (原始输入的第一帧)",
|
||
"Original Movie Path": "原始视频路径（路径和文件名均不可包含中文、下划线和特殊符号）",
|
||
"Original negative prompt": "原始反向提示词",
|
||
"Original prompt": "原始正向提示词",
|
||
"Original Text = \"A, A, B, C\" Common Tags = \"B, A\" Edit Tags = \"X, Y\"": "原文本 = \"A, A, B, C\" 常用标签 = \"B, A\" 编辑标签 = \"X, Y\"",
|
||
"Original Text = \"A, B, C\" Common Tags = \"(nothing)\" Edit Tags = \"X, Y\"": "原文本 = \"A, B, C\" 常用标签 = \"(nothing)\" 编辑标签 = \"X, Y\"",
|
||
"Original Text = \"A, B, C, D, E\" Common Tags = \"A, B, D\" Edit Tags = \", X, \"": "原文本 = \"A, B, C, D, E\" 常用标签 = \"A, B, D\" 编辑标签 = \", X, \"",
|
||
"original video frame": "原始视频帧",
|
||
"Original Weights": "原始权重",
|
||
"or, manually enhance the image": "↓手动控制图像增强参数↓",
|
||
"(or open as text in a new page)": "（或在新的标签页查看）",
|
||
"or to CTRL+SHIFT": "将 CTRL 绑定更改为 CTRL+SHIFT",
|
||
"Other": "其他",
|
||
"Other:": "其他:",
|
||
"Other prompt fields": "其他提示词段",
|
||
"others": "其他",
|
||
"- Others": "- 其他",
|
||
"Others": "其他",
|
||
"Other Setting": "其他设置",
|
||
"(otherwise, those detected as for incompatible version of Stable Diffusion will be hidden)": "(否则, 将隐藏不兼容当前加载的 Stable Diffusion 模型版本的模型)",
|
||
"OUT00": "输出层 00",
|
||
"OUT01": "输出层 01",
|
||
"OUT02": "输出层 02",
|
||
"OUT03": "输出层 03",
|
||
"OUT04": "输出层 04",
|
||
"OUT05": "输出层 05",
|
||
"OUT06": "输出层 06",
|
||
"OUT07": "输出层 07",
|
||
"OUT08": "输出层 08",
|
||
"OUT09": "输出层 09",
|
||
"OUT10": "输出层 10",
|
||
"OUT11": "输出层 11",
|
||
"OUT_A_00": "模型 A 输出层 00",
|
||
"OUT_A_01": "模型 A 输出层 01",
|
||
"OUT_A_02": "模型 A 输出层 02",
|
||
"OUT_A_03": "模型 A 输出层 03",
|
||
"OUT_A_04": "模型 A 输出层 04",
|
||
"OUT_A_05": "模型 A 输出层 05",
|
||
"OUT_A_06": "模型 A 输出层 06",
|
||
"OUT_A_07": "模型 A 输出层 07",
|
||
"OUT_A_08": "模型 A 输出层 08",
|
||
"OUT_A_09": "模型 A 输出层 09",
|
||
"OUT_A_10": "模型 A 输出层 10",
|
||
"OUT_A_11": "模型 A 输出层 11",
|
||
"OUT_B_00": "模型 B 输出层 00",
|
||
"OUT_B_01": "模型 B 输出层 01",
|
||
"OUT_B_02": "模型 B 输出层 02",
|
||
"OUT_B_03": "模型 B 输出层 03",
|
||
"OUT_B_04": "模型 B 输出层 04",
|
||
"OUT_B_05": "模型 B 输出层 05",
|
||
"OUT_B_06": "模型 B 输出层 06",
|
||
"OUT_B_07": "模型 B 输出层 07",
|
||
"OUT_B_08": "模型 B 输出层 08",
|
||
"OUT_B_09": "模型 B 输出层 09",
|
||
"OUT_B_10": "模型 B 输出层 10",
|
||
"OUT_B_11": "模型 B 输出层 11",
|
||
"Outer Fit (Shrink to Fit)": "贴合外边 (收缩以贴合)",
|
||
"outline inflating": "轮廓填充",
|
||
"Outpainting direction": "向外绘制的方向",
|
||
"output": "输出",
|
||
"Output": "输出",
|
||
"Output animation path": "动画输出路径",
|
||
"Output DepthMap": "保存深度图",
|
||
"Output directory": "输出目录",
|
||
"Output Directory": "输出目录",
|
||
"Output directory for grids": "网格图输出文件夹",
|
||
"Output directory for grids; if empty, defaults to two directories below": "网格图统一输出文件夹； 如果为空，则按以下两个文件夹分别输出",
|
||
"Output directory for images from extras tab": "后期处理输出文件夹",
|
||
"Output directory for images; if empty, defaults to three directories below": "统一输出文件夹； 如果为空，则按以下三个文件夹分别输出",
|
||
"Output directory for img2img grids": "图生图网格输出文件夹",
|
||
"Output directory for img2img images": "图生图输出文件夹",
|
||
"Output directory for txt2img grids": "文生图网格输出文件夹",
|
||
"Output directory for txt2img images": "文生图输出文件夹",
|
||
": Output extension (has no dot)": "输出扩展名 (没有 '.' 点)",
|
||
"Output filename": "输出文件名",
|
||
"Output filename format": "输出文件名格式",
|
||
"Output filename formats": "输出文件名格式",
|
||
"Output format": "输出格式",
|
||
"output height resolution": "输出高度分辨率",
|
||
"output images will be placed in a folder with this name ({timestring} token will be replaced) inside the img2img output folder. Supports params placeholders. e.g {seed}, {w}, {h}, {prompts}": "输出图像会置于图生图输出文件夹内含此名称的文件夹中。( {timestring} 这个词元会被替换) \n也支持参数占位符, 例如: {seed}, {w}, {h}, {prompts} 等",
|
||
"Output Image Width": "输出图像宽度",
|
||
"Output Mask directory": "蒙版输出目录",
|
||
"Output Mode": "输出模式",
|
||
"Output Model Name": "输出模型文件名",
|
||
"Output name": "输出名称",
|
||
"Output path": "输出路径",
|
||
"Output Paths": "输出路径",
|
||
"Output per image:": "单独输出每张图像：",
|
||
"output resolution": "输出分辨率",
|
||
"outputs": "输出",
|
||
"Output settings: all settings (including fps and max frames)": "输出设置：所有设置（包括帧率和最大帧数）",
|
||
"Output style": "输出类型",
|
||
"Output type": "输出类型",
|
||
"output video resolution": "输出视频的分辨率",
|
||
"Out Res": "输出分辨率",
|
||
"Overlap": "重叠",
|
||
"overlay": "叠加",
|
||
"Overlay mask": "覆盖蒙版",
|
||
"override:": "覆盖以下参数：",
|
||
"Override": "覆盖",
|
||
"Override `Denoising strength` to 1?": "覆写 `重绘幅度` 为 1?",
|
||
"Override options (choose the related subject type first for better results)": "覆盖选项 (首选相关的主题类型以获得更好的结果)",
|
||
"Override `prompt` to the same value as `original prompt`?(and `negative prompt`)": "覆写 `提示词` 为 `初始提示词`?` (反向提示词` 同理)",
|
||
"Override `Sampling method` to Euler?(this method is built for it)": "覆写 `采样方法` 为 Euler? (这个方法就是为它设计的)",
|
||
"Override `Sampling Steps` to the same value as `Decode steps`?": "覆写 `采样迭代步数` 为 `解码迭代步数`?",
|
||
"Override settings": "覆盖设置",
|
||
"overwrite": "允许覆盖",
|
||
"Overwrite": "覆写",
|
||
"Overwrite existing": "覆写已有项",
|
||
"Overwrite extracted frames": "覆盖已有帧",
|
||
"Overwrite image size": "覆盖图像尺寸",
|
||
"Overwrite input frames": "覆盖输入帧",
|
||
"Overwrite Old Embedding": "覆盖同名嵌入式模型文件",
|
||
"Overwrite Old Hypernetwork": "覆盖同名超网络文件",
|
||
"Overwrite priority": "覆盖优先级",
|
||
"Overwrite subject": "覆盖主题",
|
||
"Overwrite subject:": "覆盖主题:",
|
||
"Overwrite type of image:": "覆盖图像类型",
|
||
"Padding mode": "填充模式",
|
||
"Padding Mode": "填充模式",
|
||
"Padding options": "填充选项",
|
||
"Padding token (ID or single token)": "填充提示词(完整ID或者单个提示词)",
|
||
"Pad prompt/negative prompt to be same length": "补齐正向/反向提示词到相同长度",
|
||
"Pad the input images token length to this amount. You probably want to do this.": "把输入图像的词元长度填充到本选项设置长度。也许会有人有这个需求。",
|
||
"Pad Tokens": "词元填充",
|
||
"Page Index": "页码",
|
||
"painting": "painting (画作)",
|
||
"pan canvas left/right in degrees per frame": "以每帧为单位向左/向右偏移画布",
|
||
"Panorama to 3D mesh": "全景图转 3D 网格",
|
||
"Parameters to take from png info": "需要从 PNG 图片中提取的参数",
|
||
"Parse!": "解析",
|
||
"Parseq": "参数定序器 (parameter sequencer)",
|
||
"Parseq does": "参数定序器将",
|
||
"Parseq Manifest (JSON or URL)": "参数定序器配置文件（JSON 或者链接）",
|
||
"Parses instance prompts separated by the following characters [,;.!?], and prevents breaking up tokens when using the tokenizer. Useful if you have prompts separated by a lot of tags.": "解析被以下字符分隔的实例提示词 [,;.!?] ，并防止在使用词元分析器时将词元打乱。在有被大量字符分隔的提示词时十分有用。",
|
||
"Passing ControlNet parameters with \"Send to img2img\"": "使用\"发送到图生图\"时传输 ControlNet 参数",
|
||
"Password": "密码",
|
||
"paste": "粘贴",
|
||
"paste_append": "粘贴附件",
|
||
"Paste available values into the field": "将可用值粘贴到字段中",
|
||
"Path for saving your persistent settings file:": "持久性设置文件的保存路径",
|
||
"path name": "路径名",
|
||
"path_recorder": "路径记录",
|
||
"Path relative to the webui folder": "相对于 webui 文件夹的路径",
|
||
"Paths for saving": "保存路径",
|
||
"path/to/classify": "分类/路径",
|
||
"Path to directory containing annotator model directories (requires restart, overrides corresponding command line flag)": "预处理器模型 (annotator model) 的文件路径 (需重启，以覆盖相应的命令行标志)",
|
||
"Path to directory where to write outputs": "进行输出的目录路径",
|
||
"Path to directory with input images": "带有输入图像的目录路径",
|
||
"/path/to/images or /path/to/images/**/*": "/path/to/images 或 /path/to/images/**/*",
|
||
"Path to JSON file with concepts to train.": "用于训练的储存着概念的 JSON 文件路径",
|
||
"path/to/output": "输出/路径",
|
||
"Path to settings file you want to load. Path can be relative to webui folder OR full - absolute": "需要加载的设置文件路径。该路径可以相对于 SD-WebUI 根目录，也可以是完整的绝对路径",
|
||
"Pause": "暂停",
|
||
"Pause After N Epochs": "完成 N Epochs 后暂停",
|
||
"PBRemTools": "精确背景去除工具",
|
||
"performance": "性能",
|
||
"performance is measured in iterations per second (it/s) and reported for different batch sizes (e.g. 1, 2, 4, 8, 16...)": "性能以每秒多少迭代次数 (it/s) 作为单位，并按不同的单批数量 (如 1、2、4、8、16......) 进行报告。",
|
||
"Performance Wizard (WIP)": "性能向导 (未完成)",
|
||
"Perform warmup": "进行预热",
|
||
"perlin": "柏林 (perlin)",
|
||
"Perlin noise is a more natural looking noise. It is heterogeneous and less sharp than uniform noise, this way it is more likely that new details will appear in a more coherent way. This is the new default setting.": "柏林噪声是一种看起来更自然的噪声。与均匀噪点相比，它具有异质性且不那么锐利，这种方法可以以更加连贯的方式出现新的细节。这是新版本的默认设置。",
|
||
"Perlin octaves": "柏林噪声倍频",
|
||
"Perlin persistence": "柏林噪声递增幅度",
|
||
"per side": "每边数量",
|
||
"persistent cond cache": "持久化调整缓存",
|
||
"Persistent cond cache": "持久化调整缓存",
|
||
"Perspective": "透视",
|
||
"Perspective Flip": "透视翻转",
|
||
"Perspective flip gamma": "透视翻转伽马值",
|
||
"Perspective flip phi": "透视翻转角度（垂直）",
|
||
"Perspective flip theta": "透视翻转角度（水平）",
|
||
"Perspective flip tv": "透视翻转消失点",
|
||
"Phone": "电话",
|
||
"photograph": "photograph (照片)",
|
||
"photography": "photography (摄影)",
|
||
"Pick Subfolder and Model Version": "选择子目录与模型版本",
|
||
"Pics to Interpolate": "要插值的图像",
|
||
"pin_light": "点光",
|
||
"pipeline": "管线",
|
||
"Pipeline": "管线",
|
||
"Pix2Pix img CFG schedule": "Pix2Pix 图像 CFG 调度计划",
|
||
"Pixelize": "像素化",
|
||
"Pixel Perfect": "完美像素模式",
|
||
"Pixels to expand": "拓展的像素数",
|
||
"Place options in main UI into an accordion": "将选项置入主界面的一个手风琴式的容器中",
|
||
"Place this at back of generated prompt (suffix)": "此框填写的提示词放在生成提示词的后面 (后缀)",
|
||
"Place this in front of generated prompt (prefix)": "此框填写的提示词放在生成提示词的前面 (前缀)",
|
||
"Plain text / URL / Custom format": "纯文本 / URL / 自定义格式",
|
||
"Platform": "运行平台",
|
||
"Please add text prompts to generate masks": "请添加文本提示词以生成蒙版",
|
||
"Please always keep values in math functions above 0.": "请始终保证数学函数中的值大于 0",
|
||
"Please enable the following settings to use controlnet from this script.": "请启用以下设置，以保证可以在此脚本中调用ControlNet。",
|
||
"Please switch to 3D animation mode to view this section.": "请切换到 3D 动画模式来查看该部分",
|
||
"Please test on small images before actual upscale. Default params require denoise <= 0.6": "请在实际扩图前用小分辨率图像进行测试, 默认参数需求去噪强度小于或等于0.6",
|
||
"Please use smaller tile size when got CUDA error: out of memory.": "当出现 CUDA error: out of memory 时，使用更小的分块尺寸",
|
||
"Please use smaller tile size when see CUDA error: out of memory.": "当出现 CUDA error: out of memory 时，使用更小的尺寸大小",
|
||
"Plugin first": "扩展优先",
|
||
"PNG info": "PNG 图片信息",
|
||
"PNG Info": "PNG 图片信息",
|
||
"PNG info directory": "PNG 图片信息目录",
|
||
"PNGs": "图片（PNG格式）",
|
||
"point1 x": "X 轴点 1",
|
||
"point1 y": "Y 轴点 1",
|
||
"point2 x": "X 轴点 2",
|
||
"point2 y": "Y 轴点 2",
|
||
"point3 x": "X轴点 3",
|
||
"point3 y": "Y 轴点 3",
|
||
"points_per_batch": "每批采样点",
|
||
"points_per_side": "每边采样点",
|
||
"polylines_sharp": "多边形算法 - 锐利",
|
||
"polylines_soft": "多边形算法 - 柔和",
|
||
"Pooling Avg": "池化平均值",
|
||
"Pooling Max": "池化最大值",
|
||
"pop art": "pop art (波普艺术)",
|
||
"popular": "popular (流行艺术)",
|
||
", port for AUTOMATIC1111's webui maintained by": ", 是为 AUTOMATIC1111's webui 提供的插件项目，项目维护者: ",
|
||
"portrait": "portrait (肖像)",
|
||
"Pose": "姿势",
|
||
"Pose style": "姿态样式",
|
||
"Position (center to edge)": "位置 (中心到边缘)",
|
||
"Positioning the effect on the y-axis": "在 Y 轴定位效果",
|
||
"Position (left to right)": "位置 (从左到右)",
|
||
"Positions": "分区位置",
|
||
"positive": "正向",
|
||
"Positive Filter": "Positive 过滤器",
|
||
"Positive / Negative Prompts": "正向 / 反向提示词",
|
||
"Positive prompt mode": "正向提示词模式",
|
||
"positive prompt to be appended to *all* prompts": "正向提示词会被添加到所有提示词中",
|
||
"Postprocess": "后期处理",
|
||
"Postprocessing": "后期处理",
|
||
"Post Processing": "后期处理",
|
||
"Post-Processing": "后处理",
|
||
"Postprocessing operation order": "后处理操作顺序",
|
||
"Postprocess (latent)": "后期处理 (潜空间)",
|
||
"Precision": "精度",
|
||
"predicted_iou_threshold": "预测交并比阈值",
|
||
"pred_iou_thresh": "预测滤波阈值",
|
||
"Preferred weight": "推荐权重",
|
||
"Prefix": "前缀",
|
||
"prefix AND prompt + suffix": "prefix AND prompt + suffix (前缀 AND 提示词 + 后缀)",
|
||
"prefix + prefix + prompt + suffix": "prefix + prefix + prompt + suffix (前缀 + 前缀 + 提示词 + 后缀)",
|
||
"Preload images at startup for first tab": "在启动时为第一个选项卡预载图像",
|
||
"prepare ebsynth": "预处理 Ebsynth",
|
||
"prepend": "前置",
|
||
"Prepend": "添加到开头",
|
||
"Prepend additional tags": "将额外标签前置",
|
||
"preprocess": "预处理",
|
||
"Preprocess": "预处理",
|
||
"Preprocess images": "图像预处理",
|
||
"Pre-Processing": "预处理",
|
||
"Preprocessor": "预处理器",
|
||
"Preprocessor Preview": "预处理结果预览",
|
||
"Preprocessor resolution": "预处理器分辨率",
|
||
"Preprocessor Resolution": "预处理器分辨率",
|
||
"Prerequisites and Important Info:": "前提条件和重要信息：",
|
||
"Preset": "预设",
|
||
"Preset Manager": "预设管理器",
|
||
"Preset Name": "预设名",
|
||
"Presets": "预设",
|
||
"Preset Weights": "预设权重",
|
||
"Preset_Weights": "预设权重",
|
||
"Pretrained VAE Name or Path": "预训练 VAE 的名称或路径",
|
||
"Prev batch": "上一批",
|
||
"Prevent empty spots in grid (when set to autodetect)": "自动检测并消除网格图中的空位",
|
||
"Prevents overfit by clipping gradient norms. Default value is 0.0. Recommended value for Lora is 1.0": "通过裁剪梯度归一层防止过拟合。默认 0.0。推荐 Lora 使用 1.0 。",
|
||
"Prevent Stability-AI's ldm/sgm modules from printing noise to console.": "阻止 Stability-AI 的 ldm/sgm 模块向控制台打印垃圾信息",
|
||
"Preview annotator result": "预览预处理结果",
|
||
"Preview as Input": "预处理结果作为输入",
|
||
"Preview automatically when add/remove points": "添加/删除标记点时自动预览",
|
||
"Preview image negative prompt": "预览图反向提示词",
|
||
"Preview image prompt": "预览图提示词",
|
||
"Preview mask": "预览蒙版",
|
||
"Preview Segmentation": "预览分离结果",
|
||
"Preview segmentation image": "预览语义分割图像",
|
||
"Previous": "Previous (上一生成帧)",
|
||
"Prev Page": "上一页",
|
||
"Primary model (A)": "模型 A",
|
||
"primitivism": "primitivism (原始主义画派)",
|
||
"Print": "输出",
|
||
"Print a list of Textual Inversion embeddings when loading model": "加载模型时在控制台打印 Textual Inversion embeddings 模型列表信息",
|
||
"Print all deviations": "输出所有偏移量",
|
||
"print change": "打印变更",
|
||
"Print debug logs to the console": "将调试日志输出到控制台",
|
||
"Print extra hypernetwork information to console.": "将额外的超网络 (hypernetwork) 信息输出到控制台",
|
||
"Print image deletion messages to the console": "打印图像删除信息到控制台",
|
||
"Print warning logs to the console": "将警告信息输出到控制台",
|
||
"Prior Loss": "先验损失函数 (Prior Loss)",
|
||
"Prior Loss Target": "目标先验损失",
|
||
"Prior loss weight.": "先验损失权重",
|
||
"Prior Loss Weight": "先验损失权重",
|
||
"Process given file(s) under the input folder, seperate by comma": "指定在输入文件夹中要处理图像的文件名 (使用逗号隔开)",
|
||
"Process Hires. fix": "处理高清修复",
|
||
"Process images in a directory on the same machine where the server is running.": "处理服务器主机上某一目录里的图像",
|
||
"processing |": "处理中 |",
|
||
"Process Stage": "过程步骤",
|
||
"Process type": "处理类型",
|
||
"Produce an image that can be tiled.": "生成可用于平铺(tiled)的图像",
|
||
"(produce a tileable picture)": "(生成可衔接拼贴的图片)",
|
||
"Progressbar and preview update period": "进度条/预览图更新周期",
|
||
"Progressbar/preview update period, in milliseconds": "进度条/预览图更新周期 (毫秒)",
|
||
"Project": "项目",
|
||
"Project directory": "工程目录（不可包含中文、下换线和特殊符号）",
|
||
"project setting": "工程设置",
|
||
"prompt": "正向提示词",
|
||
"Prompt": "提示词",
|
||
"prompt 1": "提示词①",
|
||
"prompt 2": "提示词②",
|
||
"prompt 4": "提示词④",
|
||
"prompt 5": "提示词⑤",
|
||
"Prompt attention parser": "提示词注意力解析器",
|
||
"Prompt Changes": "提示词调整",
|
||
"Prompt compounder": "提示词混合",
|
||
"Prompt-Ex": "提示词-Ex",
|
||
"Prompt fields": "提示词段",
|
||
"Prompt for face": "针对脸部的提示词",
|
||
"Prompt for Face": "脸部提示词",
|
||
"Prompt for hires fix pass.\nLeave empty to use the same prompt as in first pass.": "用于高分修复层的正向提示词\n留空以使用与第一层相同的提示词",
|
||
"Prompt for upscale (added to generation prompt)": "用于放大的正向提示词 (追加到生成提示词后)",
|
||
"prompting": "提示词相关",
|
||
"Prompt Magic": "魔法提示词",
|
||
"Prompt matrix": "Prompt matrix (提示词矩阵)",
|
||
"Prompt mode": "提示词模式",
|
||
"Prompt Mode": "提示词模式",
|
||
"Prompt mode guide": "提示词模式指南",
|
||
"Prompt (press Ctrl+Enter or Alt+Enter to generate)": "正向提示词 (按 Ctrl+Enter 或 Alt+Enter 开始生成)\nPrompt",
|
||
"Prompts": "提示词",
|
||
"Prompts are stored in JSON format. If you've got an error, check it in a": "提示词以 JSON 格式存储。如果有错误，请在 ",
|
||
"Prompts are stored in JSON format. If you've got an error, check it in the validator,": "提示词以 JSON 格式保存。如有误，请前往校验器检查: ",
|
||
"Prompts are stored in JSON format. If you've got an error, check it in validator,": "提示词以 JSON 格式存储。如果您有错误，请在验证器中检查，",
|
||
"Prompt seperator": "提示词分隔符",
|
||
"Prompt seperator mode": "提示词分隔模式",
|
||
"prompts for your animation in a JSON format. Use --neg words to add 'words' as negative prompt": "动画的提示词以 JSON 格式储存。使用 --neg 字段去添加反向提示词",
|
||
"Prompts from file or textbox": "从文本框或文件载入提示词",
|
||
"Prompts from png info will be appended to prompts set in ui.": "从 PNG 图片信息中提取的提示词会在 UI 中原有的提示词后添加",
|
||
"Prompts negative": "反向提示词",
|
||
"Prompts positive": "正向提示词",
|
||
"Prompt template": "提示词模板",
|
||
"Prompt Translator": "提示词翻译器",
|
||
"Prompt, will append to your t2i prompt": "追加提示词",
|
||
"Prompt word wrap length limit": "提示词换组长度限制",
|
||
"Provider": "提供方",
|
||
"Proxy": "代理",
|
||
"Pruning Methods": "模型修剪",
|
||
"psychedelic": "psychedelic (迷幻艺术)",
|
||
"Pure Noise": "纯噪声",
|
||
"Push File To 🤗": "将文件推送到 🤗",
|
||
"Push File to 🤗 Hugging Face": "将文件推送到 🤗 Hugging Face",
|
||
"Push Folder To 🤗": "将文件夹推送到 🤗",
|
||
"Push Folder to 🤗 Hugging Face": "将文件夹推送到 🤗 Hugging Face",
|
||
"Put variable parts at start of prompt": "把可变部分放在提示词文本的开头",
|
||
"Put weight sets. float number x 25": "输入权重，共 25 个浮点数，逗号分隔",
|
||
"quad": "二阶 (quad)",
|
||
"Quality": "质量",
|
||
"Quality for saved jpeg images": "保存 JPEG 图片的质量",
|
||
"Quality Gate": "质量把关",
|
||
"Quantize": "量化",
|
||
"query": "查询",
|
||
"queue:": "排队中: ",
|
||
"Queue front": "添加到队列前",
|
||
"quick": "快速",
|
||
"Quick": "快速设置",
|
||
"Quick batch": "快速批处理",
|
||
"Quick Guide": "快速指引",
|
||
"Quick Save": "快速保存",
|
||
"Quicksettings list": "快捷设置列表",
|
||
"Quicksettings position": "快速设置位置",
|
||
"random": "随机",
|
||
"Random choices": "随机选择",
|
||
"Randomly decide to flip images horizontally.": "随机决定是否水平翻转图像。",
|
||
"Randomly selects a keyword from the prompt and adds emphasis to it. Try this with Fixed Seed enabled.": "随机强调提示词中的一个关键词，启用前要启用固定种子",
|
||
"Random Mode": "随机模式",
|
||
"Randomness": "随机度",
|
||
"Random number generator source.": "随机数生成来源",
|
||
"Random number generator source. Changes seeds drastically. Use CPU to produce the same picture across different vidocard vendors.": "随机数的生成来源。大幅度改变种子。使用CPU来在不同型号显卡间产生相同的图像",
|
||
"Random prompt": "随机提示词",
|
||
"range": "范围",
|
||
"Range": "范围",
|
||
"ranking": "评分",
|
||
"ranking filter": "按图片评分过滤",
|
||
"Ranking filter": "评分过滤器",
|
||
"rating": "评分",
|
||
"Rating": "评分",
|
||
"Rating confidences": "评分置信度",
|
||
"Rating confidents": "评分置信度",
|
||
"Ratings and included tags": "评分并包含标签",
|
||
"Read Caption from Selected Image": "从选择的图片中读取描述",
|
||
"Read generation parameters from prompt or last generation if prompt is empty into user interface.": "从提示词或上次生成的图片中读取生成参数",
|
||
"read_last_image": "载入上次图像",
|
||
"read_last_settings": "载入上次设置",
|
||
"README": "README",
|
||
"*READ ME before you use this mode!*": "*请在使用前认真阅读*",
|
||
"read metadata": "读取元数据",
|
||
"Read metadata from selected checkpoints": "从所选模型中读取元数据",
|
||
"Read parameters (prompt, etc...) from txt2img tab when making previews": "进行预览时，从文生图选项卡中读取参数（提示词等）",
|
||
"Read prompts from text boxes": "读取文本框中的提示词",
|
||
"Read tabular commands": "读取 tabular 命令",
|
||
"Read tags from text files": "从文本文件中读取提示词",
|
||
"realism": "realism (现实主义)",
|
||
"reallybigname": ": reallybigname",
|
||
"Reapply ranking after moving files": "移动文件后重新评分",
|
||
"Rebuild exif cache": "重建 EXIF 缓存",
|
||
"Recipe": "配方",
|
||
"recombine ebsynth": "重组 Ebsynth",
|
||
"Recommended settings: Sampling Steps: 80-100, Sampler: Euler a, Denoising strength: 0.8": "推荐设置: 采样迭代步数: 80-100, 采样器: Euler a, 重绘幅度: 0.8",
|
||
"Recommended to set tile sizes as large as possible before got CUDA error: out of memory.": "建议在得到 CUDA error: out of memory 报错前尽可能大的设置编码器分块大小",
|
||
"Recommend enabling the following settings.": "建议启用以下设置：",
|
||
"Reconstruct prompt from existing image and put it into the prompt field.": "从现有的图像中重构出提示词，并将其放入提示词的输入文本框",
|
||
"Recreate hash for existing files": "为已存在文件重建哈希",
|
||
"Rectangular": "矩形",
|
||
"Recursively search for wildcards": "递归检索通配符",
|
||
"red-cyan-anaglyph": "红蓝浮雕效果",
|
||
"red/green/blue": "red(红)/green(绿)/blue(蓝)",
|
||
"Redo generation": "重做生成",
|
||
"Re-enable the bug that trained the tenc embedding layer for LoRA.": "重新启用 LoRA 训练文本编码器 (tenc) 嵌入层的错误。",
|
||
"Reference": "Reference (参考)",
|
||
"reference_adain": "reference_adain (仅参考输入图 - 自适应实例规范)",
|
||
"reference_adain+attn": "reference_adain+attn (仅参考输入图 - 自适应实例规范 + Attention链接)",
|
||
"reference_only": "reference_only (仅参考输入图)",
|
||
"Ref image (for conviently locate regions)": "参考图（用于方便定位区域）",
|
||
"Refiner checkpoint": "Refiner 模型",
|
||
"Refiner switch at": "Refiner 切换时机",
|
||
"reflection": "反射",
|
||
"reflection will attempt to approximate the image and tile/repeat pixels": "反射模式下会尝试近似图像并平铺/重复像素",
|
||
"refresh": "刷新",
|
||
"Refresh": "刷新",
|
||
"Refresh all checkpoint preview info": "刷新所有模型预览信息",
|
||
"Refresh Civitai Helper": "刷新 Civitai 助手",
|
||
"Refresh Civitai Helper's additional buttons": "刷新 Civitai 助手的附加按钮",
|
||
"Refresh Civitai Helper's model card buttons": "刷新 Civitai 助手 的模型卡片按钮",
|
||
"Refresh data": "刷新数据",
|
||
"Refresh extension list": "刷新扩展列表",
|
||
"Refresh models": "刷新模型列表",
|
||
"Refresh openOutpaint": "刷新 openOutpaint",
|
||
"Refresh page": "刷新页面",
|
||
"Refresh Style": "刷新样式",
|
||
"Refresh TAC temp files": "刷新 TAC 缓存文件",
|
||
"Refresh wildcards": "刷新通配符",
|
||
"Regenerate": "重新生成",
|
||
"regex - e.g. ^(?!.*Hires).*$": "正则表达式 - 如 ^(?!.*Hires).*$",
|
||
"Region": "区域数",
|
||
"Region 1": "区域 1",
|
||
"Region 2": "区域 2",
|
||
"Region 3": "区域 3",
|
||
"Region 4": "区域 4",
|
||
"Region 5": "区域 5",
|
||
"Region 6": "区域 6",
|
||
"Region 7": "区域 7",
|
||
"Region 8": "区域 8",
|
||
"Region Prompt Control": "分区提示词控制",
|
||
"Regions": "分区",
|
||
"Regular expression; if weights's name matches it, the weights is not written to the resulting checkpoint. Use ^model_ema to discard EMA weights.": "输入正则表达式。键名匹配该表达式的权重将从最终合并模型中剔除。使用 ^model_ema 可剔除 EMA 权重。",
|
||
"Regular expression pattern for blocking terms out of the generated prompt. Applied case-insensitively. For instance, to block both \"purple\" and \"interdimensional\", you could use the pattern \"purple|interdimensional\".": "用于从生成的提示词中阻止术语的正则表达式模式。 不区分大小。 例如，要禁用“purple”和“interdimensional”，你可以使用格式“purple|interdimensional”。",
|
||
"Related to original file": "与原始文件相关",
|
||
"Related to output file": "与输出文件相关",
|
||
"Relative": "相对",
|
||
"Release notes": "发布注释",
|
||
"Reload Cache List": "重载缓存列表",
|
||
"Reload checkpoint": "刷新模型列表",
|
||
"Reload Checkpoints": "重新加载模型",
|
||
"🔄 Reload ComfyUI interfaces (client side)": "🔄 重载 ComfyUI 界面 (客户端)",
|
||
"Reload custom script bodies (No ui updates, No restart)": "重新加载自定义脚本主体（不进行界面更新及重启）",
|
||
"Reloading...": "正在重新加载...",
|
||
"Reload Presets": "重载预设",
|
||
"Reload/Save Settings (config.json)": "重新载入/保存设置 (config.json)",
|
||
"Reload scripts": "重载脚本",
|
||
"Reload settings": "重新载入设置",
|
||
"Reload Tags": "重载标签",
|
||
"Reload the last SD checkpoint back into VRAM": "重新将上次使用的 Stable Diffusion 模型加载到显存中",
|
||
"Reload UI": "重载 UI",
|
||
"Reload UI needed to apply": "需重载前端",
|
||
"Reloat List": "重新加载列表",
|
||
"remake dimension": "重制维度",
|
||
"Remember this choice?": "记住这个选择？",
|
||
"Remote": "远程",
|
||
"➖ Remove": "➖ 移除",
|
||
"Remove": "移除",
|
||
"Remove all point prompts": "移除所有标记点",
|
||
"Remove Auto Trans": "移除自动翻译",
|
||
"Remove background": "移除背景",
|
||
"Remove background image": "移除背景图片",
|
||
"Remove duplicated tag": "删除重复标签",
|
||
"Remove duplicate prompts": "删除重复提示词",
|
||
"Remove duplicate tags": "移除重复标签",
|
||
"Remove empty prompts": "删除空提示词",
|
||
"Remove from saved directories": "从已保存的目录中移除",
|
||
"Remove last": "删除最后一条",
|
||
"Remove motion module from any memory": "从内存卸载动画模型",
|
||
"Remove occluded edges": "移除遮挡边缘",
|
||
"Remove selected": "移除当前选择的图片",
|
||
"Remove selected tags": "移除选中标签",
|
||
"Remove selection [Delete]": "移除选择 [删除]",
|
||
"renaissance": "renaissance (文艺复兴)",
|
||
"Rename keyframes.": "重命名关键帧。",
|
||
"Renoise kernel size": "重铺噪声大小",
|
||
"Renoise strength": "重铺噪声强度",
|
||
"repeats the edge of the pixels, and extends them. Animations with quick motion may yield lines where this border function was attempting to populate pixels into the empty space created.": "重复并延长像素的边缘。快速运动镜头类型的动画可能会产生线条，边界函数会试图将像素填充到创建的空隙中",
|
||
"Replace new-line character with comma": "用逗号替换换行符",
|
||
"Replace or save the selected component.": "替换或保存所选组件",
|
||
"Replace preview": "替换预览图像",
|
||
"replace preview image with currently selected in gallery": "用当前网页输出中选中的图像替换预览图像",
|
||
"-> Replace tag, ..": "-> 替换标签, ..",
|
||
"Replace Text": "替换文本",
|
||
"Replace underscores with spaces on insertion": "插入时用空格替换下划线",
|
||
"Replace '_' with ' '(Does not affect the function to add tokens using add_token.txt.)": "用空格替换下划线（不影响使用 add_token.txt 添加 Token 的功能）",
|
||
"replicate": "复制",
|
||
"Report a bug": "反馈问题",
|
||
"Request browser notifications": "请求浏览器通知权限",
|
||
"(requires Reload UI)": "(需要重载 UI)",
|
||
"(requires restart)": "(需要重启)",
|
||
"(Requires the": "(需要安装 ",
|
||
"Requires the": "需要安装 ",
|
||
"reroll": "回滚",
|
||
"Reroll blank frames": "回滚空白帧",
|
||
"Reroll patience": "回滚最大次数",
|
||
"Re-run your combinatorial batch this many times with a different seed each time.": "每次使用不同的种子重新进行提示词组合处理的批次。",
|
||
"Reserved: total amout of video memory allocated by the Torch library ": "预留：Torch 库分配的显存总量",
|
||
"reset": "重置",
|
||
"↻ Reset": "↻ 重置",
|
||
"Reset": "重置",
|
||
"🎥 Reset Camera": "🎥 重置镜头",
|
||
"reset current": "重置为当前",
|
||
"reset default": "重置为默认",
|
||
"Reset default (Reload UI needed to apply)": "重置为默认值（需重载UI）",
|
||
"Reset mixer": "重置合并设置",
|
||
"🧍 Reset Pose": "🧍 重置姿态",
|
||
"Reset Tile Size": "重置区块大小",
|
||
"Reset Zoom": "重置缩放",
|
||
"Reset zoom and canvas positon": "重置缩放倍数和画布位置",
|
||
"resizable": "可缩放",
|
||
"resize": "缩放",
|
||
"Resize": "缩放比例",
|
||
"Resize and fill": "缩放后填充空白",
|
||
"Resize and Fill": "缩放后填充空白",
|
||
"Resize by": "重绘尺寸倍数",
|
||
"Resize height to": "将高度调整为",
|
||
"Resize image to target resolution. Unless height and width match, you will get incorrect aspect ratio.": "将图像大小调整为目标分辨率。除非高度和宽度匹配，否则你将获得不正确的纵横比",
|
||
"Resize mode": "缩放模式",
|
||
"Resize Mode": "缩放模式",
|
||
"Resize seed from height": "从高度中调整种子",
|
||
"Resize seed from width": "从宽度中调整种子",
|
||
"Resizes image to this height. If 0, height is inferred from either of two nearby sliders.": "将图像调整到此高度。如果为0，则从附近的两个滑块中的任意一个推断其高度。",
|
||
"Resizes image to this width. If 0, width is inferred from either of two nearby sliders.": "将图像调整到此宽度。如果为0，则从附近的两个滑块中的任意一个推断其宽度。",
|
||
"Resize the image so that entirety of image is inside target resolution. Fill empty space with image's colors.": "调整图像大小，使整个图像位于目标分辨率内\n用图像的颜色填充空白区域",
|
||
"Resize the image so that entirety of target resolution is filled with the image. Crop parts that stick out.": "调整图像大小，使整个目标分辨率都被图像填充\n裁剪多余部分",
|
||
"Resize to": "重绘尺寸",
|
||
"Resize width to": "将宽度调整为",
|
||
"Resizing objective": "缩放设置",
|
||
"Resolution": "分辨率",
|
||
"Resolution:": "分辨率:",
|
||
"Resolutions:": "分辨率:",
|
||
"Resources": "其他资料",
|
||
"Restart debug": "重启调试",
|
||
"Restart server": "重启服务器",
|
||
"Restart UI": "重载前端",
|
||
"Restore defaults": "恢复默认",
|
||
"Restore Face": "面部修复",
|
||
"Restore faces": "面部修复",
|
||
"Restore Faces": "面部修复",
|
||
"Restore faces after ADetailer": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 10th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 2nd": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 3rd": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 4th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 5th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 6th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 7th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 8th": "在 After Detailer 之后修复面部",
|
||
"Restore faces after ADetailer 9th": "在 After Detailer 之后修复面部",
|
||
"Restore Faces, Tiling & more": "面部修复，平铺图等更多选项",
|
||
"Restore Last Scene": "恢复上次场景",
|
||
"Restore low quality faces using GFPGAN neural network": "使用 GFPGAN 神经网络修复低质量面部",
|
||
"Restore progress": "恢复进程",
|
||
"Restore Selected Config": "恢复所选配置",
|
||
"Restore settings to default": "恢复至默认设置",
|
||
"Restore visibility": "面部修复强度",
|
||
"Result = A": "结果 = A",
|
||
"Result = A * (1 - M) + B * M": "结果 = A * (1 - M) + B * M",
|
||
"Result = A + (B - C) * M": "结果 = A + (B - C) * M",
|
||
"Result = \"A, B, C, X, Y\" (add X and Y to the end (default))": "结果 = \"A, B, C, X, Y\" （将 X 和 Y 添加至末尾(默认)）",
|
||
"Results": "结果",
|
||
"Result = \"X, C, E\" (A->\"\", B->X, D->\"\")": "结果 = \"X, C, E\" (A->\"\", B->X, D->\"\")",
|
||
"Result = \"X, Y, A, B, C\" (add X and Y to the beginning (\"Prepend additional tags\" checked))": "结果 = \"X, Y, A, B, C\" （将 X 和 Y 添加至开头(请勾选“将 tags 添加至开头”)）",
|
||
"Result = \"Y, Y, X, C\" (B->X, A->Y)": "结果 = \"Y, Y, X, C\" (B->X, A->Y)",
|
||
"Resume Animation": "恢复制作动画过程",
|
||
"Resume from timestring": "从时间字符串中恢复",
|
||
"Resume & Run from file": "恢复动画与加载设置",
|
||
"Resume timestring": "恢复开始的时间字符串",
|
||
"Retouch": "修复程度",
|
||
"Return mask": "回送蒙版",
|
||
"Reuse original image": "复用原图",
|
||
"Reuse seed from last generation, mostly useful if it was randomed": "使用上一次生成所用的随机数种子，用于复现结果",
|
||
"Reuse seed from last generation, mostly useful if it was randomized": "使用上一次生成所用的随机数种子，用于复现结果",
|
||
"Reverse model sort order": "逆序排序",
|
||
"rgb": "RGB",
|
||
"RGB to BGR": "RGB 转 BGR",
|
||
"rho": "rho (噪声密度)",
|
||
"RIFE v4.6 and FILM.": "RIFE v4.6 和 FILM.",
|
||
"right": "右",
|
||
"right-left": "右 - 左",
|
||
"roll canvas clockwise/anticlockwise": "顺时针/逆时针滚动画布",
|
||
"Roll Channels": "颜色通道轮替",
|
||
"Rolling factor": "梯度放大倍数",
|
||
"romanticism": "romanticism (浪漫主义)",
|
||
"rotate canvas clockwise/anticlockwise in degrees per frame": "以每帧多少度数顺时针/逆时针旋转画布",
|
||
"Rotate images (clockwise)": "旋转图像 (顺时针)",
|
||
"Rotation 3D X": "3D 翻转 X",
|
||
"Rotation 3D Y": "3D 翻转 Y",
|
||
"Rotation 3D Z": "3D 翻转 Z",
|
||
"run": "运行",
|
||
"Run": "运行",
|
||
"Run benchmark": "运行基准测试",
|
||
"run command": "运行命令",
|
||
"run from a list of setting .txt files. Upload them to the box on the right (visible when enabled)": "从TXT设置文件列表加载。上传它们到右侧框内 (启用后可见)",
|
||
"Run from Settings file": "加载配置文件",
|
||
"Run Merge": "开始合并",
|
||
"running benchmark may take a while. extensive tests may result in gpu out-of-memory conditions.": "运行基准测试需要花费大量时间。大量测试可能会导致 GPU 显存溢出。",
|
||
"Running ebsynth.(on your self)": "运行 Ebsynth。（自行操作）",
|
||
"Run on incomplete": "中断后仍然运行",
|
||
"Run preprocessor": "运行预处理",
|
||
"Run: Sampler, Width, Height, tiling, resize seed.": "运行参数： 采样器，宽度，高度，平铺图，种子大小调整",
|
||
"Run: seed, subseed, subseed strength.": "运行参数：第二种子，第二种子强度",
|
||
"😭 SadTalker: Learning Realistic 3D Motion Coefficients for Stylized Audio-Driven Single Image Talking Face Animation (CVPR 2023)": "😭 SadTalker: 通过学习 3D 运动参数来制作的风格化音频驱动单图脸部说话动画 (CVPR 2023)",
|
||
"safetensors": "safetensors",
|
||
"SAG Mask Threshold": "SAG 蒙版阈值",
|
||
"same to Strength": "与强度相同",
|
||
"SAM Model": "SAM 模型",
|
||
"Sample Batch Size": "样本图像单批数量 (Batch Size)",
|
||
"Sample CFG Scale": "样本无分类器引导系数(CFG Scale)",
|
||
"Sample Height": "样本图像高度",
|
||
"Sample Image Generation": "样本图像生成",
|
||
"Sample Image Prompt": "样本图像的正向提示词",
|
||
"Sample Negative Prompt": "样本图像的反向提示词",
|
||
"Sample Prompt": "样本图像正向提示词",
|
||
"Sample Prompt File": "样本图像提示词文件",
|
||
"Sample Prompts": "样本提示词",
|
||
"Sample Prompt Template File": "样本图像提示词模板文件",
|
||
"sampler": "采样器",
|
||
"Sampler": "采样方法",
|
||
"Sampler parameters": "采样方法参数",
|
||
"Sampler schedule": "采样方法调度计划",
|
||
"Sampler Settings": "采样器设置",
|
||
"Sample Seed": "样本种子",
|
||
"Sample Steps": "样本迭代步数",
|
||
"Sample Width": "样本图像宽度",
|
||
"Sampling method": "采样方法 (Sampler)",
|
||
"Sampling settings": "采样器设置",
|
||
"Sampling steps": "迭代步数 (Steps)",
|
||
"Sampling Steps": "迭代步数 (Steps)",
|
||
"SAM requires an input image. Please upload an image first.": "SAM 需要你先上传一张图片。",
|
||
"Sanity Sample Negative Prompt": "合理性样本反向提示词",
|
||
"Sanity Sample Prompt": "合理性样本正向提示词",
|
||
"Sanity Samples": "合理性采样样本",
|
||
"Sanity Sample Seed": "合理性样本种子",
|
||
"saturation": "饱和度",
|
||
"Saturation": "饱和度",
|
||
"save": "保存",
|
||
"💾 Save": "💾 保存",
|
||
"Save": "保存",
|
||
"Save 3D depth maps": "保存 3D 深度图",
|
||
"Save a checkpoint every N epochs.": "每 N Epochs 保存一次模型",
|
||
"Save a copy of embedding to log directory every N steps, 0 to disable": "每 N 步将 Embedding 的副本保存到日志目录，0 表示禁用",
|
||
"Save a copy of image before applying color correction to img2img results": "在对图生图结果应用颜色校正之前保存图像副本",
|
||
"Save a copy of image before applying highres fix.": "在进行高分辨率修复前保存初始图像副本",
|
||
"Save a copy of image before doing face restoration.": "在进行面部修复前保存图像副本",
|
||
"Save all changes": "保存所有更改",
|
||
"Save an csv containing the loss to log directory every N steps, 0 to disable": "每 N 步保存一个包含 loss 的 csv 表格到日志目录，0 表示禁用",
|
||
"Save and Test Webhook": "保存并测试 Webhook",
|
||
"Save an image to log directory every N steps, 0 to disable": "每 N 步保存一张图像到日志目录，0 表示禁用",
|
||
"save animation's depth maps as extra files": "额外保存动画深度图文件",
|
||
"save anime gif": "保存 GIF 动画",
|
||
"Save an .srt (subtitles) file with the generation info along with each animation": "随动画保存包含生成信息的.srt (字幕) 文件",
|
||
"Save as": "保存为",
|
||
"save as csv": "保存为 csv",
|
||
"Save as csv(default)": "保存为 csv (默认)",
|
||
"Save as float16": "储存半精度 (float16) 模型",
|
||
"Save as half": "保存半精度模型",
|
||
"Save as safetensors": "存为 SafeTensors 格式",
|
||
"save as txt": "保存为 txt",
|
||
"Save as txt": "保存为 txt",
|
||
"Save background instead of foreground": "保存背景而不是前景",
|
||
"Save Caption to .txt File": "储存描述文本为 .txt 文件",
|
||
"Save category (Windows only)": "保存类别 (仅限 Windows 系统)",
|
||
"Save changes": "保存更改",
|
||
"Save Checkpoint to Subdirectory": "保存模型到子目录",
|
||
"Save Controlnet Data in ...": "保存 ControlNet 数据到...",
|
||
"Save copy of large images as JPG": "将超过大小限制的图像保存JPG副本",
|
||
"save csv": "保存 CSV ",
|
||
"Save Current Config": "保存当前配置",
|
||
"Save current settings": "保存当前设置",
|
||
"Save current settings as default": "将当前设置保存为默认值",
|
||
"Saved Configs": "已保存的配置",
|
||
"Saved directories": "已保存的路径",
|
||
"Save depth map": "保存深度图",
|
||
"Save DepthMap": "保存深度图",
|
||
"Save depth maps": "保存深度图",
|
||
"Save EMA Weights to Generated Models": "保存 EMA 权重到生成的模型",
|
||
"Save every n epochs": "每 n 个 epoch 保存一次",
|
||
"Save generated images within tensorboard.": "在 tensorboard 中保存所生成的图像",
|
||
"Save generation params text": "保存生成参数文本文件",
|
||
"Save grids to a subdirectory": "将网格图保存到子目录",
|
||
"Save images before ADetailer": "在进行后期细节修复前保存原始生成图片",
|
||
"(save images that has been interrupted in mid-generation; even if not saved, they will still show up in webui output.)": "(保存生成时被中断的图像; 即使没有保存, 他们依旧会显示在 webui 输出中)",
|
||
"Save images to a subdirectory": "将图像保存到子目录",
|
||
"Save images with embedding in PNG chunks": "保存嵌入 Embedding 模型的 PNG 图片",
|
||
"Save incomplete images": "保存未完成的图像",
|
||
"Save init images when using img2img": "使用图生图时保存初始图像",
|
||
"Save JSON": "保存为 JSON 格式",
|
||
"Save mask": "保存蒙版",
|
||
"Save masked image": "保存蒙版后图像",
|
||
"Save mask previews": "保存蒙版预览",
|
||
"save merged model ID to": "保存合并模型 ID 到",
|
||
"save metadata": "保存元数据",
|
||
"Save metadata": "保存元数据",
|
||
"Save Metadata": "保存元数据",
|
||
"Save metadata as caption": "将元数据保存为描述文本",
|
||
"Save metadata (.safetensors only)": "保存元数据 (仅限 .safetensors)",
|
||
"save model": "保存模型",
|
||
"Save Model Frequency (Epochs)": "保存模型的频率 (Epochs)",
|
||
"Save Only": "仅保存",
|
||
"Save Original": "保存原件",
|
||
"Save original image": "保存原始图像",
|
||
"Save original image if face detection fails": "若面部检测失败则保存原始图像",
|
||
"Save original image with mask and bounding box": "保存带有蒙版和箱体的原始图像",
|
||
"Save Outputs": "保存输出结果",
|
||
"Save PNG": "保存为 PNG 格式",
|
||
"💾🧍 Save Pose": "💾🧍 保存姿态",
|
||
"save precision": "保存精度",
|
||
"Save preprocessed": "保存预处理",
|
||
"Save Preset": "保存预设",
|
||
"Save Presets": "保存预设",
|
||
"Save preview": "保存预览",
|
||
"Save Preview(s) Frequency": "保存预览图的频率",
|
||
"Save Preview(s) Frequency (Epochs)": "保存预览图的频率 (Epochs)",
|
||
"Save prompts as text file": "保存提示词到文本文件",
|
||
"Save ranking in image's pnginfo": "在PNG图片信息中保存评分",
|
||
"Save & Restart": "保存并重启",
|
||
"Save Scene": "保存场景",
|
||
"Save score as EXIF or PNG Info Chunk": "保存分数为 EXIF 或 PNG 文本信息区块中",
|
||
"Save separate diffusers snapshots when saving during training.": "训练时单独保存 diffusers 快照",
|
||
"Save separate diffusers snapshots when training completes.": "训练完成时单独保存 diffusers 快照",
|
||
"Save separate diffusers snapshots when training is canceled.": "手动取消训练时保存一个 diffusers 快照",
|
||
"save setting": "保存设置",
|
||
"Save Setting": "保存设置",
|
||
"save settings": "储存设置",
|
||
"Save Settings": "保存设置",
|
||
"Saves Optimizer state as separate *.optim file. Training of embedding or HN can be resumed with the matching optim file.": "将优化器状态保存为单独的 optim 文件。在训练嵌入式模型或者超网格化模型时可以根据匹配上的 optim 文件恢复训练进度",
|
||
"Save style": "将当前提示词储存为预设样式",
|
||
"Save Style": "保存样式",
|
||
"save successful": "保存成功",
|
||
"Save tags (Windows only)": "保存标签 (仅限 Windows 系统)",
|
||
"Save template to metadata: Write prompt template into the PNG metadata": "保存模板到元数据：将提示词模板写入到 PNG 图片元数据中",
|
||
"Save text information about generation parameters as chunks to png files": "将图片生成参数保存到 PNG 文件中",
|
||
"Save textual inversion and hypernet settings to a text file whenever training starts.": "每次训练开始时保存 TI 和 Hypernetwork 设置到文本文件中",
|
||
"Save the image to a dedicated directory (log/images).": "保存图像到指定目录 (默认: log/images)",
|
||
"Save to Presets": "保存到预设",
|
||
"Save to tags files": "保存标签到文件",
|
||
"Save vector to text file": "将向量保存到文本文件",
|
||
"Save wildcards": "保存通配符",
|
||
"Save with JSON": "保存为 JSON 格式",
|
||
"Save zip archive with images to a dedicated directory (log/images)": "保存包含图像的 .zip 文件到指定目录 (默认: log/images)",
|
||
"Saving": "存储",
|
||
"Saving images/grids": "图像保存",
|
||
"Saving to a directory": "保存到文件夹",
|
||
"Scale": "尺度",
|
||
"Scale by": "缩放倍数",
|
||
"Scale Factor": "放大倍数",
|
||
"Scale Prior Loss": "先验损失规模",
|
||
"scale the canvas size, multiplicatively. [static = 1.0]": "缩放画布大小, 系数倍乘 [static = 1.0]",
|
||
"Scale to": "缩放到",
|
||
"Scan": "扫描",
|
||
"Scan Exif-/.txt-data (initially slower, but required for many features to work)": "扫描图片的 Exif 信息与同名 txt 数据文件（初始读取速度较慢，许多功能都需要需要本选项启用）",
|
||
"Scan Models for Civitai": "扫描并匹配 Civitai 模型记录",
|
||
"Scanning takes time, just wait. Check console log for detail": "扫描需要一段时间，请耐心等待。检查控制台日志以查看详情。",
|
||
"scene": "scene (情景)",
|
||
"schedule": "参数表",
|
||
"Schedule controls how much the composite video is mixed in, whether set to mask is None or using a mask. This is the master mix.": "调度计划控制复合视频的混合比例，无论是否使用蒙版。这是主混合设置。",
|
||
"Scheduler": "调度器",
|
||
"scheduler type": "调度器类型",
|
||
"Scheduler type": "调度器类型",
|
||
"science": "科技学术",
|
||
"sci-fi": "sci-fi (科幻电影)",
|
||
"Scoring type": "评分类型",
|
||
"screen": "屏幕",
|
||
"Scribble": "Scribble (涂鸦)",
|
||
"scribble_hed": "scribble_hed (涂鸦 - 合成)",
|
||
"scribble_pidinet": "scribble_pidinet (涂鸦 - 手绘)",
|
||
"scribble_xdog": "scribble_xdog (涂鸦 - 强化边缘)",
|
||
"script": "脚本",
|
||
"Script": "脚本",
|
||
"Script Enabled": "启用脚本",
|
||
"Script first": "脚本优先",
|
||
"Script names to apply to ADetailer (separated by comma)": "应用于 After Detailer 的脚本名称 (用逗号分隔)",
|
||
"scroll": "滚动",
|
||
"sculpture": "sculpture (雕塑)",
|
||
"sd_model_hash": "SD 模型哈希值",
|
||
"sd-parseq manifest": "sd-parseq 配置文件",
|
||
"SD VAE": "外挂 VAE 模型",
|
||
"SD VAE: refresh": "SD VAE: 刷新",
|
||
"SDXL high aesthetic score": "SDXL 美学分数高值",
|
||
"SDXL low aesthetic score": "SDXL 美学分数低值",
|
||
"Seams denoise strenght": "接缝重绘幅度",
|
||
"Seams fix": "接缝修复",
|
||
"Seams Mask blur (offset pass only)": "接缝蒙版边缘模糊程度 (仅偏移层)",
|
||
"Seams padding": "接缝填充度",
|
||
"Seams Width": "接缝宽度",
|
||
"search": "检索",
|
||
"Search": "搜索",
|
||
"Search...": "检索...",
|
||
"Search and Replace": "搜索与替换",
|
||
"Search and Replace for all images displayed.": "搜索并替换所有显示的图像",
|
||
"Search and Replace in": "在何处搜索和替换",
|
||
"Search anything : Prompt, Size, Model, ...": "检索任意内容: 提示词, 尺寸, 模型, ...",
|
||
"Search by alias": "按别名检索",
|
||
"Search by translation": "按照译文检索",
|
||
"Search for embeddings": "检索嵌入式模型 (Embeddings)",
|
||
"Search for hypernetworks": "检索超网络",
|
||
"Search for Loras": "检索 Lora 模型",
|
||
"Search for LyCORIS/LoHa": "检索 LyCORIS/LoHa 模型",
|
||
"Search for wildcards": "检索通配符",
|
||
"Search in wildcard names...": "使用通配符名称检索...",
|
||
"Search Mode": "检索模式",
|
||
"Search negative prompt": "检索反向提示词",
|
||
"Search tag, .. ->": "检索标签, .. ->",
|
||
"Search Tags": "检索标签",
|
||
"Search tags / Filter images by tags": "搜索标签 / 按标签筛选图像",
|
||
"Search tags / Filter images by tags (INCLUSIVE)": "通过搜索 / 筛选标签来过滤图片（包含）",
|
||
"Search Text": "搜索文本",
|
||
"Search workflows in subdirectories": "在子目录检索工作流",
|
||
"seascape": "seascape (海景)",
|
||
"Secondary model (B)": "模型 B",
|
||
"Second upscaler": "第二放大方法",
|
||
"Security": "安全性",
|
||
"(See": "(查看 ",
|
||
"See": "查看",
|
||
"seed": "随机数种子 (seed)",
|
||
"Seed": "随机数种子 (Seed)",
|
||
"Seed behavior": "种子行为",
|
||
"'seed_behavior' will be forcibly set to 'schedule'.": "“种子行为” 会被强制设为 “调度计划” 来进行调度",
|
||
"seed for the whole video generation.": " 种子 (供整个视频生成过程使用)",
|
||
"Seed iter N": "种子迭代量 N",
|
||
"Seed of a different picture to be mixed into the generation.": "将要参与生成的另一张图的随机种子",
|
||
"Seed schedule": "种子调度计划",
|
||
"seed_schedule should start and end on the same seed.": "种子调度计划应该在同一种子上开始和结束",
|
||
"Seed training RNG. Useful for testing, but may cause minor performance reduction.": "RNG 随机数种子训练。对测试有用，也许会导致性能略微下降。",
|
||
"See here for explanation of each parameter.": "有关每个参数的说明，请点击 这里 查看。",
|
||
"See the progress.": "查看图像增强的实时预览进程",
|
||
"Seg": "Seg (语义分割)",
|
||
"Segment Anything": "Segment Anything (分离图像元素)\n",
|
||
"Segment Anything Output": "Segment Anything 输出",
|
||
"Segment Anything status": "Segment Anything 状态",
|
||
"segmentation prompt": "图像切分提示词",
|
||
"Segmentation status": "语义分割状态",
|
||
"seg_ofade20k": "seg_ofade20k (语义分割 - OneFormer 算法 - ADE20k 协议)",
|
||
"seg_ofcoco": "seg_ofcoco (语义分割 - OneFormer 算法 - COCO 协议)",
|
||
"seg_ufade20k": "seg_ufade20k (语义分割 - UniFormer 算法 - ADE20k 协议)",
|
||
"Select": "选择",
|
||
"Select a collection": "选择集合",
|
||
"Select a component class or specific component.": "选择一个组件类或特定组件",
|
||
"Select activation function of hypernetwork. Recommended : Swish / Linear(none)": "超网络的激活函数。推荐 Swish / Linear (线性)",
|
||
"select all": "全选",
|
||
"Select components to hide": "选择要隐藏的组件",
|
||
"(select Disco output format).": " (选择 Disco 输出格式) .",
|
||
"selected": "选中的",
|
||
"Selected": "选择",
|
||
"Selected image": "当前所选图片",
|
||
"Selected Image :": "选择图片",
|
||
"(selected items appear first)": "(选中组件优先显示)",
|
||
"Selected One": "选择一个",
|
||
"Selected Tags": "选中的标签",
|
||
"selected tags from the images displayed.": "来自显示图像中已选择的标签",
|
||
"Selected VAE overrides per-model preferences": "使用选中的 VAE 覆盖每个大模型的 VAE 首选项",
|
||
"Select images from the left gallery.": "从左侧选择图片",
|
||
"Select joining char": "选择分隔符",
|
||
"Select keyframes to be given to ebsynth.": "Ebsynth 提取关键帧。",
|
||
"Select Layer weights initialization. Recommended: Kaiming for relu-like, Xavier for sigmoid-like, Normal otherwise": "选择初始化层权重的方案。建议：类relu 用 Kaiming； 类sigmoid 用 Xavier；其他就用正态",
|
||
"Select or Create a Model.": "选择或创建一个模型。",
|
||
"Select or create a model to begin.": "选择或创建一个模型以开始",
|
||
"Select prompt": "选择提示词",
|
||
"selects the type of animation": "选择动画类型",
|
||
"Selects the type of Optical Flow to use if Optical Flow is selected in Hybrid motion.": "如果在混合运动模式中选择了光流法，则选择要使用的光流算法类型",
|
||
"select the frame interpolation engine. hover on the options for more info": "选择帧插值引擎。悬停鼠标指针在选项上查看更多信息",
|
||
"Select this if you want to use the same seed for every generated image.\nThis is useful if you want to test prompt variations while using the same seed.\nIf there are no wildcards then all the images will be identical.": "勾选此选项以对每张生成的图像用同样的随机种子\n这在想用同样的随机种子测试提示词变化时会有用\n没有通配符则所有图像会相同",
|
||
"Select Translater": "选择翻译引擎",
|
||
"Select visible tags": "选择可见标签",
|
||
"Select which Real-ESRGAN models to show in the web UI.": "选择在 web UI 显示的 Real-ESRGAN 模型",
|
||
"Select which Real-ESRGAN models to show in the web UI. (Requires restart)": "选择在网页界面显示哪些 Real-ESRGAN 模型。(需重启)",
|
||
"Send dimensions to stable diffusion": "将当前图片尺寸信息发送到生成设置",
|
||
"Send image and generation parameters to extras tab.": "发送图像和生成参数到后期处理选项卡",
|
||
"Send image and generation parameters to img2img inpaint tab.": "发送图像和生成参数到图生图局部重绘选项卡",
|
||
"Send image and generation parameters to img2img tab.": "发送图像和生成参数到图生图选项卡",
|
||
"Send image to tag selection": "发送到 标签 (Tag) 选择",
|
||
"Send interrupt": "发送中断指令",
|
||
"Send pose to /openpose_editor_index for edit.": "发送姿态图到 openpose editor 页面编辑",
|
||
"Send prompt up": "发送提示词到上方",
|
||
"Send seed when sending prompt or image to other interface": "将提示词或者图像发送到其他界面时，同时传送种子数值",
|
||
"Send size when sending prompt or image to another interface": "将提示词或者图像发送到其他界面时，同时传送图像尺寸",
|
||
"Send this image to ControlNet.": "将图片发送至 ControlNet",
|
||
"Send to": "发送到",
|
||
"Send to Blend": "发送到 混合",
|
||
"Send to Canvas Editor": "发送到 Canvas Editor",
|
||
"Send to ControlNet": "发送到 ControlNet",
|
||
"Send to ControlNet (img2img)": "发送到 ControlNet (图生图)",
|
||
"Send to ControlNet (txt2img)": "发送到 ControlNet (文生图)",
|
||
"Send to Effect": "发送到 效果",
|
||
"Send to extras": "发送到 后期处理",
|
||
"Send to Extras": "发送到 后期处理",
|
||
"Send to img2img": "发送到 图生图",
|
||
"Send to img2img:": "发送到 图生图：",
|
||
"Send to img2img ControlNet": "发送到 图生图 ControlNet",
|
||
"Send to inpaint": "发送到 重绘",
|
||
"Send to inpaint upload": "发送到 重绘蒙版",
|
||
"Send to ip2p": "发送到 图生图 pix2pix",
|
||
"Send to Layer1": "发送到图层 1",
|
||
"Send to Layer2": "发送到图层 2",
|
||
"Send to Layer3": "发送到图层 3",
|
||
"Send to Layer4": "发送到图层 4",
|
||
"Send to Layer5": "发送到图层 5",
|
||
"Send to Multi-Merge": "发送到 多重合并",
|
||
"Send to openOutpaint": "发送到 openOutpaint",
|
||
"Send to QR Compare": "发送到 二维码对比器",
|
||
"Send to QR Scanner": "发送到 二维码扫描器",
|
||
"Send to txt2img": "发送到 文生图",
|
||
"Send to txt2img:": "发送到 文生图：",
|
||
"Send to txt2img and img2img": "发送到 文生图和图生图",
|
||
"Send to txt2img ControlNet": "发送到 文生图 ControlNet",
|
||
"Send training samples to a Discord channel after generation.": "把生成的训练样本图像发送到 Discord 频道。",
|
||
"(separate by comma)": "(用逗号分隔)",
|
||
"Separate prompts into parts using vertical pipe character (|) and the script will create a picture for every combination of them (except for the first part, which will be present in all combinations)": "用竖线分隔符(|)将提示词分成若干部分，脚本将为它们每个可能的组合创建一个图像（始终保留提示的第一部分，使用相同的种子）",
|
||
"Separate UNet/Text Encoder weights": "单独设置 UNet/Text Encoder 权重",
|
||
"Separate values for X axis using commas.": "使用逗号分隔 X 轴的值",
|
||
"Separate values for Y axis using commas.": "使用逗号分隔 Y 轴的值",
|
||
"Sequential Merge Parameters": "合并参数序列",
|
||
"Sequential XY Merge and Generation": "顺序合并并生成 XY 图",
|
||
"Server start time": "服务器启动时间",
|
||
"🖼 Set": "🖼 设置",
|
||
"Set a variable like so:": "像这样设置变量：",
|
||
"Set Gradients to None When Zeroing": "归零时将梯度设置为无",
|
||
"Set \"Hires steps\" to [0], if you need": "设置 \"高分迭代步数\" 为 [0], 如果你需要",
|
||
"Set Init tab's strength slider greater than 0. Recommended value (.65 - .80).": "将Init选项卡的强度滑块设置为大于0。建议值（.65-.80）。",
|
||
"Set Random Pose": "设置随机姿势",
|
||
"Set ranking to": "设置评分为",
|
||
"sets a midpoint at which a depth-map is to be drawn: range [-1 to +1]": "设置绘制深度图的中点: 范围 [ -1 到 +1 ]",
|
||
"Set 'seed_behavior' to 'schedule' under the Seed Scheduling section below.": "在下面的“种子调度”部分下，将 “seed_behavior” 设置为 “schedule” 。",
|
||
"Set seed to -1, which will cause a new random number to be used every time": "将随机种子设置为 -1，则每次都会使用一个新的随机数",
|
||
"Set the Latent Couple extension to 2 area’s (standard setting)": "设置 Latent Couple 插件为 2 分区域 (标准设置)",
|
||
"Set the preprocessor to [invert] If your image has white background and black lines.": "如果使用白底黑线图片，请使用 \"invert\" 预处理器。",
|
||
"Set the prompt compounder to: 2": "设置提示词混合为: 2",
|
||
"Set the Prompt Seperator mode to: automatic": "设置提示词分隔模式为: 自动",
|
||
"Set the Prompt Seperator mode to: prefix AND prompt + suffix": "设置提示词分隔模式为: prefix AND prompt + suffix （前缀 AND 提示词 + 后缀）",
|
||
"Set the Prompt seperator to: AND": "设置提示词分隔符为: AND",
|
||
"Set the strength to 0 automatically when no init image is used": "当无初始化图像在再被使用时，强度值将自动设置为 0",
|
||
" Setting": "设置",
|
||
"(setting entries that also appear in img2img interfaces)": "(同样会出现在 “图生图” 界面的设置选项)",
|
||
"(setting entries that also appear in txt2img/img2img interfaces)": "(配置同时出现在 文生图 / 图生图 界面的选项条目)",
|
||
"(setting entries that also appear in txt2img interfaces)": "(同样会出现在 “文生图” 界面的设置选项)",
|
||
"(setting entries that appear at the top of page rather than in settings tab)": "(添加位于网页界面顶部的选项, 而不是在设置选项卡中)",
|
||
"Setting files": "设置文件",
|
||
"settings": "设置",
|
||
"Settings": "设置",
|
||
"Settings->ControlNet->Allow other script to control this extension": "设置->ControlNet->允许其他脚本控制此扩展",
|
||
"Settings File": "设置文件",
|
||
"settings file path can be relative to webui folder OR full - absolute": "设置文件路径可以相对于 SD-WebUI 根目录，也可以是完整的绝对路径",
|
||
"Settings file Path can be relative to webui folder OR full - absolute": "设置文件路径可以相对于 SD-WebUI 根目录，也可以是完整的绝对路径",
|
||
"settings for": "设置。包括: ",
|
||
"Settings->Interrogate Option->Interrogate: include ranks of model tags matches in results": "设置->反推设置->反推结果包含模型标签匹配等级",
|
||
"Settings stack. If it's not checked, it wont overwrite. Apply one, then another. Reset is old, update how you need.": "设置堆栈。如果未选中，则不会覆盖。应用一个，再应用另一个。重置已过时，请根据需要进行更新。",
|
||
"Set to 0 to disable": "设置为 0 以禁用",
|
||
"set to default": "设为默认",
|
||
"Set your total number of keyframes to be 21 more than the last inserted keyframe image.": "将关键帧总数设置得比最后插入的关键帧图像大 21",
|
||
"SFW mode 👀 (blur all images)": "健全模式 👀 (模糊所有图像)",
|
||
"Shapes": "形状",
|
||
"Shared memory": "共享内存",
|
||
"Sharpness": "锐度",
|
||
"Sharpness:": "锐化度",
|
||
"should be 2 or lower.": "应小于等于2",
|
||
"Shoulder To Hip": "肩臀距离",
|
||
"Shoulder Width": "肩宽",
|
||
"Show Additional Generation Info": "显示附加生成信息",
|
||
"Show all pages": "显示所有设置页",
|
||
"Show all results": "展示所有候选标签",
|
||
"Show API Key": "显示 API Key",
|
||
"Show batch images in gradio gallerie output": "在 Gradio Gallerie 输出中批量显示图像",
|
||
"Show batch images in gradio gallery output": "在 Gradio 图像输出框中批量显示图像",
|
||
"Show Button On Thumb Mode": "在缩略图模式下显示按钮",
|
||
"Show cards for models in hidden directories": "显示隐藏目录中的模型卡片",
|
||
"Show Civitai Link events in the console": "在控制台输出 Civitai Link 事件",
|
||
"Show command for conversion": "显示转换命令行",
|
||
"Show console debug": "在控制台显示调试信息",
|
||
"Show debug message": "显示调试信息",
|
||
"Show DepthMap": "展示深度图",
|
||
"Show description of how to edit tags": "显示如何编辑标签",
|
||
"Show description on card": "在卡片上显示描述信息",
|
||
"Show dirs": "显示文件夹",
|
||
"Show extra networks": "显示扩展模型面板",
|
||
"Show extra options": "显示额外选项",
|
||
"Show generation progress in window title.": "在窗口标题中显示生成进度",
|
||
"Show gradio deprecation warnings in console.": "在控制台中显示 Gradio 的弃用警告",
|
||
"Show grid in results for web": "在网页输出结果中显示网格图",
|
||
"Show HeatMap": "展示热力图",
|
||
"Show hidden directories": "显示隐藏目录",
|
||
"Show/hide extra networks": "显示/隐藏扩展模型",
|
||
"Show/Hide Generation Info": "显示/隐藏生成信息",
|
||
"Show images zoomed in by default in full page image viewer": "在网页全屏图像查看器中，默认放大显示图像",
|
||
"Show intermediate steps": "显示中间步骤",
|
||
"Show internal metadata": "显示内部元数据",
|
||
"Show live previews of the created image": "显示当前生成图像的实时预览",
|
||
"Show live tag translation below prompt": "在提示词下方显示实时标签翻译",
|
||
"Show live tag translation below prompt (WIP, expect some bugs)": "在提示词下方显示实时标签翻译 (未完成，预计会有一些bug)",
|
||
"Show more info": "显示更多信息",
|
||
"Show '?' next to tags, linking to its Danbooru or e621 wiki page": "在标签 旁显示 '?' , 链接到其 Danbooru 或 e621 的 Wiki 页面",
|
||
"Show '?' next to tags, linking to its Danbooru or e621 wiki page (Warning: This is an external site and very likely contains NSFW examples!)": "在 Tag 旁边显示 '?' , 链接到其 Danbooru 或 e621 维基页面（警告：外部网站可能包含 NSFW 内容!）",
|
||
"Show only the tags selected in the Positive Filter": "只展示在 Positive 过滤器中的被选中标签",
|
||
"Show original image": "显示原始图像",
|
||
"Show Preview": "显示预览",
|
||
"Show previews of all images generated in a batch as a grid": "通过网格图预览单个批次的所有图像",
|
||
"Show preview thumbnails for extra networks if available": "显示扩展模型预览缩略图 (如可用)",
|
||
"Show progressbar": "显示进度条",
|
||
"Show progress indicator": "显示进度指示器",
|
||
"Show result images": "显示输出图像",
|
||
"Show verbose debug info at console": "在控制台中输出详尽的调试信息",
|
||
"Show warnings in console.": "在控制台中显示警告",
|
||
"Show Width/Height and Batch sliders in same row": "将批次与批量设置整合到长宽设置的右侧",
|
||
"shuffle": "shuffle (随机洗牌)",
|
||
"Shuffle": "Shuffle (随机洗牌)",
|
||
"Shuffleing tags by ',' when create texts.": "创建文本时打乱以 ',' 分割的标签",
|
||
"Shuffle Tags": "打乱标签",
|
||
"Shuffle tags by ',' when creating prompts.": "创建提示词时按 ',' 打乱标签(tags)",
|
||
"Shuffle wildcards before use for more random outputs": "使用前打乱通配符以获取更随机的结果",
|
||
"Shutdown server": "关闭服务器",
|
||
"Sidebar": "侧边栏",
|
||
"Sides": "每边张数",
|
||
"Sigma adjustment for finding noise for image": "为寻找图中噪点的 Sigma 调整",
|
||
"sigma churn": "sigma churn (流失率)",
|
||
"sigma max": "最大 Sigma",
|
||
"sigma min": "最小 Sigma",
|
||
"sigma noise": "sigma noise (噪声标准差)",
|
||
"Sigma noise": "Sigma 噪声",
|
||
"Sigma Noise": "Sigma 噪声",
|
||
"Sigma schedule": "Sigma 调度计划",
|
||
"sigma tmax": "sigma tmax (最大时间步长)",
|
||
"sigma tmin": "sigma tmin (最小时间步长)",
|
||
"Simple": "单一值",
|
||
"Simple (Auto-value)": "单一值（自动取值）",
|
||
"Single": "单次处理",
|
||
"single image": "单张图片",
|
||
"Single image": "单张图像",
|
||
"Single Image": "单张图片",
|
||
"Single process": "单次处理",
|
||
"Single text file with all prompts": "包含所有提示词的一个文本文件",
|
||
"Size": "尺寸",
|
||
"Size of the face when recreating": "重建脸部的尺寸",
|
||
"Size of the thumbnails (px)": "缩略图大小 (单位: 像素)",
|
||
"Size to generate": "生成规格",
|
||
"sketch": "涂鸦",
|
||
"Sketch": "涂鸦",
|
||
"Sketch initial brush color": "涂鸦初始画笔颜色",
|
||
"Skip": "跳过",
|
||
"Skip generation and use (edited/custom) depthmaps in output directory when a file already exists.": "当文件已存在时，跳过生成并使用输出目录中的（已存在/自定义）的深度图。",
|
||
"Skip generation and use (edited/custom) depthmaps in output directory when a file exists.": "当文件已存在时, 跳过生成并在输出目录中使用 (编辑后/自定义) 的深度图",
|
||
"Skip img2img processing when using img2img initial image": "使用图生图初始图像时跳过图生图处理",
|
||
"(skip negative prompt for some steps when the image is almost ready; 0=disable, higher=faster)": "(当图像接近生成完成时, 跳过部分步数的负面提示词影响; 0=禁用, 数值越大=越快速)",
|
||
"Skip negative prompt for steps where image is already mostly denoised; the higher this value, the more skips there will be; provides increased performance in exchange for minor quality reduction.": "对图像已经完成大部分去噪的采样步数, 跳过反向提示词; 这个值越高, 跳过的步数就越多; 以轻微的质量降低换取更高的性能",
|
||
"Skip NSFW Preview Images": "下载预览图时跳过含成人内容的图像",
|
||
"SKip NSFW Preview images": "下载预览图时跳过含成人内容的图像",
|
||
"SKip NSFW Preview Images": "下载预览图时跳过含成人内容的图像",
|
||
"Skip/Reset CLIP position_ids": "跳过或重置 CLIP position_ids 键值",
|
||
"Skip video creation": "跳过视频生成",
|
||
"slow": "慢速",
|
||
"slower": "很慢",
|
||
"Slow Mo": "慢动作",
|
||
"Slow-Mo the interpolated video, audio will not be used if enabled": "慢动作插值视频, 启用后不使用音频",
|
||
"Smart subject": "智能主题",
|
||
"Smart subject tries to determine what to and not to generate based on your subject. Example, if your Overwrite subject is formed like this: Obese man wearing a kimono": "智能主题会尝试根据你的主题决定要生成什么和避免生成什么。\n比如说，如果你的覆盖主题是这样的格式：穿着和服的肥胖男子",
|
||
"Smoothing": "柔和度",
|
||
"Snapshot to Resume": "恢复快照",
|
||
"Socket port for image browser": "Cozy 图库浏览器的 Socket 端口",
|
||
"SoftEdge": "SoftEdge (软边缘)",
|
||
"softedge_hed": "softedge_hed (HED 软边缘检测)",
|
||
"softedge_hedsafe": "SoftEdge_HEDSafe (软边缘检测 - 保守 HED 算法)",
|
||
"softedge_pidinet": "SoftEdge_PiDiNet (软边缘检测 - PiDiNet 算法)",
|
||
"softedge_pidisafe": "SoftEdge_PiDiNetSafe (软边缘检测 - 保守 PiDiNet 算法)",
|
||
"soft_light": "柔光",
|
||
"solution.": "的解决方法。",
|
||
"Some settings have been moved to the settings tab. Find them in the Dynamic Prompts section.": "一些选项已经被移动至设置中，在设置里的 Dynamic Prompt 选项下可以找到",
|
||
"Sort bounding boxes by": "按以下方式对边界框进行排序",
|
||
"sort by": "排序方式",
|
||
"Sort by": "排序方式",
|
||
"Sort by alphabetical order": "按首字母顺序排序",
|
||
"Sort caption on save": "保存时对描述排序",
|
||
"Sorting": "排序",
|
||
"Sort LoRA models by": "低秩微调 (LoRA) 模型排序方式",
|
||
"Sort Order": "排序方式",
|
||
"Sort tags": "排序标签",
|
||
"Sort tags in the images displayed.": "在已显示的图像中排序标签",
|
||
"Sort wildcard file contents alphabetically": "按字母顺序排列通配符文件内容",
|
||
"(so they are used as literal brackets and not for emphasis)": "(启用后作为字面意义上的括号使用, 不起强调作用)",
|
||
"Soundtrack path": "音轨路径",
|
||
"Source": "来源",
|
||
"Source Checkpoint": "源模型",
|
||
"Source Checkpoint:": "底模来源:",
|
||
"Source directory": "源目录",
|
||
"Source image": "原始图像",
|
||
"Source Path": "源路径",
|
||
"Source URL where this model could be found": "该模型发布的原始网址",
|
||
"space": "space (空格/空间艺术)",
|
||
"Specific branch name": "特定分支名",
|
||
"specify a custom settings file and ignore settings displayed in the interface": "指定自定义设置文件并忽略界面中显示的设置",
|
||
"Specify the amount that you wish to expand the mask by (recommend 0-10)": "设定蒙版扩展量（建议0-10）",
|
||
"Specify the amount that you wish to expand the mask by (recommend 30)": "设定蒙版扩展量（建议30）",
|
||
"specify your own seed schedule": "指定自己所需的种子调度计划",
|
||
"specify your own seed schedule (found on the Keyframes page)": "指定你自己的种子数表（可在关键帧选项卡中找到）",
|
||
"Speech": "语音",
|
||
"split": "分离",
|
||
"Split based on cuts (as well)": "基于分割进行提取（同时）",
|
||
"Split image overlap ratio": "分割图像重叠比率",
|
||
"Split image threshold": "图像分割阈值",
|
||
"Split mode": "分割模式",
|
||
"Split over-sized images": "分割过大的图像",
|
||
"Split oversized images": "分割过大的图像",
|
||
"Split oversized images into two": "将过大的图像分为两份",
|
||
"Split sides again after inpainting?": "重绘后分边?",
|
||
"Splits model loss during training into Instance Loss and Prior Loss. Requires class images to be enabled.": "将训练过程中的模型损失分为 \"实例损失\" 和 \"先验损失\" 。需要启用类别图像。",
|
||
"Split Video": "分割视频",
|
||
"square": "square (方图)",
|
||
"SR Model": "SR 模型",
|
||
"SSAA": "超级采样抗锯齿",
|
||
"Stability API Settings": "Stability API 设置",
|
||
"stability_score_offset": "稳定性得分偏移",
|
||
"stability_score_thresh": "稳定性得分阈值",
|
||
"stability_score_threshold": "稳定性得分阈值",
|
||
"Stable Diffusion": "SD",
|
||
"Stable Diffusion checkpoint": "Stable Diffusion 模型",
|
||
"Stable Diffusion checkpoint autoload on server start": "在服务器启动时自动加载 Stable Diffusion 模型",
|
||
"Stable Diffusion checkpoint: refresh": "SD 模型: 刷新",
|
||
"Stable Diffusion version": "Stable Diffusion 版本",
|
||
"Stable Diffusion XL": "SDXL",
|
||
"Stackable": "可堆叠",
|
||
"Stackable checkbox is not used for saves, it's used when making a selection from the dropdown, whether to apply as stackable or not": "可堆叠复选框不用于保存，它用于从下拉列表中进行选择，无论是否应用为可堆叠",
|
||
"stage 1": "步骤 1",
|
||
"stage1": "步骤 1",
|
||
"stage 2": "步骤 2",
|
||
"stage2": "步骤 2",
|
||
"stage 3": "步骤 3",
|
||
"(Stage 3, 4, and 6 only show a guide and do nothing actual processing.)": "（步骤 3、4和6只显示指南，不做实际的操作。）",
|
||
"stage 3.5": "步骤 3.5",
|
||
"stage 4": "步骤 4",
|
||
"stage 5": "步骤 5",
|
||
"stage 6": "步骤 6",
|
||
"stage 7": "步骤 7",
|
||
"stage 8": "步骤 8",
|
||
"stained glass": "stained glass (彩色玻璃)",
|
||
"stars": "按 Star 数量",
|
||
"Start Auto Translate": "开始自动翻译",
|
||
"Start batch process": "开始批量处理",
|
||
"Start Cropping": "开始裁剪",
|
||
"Start drawing": "开始绘制",
|
||
"start extracting the input video only from this frame number": "指定输入视频某帧开始提取",
|
||
"Start generating and upscaling!": "开始生成并放大",
|
||
"Starting Control Step": "引导介入时机",
|
||
"Starting Control Step schedule": "引导介入时机调度计划",
|
||
"Starting seed for the animation. -1 for random": "动画起始随机数种子。设置 -1 为随机",
|
||
"Start steps": "开始步数",
|
||
"Start training.": "开始训练",
|
||
"Start WebUi with option --api for this to work.": "启动 WebUi 时加入 --api 启动参数来保证本标签页的功能正常工作。",
|
||
"State": "运行状态",
|
||
"State to restore": "待恢复部分",
|
||
"status": "状态",
|
||
"Status": "状态",
|
||
"Status:": "状态: ",
|
||
"Std": "标准差",
|
||
"step": "迭代步数",
|
||
"Step": "迭代步数",
|
||
"Step Ratio of Text Encoder Training": "训练文本编码器 (TE/CLIP) 的步数比率",
|
||
"Steps": "迭代步数",
|
||
"Steps schedule": "迭代步数调度计划",
|
||
"Sticker": "贴纸",
|
||
"still life": "still life (静物画)",
|
||
"Still Mode (fewer hand motion, works with preprocess `full`)": "静止模式 (更少的手部运动, 需要和 `完整` 预处理一起工作)",
|
||
"*Stitch frames to video*": "*将帧缝合为视频*",
|
||
"Stop": "停止",
|
||
"Stop processing current image and continue processing.": "停止处理当前图像，并继续处理下一个",
|
||
"Stop processing images and return any results accumulated so far.": "停止处理图像，并返回迄今为止累积的所有结果",
|
||
"stop the extraction of the video at this frame number. -1 for no limits": "指定输入视频某帧结束提取，-1 表示无限制（全部）",
|
||
"Stop XY": "停止生成 X/Y 图",
|
||
"Store frames in ram": "将帧保存到内存",
|
||
"Store images in database": "在数据库中存储图像",
|
||
"Store preferences and SVG content locally": "在本地保存设置和SVG图像",
|
||
"storybook realism": "storybook realism (故事书写实主义/迪士尼艺术)",
|
||
"straight-line": "直线",
|
||
"street art": "street art (街头艺术)",
|
||
"streetscape": "streetscape (街景)",
|
||
"strength": "强度",
|
||
"Strength": "强度",
|
||
"Strength 0 no init": "强度为 0 时停用初始化",
|
||
"Strength schedule": "强度调度计划",
|
||
"Strict Tokens": "规范词元",
|
||
"String to use as left bracket for parser variants, .e.g {variant1|variant2|variant3}": "用于当作解析变量左括号的字符，例如 {变量1|变量2|变量3}",
|
||
"String to use as right bracket for parser variants, .e.g {variant1|variant2|variant3}": "用于当作解析变量右括号的字符，例如 {变量1|变量2|变量3}",
|
||
"String to use as wrap for parser wildcard, .e.g __wildcard__": "用于当作解析通配符组的字符，例如 __通配符__",
|
||
"Style 1": "模版风格 1",
|
||
"Style 2": "模版风格 2",
|
||
"Style Name": "样式名称",
|
||
"Styles": "预设样式",
|
||
"Styles allow you to add custom text to prompt. Use the {prompt} token in style text, and it will be replaced with user's prompt when applying style. Otherwise, style's text will be added to the end of the prompt.": "预设样式允许自行添加自定义文本到提示词中。\n在预设样式文本中使用 {提示词} 词元，在应用预设样式时，它将被用户的提示词所替代。\n不然的话，预设样式文本会被添加到提示词末尾。",
|
||
"Styles: refresh": "预设样式: 刷新",
|
||
"Sub directory depth": "子目录深度",
|
||
"Sub-folder": "子文件夹",
|
||
"Subject": "主题",
|
||
"Subject Types": "主题类型",
|
||
"Submit": "提交",
|
||
"Submit results": "提交结果",
|
||
"SubSeed": "第二种子",
|
||
"Subseed schedule": "第二种子调度计划",
|
||
"Subseed strength schedule": "第二种子强度调度计划",
|
||
"Suffix": "后缀名",
|
||
"Suggested weight": "建议权重",
|
||
"Sum": "和",
|
||
"sum Twice:(A*(1-alpha)+B*alpha)*(1-beta)+C*beta": "两次求和: (A*(1-α)+B*α)*(1-β)+C*β",
|
||
"superfast": "超级快",
|
||
"SuperMerger": "超级模型融合",
|
||
"Supported engines:": "支持的引擎：",
|
||
"Supports boolean operations: (! - negation, & - and, | - or, ^ - xor, \\ - difference, () - nested operations)": "支持布尔运算：（！-否定/取反，&-与，|-或，^-异或，\\-差分，()-嵌套操作）",
|
||
"surrealism": "surrealism (超现实主义)",
|
||
"Swap axes": "互换坐标轴",
|
||
"Swap hotkey combinations for Zoom and Adjust brush resize": "交换缩放和调整画笔大小的热键组合",
|
||
"swap XY": "互换 XY 轴",
|
||
"Swap X/Y axes": "X/Y 轴互换",
|
||
"Swap X/Z axes": "X/Z 轴互换",
|
||
"Swap Y/Z axes": "Y/Z 轴互换",
|
||
"Swipe left/right navigates to the next image": "左右滑动时导航到下一张图片",
|
||
"Switch at": "切换时机",
|
||
"Switch prompt between Native language and English": "切换提示词显示语言 (母语/英语)",
|
||
"(switch to another model in the middle of generation)": "(在生成中途切换的另一个模型)",
|
||
"switch to another model in the middle of generation": "在生成中途切换的另一个模型",
|
||
"Switch to Inpaint Upload": "发送到 重绘蒙版",
|
||
"symbolism": "symbolism (象征主义)",
|
||
"Syntax cheatsheet": "语法手册",
|
||
"Sysinfo": "系统信息",
|
||
"system": "系统",
|
||
"System": "系统设置",
|
||
"System data": "系统信息",
|
||
"System Info": "系统信息",
|
||
"System: peak amout of video memory allocated by all running programs, out of total capacity": "系统：所有运行程序分配的显存峰值，占总容量的百分比",
|
||
"T2IA": "T2IA (自适应)",
|
||
"t2ia_color_grid": "T2ia_Color_Grid (自适应 色彩像素化处理)",
|
||
"t2ia_sketch_pidi": "T2ia_Sketch_PiDi (自适应 手绘边缘处理)",
|
||
"t2ia_style_clipvision": "T2ia_Style_Clipvision (自适应 风格迁移处理)",
|
||
"tab": "选项卡",
|
||
"Tag Autocomplete": "标签自动补全",
|
||
"Tag confidences": "标签置信度",
|
||
"Tag confidents": "标签置信度",
|
||
"Tag filename": "选择使用的标签文件名",
|
||
"Tag file output format. Leave blank to use same filename or e.g. \"[name].[hash:sha1].[output_extension]\". Also allowed are [extension] or any other [hash:<algorithm>] supported by hashlib": "标签文件输出格式。留空以使用相同文件名或以下示例。“[name].[hash:sha1].[output_extension]”。同时允许使用 [extension] 或 hashlib 支持的任何其他 [hash:<algorithm>] 算法。",
|
||
"Tagger": "WD 1.4 标签器",
|
||
"Tagging": "打标",
|
||
"Tagging Confidence Threshold": "标签置信度阈值",
|
||
"Tag images": "多图打标",
|
||
"Tag one image": "单图打标",
|
||
"Tags": "标签",
|
||
"tags from the images displayed.": "显示图像的标签",
|
||
"(takes precedence over the regular space setting for that position)": "(优先于在该位置的其他常规空间设置)",
|
||
"Take the focus off the prompt when working with a canvas": "使用画布时, 将焦点从提示词上移开",
|
||
"Target": "目标",
|
||
"Target dataset num: ": "目标数据集数量：",
|
||
"Target Folder": "目标文件夹",
|
||
"Target language": "目标语言",
|
||
"Target Language": "目标语言",
|
||
"Target tokens (comma separated)": "分隔目标提示词(逗号分隔)",
|
||
"Task History": "任务历史",
|
||
"Task Queue": "任务队列",
|
||
"Tattoo": "纹身",
|
||
"(Technical button, neededs for testing)": "(技术性按钮, 用于测试)",
|
||
"temparature": "色温",
|
||
"temperature": "色温",
|
||
"template": "模板",
|
||
"Temporal-Warp": "Temporal 修复",
|
||
"TENC Gradient Clip Norm": "裁剪文本编码器 (TENC/CLIP) 梯度归一层",
|
||
"TEnc Weight 1": "Text Encoder 权重 1",
|
||
"TEnc Weight 2": "Text Encoder 权重 2",
|
||
"TEnc Weight 3": "Text Encoder 权重 3",
|
||
"TEnc Weight 4": "Text Encoder 权重 4",
|
||
"TEnc Weight 5": "Text Encoder 权重 5",
|
||
"TENC Weight Decay": "文本编码器 (TENC/CLIP) 权重衰减",
|
||
"Tertiary model (C)": "模型 C",
|
||
"Testing": "测试",
|
||
"TEST-MAX-ALL": "全部测试",
|
||
"Textbox": "文本框",
|
||
"Text color for image grids": "网格图文本颜色",
|
||
"Text data view": "文本数据查看",
|
||
"text encoder": "文本编码器",
|
||
"Text Encoder Learning Rate": "文本编码器 (TE/CLIP) 学习率 (LR)",
|
||
"Text file for each image": "对应每个图像的文本文件",
|
||
"Text files directory (optional, will load from input dir if not specified)": "文本文件目录 (可选, 如不指定将从输入目录加载)",
|
||
"Text files directory (Optional, will load from input dir if not specified)": "文本文件目录 (可选, 如不指定将从输入目录加载)",
|
||
"textile": "textile (纺织艺术)",
|
||
"Text input": "文本输入",
|
||
"Textual Inversion": "嵌入式 (T.I. Embedding)",
|
||
"The": "这个 ",
|
||
"The 1st and last keyframe images should match.": "第一个和最后一个关键帧图像应该匹配。",
|
||
"the 2D vanishing point of perspective (rec. range 30-160)": "2D 透视消失点 (rec. 范围: 30-160)",
|
||
"The algorithm is not able to enhance all images.": "本算法不能增强所有图像",
|
||
"The algorithm used to generate noise used in the diffusion process.": "扩散过程中用于产生噪声的算法。",
|
||
"The alpha schedule controls overall alpha for video mix, whether using a composite mask or not.": "半透明调度计划控制视频混合的整体透明度, 无论是否使用合成蒙版",
|
||
"The annotator directory inside the SAM extension directory is only a symbolic link. This is to save your space and make the extension repository clean.": "SAM 扩展目录中的解释器目录只是符号链接。这样能够节省你的硬盘空间，并使扩展库更加有序。",
|
||
"The Classifier-Free Guidance Scale to use for classifier/regularization images.": "用于分类/正则化图像的无分类器引导系数 (CFG Scale - 无分类器引导系数(Classifier-Free Guidance Scale))",
|
||
"The Classifier-Free Guidance Scale to use for preview images.": "用于生成预览图像的无分类器引导系数。",
|
||
"The code for this extension:": "本插件的源码仓库: ",
|
||
"The current workflow is [text prompt]->[object detection]->[segmentation]. Semantic segmentation support is in Auto SAM panel.": "目前的工作流是 [文本提示词]->[对象检测]->[语义分割]。语义分割支持在自动 SAM 面板中。",
|
||
"The denoising curve controls the rate of denoising strength change each loop. Aggressive: Most of the change will happen towards the start of the loops. Linear: Change will be constant through all loops. Lazy: Most of the change will happen towards the end of the loops.": "重绘幅度曲线控制每次处理的重绘幅度变化率\n激进: 处理的 开始阶段 大规模变动重绘幅度\n线性: 处理的 全部阶段 重绘幅度变化率一致\n保守: 处理的 结束阶段 大规模变动重绘幅度",
|
||
"The denoising strength for the final loop of each image in the batch.": "每一批次中每个图像的最终循环时的重绘幅度",
|
||
"The difference between the last two models will be added to the first. Requires three models; A, B and C. The result is calculated as A + (B - C) * M": "后两个模型的差值将叠加在主要模型上。需要输入 A、B、C 三个模型。计算公式为 A + (B - C) * M",
|
||
"The directory containing classification/regularization images.": "包含分类/正则化图像的目录",
|
||
"The directory containing training images.": "包含训练图像的目录",
|
||
"the directory in which your mask video is located.": "视频蒙版所在目录",
|
||
"the directory / URL at which your video file is located for Video Input mode only": "视频文件所在的目录/链接，仅适用于视频输入模式",
|
||
"The existing prompt and negative prompt fields are ignored.": "会使现有的正向提示词和反向提示词段被忽略。",
|
||
"The frames per second that the video will run at": "视频的每秒播放帧数",
|
||
"The Guided images mode exposes the following variables for the prompts and the schedules:": "图像引导模式为提示词和调度计划提供以下变量：",
|
||
"The height of the output images, in pixels (must be a multiple of 64)": "输出图像的高度（像素）（必须能整除于 64）",
|
||
"The learning rate scheduler to use. All schedulers use the provided warmup time except for 'constant'. For dadapt_with_warmup it 10% total steps is recommended. You may need to add additional epochs to compensate.": "所用的学习率调度器。所有调度器使用默认的预热时间 (除 ‘constant’ 外) 。对于自带预热的 dadapt ，推荐设置为总步数的 10% 。可能需要增加额外的 Epoches 进行补偿。",
|
||
"the location of images to create the video from, when use_manual_settings is checked": "当 使用手动设置 选项选中时, 用于创建视频的图像位置",
|
||
"the maximum number of output images to be created": "所需要生成的最大输出图像数",
|
||
"The model to train.": "要训练的模型",
|
||
"The number of Perlin noise octaves, that is the count of P-noise iterations. Higher values will make the noise more soft and smoke-like, whereas lower values will make it look more organic and spotty. It is limited by 8 octaves as the resulting gain will run out of bounds.": "柏林噪声倍频程数，即柏林噪声迭代次数。数值越大，噪点越柔和，越像烟雾；数值越小，噪点越有机，越有斑点。最大限制为 8 倍频程，因为更高倍数产生的增益将超出范围。",
|
||
"The number of steps per image (Epoch) to train the text encoder for. Set 0.5 for 50% of the epochs": "每幅图像训练文本编码器 (TE/CLIP) 的步数。设置 0.5 相当于 50% 的 Epochs 。",
|
||
"The number of steps to use when generating classifier/regularization images.": "生成分类/正则化图像时使用的步数。",
|
||
"then use": "然后使用",
|
||
"The other site allows for making keyframes using": "另一方面，允许关键帧使用 ",
|
||
"the pan effect angle": "偏移效果角度",
|
||
"the path to a custom settings file": "自定义设置文件的路径",
|
||
"The path to a txt file to use for sample prompts. Use [filewords] or [name] to insert class token in sample prompts": "用于生成样本图像的 txt 文本文件路径。使用 [filewords] 或 [name] 以在样本图像提示词中插入类别词元",
|
||
"The path to the concepts JSON file, or a JSON string.": "储存概念的 JSON 文件的路径，或 JSON 字符串。",
|
||
"the path to your init image": "初始化图像的路径",
|
||
"the path to your mask image": "蒙版文件的路径",
|
||
"the path/ URL to an audio file to accompany the video": "视频附带的音频文件的路径 / 链接",
|
||
"The position in postprocess at which this script will be executed; 0 means it will be executed before any scripts, 99 means it will probably be executed last.": "本脚本在后处理进程中的执行时机; 0 意味着在所有脚本之前执行, 99 意味着可能在最后执行",
|
||
"The process of creating a video can be divided into the following stages.": "创作视频需要以下几个步骤。",
|
||
"The prompt to use to generate a sample image": "用于生成样本图像的正向提示词",
|
||
"The prompt to use when generating preview images.": "用于生成预览图像的提示词。",
|
||
"The rate at which the model learns. Default is 2e-6. For optimizers with D-Adaptation recommended learning rate is 1.0": "模型的学习速度。默认设置为 2e-6 。若使用 D-Adaptation 的优化器，推荐学习率设置为 1.0 。",
|
||
"There are a lot of special things build in, based on various research papers. Just try it, and let it surprise you.": "根据各种研究论文构建了许多特殊效果。尽管试一下，让它给你带来惊喜。",
|
||
"There are an immense number of image types, not only paintings and photo's, but also isometric renders and funko pops.\nYou can however, overwrite it with the most popular ones.": "大量的图像类型，不仅有画作和照片，还有 等距/等轴渲染 和 Funko Pops (玩具人偶) 。\n不过你可以用最流行的图像类型覆盖它。",
|
||
"There is *no* Batch mode like in vanilla deforum. Please Use the txt2img tab for that.": "本插件没有批处理模式，请使用文生图选项卡",
|
||
"the required timestamp to reference when resuming. Currently only available in 2D & 3D mode, the timestamp is saved as the settings .txt file name as well as images produced during your previous run. The format follows: yyyymmddhhmmss - a timestamp of when the run was started to diffuse.": "恢复时需要指定的时间戳。目前仅支持在 2D 和 3D模式中可用，该时间戳在中断之前的图像生成过程中所保存的 settings.txt 中。参数格式如下: yyyymmddhhmmss - 开始运行本插件时会自动生成一个时间戳",
|
||
"The resolution of input images. When using bucketing, this is the maximum size of image buckets.": "输入图像的分辨率。启用切分图像时，这也是图像切分的最大尺寸。",
|
||
"The results are stored in timestamp_prompts.txt.": "将结果保存在 timestamp_prompts.txt 中。",
|
||
"the roll effect angle": "所旋转的角度（X轴，一般性指水平）",
|
||
"These can be used to add textual inversion and LoRA’s. They can also be used to add your models trigger words.": "这里用来添加 嵌入式(T.I. Embedding) 和 LoRA 。同样可以用来添加模型触发词。",
|
||
"The seed to use when generating samples. Set to -1 to use a random seed every time.": "生成样本时使用的随机数种子。设置为 -1 随机使用种子。",
|
||
"The seed to use when generating the validation sample image. -1 is not supported.": "生成验证样本图像时使用的种子。不能设置 -1。",
|
||
"the seed value will increment by 1 for each subsequent frame of the animation": "动画每完成一帧，种子值都将以 1 递增。",
|
||
"the seed will remain fixed across all frames of animation": "动画中所有帧的随机种子将被固定",
|
||
"the seed will remain fixed across all frames of animation. **NOT RECOMMENDED.** Unless you know what you are doing, it will *deep fry* the pictures over time": "种子将在动画的所有帧生成中保持不变。 **不推荐** 除非你确切知道自己在做什么, 随着时间的推移，图像会像 ”烧焦“ 一样。",
|
||
"The smaller this value, the narrower the keyframe spacing, and if set to 0, the keyframes will be equally spaced at the value of [Minimum keyframe gap].": "这个值越小，关键帧的间隔就越小，如果设置为0，关键帧的间隔将与[最小关键帧间隔]的值相同。",
|
||
"the tilt effect angle": "所翻转的垂直角度（Y轴）",
|
||
"The type of memory attention to use. 'Xformers' will provide better performance than flash_attention, but requires a separate installation.": "启用的内存注意力类型。\"Xformers\" 比 \"flash attention\" 性能更好，但需要单独安装。",
|
||
"The untranslated characters will be translated automatically and will not affect the old translations. Use the function in the lower right corner to easily check and quickly modify the current translation.1,Save the setting;2,Click start button;3,Reload your browser.": "未翻译的提示词将自动翻译，不会影响已翻译过的提示词。使用右下方的功能按钮可以快速检查和修改当前的翻译。1.保存设置；2.点击启动按钮；3.重载浏览器。",
|
||
"The URL to the model on huggingface. Should be in the format of 'developer/model_name'.": "Huggingface 模型的 URL。格式应为 'developer/model_name'。",
|
||
"The WebSocket is currently": "WebSocket 当前状态为",
|
||
"The weight decay for the Text Encoder. Values closer to 0 closely match your training dataset, and values closer to 1 generalize more and deviate from your training dataset. Default is 1e-2. For Dreambooth, recommended value is same as AdamW Weight Decay. For Lora recommended value is 0.01-0.02 higher than AdamW Weight Decay.": "文本编码器的权重衰减。越接近 0 的值越和训练数据集匹配，而越接近 1 的值则越泛化且偏离训练数据集。默认 1e-2。对于 Dreambooth 推荐设置的值和 AdamW 权重衰减相同。对于 Lora，推荐设置的值比 AdamW Weight Decay 高 0.01-0.02 。",
|
||
"the whole folder, generated before, not just the output folder": "提前建立好的整个工程目录，而不仅仅是输出文件夹",
|
||
"The width of the focus region in pixels": "对焦区域的宽度 (单位: 像素)",
|
||
"The width of the output images, in pixels (must be a multiple of 64)": "输出图像的宽度（像素，必须能整除于 64）",
|
||
"Thigh": "大腿长度",
|
||
"Third column (reference) image": "第三列 (参考) 图像",
|
||
"[this]": "[这里]",
|
||
"This extension works well with text captions in comma-separated style (such as the tags generated by DeepBooru interrogator).": "使用以逗号分隔的描述会让插件更好的工作。（比如由 DeepBooru 反推生成的标签）",
|
||
"This generator will generate a complete full prompt for you, based on randomness. You can increase the slider, to include more things to put into the prompt. \nRecommended is keeping it around 3-7. Use 10 at your own risk.": "本生成器会根据随机等级为你生成一段完整的提示词。可以通过滑块提高数值，以在提示词中包含更多的东西。\n建议保持在3-7左右。使用10的话后果自负。",
|
||
"This is an extra stage.": "这是一个额外的步骤。",
|
||
"This is a technique to reduce memory usage by clearing activations of certain layers and recomputing them during a backward pass. Effectively, this trades extra computation time for reduced memory usage.": "一种通过清除部分层的激活并在反向传播时重新计算来减少显存使用量的技术。实际是用额外的计算时间换取更少的显存使用量。",
|
||
"This is ignored if neither batch run or ebsynth are checked": "如果批量处理或 Ebsynth 模式都没有被选中，此项将被忽略",
|
||
"(this is optional. Perform color correction on the img2img results and expect flickering to decrease. Or, you can simply change the color tone from the generated result.)": "（此步骤可选。对图生图的结果进行颜色校正，可能会减少视频闪烁。或者，你也可以简单地在生成结果中调色。）",
|
||
"This is the total number of training steps that will be performed on each instance image.": "在每张图像上执行的训练步数总数。",
|
||
"This is your models list.": "这是您的模型列表。",
|
||
"This mode works ONLY with 2D/3D animation modes. Interpolation and Video Input modes aren't supported.": "此模式仅适用于2D/3D动画模式。不支持帧插值和视频输入模式。",
|
||
"this option renders N times before the final render. it is suggested to lower your steps if you up your redo. seed is randomized during redo generations and restored afterwards": "在最终渲染前进行 N 次渲染。如果增加重做次数，建议降低迭代步数。随机数种子在重做过程中被随机化，并在重做后被恢复。",
|
||
"this option takes twice as long because it generates twice in order to capture the optical flow from the previous image to the first generation, then warps the previous image and redoes the generation": "该选项需要两倍生成时间，因为它会生成两次图像，以捕获从上一幅图像到第一次生成的光流，接着变形上一幅图像并重新生成",
|
||
"This page allows you to change default values in UI elements on other tabs.": "本页面允许你去修改其他标签页中的 UI 默认设置",
|
||
"This panel is for those who want to upload mask to ControlNet inpainting. It is not part of the SAM feature. It might be removed someday when ControlNet support uploading image and mask. It serves as a temporarily workaround to overcome the unavailability of image with mask uploading feature in ControlNet extension.": "此面板是为想把蒙版上传到 ControlNet 重绘的人准备的。这不是 SAM 的功能。当某天 ControlNet 支持上传图像和蒙版时，此功能可能会删除。这是一个临时解决方案，以解决 ControlNet 不能上传蒙版的问题。",
|
||
"This preset affects?": "该预设中包含？",
|
||
"This regular expression will be used extract words from filename, and they will be joined using the option below into label text used for training. Leave empty to keep filename text as it is.": "该正则表达式将用于从文件名中提取单词，并将它们合并到用于训练的标签文本中。留空以保持文件名文本不变。",
|
||
"This requires Controlnet 1.1 extension and the tile resample model, install this if you haven't\nIn settings for Controlnet, enable \"Allow other script to control this extension\"": "这需要 ControlNet 1.1 插件和 tile resample 预处理器对应的模型，如果没有请安装！\n在设置页面的 ControlNet 设置中启用 ”允许其他脚本控制此扩展“ 。",
|
||
"This requires the Ultimate SD Upscale extension, install this if you haven't": "这需要 Ultimate SD Upscale 插件，如果没有请安装！",
|
||
"This script is deprecated. Please use the full Deforum extension instead.": "此脚本已废弃。请改用完整的 Deforum 扩展。",
|
||
"This string will be used to join split words into a single line if the option above is enabled.": "如果启用了上述选项，则此处的字符会用于将拆分的单词接合为同一行",
|
||
"this subreddit": "此页面",
|
||
"This was originally a bug in the first release when using multiple batches, now brought back as a feature.\nRaised by redditor drone2222, to bring this back as a toggle, since it did create interesting results. So here it is.": "这原本是第一个版本中使用多批次时的一个 bug ，现在作为一个功能回归。\n由 redditor: drone2222提出，让它作为一个切换选项功能回归，因为它确实创造了有趣的结果。就是这样一个功能。",
|
||
"This way, you can create unlimited variants of a subject.": "通过这种方法，你可以创建同一个主题的无数变种图像。",
|
||
"This way, you don’t ever have to add it manually again. This file won’t be overwritten during upgrades.": "通过这个方法，就不需要每次都手动添加。这个文件不会在本插件更新时被覆盖。",
|
||
"This will produce one prompt for each colour in the wildcard.txt file.": "这会为 colours.txt 中的每个颜色产生一条提示词",
|
||
"This will produce the following prompts:": "如此会产生如下提示词",
|
||
"This will produce three prompts, one for each color. The prompt tag is used to mark the text that will be used as the prompt. If no prompt tag is present then only one prompt is assumed": "这样设置会产生三条提示词，每个颜色各一条；\n prompt 标签用于标记作为提示词的文本；\n 如果没有 prompt 标签则默认为仅一条提示词",
|
||
"This will randomly choose one of the three colors.": "将会从三种颜色中随机选一个",
|
||
"Those settings are heavy on DOM modification and might conflict with some others extensions": "这些设置对 DOM 修改程度很大, 可能与其他扩展冲突",
|
||
"threshold": "threshold (阈值)",
|
||
"Threshold": "阈值",
|
||
"Threshold A": "阈值 A",
|
||
"Threshold B": "阈值 B",
|
||
"Thresholding Mode": "阈值模式",
|
||
"Threshold of delta frame edge": "关键帧间隔差异阈值",
|
||
"Threshold schedule": "阈值调度计划",
|
||
"Threshold (Use only when basis is absolute)": "阈值 (仅在基准设为绝对时可用)",
|
||
"Threshold Value Lower": "阈值下限",
|
||
"Threshold Value Upper": "阈值上限",
|
||
"thumbs": "缩略视图",
|
||
"Tile": "Tile (分块)",
|
||
"tile_colorfix": "tile_colorfix (分块 - 固定颜色)",
|
||
"tile_colorfix+sharp": "tile_colorfix+sharp (分块 - 固定颜色 + 锐化)",
|
||
"tile division BG Removers": "分块化背景去除",
|
||
"tile_gaussian": "Tile_Gaussian (拼贴画模糊处理)",
|
||
"tile height": "分块高度",
|
||
"Tile height": "分块高度",
|
||
"Tile overlap": "分块重叠像素宽度",
|
||
"Tile overlap for ESRGAN upscalers.": "ESRGAN 超分辨率的分块块重叠像素大小",
|
||
"Tile overlap for SCUNET upscalers.": "SCUNET 超分辨率的分块块重叠像素大小",
|
||
"Tile overlap, in pixels for ESRGAN upscalers. Low values = visible seam.": "ESRGAN 超分辨率的分块块重叠像素大小。数值越低意味着分块间的接缝越明显",
|
||
"Tile overlap, in pixels for SCUNET upscalers. Low values = visible seam.": "SCUNET 超分辨率的分块重叠像素大小。数值越低意味着分块间的接缝越明显",
|
||
"Tile overlap, in pixels for SwinIR. Low values = visible seam.": "SwinIR 的分块重叠像素大小。数值越低意味着分块间的接缝越明显",
|
||
"tile_resample": "tile_resample (分块 - 重采样)",
|
||
"Tile size for all SwinIR.": "适用所有 SwinIR 系算法的分块尺寸",
|
||
"Tile size for ESRGAN upscalers.": "ESRGAN 使用的分块尺寸",
|
||
"Tile size for ESRGAN upscalers. 0 = no tiling.": "ESRGAN 使用的分块尺寸 。数值设为0意味着不分块",
|
||
"Tile size for SCUNET upscalers.": "SCUNET 超分辨率的分块尺寸",
|
||
"Tile size for SCUNET upscalers. 0 = no tiling.": "SCUNET 超分辨率的分块尺寸。数值设为0意味着不分块",
|
||
"tile width": "分块宽度",
|
||
"Tile width": "分块宽度",
|
||
"Tiling": "平铺图 (Tiling)",
|
||
"Tiling direction": "分块方向",
|
||
"Tilt adjustment threshold": "俯仰调节阈值",
|
||
"tilt canvas up/down in degrees per frame": "以每帧为单位向上/向下倾斜画布",
|
||
"Tilt shift": "移轴 (镜头)",
|
||
"Time": "时间",
|
||
"Time in ms to wait before triggering completion again": "再次显示自动补全标签的等待时间 (单位: 毫秒)",
|
||
"Time in ms to wait before triggering completion again (Requires restart)": "再次显示自动补全标签的等待时间 (单位: 毫秒) (需保存并重启UI)",
|
||
"timestamp": "时间戳",
|
||
"Time taken:": "用时:",
|
||
"Tips": "小提示",
|
||
"title": "标题",
|
||
"Title": "职位",
|
||
"to": "到",
|
||
"To apply, go to quick set. Save now works immediately in other tab without restart, filters out non-common between tabs.": "要应用，请转到快速设置。现在保存可以立即在其他选项卡中工作，无需重新启动，过滤掉选项卡之间的不常见内容。",
|
||
"to discuss about Cozy Nest": "去讨论关于 Cozy Nest 的话题~",
|
||
"To enable, check use_mask in the Init tab": "如需启用，请检查是否启用初始化选项卡中的 启用蒙版 选项",
|
||
"To first difference": "补全到首次差异",
|
||
"to (full path)": "到 (输入完整路径)",
|
||
"Toggle overlap": "重叠切换",
|
||
"🤗 token": "🤗 令牌",
|
||
"Token": "词元",
|
||
"Tokenize": "拆分词元",
|
||
"Token Length": "词元长度",
|
||
"Token Merging": "高分修复TOME",
|
||
"Token Merging - Max downsample": "TOME - 最大降采样",
|
||
"Token merging ratio": "Token 合并比率",
|
||
"Token Merging - Ratio": "TOME 合并比率",
|
||
"Token merging ratio for high-res pass": "高分层的 Token 合并比率",
|
||
"Token merging ratio for img2img": "图生图的 Token 合并比率",
|
||
"Token Merging (ToMe)": "词元合并 (ToMe)",
|
||
"To Language": "目标语言",
|
||
"ToMe for Hires. fix": "为高分辨率修复启用 Tokens 合并优化",
|
||
"ToMe Merging Ratio": "ToMe 合并比率",
|
||
"Tone Curve": "色调曲线",
|
||
"To next folder level": "补全到下一级文件夹",
|
||
"Toolkit": "模型工具箱",
|
||
"top": "顶部",
|
||
"top-bottom": "上 - 下",
|
||
"top_centered": "顶部居中",
|
||
"to share your creations and suggestions.": "来分享你的创意和提出意见.",
|
||
"(Total)": "(合计)",
|
||
"Total num of layers (reload required)": "图层总数 (需要重启)",
|
||
"Total num of point for curve (reload required)": "曲线点总数 (需要重启)",
|
||
"To use an alternate VAE, you can specify the path to a directory containing a pytorch_model.bin representing your VAE.": "若要使用其他 VAE ，可以指定一个包含代表 VAE 的 pytorch_model.bin 目录的路径。",
|
||
"(To work correctly in firefox, turn off 'Automatically search the page text when typing' in the browser settings)": "(如想在 Firefox 浏览器中正常工作，请在浏览器设置中关闭 \"若在文本框外输入，则在页面中查找文本\" 选项)",
|
||
"Train": "训练",
|
||
"Train an embedding or Hypernetwork; you must specify a directory with a set of 1:1 ratio images": "训练嵌入式或超网络模型；必须指定一个具有一组 1:1 宽高比图像的数据集目录",
|
||
"Train EMA": "训练 EMA",
|
||
"Train Embedding": "训练嵌入式模型",
|
||
"Train Hypernetwork": "训练超网络",
|
||
"Train Imagic Only": "仅训练 Imagic",
|
||
"training": "训练相关",
|
||
"Training": "训练",
|
||
"Training dataset tags": "数据集的训练标签",
|
||
"Training info": "训练信息",
|
||
"Training parameters": "训练参数",
|
||
"Training Prompts": "训练提示词",
|
||
"Training Steps Per Image (Epochs)": "每张图的训练步数 (Steps)",
|
||
"Training Wizard (Object/Style)": "训练向导 (物件/风格)",
|
||
"Training Wizard (Person)": "训练向导 (人物)",
|
||
"Train Model": "训练模型",
|
||
"Train multiple concepts from a JSON file or string.": "从 JSON 文件或字符串训练多个概念。",
|
||
"Train Text Encoder": "训练文本编码器",
|
||
"Train UNET": "训练 U-Net",
|
||
"Trajectory": "运动轨迹",
|
||
"Transform Center X": "旋转中心点 X 轴",
|
||
"Transform Center Y": "旋转中心点 Y 轴",
|
||
"translate": "翻译",
|
||
"Translate": "翻译",
|
||
"translated fail:": "翻译失败：",
|
||
"Translated Negative Prompt": "反向提示词翻译",
|
||
"Translated Prompt": "提示词翻译",
|
||
"Translated Status": "翻译状态",
|
||
"translated text": "翻译后文本",
|
||
"Translated Text": "翻译后文本",
|
||
"Translate Negative Prompt": "翻译反向提示词",
|
||
"Translate Prompt": "翻译提示词",
|
||
"Translate prompt words into:": "将提示词翻译为：",
|
||
"Translate: x, y, z": "移动幅度：x, y, z",
|
||
"Translation display order": "翻译显示顺序",
|
||
"Translation filename": "翻译文件名",
|
||
"Translation file uses old 3-column translation format instead of the new 2-column one": "翻译文件使用旧的三栏式翻译格式，而不是新的二栏式格式",
|
||
"Translation First": "译文在上",
|
||
"Translation Service Setting": "翻译服务设置",
|
||
"Translation X": "平移 X",
|
||
"Translation Y": "平移 Y",
|
||
"Translation Z": "平移 Z",
|
||
"Transparent": "透明",
|
||
"[transparent-background]": "[透明背景]",
|
||
"transparent-background": "透明背景",
|
||
"transparent-background AND clipseg": "透明背景和 CLIP 分割",
|
||
"transparent-background options": "透明背景选项",
|
||
"Transparent PNG": "透明PNG",
|
||
"(triggers when a tensor with NaNs is produced in VAE; disabling the option in this case will result in a black square image)": "(在 VAE 中生成带有 NaNs 的 tensor 时触发，这种情形下若本选项禁用会导致黑图)",
|
||
"Trigger Word": "触发词",
|
||
"Trim mask by sketch": "根据草图修剪蒙版",
|
||
"Triple sum:A*(1-alpha-beta)+B*alpha+C*beta": "三重加权和: A*(1-α-β)+B*α+C*β",
|
||
"True": "是",
|
||
"Truncate tags by token count": "按词元长度截断标签",
|
||
"Truncate tags by token count.": "按词元长度截断标签",
|
||
"Try to add known trigger words for LORA/LyCO models": "尝试为 LoRA/LyCORIS 模型添加已知触发词",
|
||
"Tuning": "调节",
|
||
"Turn on pin_memory for DataLoader. Makes training slightly faster but can increase memory usage.": "为数据加载器 (DataLoader) 启用 pin_memory 参数，以提升内存占用的代价提高训练速度",
|
||
"Tutorial": "教程",
|
||
"Tweening frames schedule": "中间计算帧调度计划",
|
||
"txt2img": "文生图",
|
||
"TXT2IMG": "文生图",
|
||
"txt2img-grids": "文生图 (网格)",
|
||
"txt2img history": "文生图历史记录",
|
||
"txt2img/img2img UI item order": "文生图/图生图界面参数组件顺序",
|
||
"Type": "类型",
|
||
"type of image": "图像类型",
|
||
"UI related": "UI 界面相关",
|
||
"UI tab order": "UI 标签栏顺序",
|
||
"ui text": "UI 文本",
|
||
"ukiyo-e": "ukiyo-e (浮世绘)",
|
||
"ultrafast": "极致速度",
|
||
"ultrawide": "ultrawide (超宽图)",
|
||
"Uncheck all copies": "取消勾选所有选择",
|
||
"U-Net features": "U-Net 特征值",
|
||
"UNet Weight 1": "UNet 权重 1",
|
||
"UNet Weight 2": "UNet 权重 2",
|
||
"UNet Weight 3": "UNet 权重 3",
|
||
"UNet Weight 4": "UNet 权重 4",
|
||
"UNet Weight 5": "UNet 权重 5",
|
||
"Unfreeze Model": "解冻模型",
|
||
"Unfreeze seed": "不固定种子",
|
||
"Unfreezes model layers and allows for potentially better training, but makes increased VRAM usage more likely.": "解冻模型分层来获得更好的训练效果，但更有可能只是单纯增加显存的使用量。",
|
||
"Unified Predictor-Corrector Framework for Fast Sampling of Diffusion Models": "用于扩散模型快速采样的统一预测-校正框架",
|
||
"uniform": "均匀 (uniform)",
|
||
"Uniform noise covers the entire frame. It somewhat flattens and sharpens the video over time, but may be good for cartoonish look. This is the old default setting.": "均匀噪声覆盖整个画面。随着时间的推移，它会在一定程度上使视频变得平滑和锐利，但也许适合卡通效果。曾是旧版本的默认设置。",
|
||
"UniPC lower order final": "最后几步采样应用低阶 UniPC 采样方法",
|
||
"UniPC order": "UniPC 低阶步数",
|
||
"UniPC Order": "UniPC 低阶步数",
|
||
"UniPC order (must be < sampling steps)": "UniPC 的预测校正次数 (需小于采样步数)",
|
||
"UniPC skip type": "UniPC 跳过类型",
|
||
"UniPC variant": "UniPC 变体",
|
||
"unknown": "未知",
|
||
"Unlink seed from prompt": "将随机种子与提示词解绑",
|
||
"Unload": "卸载",
|
||
"Unload all interrogate models": "卸载所有反推模型",
|
||
"Unload all models from memory": "从内存中卸载所有模型",
|
||
"unload model": "卸载模型",
|
||
"Unload model": "卸载模型",
|
||
"Unload Model": "卸载模型",
|
||
"Unload model after running": "反推完成后卸载模型",
|
||
"Unload models": "卸载模型",
|
||
"Unload SD checkpoint to free VRAM": "卸载 Stable Diffusion 模型以释放显存",
|
||
"Unload VAE and CLIP from VRAM when training": "训练时从显存中卸载 VAE 和 CLIP 模型",
|
||
"Unnecessary Javascript file": "多余的 Javascript 文件",
|
||
"unzip the file to": "将文件解压缩到",
|
||
"up": "上",
|
||
"Upcast cross attention layer to float32": "将交叉关注层向上转换到 float32",
|
||
"Upcast cross attention layer to FP32": "将交叉关注层向上转换到 FP32",
|
||
"update": "更新",
|
||
"Update": "更新",
|
||
"Update Dataset": "上传数据集",
|
||
"Update directory names in database": "更新数据库中的文件夹名字",
|
||
"Update Extension and Restart": "更新扩展并重启",
|
||
"Update installed extensions": "更新已安装扩展",
|
||
"update list": "更新列表",
|
||
"Update Mask": "更新蒙版",
|
||
"update time": "按更新时间",
|
||
"uploaded video FPS": "上传视频的帧率",
|
||
"uploaded video resolution": "上传视频的分辨率",
|
||
"uploaded video total frame count": "上传视频的总帧数",
|
||
"Upload image": "上传图像",
|
||
"Upload Image or .cni file": "上传图像或 .cni 文件",
|
||
"Upload mask": "上传蒙版图片",
|
||
"Upload mask here cus gradio": "在此上传蒙版",
|
||
"Upload mask image": "上传蒙版图片",
|
||
"Upload Mask to ControlNet Inpainting": "上传蒙版到 ControNet 重绘",
|
||
"Upload OR TTS": "上传音频或 TTS",
|
||
"Upload prompt inputs": "上传提示词输入文件",
|
||
"Upper Arm": "上臂长度",
|
||
"Upscale": "图像放大",
|
||
"Upscale Before Restoring Faces": "放大后再进行面部修复",
|
||
"Upscale by": "放大倍数",
|
||
"Upscale factor": "放大倍数",
|
||
"Upscale height": "放大高度",
|
||
"Upscale height to": "将高度放大到",
|
||
"Upscale image with IMG2IMG": "通过图生图放大图像",
|
||
"Upscale method": "放大方法",
|
||
"Upscale model": "超分模型",
|
||
"upscale output imgs when run is finished": "运行结束后放大输出图像",
|
||
"Upscaler": "放大算法",
|
||
"upscaler 1": "放大算法 1",
|
||
"Upscaler 1": "放大算法 1",
|
||
"upscaler 2": "放大算法 2",
|
||
"Upscaler 2": "放大算法 2",
|
||
"Upscaler 2 vis.": "放大算法 2 可见程度",
|
||
"Upscaler 2 visibility": "放大算法 2 强度",
|
||
"Upscale ratio": "放大倍率",
|
||
"Upscale resize": "放大倍数",
|
||
"Upscaler for img2img": "图生图放大算法",
|
||
"Upscaler scale": "放大倍数",
|
||
"Upscaler visibility (if scale = 1)": "放大强度（如果倍率=1）",
|
||
"*Upscale uploaded video*": "*放大已上传的视频*",
|
||
"Upscale width": "放大宽度",
|
||
"Upscale width to": "将宽度放大到",
|
||
"Upscaling": "放大",
|
||
"URL": "地址",
|
||
"URL for extension's git repository": "扩展的 git 仓库网址",
|
||
"Usage guide": "使用指南",
|
||
"Use": "使用 ",
|
||
"use 256/512 model?": "使用 256 或 512 分辨率模型？",
|
||
"Use a": "启用一个",
|
||
"Use A1111 resize mode when input is from A1111.": "当输入图来自 A1111 时，使用 A1111 的缩放模式",
|
||
"Use a grayscale image as a mask on your init image. Whiter areas of the mask are areas that change more.": "在初始化图像上使用灰度图像作为蒙版。蒙版区域中越接近白色变化越大",
|
||
"Use alpha as mask": "启用透明度蒙版",
|
||
"Use an": "使用一个",
|
||
"Use an empty output directory to save pictures normally instead of writing to the output directory.": "输出图像到一个空目录，而非设置里指定的输出目录",
|
||
"Use another image as ControlNet input": "使用另外的图像输入 ControlNet",
|
||
"Use another image as mask": "使用另外的图像作为遮罩",
|
||
"Use a two step process to partially create an image at smaller resolution, upscale, and then improve details in it without changing composition": "两步生成\n以较小的分辨率生成初步图像后再放大\n然后在不改变构图的情况下改善细节",
|
||
"Use automatic height for gallery (requires Gradio >= 3.36.0)": "启用画廊自动高度 (需要 Gradio 版本 >= 3.36.0)",
|
||
"Use base prompt": "使用基础提示词 (Base Prompt)",
|
||
"Use BLIP for caption": "使用 BLIP 生成标签 (自然语言)",
|
||
"Use common negative prompt": "使用常见反面提示词 (Common Negative Prompt)",
|
||
"Use common prompt": "使用常见提示词 (Common Prompt)",
|
||
"Use Concepts List": "使用概念列表",
|
||
"Use Control Net inpaint model": "使用 ControlNet 的 inpait 模型",
|
||
"Use CPU for SAM": "使用 CPU 进行 SAM 处理",
|
||
"Use CPU Only (SLOW)": "只用 CPU (很慢)",
|
||
"Use cross attention optimizations while training": "训练时开启 Cross Attention 优化",
|
||
"Use custom colors": "使用自定义颜色",
|
||
"Use custom DepthMap": "使用自定义深度图",
|
||
"Use Custom Threshold (Booru)": "使用自定义阈值 (Booru)",
|
||
"Use Custom Threshold (WDv1.4 Tagger)": "使用自定义阈值 (WDv1.4 标签器)",
|
||
"Use deepbooru for caption": "使用 Deepbooru 生成标签",
|
||
"Use delta values for movement parameters": "使用增量值作为运动参数",
|
||
"Use Depth Map If exists in /video_key_depth": "使用深度图（如果存在/video_key_depth目录）",
|
||
"Use depth warping": "启用深度变形",
|
||
"(used for refiner model negative prompt)": "(用于 refiner 模型的反向提示词)",
|
||
"(used for refiner model prompt)": "(用于 refiner 模型的正向提示词)",
|
||
"Used for securing the Web API. Click the refresh button to the right to (re)generate your key, the trash icon to remove it.": "用于保护 Web API 的安全。点击右侧刷新按钮可 (重新) 生成密钥，点击垃圾桶按钮可移除密钥。",
|
||
"Use different seed for each picture": "为每张图片使用不同随机种子",
|
||
"Use dropdown for sampler selection instead of radio group": "采样器列表处使用下拉菜单取代单选框",
|
||
"Use dropout": "使用 dropout",
|
||
"Use EMA": "启用 EMA",
|
||
"Use EMA for finetuning": "使用 EMA 权重进行微调",
|
||
"Use EMA for prediction": "使用 EMA 权重预测",
|
||
"Use EMA Weights for Inference": "使用 EMA 权重进行推理",
|
||
"use Face Crop img2img": "使用图生图脸部修复",
|
||
"Use Fast Mode(It will be faster, but the quality of the mask will be lower.)": "使用快速模式（它会更快，但蒙版质量会较低）。",
|
||
"Use FP16 or BF16 (if available) will help improve memory performance. Required when using 'xformers'.": "使用 FP16 或 BF16 (如可用) 有助于提高内存性能。启用 \"xformers\" 时需要。",
|
||
"Use half floats": "启用半精度浮点",
|
||
"Use init": "启用初始化",
|
||
"Use init image as video": "使用初始图像作为视频",
|
||
"Use init image instead of video. Doesn't require generation of inputframes.": "使用初始图像代替视频。无需生成输入帧",
|
||
"Use inpaint width/height": "启用自定义重绘宽高",
|
||
"Use input image's alpha channel as mask": "使用输入图像的透明度通道作为遮罩",
|
||
"Use Interrogator Caption": "使用反推打标",
|
||
"Use Jit": "使用实时产出模式",
|
||
"Use kohya-ss's finetuning metadata json": "使用 kohya-ss 的微调 metadata json",
|
||
"Use local groundingdino to bypass C++ problem": "启用本地 Groundingdino 以绕过 C++ 问题",
|
||
"Use LORA": "使用 LoRA",
|
||
"Use Lora in uc diffusion model": "在反向扩散模型中使用 LoRA",
|
||
"Use Lora in uc text model encoder": "在反向文本编码器中使用 LoRA",
|
||
"Use lossless compression for webp images": "对 WebP 图像使用无损压缩",
|
||
"Use LyCoris handler for all Lora types": "使用 LyCORIS 处理器加载所有 Lora 模型",
|
||
"Use main sampler": "使用文生图采样方法",
|
||
"Use mask": "启用蒙版",
|
||
"Use mask as output alpha channel": "使用遮罩作为透明度通道输出",
|
||
"Use mask video": "使用视频蒙版",
|
||
"use MBW": "使用分块合并",
|
||
"Use mid-control on highres pass (second pass)": "进行高分辨率修复时使用中间层控制 (mid-control)",
|
||
"Use minimal area (for close faces)": "使用最小区域（适用近处的脸）",
|
||
"Use minimal area for face selection": "用最小面积进行脸部选择",
|
||
"Use noise mask": "启用噪声蒙版",
|
||
"Use old aspect ratio formula": "使用旧版纵横比格式",
|
||
"Use old emphasis implementation. Can be useful to reproduce old seeds.": "使用旧的强调符号解析器，可用于复现早期种子结果 (2022-09-29)",
|
||
"Use old karras scheduler sigmas (0.1 to 10).": "对于 Karras 调度器使用旧的 sigma 值范围 (0.1 - 10) (2023-01-01)",
|
||
"Use only-mid-control on high-res. fix (second pass)": "在高分辨率修复 (第二通道) 中仅使用中间层 (mid-control) 控制",
|
||
"use optical flow estimation for your in-between (cadence) frames": "对中间 (间隔) 帧启用光流估计",
|
||
"Use optimized images in the thumbnail interface (significantly reduces the amount of data transferred)": "在缩略图界面中使用优化的图像 (显著减少传输数据量)",
|
||
"Use original name for output filename during batch process in extras tab": "在后期处理选项卡中的批量处理过程中，使用原始名称作为输出文件名",
|
||
"Use output of nth layer from back of text encoder (n>=1)": "使用文本编码器 (TE/CLIP) 后第 n 层的输出 (n>=1)",
|
||
"Use PNG alpha channel as loss weight": "使用 PNG 图片的透明通道作为 loss 权重",
|
||
"Use Preprocess image If exists in /controlnet_preprocess": "使用预处理图像（如果存在/controlnet_preprocess目录）",
|
||
"use prompt and setting by image": "按图像信息使用提示词和设置",
|
||
"Use prompt from preview image": "一键使用本模型预览图所使用的提示词",
|
||
"Use random seeds for sub-generations when doing a rolling generation (WARNING!!! The result will be non-deterministic!!!)": "在进行梯度放大倍数生成时, 对子代生成应用随机种子 (警告!!! 图像结果随机无法复现!!!)",
|
||
"Use raw CLIP token to calculate token count (without emphasis or embeddings)": "使用原始 CLIP 词元数计算词元长度（不含 emphasis 或 embeddings）",
|
||
"Use recursive with glob pattern": "使用 glob 模式递归搜索",
|
||
"Use recycle bin when deleting images": "将删除的图片放入回收站而非直接彻底删除",
|
||
"Use regex": "使用正则表达式",
|
||
"User interface": "用户界面",
|
||
"username": "用户名",
|
||
"Username": "用户名",
|
||
"Uses aesthetic image scorer extension to check the quality of the image.": "使用 aesthetic image scorer (美学图像评分) 插件来检测图像质量",
|
||
"Use same checkpoint": "使用相同 SD 模型",
|
||
"Use same random seed for all lines": "每行输入都使用同一个随机种子",
|
||
"Use same sampler": "使用相同采样方法",
|
||
"Use same seed for all images": "为所有图像使用同一个随机种子",
|
||
"use scale": "启用缩放",
|
||
"Use separate CFG scale": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 10th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 2nd": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 3rd": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 4th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 5th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 6th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 7th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 8th": "使用独立的提示词引导系数",
|
||
"Use separate CFG scale 9th": "使用独立的提示词引导系数",
|
||
"Use separate CLIP skip": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 10th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 2nd": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 3rd": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 4th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 5th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 6th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 7th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 8th": "使用独立 CLIP 终止层数",
|
||
"Use separate CLIP skip 9th": "使用独立 CLIP 终止层数",
|
||
"Use separate noise multiplier": "使用独立噪声参数",
|
||
"Use separate noise multiplier 10th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 2nd": "使用独立噪声参数",
|
||
"Use separate noise multiplier 3rd": "使用独立噪声参数",
|
||
"Use separate noise multiplier 4th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 5th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 6th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 7th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 8th": "使用独立噪声参数",
|
||
"Use separate noise multiplier 9th": "使用独立噪声参数",
|
||
"Use separate sampler": "使用独立采样方法",
|
||
"Use separate sampler 10th": "使用独立采样方法",
|
||
"Use separate sampler 2nd": "使用独立采样方法",
|
||
"Use separate sampler 3rd": "使用独立采样方法",
|
||
"Use separate sampler 4th": "使用独立采样方法",
|
||
"Use separate sampler 5th": "使用独立采样方法",
|
||
"Use separate sampler 6th": "使用独立采样方法",
|
||
"Use separate sampler 7th": "使用独立采样方法",
|
||
"Use separate sampler 8th": "使用独立采样方法",
|
||
"Use separate sampler 9th": "使用独立采样方法",
|
||
"Use separate steps": "使用独立迭代步数",
|
||
"Use separate steps 10th": "使用独立迭代步数",
|
||
"Use separate steps 2nd": "使用独立迭代步数",
|
||
"Use separate steps 3rd": "使用独立迭代步数",
|
||
"Use separate steps 4th": "使用独立迭代步数",
|
||
"Use separate steps 5th": "使用独立迭代步数",
|
||
"Use separate steps 6th": "使用独立迭代步数",
|
||
"Use separate steps 7th": "使用独立迭代步数",
|
||
"Use separate steps 8th": "使用独立迭代步数",
|
||
"Use separate steps 9th": "使用独立迭代步数",
|
||
"Use separate width/height": "使用独立重绘宽高",
|
||
"Use separate width/height 10th": "使用独立重绘宽高",
|
||
"Use separate width/height 2nd": "使用独立重绘宽高",
|
||
"Use separate width/height 3rd": "使用独立重绘宽高",
|
||
"Use separate width/height 4th": "使用独立重绘宽高",
|
||
"Use separate width/height 5th": "使用独立重绘宽高",
|
||
"Use separate width/height 6th": "使用独立重绘宽高",
|
||
"Use separate width/height 7th": "使用独立重绘宽高",
|
||
"Use separate width/height 8th": "使用独立重绘宽高",
|
||
"Use separate width/height 9th": "使用独立重绘宽高",
|
||
"Uses Imagic for training instead of full dreambooth, useful for training with a single instance image.": "使用 Imagic 进行训练，而不是使用完整的 Dreambooth，这对单图像训练非常有效。",
|
||
"Uses Low-rank Adaptation for Fast Text-to-Image Diffusion Fine-tuning. Uses less VRAM, saves a .pt file instead of a full checkpoint": "使用低秩微调模型进行快速的文生图扩散微调。需要的显存更小，保存一个 .pt 格式的文件而不是完整的大模型。",
|
||
"Use Smart-Steps": "优化迭代次数",
|
||
"Use Space Instead Of _": "使用 \"空格 \" 代替 \"下划线_\"",
|
||
"Use spaces instead of underscore": "使用空格代替下划线",
|
||
"Uses the lexica.art API to create random prompts.\nThe prompt in the main prompt box is used as a search string.\nLeaving the prompt box blank returns a list of completely randomly chosen prompts.\nTry it out, it can be quite fun.": "用 lexica.art API 生成随机提示词\n提示词框中的内容会作为搜索字符串\n留空提示词框会得到一组完全随机选择的提示词\n用用看，它会很有趣",
|
||
"Uses your": "使用你的",
|
||
"Use tags like [seed] and [date] to define how filenames for images are chosen. Leave empty for default.": "使用[seed]和[date]等标记来选择如何定义图像的文件名。留空使用默认值",
|
||
"Use tags like [seed] and [date] to define how subdirectories for images and grids are chosen. Leave empty for default.": "使用[seed]和[date]等标记来选择如何定义图像和网格的子目录。留空使用默认值",
|
||
"Use Text Escape": "使用文本转义",
|
||
"(use (text) to make model pay more attention to text and [text] to make it pay less attention)": "(对提示词使用 (文本) 这样的格式使模型更关注该文本, 同理, 使用 [文本] 这样的格式来减少对该文本的关注度)",
|
||
"Use the negative_prompts field to automatically append all words as a negative prompt. *Don't* add --neg in the negative_prompts field!": "使用 negative_prompts 字段自动将所有单词附加为反向提示词，不要在 negative_prempts 字段中添加 --neg ！",
|
||
"Use the wildcard in your script by typing the name of the file or copying the text from the Wildcards file text box": "通过键入文件名或从通配符文件文本框中复制文本，来将通配符应用到你的脚本中",
|
||
"Use the wildcard in your script by typing the name of the file or copying the text from the Wildcards file text box.": "通过键入文件名或从 \"通配符文件\" 文本框中复制文本来在脚本中使用通配符",
|
||
"Use this negative prompt": "使用此框填写的反向提示词",
|
||
"Use this when scanning can not find a local model on civitai": "无法通过扫描获取本地模型信息时使用此功能",
|
||
"Use Ultimate SD Upscale script instead": "使用 Ultimate SD Upscale 脚本作为替代",
|
||
"Use Upscaled": "启用放大",
|
||
"Use upscaler name as filename suffix in the extras tab": "后期处理时将超分算法名称添加到文件名后缀中",
|
||
"Use via API": "使用 via API",
|
||
"Use wildcards for negative prompts": "对反向提示词使用通配符",
|
||
"Use xformers": "使用 xformers",
|
||
"V2 Model:": "是否为 V2 模型:",
|
||
"VAE Checkpoints to cache in RAM": "保留在内存中的 VAE 模型数量",
|
||
"VAE Merger": "VAE 融合",
|
||
"VAE type for decode": "用于解码的 VAE 类型",
|
||
"VAE type for encode": "用于编码的 VAE 类型",
|
||
"values": "固定值",
|
||
"Values closer to 0 closely match your training dataset, and values closer to 1 generalize more and deviate from your training dataset. Default is 1e-2, values lower than 0.1 are recommended. For D-Adaptation values between 0.02 and 0.04 are recommended": "越接近 0 的值越和训练数据集匹配，而越接近 1 的值则越泛化且偏离训练数据集。默认 1e-2，推荐使用小于 0.1 的值。对于 D-Adaptation 推荐取 0.02 至 0.04 之间的值。",
|
||
"Variational autoencoder": "变分自编码器",
|
||
"Variation seed": "变异随机种子",
|
||
"Variation strength": "变异强度",
|
||
"Vectors": "向量",
|
||
"Vector Studio": "Vector Studio - 矢量工作室",
|
||
"verbose console output": "将详细信息输出到控制台",
|
||
"version": "版本",
|
||
"Version": "版本",
|
||
"version 2.14.0 of the WebUI extension": "的 webui 扩展版本为: 2.14.0",
|
||
"vertical": "垂直",
|
||
"Vertical": "垂直",
|
||
"Vertical Mirroring": "垂直镜像",
|
||
"vertical only": "仅垂直方向",
|
||
"vertical split num": "垂直分割数",
|
||
"Very cheap approximation. Very fast compared to VAE, but produces pictures with 8 times smaller horizontal/vertical resolution and extremely low quality.": "性能很好的近似值。与VAE相比速度非常快，但生成的图片的水平/垂直分辨率是VAE的八分之一，质量极低",
|
||
"veryfast": "非常快",
|
||
"veryslow": "非常慢",
|
||
"vibrant": "vibrant (自然饱和度)",
|
||
"Vid2depth": "视频转深度",
|
||
"Video": "视频",
|
||
"Video Depth": "视频深度",
|
||
"Video encoding": "视频编码",
|
||
"Video Init": "视频初始化",
|
||
"Video init path": "初始化视频路径",
|
||
"video_init_path, extract_nth_frame, overwrite_extracted_frames": "视频初始化路径, 提取第N帧, 覆盖提取帧",
|
||
"Video init path/ URL": "视频初始化路径/链接",
|
||
"Video Input": "视频输入 ",
|
||
"video_input mode only, enables the extraction and use of a separate video file intended for use as a mask. White areas of the extracted video frames will not be affected by diffusion, while black areas will be fully effected. Lighter/darker areas are affected dynamically.": "仅 视频输入 模式使用，提取和使用单独的视频文件作为蒙版。提取的视频帧的白色区域将不受生成器的影响，而黑色区域将完全受到影响。较亮/较暗的区域会受到动态影响。",
|
||
"Video mask path": "视频蒙版路径",
|
||
"Video Name": "视频名称",
|
||
"Video output": "视频输出",
|
||
"Video Output Settings": "视频输出设置",
|
||
"Video Segment Duration (seconds)": "视频片段长度（秒）",
|
||
"Video to get Depth from": "从视频中获取深度",
|
||
"Video to Interpolate": "要插值的视频",
|
||
"Video to Upscale": "待放大视频",
|
||
"Video Upscaling": "视频放大",
|
||
"View changes": "查看更改",
|
||
"View saved data": "查看已保存数据",
|
||
"View the wiki for usage tips.": "点击查看 Wiki 获取使用说明",
|
||
"Vignette": "暗角",
|
||
". Visit": " 分隔。查看",
|
||
"Visualize": "可视化预览",
|
||
"visualize and make template": "可视化并制作模板",
|
||
"Visualize Cross-Attention": "Cross-Attention 可视化",
|
||
"Visual style": "视觉风格",
|
||
"vivid_light": "亮光",
|
||
"VRAM usage polls per second during generation.": "生成图像时, 每秒查询显存 (VRAM) 使用情况的次数",
|
||
"VRAM usage polls per second during generation. Set to 0 to disable.": "生成图像时，每秒查询显存 (VRAM) 使用情况的次数。设置为 0 可禁用",
|
||
"Want to figure out what a good prompt might be to create new images like an existing one? The CLIP Interrogator is here to get you answers!": "想知道生成类似于已有图像的新图像的最佳提示词是什么吗？CLIP Interrogator (CLIP 反推扩展) 将给你带来答案！",
|
||
"Warn if changes in caption is not saved": "在描述的更改未被保存时发出警告",
|
||
"WARNING : Settings are immediately applied but will not be saved until you click \"Save\"": "警告：设置修改后会立即应用，但在点击“保存”之前不会被保存",
|
||
"WARNING : Some visual settings are immediately applied but will not be saved until you click \"Save\"": "警告: 部分视觉设置修改后会立即应用, 但在点击 ”保存“ 之前不会被保存",
|
||
"(Warning: This is an external site and very likely contains NSFW examples!)": "(警告: 外部网站可能包含成人内容!)",
|
||
"watercolor": "watercolor (水彩)",
|
||
"Wave offset (ignore this if you don't know what it means)": "波形偏移（如果你不知道这是什么，忽略就好）",
|
||
"Waves color": "波形颜色",
|
||
"WD 1.4 Tagger": "WD 1.4 标签器",
|
||
"WDv1.4 Tagger Score Threshold": "WDv1.4 标签器评分阈值",
|
||
"WebUI State": "WebUI 状态",
|
||
"Weight": "权重",
|
||
"Weight 1": "权重 1",
|
||
"Weight 2": "权重 2",
|
||
"Weight 3": "权重 3",
|
||
"Weight 4": "权重 4",
|
||
"Weight 5": "权重 5",
|
||
"Weight Decay": "权重衰减",
|
||
"Weighted sum": "加权和",
|
||
"Weights": "权重",
|
||
"weights alpha": "权重 α",
|
||
"Weights alpha": "权重 α",
|
||
"weights beta": "权重 β",
|
||
"Weights beta": "权重 β",
|
||
"Weight schedule": "权重调度计划",
|
||
"Weights Presets": "权重预设",
|
||
"Weights setting": "权重设置",
|
||
"Weights Setting": "权重设置",
|
||
"Weight sum:A*(1-alpha)+B*alpha": "加权和: A*(1-α)+B*α",
|
||
"Weight threshold": "权重阈值",
|
||
"Weight values": "权重值",
|
||
"Weight_values": "权重值",
|
||
"What to put inside the masked area before processing it with Stable Diffusion.": "在使用 Stable Diffusion 处理蒙版区域前在其中放置什么",
|
||
"When adding extra network such as Hypernetwork or Lora to prompt, use this multiplier for it.": "当添加扩展模型 (如 Hypernetwork 或 Lora) 到提示词中时，默认使用此倍率。",
|
||
"When adding to prompt, refer to lora by": "在添加到提示词时，通过以下格式提及lora",
|
||
"When adding to prompt, refer to Lora by": "将扩展模型添加到提示词时，通过以下格式提及lora",
|
||
"when checked, do not output a video": "启用时, 不输出视频",
|
||
"When enabled, a checkpoint will be generated at the specified epoch intervals while training is active. This also controls manual generation using the 'save weights' button while training is active.": "启用本选项后，会在训练过程中以特定间隔 (多少个 Epochs) 生成模型。同时也能使用 “保存权重” 按钮来手动生成模型。",
|
||
"When enabled, a checkpoint will be generated when training completes successfully.": "启用本选项后，会在训练顺利完成后生成一个模型。",
|
||
"When enabled, a checkpoint will be generated when training is canceled by the user.": "本选项启用后，会在训练被用户取消时生成一个模型。",
|
||
"When enabled, a unique snapshot of the diffusion weights will be saved at each specified epoch interval. This uses more HDD space (A LOT), but allows resuming from training, including the optimizer state.": "启用本选项后，训练过程中会在特定时间间隔 (多少个 Epochs) 独立保存 diffusion 权重快照。这会使用非常多的硬盘空间，但可以从训练中恢复包括优化器状态之类的参数。",
|
||
"When enabled, a unique snapshot of the diffusion weights will be saved when training completes. This uses more HDD space, but allows resuming from training including the optimizer state.": "启用本选项后，训练顺利完成后会独立保存一个 diffusion 权重快照。这会使用更多的硬盘空间，但可以从训练中恢复包括优化器状态之类的参数。",
|
||
"When enabled, a unique snapshot of the diffusion weights will be saved when training is canceled. This uses more HDD space, but allows resuming from training including the optimizer state.": "启用本选项后，训练被手动取消时会独立保存一个 diffusion 权重快照。这会使用更多的硬盘空间，但可以从训练中恢复包括优化器状态之类的参数。",
|
||
"When enabled, checkpoints will be saved to a subdirectory in the selected checkpoints folder.": "启用本选项时，模型会保存到指定的模型保存子目录。",
|
||
"When enabled, tags after the first ',' in a prompt will be randomly ordered, which can potentially improve training.": "启用后，在提示词中第一个\", \"之后的标签将随机打乱，也许能改善训练效果。",
|
||
"when enabled, will re-extract video frames each run. When using video_input mode, the run will be instructed to write video frames to the drive. If you’ve already populated the frames needed, uncheck this box to skip past redundant extraction, and immediately start the render. If you have not extracted frames, you must run at least once with this box checked to write the necessary frames.": "启用时，将在每次运行时重新提取视频帧。使用 视频输入 模式时，运行程序将视频帧写入驱动器。如果已经填充了所需的帧，请取消选中此框以跳过多余的提取，然后立即开始渲染。如果尚未提取帧，则必须在选中此框的情况下至少运行一次，以写入必要的帧。",
|
||
"When loading models attempt stream loading optimized for slow or network storage": "为低速硬盘或网络存储使用流式模型加载优化",
|
||
"When loading models attempt to reuse previous model dictionary": "加载模型时尝试复用上一模型的字典",
|
||
"When 'Pause After N Epochs' is greater than 0, this is the amount of time, in seconds, that training will be paused for": "当 \"完成 N Epochs 后暂停\" 选项设置大于 0 时，每次暂停的时间 (单位: 秒)。",
|
||
"When performing the backwards pass, gradients will be set to none, instead of creating a new empty tensor. This will slightly improve VRAM.": "在执行反向传播时，梯度会设置为无，并不会创建一个新的空 tensor 。可略微改善显存用量。",
|
||
"(when reading generation parameters from text into UI)": "(适用于从文本中读取生成参数并应用到用户界面时)",
|
||
"(when reading generation parameters from text into UI))": "(适用于从文本中读取生成参数并应用到用户界面时)",
|
||
"When reading generation parameters from text into UI (from PNG info or pasted text), do not change the selected model/checkpoint.": "当从 PNG 图片信息或粘贴文本读取生成参数到用户界面时，不根据参数更改当前选定模型",
|
||
"When searched": "检索时",
|
||
"(\"When searched\" option will only show the item when the search string has 4 characters or more)": "(\"检索时\" 选项只有当搜索字符串有4个或更多字符时, 才会显示隐藏栏目)",
|
||
"when this box is checked, and FFMPEG mp4 is selected as the output format, an audio file will be multiplexed with the video.": "选中此框并以 FFMPEG mp4 为输出格式时, 音频文件将与视频复用",
|
||
"When this box is checked latents will be cached. Caching latents will use more VRAM, but improve training speed.": "启用本选项时，将缓存潜变量 。缓存的潜变量会占用更多显存，但能提高训练速度。",
|
||
"(When using controlnet together, you can put in large values (even 1.0 is possible).)": "（当使用 ControlNet 进行配合时，你可以尝试设置更大的值（甚至1.0都可以）。）",
|
||
"When using [filewords], this is the class identifier to use/find in existing prompts. Should be a single word.": "使用 [filewords] 时，这是在现有提示词中使用或查找的类别标识符。应是单词。",
|
||
"When using [filewords], this is the class to use when building prompts.": "使用 [filewords] 时，这是编写提示词时使用的类别。",
|
||
"When using [filewords], this is the instance identifier that is unique to your subject. Should be a single word.": "使用 [filewords] 时，这是主题独有的实例标识符。应是单词。",
|
||
"When using [filewords], this is the subject to use when building prompts.": "使用 [filewords] 时，这是编写提示词时使用的主题。",
|
||
"When using 'Save' button, only save a single selected image": "使用“保存”按钮时，只保存一个选定的图像",
|
||
"When using \"Save\" button, save images to a subdirectory": "使用 “保存” 按钮时，将图像保存到子目录",
|
||
"When you are done click the": "点击 ",
|
||
"When you fill in the Overwrite subject field, that subject will be used to build the dynamic prompt around. It is best, if you set the subject type to match the subject. For example, set it to humanoid if you place a person in the override subject field.": "填写覆盖主题词段将被用来建立动态提示词。最好把主题类型设置为与主题相匹配。例如：如果你在覆盖主题词段中放置一个人，就把它设置为人形。",
|
||
"Where to save Controlnet data?": "在哪保存 Controlnet 数据？",
|
||
"Whether to use optical flow to blend frames during cadence (if cadence more than 1)": "在生成间隔期间，使用光流法渲染帧（即使间隔大于1）",
|
||
"Which algorithm to use to produce the image": "使用哪种算法生成图像",
|
||
"whimsical": "whimsical (奇幻)",
|
||
"White is Opaque": "白色不透明",
|
||
"Whitelist": "白名单",
|
||
"Whole picture": "整张图片",
|
||
"wide": "wide (宽图)",
|
||
"width": "宽度",
|
||
"Width": "宽度",
|
||
"Width/height limit for the above option, in pixels": "上述选项的 宽/高 限制 (单位: 像素)",
|
||
"[wiki]": "[Wiki]",
|
||
"wiki": "Wiki",
|
||
"Wildcards": "通配符",
|
||
"Wildcards can be used and the joiner can also be specified:": "可以用通配符，也可以指定拼接符",
|
||
"Wildcards file": "通配符文件",
|
||
"Wildcards Manager": "通配符管理",
|
||
"(will append after comma if the above is enabled)": "(如启用了上方功能，则在逗号后追加)",
|
||
"Will be added to prompt along with Lora": "会和 Lora 一起添加到提示词中",
|
||
"will do nothing!": "将不生效!",
|
||
"will ignore all motion parameters and attempt to reference a video loaded into the runtime, specified by the video_init_path. Max_frames is ignored during video_input mode, and instead, follows the number of frames pulled from the video’s length. Resume_from_timestring is NOT available with Video_Input mode.": "将忽略所有的运动参数，并试图引用加载到运行环境的视频，由视频初始化路径指定。在视频输入模式下，最大帧数会被忽略，而是遵循从视频长度中提取的帧数。从时间字符串恢复选项在视频输入模式下不可用。",
|
||
"(will keep models other than the currently used one in RAM rather than VRAM)": "(在内存而不是显存中保留除当前使用模型以外的其他模型)",
|
||
"will output a greyscale depth map image alongside the output images.": "将与输出图像一起输出灰度深度图图像。",
|
||
"will then become available.": "文件放在相应目录就能被识别",
|
||
"Will upscale the image by the selected scale factor; use width and height sliders to set tile size": "按照选定的比例放大图像；使用长/宽拖动条以设置分块大小",
|
||
"(will use a third-party model on generation result to reconstruct faces)": "(使用第三方模型对生成图像的人脸进行修复)",
|
||
"(Will use & prefer the native activation keywords settable in the extra networks UI. Other functionality requires the": "(使用并优先使用在扩展网络 UI 中设置的本地激活关键词。其他功能需要安装 ",
|
||
"(WIP, expect some bugs)": "(未完成, 存在一定的问题)",
|
||
"With confidence": "输出置信度权重",
|
||
"With img2img, do exactly the amount of steps the slider specifies.": "图生图时，准确执行滑块指定的迭代步数",
|
||
"With img2img, fill image's transparent parts with this color.": "在图生图中使用以下颜色填充透明区域",
|
||
"With img2img, fill transparent parts of the input image with this color.": "图生图时, 用本选项设置的颜色填充到输入图像的透明部分",
|
||
"With Workflow mode, you turn off the automatic generation of new prompts on ‘generate’, and it will use the Workflow prompt field instead. So you can work and finetune any fun prompts without turning of the script.": "在工作流模式下，关闭了 \"生成 \"时自动生成新提示词的功能，它会使用工作流提示词作为代替。因此可以在不打开脚本的情况下工作和对有趣的提示词进行微调。",
|
||
"word masks": " 提示词蒙版 ",
|
||
"words in here will be added to the start of all positive prompts": "这里的提示词将被添加到所有正向提示词的开头",
|
||
"Workflow": "工作流",
|
||
"Workflow assist": "工作流协助",
|
||
"Workflow assist, suggestions by redditor Woisek.": "工作流协助，由 redditor: Woisek 提出。",
|
||
"Workflow Editor": "工作流编辑器",
|
||
"Workflow mode, turns off prompt generation and uses below Workflow prompt instead.": "工作流模式：关闭提示词生成，使用以下的工作流提示词代替。",
|
||
"Workflow prompt": "工作流提示词",
|
||
"*Work In Progress*. All params below are going to be keyframable at some point. If you want to speedup the integration, join Deforum's development. 😉": "*正在开发*. 下面的所有参数在某些点是关键的。如果你想加快集成，请加入 Deforum 的开发。😉",
|
||
"wrap": "覆盖",
|
||
"Write all generated prompts to a file": "将所有生成的提示词写入文件",
|
||
"Write image to a directory (default - log/images) and generation parameters into csv file.": "将图像写入目录（默认 - log/images）并将生成参数写入 csv 表格文件",
|
||
"write merged model ID to": "将融合模型 ID 写入到",
|
||
"Write prompts to file: Create a new .txt file for every batch containing the prompt template as well as the generated prompts.": "将提示词写入文件：为每个包含提示词模板和生成提示词的批次创建一个新的 .txt 文件",
|
||
"Write weights to tags files": "写入权重到标签文件中",
|
||
"X center axis for 2D angle/zoom": "用于 2D 角度/缩放 的 X 轴中心",
|
||
"x center axis for 2D angle/zoom *only*": "2D 旋转/缩放中 X 轴的中心点",
|
||
"xmenber": "X 值",
|
||
"X panning": "X 轴平移量",
|
||
"xtype": "X 类型",
|
||
"X type": "X 轴类型",
|
||
"X Types": "X 轴类型",
|
||
"X values": "X 轴值",
|
||
"X Values": "X 轴值",
|
||
"X/Y plot": "X/Y 图表",
|
||
"X/Y/Z plot": "X/Y/Z 图表",
|
||
"XYZ plot": "XYZ 图",
|
||
"XYZ plot settings": "XYZ 图设置",
|
||
"Y center axis for 2D angle/zoom": "用于 2D 角度/缩放的 Y 轴中心",
|
||
"y center axis for 2D angle/zoom *only*": "2D 旋转/缩放中 Y 轴中心点",
|
||
"Yellow | Blue": "黄色 | 蓝色",
|
||
"Yes": "是",
|
||
"ymenber": "Y 值",
|
||
"You are using": "你正在使用 ",
|
||
"You can also choose the prompt seperator mode for use with Latent Couple extension": "可以选择提示词分隔模式来使用 Latent Couple 插件",
|
||
". You can also join this": ". 你同样可以加入这个",
|
||
"(you can also manually enter any of themes from the": "(你也可以手动输入任何 HF 主题空间名，参考 ",
|
||
"You can change the maximum execution time, by default it’s 30seconds.": "你可以调节最大执行时间，默认 30 秒。",
|
||
"You can choose a certain subject type, if you want to generate something more specific. It has the following types:": "需要生成更具体的图像, 可以选择主题类型。有以下几种：",
|
||
"You can enhance semantic segmentation for control_v11p_sd15_seg from lllyasviel. Non-semantic segmentation for Edit-Anything will be supported when they convert their models to lllyasviel format.": "你可以使用 lllyasviel 的 control_v11p_sd15_seg 模型进行语义分割。当模型转换为 lllyasviel 格式时，将还将支持Edit-Anything 的非语义分割。",
|
||
"You can enhance semantic segmentation for control_v11p_sd15_seg from lllyasviel. You can also utilize": "可以使用 lllyasviel 的 control_v11p_sd15_seg 模型强化语义分割功能。也可以使用 ",
|
||
"You can generate image layout either in single image or in batch. Since there might be A LOT of outputs, there is no gallery for preview. You need to go to the output folder for either single image or batch process.": "你可以生成单张或批量的图像分布。由于可能有大量图片输出，所以无法预览。你需要进入输出文件夹，查看和进行后续操作。",
|
||
"You can mask images by their categories via semantic segmentation. Please enter category ids (integers), separated by": "可通过语义分割将图像分类屏蔽。请输入类别ID (整数) , 以",
|
||
"You can mask images by their categories via semantic segmentation. Please enter category ids (integers), separated by +. Visit here for ade20k and here for coco to get category->id map. Note that coco jumps some numbers, so the actual ID is line_number - 21.": "你可以通过语义分割模型按类别创建蒙版。请输入类别 ID（整数），用+分隔。可以访问 [这里] 获取 ade20k 的分类列表，或者 [这里] 获取 coco 的分类列表。注意，coco 会略过一些数字，所以实际的 ID 是列表中编号 -21。",
|
||
"You can put any image or images or video you like in the background.": "你可以任何你喜欢的图像或者视频放在背景中。",
|
||
"You can put comma seperated values here, those will be ignored from any list processing. For example, adding \"\"film grain, sepia\"\", will make these values not appear during generation.": "可以填入用逗号隔开的提示词，这些提示词包含的值将会在所有列表处理中被忽略。例如，添加 “”film grain, sepia“” ，将会使得这些提示词包含的值在生成时不出现。",
|
||
"(you can set per-model VAE either by editing user metadata for checkpoints, or by making the VAE have same name as checkpoint)": "(可通过编辑大模型的用户元数据或使 VAE 与大模型同名来逐个设置模型使用的 VAE)",
|
||
"You can specify in this field -> [Ebsynth Utility]->[configuration]->[stage 8]->[Background source]": "你可以在这里设置 -> [Ebsynth Utility]->[插件配置]->[步骤 8]->[背景源]",
|
||
"You can specify \"path_to_project_dir/inv/crossfade_tmp\".": "可以将其设置为“你的工程目录/inv/crossfade_tmp”。",
|
||
"You can stop the algorithm at any time": "你可以在任意时间停止图像增强算法",
|
||
"You can toggle the separator mode. Standardly this is a comma, but you can choose an AND or a BREAK.": "可以切换提示词分隔符。标准设置应该为逗号，但现在可以选择 AND 或者 BREAK 。",
|
||
"You can try it by own, to dig more deeper into Abyss ...": "可自行探索，以窥深渊...",
|
||
"You can turn it off and maybe add your own in the prefix or suffix prompt fields": "可以关闭本选项，然后可以在前缀或后缀提示词段中添加自己想要指定的艺术家。",
|
||
"You can use this as a guided image tool or as a looper depending on your settings in the keyframe images field. \n Set the keyframes and the images that you want to show up. \n Note: the number of frames between each keyframe should be greater than the tweening frames.": "根据关键帧图像字段中的设置，可以将其用作引导图像工具或循环器。\n设置要显示的关键帧和图像。\n注意：每个关键帧之间的帧数应大于中间帧。",
|
||
"You can use this as a guided image tool or as a looper depending on your settings in the keyframe images field. \n Set the keyframes and the images that you want to show up. \n Note: the number of frames between each keyframe should be greater than the tweening frames.": "根据关键帧图像字段中的设置，可以将其用作引导图像工具或循环器。\n设置要显示的关键帧和图像。\n注意：每个关键帧之间的帧数应大于中间帧。",
|
||
"You can use this as a guided image tool or as a looper depending on your settings in the keyframe images field. \n Set the keyframes and the images that you want to show up. \n Note: the number of frames between each keyframe should be greater than the tweening frames.": "可以将其作为引导图像工具或循环工具来使用，具体取决于您在关键帧图像字段的设置。\n 设置想要展示的关键帧和图像。\n 注意：每个关键帧之间的帧数应大于过渡帧。",
|
||
"You DID NOT load any model!": "你还没有加载任何模型！",
|
||
"You don't need a mask to composite video. But, Mask types can control the way that video is composited with the previous image each frame.": "合成视频不需要蒙版。但蒙版类型可以控制视频与上一帧图像合成的方式。",
|
||
"You may configurate automatic sam generation. ": "你可以配置自动 SAM 的参数。",
|
||
"You may configurate automatic sam generation. See": "可以配置以下项目来自动 SAM 。查看",
|
||
"You may configurate the following items and generate masked image for all images under a directory. This mode is designed for generating LoRA/LyCORIS training set.": "配置以下项目，为目录下所有图像生成蒙版。该模式用于生成 LoRA / LyCORIS 训练集。",
|
||
"You must enter text prompts to enable groundingdino. Otherwise this extension will fall back to point prompts only.": "必须输入文本提示词才能启用 GroundingDINO，否则将仅使用标记点。",
|
||
"You probably want this to be 'fp16'.": "你可能想要设置为半精度 (fp16)。",
|
||
"Your Civitai API Key": "Civitai API 密钥",
|
||
"Your Civitai Link Key": "Civitai Link 密钥",
|
||
"Y panning": "Y 轴平移量",
|
||
"ytype": "Y 类型",
|
||
"Y type": "Y 轴类型",
|
||
"Y Types": "Y 轴类型",
|
||
"Y values": "Y 轴值",
|
||
"Y Values": "Y 轴值",
|
||
"z-a": "按首字母倒序",
|
||
"zeros": "空",
|
||
"zeros will not add any new pixel information": "空模式下不会添加任何新的像素信息",
|
||
"Zip": "打包下载",
|
||
"ZIP Code": "邮政编码",
|
||
"ZoeDepth was not trained on panoramic images. It doesn't know anything about panoramas or spherical projection. Here, we just treat the estimated depth as radius and some projection errors are expected. Nonetheless, ZoeDepth still works surprisingly well on 360 reconstruction.": "ZoeDepth 不是基于全景图像上训练的。它无法识别全景图或球形投影的特征。在这个选项卡，它仅把估计的深度当作半径，所以会产生一些预料中的投影误差。尽管如此，ZoeDepth 在 360° 重建模型上仍有令人惊讶的效果。",
|
||
"ZoeDepth was not trained on panoramic images. It doesn’t know anything about panoramas or spherical projection. Here, we just treat the estimated depth as radius and some projection errors are expected. Nonetheless, ZoeDepth still works surprisingly well on 360 reconstruction.": "ZoeDepth 不是基于全景图像上训练的。它无法识别全景图或球形投影的特征。在这个选项卡，它仅把估计的深度当作半径，所以会产生一些预料中的投影误差。尽管如此，ZoeDepth 在 360° 重建模型上仍有令人惊讶的效果。",
|
||
"Zoom": "缩放",
|
||
"Zoom canvas": "画布缩放",
|
||
"Zoom in masked area": "缩放遮罩区域",
|
||
"Z type": "Z 轴类型",
|
||
"Z values": "Z 轴值",
|
||
"Apply Style": "应用样式",
|
||
"SixGod_K提示词": "六神提示词",
|
||
"清空正面提示词": "清空正向提示词",
|
||
"清空负面提示词": "清空反向提示词"
|
||
}
|